1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/net/npe/include/IxEthMii.h b/drivers/net/npe/include/IxEthMii.h
index 397253a947..93d3b790b2 100644
--- a/drivers/net/npe/include/IxEthMii.h
+++ b/drivers/net/npe/include/IxEthMii.h
@@ -83,7 +83,7 @@
  *
  * @brief Scan the MDIO bus for PHYs
  *  This function scans PHY addresses 0 through 31, and sets phyPresent[n] to 
- *  TRUE if a phy is discovered at address n. 
+ *  true if a phy is discovered at address n.
  *
  * - Reentrant    - no
  * - ISR Callable - no
@@ -120,9 +120,9 @@ PUBLIC IX_STATUS ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount);
  * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
  *   
  * @param phyAddr UINT32 [in] 
- * @param speed100 BOOL [in] - set to TRUE for 100Mbit/s operation, FALSE for 10Mbit/s
- * @param fullDuplex BOOL [in] - set to TRUE for Full Duplex, FALSE for Half Duplex
- * @param autonegotiate BOOL [in] - set to TRUE to enable autonegotiation
+ * @param speed100 BOOL [in] - set to true for 100Mbit/s operation, false for 10Mbit/s
+ * @param fullDuplex BOOL [in] - set to true for Full Duplex, false for Half Duplex
+ * @param autonegotiate BOOL [in] - set to true to enable autonegotiation
  *
  * @return IX_STATUS
  * - IX_SUCCESS
@@ -223,10 +223,10 @@ PUBLIC IX_STATUS ixEthMiiPhyReset(UINT32 phyAddr);
  * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
  *   
  * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
- * @param linkUp BOOL [out] - set to TRUE if the link is up
- * @param speed100 BOOL [out] - set to TRUE indicates 100Mbit/s, FALSE indicates 10Mbit/s
- * @param fullDuplex BOOL [out] - set to TRUE indicates Full Duplex, FALSE indicates Half Duplex
- * @param autoneg BOOL [out] - set to TRUE indicates autonegotiation is enabled, FALSE indicates autonegotiation is disabled
+ * @param linkUp BOOL [out] - set to true if the link is up
+ * @param speed100 BOOL [out] - set to true indicates 100Mbit/s, false indicates 10Mbit/s
+ * @param fullDuplex BOOL [out] - set to true indicates Full Duplex, false indicates Half Duplex
+ * @param autoneg BOOL [out] - set to true indicates autonegotiation is enabled, false indicates autonegotiation is disabled
  *
  * @return IX_STATUS
  * - IX_SUCCESS