summaryrefslogtreecommitdiff
path: root/common/cmd_sf.c
AgeCommit message (Collapse)Author
2012-04-03cmd_sf: add size checking to spi flash commandsGerlando Falauto
SPI flash operations inadvertently stretching beyond the flash size will result in a wraparound. This may be particularly dangerous when burning u-boot, because the flash contents will be corrupted rendering the board unusable, without any warning being issued. So add a consistency checking so not to overflow past the flash size. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-06Convert cmd_usage() calls in common to use a return valueSimon Glass
Change all files in common/ to use CMD_RET_USAGE instead of calling cmd_usage() directly. I'm not completely sure about this patch since the code since impact is small (100 byte or so on ARM) and it might need splitting into smaller patches. But for now here it is. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-02-12sf command: allow default bus and chip selectsEric Nelson
This patch allows a board configuration file to provide default bus and chip-selects for SPI flash so that first argument to the 'sf' command is optional. On boards that use the mxc_spi driver and a GPIO for chip select, this allows a much simpler command line: U-Boot> sf probe instead of U-Boot> sf probe 0x5300 Tested-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-17cmd_sf.c: fix printf() length modifierAndreas Bießmann
size_t is not always 'unsigned int', use corret length modifer. This patch fixes following warning: ---8<--- cmd_sf.c: In function 'spi_flash_update_block': cmd_sf.c:130: warning: format '%#x' expects type 'unsigend int', but argument 4 has type 'size_t' cmd_sf.c:135: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'size_t' --->8--- Signed-off-by: Andreas Bießmann <biessmann@corscience.de> cc: Mike Frysinger <vapier@gentoo.org> cc: Thomas Chou <thomas@wytron.com.tw> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-05cmd_sf: Fix compiler warningKumar Gala
cmd_sf.c: In function 'do_spi_flash': cmd_sf.c:164:9: warning: 'skipped' may be used uninitialized in this function Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Simon Glass <sjg@chromium.org>
2011-09-29cmd_sf: add "update" subcommand to do smart SPI flash updateSimon Glass
This adds a new SPI flash command which only rewrites blocks if the contents need to change. This can speed up SPI flash programming when much of the data is unchanged from what is already there. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-09-07common: fix behavior of ROUND macro when input is already roundedAnton Staaf
Currently when you call ROUND with a value that is already a multiple of the second parameter it will return a value that is one multiple larger, instead of returning the value passed in. There are only two types of usage of ROUND currently, one in various config files to round CONFIG_SYS_MALLOC_LEN to a multiple of 4096 bytes. The other in cmd_sf.c where the incorrect behavior of ROUND is worked around be subtracting one from the length argument before passing it to ROUND. This patch fixes ROUND and removes the workaround from cmd_sf. It also results in all of the malloc pools that use ROUND to compute their size shrinking by 4KB. Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Mike Frysinger <vapier@gentoo.org>
2011-04-12cmd_sf: use cmd_usage() in more placesMike Frysinger
Requires a little reworking of the code flow with sub-functions, but not a big deal. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12cmd_sf: drop device status message when probingMike Frysinger
The common spi flash layer displays useful info when probing, so no need for us to duplicate that. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-12cmd_sf: add handler for +len arg for erase commandRichard Retanubun
This patch adds [+]len handler for the erase command that will automatically round up the requested erase length to the flash's sector_size. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-24cmd_usage(): simplify return code handlingWolfgang Denk
Lots of code use this construct: cmd_usage(cmdtp); return 1; Change cmd_usage() let it return 1 - then we can replace all these ocurrances by return cmd_usage(cmdtp); This fixes a few places with incorrect return code handling, too. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-04Make sure that argv[] argument pointers are not modified.Wolfgang Denk
The hush shell dynamically allocates (and re-allocates) memory for the argument strings in the "char *argv[]" argument vector passed to commands. Any code that modifies these pointers will cause serious corruption of the malloc data structures and crash U-Boot, so make sure the compiler can check that no such modifications are being done by changing the code into "char * const argv[]". This modification is the result of debugging a strange crash caused after adding a new command, which used the following argument processing code which has been working perfectly fine in all Unix systems since version 6 - but not so in U-Boot: int main (int argc, char **argv) { while (--argc > 0 && **++argv == '-') { /* ====> */ while (*++*argv) { switch (**argv) { case 'd': debug++; break; ... default: usage (); } } } ... } The line marked "====>" will corrupt the malloc data structures and usually cause U-Boot to crash when the next command gets executed by the shell. With the modification, the compiler will prevent this with an error: increment of read-only location '*argv' N.B.: The code above can be trivially rewritten like this: while (--argc > 0 && **++argv == '-') { char *arg = *argv; while (*++arg) { switch (*arg) { ... Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2009-10-24sf: add GPL-2 license infoMike Frysinger
Some of the new spi flash files were missing explicit license lines. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-07-14Command for accessing serial flash updateTsiChung Liew
Change strtoul number base of argv 3 from 0 to 16 Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-06-12General help message cleanupWolfgang Denk
Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-01-28Command usage cleanupPeter Tyser
Remove command name from all command "usage" fields and update common/command.c to display "name - usage" instead of just "usage". Also remove newlines from command usage fields. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-28Standardize command usage messages with cmd_usage()Peter Tyser
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-06-03SPI Flash: Add "sf" commandHaavard Skinnemoen
This adds a new command, "sf" which can be used to manipulate SPI flash. Currently, initialization, reading, writing and erasing is supported. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>