From 080b7643fb93ad058ab40da27533d7b9ed8b6c6d Mon Sep 17 00:00:00 2001 From: Michael Schwingen Date: Mon, 23 May 2011 00:00:07 +0200 Subject: update/fix AcTux4 board Signed-off-by: Michael Schwingen --- board/actux4/actux4.c | 103 ++++++++++++++++++++++++++++--------------------- board/actux4/config.mk | 4 -- 2 files changed, 59 insertions(+), 48 deletions(-) delete mode 100644 board/actux4/config.mk (limited to 'board/actux4') diff --git a/board/actux4/actux4.c b/board/actux4/actux4.c index f373b58777..d20d881eaf 100644 --- a/board/actux4/actux4.c +++ b/board/actux4/actux4.c @@ -35,92 +35,107 @@ #include #include #include - +#include #include +#ifdef CONFIG_PCI +#include +#include +#endif #include "actux4_hw.h" DECLARE_GLOBAL_DATA_PTR; -int board_init (void) +int board_early_init_f(void) +{ + writel(0xbd113c42, IXP425_EXP_CS1); + return 0; +} + +int board_init(void) { gd->bd->bi_arch_number = MACH_TYPE_ACTUX4; /* adress of boot parameters */ gd->bd->bi_boot_params = 0x00000100; - GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_nPWRON); - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_nPWRON); + GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_nPWRON); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_nPWRON); - GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST); + GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); /* led not populated on board*/ - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED3); - GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED3); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED3); + GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED3); /* middle LED */ - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED2); - GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED2); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED2); + GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED2); /* right LED */ /* weak pulldown = LED weak on */ - GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_LED1); - GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED1); + GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_LED1); + GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED1); /* Setup GPIO's for Interrupt inputs */ - GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTA); - GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTB); - GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTC); - GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_RTCINT); - GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI_INTA); - GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI_INTB); - - GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTA); - GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTB); - GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTC); - GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_RTCINT); - GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI_INTA); - GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI_INTB); + GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTA); + GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTB); + GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTC); + GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RTCINT); + GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA); + GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB); + + GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTA); + GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTB); + GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTC); + GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RTCINT); + GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA); + GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB); /* Setup GPIO's for 33MHz clock output */ - *IXP425_GPIO_GPCLKR = 0x011001FF; - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK); - GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK); - - *IXP425_EXP_CS1 = 0xbd113c42; + writel(0x011001FF, IXP425_GPIO_GPCLKR); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); + GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - udelay (10000); - GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST); - udelay (10000); - GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST); - udelay (10000); - GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST); + udelay(10000); + GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); + udelay(10000); + GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); + udelay(10000); + GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); return 0; } /* Check Board Identity */ -int checkboard (void) +int checkboard(void) { - puts ("Board: AcTux-4\n"); - return (0); + puts("Board: AcTux-4\n"); + return 0; } -int dram_init (void) +int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); + return 0; +} - return (0); +#ifdef CONFIG_PCI +struct pci_controller hose; + +void pci_init_board(void) +{ + pci_ixp_init(&hose); } +#endif /* * Hardcoded flash setup: * Flash 0 is a non-CFI SST 39VF020 flash, 8 bit flash / 8 bit bus. * Flash 1 is an Intel *16 flash using the CFI driver. */ -ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) +ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) { if (banknum == 0) { /* non-CFI boot flash */ info->portwidth = 1; diff --git a/board/actux4/config.mk b/board/actux4/config.mk deleted file mode 100644 index 9cb838b738..0000000000 --- a/board/actux4/config.mk +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x00e00000 - -# include NPE ethernet driver -BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o -- cgit v1.2.3