summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/ahci.c2
-rw-r--r--drivers/block/ata_piix.c30
-rw-r--r--drivers/block/ata_piix.h2
-rw-r--r--drivers/block/fsl_sata.c16
-rw-r--r--drivers/block/sata_sil3114.c4
-rw-r--r--drivers/block/sil680.c28
-rw-r--r--drivers/block/sym53c8xx.c6
-rw-r--r--drivers/block/systemace.c28
-rw-r--r--drivers/hwmon/adm1021.c4
-rw-r--r--drivers/hwmon/ds1621.c4
-rw-r--r--drivers/hwmon/ds1775.c6
-rw-r--r--drivers/hwmon/lm73.c4
-rw-r--r--drivers/hwmon/lm75.c10
-rw-r--r--drivers/i2c/fsl_i2c.c22
-rw-r--r--drivers/i2c/mxc_i2c.c8
-rw-r--r--drivers/i2c/omap1510_i2c.c4
-rw-r--r--drivers/i2c/omap24xx_i2c.c4
-rw-r--r--drivers/i2c/soft_i2c.c18
-rw-r--r--drivers/i2c/tsi108_i2c.c20
-rw-r--r--drivers/input/i8042.c6
-rw-r--r--drivers/input/keyboard.c4
-rw-r--r--drivers/input/ps2ser.c12
-rw-r--r--drivers/misc/fsl_law.c6
-rw-r--r--drivers/misc/ns87308.c72
-rw-r--r--drivers/mmc/atmel_mci.c22
-rw-r--r--drivers/mtd/cfi_flash.c102
-rw-r--r--drivers/mtd/dataflash.c14
-rw-r--r--drivers/mtd/jedec_flash.c8
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c2
-rw-r--r--drivers/mtd/nand/nand.c14
-rw-r--r--drivers/mtd/nand/nand_base.c6
-rw-r--r--drivers/mtd/nand/s3c64xx.c12
-rw-r--r--drivers/mtd/nand_legacy/nand_legacy.c12
-rw-r--r--drivers/mtd/onenand/onenand_uboot.c2
-rw-r--r--drivers/mtd/spi/spi_flash_internal.h6
-rw-r--r--drivers/mtd/spi/stmicro.c2
-rw-r--r--drivers/net/bcm570x.c14
-rw-r--r--drivers/net/bfin_mac.c2
-rw-r--r--drivers/net/cs8900.c6
-rw-r--r--drivers/net/dm9000x.c2
-rw-r--r--drivers/net/eepro100.c32
-rw-r--r--drivers/net/fsl_mcdmafec.c60
-rw-r--r--drivers/net/lan91c96.c2
-rw-r--r--drivers/net/macb.c44
-rw-r--r--drivers/net/mcffec.c64
-rw-r--r--drivers/net/ne2000_base.c2
-rw-r--r--drivers/net/netarm_eth.c4
-rw-r--r--drivers/net/ns7520_eth.c4
-rw-r--r--drivers/net/ns9750_eth.c4
-rw-r--r--drivers/net/phy/miiphybb.c6
-rw-r--r--drivers/net/sk98lin/h/skdrv1st.h2
-rw-r--r--drivers/net/sk98lin/h/skgehw.h6
-rw-r--r--drivers/net/sk98lin/skgeinit.c4
-rw-r--r--drivers/net/sk98lin/u-boot_compat.h2
-rw-r--r--drivers/net/smc91111.c2
-rw-r--r--drivers/net/tsec.c10
-rw-r--r--drivers/net/tsi108_eth.c2
-rw-r--r--drivers/net/vsc7385.c12
-rw-r--r--drivers/pci/pci.c2
-rw-r--r--drivers/pci/pci_auto.c8
-rw-r--r--drivers/pci/tsi108_pci.c38
-rw-r--r--drivers/pci/w83c553f.c4
-rw-r--r--drivers/pcmcia/i82365.c12
-rw-r--r--drivers/pcmcia/marubun_pcmcia.c32
-rw-r--r--drivers/pcmcia/mpc8xx_pcmcia.c32
-rw-r--r--drivers/pcmcia/pxa_pcmcia.c12
-rw-r--r--drivers/pcmcia/ti_pci1410a.c14
-rw-r--r--drivers/pcmcia/tqm8xx_pcmcia.c26
-rw-r--r--drivers/qe/uec.c84
-rw-r--r--drivers/rtc/ds1306.c16
-rw-r--r--drivers/rtc/ds1307.c10
-rw-r--r--drivers/rtc/ds1337.c8
-rw-r--r--drivers/rtc/ds1374.c18
-rw-r--r--drivers/rtc/ds1556.c2
-rw-r--r--drivers/rtc/ds164x.c2
-rw-r--r--drivers/rtc/ds174x.c2
-rw-r--r--drivers/rtc/ds3231.c4
-rw-r--r--drivers/rtc/isl1208.c4
-rw-r--r--drivers/rtc/m41t11.c48
-rw-r--r--drivers/rtc/m41t60.c16
-rw-r--r--drivers/rtc/m41t62.c6
-rw-r--r--drivers/rtc/m48t35ax.c4
-rw-r--r--drivers/rtc/max6900.c8
-rw-r--r--drivers/rtc/mc146818.c8
-rw-r--r--drivers/rtc/mcfrtc.c8
-rw-r--r--drivers/rtc/mpc5xxx.c4
-rw-r--r--drivers/rtc/mpc8xx.c4
-rw-r--r--drivers/rtc/pcf8563.c4
-rw-r--r--drivers/rtc/pl031.c8
-rw-r--r--drivers/rtc/rs5c372.c12
-rw-r--r--drivers/rtc/rx8025.c10
-rw-r--r--drivers/rtc/x1205.c4
-rw-r--r--drivers/serial/mcfuart.c10
-rw-r--r--drivers/serial/ns16550.c4
-rw-r--r--drivers/serial/serial.c42
-rw-r--r--drivers/spi/mpc8xxx_spi.c4
-rw-r--r--drivers/spi/soft_spi.c10
-rw-r--r--drivers/usb/sl811_usb.c4
-rw-r--r--drivers/usb/usb_ohci.c30
-rw-r--r--drivers/usb/usb_ohci.h6
-rw-r--r--drivers/usb/usbdcore_mpc8xx.c20
-rw-r--r--drivers/video/ati_radeon_fb.c6
-rw-r--r--drivers/video/cfb_console.c12
-rw-r--r--drivers/video/ct69000.c2
-rw-r--r--drivers/video/mb862xx.c2
-rw-r--r--drivers/video/smiLynxEM.c6
-rw-r--r--drivers/video/videomodes.c2
-rw-r--r--drivers/video/videomodes.h4
108 files changed, 723 insertions, 723 deletions
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 52fd1080e6..2445e8c62e 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -676,7 +676,7 @@ void scsi_low_level_init(int busdevfunc)
linkmap = probe_ent->link_port_map;
- for (i = 0; i < CFG_SCSI_MAX_SCSI_ID; i++) {
+ for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
if (((linkmap >> i) & 0x01)) {
if (ahci_port_start((u8) i)) {
printf("Can not start port %d\n", i);
diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c
index 4c26b36f5a..ec3768711a 100644
--- a/drivers/block/ata_piix.c
+++ b/drivers/block/ata_piix.c
@@ -35,7 +35,7 @@
#include <ide.h>
#include <ata.h>
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
extern int curr_device;
#define DEBUG_SATA 0 /*For debug prints set DEBUG_SATA to 1 */
@@ -173,10 +173,10 @@ init_sata (int dev)
iobase4 | ATA_PCI_CTL_OFS;
port[1].ioaddr.bmdma_addr = iobase5 + 0x8;
- for (i = 0; i < CFG_SATA_MAXBUS; i++)
+ for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++)
sata_port (&port[i].ioaddr);
- for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+ for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
if (!(sata_bus_probe (i))) {
port[i].port_state = 0;
printf ("SATA#%d port is not present \n", i);
@@ -190,15 +190,15 @@ init_sata (int dev)
}
}
- for (i = 0; i < CFG_SATA_MAXBUS; i++) {
+ for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) {
u8 j, devno;
if (port[i].port_state == 0)
continue;
- for (j = 0; j < CFG_SATA_DEVS_PER_BUS; j++) {
+ for (j = 0; j < CONFIG_SYS_SATA_DEVS_PER_BUS; j++) {
sata_identify (i, j);
set_Feature_cmd (i, j);
- devno = i * CFG_SATA_DEVS_PER_BUS + j;
+ devno = i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
if ((sata_dev_desc[devno].lba > 0) &&
(sata_dev_desc[devno].blksz > 0)) {
dev_print (&sata_dev_desc[devno]);
@@ -206,7 +206,7 @@ init_sata (int dev)
init_part (&sata_dev_desc[devno]);
if (curr_device < 0)
curr_device =
- i * CFG_SATA_DEVS_PER_BUS + j;
+ i * CONFIG_SYS_SATA_DEVS_PER_BUS + j;
}
}
}
@@ -271,7 +271,7 @@ sata_bus_softreset (int num)
port[num].dev_mask = 0;
- for (i = 0; i < CFG_SATA_DEVS_PER_BUS; i++) {
+ for (i = 0; i < CONFIG_SYS_SATA_DEVS_PER_BUS; i++) {
if (!(sata_devchk (&port[num].ioaddr, i))) {
PRINTF ("dev_chk failed for dev#%d\n", i);
} else {
@@ -328,7 +328,7 @@ sata_bus_softreset (int num)
void
sata_identify (int num, int dev)
{
- u8 cmd = 0, status = 0, devno = num * CFG_SATA_DEVS_PER_BUS + dev;
+ u8 cmd = 0, status = 0, devno = num * CONFIG_SYS_SATA_DEVS_PER_BUS + dev;
u16 iobuf[ATA_SECT_SIZE];
u64 n_sectors = 0;
u8 mask = 0;
@@ -564,10 +564,10 @@ sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buff)
}
#endif
/*Port Number */
- num = device / CFG_SATA_DEVS_PER_BUS;
+ num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
/*dev on the port */
- if (device >= CFG_SATA_DEVS_PER_BUS)
- dev = device - CFG_SATA_DEVS_PER_BUS;
+ if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+ dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
else
dev = device;
@@ -671,10 +671,10 @@ sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff)
}
#endif
/*Port Number */
- num = device / CFG_SATA_DEVS_PER_BUS;
+ num = device / CONFIG_SYS_SATA_DEVS_PER_BUS;
/*dev on the Port */
- if (device >= CFG_SATA_DEVS_PER_BUS)
- dev = device - CFG_SATA_DEVS_PER_BUS;
+ if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS)
+ dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS;
else
dev = device;
diff --git a/drivers/block/ata_piix.h b/drivers/block/ata_piix.h
index f9f0194706..11885af20e 100644
--- a/drivers/block/ata_piix.h
+++ b/drivers/block/ata_piix.h
@@ -88,7 +88,7 @@ int init_sata (int dev);
#endif
#ifdef DRV_DECL /*Defines Driver Specific variables */
-struct sata_port port[CFG_SATA_MAXBUS];
+struct sata_port port[CONFIG_SYS_SATA_MAXBUS];
#endif
#endif /* __ATA_PIIX_H__ */
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index 55f593a491..2009d1ecda 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -26,23 +26,23 @@
#include <fis.h>
#include "fsl_sata.h"
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
-#ifndef CFG_SATA1_FLAGS
- #define CFG_SATA1_FLAGS FLAGS_DMA
+#ifndef CONFIG_SYS_SATA1_FLAGS
+ #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
#endif
-#ifndef CFG_SATA2_FLAGS
- #define CFG_SATA2_FLAGS FLAGS_DMA
+#ifndef CONFIG_SYS_SATA2_FLAGS
+ #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
#endif
static struct fsl_sata_info fsl_sata_info[] = {
#ifdef CONFIG_SATA1
- {CFG_SATA1, CFG_SATA1_FLAGS},
+ {CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
#else
{0, 0},
#endif
#ifdef CONFIG_SATA2
- {CFG_SATA2, CFG_SATA2_FLAGS},
+ {CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
#else
{0, 0},
#endif
@@ -123,7 +123,7 @@ int init_sata(int dev)
int i;
fsl_sata_t *sata;
- if (dev < 0 || dev > (CFG_SATA_MAX_DEVICE - 1)) {
+ if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
printf("the sata index %d is out of ranges\n\r", dev);
return -1;
}
diff --git a/drivers/block/sata_sil3114.c b/drivers/block/sata_sil3114.c
index 8399737ff5..351cf993cc 100644
--- a/drivers/block/sata_sil3114.c
+++ b/drivers/block/sata_sil3114.c
@@ -48,9 +48,9 @@ static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus);
static void msleep (int count);
static u32 iobase[6] = { 0, 0, 0, 0, 0, 0}; /* PCI BAR registers for device */
-extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
-static struct sata_port port[CFG_SATA_MAX_DEVICE];
+static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE];
static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
{
diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c
index 052c3d3671..e21fb9b691 100644
--- a/drivers/block/sil680.c
+++ b/drivers/block/sil680.c
@@ -32,25 +32,25 @@
* #define CONFIG_PCI_PNP
* NOTE it may also be necessary to define this if the default of 8 is
* incorrect for the target board (e.g. the sequoia board requires 0).
- * #define CFG_PCI_CACHE_LINE_SIZE 0
+ * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0
*
* #define CONFIG_CMD_IDE
* #undef CONFIG_IDE_8xx_DIRECT
* #undef CONFIG_IDE_LED
* #undef CONFIG_IDE_RESET
* #define CONFIG_IDE_PREINIT
- * #define CFG_IDE_MAXBUS 2 - modify to suit
- * #define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) - modify to suit
- * #define CFG_ATA_BASE_ADDR 0
- * #define CFG_ATA_IDE0_OFFSET 0
- * #define CFG_ATA_IDE1_OFFSET 0
- * #define CFG_ATA_DATA_OFFSET 0
- * #define CFG_ATA_REG_OFFSET 0
- * #define CFG_ATA_ALT_OFFSET 0x0004
+ * #define CONFIG_SYS_IDE_MAXBUS 2 - modify to suit
+ * #define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) - modify to suit
+ * #define CONFIG_SYS_ATA_BASE_ADDR 0
+ * #define CONFIG_SYS_ATA_IDE0_OFFSET 0
+ * #define CONFIG_SYS_ATA_IDE1_OFFSET 0
+ * #define CONFIG_SYS_ATA_DATA_OFFSET 0
+ * #define CONFIG_SYS_ATA_REG_OFFSET 0
+ * #define CONFIG_SYS_ATA_ALT_OFFSET 0x0004
*
* The mapping for PCI IO-space.
* NOTE this is the value for the sequoia board. Modify to suit.
- * #define CFG_PCI0_IO_SPACE 0xE8000000
+ * #define CONFIG_SYS_PCI0_IO_SPACE 0xE8000000
*/
#include <common.h>
@@ -58,7 +58,7 @@
#include <ide.h>
#include <pci.h>
-extern ulong ide_bus_offset[CFG_IDE_MAXBUS];
+extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
int ide_preinit (void)
{
@@ -67,7 +67,7 @@ int ide_preinit (void)
int l;
status = 1;
- for (l = 0; l < CFG_IDE_MAXBUS; l++) {
+ for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
ide_bus_offset[l] = -ATA_STATUS;
}
devbusfn = pci_find_device (0x1095, 0x0680, 0);
@@ -77,11 +77,11 @@ int ide_preinit (void)
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
(u32 *) &ide_bus_offset[0]);
ide_bus_offset[0] &= 0xfffffff8;
- ide_bus_offset[0] += CFG_PCI0_IO_SPACE;
+ ide_bus_offset[0] += CONFIG_SYS_PCI0_IO_SPACE;
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2,
(u32 *) &ide_bus_offset[1]);
ide_bus_offset[1] &= 0xfffffff8;
- ide_bus_offset[1] += CFG_PCI0_IO_SPACE;
+ ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
/* init various things - taken from the Linux driver */
/* set PIO mode */
pci_write_config_byte(devbusfn, 0x80, 0x00);
diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c
index 44e998b556..0c60bf80e5 100644
--- a/drivers/block/sym53c8xx.c
+++ b/drivers/block/sym53c8xx.c
@@ -426,7 +426,7 @@ void scsi_bus_reset(void)
{
unsigned char t;
int i;
- int end = CFG_SCSI_SPIN_UP_TIME*1000;
+ int end = CONFIG_SYS_SCSI_SPIN_UP_TIME*1000;
t=scsi_read_byte(SCNTL1);
scsi_write_byte(SCNTL1,(t | CRST));
@@ -836,10 +836,10 @@ void scsi_chip_init(void)
scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */
scsi_write_byte(SCNTL1,0x00);
scsi_write_byte(SCNTL2,0x00);
-#ifndef CFG_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */
+#ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF /* config value for none 40 mhz clocks */
scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */
#else
- scsi_write_byte(SCNTL3,CFG_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
+ scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 mhz clocks */
#endif
scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */
scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */
diff --git a/drivers/block/systemace.c b/drivers/block/systemace.c
index dfaab528bf..e8dff0acf6 100644
--- a/drivers/block/systemace.c
+++ b/drivers/block/systemace.c
@@ -20,7 +20,7 @@
/*
* The Xilinx SystemACE chip support is activated by defining
- * CONFIG_SYSTEMACE to turn on support, and CFG_SYSTEMACE_BASE
+ * CONFIG_SYSTEMACE to turn on support, and CONFIG_SYS_SYSTEMACE_BASE
* to set the base address of the device. This code currently
* assumes that the chip is connected via a byte-wide bus.
*
@@ -47,25 +47,25 @@
/*
* The ace_readw and writew functions read/write 16bit words, but the
* offset value is the BYTE offset as most used in the Xilinx
- * datasheet for the SystemACE chip. The CFG_SYSTEMACE_BASE is defined
+ * datasheet for the SystemACE chip. The CONFIG_SYS_SYSTEMACE_BASE is defined
* to be the base address for the chip, usually in the local
* peripheral bus.
*/
-#if (CFG_SYSTEMACE_WIDTH == 8)
+#if (CONFIG_SYS_SYSTEMACE_WIDTH == 8)
#if !defined(__BIG_ENDIAN)
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \
- (readb(CFG_SYSTEMACE_BASE+off+1)))
-#define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \
- writeb(val, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)<<8) | \
+ (readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)))
+#define ace_writew(val, off) {writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off); \
+ writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
#else
-#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \
- (readb(CFG_SYSTEMACE_BASE+off+1)<<8))
-#define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \
- writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);}
+#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)) | \
+ (readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)<<8))
+#define ace_writew(val, off) {writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off); \
+ writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off+1);}
#endif
#else
-#define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off))
-#define ace_writew(val, off) (out16(CFG_SYSTEMACE_BASE+off,val))
+#define ace_readw(off) (in16(CONFIG_SYS_SYSTEMACE_BASE+off))
+#define ace_writew(val, off) (out16(CONFIG_SYS_SYSTEMACE_BASE+off,val))
#endif
/* */
@@ -120,7 +120,7 @@ block_dev_desc_t *systemace_get_dev(int dev)
/*
* Ensure the correct bus mode (8/16 bits) gets enabled
*/
- ace_writew(CFG_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
+ ace_writew(CONFIG_SYS_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
init_part(&systemace_dev);
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index b791ec0415..d753e9a72f 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -81,7 +81,7 @@ typedef
}
dtt_cfg_t;
-dtt_cfg_t dttcfg[] = CFG_DTT_ADM1021;
+dtt_cfg_t dttcfg[] = CONFIG_SYS_DTT_ADM1021;
int
dtt_read (int sensor, int reg)
@@ -174,7 +174,7 @@ dtt_init (void)
const char *const header = "DTT: ";
/* switch to correct I2C bus */
- I2C_SET_BUS(CFG_DTT_BUS_NUM);
+ I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
for (i = 0; i < sizeof(sensors); i++) {
if (_dtt_init(sensors[i]) != 0)
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 523f8bee51..d15a082df5 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -125,7 +125,7 @@ static int _dtt_init(int sensor)
/*
* Setup High Temp.
*/
- val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80;
+ val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80;
if (dtt_write(sensor, DTT_TEMP_HIGH, val) != 0)
return 1;
udelay(50000); /* Max 50ms */
@@ -133,7 +133,7 @@ static int _dtt_init(int sensor)
/*
* Setup Low Temp - hysteresis.
*/
- val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+ val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
if (dtt_write(sensor, DTT_TEMP_LOW, val) != 0)
return 1;
udelay(50000); /* Max 50ms */
diff --git a/drivers/hwmon/ds1775.c b/drivers/hwmon/ds1775.c
index 6a4d8e56db..80fb26f7b5 100644
--- a/drivers/hwmon/ds1775.c
+++ b/drivers/hwmon/ds1775.c
@@ -24,7 +24,7 @@
#include <i2c.h>
#include <dtt.h>
-#define DTT_I2C_DEV_CODE CFG_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
+#define DTT_I2C_DEV_CODE CONFIG_SYS_I2C_DTT_ADDR /* Dallas Semi's DS1775 device code */
#define DTT_READ_TEMP 0x0
#define DTT_CONFIG 0x1
#define DTT_TEMP_HYST 0x2
@@ -105,7 +105,7 @@ static int _dtt_init(int sensor)
/*
* Setup High Temp
*/
- val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80;
+ val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80;
if (dtt_write(sensor, DTT_TEMP_OS, val) != 0)
return 1;
udelay(50000); /* Max 50ms */
@@ -113,7 +113,7 @@ static int _dtt_init(int sensor)
/*
* Setup Low Temp - hysteresis
*/
- val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+ val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
return 1;
udelay(50000); /* Max 50ms */
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index dd24683536..7b5d893ff2 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -124,11 +124,11 @@ static int _dtt_init(int const sensor)
/*
* Setup THIGH (upper-limit) and TLOW (lower-limit) registers
*/
- val = CFG_DTT_MAX_TEMP << 7;
+ val = CONFIG_SYS_DTT_MAX_TEMP << 7;
if (dtt_write(sensor, DTT_TEMP_HIGH, val))
return -1;
- val = CFG_DTT_MIN_TEMP << 7;
+ val = CONFIG_SYS_DTT_MIN_TEMP << 7;
if (dtt_write(sensor, DTT_TEMP_LOW, val))
return -1;
/*
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 17379e5318..81198215ff 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -32,8 +32,8 @@
/*
* Device code
*/
-#if defined(CFG_I2C_DTT_ADDR)
-#define DTT_I2C_DEV_CODE CFG_I2C_DTT_ADDR
+#if defined(CONFIG_SYS_I2C_DTT_ADDR)
+#define DTT_I2C_DEV_CODE CONFIG_SYS_I2C_DTT_ADDR
#else
#define DTT_I2C_DEV_CODE 0x48 /* ON Semi's LM75 device */
#endif
@@ -124,12 +124,12 @@ static int _dtt_init(int sensor)
int val;
/* Setup TSET ( trip point ) register */
- val = ((CFG_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */
+ val = ((CONFIG_SYS_DTT_MAX_TEMP * 2) << 7) & 0xff80; /* trip */
if (dtt_write(sensor, DTT_TEMP_SET, val) != 0)
return 1;
/* Setup THYST ( untrip point ) register - Hysteresis */
- val = (((CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
+ val = (((CONFIG_SYS_DTT_MAX_TEMP - CONFIG_SYS_DTT_HYSTERESIS) * 2) << 7) & 0xff80;
if (dtt_write(sensor, DTT_TEMP_HYST, val) != 0)
return 1;
@@ -157,7 +157,7 @@ int dtt_init (void)
/* switch to correct I2C bus */
old_bus = I2C_GET_BUS();
- I2C_SET_BUS(CFG_DTT_BUS_NUM);
+ I2C_SET_BUS(CONFIG_SYS_DTT_BUS_NUM);
for (i = 0; i < sizeof(sensors); i++) {
if (_dtt_init(sensors[i]) != 0)
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 264553dfa8..281a88b972 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -26,7 +26,7 @@
#include <asm/io.h>
#include <asm/fsl_i2c.h> /* HW definitions */
-#define I2C_TIMEOUT (CFG_HZ / 4)
+#define I2C_TIMEOUT (CONFIG_SYS_HZ / 4)
#define I2C_READ_BIT 1
#define I2C_WRITE_BIT 0
@@ -38,18 +38,18 @@ DECLARE_GLOBAL_DATA_PTR;
* runs from ROM, and we can't switch buses because we can't modify
* the global variables.
*/
-#ifdef CFG_SPD_BUS_NUM
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
+#ifdef CONFIG_SYS_SPD_BUS_NUM
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CONFIG_SYS_SPD_BUS_NUM;
#else
static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
#endif
-static unsigned int i2c_bus_speed[2] = {CFG_I2C_SPEED, CFG_I2C_SPEED};
+static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
static const struct fsl_i2c *i2c_dev[2] = {
- (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET),
-#ifdef CFG_I2C2_OFFSET
- (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET)
+ (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET),
+#ifdef CONFIG_SYS_I2C2_OFFSET
+ (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET)
#endif
};
@@ -176,7 +176,7 @@ i2c_init(int speed, int slaveadd)
struct fsl_i2c *dev;
unsigned int temp;
- dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
+ dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
writeb(0, &dev->cr); /* stop I2C controller */
udelay(5); /* let it shutdown in peace */
@@ -187,8 +187,8 @@ i2c_init(int speed, int slaveadd)
writeb(0x0, &dev->sr); /* clear status register */
writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
-#ifdef CFG_I2C2_OFFSET
- dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET);
+#ifdef CONFIG_SYS_I2C2_OFFSET
+ dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET);
writeb(0, &dev->cr); /* stop I2C controller */
udelay(5); /* let it shutdown in peace */
@@ -386,7 +386,7 @@ i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
int i2c_set_bus_num(unsigned int bus)
{
-#ifdef CFG_I2C2_OFFSET
+#ifdef CONFIG_SYS_I2C2_OFFSET
if (bus > 1) {
#else
if (bus > 0) {
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 1f6ba1f390..eedad065fe 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -47,14 +47,14 @@
#define I2SR_IIF (1 << 1)
#define I2SR_RX_NO_AK (1 << 0)
-#ifdef CFG_I2C_MX31_PORT1
+#ifdef CONFIG_SYS_I2C_MX31_PORT1
#define I2C_BASE 0x43f80000
-#elif defined (CFG_I2C_MX31_PORT2)
+#elif defined (CONFIG_SYS_I2C_MX31_PORT2)
#define I2C_BASE 0x43f98000
-#elif defined (CFG_I2C_MX31_PORT3)
+#elif defined (CONFIG_SYS_I2C_MX31_PORT3)
#define I2C_BASE 0x43f84000
#else
-#error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver"
+#error "define CONFIG_SYS_I2C_MX31_PORTx to use the mx31 I2C driver"
#endif
#ifdef DEBUG
diff --git a/drivers/i2c/omap1510_i2c.c b/drivers/i2c/omap1510_i2c.c
index 388951db1f..a4e6227c5d 100644
--- a/drivers/i2c/omap1510_i2c.c
+++ b/drivers/i2c/omap1510_i2c.c
@@ -205,7 +205,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
for (i = 0; i < len; i++) {
if (i2c_read_byte (chip, addr + i, &buffer[i])) {
printf ("I2C read: I/O error\n");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
}
}
@@ -230,7 +230,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
for (i = 0; i < len; i++) {
if (i2c_write_byte (chip, addr + i, buffer[i])) {
printf ("I2C read: I/O error\n");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
}
}
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index d16cfb123f..134dccb610 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -252,7 +252,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
for (i = 0; i < len; i++) {
if (i2c_read_byte (chip, addr + i, &buffer[i])) {
printf ("I2C read: I/O error\n");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
}
}
@@ -277,7 +277,7 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
for (i = 0; i < len; i++) {
if (i2c_write_byte (chip, addr + i, buffer[i])) {
printf ("I2C read: I/O error\n");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
}
}
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 0a9feb67c7..508d3d7d78 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -75,7 +75,7 @@ static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
/*-----------------------------------------------------------------------
* Local functions
*/
-#if !defined(CFG_I2C_INIT_BOARD)
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
static void send_reset (void);
#endif
static void send_start (void);
@@ -84,7 +84,7 @@ static void send_ack (int);
static int write_byte (uchar byte);
static uchar read_byte (int);
-#if !defined(CFG_I2C_INIT_BOARD)
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
/*-----------------------------------------------------------------------
* Send a reset sequence consisting of 9 clocks with the data signal high
* to clock any confused device back into an idle state. Also send a
@@ -224,7 +224,7 @@ unsigned int i2c_get_bus_num(void)
int i2c_set_bus_num(unsigned int bus)
{
#if defined(CONFIG_I2C_MUX)
- if (bus < CFG_MAX_I2C_BUS) {
+ if (bus < CONFIG_SYS_MAX_I2C_BUS) {
i2c_bus_num = bus;
} else {
int ret;
@@ -236,7 +236,7 @@ int i2c_set_bus_num(unsigned int bus)
return ret;
}
#else
- if (bus >= CFG_MAX_I2C_BUS)
+ if (bus >= CONFIG_SYS_MAX_I2C_BUS)
return -1;
i2c_bus_num = bus;
#endif
@@ -246,12 +246,12 @@ int i2c_set_bus_num(unsigned int bus)
/* TODO: add 100/400k switching */
unsigned int i2c_get_bus_speed(void)
{
- return CFG_I2C_SPEED;
+ return CONFIG_SYS_I2C_SPEED;
}
int i2c_set_bus_speed(unsigned int speed)
{
- if (speed != CFG_I2C_SPEED)
+ if (speed != CONFIG_SYS_I2C_SPEED)
return -1;
return 0;
@@ -297,7 +297,7 @@ static uchar read_byte(int ack)
*/
void i2c_init (int speed, int slaveaddr)
{
-#if defined(CFG_I2C_INIT_BOARD)
+#if defined(CONFIG_SYS_I2C_INIT_BOARD)
/* call board specific i2c bus reset routine before accessing the */
/* environment, which might be in a chip on that bus. For details */
/* about this problem see doc/I2C_Edge_Conditions. */
@@ -342,7 +342,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
chip, addr, alen, buffer, len);
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
/*
* EEPROM chips that implement "address overflow" are ones
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -354,7 +354,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
* still be one byte because the extra address bits are
* hidden in the chip address.
*/
- chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
PRINTD("i2c_read: fix addr_overflow: chip %02X addr %02X\n",
chip, addr);
diff --git a/drivers/i2c/tsi108_i2c.c b/drivers/i2c/tsi108_i2c.c
index 695e393417..fda822c52d 100644
--- a/drivers/i2c/tsi108_i2c.c
+++ b/drivers/i2c/tsi108_i2c.c
@@ -60,14 +60,14 @@ static int i2c_read_byte (
chan_offset = TSI108_I2C_SDRAM_OFFSET;
/* Check if I2C operation is in progress */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
I2C_CNTRL2_START))) {
/* Set device address and operation (read = 0) */
temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
((chip_addr >> 3) & 0x0F);
- *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
temp;
/* Issue the read command
@@ -75,13 +75,13 @@ static int i2c_read_byte (
* (size = 1 byte, lane = 0)
*/
- *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
(I2C_CNTRL2_START);
/* Wait until operation completed */
do {
/* Read I2C operation status */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
if (0 == (temp &
@@ -90,7 +90,7 @@ static int i2c_read_byte (
) {
op_status = TSI108_I2C_SUCCESS;
- temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
chan_offset +
I2C_RD_DATA);
@@ -172,25 +172,25 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
u32 op_status = TSI108_I2C_TIMEOUT_ERR;
/* Check if I2C operation is in progress */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
/* Place data into the I2C Tx Register */
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_TX_DATA) = (u32) * buffer;
/* Set device address and operation */
temp =
I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_CNTRL1) = temp;
/* Issue the write command (at this moment all other parameters
* are 0 (size = 1 byte, lane = 0)
*/
- *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
I2C_CNTRL2) = (I2C_CNTRL2_START);
op_status = TSI108_I2C_TIMEOUT_ERR;
@@ -198,7 +198,7 @@ static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
/* Wait until operation completed */
do {
/* Read I2C operation status */
- temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+ temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
if (0 == (temp &
diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c
index d152768b8e..58094c925c 100644
--- a/drivers/input/i8042.c
+++ b/drivers/input/i8042.c
@@ -41,7 +41,7 @@ extern void gt_cpcidvi_out8(u32 offset, u8 data);
#ifdef CONFIG_CONSOLE_CURSOR
extern void console_cursor (int state);
-static int blinkCount = CFG_CONSOLE_BLINK_COUNT;
+static int blinkCount = CONFIG_SYS_CONSOLE_BLINK_COUNT;
static int cursor_state = 0;
#endif
@@ -368,7 +368,7 @@ int i8042_tstc (void)
{
cursor_state ^= 1;
console_cursor (cursor_state);
- blinkCount = CFG_CONSOLE_BLINK_COUNT;
+ blinkCount = CONFIG_SYS_CONSOLE_BLINK_COUNT;
udelay (10);
}
#endif
@@ -409,7 +409,7 @@ int i8042_getc (void)
{
cursor_state ^= 1;
console_cursor (cursor_state);
- blinkCount = CFG_CONSOLE_BLINK_COUNT;
+ blinkCount = CONFIG_SYS_CONSOLE_BLINK_COUNT;
}
udelay (10);
#endif
diff --git a/drivers/input/keyboard.c b/drivers/input/keyboard.c
index a634d76d6c..512b9f28c4 100644
--- a/drivers/input/keyboard.c
+++ b/drivers/input/keyboard.c
@@ -258,12 +258,12 @@ void handle_scancode(unsigned char scancode)
* Init
******************************************************************/
-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
extern int overwrite_console (void);
#define OVERWRITE_CONSOLE overwrite_console ()
#else
#define OVERWRITE_CONSOLE 0
-#endif /* CFG_CONSOLE_OVERWRITE_ROUTINE */
+#endif /* CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE */
int kbd_init (void)
{
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index 480ffa25a2..1af3fde647 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -18,7 +18,7 @@
#include <asm/io.h>
#include <asm/atomic.h>
#include <ps2mult.h>
-#if defined(CFG_NS16550) || defined(CONFIG_MPC85xx)
+#if defined(CONFIG_SYS_NS16550) || defined(CONFIG_MPC85xx)
#include <ns16550.h>
#endif
@@ -51,9 +51,9 @@ DECLARE_GLOBAL_DATA_PTR;
defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
#if CONFIG_PS2SERIAL == 1
-#define COM_BASE (CFG_CCSRBAR+0x4500)
+#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4500)
#elif CONFIG_PS2SERIAL == 2
-#define COM_BASE (CFG_CCSRBAR+0x4600)
+#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4600)
#else
#error CONFIG_PS2SERIAL must be in 1 ... 2
#endif
@@ -88,7 +88,7 @@ int ps2ser_init(void)
/* select clock sources */
#if defined(CONFIG_MGT5100)
psc->psc_clock_select = 0xdd00;
- baseclk = (CFG_MPC5XXX_CLKIN + 16) / 32;
+ baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
#elif defined(CONFIG_MPC5200)
psc->psc_clock_select = 0;
baseclk = (gd->ipb_clk + 16) / 32;
@@ -129,8 +129,8 @@ int ps2ser_init(void)
com_port->ier = 0x00;
com_port->lcr = LCR_BKSE | LCR_8N1;
- com_port->dll = (CFG_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
- com_port->dlm = ((CFG_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
+ com_port->dll = (CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
+ com_port->dlm = ((CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
com_port->lcr = LCR_8N1;
com_port->mcr = (MCR_DTR | MCR_RTS);
com_port->fcr = (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR);
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 2e946143bc..64df1c9889 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -46,7 +46,7 @@ DECLARE_GLOBAL_DATA_PTR;
void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
{
- volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+ volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
volatile u32 *lawbar = base + 8 * idx;
volatile u32 *lawar = base + 8 * idx + 2;
@@ -91,7 +91,7 @@ int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
void disable_law(u8 idx)
{
- volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+ volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
volatile u32 *lawbar = base + 8 * idx;
volatile u32 *lawar = base + 8 * idx + 2;
@@ -105,7 +105,7 @@ void disable_law(u8 idx)
void print_laws(void)
{
- volatile u32 *base = (volatile u32 *)(CFG_IMMR + 0xc08);
+ volatile u32 *base = (volatile u32 *)(CONFIG_SYS_IMMR + 0xc08);
volatile u32 *lawbar = base;
volatile u32 *lawar = base + 2;
int i;
diff --git a/drivers/misc/ns87308.c b/drivers/misc/ns87308.c
index 6642c2e072..9130a1ff28 100644
--- a/drivers/misc/ns87308.c
+++ b/drivers/misc/ns87308.c
@@ -27,7 +27,7 @@
void initialise_ns87308 (void)
{
-#ifdef CFG_NS87308_PS2MOD
+#ifdef CONFIG_SYS_NS87308_PS2MOD
unsigned char data;
/*
@@ -38,80 +38,80 @@ void initialise_ns87308 (void)
write_pnp_config(SUPOERIO_CONF1, data);
#endif
-#if (CFG_NS87308_DEVS & CFG_NS87308_KBC1)
- PNP_SET_DEVICE_BASE(LDEV_KBC1, CFG_NS87308_KBC1_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_KBC1)
+ PNP_SET_DEVICE_BASE(LDEV_KBC1, CONFIG_SYS_NS87308_KBC1_BASE);
write_pnp_config(LUN_CONFIG_REG, 0);
write_pnp_config(CBASE_HIGH, 0x00);
write_pnp_config(CBASE_LOW, 0x64);
#endif
-#if (CFG_NS87308_DEVS & CFG_NS87308_MOUSE)
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_MOUSE)
PNP_ACTIVATE_DEVICE(LDEV_MOUSE);
#endif
-#if (CFG_NS87308_DEVS & CFG_NS87308_RTC_APC)
- PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CFG_NS87308_RTC_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RTC_APC)
+ PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CONFIG_SYS_NS87308_RTC_BASE);
#endif
-#if (CFG_NS87308_DEVS & CFG_NS87308_FDC)
- PNP_SET_DEVICE_BASE(LDEV_FDC, CFG_NS87308_FDC_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_FDC)
+ PNP_SET_DEVICE_BASE(LDEV_FDC, CONFIG_SYS_NS87308_FDC_BASE);
write_pnp_config(LUN_CONFIG_REG, 0x40);
#endif
-#if (CFG_NS87308_DEVS & CFG_NS87308_RARP)
- PNP_SET_DEVICE_BASE(LDEV_PARP, CFG_NS87308_LPT_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RARP)
+ PNP_SET_DEVICE_BASE(LDEV_PARP, CONFIG_SYS_NS87308_LPT_BASE);
#endif
-#if (CFG_NS87308_DEVS & CFG_NS87308_UART1)
- PNP_SET_DEVICE_BASE(LDEV_UART1, CFG_NS87308_UART1_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART1)
+ PNP_SET_DEVICE_BASE(LDEV_UART1, CONFIG_SYS_NS87308_UART1_BASE);
#endif
-#if (CFG_NS87308_DEVS & CFG_NS87308_UART2)
- PNP_SET_DEVICE_BASE(LDEV_UART2, CFG_NS87308_UART2_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART2)
+ PNP_SET_DEVICE_BASE(LDEV_UART2, CONFIG_SYS_NS87308_UART2_BASE);
#endif
-#if (CFG_NS87308_DEVS & CFG_NS87308_GPIO)
- PNP_SET_DEVICE_BASE(LDEV_GPIO, CFG_NS87308_GPIO_BASE);
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_GPIO)
+ PNP_SET_DEVICE_BASE(LDEV_GPIO, CONFIG_SYS_NS87308_GPIO_BASE);
#endif
-#if (CFG_NS87308_DEVS & CFG_NS87308_POWRMAN)
-#ifndef CFG_NS87308_PWMAN_BASE
+#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_POWRMAN)
+#ifndef CONFIG_SYS_NS87308_PWMAN_BASE
PNP_ACTIVATE_DEVICE(LDEV_POWRMAN);
#else
- PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CFG_NS87308_PWMAN_BASE);
+ PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CONFIG_SYS_NS87308_PWMAN_BASE);
/*
* Enable all units
*/
- write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
- write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
+ write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
+ write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
-#ifdef CFG_NS87308_PMC1
- write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC1, CFG_NS87308_PMC1);
+#ifdef CONFIG_SYS_NS87308_PMC1
+ write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC1, CONFIG_SYS_NS87308_PMC1);
#endif
-#ifdef CFG_NS87308_PMC2
- write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC2, CFG_NS87308_PMC2);
+#ifdef CONFIG_SYS_NS87308_PMC2
+ write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC2, CONFIG_SYS_NS87308_PMC2);
#endif
-#ifdef CFG_NS87308_PMC3
- write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC3, CFG_NS87308_PMC3);
+#ifdef CONFIG_SYS_NS87308_PMC3
+ write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC3, CONFIG_SYS_NS87308_PMC3);
#endif
#endif
#endif
-#ifdef CFG_NS87308_CS0_BASE
- PNP_PGCS_CSLINE_BASE(0, CFG_NS87308_CS0_BASE);
- PNP_PGCS_CSLINE_CONF(0, CFG_NS87308_CS0_CONF);
+#ifdef CONFIG_SYS_NS87308_CS0_BASE
+ PNP_PGCS_CSLINE_BASE(0, CONFIG_SYS_NS87308_CS0_BASE);
+ PNP_PGCS_CSLINE_CONF(0, CONFIG_SYS_NS87308_CS0_CONF);
#endif
-#ifdef CFG_NS87308_CS1_BASE
- PNP_PGCS_CSLINE_BASE(1, CFG_NS87308_CS1_BASE);
- PNP_PGCS_CSLINE_CONF(1, CFG_NS87308_CS1_CONF);
+#ifdef CONFIG_SYS_NS87308_CS1_BASE
+ PNP_PGCS_CSLINE_BASE(1, CONFIG_SYS_NS87308_CS1_BASE);
+ PNP_PGCS_CSLINE_CONF(1, CONFIG_SYS_NS87308_CS1_CONF);
#endif
-#ifdef CFG_NS87308_CS2_BASE
- PNP_PGCS_CSLINE_BASE(2, CFG_NS87308_CS2_BASE);
- PNP_PGCS_CSLINE_CONF(2, CFG_NS87308_CS2_CONF);
+#ifdef CONFIG_SYS_NS87308_CS2_BASE
+ PNP_PGCS_CSLINE_BASE(2, CONFIG_SYS_NS87308_CS2_BASE);
+ PNP_PGCS_CSLINE_CONF(2, CONFIG_SYS_NS87308_CS2_CONF);
#endif
}
diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c
index a151488d12..3aa92f26e1 100644
--- a/drivers/mmc/atmel_mci.c
+++ b/drivers/mmc/atmel_mci.c
@@ -38,16 +38,16 @@
#define pr_debug(...) do { } while(0)
#endif
-#ifndef CFG_MMC_CLK_OD
-#define CFG_MMC_CLK_OD 150000
+#ifndef CONFIG_SYS_MMC_CLK_OD
+#define CONFIG_SYS_MMC_CLK_OD 150000
#endif
-#ifndef CFG_MMC_CLK_PP
-#define CFG_MMC_CLK_PP 5000000
+#ifndef CONFIG_SYS_MMC_CLK_PP
+#define CONFIG_SYS_MMC_CLK_PP 5000000
#endif
-#ifndef CFG_MMC_OP_COND
-#define CFG_MMC_OP_COND 0x00100000
+#ifndef CONFIG_SYS_MMC_OP_COND
+#define CONFIG_SYS_MMC_OP_COND 0x00100000
#endif
#define MMC_DEFAULT_BLKLEN 512
@@ -349,7 +349,7 @@ static int sd_init_card(struct mmc_cid *cid, int verbose)
mmc_idle_cards();
for (i = 0; i < 1000; i++) {
- ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CFG_MMC_OP_COND,
+ ret = mmc_acmd(SD_CMD_APP_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND,
resp, R3 | NID);
if (ret || (resp[0] & 0x80000000))
break;
@@ -385,7 +385,7 @@ static int mmc_init_card(struct mmc_cid *cid, int verbose)
mmc_idle_cards();
for (i = 0; i < 1000; i++) {
- ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CFG_MMC_OP_COND, resp,
+ ret = mmc_cmd(MMC_CMD_SEND_OP_COND, CONFIG_SYS_MMC_OP_COND, resp,
R3 | NID | OPEN_DRAIN);
if (ret || (resp[0] & 0x80000000))
break;
@@ -434,7 +434,7 @@ static void mci_set_data_timeout(struct mmc_csd *csd)
timeout_clks = csd->nsac * 100;
timeout_clks += (((timeout_ns + 9) / 10)
- * ((CFG_MMC_CLK_PP + 99999) / 100000) + 9999) / 10000;
+ * ((CONFIG_SYS_MMC_CLK_PP + 99999) / 100000) + 9999) / 10000;
if (!mmc_card_is_sd)
timeout_clks *= 10;
else
@@ -475,7 +475,7 @@ int mmc_init(int verbose)
mmci_writel(CR, MMCI_BIT(MCIEN));
mmci_writel(DTOR, 0x5f);
mmci_writel(IDR, ~0UL);
- mci_set_mode(CFG_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
+ mci_set_mode(CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN);
mmc_card_is_sd = 0;
@@ -520,7 +520,7 @@ int mmc_init(int verbose)
mmc_blkdev.blksz = 512;
mmc_blkdev.lba = (csd.c_size + 1) * (1 << (csd.c_size_mult + 2));
- mci_set_mode(CFG_MMC_CLK_PP, mmc_blkdev.blksz);
+ mci_set_mode(CONFIG_SYS_MMC_CLK_PP, mmc_blkdev.blksz);
#if 0
if (fat_register_device(&mmc_blkdev, 1))
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 7bfdc43da1..c40bf66105 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -57,12 +57,12 @@
* AMD/Spansion Application Note: Migration from Single-byte to Three-byte
* Device IDs, Publication Number 25538 Revision A, November 8, 2001
*
- * Define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
+ * Define CONFIG_SYS_WRITE_SWAPPED_DATA, if you have to swap the Bytes between
* reading and writing ... (yes there is such a Hardware).
*/
-#ifndef CFG_FLASH_BANKS_LIST
-#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#ifndef CONFIG_SYS_FLASH_BANKS_LIST
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#endif
#define FLASH_CMD_CFI 0x98
@@ -143,7 +143,7 @@
#define CFI_CMDSET_SST 258
#define CFI_CMDSET_INTEL_PROG_REGIONS 512
-#ifdef CFG_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
+#ifdef CONFIG_SYS_FLASH_CFI_AMD_RESET /* needed for STM_ID_29W320DB on UC100 */
# undef FLASH_CMD_RESET
# define FLASH_CMD_RESET AMD_CMD_RESET /* use AMD-Reset instead */
#endif
@@ -159,11 +159,11 @@ typedef union {
static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
-/* use CFG_MAX_FLASH_BANKS_DETECT if defined */
-#ifdef CFG_MAX_FLASH_BANKS_DETECT
-# define CFI_MAX_FLASH_BANKS CFG_MAX_FLASH_BANKS_DETECT
+/* use CONFIG_SYS_MAX_FLASH_BANKS_DETECT if defined */
+#ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
+# define CFI_MAX_FLASH_BANKS CONFIG_SYS_MAX_FLASH_BANKS_DETECT
#else
-# define CFI_MAX_FLASH_BANKS CFG_MAX_FLASH_BANKS
+# define CFI_MAX_FLASH_BANKS CONFIG_SYS_MAX_FLASH_BANKS
#endif
flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */
@@ -171,8 +171,8 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */
/*
* Check if chip width is defined. If not, start detecting with 8bit.
*/
-#ifndef CFG_FLASH_CFI_WIDTH
-#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#ifndef CONFIG_SYS_FLASH_CFI_WIDTH
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
#endif
typedef unsigned long flash_sect_t;
@@ -255,20 +255,20 @@ u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64")));
/*-----------------------------------------------------------------------
*/
-#if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+#if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
static flash_info_t *flash_get_info(ulong base)
{
int i;
flash_info_t * info = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
info = & flash_info[i];
if (info->size && info->start[0] <= base &&
base <= info->start[0] + info->size - 1)
break;
}
- return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+ return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
}
#endif
@@ -309,7 +309,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
int i;
int cword_offset;
int cp_offset;
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
u32 cmd_le = cpu_to_le32(cmd);
#endif
uchar val;
@@ -317,7 +317,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
for (i = info->portwidth; i > 0; i--){
cword_offset = (info->portwidth-i)%info->chipwidth;
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
cp_offset = info->portwidth - i;
val = *((uchar*)&cmd_le + cword_offset);
#else
@@ -374,7 +374,7 @@ static inline uchar flash_read_uchar (flash_info_t * info, uint offset)
uchar retval;
cp = flash_map (info, 0, offset);
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
retval = flash_read8(cp);
#else
retval = flash_read8(cp + info->portwidth - 1);
@@ -419,7 +419,7 @@ static ulong flash_read_long (flash_info_t * info, flash_sect_t sect,
debug ("addr[%x] = 0x%x\n", x, flash_read8(addr + x));
}
#endif
-#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
retval = ((flash_read8(addr) << 16) |
(flash_read8(addr + info->portwidth) << 24) |
(flash_read8(addr + 2 * info->portwidth)) |
@@ -646,8 +646,8 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector,
{
ulong start;
-#if CFG_HZ != 1000
- tout *= CFG_HZ/1000;
+#if CONFIG_SYS_HZ != 1000
+ tout *= CONFIG_SYS_HZ/1000;
#endif
/* Wait for command completion */
@@ -716,7 +716,7 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
*/
static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
{
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
unsigned short w;
unsigned int l;
unsigned long long ll;
@@ -727,7 +727,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
cword->c = c;
break;
case FLASH_CFI_16BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
w = c;
w <<= 8;
cword->w = (cword->w >> 8) | w;
@@ -736,7 +736,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
#endif
break;
case FLASH_CFI_32BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
l = c;
l <<= 24;
cword->l = (cword->l >> 8) | l;
@@ -745,7 +745,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c)
#endif
break;
case FLASH_CFI_64BIT:
-#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA)
+#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA)
ll = c;
ll <<= 56;
cword->ll = (cword->ll >> 8) | ll;
@@ -850,7 +850,7 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
info->write_tout, "write");
}
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp,
int len)
@@ -1024,7 +1024,7 @@ out_unmap:
unmap_physmem(dst, len);
return retcode;
}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
/*-----------------------------------------------------------------------
@@ -1173,7 +1173,7 @@ void flash_print_info (flash_info_t * info)
for (i = 0; i < info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n");
-#ifdef CFG_FLASH_EMPTY_INFO
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
int k;
int size;
int erased;
@@ -1198,7 +1198,7 @@ void flash_print_info (flash_info_t * info)
info->start[i],
erased ? 'E' : ' ',
info->protect[i] ? "RO" : " ");
-#else /* ! CFG_FLASH_EMPTY_INFO */
+#else /* ! CONFIG_SYS_FLASH_EMPTY_INFO */
printf (" %08lX %s ",
info->start[i],
info->protect[i] ? "RO" : " ");
@@ -1242,7 +1242,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
int aln;
cfiword_t cword;
int i, rc;
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
int buffered_size;
#endif
#ifdef CONFIG_FLASH_SHOW_PROGRESS
@@ -1286,7 +1286,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
}
/* handle the aligned part */
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
buffered_size = (info->portwidth / info->chipwidth);
buffered_size *= info->buffer_size;
while (cnt >= info->portwidth) {
@@ -1326,7 +1326,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
cnt -= info->portwidth;
FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth);
}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
if (cnt == 0) {
return (0);
@@ -1350,7 +1350,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
/*-----------------------------------------------------------------------
*/
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
int flash_real_protect (flash_info_t * info, long sector, int prot)
{
@@ -1457,7 +1457,7 @@ void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset,
flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src);
}
-#endif /* CFG_FLASH_PROTECTION */
+#endif /* CONFIG_SYS_FLASH_PROTECTION */
/*-----------------------------------------------------------------------
* Reverse the order of the erase regions in the CFI QRY structure.
@@ -1501,7 +1501,7 @@ static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
cmdset_intel_read_jedec_ids(info);
flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
/* read legacy lock/unlock bit from intel flash */
if (info->ext_addr) {
info->legacy_unlock = flash_read_uchar (info,
@@ -1717,7 +1717,7 @@ static int flash_detect_cfi (flash_info_t * info, struct cfi_qry *qry)
{
debug ("flash detect cfi\n");
- for (info->portwidth = CFG_FLASH_CFI_WIDTH;
+ for (info->portwidth = CONFIG_SYS_FLASH_CFI_WIDTH;
info->portwidth <= FLASH_CFI_64BIT; info->portwidth <<= 1) {
for (info->chipwidth = FLASH_CFI_BY8;
info->chipwidth <= info->portwidth;
@@ -1793,7 +1793,7 @@ ulong flash_get_size (ulong base, int banknum)
info->ext_addr = 0;
info->cfi_version = 0;
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
info->legacy_unlock = 0;
#endif
@@ -1882,7 +1882,7 @@ ulong flash_get_size (ulong base, int banknum)
debug ("erase_region_count = %d erase_region_size = %d\n",
erase_region_count, erase_region_size);
for (j = 0; j < erase_region_count; j++) {
- if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+ if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
printf("ERROR: too many flash sectors\n");
break;
}
@@ -1947,41 +1947,41 @@ unsigned long flash_init (void)
{
unsigned long size = 0;
int i;
-#if defined(CFG_FLASH_AUTOPROTECT_LIST)
+#if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST)
struct apl_s {
ulong start;
ulong size;
- } apl[] = CFG_FLASH_AUTOPROTECT_LIST;
+ } apl[] = CONFIG_SYS_FLASH_AUTOPROTECT_LIST;
#endif
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
char *s = getenv("unlock");
#endif
-#define BANK_BASE(i) (((unsigned long [CFI_MAX_FLASH_BANKS])CFG_FLASH_BANKS_LIST)[i])
+#define BANK_BASE(i) (((unsigned long [CFI_MAX_FLASH_BANKS])CONFIG_SYS_FLASH_BANKS_LIST)[i])
/* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
if (!flash_detect_legacy (BANK_BASE(i), i))
flash_get_size (BANK_BASE(i), i);
size += flash_info[i].size;
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-#ifndef CFG_FLASH_QUIET_TEST
+#ifndef CONFIG_SYS_FLASH_QUIET_TEST
printf ("## Unknown FLASH on Bank %d "
"- Size = 0x%08lx = %ld MB\n",
i+1, flash_info[i].size,
flash_info[i].size << 20);
-#endif /* CFG_FLASH_QUIET_TEST */
+#endif /* CONFIG_SYS_FLASH_QUIET_TEST */
}
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
else if ((s != NULL) && (strcmp(s, "yes") == 0)) {
/*
* Only the U-Boot image and it's environment
* is protected, all other sectors are
* unprotected (unlocked) if flash hardware
- * protection is used (CFG_FLASH_PROTECTION)
+ * protection is used (CONFIG_SYS_FLASH_PROTECTION)
* and the environment variable "unlock" is
* set to "yes".
*/
@@ -2022,15 +2022,15 @@ unsigned long flash_init (void)
&flash_info[i]);
}
}
-#endif /* CFG_FLASH_PROTECTION */
+#endif /* CONFIG_SYS_FLASH_PROTECTION */
}
/* Monitor protection ON by default */
-#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
flash_protect (FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
- flash_get_info(CFG_MONITOR_BASE));
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+ flash_get_info(CONFIG_SYS_MONITOR_BASE));
#endif
/* Environment protection ON by default */
@@ -2049,7 +2049,7 @@ unsigned long flash_init (void)
flash_get_info(CONFIG_ENV_ADDR_REDUND));
#endif
-#if defined(CFG_FLASH_AUTOPROTECT_LIST)
+#if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST)
for (i = 0; i < (sizeof(apl) / sizeof(struct apl_s)); i++) {
debug("autoprotecting from %08x to %08x\n",
apl[i].start, apl[i].start + apl[i].size - 1);
diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c
index 049da69fec..201e5180bd 100644
--- a/drivers/mtd/dataflash.c
+++ b/drivers/mtd/dataflash.c
@@ -40,12 +40,12 @@ int AT91F_DataflashInit (void)
int dfcode;
int part;
int last_part;
- int found[CFG_MAX_DATAFLASH_BANKS];
+ int found[CONFIG_SYS_MAX_DATAFLASH_BANKS];
unsigned char protected;
AT91F_SpiInit ();
- for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
found[i] = 0;
dataflash_info[i].Desc.state = IDLE;
dataflash_info[i].id = 0;
@@ -179,7 +179,7 @@ void AT91F_DataflashSetEnv (void)
unsigned char s[32]; /* Will fit a long int in hex */
unsigned long start;
- for (i = 0, part= 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+ for (i = 0, part= 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
for(j = 0; j<NB_DATAFLASH_AREA; j++) {
env = area_list[part].setenv;
/* Set the environment according to the label...*/
@@ -198,7 +198,7 @@ void dataflash_print_info (void)
{
int i, j;
- for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
if (dataflash_info[i].id != 0) {
printf("DataFlash:");
switch (dataflash_info[i].id) {
@@ -258,7 +258,7 @@ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash,
char addr_valid = 0;
int i;
- for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++)
+ for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++)
if ( dataflash_info[i].id
&& ((((int) *addr) & 0xFF000000) ==
dataflash_info[i].logical_address)) {
@@ -284,7 +284,7 @@ int addr_dataflash (unsigned long addr)
int addr_valid = 0;
int i;
- for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
if ((((int) addr) & 0xFF000000) ==
dataflash_info[i].logical_address) {
addr_valid = 1;
@@ -349,7 +349,7 @@ int dataflash_real_protect (int flag, unsigned long start_addr,
int i,j, area1, area2, addr_valid = 0;
/* find dataflash */
- for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) {
if ((((int) start_addr) & 0xF0000000) ==
dataflash_info[i].logical_address) {
addr_valid = 1;
diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c
index 020647a7ca..226e1e418f 100644
--- a/drivers/mtd/jedec_flash.c
+++ b/drivers/mtd/jedec_flash.c
@@ -170,7 +170,7 @@ struct amd_flash_info {
#define SIZE_8MiB 23
static const struct amd_flash_info jedec_table[] = {
-#ifdef CFG_FLASH_LEGACY_256Kx8
+#ifdef CONFIG_SYS_FLASH_LEGACY_256Kx8
{
.mfr_id = MANUFACTURER_SST,
.dev_id = SST39LF020,
@@ -186,7 +186,7 @@ static const struct amd_flash_info jedec_table[] = {
}
},
#endif
-#ifdef CFG_FLASH_LEGACY_512Kx8
+#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx8
{
.mfr_id = MANUFACTURER_AMD,
.dev_id = AM29LV040B,
@@ -216,7 +216,7 @@ static const struct amd_flash_info jedec_table[] = {
}
},
#endif
-#ifdef CFG_FLASH_LEGACY_512Kx16
+#ifdef CONFIG_SYS_FLASH_LEGACY_512Kx16
{
.mfr_id = MANUFACTURER_AMD,
.dev_id = AM29LV400BB,
@@ -307,7 +307,7 @@ static inline void fill_info(flash_info_t *info, const struct amd_flash_info *je
debug ("erase_region_count = %d erase_region_size = %d\n",
erase_region_count, erase_region_size);
for (j = 0; j < erase_region_count; j++) {
- if (sect_cnt >= CFG_MAX_FLASH_SECT) {
+ if (sect_cnt >= CONFIG_SYS_MAX_FLASH_SECT) {
printf("ERROR: too many flash sectors\n");
break;
}
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 4351824388..7dda6c4e57 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -693,7 +693,7 @@ static struct fsl_elbc_ctrl *elbc_ctrl;
static void fsl_elbc_ctrl_init(void)
{
- immap_t *im = (immap_t *)CFG_IMMR;
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
elbc_ctrl = kzalloc(sizeof(*elbc_ctrl), GFP_KERNEL);
if (!elbc_ctrl)
diff --git a/drivers/mtd/nand/nand.c b/drivers/mtd/nand/nand.c
index 71a0e4bbb1..eeb19ff1b9 100644
--- a/drivers/mtd/nand/nand.c
+++ b/drivers/mtd/nand/nand.c
@@ -24,15 +24,15 @@
#include <common.h>
#include <nand.h>
-#ifndef CFG_NAND_BASE_LIST
-#define CFG_NAND_BASE_LIST { CFG_NAND_BASE }
+#ifndef CONFIG_SYS_NAND_BASE_LIST
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
#endif
int nand_curr_device = -1;
-nand_info_t nand_info[CFG_MAX_NAND_DEVICE];
+nand_info_t nand_info[CONFIG_SYS_MAX_NAND_DEVICE];
-static struct nand_chip nand_chip[CFG_MAX_NAND_DEVICE];
-static ulong base_address[CFG_MAX_NAND_DEVICE] = CFG_NAND_BASE_LIST;
+static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
+static ulong base_address[CONFIG_SYS_MAX_NAND_DEVICE] = CONFIG_SYS_NAND_BASE_LIST;
static const char default_nand_name[] = "nand";
@@ -61,7 +61,7 @@ void nand_init(void)
{
int i;
unsigned int size = 0;
- for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
nand_init_chip(&nand_info[i], &nand_chip[i], base_address[i]);
size += nand_info[i].size / 1024;
if (nand_curr_device == -1)
@@ -69,7 +69,7 @@ void nand_init(void)
}
printf("%u MiB\n", size / 1024);
-#ifdef CFG_NAND_SELECT_DEVICE
+#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
/*
* Select the chip in the board/cpu specific driver
*/
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 0913bb8741..fe34a4864b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -492,7 +492,7 @@ EXPORT_SYMBOL_GPL(nand_wait_ready);
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
- u32 timeo = (CFG_HZ * 20) / 1000;
+ u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
reset_timer();
@@ -831,9 +831,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
int state = this->state;
if (state == FL_ERASING)
- timeo = (CFG_HZ * 400) / 1000;
+ timeo = (CONFIG_SYS_HZ * 400) / 1000;
else
- timeo = (CFG_HZ * 20) / 1000;
+ timeo = (CONFIG_SYS_HZ * 20) / 1000;
if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
this->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c
index 159fe76aa5..edaf55a14e 100644
--- a/drivers/mtd/nand/s3c64xx.c
+++ b/drivers/mtd/nand/s3c64xx.c
@@ -141,7 +141,7 @@ static int s3c_nand_device_ready(struct mtd_info *mtdinfo)
return !!(readl(NFSTAT) & NFSTAT_RnB);
}
-#ifdef CFG_S3C_NAND_HWECC
+#ifdef CONFIG_SYS_S3C_NAND_HWECC
/*
* This function is called before encoding ecc codes to ready ecc engine.
* Written by jsgood
@@ -256,7 +256,7 @@ static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat,
return ret;
}
-#endif /* CFG_S3C_NAND_HWECC */
+#endif /* CONFIG_SYS_S3C_NAND_HWECC */
/*
* Board-specific NAND initialization. The following members of the
@@ -297,7 +297,7 @@ int board_nand_init(struct nand_chip *nand)
nand->read_buf = nand_read_buf;
#endif
-#ifdef CFG_S3C_NAND_HWECC
+#ifdef CONFIG_SYS_S3C_NAND_HWECC
nand->ecc.hwctl = s3c_nand_enable_hwecc;
nand->ecc.calculate = s3c_nand_calculate_ecc;
nand->ecc.correct = s3c_nand_correct_data;
@@ -307,11 +307,11 @@ int board_nand_init(struct nand_chip *nand)
* board one day, it will get more complicated...
*/
nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.size = CFG_NAND_ECCSIZE;
- nand->ecc.bytes = CFG_NAND_ECCBYTES;
+ nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
+ nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
#else
nand->ecc.mode = NAND_ECC_SOFT;
-#endif /* ! CFG_S3C_NAND_HWECC */
+#endif /* ! CONFIG_SYS_S3C_NAND_HWECC */
nand->priv = nand_cs + chip_n++;
diff --git a/drivers/mtd/nand_legacy/nand_legacy.c b/drivers/mtd/nand_legacy/nand_legacy.c
index bf5565a8fb..407e901a37 100644
--- a/drivers/mtd/nand_legacy/nand_legacy.c
+++ b/drivers/mtd/nand_legacy/nand_legacy.c
@@ -66,7 +66,7 @@ struct nand_oob_config {
int eccvalid_pos;
} oob_config = { {0}, 0, 0};
-struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE] = {{0}};
+struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE] = {{0}};
int curr_device = -1; /* Current NAND Device */
@@ -982,7 +982,7 @@ static int nand_write_ecc (struct nand_chip* nand, size_t to, size_t len,
#ifdef CONFIG_OMAP1510
archflashwp(0,0);
#endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
NAND_WP_OFF();
#endif
@@ -1036,7 +1036,7 @@ out:
#ifdef CONFIG_OMAP1510
archflashwp(0,1);
#endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
NAND_WP_ON();
#endif
@@ -1235,7 +1235,7 @@ int nand_legacy_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean)
#ifdef CONFIG_OMAP1510
archflashwp(0,0);
#endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
NAND_WP_OFF();
#endif
NAND_ENABLE_CE(nand); /* set pin low */
@@ -1321,7 +1321,7 @@ out:
#ifdef CONFIG_OMAP1510
archflashwp(0,1);
#endif
-#ifdef CFG_NAND_WP
+#ifdef CONFIG_SYS_NAND_WP
NAND_WP_ON();
#endif
@@ -1358,7 +1358,7 @@ unsigned long nand_probe(unsigned long physadr)
#endif
oob_config.badblock_pos = 5;
- for (i=0; i<CFG_MAX_NAND_DEVICE; i++) {
+ for (i=0; i<CONFIG_SYS_MAX_NAND_DEVICE; i++) {
if (nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN) {
nand = &nand_dev_desc[i];
break;
diff --git a/drivers/mtd/onenand/onenand_uboot.c b/drivers/mtd/onenand/onenand_uboot.c
index d614450616..08082f3ede 100644
--- a/drivers/mtd/onenand/onenand_uboot.c
+++ b/drivers/mtd/onenand/onenand_uboot.c
@@ -26,7 +26,7 @@ void onenand_init(void)
memset(&onenand_mtd, 0, sizeof(struct mtd_info));
memset(&onenand_chip, 0, sizeof(struct onenand_chip));
- onenand_chip.base = (void *) CFG_ONENAND_BASE;
+ onenand_chip.base = (void *) CONFIG_SYS_ONENAND_BASE;
onenand_mtd.priv = &onenand_chip;
onenand_scan(&onenand_mtd, 1);
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index e5f758e109..75f5900dc1 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -5,9 +5,9 @@
*/
/* Common parameters */
-#define SPI_FLASH_PROG_TIMEOUT ((10 * CFG_HZ) / 1000)
-#define SPI_FLASH_PAGE_ERASE_TIMEOUT ((50 * CFG_HZ) / 1000)
-#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CFG_HZ)
+#define SPI_FLASH_PROG_TIMEOUT ((10 * CONFIG_SYS_HZ) / 1000)
+#define SPI_FLASH_PAGE_ERASE_TIMEOUT ((50 * CONFIG_SYS_HZ) / 1000)
+#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
/* Common commands */
#define CMD_READ_ID 0x9f
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
index c999b125e3..b8b835a3ff 100644
--- a/drivers/mtd/spi/stmicro.c
+++ b/drivers/mtd/spi/stmicro.c
@@ -295,7 +295,7 @@ int stmicro_erase(struct spi_flash *flash, u32 offset, size_t len)
}
/* Up to 2 seconds */
- ret = stmicro_wait_ready(flash, 2 * CFG_HZ);
+ ret = stmicro_wait_ready(flash, 2 * CONFIG_SYS_HZ);
if (ret < 0) {
debug("SF: STMicro page erase timed out\n");
break;
diff --git a/drivers/net/bcm570x.c b/drivers/net/bcm570x.c
index 6b28b95ebc..185764ef5e 100644
--- a/drivers/net/bcm570x.c
+++ b/drivers/net/bcm570x.c
@@ -439,9 +439,9 @@ int eth_init (bd_t * bis)
/* Setup timer delays */
if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
pDevice->UseTaggedStatus = TRUE;
- pUmDevice->timer_interval = CFG_HZ;
+ pUmDevice->timer_interval = CONFIG_SYS_HZ;
} else {
- pUmDevice->timer_interval = CFG_HZ / 50;
+ pUmDevice->timer_interval = CONFIG_SYS_HZ / 50;
}
/* Grab name .... */
@@ -458,15 +458,15 @@ int eth_init (bd_t * bis)
pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0;
/* delay for 4 seconds */
- pUmDevice->delayed_link_ind = (4 * CFG_HZ) / pUmDevice->timer_interval;
+ pUmDevice->delayed_link_ind = (4 * CONFIG_SYS_HZ) / pUmDevice->timer_interval;
- pUmDevice->adaptive_expiry = CFG_HZ / pUmDevice->timer_interval;
+ pUmDevice->adaptive_expiry = CONFIG_SYS_HZ / pUmDevice->timer_interval;
/* Sometimes we get spurious ints. after reset when link is down. */
/* This field tells the isr to service the int. even if there is */
/* no status block update. */
pUmDevice->adapter_just_inited =
- (3 * CFG_HZ) / pUmDevice->timer_interval;
+ (3 * CONFIG_SYS_HZ) / pUmDevice->timer_interval;
/* Initialize 570x */
if (LM_InitializeAdapter (pDevice) != LM_STATUS_SUCCESS) {
@@ -1046,9 +1046,9 @@ LM_STATUS MM_GetConfig (PLM_DEVICE_BLOCK pDevice)
if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
pDevice->UseTaggedStatus = TRUE;
- pUmDevice->timer_interval = CFG_HZ;
+ pUmDevice->timer_interval = CONFIG_SYS_HZ;
} else {
- pUmDevice->timer_interval = CFG_HZ / 50;
+ pUmDevice->timer_interval = CONFIG_SYS_HZ / 50;
}
pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index];
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c5e74b8b5d..504fd100a4 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -466,7 +466,7 @@ ADI_ETHER_BUFFER *SetupTxBuffer(int no)
return buf;
}
-#if defined(CONFIG_POST) && defined(CFG_POST_ETHER)
+#if defined(CONFIG_POST) && defined(CONFIG_SYS_POST_ETHER)
int ether_post_test(int flags)
{
uchar buf[64];
diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
index ae1983ac0b..35a9bafaa3 100644
--- a/drivers/net/cs8900.c
+++ b/drivers/net/cs8900.c
@@ -90,7 +90,7 @@ static void eth_reset (void)
udelay (200000);
/* Wait until the chip is reset */
- tmo = get_timer (0) + 1 * CFG_HZ;
+ tmo = get_timer (0) + 1 * CONFIG_SYS_HZ;
while ((((us = get_reg_init_bus (PP_SelfSTAT)) & PP_SelfSTAT_InitD) == 0)
&& tmo < get_timer (0))
/*NOP*/;
@@ -244,7 +244,7 @@ retry:
#ifdef DEBUG
printf ("cs: unable to send packet; retrying...\n");
#endif
- for (tmo = get_timer (0) + 5 * CFG_HZ; get_timer (0) < tmo;)
+ for (tmo = get_timer (0) + 5 * CONFIG_SYS_HZ; get_timer (0) < tmo;)
/*NOP*/;
eth_reset ();
eth_reginit ();
@@ -257,7 +257,7 @@ retry:
CS8900_RTDATA = *addr++;
/* wait for transfer to succeed */
- tmo = get_timer (0) + 5 * CFG_HZ;
+ tmo = get_timer (0) + 5 * CONFIG_SYS_HZ;
while ((s = get_reg (PP_TER) & ~0x1F) == 0) {
if (get_timer (0) >= tmo)
break;
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 3a61b802e6..ffb739de9f 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -447,7 +447,7 @@ eth_send(volatile void *packet, int length)
DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
/* wait for end of transmission */
- tmo = get_timer(0) + 5 * CFG_HZ;
+ tmo = get_timer(0) + 5 * CONFIG_SYS_HZ;
while ( !(DM9000_ior(DM9000_NSR) & (NSR_TX1END | NSR_TX2END)) ||
!(DM9000_ior(DM9000_ISR) & IMR_PTM) ) {
if (get_timer(0) >= tmo) {
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index d6539c01aa..9c06b25569 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -194,14 +194,14 @@ struct descriptor { /* A generic descriptor. */
unsigned char params[0];
};
-#define CFG_CMD_EL 0x8000
-#define CFG_CMD_SUSPEND 0x4000
-#define CFG_CMD_INT 0x2000
-#define CFG_CMD_IAS 0x0001 /* individual address setup */
-#define CFG_CMD_CONFIGURE 0x0002 /* configure */
+#define CONFIG_SYS_CMD_EL 0x8000
+#define CONFIG_SYS_CMD_SUSPEND 0x4000
+#define CONFIG_SYS_CMD_INT 0x2000
+#define CONFIG_SYS_CMD_IAS 0x0001 /* individual address setup */
+#define CONFIG_SYS_CMD_CONFIGURE 0x0002 /* configure */
-#define CFG_STATUS_C 0x8000
-#define CFG_STATUS_OK 0x2000
+#define CONFIG_SYS_STATUS_C 0x8000
+#define CONFIG_SYS_STATUS_OK 0x2000
/* Misc.
*/
@@ -529,7 +529,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
tx_next = ((tx_next + 1) % NUM_TX_DESC);
cfg_cmd = (struct descriptor *) &tx_ring[tx_cur];
- cfg_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_CONFIGURE));
+ cfg_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_CONFIGURE));
cfg_cmd->status = 0;
cfg_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
@@ -537,7 +537,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
sizeof (i82558_config_cmd));
if (!wait_for_eepro100 (dev)) {
- printf ("Error---CFG_CMD_CONFIGURE: Can not reset ethernet controller.\n");
+ printf ("Error---CONFIG_SYS_CMD_CONFIGURE: Can not reset ethernet controller.\n");
goto Done;
}
@@ -545,7 +545,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
OUTW (dev, SCB_M | CU_START, SCBCmd);
for (i = 0;
- !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+ !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
i++) {
if (i >= TOUT_LOOP) {
printf ("%s: Tx error buffer not ready\n", dev->name);
@@ -553,7 +553,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
}
}
- if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+ if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
printf ("TX error status = 0x%08X\n",
le16_to_cpu (tx_ring[tx_cur].status));
goto Done;
@@ -565,7 +565,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
tx_next = ((tx_next + 1) % NUM_TX_DESC);
ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
- ias_cmd->command = cpu_to_le16 ((CFG_CMD_SUSPEND | CFG_CMD_IAS));
+ ias_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_IAS));
ias_cmd->status = 0;
ias_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
@@ -581,7 +581,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
OUTW (dev, SCB_M | CU_START, SCBCmd);
- for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+ for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
i++) {
if (i >= TOUT_LOOP) {
printf ("%s: Tx error buffer not ready\n",
@@ -590,7 +590,7 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
}
}
- if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+ if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
printf ("TX error status = 0x%08X\n",
le16_to_cpu (tx_ring[tx_cur].status));
goto Done;
@@ -640,7 +640,7 @@ static int eepro100_send (struct eth_device *dev, volatile void *packet, int len
OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
OUTW (dev, SCB_M | CU_START, SCBCmd);
- for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_C);
+ for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
i++) {
if (i >= TOUT_LOOP) {
printf ("%s: Tx error buffer not ready\n", dev->name);
@@ -648,7 +648,7 @@ static int eepro100_send (struct eth_device *dev, volatile void *packet, int len
}
}
- if (!(le16_to_cpu (tx_ring[tx_cur].status) & CFG_STATUS_OK)) {
+ if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
printf ("TX error status = 0x%08X\n",
le16_to_cpu (tx_ring[tx_cur].status));
goto Done;
diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c
index 59524a5ede..d056010c74 100644
--- a/drivers/net/fsl_mcdmafec.c
+++ b/drivers/net/fsl_mcdmafec.c
@@ -56,12 +56,12 @@
DECLARE_GLOBAL_DATA_PTR;
struct fec_info_dma fec_info[] = {
-#ifdef CFG_FEC0_IOBASE
+#ifdef CONFIG_SYS_FEC0_IOBASE
{
0, /* index */
- CFG_FEC0_IOBASE, /* io base */
- CFG_FEC0_PINMUX, /* gpio pin muxing */
- CFG_FEC0_MIIBASE, /* mii base */
+ CONFIG_SYS_FEC0_IOBASE, /* io base */
+ CONFIG_SYS_FEC0_PINMUX, /* gpio pin muxing */
+ CONFIG_SYS_FEC0_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
@@ -83,17 +83,17 @@ struct fec_info_dma fec_info[] = {
0, /* cleanTbdNum */
},
#endif
-#ifdef CFG_FEC1_IOBASE
+#ifdef CONFIG_SYS_FEC1_IOBASE
{
1, /* index */
- CFG_FEC1_IOBASE, /* io base */
- CFG_FEC1_PINMUX, /* gpio pin muxing */
- CFG_FEC1_MIIBASE, /* mii base */
+ CONFIG_SYS_FEC1_IOBASE, /* io base */
+ CONFIG_SYS_FEC1_PINMUX, /* gpio pin muxing */
+ CONFIG_SYS_FEC1_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
0, /* phy name init */
-#ifdef CFG_DMA_USE_INTSRAM
+#ifdef CONFIG_SYS_DMA_USE_INTSRAM
(cbd_t *)DBUF_LENGTH, /* RX BD */
#else
0, /* RX BD */
@@ -203,7 +203,7 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus);
/* process all the consumed TBDs */
- while (info->cleanTbdNum < CFG_TX_ETH_BUFFER) {
+ while (info->cleanTbdNum < CONFIG_SYS_TX_ETH_BUFFER) {
pUsedTbd = &info->txbd[info->usedTbdIdx];
if (pUsedTbd->cbd_sc & BD_ENET_TX_READY) {
#ifdef ET_DEBUG
@@ -214,14 +214,14 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
}
/* clean this buffer descriptor */
- if (info->usedTbdIdx == (CFG_TX_ETH_BUFFER - 1))
+ if (info->usedTbdIdx == (CONFIG_SYS_TX_ETH_BUFFER - 1))
pUsedTbd->cbd_sc = BD_ENET_TX_WRAP;
else
pUsedTbd->cbd_sc = 0;
/* update some indeces for a correct handling of the TBD ring */
info->cleanTbdNum++;
- info->usedTbdIdx = (info->usedTbdIdx + 1) % CFG_TX_ETH_BUFFER;
+ info->usedTbdIdx = (info->usedTbdIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
}
/* Check for valid length of data. */
@@ -240,7 +240,7 @@ static int fec_send(struct eth_device *dev, volatile void *packet, int length)
pTbd->cbd_datlen = length;
pTbd->cbd_bufaddr = (u32) packet;
pTbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY;
- info->txIdx = (info->txIdx + 1) % CFG_TX_ETH_BUFFER;
+ info->txIdx = (info->txIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
/* Enable DMA transmit task */
MCD_continDma(info->txTask);
@@ -379,15 +379,15 @@ static int fec_init(struct eth_device *dev, bd_t * bd)
fec_halt(dev);
#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
- defined (CFG_DISCOVER_PHY)
+ defined (CONFIG_SYS_DISCOVER_PHY)
mii_init();
set_fec_duplex_speed(fecp, bd, info->dup_spd);
#else
-#ifndef CFG_DISCOVER_PHY
+#ifndef CONFIG_SYS_DISCOVER_PHY
set_fec_duplex_speed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
-#endif /* ifndef CFG_DISCOVER_PHY */
+#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */
#endif /* CONFIG_CMD_MII || CONFIG_MII */
/* We use strictly polling mode only */
@@ -397,7 +397,7 @@ static int fec_init(struct eth_device *dev, bd_t * bd)
fecp->eir = 0xffffffff;
/* Set station address */
- if ((u32) fecp == CFG_FEC0_IOBASE) {
+ if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) {
fec_set_hwaddr(fecp, bd->bi_enetaddr);
} else {
fec_set_hwaddr(fecp, bd->bi_enet1addr);
@@ -421,15 +421,15 @@ static int fec_init(struct eth_device *dev, bd_t * bd)
/* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
* Settings: Last, Tx CRC */
- for (i = 0; i < CFG_TX_ETH_BUFFER; i++) {
+ for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) {
info->txbd[i].cbd_sc = 0;
info->txbd[i].cbd_datlen = 0;
info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
}
- info->txbd[CFG_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
+ info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
info->usedTbdIdx = 0;
- info->cleanTbdNum = CFG_TX_ETH_BUFFER;
+ info->cleanTbdNum = CONFIG_SYS_TX_ETH_BUFFER;
/* Set Rx FIFO alarm and granularity value */
fecp->rfcr = 0x0c000000;
@@ -516,14 +516,14 @@ int mcdmafec_initialize(bd_t * bis)
{
struct eth_device *dev;
int i;
-#ifdef CFG_DMA_USE_INTSRAM
- u32 tmp = CFG_INTSRAM + 0x2000;
+#ifdef CONFIG_SYS_DMA_USE_INTSRAM
+ u32 tmp = CONFIG_SYS_INTSRAM + 0x2000;
#endif
for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) {
dev =
- (struct eth_device *)memalign(CFG_CACHELINE_SIZE,
+ (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
sizeof *dev);
if (dev == NULL)
hang();
@@ -539,7 +539,7 @@ int mcdmafec_initialize(bd_t * bis)
dev->recv = fec_recv;
/* setup Receive and Transmit buffer descriptor */
-#ifdef CFG_DMA_USE_INTSRAM
+#ifdef CONFIG_SYS_DMA_USE_INTSRAM
fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
tmp = (u32)fec_info[i].rxbd;
fec_info[i].txbd =
@@ -548,17 +548,17 @@ int mcdmafec_initialize(bd_t * bis)
tmp = (u32)fec_info[i].txbd;
fec_info[i].txbuf =
(char *)((u32)fec_info[i].txbuf + tmp +
- (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+ (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
tmp = (u32)fec_info[i].txbuf;
#else
fec_info[i].rxbd =
- (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+ (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
(PKTBUFSRX * sizeof(cbd_t)));
fec_info[i].txbd =
- (cbd_t *) memalign(CFG_CACHELINE_SIZE,
- (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+ (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
+ (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
fec_info[i].txbuf =
- (char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH);
+ (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
#endif
#ifdef ET_DEBUG
@@ -566,7 +566,7 @@ int mcdmafec_initialize(bd_t * bis)
(int)fec_info[i].rxbd, (int)fec_info[i].txbd);
#endif
- fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32);
+ fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
eth_register(dev);
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index c23a4000a2..318bdf4a15 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -267,7 +267,7 @@ static void smc_shutdown (void);
static int poll4int (byte mask, int timeout)
{
- int tmo = get_timer (0) + timeout * CFG_HZ;
+ int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
int is_timeout = 0;
word old_bank = SMC_inw (LAN91C96_BANK_SELECT);
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 08bebf74a5..98e8c73cab 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -28,7 +28,7 @@
* allocate our own, but we need one such buffer in case a packet
* wraps around the DMA ring so that we have to copy it.
*
- * Therefore, define CFG_RX_ETH_BUFFER to 1 in the board-specific
+ * Therefore, define CONFIG_SYS_RX_ETH_BUFFER to 1 in the board-specific
* configuration header. This way, the core allocates one RX buffer
* and one TX buffer, each of which can hold a ethernet packet of
* maximum size.
@@ -52,11 +52,11 @@
#define barrier() asm volatile("" ::: "memory")
-#define CFG_MACB_RX_BUFFER_SIZE 4096
-#define CFG_MACB_RX_RING_SIZE (CFG_MACB_RX_BUFFER_SIZE / 128)
-#define CFG_MACB_TX_RING_SIZE 16
-#define CFG_MACB_TX_TIMEOUT 1000
-#define CFG_MACB_AUTONEG_TIMEOUT 5000000
+#define CONFIG_SYS_MACB_RX_BUFFER_SIZE 4096
+#define CONFIG_SYS_MACB_RX_RING_SIZE (CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128)
+#define CONFIG_SYS_MACB_TX_RING_SIZE 16
+#define CONFIG_SYS_MACB_TX_TIMEOUT 1000
+#define CONFIG_SYS_MACB_AUTONEG_TIMEOUT 5000000
struct macb_dma_desc {
u32 addr;
@@ -178,7 +178,7 @@ static int macb_send(struct eth_device *netdev, volatile void *packet,
ctrl = length & TXBUF_FRMLEN_MASK;
ctrl |= TXBUF_FRAME_END;
- if (tx_head == (CFG_MACB_TX_RING_SIZE - 1)) {
+ if (tx_head == (CONFIG_SYS_MACB_TX_RING_SIZE - 1)) {
ctrl |= TXBUF_WRAP;
macb->tx_head = 0;
} else
@@ -193,7 +193,7 @@ static int macb_send(struct eth_device *netdev, volatile void *packet,
* I guess this is necessary because the networking core may
* re-use the transmit buffer as soon as we return...
*/
- for (i = 0; i <= CFG_MACB_TX_TIMEOUT; i++) {
+ for (i = 0; i <= CONFIG_SYS_MACB_TX_TIMEOUT; i++) {
barrier();
ctrl = macb->tx_ring[tx_head].ctrl;
if (ctrl & TXBUF_USED)
@@ -203,7 +203,7 @@ static int macb_send(struct eth_device *netdev, volatile void *packet,
dma_unmap_single(packet, length, paddr);
- if (i <= CFG_MACB_TX_TIMEOUT) {
+ if (i <= CONFIG_SYS_MACB_TX_TIMEOUT) {
if (ctrl & TXBUF_UNDERRUN)
printf("%s: TX underrun\n", netdev->name);
if (ctrl & TXBUF_EXHAUSTED)
@@ -226,7 +226,7 @@ static void reclaim_rx_buffers(struct macb_device *macb,
while (i > new_tail) {
macb->rx_ring[i].addr &= ~RXADDR_USED;
i++;
- if (i > CFG_MACB_RX_RING_SIZE)
+ if (i > CONFIG_SYS_MACB_RX_RING_SIZE)
i = 0;
}
@@ -265,7 +265,7 @@ static int macb_recv(struct eth_device *netdev)
if (wrapped) {
unsigned int headlen, taillen;
- headlen = 128 * (CFG_MACB_RX_RING_SIZE
+ headlen = 128 * (CONFIG_SYS_MACB_RX_RING_SIZE
- macb->rx_tail);
taillen = length - headlen;
memcpy((void *)NetRxPackets[0],
@@ -276,11 +276,11 @@ static int macb_recv(struct eth_device *netdev)
}
NetReceive(buffer, length);
- if (++rx_tail >= CFG_MACB_RX_RING_SIZE)
+ if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE)
rx_tail = 0;
reclaim_rx_buffers(macb, rx_tail);
} else {
- if (++rx_tail >= CFG_MACB_RX_RING_SIZE) {
+ if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE) {
wrapped = 1;
rx_tail = 0;
}
@@ -303,7 +303,7 @@ static void macb_phy_reset(struct macb_device *macb)
macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
| BMCR_ANRESTART));
- for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+ for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_ANEGCOMPLETE)
break;
@@ -337,7 +337,7 @@ static int macb_phy_init(struct macb_device *macb)
/* Try to re-negotiate if we don't have link already. */
macb_phy_reset(macb);
- for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) {
+ for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_LSTATUS)
break;
@@ -388,16 +388,16 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
/* initialize DMA descriptors */
paddr = macb->rx_buffer_dma;
- for (i = 0; i < CFG_MACB_RX_RING_SIZE; i++) {
- if (i == (CFG_MACB_RX_RING_SIZE - 1))
+ for (i = 0; i < CONFIG_SYS_MACB_RX_RING_SIZE; i++) {
+ if (i == (CONFIG_SYS_MACB_RX_RING_SIZE - 1))
paddr |= RXADDR_WRAP;
macb->rx_ring[i].addr = paddr;
macb->rx_ring[i].ctrl = 0;
paddr += 128;
}
- for (i = 0; i < CFG_MACB_TX_RING_SIZE; i++) {
+ for (i = 0; i < CONFIG_SYS_MACB_TX_RING_SIZE; i++) {
macb->tx_ring[i].addr = 0;
- if (i == (CFG_MACB_TX_RING_SIZE - 1))
+ if (i == (CONFIG_SYS_MACB_TX_RING_SIZE - 1))
macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
else
macb->tx_ring[i].ctrl = TXBUF_USED;
@@ -473,12 +473,12 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
netdev = &macb->netdev;
- macb->rx_buffer = dma_alloc_coherent(CFG_MACB_RX_BUFFER_SIZE,
+ macb->rx_buffer = dma_alloc_coherent(CONFIG_SYS_MACB_RX_BUFFER_SIZE,
&macb->rx_buffer_dma);
- macb->rx_ring = dma_alloc_coherent(CFG_MACB_RX_RING_SIZE
+ macb->rx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_RX_RING_SIZE
* sizeof(struct macb_dma_desc),
&macb->rx_ring_dma);
- macb->tx_ring = dma_alloc_coherent(CFG_MACB_TX_RING_SIZE
+ macb->tx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_TX_RING_SIZE
* sizeof(struct macb_dma_desc),
&macb->tx_ring_dma);
diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c
index f93cf598e2..c00474e222 100644
--- a/drivers/net/mcffec.c
+++ b/drivers/net/mcffec.c
@@ -51,12 +51,12 @@
DECLARE_GLOBAL_DATA_PTR;
struct fec_info_s fec_info[] = {
-#ifdef CFG_FEC0_IOBASE
+#ifdef CONFIG_SYS_FEC0_IOBASE
{
0, /* index */
- CFG_FEC0_IOBASE, /* io base */
- CFG_FEC0_PINMUX, /* gpio pin muxing */
- CFG_FEC0_MIIBASE, /* mii base */
+ CONFIG_SYS_FEC0_IOBASE, /* io base */
+ CONFIG_SYS_FEC0_PINMUX, /* gpio pin muxing */
+ CONFIG_SYS_FEC0_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
@@ -70,17 +70,17 @@ struct fec_info_s fec_info[] = {
(struct fec_info_s *)-1,
},
#endif
-#ifdef CFG_FEC1_IOBASE
+#ifdef CONFIG_SYS_FEC1_IOBASE
{
1, /* index */
- CFG_FEC1_IOBASE, /* io base */
- CFG_FEC1_PINMUX, /* gpio pin muxing */
- CFG_FEC1_MIIBASE, /* mii base */
+ CONFIG_SYS_FEC1_IOBASE, /* io base */
+ CONFIG_SYS_FEC1_PINMUX, /* gpio pin muxing */
+ CONFIG_SYS_FEC1_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
0, /* phy name init */
-#ifdef CFG_FEC_BUF_USE_SRAM
+#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
(cbd_t *)DBUF_LENGTH, /* RX BD */
#else
0, /* RX BD */
@@ -103,7 +103,7 @@ void fec_reset(struct eth_device *dev);
extern int fecpin_setclear(struct eth_device *dev, int setclear);
-#ifdef CFG_DISCOVER_PHY
+#ifdef CONFIG_SYS_DISCOVER_PHY
extern void __mii_init(void);
extern uint mii_send(uint mii_cmd);
extern int mii_discover_phy(struct eth_device *dev);
@@ -175,7 +175,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length)
/* Activate transmit Buffer Descriptor polling */
fecp->tdar = 0x01000000; /* Descriptor polling active */
-#ifndef CFG_FEC_BUF_USE_SRAM
+#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
/*
* FEC unable to initial transmit data packet.
* A nop will ensure the descriptor polling active completed.
@@ -187,7 +187,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length)
#endif
-#ifdef CFG_UNIFY_CACHE
+#ifdef CONFIG_SYS_UNIFY_CACHE
icache_invalid();
#endif
@@ -222,9 +222,9 @@ int fec_recv(struct eth_device *dev)
int length;
for (;;) {
-#ifndef CFG_FEC_BUF_USE_SRAM
+#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
#endif
-#ifdef CFG_UNIFY_CACHE
+#ifdef CONFIG_SYS_UNIFY_CACHE
icache_invalid();
#endif
/* section 16.9.23.2 */
@@ -435,15 +435,15 @@ int fec_init(struct eth_device *dev, bd_t * bd)
fec_reset(dev);
#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
- defined (CFG_DISCOVER_PHY)
+ defined (CONFIG_SYS_DISCOVER_PHY)
mii_init();
setFecDuplexSpeed(fecp, bd, info->dup_spd);
#else
-#ifndef CFG_DISCOVER_PHY
+#ifndef CONFIG_SYS_DISCOVER_PHY
setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
-#endif /* ifndef CFG_DISCOVER_PHY */
+#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */
#endif /* CONFIG_CMD_MII || CONFIG_MII */
/* We use strictly polling mode only */
@@ -453,9 +453,9 @@ int fec_init(struct eth_device *dev, bd_t * bd)
fecp->eir = 0xffffffff;
/* Set station address */
- if ((u32) fecp == CFG_FEC0_IOBASE) {
-#ifdef CFG_FEC1_IOBASE
- volatile fec_t *fecp1 = (fec_t *) (CFG_FEC1_IOBASE);
+ if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) {
+#ifdef CONFIG_SYS_FEC1_IOBASE
+ volatile fec_t *fecp1 = (fec_t *) (CONFIG_SYS_FEC1_IOBASE);
ea = &bd->bi_enet1addr[0];
fecp1->palr =
(ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
@@ -466,14 +466,14 @@ int fec_init(struct eth_device *dev, bd_t * bd)
(ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
fecp->paur = (ea[4] << 24) | (ea[5] << 16);
} else {
-#ifdef CFG_FEC0_IOBASE
- volatile fec_t *fecp0 = (fec_t *) (CFG_FEC0_IOBASE);
+#ifdef CONFIG_SYS_FEC0_IOBASE
+ volatile fec_t *fecp0 = (fec_t *) (CONFIG_SYS_FEC0_IOBASE);
ea = &bd->bi_enetaddr[0];
fecp0->palr =
(ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
fecp0->paur = (ea[4] << 24) | (ea[5] << 16);
#endif
-#ifdef CFG_FEC1_IOBASE
+#ifdef CONFIG_SYS_FEC1_IOBASE
ea = &bd->bi_enet1addr[0];
fecp->palr =
(ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
@@ -568,14 +568,14 @@ int mcffec_initialize(bd_t * bis)
{
struct eth_device *dev;
int i;
-#ifdef CFG_FEC_BUF_USE_SRAM
- u32 tmp = CFG_INIT_RAM_ADDR + 0x1000;
+#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
+ u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000;
#endif
for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) {
dev =
- (struct eth_device *)memalign(CFG_CACHELINE_SIZE,
+ (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
sizeof *dev);
if (dev == NULL)
hang();
@@ -591,7 +591,7 @@ int mcffec_initialize(bd_t * bis)
dev->recv = fec_recv;
/* setup Receive and Transmit buffer descriptor */
-#ifdef CFG_FEC_BUF_USE_SRAM
+#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
tmp = (u32)fec_info[i].rxbd;
fec_info[i].txbd =
@@ -600,17 +600,17 @@ int mcffec_initialize(bd_t * bis)
tmp = (u32)fec_info[i].txbd;
fec_info[i].txbuf =
(char *)((u32)fec_info[i].txbuf + tmp +
- (CFG_TX_ETH_BUFFER * sizeof(cbd_t)));
+ (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
tmp = (u32)fec_info[i].txbuf;
#else
fec_info[i].rxbd =
- (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+ (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
(PKTBUFSRX * sizeof(cbd_t)));
fec_info[i].txbd =
- (cbd_t *) memalign(CFG_CACHELINE_SIZE,
+ (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
(TX_BUF_CNT * sizeof(cbd_t)));
fec_info[i].txbuf =
- (char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH);
+ (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
#endif
#ifdef ET_DEBUG
@@ -618,7 +618,7 @@ int mcffec_initialize(bd_t * bis)
(int)fec_info[i].rxbd, (int)fec_info[i].txbd);
#endif
- fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32);
+ fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
eth_register(dev);
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
index 4a0770814d..f93f932277 100644
--- a/drivers/net/ne2000_base.c
+++ b/drivers/net/ne2000_base.c
@@ -740,7 +740,7 @@ int eth_send(volatile void *packet, int length) {
pkey = -1;
dp83902a_send((u8 *) packet, length, 666);
- tmo = get_timer (0) + TOUT * CFG_HZ;
+ tmo = get_timer (0) + TOUT * CONFIG_SYS_HZ;
while(1) {
dp83902a_poll();
if (pkey != -1) {
diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c
index c011809b6f..c9e324ee26 100644
--- a/drivers/net/netarm_eth.c
+++ b/drivers/net/netarm_eth.c
@@ -56,7 +56,7 @@ static void na_mii_write (int reg, int value)
int mii_addr;
/* Select register */
- mii_addr = CFG_ETH_PHY_ADDR + reg;
+ mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
/* Write value */
SET_EADDR (NETARM_ETH_MII_WRITE, value);
@@ -68,7 +68,7 @@ static unsigned int na_mii_read (int reg)
int mii_addr, val;
/* Select register */
- mii_addr = CFG_ETH_PHY_ADDR + reg;
+ mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
/* do one management cycle */
SET_EADDR (NETARM_ETH_MII_CMD,
diff --git a/drivers/net/ns7520_eth.c b/drivers/net/ns7520_eth.c
index e19c223255..c28726e698 100644
--- a/drivers/net/ns7520_eth.c
+++ b/drivers/net/ns7520_eth.c
@@ -86,8 +86,8 @@ static int nDebugLvl = DEBUG_ERROR_CRIT;
# define ASSERT(expr, func)
#endif /* DEBUG */
-#define NS7520_MII_NEG_DELAY (5*CFG_HZ) /* in s */
-#define TX_TIMEOUT (5*CFG_HZ) /* in s */
+#define NS7520_MII_NEG_DELAY (5*CONFIG_SYS_HZ) /* in s */
+#define TX_TIMEOUT (5*CONFIG_SYS_HZ) /* in s */
#define RX_STALL_WORKAROUND_CNT 100
static int ns7520_eth_reset(void);
diff --git a/drivers/net/ns9750_eth.c b/drivers/net/ns9750_eth.c
index cade831ac9..d4901b4118 100644
--- a/drivers/net/ns9750_eth.c
+++ b/drivers/net/ns9750_eth.c
@@ -90,8 +90,8 @@ static int nDebugLvl = DEBUG_ERROR_CRIT;
# define ASSERT(expr, func)
#endif /* DEBUG */
-#define NS9750_MII_NEG_DELAY (5*CFG_HZ) /* in s */
-#define TX_TIMEOUT (5*CFG_HZ) /* in s */
+#define NS9750_MII_NEG_DELAY (5*CONFIG_SYS_HZ) /* in s */
+#define TX_TIMEOUT (5*CONFIG_SYS_HZ) /* in s */
/* @TODO move it to eeprom.h */
#define FS_EEPROM_AUTONEG_MASK 0x7
diff --git a/drivers/net/phy/miiphybb.c b/drivers/net/phy/miiphybb.c
index 6446012f95..e3c163a349 100644
--- a/drivers/net/phy/miiphybb.c
+++ b/drivers/net/phy/miiphybb.c
@@ -39,7 +39,7 @@ static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
{
int j; /* counter */
#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
- volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+ volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
#endif
/*
@@ -124,7 +124,7 @@ int bb_miiphy_read (char *devname, unsigned char addr,
short rdreg; /* register working value */
int j; /* counter */
#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
- volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+ volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
#endif
miiphy_pre (1, addr, reg);
@@ -191,7 +191,7 @@ int bb_miiphy_write (char *devname, unsigned char addr,
{
int j; /* counter */
#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
- volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+ volatile ioport_t *iop = ioport_addr ((immap_t *) CONFIG_SYS_IMMR, MDIO_PORT);
#endif
miiphy_pre (0, addr, reg);
diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h
index af34d7b96f..8d372b58d9 100644
--- a/drivers/net/sk98lin/h/skdrv1st.h
+++ b/drivers/net/sk98lin/h/skdrv1st.h
@@ -174,7 +174,7 @@ typedef struct s_AC SK_AC;
#if 0
#define SK_TICKS_PER_SEC HZ
#else
-#define SK_TICKS_PER_SEC CFG_HZ
+#define SK_TICKS_PER_SEC CONFIG_SYS_HZ
#endif
#define SK_MEM_MAPPED_IO
diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
index 52dc83f8bc..8aad4425f7 100644
--- a/drivers/net/sk98lin/h/skgehw.h
+++ b/drivers/net/sk98lin/h/skgehw.h
@@ -1107,10 +1107,10 @@ extern "C" {
/* Values of connector and PMD type comply to SysKonnect internal std */
/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */
-#define CFG_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */
+#define CONFIG_SYS_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */
/* Bit 3.. 2: reserved */
-#define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */
-#define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/
+#define CONFIG_SYS_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */
+#define CONFIG_SYS_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/
/* B2_CHIP_ID 8 bit Chip Identification Number */
#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index ab740c7fcd..df63f27e84 100644
--- a/drivers/net/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -1882,10 +1882,10 @@ SK_IOC IoC) /* IO context */
/* read number of MACs */
SK_IN8(IoC, B2_MAC_CFG, &Byte);
- pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2;
+ pAC->GIni.GIMacsFound = (Byte & CONFIG_SYS_SNG_MAC) ? 1 : 2;
/* get Chip Revision Number */
- pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4);
+ pAC->GIni.GIChipRev = (SK_U8)((Byte & CONFIG_SYS_CHIP_R_MSK) >> 4);
/* get diff. PCI parameters */
SK_IN16(IoC, B0_CTST, &CtrlStat);
diff --git a/drivers/net/sk98lin/u-boot_compat.h b/drivers/net/sk98lin/u-boot_compat.h
index 1e385f8ef5..cadf402962 100644
--- a/drivers/net/sk98lin/u-boot_compat.h
+++ b/drivers/net/sk98lin/u-boot_compat.h
@@ -54,7 +54,7 @@
#define EAGAIN 2
#define EBUSY 3
-#define HZ CFG_HZ
+#define HZ CONFIG_SYS_HZ
#define printk printf
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index e8b235b4ab..82abb02015 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -383,7 +383,7 @@ static void smc_write_phy_register(byte phyreg, word phydata);
static int poll4int (byte mask, int timeout)
{
- int tmo = get_timer (0) + timeout * CFG_HZ;
+ int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ;
int is_timeout = 0;
word old_bank = SMC_inw (BSR_REG);
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index e34076ff76..d7da0819d1 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -305,8 +305,8 @@ static int init_phy(struct eth_device *dev)
volatile tsec_t *regs = priv->regs;
/* Assign a Physical address to the TBI */
- regs->tbipa = CFG_TBIPA_VALUE;
- phyregs->tbipa = CFG_TBIPA_VALUE;
+ regs->tbipa = CONFIG_SYS_TBIPA_VALUE;
+ phyregs->tbipa = CONFIG_SYS_TBIPA_VALUE;
asm("sync");
/* Reset MII (due to new addresses) */
@@ -1357,11 +1357,11 @@ struct phy_info phy_info_VSC8601 = {
/* Override PHY config settings */
/* Configure some basic stuff */
{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-#ifdef CFG_VSC8601_SKEWFIX
+#ifdef CONFIG_SYS_VSC8601_SKEWFIX
{MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL},
-#if defined(CFG_VSC8601_SKEW_TX) && defined(CFG_VSC8601_SKEW_RX)
+#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
{MIIM_EXT_PAGE_ACCESS,1,NULL},
-#define VSC8101_SKEW (CFG_VSC8601_SKEW_TX<<14)|(CFG_VSC8601_SKEW_RX<<12)
+#define VSC8101_SKEW (CONFIG_SYS_VSC8601_SKEW_TX<<14)|(CONFIG_SYS_VSC8601_SKEW_RX<<12)
{MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL},
{MIIM_EXT_PAGE_ACCESS,0,NULL},
#endif
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 50fa765f70..079354aaff 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -54,7 +54,7 @@ printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
#define RX_PRINT_ERRORS
#define TX_PRINT_ERRORS
-#define ETH_BASE (CFG_TSI108_CSR_BASE + 0x6000)
+#define ETH_BASE (CONFIG_SYS_TSI108_CSR_BASE + 0x6000)
#define ETH_PORT_OFFSET 0x400
diff --git a/drivers/net/vsc7385.c b/drivers/net/vsc7385.c
index 4e7259fd96..ada42c41f8 100644
--- a/drivers/net/vsc7385.c
+++ b/drivers/net/vsc7385.c
@@ -35,13 +35,13 @@ int vsc7385_upload_firmware(void *firmware, unsigned int size)
u8 *fw = firmware;
unsigned int i;
- u32 *gloreset = (u32 *) (CFG_VSC7385_BASE + 0x1c050);
- u32 *icpu_ctrl = (u32 *) (CFG_VSC7385_BASE + 0x1c040);
- u32 *icpu_addr = (u32 *) (CFG_VSC7385_BASE + 0x1c044);
- u32 *icpu_data = (u32 *) (CFG_VSC7385_BASE + 0x1c048);
- u32 *icpu_rom_map = (u32 *) (CFG_VSC7385_BASE + 0x1c070);
+ u32 *gloreset = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c050);
+ u32 *icpu_ctrl = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c040);
+ u32 *icpu_addr = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c044);
+ u32 *icpu_data = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c048);
+ u32 *icpu_rom_map = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c070);
#ifdef DEBUG
- u32 *chipid = (u32 *) (CFG_VSC7385_BASE + 0x1c060);
+ u32 *chipid = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c060);
#endif
out_be32(gloreset, 3);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b5eea89e7d..41780dbe74 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -157,7 +157,7 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
for (hose = hose_head; hose; hose = hose->next)
{
-#ifdef CFG_SCSI_SCAN_BUS_REVERSE
+#ifdef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
for (bus = hose->last_busno; bus >= hose->first_busno; bus--)
#else
for (bus = hose->first_busno; bus <= hose->last_busno; bus++)
diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c
index 2acf9bf780..3844359513 100644
--- a/drivers/pci/pci_auto.c
+++ b/drivers/pci/pci_auto.c
@@ -26,9 +26,9 @@
#define PCIAUTO_IDE_MODE_MASK 0x05
-/* the user can define CFG_PCI_CACHE_LINE_SIZE to avoid problems */
-#ifndef CFG_PCI_CACHE_LINE_SIZE
-#define CFG_PCI_CACHE_LINE_SIZE 8
+/* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
+#ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
#endif
/*
@@ -154,7 +154,7 @@ void pciauto_setup_device(struct pci_controller *hose,
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
- CFG_PCI_CACHE_LINE_SIZE);
+ CONFIG_SYS_PCI_CACHE_LINE_SIZE);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
}
diff --git a/drivers/pci/tsi108_pci.c b/drivers/pci/tsi108_pci.c
index edd614f236..d153fc6beb 100644
--- a/drivers/pci/tsi108_pci.c
+++ b/drivers/pci/tsi108_pci.c
@@ -47,32 +47,32 @@ void tsi108_clear_pci_error (void)
* requests.
*/
/* Read PB Error Log Registers */
- err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ err_stat = *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
TSI108_PB_REG_OFFSET + PB_ERRCS);
- err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ err_addr = *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
TSI108_PB_REG_OFFSET + PB_AERR);
if (err_stat & PB_ERRCS_ES) {
/* Clear PCI/X bus errors if applicable */
- if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) {
+ if ((err_addr & 0xFF000000) == CONFIG_SYS_PCI_CFG_BASE) {
/* Clear error flag */
- *(u32 *) (CFG_TSI108_CSR_BASE +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
TSI108_PB_REG_OFFSET + PB_ERRCS) =
PB_ERRCS_ES;
/* Clear read error reported in PB_ISR */
- *(u32 *) (CFG_TSI108_CSR_BASE +
+ *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
TSI108_PB_REG_OFFSET + PB_ISR) =
PB_ISR_PBS_RD_ERR;
/* Clear errors reported by PCI CSR (Normally Master Abort) */
- pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ pci_stat = *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
TSI108_PCI_REG_OFFSET +
PCI_CSR);
- *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
TSI108_PCI_REG_OFFSET + PCI_CSR) =
pci_stat;
- *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+ *(volatile u32 *)(CONFIG_SYS_TSI108_CSR_BASE +
TSI108_PCI_REG_OFFSET +
PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR;
}
@@ -102,8 +102,8 @@ unsigned int __get_pci_config_dword (u32 addr)
static int tsi108_read_config_dword (struct pci_controller *hose,
pci_dev_t dev, int offset, u32 * value)
{
- dev &= (CFG_PCI_CFG_SIZE - 1);
- dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+ dev &= (CONFIG_SYS_PCI_CFG_SIZE - 1);
+ dev |= (CONFIG_SYS_PCI_CFG_BASE | (offset & 0xfc));
*value = __get_pci_config_dword(dev);
if (0xFFFFFFFF == *value)
tsi108_clear_pci_error ();
@@ -113,8 +113,8 @@ static int tsi108_read_config_dword (struct pci_controller *hose,
static int tsi108_write_config_dword (struct pci_controller *hose,
pci_dev_t dev, int offset, u32 value)
{
- dev &= (CFG_PCI_CFG_SIZE - 1);
- dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+ dev &= (CONFIG_SYS_PCI_CFG_SIZE - 1);
+ dev |= (CONFIG_SYS_PCI_CFG_BASE | (offset & 0xfc));
out_le32 ((volatile unsigned *)dev, value);
@@ -129,19 +129,19 @@ void pci_init_board (void)
hose->last_busno = 0xff;
pci_set_region (hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
+ CONFIG_SYS_PCI_MEMORY_BUS,
+ CONFIG_SYS_PCI_MEMORY_PHYS,
+ CONFIG_SYS_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
/* PCI memory space */
pci_set_region (hose->regions + 1,
- CFG_PCI_MEM_BUS,
- CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+ CONFIG_SYS_PCI_MEM_BUS,
+ CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM);
/* PCI I/O space */
pci_set_region (hose->regions + 2,
- CFG_PCI_IO_BUS,
- CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+ CONFIG_SYS_PCI_IO_BUS,
+ CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO);
hose->region_count = 3;
diff --git a/drivers/pci/w83c553f.c b/drivers/pci/w83c553f.c
index d7355a4084..85614223f0 100644
--- a/drivers/pci/w83c553f.c
+++ b/drivers/pci/w83c553f.c
@@ -42,7 +42,7 @@
out_be16((u16*) (addr),(val)); udelay(1); \
} while (0)
-extern uint ide_bus_offset[CFG_IDE_MAXBUS];
+extern uint ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
void initialise_pic(void);
void initialise_dma(void);
@@ -105,7 +105,7 @@ void initialise_w83c553f(void)
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]);
ide_bus_offset[0] &= ~1;
-#if CFG_IDE_MAXBUS > 1
+#if CONFIG_SYS_IDE_MAXBUS > 1
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]);
ide_bus_offset[1] &= ~1;
#endif
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 1e2431e497..1bcb3a52eb 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -909,8 +909,8 @@ int i82365_init (void)
mem.map = 0;
mem.flags = MAP_ATTRIB | MAP_ACTIVE;
mem.speed = 300;
- mem.sys_start = CFG_PCMCIA_MEM_ADDR;
- mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+ mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
+ mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
mem.card_start = 0;
i365_set_mem_map (&socket, &mem);
@@ -918,8 +918,8 @@ int i82365_init (void)
mem.map = 1;
mem.flags = MAP_ACTIVE;
mem.speed = 300;
- mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE;
- mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1;
+ mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE;
+ mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + (2 * CONFIG_SYS_PCMCIA_MEM_SIZE) - 1;
mem.card_start = 0;
i365_set_mem_map (&socket, &mem);
@@ -988,8 +988,8 @@ static void i82365_dump_regions (pci_dev_t dev)
{
u_int tmp[2];
u_int *mem = (void *) socket.cb_phys;
- u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
- u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+ u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
+ u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
pci_read_config_dword (dev, 0x00, tmp + 0);
pci_read_config_dword (dev, 0x80, tmp + 1);
diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c
index d075ba37cd..f715dec5f1 100644
--- a/drivers/pcmcia/marubun_pcmcia.c
+++ b/drivers/pcmcia/marubun_pcmcia.c
@@ -38,20 +38,20 @@
#if defined(CONFIG_PCMCIA)
/* MR-SHPC-01 register */
-#define MRSHPC_MODE (CFG_MARUBUN_MRSHPC + 4)
-#define MRSHPC_OPTION (CFG_MARUBUN_MRSHPC + 6)
-#define MRSHPC_CSR (CFG_MARUBUN_MRSHPC + 8)
-#define MRSHPC_ISR (CFG_MARUBUN_MRSHPC + 10)
-#define MRSHPC_ICR (CFG_MARUBUN_MRSHPC + 12)
-#define MRSHPC_CPWCR (CFG_MARUBUN_MRSHPC + 14)
-#define MRSHPC_MW0CR1 (CFG_MARUBUN_MRSHPC + 16)
-#define MRSHPC_MW1CR1 (CFG_MARUBUN_MRSHPC + 18)
-#define MRSHPC_IOWCR1 (CFG_MARUBUN_MRSHPC + 20)
-#define MRSHPC_MW0CR2 (CFG_MARUBUN_MRSHPC + 22)
-#define MRSHPC_MW1CR2 (CFG_MARUBUN_MRSHPC + 24)
-#define MRSHPC_IOWCR2 (CFG_MARUBUN_MRSHPC + 26)
-#define MRSHPC_CDCR (CFG_MARUBUN_MRSHPC + 28)
-#define MRSHPC_PCIC_INFO (CFG_MARUBUN_MRSHPC + 30)
+#define MRSHPC_MODE (CONFIG_SYS_MARUBUN_MRSHPC + 4)
+#define MRSHPC_OPTION (CONFIG_SYS_MARUBUN_MRSHPC + 6)
+#define MRSHPC_CSR (CONFIG_SYS_MARUBUN_MRSHPC + 8)
+#define MRSHPC_ISR (CONFIG_SYS_MARUBUN_MRSHPC + 10)
+#define MRSHPC_ICR (CONFIG_SYS_MARUBUN_MRSHPC + 12)
+#define MRSHPC_CPWCR (CONFIG_SYS_MARUBUN_MRSHPC + 14)
+#define MRSHPC_MW0CR1 (CONFIG_SYS_MARUBUN_MRSHPC + 16)
+#define MRSHPC_MW1CR1 (CONFIG_SYS_MARUBUN_MRSHPC + 18)
+#define MRSHPC_IOWCR1 (CONFIG_SYS_MARUBUN_MRSHPC + 20)
+#define MRSHPC_MW0CR2 (CONFIG_SYS_MARUBUN_MRSHPC + 22)
+#define MRSHPC_MW1CR2 (CONFIG_SYS_MARUBUN_MRSHPC + 24)
+#define MRSHPC_IOWCR2 (CONFIG_SYS_MARUBUN_MRSHPC + 26)
+#define MRSHPC_CDCR (CONFIG_SYS_MARUBUN_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (CONFIG_SYS_MARUBUN_MRSHPC + 30)
int pcmcia_on (void)
{
@@ -98,8 +98,8 @@ int pcmcia_on (void)
outw(0x0000,MRSHPC_ISR);
outw(0x2000,MRSHPC_ICR);
- outb(0x00,(CFG_MARUBUN_MW2 + 0x206));
- outb(0x42,(CFG_MARUBUN_MW2 + 0x200));
+ outb(0x00,(CONFIG_SYS_MARUBUN_MW2 + 0x206));
+ outb(0x42,(CONFIG_SYS_MARUBUN_MW2 + 0x200));
return 0;
}
diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c
index 14477a4487..95ea5e999f 100644
--- a/drivers/pcmcia/mpc8xx_pcmcia.c
+++ b/drivers/pcmcia/mpc8xx_pcmcia.c
@@ -34,8 +34,8 @@ static u_int m8xx_get_speed(u_int ns, u_int is_io);
/* look up table for pgcrx registers */
u_int *pcmcia_pgcrx[2] = {
- &((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcra,
- &((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb,
+ &((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcra,
+ &((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb,
};
/*
@@ -66,11 +66,11 @@ static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
#endif
#if defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
-#define CFG_PCMCIA_TIMING ( PCMCIA_SHT(9) \
+#define CONFIG_SYS_PCMCIA_TIMING ( PCMCIA_SHT(9) \
| PCMCIA_SST(3) \
| PCMCIA_SL(12))
#else
-#define CFG_PCMCIA_TIMING ( PCMCIA_SHT(2) \
+#define CONFIG_SYS_PCMCIA_TIMING ( PCMCIA_SHT(2) \
| PCMCIA_SST(4) \
| PCMCIA_SL(9))
#endif
@@ -88,12 +88,12 @@ int pcmcia_on (void)
debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
/* intialize the fixed memory windows */
- win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
- base = CFG_PCMCIA_MEM_ADDR;
+ win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
+ base = CONFIG_SYS_PCMCIA_MEM_ADDR;
- if((reg = m8xx_get_graycode(CFG_PCMCIA_MEM_SIZE)) == -1) {
+ if((reg = m8xx_get_graycode(CONFIG_SYS_PCMCIA_MEM_SIZE)) == -1) {
printf ("Cannot set window size to 0x%08x\n",
- CFG_PCMCIA_MEM_SIZE);
+ CONFIG_SYS_PCMCIA_MEM_SIZE);
return (1);
}
@@ -125,7 +125,7 @@ int pcmcia_on (void)
| PCMCIA_PRS_ATTR
| slotbit
| PCMCIA_PV
- | CFG_PCMCIA_TIMING );
+ | CONFIG_SYS_PCMCIA_TIMING );
break;
}
case 5:
@@ -135,7 +135,7 @@ int pcmcia_on (void)
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
- | CFG_PCMCIA_TIMING );
+ | CONFIG_SYS_PCMCIA_TIMING );
break;
}
case 6:
@@ -145,7 +145,7 @@ int pcmcia_on (void)
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
- | CFG_PCMCIA_TIMING );
+ | CONFIG_SYS_PCMCIA_TIMING );
break;
}
#endif /* CONFIG_IDE_8xx_PCCARD */
@@ -157,7 +157,7 @@ int pcmcia_on (void)
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
- | CFG_PCMCIA_TIMING );
+ | CONFIG_SYS_PCMCIA_TIMING );
break;
}
#endif /* CONFIG_HMI10 */
@@ -168,7 +168,7 @@ int pcmcia_on (void)
debug ("MemWin %d: PBR 0x%08lX POR %08lX\n",
i, win->br, win->or);
- base += CFG_PCMCIA_MEM_SIZE;
+ base += CONFIG_SYS_PCMCIA_MEM_SIZE;
++win;
}
@@ -198,14 +198,14 @@ int pcmcia_off (void)
printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
/* clear interrupt state, and disable interrupts */
- ((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pscr = PCMCIA_MASK(_slot_);
- ((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
+ ((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pscr = PCMCIA_MASK(_slot_);
+ ((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
/* turn off interrupt and disable CxOE */
PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
/* turn off memory windows */
- win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
+ win = (pcmcia_win_t *)(&((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pbr0);
for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
/* disable memory window */
diff --git a/drivers/pcmcia/pxa_pcmcia.c b/drivers/pcmcia/pxa_pcmcia.c
index 11d8590d7b..d06ab746c8 100644
--- a/drivers/pcmcia/pxa_pcmcia.c
+++ b/drivers/pcmcia/pxa_pcmcia.c
@@ -13,12 +13,12 @@ static inline void msWait(unsigned msVal)
int pcmcia_on (void)
{
unsigned int reg_arr[] = {
- 0x48000028, CFG_MCMEM0_VAL,
- 0x4800002c, CFG_MCMEM1_VAL,
- 0x48000030, CFG_MCATT0_VAL,
- 0x48000034, CFG_MCATT1_VAL,
- 0x48000038, CFG_MCIO0_VAL,
- 0x4800003c, CFG_MCIO1_VAL,
+ 0x48000028, CONFIG_SYS_MCMEM0_VAL,
+ 0x4800002c, CONFIG_SYS_MCMEM1_VAL,
+ 0x48000030, CONFIG_SYS_MCATT0_VAL,
+ 0x48000034, CONFIG_SYS_MCATT1_VAL,
+ 0x48000038, CONFIG_SYS_MCIO0_VAL,
+ 0x4800003c, CONFIG_SYS_MCIO1_VAL,
0, 0
};
diff --git a/drivers/pcmcia/ti_pci1410a.c b/drivers/pcmcia/ti_pci1410a.c
index c876d0c402..6ab97597f7 100644
--- a/drivers/pcmcia/ti_pci1410a.c
+++ b/drivers/pcmcia/ti_pci1410a.c
@@ -88,8 +88,8 @@ const char *indent = "\t ";
int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
-#ifndef CFG_FIRST_PCMCIA_BUS
-# define CFG_FIRST_PCMCIA_BUS 0
+#ifndef CONFIG_SYS_FIRST_PCMCIA_BUS
+# define CONFIG_SYS_FIRST_PCMCIA_BUS 0
#endif
int rcode = 0;
@@ -99,7 +99,7 @@ int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 1;
}
if (strcmp(argv[1],"on") == 0) {
- rcode = pcmcia_on(CFG_FIRST_PCMCIA_BUS);
+ rcode = pcmcia_on(CONFIG_SYS_FIRST_PCMCIA_BUS);
} else if (strcmp(argv[1],"off") == 0) {
rcode = pcmcia_off();
} else {
@@ -148,11 +148,11 @@ int pcmcia_on(int ide_base_bus)
debug("Enable PCMCIA Ti PCI1410A\n");
}
- pcmcia_cis_ptr = CFG_PCMCIA_CIS_WIN;
- cis_len = CFG_PCMCIA_CIS_WIN_SIZE;
+ pcmcia_cis_ptr = CONFIG_SYS_PCMCIA_CIS_WIN;
+ cis_len = CONFIG_SYS_PCMCIA_CIS_WIN_SIZE;
- io_base = CFG_PCMCIA_IO_WIN;
- io_len = CFG_PCMCIA_IO_WIN_SIZE;
+ io_base = CONFIG_SYS_PCMCIA_IO_WIN;
+ io_len = CONFIG_SYS_PCMCIA_IO_WIN_SIZE;
/*
* Setup the PCI device.
diff --git a/drivers/pcmcia/tqm8xx_pcmcia.c b/drivers/pcmcia/tqm8xx_pcmcia.c
index cc980c2ea3..6ba8b5c01f 100644
--- a/drivers/pcmcia/tqm8xx_pcmcia.c
+++ b/drivers/pcmcia/tqm8xx_pcmcia.c
@@ -40,7 +40,7 @@
static inline void power_config(int slot)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
/*
* Configure Port B pins for
* 5 Volts Enable and 3 Volts enable
@@ -50,21 +50,21 @@ static inline void power_config(int slot)
static inline void power_off(int slot)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
/* remove all power */
immap->im_cpm.cp_pbdat |= 0x00000300;
}
static inline void power_on_5_0(int slot)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
immap->im_cpm.cp_pbdat &= ~(0x0000100);
immap->im_cpm.cp_pbdir |= 0x00000300;
}
static inline void power_on_3_3(int slot)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
immap->im_cpm.cp_pbdat &= ~(0x0000200);
immap->im_cpm.cp_pbdir |= 0x00000300;
}
@@ -97,7 +97,7 @@ static inline void power_on_3_3(int slot)
static inline void power_config(int slot)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable
@@ -108,20 +108,20 @@ static inline void power_config(int slot)
static inline void power_off(int slot)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
}
static inline void power_on_5_0(int slot)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
immap->im_ioport.iop_pcdat |= 0x0004;
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
}
static inline void power_on_3_3(int slot)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
immap->im_ioport.iop_pcdat |= 0x0002;
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
}
@@ -132,14 +132,14 @@ static inline void power_on_3_3(int slot)
static inline int check_card_is_absent(int slot)
{
volatile pcmconf8xx_t *pcmp =
- (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
return pcmp->pcmc_pipr & (0x10000000 >> (slot << 4));
}
#else
static inline int check_card_is_absent(int slot)
{
volatile pcmconf8xx_t *pcmp =
- (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
return pcmp->pcmc_pipr & (0x18000000 >> (slot << 4));
}
#endif
@@ -153,9 +153,9 @@ static inline int check_card_is_absent(int slot)
int pcmcia_hardware_enable(int slot)
{
volatile pcmconf8xx_t *pcmp =
- (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
volatile sysconf8xx_t *sysp =
- (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+ (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
uint reg, mask;
debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
@@ -271,7 +271,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
u_long reg;
# ifdef DEBUG
volatile pcmconf8xx_t *pcmp =
- (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
# endif
debug ("voltage_set: " PCMCIA_BOARD_MSG
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 0d48360a2d..ed7ed65759 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -34,12 +34,12 @@
#ifdef CONFIG_UEC_ETH1
static uec_info_t eth1_uec_info = {
.uf_info = {
- .ucc_num = CFG_UEC1_UCC_NUM,
- .rx_clock = CFG_UEC1_RX_CLK,
- .tx_clock = CFG_UEC1_TX_CLK,
- .eth_type = CFG_UEC1_ETH_TYPE,
+ .ucc_num = CONFIG_SYS_UEC1_UCC_NUM,
+ .rx_clock = CONFIG_SYS_UEC1_RX_CLK,
+ .tx_clock = CONFIG_SYS_UEC1_TX_CLK,
+ .eth_type = CONFIG_SYS_UEC1_ETH_TYPE,
},
-#if (CFG_UEC1_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC1_ETH_TYPE == FAST_ETH)
.num_threads_tx = UEC_NUM_OF_THREADS_1,
.num_threads_rx = UEC_NUM_OF_THREADS_1,
#else
@@ -50,19 +50,19 @@ static uec_info_t eth1_uec_info = {
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.tx_bd_ring_len = 16,
.rx_bd_ring_len = 16,
- .phy_address = CFG_UEC1_PHY_ADDR,
- .enet_interface = CFG_UEC1_INTERFACE_MODE,
+ .phy_address = CONFIG_SYS_UEC1_PHY_ADDR,
+ .enet_interface = CONFIG_SYS_UEC1_INTERFACE_MODE,
};
#endif
#ifdef CONFIG_UEC_ETH2
static uec_info_t eth2_uec_info = {
.uf_info = {
- .ucc_num = CFG_UEC2_UCC_NUM,
- .rx_clock = CFG_UEC2_RX_CLK,
- .tx_clock = CFG_UEC2_TX_CLK,
- .eth_type = CFG_UEC2_ETH_TYPE,
+ .ucc_num = CONFIG_SYS_UEC2_UCC_NUM,
+ .rx_clock = CONFIG_SYS_UEC2_RX_CLK,
+ .tx_clock = CONFIG_SYS_UEC2_TX_CLK,
+ .eth_type = CONFIG_SYS_UEC2_ETH_TYPE,
},
-#if (CFG_UEC2_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC2_ETH_TYPE == FAST_ETH)
.num_threads_tx = UEC_NUM_OF_THREADS_1,
.num_threads_rx = UEC_NUM_OF_THREADS_1,
#else
@@ -73,19 +73,19 @@ static uec_info_t eth2_uec_info = {
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.tx_bd_ring_len = 16,
.rx_bd_ring_len = 16,
- .phy_address = CFG_UEC2_PHY_ADDR,
- .enet_interface = CFG_UEC2_INTERFACE_MODE,
+ .phy_address = CONFIG_SYS_UEC2_PHY_ADDR,
+ .enet_interface = CONFIG_SYS_UEC2_INTERFACE_MODE,
};
#endif
#ifdef CONFIG_UEC_ETH3
static uec_info_t eth3_uec_info = {
.uf_info = {
- .ucc_num = CFG_UEC3_UCC_NUM,
- .rx_clock = CFG_UEC3_RX_CLK,
- .tx_clock = CFG_UEC3_TX_CLK,
- .eth_type = CFG_UEC3_ETH_TYPE,
+ .ucc_num = CONFIG_SYS_UEC3_UCC_NUM,
+ .rx_clock = CONFIG_SYS_UEC3_RX_CLK,
+ .tx_clock = CONFIG_SYS_UEC3_TX_CLK,
+ .eth_type = CONFIG_SYS_UEC3_ETH_TYPE,
},
-#if (CFG_UEC3_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC3_ETH_TYPE == FAST_ETH)
.num_threads_tx = UEC_NUM_OF_THREADS_1,
.num_threads_rx = UEC_NUM_OF_THREADS_1,
#else
@@ -96,19 +96,19 @@ static uec_info_t eth3_uec_info = {
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.tx_bd_ring_len = 16,
.rx_bd_ring_len = 16,
- .phy_address = CFG_UEC3_PHY_ADDR,
- .enet_interface = CFG_UEC3_INTERFACE_MODE,
+ .phy_address = CONFIG_SYS_UEC3_PHY_ADDR,
+ .enet_interface = CONFIG_SYS_UEC3_INTERFACE_MODE,
};
#endif
#ifdef CONFIG_UEC_ETH4
static uec_info_t eth4_uec_info = {
.uf_info = {
- .ucc_num = CFG_UEC4_UCC_NUM,
- .rx_clock = CFG_UEC4_RX_CLK,
- .tx_clock = CFG_UEC4_TX_CLK,
- .eth_type = CFG_UEC4_ETH_TYPE,
+ .ucc_num = CONFIG_SYS_UEC4_UCC_NUM,
+ .rx_clock = CONFIG_SYS_UEC4_RX_CLK,
+ .tx_clock = CONFIG_SYS_UEC4_TX_CLK,
+ .eth_type = CONFIG_SYS_UEC4_ETH_TYPE,
},
-#if (CFG_UEC4_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC4_ETH_TYPE == FAST_ETH)
.num_threads_tx = UEC_NUM_OF_THREADS_1,
.num_threads_rx = UEC_NUM_OF_THREADS_1,
#else
@@ -119,19 +119,19 @@ static uec_info_t eth4_uec_info = {
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.tx_bd_ring_len = 16,
.rx_bd_ring_len = 16,
- .phy_address = CFG_UEC4_PHY_ADDR,
- .enet_interface = CFG_UEC4_INTERFACE_MODE,
+ .phy_address = CONFIG_SYS_UEC4_PHY_ADDR,
+ .enet_interface = CONFIG_SYS_UEC4_INTERFACE_MODE,
};
#endif
#ifdef CONFIG_UEC_ETH5
static uec_info_t eth5_uec_info = {
.uf_info = {
- .ucc_num = CFG_UEC5_UCC_NUM,
- .rx_clock = CFG_UEC5_RX_CLK,
- .tx_clock = CFG_UEC5_TX_CLK,
- .eth_type = CFG_UEC5_ETH_TYPE,
+ .ucc_num = CONFIG_SYS_UEC5_UCC_NUM,
+ .rx_clock = CONFIG_SYS_UEC5_RX_CLK,
+ .tx_clock = CONFIG_SYS_UEC5_TX_CLK,
+ .eth_type = CONFIG_SYS_UEC5_ETH_TYPE,
},
-#if (CFG_UEC5_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC5_ETH_TYPE == FAST_ETH)
.num_threads_tx = UEC_NUM_OF_THREADS_1,
.num_threads_rx = UEC_NUM_OF_THREADS_1,
#else
@@ -142,19 +142,19 @@ static uec_info_t eth5_uec_info = {
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.tx_bd_ring_len = 16,
.rx_bd_ring_len = 16,
- .phy_address = CFG_UEC5_PHY_ADDR,
- .enet_interface = CFG_UEC5_INTERFACE_MODE,
+ .phy_address = CONFIG_SYS_UEC5_PHY_ADDR,
+ .enet_interface = CONFIG_SYS_UEC5_INTERFACE_MODE,
};
#endif
#ifdef CONFIG_UEC_ETH6
static uec_info_t eth6_uec_info = {
.uf_info = {
- .ucc_num = CFG_UEC6_UCC_NUM,
- .rx_clock = CFG_UEC6_RX_CLK,
- .tx_clock = CFG_UEC6_TX_CLK,
- .eth_type = CFG_UEC6_ETH_TYPE,
+ .ucc_num = CONFIG_SYS_UEC6_UCC_NUM,
+ .rx_clock = CONFIG_SYS_UEC6_RX_CLK,
+ .tx_clock = CONFIG_SYS_UEC6_TX_CLK,
+ .eth_type = CONFIG_SYS_UEC6_ETH_TYPE,
},
-#if (CFG_UEC6_ETH_TYPE == FAST_ETH)
+#if (CONFIG_SYS_UEC6_ETH_TYPE == FAST_ETH)
.num_threads_tx = UEC_NUM_OF_THREADS_1,
.num_threads_rx = UEC_NUM_OF_THREADS_1,
#else
@@ -165,8 +165,8 @@ static uec_info_t eth6_uec_info = {
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
.tx_bd_ring_len = 16,
.rx_bd_ring_len = 16,
- .phy_address = CFG_UEC6_PHY_ADDR,
- .enet_interface = CFG_UEC6_INTERFACE_MODE,
+ .phy_address = CONFIG_SYS_UEC6_PHY_ADDR,
+ .enet_interface = CONFIG_SYS_UEC6_INTERFACE_MODE,
};
#endif
diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c
index 03c4089267..75f88a9a52 100644
--- a/drivers/rtc/ds1306.c
+++ b/drivers/rtc/ds1306.c
@@ -86,7 +86,7 @@ static void init_spi (void);
/* read clock time from DS1306 and return it in *tmp */
int rtc_get (struct rtc_time *tmp)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
unsigned char spi_byte; /* Data Byte */
init_spi (); /* set port B for software SPI */
@@ -143,7 +143,7 @@ int rtc_get (struct rtc_time *tmp)
/* set clock time in DS1306 RTC and in MPC8xx RTC */
int rtc_set (struct rtc_time *tmp)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
init_spi (); /* set port B for software SPI */
@@ -218,7 +218,7 @@ int rtc_set (struct rtc_time *tmp)
/* Initialize Port B for software SPI */
static void init_spi (void)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
/* Force output pins to begin at logic 0 */
immap->im_cpm.cp_pbdat &= ~(PB_SPI_CE | PB_SPIMOSI | PB_SPISCK);
@@ -235,7 +235,7 @@ static void init_spi (void)
/* NOTE: soft_spi_send() assumes that the I/O lines are configured already */
static void soft_spi_send (unsigned char n)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
unsigned char bitpos; /* bit position to receive */
unsigned char i; /* Loop Control */
@@ -264,7 +264,7 @@ static void soft_spi_send (unsigned char n)
/* NOTE: soft_spi_read() assumes that the I/O lines are configured already */
static unsigned char soft_spi_read (void)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
unsigned char spi_byte = 0; /* Return value, assume success */
unsigned char bitpos; /* bit position to receive */
@@ -314,7 +314,7 @@ int rtc_get (struct rtc_time *tmp)
* step just once.
*/
if (!slave) {
- slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+ slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
SPI_MODE_3 | SPI_CS_HIGH);
if (!slave)
return;
@@ -377,7 +377,7 @@ int rtc_set (struct rtc_time *tmp)
{
/* Assuming Vcc = 2.0V (lowest speed) */
if (!slave) {
- slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+ slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
SPI_MODE_3 | SPI_CS_HIGH);
if (!slave)
return;
@@ -408,7 +408,7 @@ void rtc_reset (void)
{
/* Assuming Vcc = 2.0V (lowest speed) */
if (!slave) {
- slave = spi_setup_slave(0, CFG_SPI_RTC_DEVID, 600000,
+ slave = spi_setup_slave(0, CONFIG_SYS_SPI_RTC_DEVID, 600000,
SPI_MODE_3 | SPI_CS_HIGH);
if (!slave)
return;
diff --git a/drivers/rtc/ds1307.c b/drivers/rtc/ds1307.c
index afc4b782da..0650d915ab 100644
--- a/drivers/rtc/ds1307.c
+++ b/drivers/rtc/ds1307.c
@@ -47,11 +47,11 @@
#endif
/*---------------------------------------------------------------------*/
-#ifndef CFG_I2C_RTC_ADDR
-# define CFG_I2C_RTC_ADDR 0x68
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR 0x68
#endif
-#if defined(CONFIG_RTC_DS1307) && (CFG_I2C_SPEED > 100000)
+#if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000)
# error The DS1307 is specified only up to 100kHz!
#endif
@@ -187,13 +187,13 @@ void rtc_reset (void)
static
uchar rtc_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/ds1337.c b/drivers/rtc/ds1337.c
index 509f81ff75..58e3966ec7 100644
--- a/drivers/rtc/ds1337.c
+++ b/drivers/rtc/ds1337.c
@@ -160,10 +160,10 @@ int rtc_set (struct rtc_time *tmp)
* SQW/INTB* pin and program it for 32,768 Hz output. Note that
* according to the datasheet, turning on the square wave output
* increases the current drain on the backup battery from about
- * 600 nA to 2uA. Define CFG_RTC_DS1337_NOOSC if you wish to turn
+ * 600 nA to 2uA. Define CONFIG_SYS_RTC_DS1337_NOOSC if you wish to turn
* off the OSC output.
*/
-#ifdef CFG_RTC_DS1337_NOOSC
+#ifdef CONFIG_SYS_RTC_DS1337_NOOSC
#define RTC_DS1337_RESET_VAL \
(RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
#else
@@ -182,13 +182,13 @@ void rtc_reset (void)
static
uchar rtc_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/ds1374.c b/drivers/rtc/ds1374.c
index 79a3d73060..d61a2289f9 100644
--- a/drivers/rtc/ds1374.c
+++ b/drivers/rtc/ds1374.c
@@ -48,11 +48,11 @@
#endif
/*---------------------------------------------------------------------*/
-#ifndef CFG_I2C_RTC_ADDR
-# define CFG_I2C_RTC_ADDR 0x68
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR 0x68
#endif
-#if defined(CONFIG_RTC_DS1374) && (CFG_I2C_SPEED > 400000)
+#if defined(CONFIG_RTC_DS1374) && (CONFIG_SYS_I2C_SPEED > 400000)
# error The DS1374 is specified up to 400kHz in fast mode!
#endif
@@ -239,22 +239,22 @@ void rtc_reset (void){
*/
static uchar rtc_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val, boolean_t set)
{
if (set == TRUE) {
- val |= i2c_reg_read (CFG_I2C_RTC_ADDR, reg);
- i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+ val |= i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg);
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
} else {
- val = i2c_reg_read (CFG_I2C_RTC_ADDR, reg) & ~val;
- i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+ val = i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg) & ~val;
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
}
static void rtc_write_raw (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
#endif
diff --git a/drivers/rtc/ds1556.c b/drivers/rtc/ds1556.c
index 7574626173..763d22a03b 100644
--- a/drivers/rtc/ds1556.c
+++ b/drivers/rtc/ds1556.c
@@ -43,7 +43,7 @@ static void rtc_write( unsigned int addr, uchar val);
static uchar bin2bcd (unsigned int n);
static unsigned bcd2bin(uchar c);
-#define RTC_BASE ( CFG_NVRAM_SIZE + CFG_NVRAM_BASE_ADDR )
+#define RTC_BASE ( CONFIG_SYS_NVRAM_SIZE + CONFIG_SYS_NVRAM_BASE_ADDR )
#define RTC_YEAR ( RTC_BASE + 0xf )
#define RTC_MONTH ( RTC_BASE + 0xe )
diff --git a/drivers/rtc/ds164x.c b/drivers/rtc/ds164x.c
index 00494b38d1..1e96679de2 100644
--- a/drivers/rtc/ds164x.c
+++ b/drivers/rtc/ds164x.c
@@ -49,7 +49,7 @@ static unsigned bcd2bin(uchar c);
/*
* DS164x registers layout
*/
-#define RTC_BASE ( CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE )
+#define RTC_BASE ( CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE )
#define RTC_YEAR ( RTC_BASE + 0x07 )
#define RTC_MONTH ( RTC_BASE + 0x06 )
diff --git a/drivers/rtc/ds174x.c b/drivers/rtc/ds174x.c
index 43e6ab763b..738d1185c2 100644
--- a/drivers/rtc/ds174x.c
+++ b/drivers/rtc/ds174x.c
@@ -40,7 +40,7 @@ static void rtc_write( unsigned int addr, uchar val);
static uchar bin2bcd (unsigned int n);
static unsigned bcd2bin(uchar c);
-#define RTC_BASE ( CFG_NVRAM_SIZE + CFG_NVRAM_BASE_ADDR )
+#define RTC_BASE ( CONFIG_SYS_NVRAM_SIZE + CONFIG_SYS_NVRAM_BASE_ADDR )
#define RTC_YEAR ( RTC_BASE + 7 )
#define RTC_MONTH ( RTC_BASE + 6 )
diff --git a/drivers/rtc/ds3231.c b/drivers/rtc/ds3231.c
index da8a3e63f0..ef033588a9 100644
--- a/drivers/rtc/ds3231.c
+++ b/drivers/rtc/ds3231.c
@@ -177,13 +177,13 @@ void rtc_reset (void)
static
uchar rtc_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/isl1208.c b/drivers/rtc/isl1208.c
index 87f06cc1f7..71f63d5fa0 100644
--- a/drivers/rtc/isl1208.c
+++ b/drivers/rtc/isl1208.c
@@ -153,12 +153,12 @@ void rtc_reset (void)
static uchar rtc_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/m41t11.c b/drivers/rtc/m41t11.c
index 0a9b12ec2a..3a77c1b638 100644
--- a/drivers/rtc/m41t11.c
+++ b/drivers/rtc/m41t11.c
@@ -35,15 +35,15 @@
is what should be done.
#define CONFIG_RTC_M41T11 1
-#define CFG_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#if 0
-#define CFG_M41T11_EXT_CENTURY_DATA
+#define CONFIG_SYS_M41T11_EXT_CENTURY_DATA
#else
-#define CFG_M41T11_BASE_YEAR 2000
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
#endif
*/
-#if defined(CFG_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
+#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
static unsigned bcd2bin (uchar n)
{
@@ -75,7 +75,7 @@ static unsigned char bin2bcd (unsigned int n)
#define RTC_CONTROL_ADDR 0x7
-#ifndef CFG_M41T11_EXT_CENTURY_DATA
+#ifndef CONFIG_SYS_M41T11_EXT_CENTURY_DATA
#define REG_CNT (RTC_REG_CNT+1)
@@ -83,8 +83,8 @@ static unsigned char bin2bcd (unsigned int n)
you only get 00-99 for the year we will asume you
want from the year 2000 if you don't set the config
*/
-#ifndef CFG_M41T11_BASE_YEAR
-#define CFG_M41T11_BASE_YEAR 2000
+#ifndef CONFIG_SYS_M41T11_BASE_YEAR
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
#endif
#else
@@ -101,7 +101,7 @@ int rtc_get (struct rtc_time *tmp)
int rel = 0;
uchar data[RTC_REG_CNT];
- i2c_read(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
+ i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
if( data[RTC_SEC_ADDR] & 0x80 ){
printf( "m41t11 RTC Clock stopped!!!\n" );
@@ -112,14 +112,14 @@ int rtc_get (struct rtc_time *tmp)
tmp->tm_hour = bcd2bin (data[RTC_HOUR_ADDR] & 0x3F);
tmp->tm_mday = bcd2bin (data[RTC_DATE_ADDR] & 0x3F);
tmp->tm_mon = bcd2bin (data[RTC_MONTH_ADDR]& 0x1F);
-#ifndef CFG_M41T11_EXT_CENTURY_DATA
- tmp->tm_year = CFG_M41T11_BASE_YEAR
+#ifndef CONFIG_SYS_M41T11_EXT_CENTURY_DATA
+ tmp->tm_year = CONFIG_SYS_M41T11_BASE_YEAR
+ bcd2bin(data[RTC_YEARS_ADDR])
+ ((data[RTC_HOUR_ADDR]&0x40) ? 100 : 0);
#else
{
unsigned char cent;
- i2c_read(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
+ i2c_read(CONFIG_SYS_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
if( !(data[RTC_HOUR_ADDR] & 0x80) ){
printf( "m41t11 RTC: cann't keep track of years without CEB set\n" );
rel = -1;
@@ -127,7 +127,7 @@ int rtc_get (struct rtc_time *tmp)
if( (cent & 0x1) != ((data[RTC_HOUR_ADDR]&0x40)>>7) ){
/*century flip store off new year*/
cent += 1;
- i2c_write(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
+ i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
}
tmp->tm_year =((int)cent*100)+bcd2bin(data[RTC_YEARS_ADDR]);
}
@@ -161,21 +161,21 @@ int rtc_set (struct rtc_time *tmp)
data[RTC_HOUR_ADDR] |= 0x80;/*we will always use CEB*/
data[RTC_YEARS_ADDR] = bin2bcd(tmp->tm_year%100);/*same thing either way*/
-#ifndef CFG_M41T11_EXT_CENTURY_DATA
- if( ((tmp->tm_year - CFG_M41T11_BASE_YEAR) > 200) ||
- (tmp->tm_year < CFG_M41T11_BASE_YEAR) ){
+#ifndef CONFIG_SYS_M41T11_EXT_CENTURY_DATA
+ if( ((tmp->tm_year - CONFIG_SYS_M41T11_BASE_YEAR) > 200) ||
+ (tmp->tm_year < CONFIG_SYS_M41T11_BASE_YEAR) ){
printf( "m41t11 RTC setting year out of range!!need recompile\n" );
}
- data[RTC_HOUR_ADDR] |= (tmp->tm_year - CFG_M41T11_BASE_YEAR) > 100 ? 0x40 : 0;
+ data[RTC_HOUR_ADDR] |= (tmp->tm_year - CONFIG_SYS_M41T11_BASE_YEAR) > 100 ? 0x40 : 0;
#else
{
unsigned char cent;
cent = tmp->tm_year ? tmp->tm_year / 100 : 0;
data[RTC_HOUR_ADDR] |= (cent & 0x1) ? 0x40 : 0;
- i2c_write(CFG_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
+ i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T11_YEAR_DATA, 1, &cent, M41T11_YEAR_SIZE);
}
#endif
- i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
+ i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, data, RTC_REG_CNT);
return 0;
}
@@ -184,13 +184,13 @@ void rtc_reset (void)
{
unsigned char val;
/* clear all control & status registers */
- i2c_read(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, 1);
+ i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, 1);
val = val & 0x7F;/*make sure we are running*/
- i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, RTC_REG_CNT);
+ i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC_ADDR, 1, &val, RTC_REG_CNT);
- i2c_read(CFG_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
+ i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
val = val & 0x3F;/*turn off freq test keep calibration*/
- i2c_write(CFG_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
+ i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_CONTROL_ADDR, 1, &val, 1);
}
int rtc_store(int addr, unsigned char* data, int size)
@@ -198,12 +198,12 @@ int rtc_store(int addr, unsigned char* data, int size)
/*don't let things wrap onto the time on a write*/
if( (addr+size) >= M41T11_STORAGE_SZ )
return 1;
- return i2c_write( CFG_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
+ return i2c_write( CONFIG_SYS_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
}
int rtc_recall(int addr, unsigned char* data, int size)
{
- return i2c_read( CFG_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
+ return i2c_read( CONFIG_SYS_I2C_RTC_ADDR, REG_CNT+addr, 1, data, size );
}
#endif
diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c
index 71bfc32676..e34a5f4783 100644
--- a/drivers/rtc/m41t60.c
+++ b/drivers/rtc/m41t60.c
@@ -34,7 +34,7 @@
#include <rtc.h>
#include <i2c.h>
-#if defined(CFG_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
+#if defined(CONFIG_SYS_I2C_RTC_ADDR) && defined(CONFIG_CMD_DATE)
static unsigned bcd2bin(uchar n)
{
@@ -85,7 +85,7 @@ static void rtc_dump(char const *const label)
{
uchar data[8];
- if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+ if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
printf("I2C read failed in rtc_dump()\n");
return;
}
@@ -114,7 +114,7 @@ static uchar *rtc_validate(void)
uchar min, date, month, years;
rtc_dump("begin validate");
- if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+ if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
printf("I2C read failed in rtc_validate()\n");
return 0;
}
@@ -125,7 +125,7 @@ static uchar *rtc_validate(void)
if (0x00 != (data[RTC_CTRL] & 0x80)) {
printf("M41T60 RTC clock lost power.\n");
data[RTC_SEC] = 0x80;
- if (i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC, 1, data, 1)) {
+ if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_SEC, 1, data, 1)) {
printf("I2C write failed in rtc_validate()\n");
return 0;
}
@@ -161,7 +161,7 @@ static uchar *rtc_validate(void)
data[RTC_YEAR] = 0x00;
data[RTC_CTRL] &= 0x7F; /* reset OUT bit */
- if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
+ if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) {
printf("I2C write failed in rtc_validate()\n");
return 0;
}
@@ -212,7 +212,7 @@ int rtc_set(struct rtc_time *tmp)
data[RTC_YEAR] = bin2bcd(tmp->tm_year % 100);
data[RTC_MONTH] |= year2cb(tmp->tm_year) << 6;
data[RTC_DAY] = bin2bcd(tmp->tm_wday + 1) & 0x07;
- if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, RTC_REG_CNT)) {
+ if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, data, RTC_REG_CNT)) {
printf("I2C write failed in rtc_set()\n");
return -1;
}
@@ -255,10 +255,10 @@ void rtc_reset(void)
* Turn off frequency test.
*/
data[RTC_CTRL] &= 0xBF;
- if (i2c_write(CFG_I2C_RTC_ADDR, RTC_CTRL, 1, data + RTC_CTRL, 1)) {
+ if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_CTRL, 1, data + RTC_CTRL, 1)) {
printf("I2C write failed in rtc_reset()\n");
return;
}
rtc_dump("end reset");
}
-#endif /* CONFIG_RTC_M41T60 && CFG_I2C_RTC_ADDR && CONFIG_CMD_DATE */
+#endif /* CONFIG_RTC_M41T60 && CONFIG_SYS_I2C_RTC_ADDR && CONFIG_CMD_DATE */
diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c
index 9b7c84a084..cfe84f926b 100644
--- a/drivers/rtc/m41t62.c
+++ b/drivers/rtc/m41t62.c
@@ -68,7 +68,7 @@ int rtc_get(struct rtc_time *tm)
{
u8 buf[M41T62_DATETIME_REG_SIZE];
- i2c_read(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
+ i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
@@ -104,7 +104,7 @@ int rtc_set(struct rtc_time *tm)
tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
- i2c_read(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
+ i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
/* Merge time-data and register flags into buf[0..7] */
buf[M41T62_REG_SSEC] = 0;
@@ -123,7 +123,7 @@ int rtc_set(struct rtc_time *tm)
/* assume 20YY not 19YY */
buf[M41T62_REG_YEAR] = BIN2BCD(tm->tm_year % 100);
- if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE)) {
+ if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE)) {
printf("I2C write failed in %s()\n", __func__);
return -1;
}
diff --git a/drivers/rtc/m48t35ax.c b/drivers/rtc/m48t35ax.c
index e19b81b16b..1482edd607 100644
--- a/drivers/rtc/m48t35ax.c
+++ b/drivers/rtc/m48t35ax.c
@@ -147,14 +147,14 @@ static uchar rtc_read (uchar reg)
{
uchar val;
val = *(unsigned char *)
- ((CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - 8) + reg);
+ ((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg);
return val;
}
static void rtc_write (uchar reg, uchar val)
{
*(unsigned char *)
- ((CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - 8) + reg) = val;
+ ((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg) = val;
}
static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/max6900.c b/drivers/rtc/max6900.c
index 758d7b79d9..7c99c5e5b1 100644
--- a/drivers/rtc/max6900.c
+++ b/drivers/rtc/max6900.c
@@ -34,20 +34,20 @@
#if defined(CONFIG_CMD_DATE)
-#ifndef CFG_I2C_RTC_ADDR
-#define CFG_I2C_RTC_ADDR 0x50
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+#define CONFIG_SYS_I2C_RTC_ADDR 0x50
#endif
/* ------------------------------------------------------------------------- */
static uchar rtc_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
udelay(2500);
}
diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index 1225454fcc..38484ce26c 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -38,7 +38,7 @@ static void rtc_write (uchar reg, uchar val);
static uchar bin2bcd (unsigned int n);
static unsigned bcd2bin(uchar c);
-#define RTC_PORT_MC146818 CFG_ISA_IO_BASE_ADDRESS + 0x70
+#define RTC_PORT_MC146818 CONFIG_SYS_ISA_IO_BASE_ADDRESS + 0x70
#define RTC_SECONDS 0x00
#define RTC_SECONDS_ALARM 0x01
#define RTC_MINUTES 0x02
@@ -141,18 +141,18 @@ void rtc_reset (void)
/* ------------------------------------------------------------------------- */
-#ifdef CFG_RTC_REG_BASE_ADDR
+#ifdef CONFIG_SYS_RTC_REG_BASE_ADDR
/*
* use direct memory access
*/
static uchar rtc_read (uchar reg)
{
- return(in8(CFG_RTC_REG_BASE_ADDR+reg));
+ return(in8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg));
}
static void rtc_write (uchar reg, uchar val)
{
- out8(CFG_RTC_REG_BASE_ADDR+reg, val);
+ out8(CONFIG_SYS_RTC_REG_BASE_ADDR+reg, val);
}
#else
static uchar rtc_read (uchar reg)
diff --git a/drivers/rtc/mcfrtc.c b/drivers/rtc/mcfrtc.c
index c2af197987..979c466514 100644
--- a/drivers/rtc/mcfrtc.c
+++ b/drivers/rtc/mcfrtc.c
@@ -32,7 +32,7 @@
#undef RTC_DEBUG
-#ifndef CFG_MCFRTC_BASE
+#ifndef CONFIG_SYS_MCFRTC_BASE
#error RTC_BASE is not defined!
#endif
@@ -41,7 +41,7 @@
int rtc_get(struct rtc_time *tmp)
{
- volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
+ volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
int rtc_days, rtc_hrs, rtc_mins;
int tim;
@@ -70,7 +70,7 @@ int rtc_get(struct rtc_time *tmp)
int rtc_set(struct rtc_time *tmp)
{
- volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
+ volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
static int month_days[12] = {
31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
@@ -112,7 +112,7 @@ int rtc_set(struct rtc_time *tmp)
void rtc_reset(void)
{
- volatile rtc_t *rtc = (rtc_t *) (CFG_MCFRTC_BASE);
+ volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
if ((rtc->cr & RTC_CR_EN) == 0) {
printf("real-time-clock was stopped. Now starting...\n");
diff --git a/drivers/rtc/mpc5xxx.c b/drivers/rtc/mpc5xxx.c
index 6231b9b699..ec0b0ef68f 100644
--- a/drivers/rtc/mpc5xxx.c
+++ b/drivers/rtc/mpc5xxx.c
@@ -57,7 +57,7 @@ typedef struct rtc5200 {
*****************************************************************************/
int rtc_get (struct rtc_time *tmp)
{
- RTC5200 *rtc = (RTC5200 *) (CFG_MBAR+0x800);
+ RTC5200 *rtc = (RTC5200 *) (CONFIG_SYS_MBAR+0x800);
ulong time, date, time2;
/* read twice to avoid getting a funny time when the second is just changing */
@@ -90,7 +90,7 @@ int rtc_get (struct rtc_time *tmp)
*****************************************************************************/
int rtc_set (struct rtc_time *tmp)
{
- RTC5200 *rtc = (RTC5200 *) (CFG_MBAR+0x800);
+ RTC5200 *rtc = (RTC5200 *) (CONFIG_SYS_MBAR+0x800);
ulong time, date, year;
debug ( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
diff --git a/drivers/rtc/mpc8xx.c b/drivers/rtc/mpc8xx.c
index 2bbc5d3d28..1c24e59e42 100644
--- a/drivers/rtc/mpc8xx.c
+++ b/drivers/rtc/mpc8xx.c
@@ -37,7 +37,7 @@
int rtc_get (struct rtc_time *tmp)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
ulong tim;
tim = immr->im_sit.sit_rtc;
@@ -53,7 +53,7 @@ int rtc_get (struct rtc_time *tmp)
int rtc_set (struct rtc_time *tmp)
{
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
ulong tim;
debug ( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
diff --git a/drivers/rtc/pcf8563.c b/drivers/rtc/pcf8563.c
index 2fe1e37dc8..cd9fb65c3a 100644
--- a/drivers/rtc/pcf8563.c
+++ b/drivers/rtc/pcf8563.c
@@ -129,12 +129,12 @@ void rtc_reset (void)
static uchar rtc_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}
static unsigned bcd2bin (uchar n)
diff --git a/drivers/rtc/pl031.c b/drivers/rtc/pl031.c
index 6c1e9bdec0..8b2b174aea 100644
--- a/drivers/rtc/pl031.c
+++ b/drivers/rtc/pl031.c
@@ -29,8 +29,8 @@
#if defined(CONFIG_CMD_DATE)
-#ifndef CFG_RTC_PL031_BASE
-#error CFG_RTC_PL031_BASE is not defined!
+#ifndef CONFIG_SYS_RTC_PL031_BASE
+#error CONFIG_SYS_RTC_PL031_BASE is not defined!
#endif
/*
@@ -48,9 +48,9 @@
#define RTC_CR_START (1 << 0)
#define RTC_WRITE_REG(addr, val) \
- (*(volatile unsigned int *)(CFG_RTC_PL031_BASE + (addr)) = (val))
+ (*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)) = (val))
#define RTC_READ_REG(addr) \
- (*(volatile unsigned int *)(CFG_RTC_PL031_BASE + (addr)))
+ (*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)))
static int pl031_initted = 0;
diff --git a/drivers/rtc/rs5c372.c b/drivers/rtc/rs5c372.c
index 82dd9694e6..d6cd7c825d 100644
--- a/drivers/rtc/rs5c372.c
+++ b/drivers/rtc/rs5c372.c
@@ -50,8 +50,8 @@ static unsigned int rtc_debug = DEBUG;
#define rtc_debug 0 /* gcc will remove all the debug code for us */
#endif
-#ifndef CFG_I2C_RTC_ADDR
-#define CFG_I2C_RTC_ADDR 0x32
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+#define CONFIG_SYS_I2C_RTC_ADDR 0x32
#endif
#define RS5C372_RAM_SIZE 0x10
@@ -77,7 +77,7 @@ rs5c372_readram(unsigned char *buf, int len)
{
int ret;
- ret = i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, len);
+ ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, len);
if (ret != 0) {
printf("%s: failed to read\n", __FUNCTION__);
return ret;
@@ -117,7 +117,7 @@ rs5c372_enable(void)
buf[14] = 0; /* reg. 13 */
buf[15] = 0; /* reg. 14 */
buf[16] = USE_24HOUR_MODE; /* reg. 15 */
- ret = i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1);
+ ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1);
if (ret != 0) {
printf("%s: failed\n", __FUNCTION__);
return;
@@ -218,7 +218,7 @@ int rtc_set (struct rtc_time *tmp)
memset(buf, 0, sizeof(buf));
/* only read register 15 */
- ret = i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, 1);
+ ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 1);
if (ret == 0) {
/* need to save register 15 */
@@ -247,7 +247,7 @@ int rtc_set (struct rtc_time *tmp)
printf("WARNING: year should be between 1970 and 2069!\n");
buf[7] = bin2bcd(tmp->tm_year % 100);
- ret = i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, 8);
+ ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 8);
if (ret != 0) {
printf("rs5c372_set_datetime(), i2c_master_send() returned %d\n",ret);
return -1;
diff --git a/drivers/rtc/rx8025.c b/drivers/rtc/rx8025.c
index 9f4ce2f9ad..da87394a08 100644
--- a/drivers/rtc/rx8025.c
+++ b/drivers/rtc/rx8025.c
@@ -42,8 +42,8 @@
#endif
/*---------------------------------------------------------------------*/
-#ifndef CFG_I2C_RTC_ADDR
-# define CFG_I2C_RTC_ADDR 0x32
+#ifndef CONFIG_SYS_I2C_RTC_ADDR
+# define CONFIG_SYS_I2C_RTC_ADDR 0x32
#endif
/*
@@ -102,7 +102,7 @@ int rtc_get (struct rtc_time *tmp)
uchar sec, min, hour, mday, wday, mon, year, ctl2;
uchar buf[16];
- if (i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, 16))
+ if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 16))
printf("Error reading from RTC\n");
sec = rtc_read(RTC_SEC_REG_ADDR);
@@ -189,7 +189,7 @@ void rtc_reset (void)
uchar buf[16];
uchar ctl2;
- if (i2c_read(CFG_I2C_RTC_ADDR, 0, 0, buf, 16))
+ if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 16))
printf("Error reading from RTC\n");
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
@@ -221,7 +221,7 @@ static void rtc_write (uchar reg, uchar val)
uchar buf[2];
buf[0] = reg << 4;
buf[1] = val;
- if (i2c_write(CFG_I2C_RTC_ADDR, 0, 0, buf, 2) != 0)
+ if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 2) != 0)
printf("Error writing to RTC\n");
}
diff --git a/drivers/rtc/x1205.c b/drivers/rtc/x1205.c
index 7a3b514915..56115b032a 100644
--- a/drivers/rtc/x1205.c
+++ b/drivers/rtc/x1205.c
@@ -96,7 +96,7 @@
static void rtc_write(int reg, u8 val)
{
- i2c_write(CFG_I2C_RTC_ADDR, reg, 2, &val, 1);
+ i2c_write(CONFIG_SYS_I2C_RTC_ADDR, reg, 2, &val, 1);
}
/*
@@ -108,7 +108,7 @@ int rtc_get(struct rtc_time *tm)
{
u8 buf[8];
- i2c_read(CFG_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
+ i2c_read(CONFIG_SYS_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index a1fcd057a4..e04fc298d9 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -41,7 +41,7 @@ int serial_init(void)
volatile uart_t *uart;
u32 counter;
- uart = (volatile uart_t *)(CFG_UART_BASE);
+ uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
uart_port_conf();
@@ -76,7 +76,7 @@ int serial_init(void)
void serial_putc(const char c)
{
- volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+ volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
if (c == '\n')
serial_putc('\r');
@@ -96,7 +96,7 @@ void serial_puts(const char *s)
int serial_getc(void)
{
- volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+ volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
/* Wait for a character to arrive. */
while (!(uart->usr & UART_USR_RXRDY)) ;
@@ -105,14 +105,14 @@ int serial_getc(void)
int serial_tstc(void)
{
- volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+ volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
return (uart->usr & UART_USR_RXRDY);
}
void serial_setbrg(void)
{
- volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE);
+ volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
u32 counter;
counter = ((gd->bus_clk / gd->baudrate)) >> 5;
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 6b3f60eb57..93c2243d7d 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -1,12 +1,12 @@
/*
* COM1 NS16550 support
* originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
*/
#include <config.h>
-#ifdef CFG_NS16550
+#ifdef CONFIG_SYS_NS16550
#include <ns16550.h>
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index b361eef9a4..bce75489d2 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -23,7 +23,7 @@
#include <common.h>
-#ifdef CFG_NS16550_SERIAL
+#ifdef CONFIG_SYS_NS16550_SERIAL
#include <ns16550.h>
#ifdef CONFIG_NS87308
@@ -48,13 +48,13 @@ DECLARE_GLOBAL_DATA_PTR;
#error "Invalid console index value."
#endif
-#if CONFIG_CONS_INDEX == 1 && !defined(CFG_NS16550_COM1)
+#if CONFIG_CONS_INDEX == 1 && !defined(CONFIG_SYS_NS16550_COM1)
#error "Console port 1 defined but not configured."
-#elif CONFIG_CONS_INDEX == 2 && !defined(CFG_NS16550_COM2)
+#elif CONFIG_CONS_INDEX == 2 && !defined(CONFIG_SYS_NS16550_COM2)
#error "Console port 2 defined but not configured."
-#elif CONFIG_CONS_INDEX == 3 && !defined(CFG_NS16550_COM3)
+#elif CONFIG_CONS_INDEX == 3 && !defined(CONFIG_SYS_NS16550_COM3)
#error "Console port 3 defined but not configured."
-#elif CONFIG_CONS_INDEX == 4 && !defined(CFG_NS16550_COM4)
+#elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4)
#error "Console port 4 defined but not configured."
#endif
@@ -62,23 +62,23 @@ DECLARE_GLOBAL_DATA_PTR;
* the array is 0 based.
*/
static NS16550_t serial_ports[4] = {
-#ifdef CFG_NS16550_COM1
- (NS16550_t)CFG_NS16550_COM1,
+#ifdef CONFIG_SYS_NS16550_COM1
+ (NS16550_t)CONFIG_SYS_NS16550_COM1,
#else
NULL,
#endif
-#ifdef CFG_NS16550_COM2
- (NS16550_t)CFG_NS16550_COM2,
+#ifdef CONFIG_SYS_NS16550_COM2
+ (NS16550_t)CONFIG_SYS_NS16550_COM2,
#else
NULL,
#endif
-#ifdef CFG_NS16550_COM3
- (NS16550_t)CFG_NS16550_COM3,
+#ifdef CONFIG_SYS_NS16550_COM3
+ (NS16550_t)CONFIG_SYS_NS16550_COM3,
#else
NULL,
#endif
-#ifdef CFG_NS16550_COM4
- (NS16550_t)CFG_NS16550_COM4
+#ifdef CONFIG_SYS_NS16550_COM4
+ (NS16550_t)CONFIG_SYS_NS16550_COM4
#else
NULL
#endif
@@ -126,7 +126,7 @@ static int calc_divisor (NS16550_t port)
{
#ifdef CONFIG_OMAP1510
/* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
+ if ((CONFIG_SYS_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
port->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
return (1); /* return 1 for base divisor */
}
@@ -134,7 +134,7 @@ static int calc_divisor (NS16550_t port)
#endif
#ifdef CONFIG_OMAP1610
/* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
+ if ((CONFIG_SYS_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
return (26); /* return 26 for base divisor */
}
#endif
@@ -146,11 +146,11 @@ static int calc_divisor (NS16550_t port)
#endif
/* Compute divisor value. Normally, we should simply return:
- * CFG_NS16550_CLK) / MODE_X_DIV / gd->baudrate
+ * CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
* but we need to round that value by adding 0.5.
* Rounding is especially important at high baud rates.
*/
- return (CFG_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
+ return (CONFIG_SYS_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) /
(MODE_X_DIV * gd->baudrate);
}
@@ -163,19 +163,19 @@ int serial_init (void)
initialise_ns87308();
#endif
-#ifdef CFG_NS16550_COM1
+#ifdef CONFIG_SYS_NS16550_COM1
clock_divisor = calc_divisor(serial_ports[0]);
NS16550_init(serial_ports[0], clock_divisor);
#endif
-#ifdef CFG_NS16550_COM2
+#ifdef CONFIG_SYS_NS16550_COM2
clock_divisor = calc_divisor(serial_ports[1]);
NS16550_init(serial_ports[1], clock_divisor);
#endif
-#ifdef CFG_NS16550_COM3
+#ifdef CONFIG_SYS_NS16550_COM3
clock_divisor = calc_divisor(serial_ports[2]);
NS16550_init(serial_ports[2], clock_divisor);
#endif
-#ifdef CFG_NS16550_COM4
+#ifdef CONFIG_SYS_NS16550_COM4
clock_divisor = calc_divisor(serial_ports[3]);
NS16550_init(serial_ports[3], clock_divisor);
#endif
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 9eaf9860b4..c4b36f06c0 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -67,7 +67,7 @@ void spi_free_slave(struct spi_slave *slave)
void spi_init(void)
{
- volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+ volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi;
/*
* SPI pins on the MPC83xx are not muxed, so all we do is initialize
@@ -94,7 +94,7 @@ void spi_release_bus(struct spi_slave *slave)
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags)
{
- volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+ volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi;
unsigned int tmpdout, tmpdin, event;
int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0);
int tm, isRead = 0;
diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c
index 25b589ad7c..13df8cb7de 100644
--- a/drivers/spi/soft_spi.c
+++ b/drivers/spi/soft_spi.c
@@ -59,7 +59,7 @@ static inline struct soft_spi_slave *to_soft_spi(struct spi_slave *slave)
void spi_init (void)
{
#ifdef SPI_INIT
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
SPI_INIT;
#endif
@@ -95,8 +95,8 @@ void spi_free_slave(struct spi_slave *slave)
int spi_claim_bus(struct spi_slave *slave)
{
-#ifdef CFG_IMMR
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#ifdef CONFIG_SYS_IMMR
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
#endif
struct soft_spi_slave *ss = to_soft_spi(slave);
@@ -132,8 +132,8 @@ void spi_release_bus(struct spi_slave *slave)
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
-#ifdef CFG_IMMR
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
+#ifdef CONFIG_SYS_IMMR
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
#endif
struct soft_spi_slave *ss = to_soft_spi(slave);
uchar tmpdin = 0;
diff --git a/drivers/usb/sl811_usb.c b/drivers/usb/sl811_usb.c
index 159cc25275..48f1ee95f5 100644
--- a/drivers/usb/sl811_usb.c
+++ b/drivers/usb/sl811_usb.c
@@ -111,7 +111,7 @@ static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
int usb_init_kup4x (void)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
int i;
unsigned char tmp;
@@ -265,7 +265,7 @@ static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *b
sl811_write(SL811_CTRL_A, ctrl);
while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
- if (5*CFG_HZ < get_timer(time_start)) {
+ if (5*CONFIG_SYS_HZ < get_timer(time_start)) {
printf("USB transmit timed out\n");
return -USB_ST_CRC_ERR;
}
diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c
index da11ecbc0f..c1aac3382e 100644
--- a/drivers/usb/usb_ohci.c
+++ b/drivers/usb/usb_ohci.c
@@ -73,7 +73,7 @@
defined(CONFIG_440EP) || \
defined(CONFIG_PCI_OHCI) || \
defined(CONFIG_MPC5200) || \
- defined(CFG_OHCI_USE_NPS)
+ defined(CONFIG_SYS_OHCI_USE_NPS)
# define OHCI_USE_NPS /* force NoPowerSwitching mode */
#endif
@@ -89,13 +89,13 @@
/*
* e.g. PCI controllers need this
*/
-#ifdef CFG_OHCI_SWAP_REG_ACCESS
+#ifdef CONFIG_SYS_OHCI_SWAP_REG_ACCESS
# define readl(a) __swap_32(*((volatile u32 *)(a)))
# define writel(a, b) (*((volatile u32 *)(b)) = __swap_32((volatile u32)a))
#else
# define readl(a) (*((volatile u32 *)(a)))
# define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#endif /* CFG_OHCI_SWAP_REG_ACCESS */
+#endif /* CONFIG_SYS_OHCI_SWAP_REG_ACCESS */
#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
@@ -129,13 +129,13 @@ static struct pci_device_id ehci_pci_ids[] = {
#define info(format, arg...) do {} while(0)
#endif
-#ifdef CFG_OHCI_BE_CONTROLLER
+#ifdef CONFIG_SYS_OHCI_BE_CONTROLLER
# define m16_swap(x) cpu_to_be16(x)
# define m32_swap(x) cpu_to_be32(x)
#else
# define m16_swap(x) cpu_to_le16(x)
# define m32_swap(x) cpu_to_le32(x)
-#endif /* CFG_OHCI_BE_CONTROLLER */
+#endif /* CONFIG_SYS_OHCI_BE_CONTROLLER */
/* global ohci_t */
static ohci_t gohci;
@@ -1819,13 +1819,13 @@ int usb_lowlevel_init(void)
pci_dev_t pdev;
#endif
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
/* cpu dependant init */
if(usb_cpu_init())
return -1;
#endif
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
/* board dependant init */
if(usb_board_init())
return -1;
@@ -1873,21 +1873,21 @@ int usb_lowlevel_init(void)
} else
return -1;
#else
- gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
+ gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE;
#endif
gohci.flags = 0;
- gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
+ gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME;
if (hc_reset (&gohci) < 0) {
hc_release_ohci (&gohci);
err ("can't reset usb-%s", gohci.slot_name);
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
/* board dependant cleanup */
usb_board_init_fail();
#endif
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
/* cpu dependant cleanup */
usb_cpu_init_fail();
#endif
@@ -1901,12 +1901,12 @@ int usb_lowlevel_init(void)
err ("can't start usb-%s", gohci.slot_name);
hc_release_ohci (&gohci);
/* Initialization failed */
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
/* board dependant cleanup */
usb_board_stop();
#endif
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
/* cpu dependant cleanup */
usb_cpu_stop();
#endif
@@ -1932,13 +1932,13 @@ int usb_lowlevel_stop(void)
/* call hc_release_ohci() here ? */
hc_reset (&gohci);
-#ifdef CFG_USB_OHCI_BOARD_INIT
+#ifdef CONFIG_SYS_USB_OHCI_BOARD_INIT
/* board dependant cleanup */
if(usb_board_stop())
return -1;
#endif
-#ifdef CFG_USB_OHCI_CPU_INIT
+#ifdef CONFIG_SYS_USB_OHCI_CPU_INIT
/* cpu dependant cleanup */
if(usb_cpu_stop())
return -1;
diff --git a/drivers/usb/usb_ohci.h b/drivers/usb/usb_ohci.h
index 7a04bf5e8a..c1af547fa4 100644
--- a/drivers/usb/usb_ohci.h
+++ b/drivers/usb/usb_ohci.h
@@ -155,8 +155,8 @@ struct ohci_hcca {
/*
* Maximum number of root hub ports.
*/
-#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
-# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
+#ifndef CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
+# error "CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS undefined!"
#endif
/*
@@ -191,7 +191,7 @@ struct ohci_regs {
__u32 a;
__u32 b;
__u32 status;
- __u32 portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
+ __u32 portstatus[CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS];
} roothub;
} __attribute((aligned(32)));
diff --git a/drivers/usb/usbdcore_mpc8xx.c b/drivers/usb/usbdcore_mpc8xx.c
index 122793c023..fa02003d1d 100644
--- a/drivers/usb/usbdcore_mpc8xx.c
+++ b/drivers/usb/usbdcore_mpc8xx.c
@@ -133,7 +133,7 @@ static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid);
int udc_init (void)
{
/* Init various pointers */
- immr = (immap_t *) CFG_IMMR;
+ immr = (immap_t *) CONFIG_SYS_IMMR;
cp = (cpm8xx_t *) & (immr->im_cpm);
usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]);
usbp = (usb_t *) & (cp->cp_scc[0]);
@@ -752,7 +752,7 @@ static short mpc8xx_udc_handle_txerr ()
static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid)
{
if ((*rx_cbdp)->cbd_sc & RX_BD_W) {
- *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR);
+ *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CONFIG_SYS_IMMR);
} else {
(*rx_cbdp)++;
@@ -780,7 +780,7 @@ static void mpc8xx_udc_flush_tx_fifo (int epid)
usbp->uscom = 0x40 | 0;
/* reset ring */
- tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR);
+ tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CONFIG_SYS_IMMR);
tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
@@ -886,7 +886,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
}
ep = epi->endpoint_address & 0x03;
- tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR);
if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) {
mpc8xx_udc_flush_tx_fifo (ep);
@@ -903,7 +903,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
return -1;
}
- tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR);
while (tx_cbdp->cbd_sc & TX_BD_R) {
};
tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W);
@@ -1187,10 +1187,10 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
volatile cpm8xx_t * cp)
{
-#if defined(CFG_USB_EXTC_CLK)
+#if defined(CONFIG_SYS_USB_EXTC_CLK)
/* This has been tested with a 48MHz crystal on CLK6 */
- switch (CFG_USB_EXTC_CLK) {
+ switch (CONFIG_SYS_USB_EXTC_CLK) {
case 1:
immr->im_ioport.iop_papar |= 0x0100;
immr->im_ioport.iop_padir &= ~0x0100;
@@ -1216,7 +1216,7 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
break;
}
-#elif defined(CFG_USB_BRGCLK)
+#elif defined(CONFIG_SYS_USB_BRGCLK)
/* This has been tested with brgclk == 50MHz */
int divisor = 0;
@@ -1233,7 +1233,7 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
divisor = (gd->cpu_clk / 48000000L) - 1;
cp->cp_sicr &= ~0x0000003F;
- switch (CFG_USB_BRGCLK) {
+ switch (CONFIG_SYS_USB_BRGCLK) {
case 1:
cp->cp_brgc1 |= (divisor | CPM_BRG_EN);
cp->cp_sicr &= ~0x2F;
@@ -1256,7 +1256,7 @@ static void mpc8xx_udc_clock_init (volatile immap_t * immr,
}
#else
-#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
+#error "CONFIG_SYS_USB_EXTC_CLK or CONFIG_SYS_USB_BRGCLK must be defined"
#endif
}
diff --git a/drivers/video/ati_radeon_fb.c b/drivers/video/ati_radeon_fb.c
index 650380b2c2..9ebb0b0c96 100644
--- a/drivers/video/ati_radeon_fb.c
+++ b/drivers/video/ati_radeon_fb.c
@@ -653,7 +653,7 @@ void *video_hw_init(void)
tmp = 0;
- videomode = CFG_DEFAULT_VIDEO_MODE;
+ videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
/* get video mode via environment */
if ((penv = getenv ("videomode")) != NULL) {
/* deceide if it is a string */
@@ -672,7 +672,7 @@ void *video_hw_init(void)
break;
}
if (i == VESA_MODES_COUNT) {
- printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE);
+ printf ("no VESA Mode found, switching to mode 0x%x ", CONFIG_SYS_DEFAULT_VIDEO_MODE);
i = 0;
}
res_mode = (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].resindex];
@@ -732,7 +732,7 @@ void *video_hw_init(void)
break;
}
- pGD->isaBase = CFG_ISA_IO_BASE_ADDRESS;
+ pGD->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
pGD->pciBase = rinfo->fb_base_phys;
pGD->frameAdrs = rinfo->fb_base_phys;
pGD->memSize = 64 * 1024 * 1024;
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index fe418f11b2..779aa4b53e 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -61,7 +61,7 @@
CONFIG_CONSOLE_CURSOR - on/off drawing cursor is done with delay
loop in VIDEO_TSTC_FCT (i8042)
- CFG_CONSOLE_BLINK_COUNT - value for delay loop - blink rate
+ CONFIG_SYS_CONSOLE_BLINK_COUNT - value for delay loop - blink rate
CONFIG_CONSOLE_TIME - display time/date in upper right corner,
needs CONFIG_CMD_DATE and CONFIG_CONSOLE_CURSOR
CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner
@@ -824,19 +824,19 @@ int video_display_bitmap (ulong bmp_image, int x, int y)
/*
* Could be a gzipped bmp image, try to decrompress...
*/
- len = CFG_VIDEO_LOGO_MAX_SIZE;
- dst = malloc(CFG_VIDEO_LOGO_MAX_SIZE);
+ len = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
+ dst = malloc(CONFIG_SYS_VIDEO_LOGO_MAX_SIZE);
if (dst == NULL) {
printf("Error: malloc in gunzip failed!\n");
return(1);
}
- if (gunzip(dst, CFG_VIDEO_LOGO_MAX_SIZE, (uchar *)bmp_image, &len) != 0) {
+ if (gunzip(dst, CONFIG_SYS_VIDEO_LOGO_MAX_SIZE, (uchar *)bmp_image, &len) != 0) {
printf ("Error: no valid bmp or bmp.gz image at %lx\n", bmp_image);
free(dst);
return 1;
}
- if (len == CFG_VIDEO_LOGO_MAX_SIZE) {
- printf("Image could be truncated (increase CFG_VIDEO_LOGO_MAX_SIZE)!\n");
+ if (len == CONFIG_SYS_VIDEO_LOGO_MAX_SIZE) {
+ printf("Image could be truncated (increase CONFIG_SYS_VIDEO_LOGO_MAX_SIZE)!\n");
}
/*
diff --git a/drivers/video/ct69000.c b/drivers/video/ct69000.c
index cae662eaa9..ae219ccf83 100644
--- a/drivers/video/ct69000.c
+++ b/drivers/video/ct69000.c
@@ -1107,7 +1107,7 @@ video_hw_init (void)
pGD->gdfIndex = GDF_24BIT_888RGB;
break;
}
- pGD->isaBase = CFG_ISA_IO_BASE_ADDRESS;
+ pGD->isaBase = CONFIG_SYS_ISA_IO_BASE_ADDRESS;
pGD->pciBase = pci_mem_base;
pGD->frameAdrs = pci_mem_base;
pGD->memSize = chips_param->max_mem;
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c
index d47cb03581..22a85d1a91 100644
--- a/drivers/video/mb862xx.c
+++ b/drivers/video/mb862xx.c
@@ -358,7 +358,7 @@ void *video_hw_init (void)
#endif
#if (defined(CONFIG_LWMON5) || \
- defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CFG_POST_SYSMON)
+ defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON)
/* Lamp on */
board_backlight_switch (1);
#endif
diff --git a/drivers/video/smiLynxEM.c b/drivers/video/smiLynxEM.c
index 390dd5697b..59b43efca3 100644
--- a/drivers/video/smiLynxEM.c
+++ b/drivers/video/smiLynxEM.c
@@ -596,7 +596,7 @@ void *video_hw_init (void)
tmp = 0;
- videomode = CFG_DEFAULT_VIDEO_MODE;
+ videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
/* get video mode via environment */
if ((penv = getenv ("videomode")) != NULL) {
/* deceide if it is a string */
@@ -615,7 +615,7 @@ void *video_hw_init (void)
break;
}
if (i == VESA_MODES_COUNT) {
- printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE);
+ printf ("no VESA Mode found, switching to mode 0x%x ", CONFIG_SYS_DEFAULT_VIDEO_MODE);
i = 0;
}
res_mode =
@@ -669,7 +669,7 @@ void *video_hw_init (void)
break;
}
- pGD->isaBase = CFG_ISA_IO;
+ pGD->isaBase = CONFIG_SYS_ISA_IO;
pGD->pciBase = pci_mem_base;
pGD->dprBase = (pci_mem_base + 0x400000 + 0x8000);
pGD->vprBase = (pci_mem_base + 0x400000 + 0xc000);
diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c
index c81e5bc141..d27ce1d2cd 100644
--- a/drivers/video/videomodes.c
+++ b/drivers/video/videomodes.c
@@ -23,7 +23,7 @@
/************************************************************************
Get Parameters for the video mode:
- The default video mode can be defined in CFG_DEFAULT_VIDEO_MODE.
+ The default video mode can be defined in CONFIG_SYS_DEFAULT_VIDEO_MODE.
If undefined, default video mode is set to 0x301
Parameters can be set via the variable "videomode" in the environment.
2 diferent ways are possible:
diff --git a/drivers/video/videomodes.h b/drivers/video/videomodes.h
index e2dffe7fed..0d7c335410 100644
--- a/drivers/video/videomodes.h
+++ b/drivers/video/videomodes.h
@@ -22,8 +22,8 @@
*/
-#ifndef CFG_DEFAULT_VIDEO_MODE
-#define CFG_DEFAULT_VIDEO_MODE 0x301
+#ifndef CONFIG_SYS_DEFAULT_VIDEO_MODE
+#define CONFIG_SYS_DEFAULT_VIDEO_MODE 0x301
#endif
/* Some mode definitions */