diff options
Diffstat (limited to 'board/pcippc2/pcippc2.c')
| -rw-r--r-- | board/pcippc2/pcippc2.c | 253 |
1 files changed, 0 insertions, 253 deletions
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c deleted file mode 100644 index 5e6fc58cf7..0000000000 --- a/board/pcippc2/pcippc2.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include <asm/io.h> -#include <linux/mtd/doc2000.h> -#include <watchdog.h> -#include <pci.h> -#include <netdev.h> -#include <serial.h> - -#include "hardware.h" -#include "pcippc2.h" -#include "sconsole.h" -#include "fpga_serial.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_WATCHDOG) - -static int pcippc2_wdt_init_done = 0; - -void pcippc2_wdt_init (void); - -#endif - - /* Check board identity - */ -int checkboard (void) -{ -#ifdef CONFIG_PCIPPC2 - puts ("Board: Gespac PCIPPC-2\n"); -#else - puts ("Board: Gespac PCIPPC-6\n"); -#endif - return 0; -} - - /* RAM size is stored in CPC0_RGBAN1 - */ -u32 pcippc2_sdram_size (void) -{ - return in32 (REG (CPC0, RGBAN1)); -} - -phys_size_t initdram (int board_type) -{ - return cpc710_ram_init (); -} - -int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - out32 (REG (CPC0, SPOR), 0); - iobarrier_rw (); - while (1); - /* notreached */ - return (-1); -} - -int board_early_init_f (void) -{ - out32 (REG (CPC0, RSTR), 0xC0000000); - iobarrier_rw (); - - out32 (REG (CPC0, RSTR), 0xF0000000); - iobarrier_rw (); - - out32 (REG (CPC0, UCTL), 0x00F80000); - - out32 (REG (CPC0, SIOC0), 0x30000000); - - out32 (REG (CPC0, ABCNTL), 0x00000000); - - out32 (REG (CPC0, SESR), 0x00000000); - out32 (REG (CPC0, SEAR), 0x00000000); - - /* Detect IBM Avignon CPC710 Revision */ - if ((in32 (REG (CPC0, UCTL)) & 0x000000F0) == CPC710_TYPE_100P) - out32 (REG (CPC0, PGCHP), 0xA0000040); - else - out32 (REG (CPC0, PGCHP), 0x80800040); - - - out32 (REG (CPC0, ATAS), 0x709C2508); - - iobarrier_rw (); - - return 0; -} - -void after_reloc (ulong dest_addr) -{ - /* Jump to the main U-Boot board init code - */ - board_init_r ((gd_t *)gd, dest_addr); -} - -int misc_init_r (void) -{ - pcippc2_fpga_init (); - - pcippc2_cpci3264_init (); - -#if defined(CONFIG_WATCHDOG) - pcippc2_wdt_init (); -#endif - - fpga_serial_init (sconsole_get_baudrate ()); - - sconsole_putc = fpga_serial_putc; - sconsole_puts = default_serial_puts; - sconsole_getc = fpga_serial_getc; - sconsole_tstc = fpga_serial_tstc; - sconsole_setbrg = fpga_serial_setbrg; - - sconsole_flush (); - return (0); -} - -void pci_init_board (void) -{ - cpc710_pci_init (); - - /* FPGA requires no retry timeouts to be enabled - */ - cpc710_pci_enable_timeout (); -} - -#ifdef CONFIG_CMD_DOC -void doc_init (void) -{ - doc_probe (pcippc2_fpga1_phys + HW_FPGA1_DOC); -} -#endif - -void pcippc2_cpci3264_init (void) -{ - pci_dev_t bdf = pci_find_device(FPGA_VENDOR_ID, FPGA_DEVICE_ID, 0); - - if (bdf == -1) - { - puts("Unable to find FPGA !\n"); - hang(); - } - - if((in32(pcippc2_fpga0_phys + HW_FPGA0_BOARD) & 0x01000000) == 0x01000000) - /* 32-bits Compact PCI bus - LSB bit */ - { - iobarrier_rw(); - out32(BRIDGE(CPCI, PCIDG), 0x40000000); /* 32-bits bridge, Pipeline */ - iobarrier_rw(); - } -} - -#if defined(CONFIG_WATCHDOG) - -void pcippc2_wdt_init (void) -{ - out16r (FPGA (WDT, PROG), 0xffff); - out8 (FPGA (WDT, CTRL), 0x1); - - pcippc2_wdt_init_done = 1; -} - -void pcippc2_wdt_done (void) -{ - out8 (FPGA (WDT, CTRL), 0x0); - - pcippc2_wdt_init_done = 0; -} - -void pcippc2_wdt_reset (void) -{ - if (pcippc2_wdt_init_done == 1) - out8 (FPGA (WDT, REFRESH), 0x56); -} - -void watchdog_reset (void) -{ - int re_enable = disable_interrupts (); - - pcippc2_wdt_reset (); - if (re_enable) - enable_interrupts (); -} - -#if defined(CONFIG_CMD_BSP) -int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - switch (argc) { - case 1: - printf ("Watchdog timer status is %s\n", - pcippc2_wdt_init_done == 1 ? "on" : "off"); - - return 0; - case 2: - if (!strcmp(argv[1],"on")) { - pcippc2_wdt_init(); - printf("Watchdog timer now is on\n"); - - return 0; - - } else if (!strcmp(argv[1],"off")) { - pcippc2_wdt_done(); - printf("Watchdog timer now is off\n"); - - return 0; - - } else - break; - default: - break; - } - return cmd_usage(cmdtp); -} - -U_BOOT_CMD( - wd, 2, 1, do_wd, - "check and set watchdog", - "on - switch watchDog on\n" - "wd off - switch watchdog off\n" - "wd - print current status" -); - -#endif -#endif /* CONFIG_WATCHDOG */ - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} |