diff options
486 files changed, 15588 insertions, 10407 deletions
diff --git a/.gitignore b/.gitignore index e40eb7b669..be09894a0b 100644 --- a/.gitignore +++ b/.gitignore @@ -44,7 +44,6 @@ /u-boot.dtb /u-boot.sb /u-boot.geany -/include/u-boot.lst # # Generated files diff --git a/MAINTAINERS b/MAINTAINERS index 6b1f657b7d..d031c3a9df 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -606,6 +606,7 @@ Enric Balletbo i Serra <eballetbo@iseebcn.com> igep0020 ARM ARMV7 (OMAP3xx SoC) igep0030 ARM ARMV7 (OMAP3xx SoC) + igep0032 ARM ARMV7 (OMAP3xx SoC) Eric Benard <eric@eukrea.com> @@ -974,6 +975,8 @@ Tom Warren <twarren@nvidia.com> harmony Tegra20 (ARM7 & A9 Dual Core) seaboard Tegra20 (ARM7 & A9 Dual Core) + cardhu Tegra30 (ARM7 & A9 Quad Core) + dalmore Tegra114 (ARM7 & A15 Quad Core) Tom Warren <twarren@nvidia.com> Stephen Warren <swarren@nvidia.com> @@ -1035,6 +1038,14 @@ Pali Rohár <pali.rohar@gmail.com> nokia_rx51 ARM ARMV7 (OMAP34xx SoC) +Eric Nelson <eric.nelson@boundarydevices.com> + nitrogen6dl i.MX6DL 1GB + nitrogen6dl2g i.MX6DL 2GB + nitrogen6q i.MX6Q/6D 1GB + nitrogen6q2g i.MX6Q/6D 2GB + nitrogen6s i.MX6S 512MB + nitrogen6s1g i.MX6S 1GB + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -464,8 +464,8 @@ $(obj)u-boot.img: $(obj)u-boot.bin sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ -$(OBJTREE)/u-boot.imx : $(obj)u-boot.bin $(SUBDIR_TOOLS) depend - $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@ +$(obj)u-boot.imx: $(obj)u-boot.bin depend + $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx $(obj)u-boot.kwb: $(obj)u-boot.bin $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ @@ -556,10 +556,8 @@ GEN_UBOOT = \ $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot else GEN_UBOOT = \ - UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ - sed -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\ cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ - $$UNDEF_LST $(__OBJS) \ + $(__OBJS) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot endif @@ -592,11 +590,7 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot $(LDSCRIPT): depend $(MAKE) -C $(dir $@) $(notdir $@) -# The following line expands into whole rule which generates u-boot.lst, -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS))) -$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst +$(obj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@ nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend @@ -832,7 +826,6 @@ clean: $(obj)board/matrix_vision/*/bootscript.img \ $(obj)board/voiceblue/eeprom \ $(obj)u-boot.lds \ - $(obj)include/u-boot.lst \ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \ $(obj)arch/blackfin/cpu/init.{lds,elf} @rm -f $(obj)include/bmp_logo.h @@ -870,7 +863,7 @@ clobber: tidy @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map} @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map} @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map} - @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst} + @rm -f $(obj)spl/u-boot-spl.lds @rm -f $(obj)MLO MLO.byteswap @rm -f $(obj)SPL @rm -f $(obj)tools/xway-swap-bytes @@ -485,6 +485,16 @@ The following options need to be configured: Thumb2 this flag will result in Thumb2 code generated by GCC. + CONFIG_ARM_ERRATA_742230 + CONFIG_ARM_ERRATA_743622 + CONFIG_ARM_ERRATA_751472 + + If set, the workarounds for these ARM errata are applied early + during U-Boot startup. Note that these options force the + workarounds to be applied; no CPU-type/version detection + exists, unlike the similar options in the Linux kernel. Do not + set these options unless they apply! + - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ @@ -1533,6 +1543,17 @@ CBFS (Coreboot Filesystem) support allows for a "silent" boot where a splash screen is loaded very quickly after power-on. + CONFIG_SPLASHIMAGE_GUARD + + If this option is set, then U-Boot will prevent the environment + variable "splashimage" from being set to a problematic address + (see README.displaying-bmps and README.arm-unaligned-accesses). + This option is useful for targets where, due to alignment + restrictions, an improperly aligned BMP image will cause a data + abort. If you think you will not have problems with unaligned + accesses (for example because your toolchain prevents them) + there is no need to set this option. + CONFIG_SPLASH_SCREEN_ALIGN If this option is set the splash image can be freely positioned @@ -1553,6 +1574,14 @@ CBFS (Coreboot Filesystem) support => vertically centered image at x = dspWidth - bmpWidth - 9 + CONFIG_SPLASH_SCREEN_PREPARE + + If this option is set then the board_splash_screen_prepare() + function, which must be defined in your code, is called as part + of the splash screen display sequence. It gives the board an + opportunity to prepare the splash image data before it is + processed and sent to the frame buffer by U-Boot. + - Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP If this option is set, additionally to standard BMP diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index d11e6f6270..46f4b64ff4 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -519,7 +519,7 @@ u32 spl_boot_device(void) case RCSR_MEM_TYPE_NOR: return BOOT_DEVICE_NOR; case RCSR_MEM_TYPE_ONENAND: - return BOOT_DEVICE_ONE_NAND; + return BOOT_DEVICE_ONENAND; default: return BOOT_DEVICE_NONE; } diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c index 5962e15b4f..6a94179d4a 100644 --- a/arch/arm/cpu/arm720t/tegra114/cpu.c +++ b/arch/arm/cpu/arm720t/tegra114/cpu.c @@ -201,6 +201,7 @@ void t114_init_clocks(void) reset_set_enable(PERIPH_ID_MSELECT, 0); reset_set_enable(PERIPH_ID_EMC1, 0); reset_set_enable(PERIPH_ID_MC1, 0); + reset_set_enable(PERIPH_ID_DVFS, 0); debug("t114_init_clocks exit\n"); } @@ -269,6 +270,8 @@ void powerup_cpus(void) void start_cpu(u32 reset_vector) { + u32 imme, inst; + debug("start_cpu entry, reset_vector = %x\n", reset_vector); t114_init_clocks(); @@ -285,12 +288,38 @@ void start_cpu(u32 reset_vector) /* Take CPU(s) out of reset */ remove_cpu_resets(); + /* Set the entry point for CPU execution from reset */ + /* - * Set the entry point for CPU execution from reset, - * if it's a non-zero value. + * A01P with patched boot ROM; vector hard-coded to 0x4003fffc. + * See nvbug 1193357 for details. */ - if (reset_vector) - writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); + + /* mov r0, #lsb(reset_vector) */ + imme = reset_vector & 0xffff; + inst = imme & 0xfff; + inst |= ((imme >> 12) << 16); + inst |= 0xe3000000; + writel(inst, 0x4003fff0); + + /* movt r0, #msb(reset_vector) */ + imme = (reset_vector >> 16) & 0xffff; + inst = imme & 0xfff; + inst |= ((imme >> 12) << 16); + inst |= 0xe3400000; + writel(inst, 0x4003fff4); + + /* bx r0 */ + writel(0xe12fff10, 0x4003fff8); + + /* b -12 */ + imme = (u32)-20; + inst = (imme >> 2) & 0xffffff; + inst |= 0xea000000; + writel(inst, 0x4003fffc); + + /* Write to orignal location for compatibility */ + writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); /* If the CPU(s) don't already have power, power 'em up */ powerup_cpus(); diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds index 25d2a32631..e483820f3f 100644 --- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds +++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds @@ -51,7 +51,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c index 0448c0b133..92185460a1 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -61,20 +61,20 @@ char *get_cpu_name() if (cpu_is_at91sam9x5()) { switch (extension_id) { case ARCH_EXID_AT91SAM9G15: - return CONFIG_SYS_AT91_G15_CPU_NAME; + return "AT91SAM9G15"; case ARCH_EXID_AT91SAM9G25: - return CONFIG_SYS_AT91_G25_CPU_NAME; + return "AT91SAM9G25"; case ARCH_EXID_AT91SAM9G35: - return CONFIG_SYS_AT91_G35_CPU_NAME; + return "AT91SAM9G35"; case ARCH_EXID_AT91SAM9X25: - return CONFIG_SYS_AT91_X25_CPU_NAME; + return "AT91SAM9X25"; case ARCH_EXID_AT91SAM9X35: - return CONFIG_SYS_AT91_X35_CPU_NAME; + return "AT91SAM9X35"; default: - return CONFIG_SYS_AT91_UNKNOWN_CPU; + return "Unknown CPU type"; } } else { - return CONFIG_SYS_AT91_UNKNOWN_CPU; + return "Unknown CPU type"; } } @@ -246,14 +246,14 @@ void at91_macb_hw_init(void) #ifndef CONFIG_RMII /* Only emac0 support MII */ if (has_emac0()) { - at91_set_b_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ - at91_set_b_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ - at91_set_b_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ - at91_set_b_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ - at91_set_b_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ - at91_set_b_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ - at91_set_b_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ - at91_set_b_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ } #endif } diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk index 47f24f580e..6a3a1bb354 100644 --- a/arch/arm/cpu/arm926ejs/config.mk +++ b/arch/arm/cpu/arm926ejs/config.mk @@ -34,6 +34,6 @@ PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) ifneq ($(CONFIG_IMX_CONFIG),) -ALL-y += $(OBJTREE)/u-boot.imx +ALL-y += $(obj)u-boot.imx endif diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c index 00b9aba457..43e766334c 100644 --- a/arch/arm/cpu/arm926ejs/mxs/clock.c +++ b/arch/arm/cpu/arm926ejs/mxs/clock.c @@ -289,7 +289,8 @@ static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp) void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq) { struct mxs_ssp_regs *ssp_regs; - const uint32_t sspclk = mxs_get_sspclk(bus); + const enum mxs_sspclock clk = mxs_ssp_clock_by_bus(bus); + const uint32_t sspclk = mxs_get_sspclk(clk); uint32_t reg; uint32_t divide, rate, tgtclk; diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs_init.h b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h index 2ddc5bc0c6..084def5b12 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxs_init.h +++ b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h @@ -30,7 +30,7 @@ void early_delay(int delay); void mxs_power_init(void); -#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT +#ifdef CONFIG_SPL_MXS_PSWITCH_WAIT void mxs_power_wait_pswitch(void); #else static inline void mxs_power_wait_pswitch(void) { } diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index f8392f6398..fdac73cfaa 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -27,6 +27,7 @@ #include <config.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> #include <linux/compiler.h> #include "mxs_init.h" @@ -119,6 +120,10 @@ static void initialize_dram_values(void) writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); #ifdef CONFIG_MX23 + /* + * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last + * element to be set + */ writel((1 << 24), MXS_DRAM_BASE + (4 * 8)); #endif } @@ -229,7 +234,7 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_ILIMIT | POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_PULLDOWN_ACTIVE, @@ -237,13 +242,20 @@ static void mx23_mem_setup_vddmem(void) early_delay(10000); - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_LINREG, &power_regs->hw_power_vddmemctrl); } static void mx23_mem_init(void) { + /* + * Reset/ungate the EMI block. This is essential, otherwise the system + * suffers from memory instability. This thing is mx23 specific and is + * no longer present on mx28. + */ + mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE); + mx23_mem_setup_vddmem(); /* diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index e9d6302b7a..287c698ff7 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -921,7 +921,7 @@ void mxs_power_init(void) early_delay(1000); } -#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT +#ifdef CONFIG_SPL_MXS_PSWITCH_WAIT void mxs_power_wait_pswitch(void) { struct mxs_power_regs *power_regs = diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c index 373841180f..2039106e40 100644 --- a/arch/arm/cpu/arm926ejs/mxs/timer.c +++ b/arch/arm/cpu/arm926ejs/mxs/timer.c @@ -32,7 +32,11 @@ #include <asm/arch/sys_proto.h> /* Maximum fixed count */ -#define TIMER_LOAD_VAL 0xffffffff +#if defined(CONFIG_MX23) +#define TIMER_LOAD_VAL 0xffff +#elif defined(CONFIG_MX28) +#define TIMER_LOAD_VAL 0xffffffff +#endif DECLARE_GLOBAL_DATA_PTR; @@ -42,22 +46,22 @@ DECLARE_GLOBAL_DATA_PTR; /* * This driver uses 1kHz clock source. */ -#define MX28_INCREMENTER_HZ 1000 +#define MXS_INCREMENTER_HZ 1000 static inline unsigned long tick_to_time(unsigned long tick) { - return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ); + return tick / (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ); } static inline unsigned long time_to_tick(unsigned long time) { - return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ); + return time * (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ); } /* Calculate how many ticks happen in "us" microseconds */ static inline unsigned long us_to_tick(unsigned long us) { - return (us * MX28_INCREMENTER_HZ) / 1000000; + return (us * MXS_INCREMENTER_HZ) / 1000000; } int timer_init(void) @@ -69,7 +73,11 @@ int timer_init(void) mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); /* Set fixed_count to 0 */ +#if defined(CONFIG_MX23) + writel(0, &timrot_regs->hw_timrot_timcount0); +#elif defined(CONFIG_MX28) writel(0, &timrot_regs->hw_timrot_fixed_count0); +#endif /* Set UPDATE bit and 1Khz frequency */ writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD | @@ -77,7 +85,11 @@ int timer_init(void) &timrot_regs->hw_timrot_timctrl0); /* Set fixed_count to maximal value */ +#if defined(CONFIG_MX23) + writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0); +#elif defined(CONFIG_MX28) writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0); +#endif return 0; } @@ -86,9 +98,16 @@ unsigned long long get_ticks(void) { struct mxs_timrot_regs *timrot_regs = (struct mxs_timrot_regs *)MXS_TIMROT_BASE; + uint32_t now; /* Current tick value */ - uint32_t now = readl(&timrot_regs->hw_timrot_running_count0); +#if defined(CONFIG_MX23) + /* Upper bits are the valid ones. */ + now = readl(&timrot_regs->hw_timrot_timcount0) >> + TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET; +#elif defined(CONFIG_MX28) + now = readl(&timrot_regs->hw_timrot_running_count0); +#endif if (lastdec >= now) { /* @@ -117,17 +136,17 @@ ulong get_timer(ulong base) } /* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */ -#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0 +#define MXS_HW_DIGCTL_MICROSECONDS 0x8001c0c0 void __udelay(unsigned long usec) { uint32_t old, new, incr; uint32_t counter = 0; - old = readl(MX28_HW_DIGCTL_MICROSECONDS); + old = readl(MXS_HW_DIGCTL_MICROSECONDS); while (counter < usec) { - new = readl(MX28_HW_DIGCTL_MICROSECONDS); + new = readl(MXS_HW_DIGCTL_MICROSECONDS); /* Check if the timer wrapped. */ if (new < old) { @@ -152,5 +171,5 @@ void __udelay(unsigned long usec) ulong get_tbclk(void) { - return MX28_INCREMENTER_HZ; + return MXS_INCREMENTER_HZ; } diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds index fc0418afd1..67b204e447 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -51,12 +51,6 @@ SECTIONS . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - . = ALIGN(4); - .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds index cff660a7d7..7405917595 100644 --- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds @@ -51,12 +51,6 @@ SECTIONS . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - . = ALIGN(4); - .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index ee8c2b3fa5..4668b3cf2f 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -32,7 +32,7 @@ COBJS += cache_v7.o COBJS += cpu.o COBJS += syslib.o -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA),) +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6),) SOBJS += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index ab313265d0..e35a3e3a70 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -56,11 +56,11 @@ int cpu_mmc_init(bd_t *bis) { int ret; - ret = omap_mmc_init(0, 0, 0); + ret = omap_mmc_init(0, 0, 0, -1, -1); if (ret) return ret; - return omap_mmc_init(1, 0, 0); + return omap_mmc_init(1, 0, 0, -1, -1); } #endif diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c index fd9fc4a720..448cc40157 100644 --- a/arch/arm/cpu/armv7/am33xx/ddr.c +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -45,13 +45,19 @@ static struct ddr_cmdtctrl *ioctrl_reg = { */ void config_sdram(const struct emif_regs *regs) { - writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl); - writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw); - if (regs->zq_config){ + if (regs->zq_config) { + /* + * A value of 0x2800 for the REF CTRL will give us + * about 570us for a delay, which will be long enough + * to configure things. + */ + writel(0x2800, &emif_reg->emif_sdram_ref_ctrl); writel(regs->zq_config, &emif_reg->emif_zq_config); writel(regs->sdram_config, &cstat->secure_emif_sdram_config); } writel(regs->sdram_config, &emif_reg->emif_sdram_config); + writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl); + writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw); } /** diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds new file mode 100644 index 0000000000..b6a929ff7e --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/armv7/start.o (.text) + *(.text*) + } >.sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } >.sram + + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } >.sdram +} diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index 350e946392..9c3e2f3ce4 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -40,5 +40,5 @@ PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED) ifneq ($(CONFIG_IMX_CONFIG),) -ALL-y += $(OBJTREE)/u-boot.imx +ALL-y += $(obj)u-boot.imx endif diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile index cbce411cca..4f9ca6890c 100644 --- a/arch/arm/cpu/armv7/mx6/Makefile +++ b/arch/arm/cpu/armv7/mx6/Makefile @@ -28,7 +28,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS = soc.o clock.o -SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index a8aad5dd0a..193ba1240f 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -30,6 +30,7 @@ #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/imx-common/boot_mode.h> +#include <stdbool.h> struct scu_regs { u32 ctrl; @@ -121,12 +122,23 @@ void set_vddsoc(u32 mv) writel(reg, &anatop->reg_core); } +static void imx_set_wdog_powerdown(bool enable) +{ + struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR; + struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR; + + /* Write to the PDE (Power Down Enable) bit */ + writew(enable, &wdog1->wmcr); + writew(enable, &wdog2->wmcr); +} + int arch_cpu_init(void) { init_aips(); set_vddsoc(1200); /* Set VDDSOC to 1.2V */ + imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */ return 0; } @@ -193,3 +205,7 @@ const struct boot_mode soc_boot_modes[] = { {"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, {NULL, 0}, }; + +void s_init(void) +{ +} diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 2b584e0a53..24cbe2da05 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -55,17 +55,20 @@ void spl_board_init(void) #ifdef CONFIG_SPL_NAND_SUPPORT gpmc_init(); #endif +#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) + arch_misc_init(); +#endif } int board_mmc_init(bd_t *bis) { switch (spl_boot_device()) { case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); break; case BOOT_DEVICE_MMC2: case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0); + omap_mmc_init(1, 0, 0, -1, -1); break; } return 0; diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index b1fd277d6d..9ed18995ea 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -36,6 +36,7 @@ #include <asm/arch/sys_proto.h> #include <asm/utils.h> #include <asm/omap_gpio.h> +#include <asm/emif.h> #ifndef CONFIG_SPL_BUILD /* @@ -46,9 +47,20 @@ #define puts(s) #endif +const u32 sys_clk_array[8] = { + 12000000, /* 12 MHz */ + 13000000, /* 13 MHz */ + 16800000, /* 16.8 MHz */ + 19200000, /* 19.2 MHz */ + 26000000, /* 26 MHz */ + 27000000, /* 27 MHz */ + 38400000, /* 38.4 MHz */ + 20000000, /* 20 MHz */ +}; + static inline u32 __get_sys_clk_index(void) { - u32 ind; + s8 ind; /* * For ES1 the ROM code calibration of sys clock is not reliable * due to hw issue. So, use hard-coded value. If this value is not @@ -60,8 +72,15 @@ static inline u32 __get_sys_clk_index(void) ind = OMAP_SYS_CLK_IND_38_4_MHZ; else { /* SYS_CLKSEL - 1 to match the dpll param array indices */ - ind = (readl(&prcm->cm_sys_clksel) & + ind = (readl((*prcm)->cm_sys_clksel) & CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; + /* + * SYS_CLKSEL value for 20MHz is 0. This is introduced newly + * in DRA7XX socs. SYS_CLKSEL -1 will be greater than + * NUM_SYS_CLK. So considering the last 3 bits as the index + * for the dpll param array. + */ + ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK; } return ind; } @@ -75,7 +94,34 @@ u32 get_sys_clk_freq(void) return sys_clk_array[index]; } -static inline void do_bypass_dpll(u32 *const base) +void setup_post_dividers(u32 const base, const struct dpll_params *params) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + /* Setup post-dividers */ + if (params->m2 >= 0) + writel(params->m2, &dpll_regs->cm_div_m2_dpll); + if (params->m3 >= 0) + writel(params->m3, &dpll_regs->cm_div_m3_dpll); + if (params->m4_h11 >= 0) + writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll); + if (params->m5_h12 >= 0) + writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll); + if (params->m6_h13 >= 0) + writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll); + if (params->m7_h14 >= 0) + writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll); + if (params->h21 >= 0) + writel(params->h21, &dpll_regs->cm_div_h21_dpll); + if (params->h22 >= 0) + writel(params->h22, &dpll_regs->cm_div_h22_dpll); + if (params->h23 >= 0) + writel(params->h23, &dpll_regs->cm_div_h23_dpll); + if (params->h24 >= 0) + writel(params->h24, &dpll_regs->cm_div_h24_dpll); +} + +static inline void do_bypass_dpll(u32 const base) { struct dpll_regs *dpll_regs = (struct dpll_regs *)base; @@ -85,17 +131,17 @@ static inline void do_bypass_dpll(u32 *const base) CM_CLKMODE_DPLL_EN_SHIFT); } -static inline void wait_for_bypass(u32 *const base) +static inline void wait_for_bypass(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("Bypassing DPLL failed %p\n", base); + printf("Bypassing DPLL failed %x\n", base); } } -static inline void do_lock_dpll(u32 *const base) +static inline void do_lock_dpll(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; @@ -104,18 +150,18 @@ static inline void do_lock_dpll(u32 *const base) DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); } -static inline void wait_for_lock(u32 *const base) +static inline void wait_for_lock(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("DPLL locking failed for %p\n", base); + printf("DPLL locking failed for %x\n", base); hang(); } } -inline u32 check_for_lock(u32 *const base) +inline u32 check_for_lock(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK; @@ -123,12 +169,65 @@ inline u32 check_for_lock(u32 *const base) return lock; } -static void do_setup_dpll(u32 *const base, const struct dpll_params *params, +const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->mpu[sysclk_ind]; +} + +const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->core[sysclk_ind]; +} + +const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->per[sysclk_ind]; +} + +const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->iva[sysclk_ind]; +} + +const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->usb[sysclk_ind]; +} + +const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data) +{ +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->abe[sysclk_ind]; +#else + return dpll_data->abe; +#endif +} + +static const struct dpll_params *get_ddr_dpll_params + (struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + + if (!dpll_data->ddr) + return NULL; + return &dpll_data->ddr[sysclk_ind]; +} + +static void do_setup_dpll(u32 const base, const struct dpll_params *params, u8 lock, char *dpll) { u32 temp, M, N; struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + if (!params) + return; + temp = readl(&dpll_regs->cm_clksel_dpll); if (check_for_lock(base)) { @@ -183,7 +282,7 @@ u32 omap_ddr_clk(void) omap_rev = omap_revision(); sys_clk_khz = get_sys_clk_freq() / 1000; - core_dpll_params = get_core_dpll_params(); + core_dpll_params = get_core_dpll_params(*dplls_data); debug("sys_clk %d\n ", sys_clk_khz * 1000); @@ -235,24 +334,19 @@ void configure_mpu_dpll(void) */ if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) { mpu_dpll_regs = - (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu; - bypass_dpll(&prcm->cm_clkmode_dpll_mpu); - clrbits_le32(&prcm->cm_mpu_mpu_clkctrl, + (struct dpll_regs *)((*prcm)->cm_clkmode_dpll_mpu); + bypass_dpll((*prcm)->cm_clkmode_dpll_mpu); + clrbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, + setbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll, CM_CLKSEL_DCC_EN_MASK); } - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); + params = get_mpu_dpll_params(*dplls_data); - params = get_mpu_dpll_params(); - - do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); debug("MPU DPLL locked\n"); } @@ -271,17 +365,17 @@ static void setup_usb_dpll(void) * Use CLKINP in KHz and adjust the denominator accordingly so * that we have enough accuracy and at the same time no overflow */ - params = get_usb_dpll_params(); + params = get_usb_dpll_params(*dplls_data); num = params->m * sys_clk_khz; den = (params->n + 1) * 250 * 1000; num += den - 1; sd_div = num / den; - clrsetbits_le32(&prcm->cm_clksel_dpll_usb, + clrsetbits_le32((*prcm)->cm_clksel_dpll_usb, CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK, sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT); /* Now setup the dpll with the regular function */ - do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); } #endif @@ -293,28 +387,28 @@ static void setup_dplls(void) debug("setup_dplls\n"); /* CORE dpll */ - params = get_core_dpll_params(); /* default - safest */ + params = get_core_dpll_params(*dplls_data); /* default - safest */ /* * Do not lock the core DPLL now. Just set it up. * Core DPLL will be locked after setting up EMIF * using the FREQ_UPDATE method(freq_update_core()) */ - if (omap_revision() != OMAP5432_ES1_0) - do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, DPLL_NO_LOCK, "core"); else - do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, DPLL_LOCK, "core"); /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */ temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) | (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) | (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT); - writel(temp, &prcm->cm_clksel_core); + writel(temp, (*prcm)->cm_clksel_core); debug("Core DPLL configured\n"); /* lock PER dpll */ - params = get_per_dpll_params(); - do_setup_dpll(&prcm->cm_clkmode_dpll_per, + params = get_per_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_per, params, DPLL_LOCK, "per"); debug("PER DPLL locked\n"); @@ -324,6 +418,9 @@ static void setup_dplls(void) #ifdef CONFIG_USB_EHCI_OMAP setup_usb_dpll(); #endif + params = get_ddr_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_ddrphy, + params, DPLL_LOCK, "ddr"); } #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL @@ -333,14 +430,14 @@ static void setup_non_essential_dplls(void) const struct dpll_params *params; /* IVA */ - clrsetbits_le32(&prcm->cm_bypclk_dpll_iva, + clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva, CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2); - params = get_iva_dpll_params(); - do_setup_dpll(&prcm->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); + params = get_iva_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); /* Configure ABE dpll */ - params = get_abe_dpll_params(); + params = get_abe_dpll_params(*dplls_data); #ifdef CONFIG_SYS_OMAP_ABE_SYSCK abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; #else @@ -349,64 +446,65 @@ static void setup_non_essential_dplls(void) * We need to enable some additional options to achieve * 196.608MHz from 32768 Hz */ - setbits_le32(&prcm->cm_clkmode_dpll_abe, + setbits_le32((*prcm)->cm_clkmode_dpll_abe, CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK| CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK| CM_CLKMODE_DPLL_LPMODE_EN_MASK| CM_CLKMODE_DPLL_REGM4XEN_MASK); /* Spend 4 REFCLK cycles at each stage */ - clrsetbits_le32(&prcm->cm_clkmode_dpll_abe, + clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe, CM_CLKMODE_DPLL_RAMP_RATE_MASK, 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT); #endif /* Select the right reference clk */ - clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel, + clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel, CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK, abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT); /* Lock the dpll */ - do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); } #endif -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv) +u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic) { - u32 step; - int ret = 0; - - /* See if we can first get the GPIO if needed */ - if (gpio >= 0) - ret = gpio_request(gpio, "TPS62361_VSEL0_GPIO"); - if (ret < 0) { - printf("%s: gpio %d request failed %d\n", __func__, gpio, ret); - gpio = -1; - } - - /* Pull the GPIO low to select SET0 register, while we program SET1 */ - if (gpio >= 0) - gpio_direction_output(gpio, 0); + u32 offset_code; - step = volt_mv - TPS62361_BASE_VOLT_MV; - step /= 10; + volt_offset -= pmic->base_offset; - debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step); - if (omap_vc_bypass_send_value(TPS62361_I2C_SLAVE_ADDR, reg, step)) - puts("Scaling voltage failed for vdd_mpu from TPS\n"); + offset_code = (volt_offset + pmic->step - 1) / pmic->step; - /* Pull the GPIO high to select SET1 register */ - if (gpio >= 0) - gpio_direction_output(gpio, 1); + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + return offset_code + pmic->start_code; } -void do_scale_vcore(u32 vcore_reg, u32 volt_mv) +void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) { u32 offset_code; u32 offset = volt_mv; + int ret = 0; + + /* See if we can first get the GPIO if needed */ + if (pmic->gpio_en) + ret = gpio_request(pmic->gpio, "PMIC_GPIO"); + + if (ret < 0) { + printf("%s: gpio %d request failed %d\n", __func__, + pmic->gpio, ret); + return; + } + + /* Pull the GPIO low to select SET0 register, while we program SET1 */ + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 0); /* convert to uV for better accuracy in the calculations */ offset *= 1000; - offset_code = get_offset_code(offset); + offset_code = get_offset_code(offset, pmic); debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, offset_code); @@ -414,16 +512,46 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv) if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR, vcore_reg, offset_code)) printf("Scaling voltage failed for 0x%x\n", vcore_reg); + + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 1); +} + +/* + * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva + * We set the maximum voltages allowed here because Smart-Reflex is not + * enabled in bootloader. Voltage initialization in the kernel will set + * these to the nominal values after enabling Smart-Reflex + */ +void scale_vcores(struct vcores_data const *vcores) +{ + omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + + do_scale_vcore(vcores->core.addr, vcores->core.value, + vcores->core.pmic); + + do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, + vcores->mpu.pmic); + + do_scale_vcore(vcores->mm.addr, vcores->mm.value, + vcores->mm.pmic); + + if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { + /* Configure LDO SRAM "magic" bits */ + writel(2, (*prcm)->prm_sldo_core_setup); + writel(2, (*prcm)->prm_sldo_mpu_setup); + writel(2, (*prcm)->prm_sldo_mm_setup); + } } -static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode) +static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode) { clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); - debug("Enable clock domain - %p\n", clkctrl_reg); + debug("Enable clock domain - %x\n", clkctrl_reg); } -static inline void wait_for_clk_enable(u32 *clkctrl_addr) +static inline void wait_for_clk_enable(u32 clkctrl_addr) { u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; u32 bound = LDELAY; @@ -435,19 +563,19 @@ static inline void wait_for_clk_enable(u32 *clkctrl_addr) idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> MODULE_CLKCTRL_IDLEST_SHIFT; if (--bound == 0) { - printf("Clock enable failed for 0x%p idlest 0x%x\n", + printf("Clock enable failed for 0x%x idlest 0x%x\n", clkctrl_addr, clkctrl); return; } } } -static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode, +static inline void enable_clock_module(u32 const clkctrl_addr, u32 enable_mode, u32 wait_for_enable) { clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); - debug("Enable clock module - %p\n", clkctrl_addr); + debug("Enable clock module - %x\n", clkctrl_addr); if (wait_for_enable) wait_for_clk_enable(clkctrl_addr); } @@ -458,12 +586,12 @@ void freq_update_core(void) const struct dpll_params *core_dpll_params; u32 omap_rev = omap_revision(); - core_dpll_params = get_core_dpll_params(); + core_dpll_params = get_core_dpll_params(*dplls_data); /* Put EMIF clock domain in sw wakeup mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, + enable_clock_domain((*prcm)->cm_memif_clkstctrl, CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK | SHADOW_FREQ_CONFIG1_DLL_RESET_MASK; @@ -475,9 +603,9 @@ void freq_update_core(void) SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) & SHADOW_FREQ_CONFIG1_M2_DIV_MASK; - writel(freq_config1, &prcm->cm_shadow_freq_config1); + writel(freq_config1, (*prcm)->cm_shadow_freq_config1); if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0, - &prcm->cm_shadow_freq_config1, LDELAY)) { + (u32 *) (*prcm)->cm_shadow_freq_config1, LDELAY)) { puts("FREQ UPDATE procedure failed!!"); hang(); } @@ -489,20 +617,20 @@ void freq_update_core(void) */ if (omap_rev != OMAP5430_ES1_0) { /* Put EMIF clock domain back in hw auto mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, + enable_clock_domain((*prcm)->cm_memif_clkstctrl, CD_CLKCTRL_CLKTRCTRL_HW_AUTO); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); } } -void bypass_dpll(u32 *const base) +void bypass_dpll(u32 const base) { do_bypass_dpll(base); wait_for_bypass(base); } -void lock_dpll(u32 *const base) +void lock_dpll(u32 const base) { do_lock_dpll(base); wait_for_lock(base); @@ -511,39 +639,39 @@ void lock_dpll(u32 *const base) void setup_clocks_for_console(void) { /* Do not add any spl_debug prints in this function */ - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, CD_CLKCTRL_CLKTRCTRL_SW_WKUP << CD_CLKCTRL_CLKTRCTRL_SHIFT); /* Enable all UARTs - console will be on one of them */ - clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart1_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart2_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, CD_CLKCTRL_CLKTRCTRL_HW_AUTO << CD_CLKCTRL_CLKTRCTRL_SHIFT); } -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, +void do_enable_clocks(u32 const *clk_domains, + u32 const *clk_modules_hw_auto, + u32 const *clk_modules_explicit_en, u8 wait_for_enable) { u32 i, max = 100; @@ -582,7 +710,7 @@ void prcm_init(void) case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: enable_basic_clocks(); - scale_vcores(); + scale_vcores(*omap_vcores); setup_dplls(); #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL setup_non_essential_dplls(); diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 88253cf8ce..9eb1279d41 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -66,6 +66,19 @@ inline u32 emif_num(u32 base) return 0; } +/* + * Get SDRAM type connected to EMIF. + * Assuming similar SDRAM parts are connected to both EMIF's + * which is typically the case. So it is sufficient to get + * SDRAM type from EMIF1. + */ +u32 emif_sdram_type() +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + + return (readl(&emif->emif_sdram_config) & + EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT; +} static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) { @@ -110,11 +123,13 @@ void emif_reset_phy(u32 base) static void do_lpddr2_init(u32 base, u32 cs) { u32 mr_addr; + const struct lpddr2_mr_regs *mr_regs; + get_lpddr2_mr_regs(&mr_regs); /* Wait till device auto initialization is complete */ while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) ; - set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT); + set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10); /* * tZQINIT = 1 us * Enough loops assuming a maximum of 2GHz @@ -122,22 +137,18 @@ static void do_lpddr2_init(u32 base, u32 cs) sdelay(2000); - if (omap_revision() >= OMAP5430_ES1_0) - set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8); - else - set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3); - - set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY); + set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1); + set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16); /* * Enable refresh along with writing MR2 * Encoding of RL in MR2 is (RL - 2) */ mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK; - set_mr(base, cs, mr_addr, RL_FINAL - 2); + set_mr(base, cs, mr_addr, mr_regs->mr2); - if (omap_revision() >= OMAP5430_ES1_0) - set_mr(base, cs, LPDDR2_MR3, 0x1); + if (mr_regs->mr3 > 0) + set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3); } static void lpddr2_init(u32 base, const struct emif_regs *regs) @@ -255,9 +266,6 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs) static void ddr3_init(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 *ext_phy_ctrl_base = 0; - u32 *emif_ext_phy_ctrl_base = 0; - u32 i = 0; /* * Set SDRAM_CONFIG and PHY control registers to locked frequency @@ -277,27 +285,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); - ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1); - emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1); - - /* Configure external phy control timing registers */ - for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) { - writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++); - } - - /* - * external phy 6-24 registers do not change with - * ddr frequency - */ - for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) { - writel(ddr3_ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(ddr3_ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); - } + do_ext_phy_settings(base, regs); /* enable leveling */ writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); @@ -1079,7 +1067,7 @@ static void do_sdram_init(u32 base) * OPP to another) */ if (!(in_sdram || warm_reset())) { - if (omap_revision() != OMAP5432_ES1_0) + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) lpddr2_init(base, regs); else ddr3_init(base, regs); @@ -1096,9 +1084,6 @@ void emif_post_init_config(u32 base) struct emif_reg_struct *emif = (struct emif_reg_struct *)base; u32 omap_rev = omap_revision(); - if (omap_rev == OMAP5430_ES1_0) - return; - /* reset phy on ES2.0 */ if (omap_rev == OMAP4430_ES2_0) emif_reset_phy(base); @@ -1206,7 +1191,7 @@ void dmm_init(u32 base) writel(lisa_map_regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); - if (omap_revision() >= OMAP4460_ES1_0) { + if (lisa_map_regs->is_ma_present) { hw_lisa_map_regs = (struct dmm_lisa_map_regs *)MA_BASE; @@ -1264,7 +1249,7 @@ void dmm_init(u32 base) void sdram_init(void) { u32 in_sdram, size_prog, size_detect; - u32 omap_rev = omap_revision(); + u32 sdram_type = emif_sdram_type(); debug(">>sdram_init()\n"); @@ -1275,10 +1260,10 @@ void sdram_init(void) debug("in_sdram = %d\n", in_sdram); if (!(in_sdram || warm_reset())) { - if (omap_rev != OMAP5432_ES1_0) - bypass_dpll(&prcm->cm_clkmode_dpll_core); + if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) + bypass_dpll((*prcm)->cm_clkmode_dpll_core); else - writel(CM_DLL_CTRL_NO_OVERRIDE, &prcm->cm_dll_ctrl); + writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl); } if (!in_sdram) @@ -1298,7 +1283,7 @@ void sdram_init(void) } /* for the shadow registers to take effect */ - if (omap_rev != OMAP5432_ES1_0) + if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) freq_update_core(); /* Do some testing after the init */ diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 9ef10bdf2d..05ff2e868f 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -32,6 +32,8 @@ #include <asm/arch/sys_proto.h> #include <asm/sizes.h> #include <asm/emif.h> +#include <asm/omap_common.h> +#include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -79,12 +81,17 @@ u32 cortex_rev(void) void omap_rev_string(void) { u32 omap_rev = omap_revision(); + u32 soc_variant = (omap_rev & 0xF0000000) >> 28; u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16; u32 major_rev = (omap_rev & 0x00000F00) >> 8; u32 minor_rev = (omap_rev & 0x000000F0) >> 4; - printf("OMAP%x ES%x.%x\n", omap_variant, major_rev, - minor_rev); + if (soc_variant) + printf("OMAP"); + else + printf("DRA"); + printf("%x ES%x.%x\n", omap_variant, major_rev, + minor_rev); } #ifdef CONFIG_SPL_BUILD @@ -99,6 +106,10 @@ void spl_display_print(void) } #endif +void __weak srcomp_enable(void) +{ +} + /* * Routine: s_init * Description: Does early system init of watchdog, muxing, andclocks @@ -116,6 +127,8 @@ void spl_display_print(void) void s_init(void) { init_omap_revision(); + hw_data_init(); + #ifdef CONFIG_SPL_BUILD if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0)) force_emif_self_refresh(); @@ -123,6 +136,7 @@ void s_init(void) watchdog_init(); set_mux_conf_regs(); #ifdef CONFIG_SPL_BUILD + srcomp_enable(); setup_clocks_for_console(); gd = &gdata; @@ -235,10 +249,7 @@ int checkboard(void) */ u32 get_device_type(void) { - struct omap_sys_ctrl_regs *ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - return (readl(&ctrl->control_status) & + return (readl((*ctrl)->control_status) & (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT; } diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds index 40d64af84c..efae381bdb 100644 --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -48,10 +48,6 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram - .u_boot_list : { - #include <u-boot.lst> - } - . = ALIGN(4); __image_copy_end = .; _end = .; diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c index a045b77180..e6e5f7893c 100644 --- a/arch/arm/cpu/armv7/omap-common/vc.c +++ b/arch/arm/cpu/armv7/omap-common/vc.c @@ -81,13 +81,13 @@ void omap_vc_init(u16 speed_khz) cycles_low -= 7; val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) | (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT); - writel(val, &prcm->prm_vc_cfg_i2c_clk); + writel(val, (*prcm)->prm_vc_cfg_i2c_clk); val = CONFIG_OMAP_VC_I2C_HS_MCODE << PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT; /* No HS mode for now */ val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT; - writel(val, &prcm->prm_vc_cfg_i2c_mode); + writel(val, (*prcm)->prm_vc_cfg_i2c_mode); } /** @@ -113,14 +113,15 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data) reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT | reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT | reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT; - writel(reg_val, &prcm->prm_vc_val_bypass); + writel(reg_val, (*prcm)->prm_vc_val_bypass); /* Signal VC to send data */ - writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, &prcm->prm_vc_val_bypass); + writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, + (*prcm)->prm_vc_val_bypass); /* Wait on VC to complete transmission */ do { - reg_val = readl(&prcm->prm_vc_val_bypass) & + reg_val = readl((*prcm)->prm_vc_val_bypass) & PRM_VC_VAL_BYPASS_VALID_BIT; if (!reg_val) break; diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 89c587e310..c6d9a425a5 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -98,11 +98,11 @@ int board_mmc_init(bd_t *bis) { switch (spl_boot_device()) { case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); break; case BOOT_DEVICE_MMC2: case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0); + omap_mmc_init(1, 0, 0, -1, -1); break; } return 0; @@ -110,7 +110,7 @@ int board_mmc_init(bd_t *bis) void spl_board_init(void) { -#ifdef CONFIG_SPL_NAND_SUPPORT +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) gpmc_init(); #endif #ifdef CONFIG_SPL_I2C_SUPPORT diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile index 83160a28f3..40808d18ff 100644 --- a/arch/arm/cpu/armv7/omap4/Makefile +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -27,8 +27,9 @@ LIB = $(obj)lib$(SOC).o COBJS += sdram_elpida.o COBJS += hwinit.o -COBJS += clocks.o COBJS += emif.o +COBJS += prcm-regs.o +COBJS += hw_data.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c deleted file mode 100644 index 12c58033d2..0000000000 --- a/arch/arm/cpu/armv7/omap4/clocks.c +++ /dev/null @@ -1,517 +0,0 @@ -/* - * - * Clock initialization for OMAP4 - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Aneesh V <aneesh@ti.com> - * - * Based on previous work by: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Rajendra Nayak <rnayak@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/omap_common.h> -#include <asm/gpio.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/utils.h> -#include <asm/omap_gpio.h> - -#ifndef CONFIG_SPL_BUILD -/* - * printing to console doesn't work unless - * this code is executed from SPL - */ -#define printf(fmt, args...) -#define puts(s) -#endif /* !CONFIG_SPL_BUILD */ - -struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100; - -const u32 sys_clk_array[8] = { - 12000000, /* 12 MHz */ - 13000000, /* 13 MHz */ - 16800000, /* 16.8 MHz */ - 19200000, /* 19.2 MHz */ - 26000000, /* 26 MHz */ - 27000000, /* 27 MHz */ - 38400000, /* 38.4 MHz */ -}; - -/* - * The M & N values in the following tables are created using the - * following tool: - * tools/omap/clocks_get_m_n.c - * Please use this tool for creating the table for any new frequency. - */ - -/* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */ -static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { - {175, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {700, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {401, 10, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {350, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {700, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {638, 34, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */ -static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {800, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {619, 12, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {800, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 5, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* dpll locked at 1200 MHz - MPU clk at 600 MHz */ -static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { - {50, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {600, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {250, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {300, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {200, 8, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ - {800, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ - {619, 12, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {125, 2, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {400, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ - {800, 26, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ - {125, 5, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { - {127, 1, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ - {762, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ - {635, 13, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {635, 15, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {381, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ - {254, 8, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ - {496, 24, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { - {200, 2, 2, 5, 8, 4, 6, 5}, /* 12 MHz */ - {800, 12, 2, 5, 8, 4, 6, 5}, /* 13 MHz */ - {619, 12, 2, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {125, 2, 2, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {400, 12, 2, 5, 8, 4, 6, 5}, /* 26 MHz */ - {800, 26, 2, 5, 8, 4, 6, 5}, /* 27 MHz */ - {125, 5, 2, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { - {64, 0, 8, 6, 12, 9, 4, 5}, /* 12 MHz */ - {768, 12, 8, 6, 12, 9, 4, 5}, /* 13 MHz */ - {320, 6, 8, 6, 12, 9, 4, 5}, /* 16.8 MHz */ - {40, 0, 8, 6, 12, 9, 4, 5}, /* 19.2 MHz */ - {384, 12, 8, 6, 12, 9, 4, 5}, /* 26 MHz */ - {256, 8, 8, 6, 12, 9, 4, 5}, /* 27 MHz */ - {20, 0, 8, 6, 12, 9, 4, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { - {931, 11, -1, -1, 4, 7, -1, -1}, /* 12 MHz */ - {931, 12, -1, -1, 4, 7, -1, -1}, /* 13 MHz */ - {665, 11, -1, -1, 4, 7, -1, -1}, /* 16.8 MHz */ - {727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */ - {931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */ - {931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */ - {291, 11, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, 1, -1, -1, -1, -1}, /* 12 MHz */ - {68, 8, 1, 1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1}, /* 26 MHz */ - {29, 7, 1, 1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1 -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */ - {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {50, 0, 2, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1}, /* 26 MHz */ - {320, 8, 2, -1, -1, -1, -1, -1}, /* 27 MHz */ - {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -void setup_post_dividers(u32 *const base, const struct dpll_params *params) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, &dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, &dpll_regs->cm_div_m3_dpll); - if (params->m4 >= 0) - writel(params->m4, &dpll_regs->cm_div_m4_dpll); - if (params->m5 >= 0) - writel(params->m5, &dpll_regs->cm_div_m5_dpll); - if (params->m6 >= 0) - writel(params->m6, &dpll_regs->cm_div_m6_dpll); - if (params->m7 >= 0) - writel(params->m7, &dpll_regs->cm_div_m7_dpll); -} - -/* - * Lock MPU dpll - * - * Resulting MPU frequencies: - * 4430 ES1.0 : 600 MHz - * 4430 ES2.x : 792 MHz (OPP Turbo) - * 4460 : 920 MHz (OPP Turbo) - DCC disabled - */ -const struct dpll_params *get_mpu_dpll_params(void) -{ - u32 omap_rev, sysclk_ind; - - omap_rev = omap_revision(); - sysclk_ind = get_sys_clk_index(); - - if (omap_rev == OMAP4430_ES1_0) - return &mpu_dpll_params_1200mhz[sysclk_ind]; - else if (omap_rev < OMAP4460_ES1_0) - return &mpu_dpll_params_1600mhz[sysclk_ind]; - else - return &mpu_dpll_params_1400mhz[sysclk_ind]; -} - -const struct dpll_params *get_core_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - - switch (omap_revision()) { - case OMAP4430_ES1_0: - return &core_dpll_params_es1_1524mhz[sysclk_ind]; - case OMAP4430_ES2_0: - case OMAP4430_SILICON_ID_INVALID: - /* safest */ - return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind]; - default: - return &core_dpll_params_1600mhz[sysclk_ind]; - } -} - - -const struct dpll_params *get_per_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &per_dpll_params_1536mhz[sysclk_ind]; -} - -const struct dpll_params *get_iva_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &iva_dpll_params_1862mhz[sysclk_ind]; -} - -const struct dpll_params *get_usb_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &usb_dpll_params_1920mhz[sysclk_ind]; -} - -const struct dpll_params *get_abe_dpll_params(void) -{ -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - u32 sysclk_ind = get_sys_clk_index(); - return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; -#else - return &abe_dpll_params_32k_196608khz; -#endif -} - -/* - * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva - * We set the maximum voltages allowed here because Smart-Reflex is not - * enabled in bootloader. Voltage initialization in the kernel will set - * these to the nominal values after enabling Smart-Reflex - */ -void scale_vcores(void) -{ - u32 volt, omap_rev; - - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - - omap_rev = omap_revision(); - - /* - * Scale Voltage rails: - * 1. VDD_CORE - * 3. VDD_MPU - * 3. VDD_IVA - */ - if (omap_rev < OMAP4460_ES1_0) { - /* - * OMAP4430: - * VDD_CORE = TWL6030 VCORE3 - * VDD_MPU = TWL6030 VCORE1 - * VDD_IVA = TWL6030 VCORE2 - */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt); - - /* - * note on VDD_MPU: - * Setting a high voltage for Nitro mode as smart reflex is not - * enabled. We use the maximum possible value in the AVS range - * because the next higher voltage in the discrete range - * (code >= 0b111010) is way too high. - */ - volt = 1325; - do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); - - } else { - /* - * OMAP4460: - * VDD_CORE = TWL6030 VCORE1 - * VDD_MPU = TPS62361 - * VDD_IVA = TWL6030 VCORE2 - */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); - /* TPS62361 */ - volt = 1203; - do_scale_tps62361(TPS62361_VSEL0_GPIO, - TPS62361_REG_ADDR_SET1, volt); - /* VCORE 2 - supplies vdd_iva */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); - } -} - -u32 get_offset_code(u32 offset) -{ - u32 offset_code, step = 12660; /* 12.66 mV represented in uV */ - - if (omap_revision() == OMAP4430_ES1_0) - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV; - else - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV; - - offset_code = (offset + step - 1) / step; - - /* The code starts at 1 not 0 */ - return ++offset_code; -} - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 *const clk_domains_essential[] = { - &prcm->cm_l4per_clkstctrl, - &prcm->cm_l3init_clkstctrl, - &prcm->cm_memif_clkstctrl, - &prcm->cm_l4cfg_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - &prcm->cm_l3_2_gpmc_clkctrl, - &prcm->cm_memif_emif_1_clkctrl, - &prcm->cm_memif_emif_2_clkctrl, - &prcm->cm_l4cfg_l4_cfg_clkctrl, - &prcm->cm_wkup_gpio1_clkctrl, - &prcm->cm_l4per_gpio2_clkctrl, - &prcm->cm_l4per_gpio3_clkctrl, - &prcm->cm_l4per_gpio4_clkctrl, - &prcm->cm_l4per_gpio5_clkctrl, - &prcm->cm_l4per_gpio6_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_wkup_gptimer1_clkctrl, - &prcm->cm_l3init_hsmmc1_clkctrl, - &prcm->cm_l3init_hsmmc2_clkctrl, - &prcm->cm_l4per_gptimer2_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_l4per_uart3_clkctrl, - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32(&prcm->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - /* Enable optional 48M functional clock for USB PHY */ - setbits_le32(&prcm->cm_l3init_usbphy_clkctrl, - USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -void enable_basic_uboot_clocks(void) -{ - u32 *const clk_domains_essential[] = { - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - &prcm->cm_l3init_hsusbotg_clkctrl, - &prcm->cm_l3init_usbphy_clkctrl, - &prcm->cm_l3init_usbphy_clkctrl, - &prcm->cm_clksel_usb_60mhz, - &prcm->cm_l3init_hsusbtll_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_l4per_mcspi1_clkctrl, - &prcm->cm_l4per_i2c1_clkctrl, - &prcm->cm_l4per_i2c2_clkctrl, - &prcm->cm_l4per_i2c3_clkctrl, - &prcm->cm_l4per_i2c4_clkctrl, - &prcm->cm_l3init_hsusbhost_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 *const clk_domains_non_essential[] = { - &prcm->cm_mpu_m3_clkstctrl, - &prcm->cm_ivahd_clkstctrl, - &prcm->cm_dsp_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sgx_clkstctrl, - &prcm->cm1_abe_clkstctrl, - &prcm->cm_c2c_clkstctrl, - &prcm->cm_cam_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sdma_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_non_essential[] = { - &prcm->cm_l3instr_l3_3_clkctrl, - &prcm->cm_l3instr_l3_instr_clkctrl, - &prcm->cm_l3instr_intrconn_wp1_clkctrl, - &prcm->cm_l3init_hsi_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_non_essential[] = { - &prcm->cm1_abe_aess_clkctrl, - &prcm->cm1_abe_pdm_clkctrl, - &prcm->cm1_abe_dmic_clkctrl, - &prcm->cm1_abe_mcasp_clkctrl, - &prcm->cm1_abe_mcbsp1_clkctrl, - &prcm->cm1_abe_mcbsp2_clkctrl, - &prcm->cm1_abe_mcbsp3_clkctrl, - &prcm->cm1_abe_slimbus_clkctrl, - &prcm->cm1_abe_timer5_clkctrl, - &prcm->cm1_abe_timer6_clkctrl, - &prcm->cm1_abe_timer7_clkctrl, - &prcm->cm1_abe_timer8_clkctrl, - &prcm->cm1_abe_wdt3_clkctrl, - &prcm->cm_l4per_gptimer9_clkctrl, - &prcm->cm_l4per_gptimer10_clkctrl, - &prcm->cm_l4per_gptimer11_clkctrl, - &prcm->cm_l4per_gptimer3_clkctrl, - &prcm->cm_l4per_gptimer4_clkctrl, - &prcm->cm_l4per_hdq1w_clkctrl, - &prcm->cm_l4per_mcbsp4_clkctrl, - &prcm->cm_l4per_mcspi2_clkctrl, - &prcm->cm_l4per_mcspi3_clkctrl, - &prcm->cm_l4per_mcspi4_clkctrl, - &prcm->cm_l4per_mmcsd3_clkctrl, - &prcm->cm_l4per_mmcsd4_clkctrl, - &prcm->cm_l4per_mmcsd5_clkctrl, - &prcm->cm_l4per_uart1_clkctrl, - &prcm->cm_l4per_uart2_clkctrl, - &prcm->cm_l4per_uart4_clkctrl, - &prcm->cm_wkup_keyboard_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_cam_iss_clkctrl, - &prcm->cm_cam_fdif_clkctrl, - &prcm->cm_dss_dss_clkctrl, - &prcm->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c new file mode 100644 index 0000000000..7551b9861e --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -0,0 +1,491 @@ +/* + * + * HW data initialization for OMAP4 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/arch/clocks.h> +#include <asm/omap_gpio.h> +#include <asm/io.h> + +struct prcm_regs const **prcm = + (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL; + +/* + * The M & N values in the following tables are created using the + * following tool: + * tools/omap/clocks_get_m_n.c + * Please use this tool for creating the table for any new frequency. + */ + +/* + * dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF + * OMAP4460 OPP_NOM frequency + */ +static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { + {175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* + * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430) + * OMAP4430 OPP_TURBO frequency + */ +static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* + * dpll locked at 1200 MHz - MPU clk at 600 MHz + * OMAP4430 OPP_NOM frequency + */ +static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { + {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4460 OPP_NOM frequency */ +static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4430 ES1 OPP_NOM frequency */ +static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { + {127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4430 ES2.X OPP_NOM frequency */ +static const struct dpll_params + core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { + {200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { + {64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 12 MHz */ + {768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 13 MHz */ + {320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 26 MHz */ + {256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 27 MHz */ + {20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { + {931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +struct dplls omap4430_dplls_es1 = { + .mpu = mpu_dpll_params_1200mhz, + .core = core_dpll_params_es1_1524mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap4430_dplls = { + .mpu = mpu_dpll_params_1200mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap4460_dplls = { + .mpu = mpu_dpll_params_1400mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct pmic_data twl6030_4430es1 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, + .step = 12660, /* 10 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, +}; + +struct pmic_data twl6030 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, + .step = 12660, /* 10 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, +}; + +struct pmic_data tps62361 = { + .base_offset = TPS62361_BASE_VOLT_MV, + .step = 10000, /* 10 mV represented in uV */ + .start_code = 0, + .gpio = TPS62361_VSEL0_GPIO, + .gpio_en = 1 +}; + +struct vcores_data omap4430_volts_es1 = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030_4430es1, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030_4430es1, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030_4430es1, +}; + +struct vcores_data omap4430_volts = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030, +}; + +struct vcores_data omap4460_volts = { + .mpu.value = 1203, + .mpu.addr = TPS62361_REG_ADDR_SET1, + .mpu.pmic = &tps62361, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE1, + .core.pmic = &tps62361, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &tps62361, +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + /* Enable optional 48M functional clock for USB PHY */ + setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl, + USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3init_hsusbotg_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_clksel_usb_60mhz, + (*prcm)->cm_l3init_hsusbtll_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + (*prcm)->cm_l4per_mcbsp4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +void hw_data_init(void) +{ + u32 omap_rev = omap_revision(); + + (*prcm) = &omap4_prcm; + + switch (omap_rev) { + + case OMAP4430_ES1_0: + *dplls_data = &omap4430_dplls_es1; + *omap_vcores = &omap4430_volts_es1; + break; + + case OMAP4430_ES2_0: + case OMAP4430_ES2_1: + case OMAP4430_ES2_2: + case OMAP4430_ES2_3: + *dplls_data = &omap4430_dplls; + *omap_vcores = &omap4430_volts; + break; + + case OMAP4460_ES1_0: + case OMAP4460_ES1_1: + *dplls_data = &omap4460_dplls; + *omap_vcores = &omap4460_volts; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } + + *ctrl = &omap4_ctrl; +} diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index f4123aaffc..2db517b1bf 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -57,10 +57,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; void do_io_settings(void) { u32 lpddr2io; - struct control_lpddr2io_regs *lpddr2io_regs = - (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE; u32 omap4_rev = omap_revision(); @@ -72,20 +68,20 @@ void do_io_settings(void) lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; /* EMIF1 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1); + writel(lpddr2io, (*ctrl)->control_lpddr2io1_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io1_1); /* No pull for GR10 as per hw team's recommendation */ writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io1_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3); + (*ctrl)->control_lpddr2io1_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3); /* EMIF2 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1); + writel(lpddr2io, (*ctrl)->control_lpddr2io2_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io2_1); /* No pull for GR10 as per hw team's recommendation */ writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io2_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3); + (*ctrl)->control_lpddr2io2_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3); /* * Some of these settings (TRIM values) come from eFuse and are @@ -93,16 +89,16 @@ void do_io_settings(void) * calibration of the device. Do the software over-ride only if * the device is not correctly trimmed */ - if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) { + if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) { writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_iva_voltage_ctrl); + (*ctrl)->control_ldosram_iva_voltage_ctrl); writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_mpu_voltage_ctrl); + (*ctrl)->control_ldosram_mpu_voltage_ctrl); writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_core_voltage_ctrl); + (*ctrl)->control_ldosram_core_voltage_ctrl); } /* @@ -110,11 +106,11 @@ void do_io_settings(void) * i. unconditionally for all 4430 * ii. only if un-trimmed for 4460 */ - if (!readl(&ctrl->control_efuse_1)) - writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1); + if (!readl((*ctrl)->control_efuse_1)) + writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1); - if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2)) - writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2); + if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2)) + writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2); } #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c new file mode 100644 index 0000000000..7225a301b1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c @@ -0,0 +1,315 @@ +/* + * + * HW regs data for OMAP4 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/omap_common.h> + +struct prcm_regs const omap4_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_m4_dpll_core = 0x4a004138, + .cm_div_m5_dpll_core = 0x4a00413c, + .cm_div_m6_dpll_core = 0x4a004140, + .cm_div_m7_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_emu_override_dpll_core = 0x4a004150, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_m4_dpll_iva = 0x4a0041b8, + .cm_div_m5_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_m4_dpll_ddrphy = 0x4a004238, + .cm_div_m5_dpll_ddrphy = 0x4a00423c, + .cm_div_m6_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_m4_dpll_per = 0x4a008158, + .cm_div_m5_dpll_per = 0x4a00815c, + .cm_div_m6_dpll_per = 0x4a008160, + .cm_div_m7_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkct = 0x4a008e40, + .cm_ivahd_clkstctrl = 0x4a008f00, + + /* cm2.ivahd */ + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_iss_clkctrl = 0x4a009020, + .cm_cam_fdif_clkctrl = 0x4a009028, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsi_clkctrl = 0x4a009338, + .cm_l3init_hsusbhost_clkctrl = 0x4a009358, + .cm_l3init_hsusbotg_clkctrl = 0x4a009360, + .cm_l3init_hsusbtll_clkctrl = 0x4a009368, + .cm_l3init_p1500_clkctrl = 0x4a009378, + .cm_l3init_fsusb_clkctrl = 0x4a0093d0, + .cm_l3init_usbphy_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009400, + .cm_l4per_dynamicdep = 0x4a009408, + .cm_l4per_adc_clkctrl = 0x4a009420, + .cm_l4per_gptimer10_clkctrl = 0x4a009428, + .cm_l4per_gptimer11_clkctrl = 0x4a009430, + .cm_l4per_gptimer2_clkctrl = 0x4a009438, + .cm_l4per_gptimer3_clkctrl = 0x4a009440, + .cm_l4per_gptimer4_clkctrl = 0x4a009448, + .cm_l4per_gptimer9_clkctrl = 0x4a009450, + .cm_l4per_elm_clkctrl = 0x4a009458, + .cm_l4per_gpio2_clkctrl = 0x4a009460, + .cm_l4per_gpio3_clkctrl = 0x4a009468, + .cm_l4per_gpio4_clkctrl = 0x4a009470, + .cm_l4per_gpio5_clkctrl = 0x4a009478, + .cm_l4per_gpio6_clkctrl = 0x4a009480, + .cm_l4per_hdq1w_clkctrl = 0x4a009488, + .cm_l4per_hecc1_clkctrl = 0x4a009490, + .cm_l4per_hecc2_clkctrl = 0x4a009498, + .cm_l4per_i2c1_clkctrl = 0x4a0094a0, + .cm_l4per_i2c2_clkctrl = 0x4a0094a8, + .cm_l4per_i2c3_clkctrl = 0x4a0094b0, + .cm_l4per_i2c4_clkctrl = 0x4a0094b8, + .cm_l4per_l4per_clkctrl = 0x4a0094c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, + .cm_l4per_mcbsp4_clkctrl = 0x4a0094e0, + .cm_l4per_mgate_clkctrl = 0x4a0094e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009500, + .cm_l4per_mcspi4_clkctrl = 0x4a009508, + .cm_l4per_mmcsd3_clkctrl = 0x4a009520, + .cm_l4per_mmcsd4_clkctrl = 0x4a009528, + .cm_l4per_msprohg_clkctrl = 0x4a009530, + .cm_l4per_slimbus2_clkctrl = 0x4a009538, + .cm_l4per_uart1_clkctrl = 0x4a009540, + .cm_l4per_uart2_clkctrl = 0x4a009548, + .cm_l4per_uart3_clkctrl = 0x4a009550, + .cm_l4per_uart4_clkctrl = 0x4a009558, + .cm_l4per_mmcsd5_clkctrl = 0x4a009560, + .cm_l4per_i2c5_clkctrl = 0x4a009568, + .cm_l4sec_clkstctrl = 0x4a009580, + .cm_l4sec_staticdep = 0x4a009584, + .cm_l4sec_dynamicdep = 0x4a009588, + .cm_l4sec_aes1_clkctrl = 0x4a0095a0, + .cm_l4sec_aes2_clkctrl = 0x4a0095a8, + .cm_l4sec_des3des_clkctrl = 0x4a0095b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, + .cm_l4sec_rng_clkctrl = 0x4a0095c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4a30610c, + .cm_sys_clksel = 0x4a306110, + .cm_wkup_clkstctrl = 0x4a307800, + .cm_wkup_l4wkup_clkctrl = 0x4a307820, + .cm_wkup_wdtimer1_clkctrl = 0x4a307828, + .cm_wkup_wdtimer2_clkctrl = 0x4a307830, + .cm_wkup_gpio1_clkctrl = 0x4a307838, + .cm_wkup_gptimer1_clkctrl = 0x4a307840, + .cm_wkup_gptimer12_clkctrl = 0x4a307848, + .cm_wkup_synctimer_clkctrl = 0x4a307850, + .cm_wkup_usim_clkctrl = 0x4a307858, + .cm_wkup_sarram_clkctrl = 0x4a307860, + .cm_wkup_keyboard_clkctrl = 0x4a307878, + .cm_wkup_rtc_clkctrl = 0x4a307880, + .cm_wkup_bandgap_clkctrl = 0x4a307888, + .prm_vc_val_bypass = 0x4a307ba0, + .prm_vc_cfg_channel = 0x4a307ba4, + .prm_vc_cfg_i2c_mode = 0x4a307ba8, + .prm_vc_cfg_i2c_clk = 0x4a307bac, +}; + +struct omap_sys_ctrl_regs const omap4_ctrl = { + .control_id_code = 0x4A002204, + .control_std_fuse_opp_bgap = 0x4a002260, + .control_status = 0x4a0022c4, + .control_ldosram_iva_voltage_ctrl = 0x4A002320, + .control_ldosram_mpu_voltage_ctrl = 0x4A002324, + .control_ldosram_core_voltage_ctrl = 0x4A002328, + .control_pbiaslite = 0x4A100600, + .control_lpddr2io1_0 = 0x4A100638, + .control_lpddr2io1_1 = 0x4A10063C, + .control_lpddr2io1_2 = 0x4A100640, + .control_lpddr2io1_3 = 0x4A100644, + .control_lpddr2io2_0 = 0x4A100648, + .control_lpddr2io2_1 = 0x4A10064C, + .control_lpddr2io2_2 = 0x4A100650, + .control_lpddr2io2_3 = 0x4A100654, + .control_efuse_1 = 0x4A100700, + .control_efuse_2 = 0x4A100704, +}; diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c index b9128faa56..20fc55216a 100644 --- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c +++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c @@ -90,21 +90,28 @@ const struct emif_regs emif_regs_elpida_400_mhz_2cs = { .emif_ddr_phy_ctlr_1 = 0x049ff418 }; -/* Dummy registers for OMAP44xx */ -const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; - const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { .dmm_lisa_map_0 = 0xFF020100, .dmm_lisa_map_1 = 0, .dmm_lisa_map_2 = 0, - .dmm_lisa_map_3 = 0x80540300 + .dmm_lisa_map_3 = 0x80540300, + .is_ma_present = 0x0 }; const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = { .dmm_lisa_map_0 = 0xFF020100, .dmm_lisa_map_1 = 0, .dmm_lisa_map_2 = 0, - .dmm_lisa_map_3 = 0x80640300 + .dmm_lisa_map_3 = 0x80640300, + .is_ma_present = 0x0 +}; + +const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = { + .dmm_lisa_map_0 = 0xFF020100, + .dmm_lisa_map_1 = 0, + .dmm_lisa_map_2 = 0, + .dmm_lisa_map_3 = 0x80640300, + .is_ma_present = 0x1 }; static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) @@ -129,8 +136,10 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs if (omap_rev == OMAP4430_ES1_0) *dmm_lisa_regs = &lisa_map_2G_x_1_x_2; - else + else if (omap_rev < OMAP4460_ES1_0) *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; + else + *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2; } void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) @@ -284,3 +293,16 @@ void emif_get_device_timings(u32 emif_nr, __attribute__((weak, alias("emif_get_device_timings_sdp"))); #endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ + +const struct lpddr2_mr_regs mr_regs = { + .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3, + .mr2 = 0x4, + .mr3 = -1, + .mr10 = MR10_ZQ_ZQINIT, + .mr16 = MR16_REF_FULL_ARRAY +}; + +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) +{ + *regs = &mr_regs; +} diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index 9b261c4df2..ce00e2c3c5 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -26,9 +26,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS += hwinit.o -COBJS += clocks.o COBJS += emif.o COBJS += sdram.o +COBJS += prcm-regs.o +COBJS += hw_data.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c deleted file mode 100644 index eecfbade35..0000000000 --- a/arch/arm/cpu/armv7/omap5/clocks.c +++ /dev/null @@ -1,494 +0,0 @@ -/* - * - * Clock initialization for OMAP5 - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Aneesh V <aneesh@ti.com> - * Sricharan R <r.sricharan@ti.com> - * - * Based on previous work by: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Rajendra Nayak <rnayak@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/omap_common.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/utils.h> -#include <asm/omap_gpio.h> - -#ifndef CONFIG_SPL_BUILD -/* - * printing to console doesn't work unless - * this code is executed from SPL - */ -#define printf(fmt, args...) -#define puts(s) -#endif - -struct omap5_prcm_regs *const prcm = (struct omap5_prcm_regs *)0x4A004100; - -const u32 sys_clk_array[8] = { - 12000000, /* 12 MHz */ - 0, /* NA */ - 16800000, /* 16.8 MHz */ - 19200000, /* 19.2 MHz */ - 26000000, /* 26 MHz */ - 0, /* NA */ - 38400000, /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { - {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {625, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 7, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {750, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 15, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = { - {500, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 11, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { - {275, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {550, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { - {200, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = { - {275, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {550, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { - {266, 2, 2, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {570, 8, 2, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */ - {665, 11, 2, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */ - {532, 12, 2, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {665, 23, 2, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { - {266, 2, 4, 5, 8, 8, 62, 10, 10, 14}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {570, 8, 4, 5, 8, 8, 62, 10, 10, 14}, /* 16.8 MHz */ - {665, 11, 4, 5, 8, 8, 62, 10, 10, 14}, /* 19.2 MHz */ - {532, 12, 4, 8, 8, 8, 62, 10, 10, 14}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {665, 23, 4, 8, 8, 8, 62, 10, 10, 14} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { - {32, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {160, 6, 4, 3, 6, 4, -1, 2, -1, -1}, /* 16.8 MHz */ - {20, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 19.2 MHz */ - {192, 12, 4, 3, 6, 4, -1, 2, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {10, 0, 4, 3, 6, 4, -1, 2, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { - {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {2011, 28, -1, -1, 5, 6, -1, -1, -1, -1}, /* 16.8 MHz */ - {1881, 30, -1, -1, 5, 6, -1, -1, -1, -1}, /* 19.2 MHz */ - {1165, 25, -1, -1, 5, 6, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1972, 64, -1, -1, 5, 6, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1, -1, -1 -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {400, 4, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {400, 7, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {400, 15, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -void setup_post_dividers(u32 *const base, const struct dpll_params *params) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, &dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, &dpll_regs->cm_div_m3_dpll); - if (params->h11 >= 0) - writel(params->h11, &dpll_regs->cm_div_h11_dpll); - if (params->h12 >= 0) - writel(params->h12, &dpll_regs->cm_div_h12_dpll); - if (params->h13 >= 0) - writel(params->h13, &dpll_regs->cm_div_h13_dpll); - if (params->h14 >= 0) - writel(params->h14, &dpll_regs->cm_div_h14_dpll); - if (params->h22 >= 0) - writel(params->h22, &dpll_regs->cm_div_h22_dpll); - if (params->h23 >= 0) - writel(params->h23, &dpll_regs->cm_div_h23_dpll); -} - -const struct dpll_params *get_mpu_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &mpu_dpll_params_800mhz[sysclk_ind]; -} - -const struct dpll_params *get_core_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - - /* Configuring the DDR to be at 532mhz */ - return &core_dpll_params_2128mhz_ddr532[sysclk_ind]; -} - -const struct dpll_params *get_per_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &per_dpll_params_768mhz[sysclk_ind]; -} - -const struct dpll_params *get_iva_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &iva_dpll_params_2330mhz[sysclk_ind]; -} - -const struct dpll_params *get_usb_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &usb_dpll_params_1920mhz[sysclk_ind]; -} - -const struct dpll_params *get_abe_dpll_params(void) -{ -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - u32 sysclk_ind = get_sys_clk_index(); - return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; -#else - return &abe_dpll_params_32k_196608khz; -#endif -} - -/* - * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva - * We set the maximum voltages allowed here because Smart-Reflex is not - * enabled in bootloader. Voltage initialization in the kernel will set - * these to the nominal values after enabling Smart-Reflex - */ -void scale_vcores(void) -{ - u32 volt_core, volt_mpu, volt_mm; - - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - - /* Palmas settings */ - if (omap_revision() != OMAP5432_ES1_0) { - volt_core = VDD_CORE; - volt_mpu = VDD_MPU; - volt_mm = VDD_MM; - } else { - volt_core = VDD_CORE_5432; - volt_mpu = VDD_MPU_5432; - volt_mm = VDD_MM_5432; - } - - do_scale_vcore(SMPS_REG_ADDR_8_CORE, volt_core); - do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt_mpu); - do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt_mm); - - if (omap_revision() == OMAP5432_ES1_0) { - /* Configure LDO SRAM "magic" bits */ - writel(2, &prcm->prm_sldo_core_setup); - writel(2, &prcm->prm_sldo_mpu_setup); - writel(2, &prcm->prm_sldo_mm_setup); - } -} - -u32 get_offset_code(u32 volt_offset) -{ - u32 offset_code, step = 10000; /* 10 mV represented in uV */ - - volt_offset -= PALMAS_SMPS_BASE_VOLT_UV; - - offset_code = (volt_offset + step - 1) / step; - - /* - * Offset codes 1-6 all give the base voltage in Palmas - * Offset code 0 switches OFF the SMPS - */ - return offset_code + 6; -} - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 *const clk_domains_essential[] = { - &prcm->cm_l4per_clkstctrl, - &prcm->cm_l3init_clkstctrl, - &prcm->cm_memif_clkstctrl, - &prcm->cm_l4cfg_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - &prcm->cm_l3_2_gpmc_clkctrl, - &prcm->cm_memif_emif_1_clkctrl, - &prcm->cm_memif_emif_2_clkctrl, - &prcm->cm_l4cfg_l4_cfg_clkctrl, - &prcm->cm_wkup_gpio1_clkctrl, - &prcm->cm_l4per_gpio2_clkctrl, - &prcm->cm_l4per_gpio3_clkctrl, - &prcm->cm_l4per_gpio4_clkctrl, - &prcm->cm_l4per_gpio5_clkctrl, - &prcm->cm_l4per_gpio6_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_wkup_gptimer1_clkctrl, - &prcm->cm_l3init_hsmmc1_clkctrl, - &prcm->cm_l3init_hsmmc2_clkctrl, - &prcm->cm_l4per_gptimer2_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_l4per_uart3_clkctrl, - &prcm->cm_l4per_i2c1_clkctrl, - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32(&prcm->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Set the correct clock dividers for mmc */ - setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); - - /* Select 384Mhz for GPU as its the POR for ES1.0 */ - setbits_le32(&prcm->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_HYD_GCLK_MASK); - setbits_le32(&prcm->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_CORE_GCLK_MASK); - - /* Enable SCRM OPT clocks for PER and CORE dpll */ - setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_PER_MASK); - setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_CORE_MASK); -} - -void enable_basic_uboot_clocks(void) -{ - u32 *const clk_domains_essential[] = { - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_l4per_mcspi1_clkctrl, - &prcm->cm_l4per_i2c2_clkctrl, - &prcm->cm_l4per_i2c3_clkctrl, - &prcm->cm_l4per_i2c4_clkctrl, - &prcm->cm_l3init_hsusbtll_clkctrl, - &prcm->cm_l3init_hsusbhost_clkctrl, - &prcm->cm_l3init_fsusb_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 *const clk_domains_non_essential[] = { - &prcm->cm_mpu_m3_clkstctrl, - &prcm->cm_ivahd_clkstctrl, - &prcm->cm_dsp_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sgx_clkstctrl, - &prcm->cm1_abe_clkstctrl, - &prcm->cm_c2c_clkstctrl, - &prcm->cm_cam_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sdma_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_non_essential[] = { - &prcm->cm_mpu_m3_mpu_m3_clkctrl, - &prcm->cm_ivahd_ivahd_clkctrl, - &prcm->cm_ivahd_sl2_clkctrl, - &prcm->cm_dsp_dsp_clkctrl, - &prcm->cm_l3instr_l3_3_clkctrl, - &prcm->cm_l3instr_l3_instr_clkctrl, - &prcm->cm_l3instr_intrconn_wp1_clkctrl, - &prcm->cm_l3init_hsi_clkctrl, - &prcm->cm_l4per_hdq1w_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_non_essential[] = { - &prcm->cm1_abe_aess_clkctrl, - &prcm->cm1_abe_pdm_clkctrl, - &prcm->cm1_abe_dmic_clkctrl, - &prcm->cm1_abe_mcasp_clkctrl, - &prcm->cm1_abe_mcbsp1_clkctrl, - &prcm->cm1_abe_mcbsp2_clkctrl, - &prcm->cm1_abe_mcbsp3_clkctrl, - &prcm->cm1_abe_slimbus_clkctrl, - &prcm->cm1_abe_timer5_clkctrl, - &prcm->cm1_abe_timer6_clkctrl, - &prcm->cm1_abe_timer7_clkctrl, - &prcm->cm1_abe_timer8_clkctrl, - &prcm->cm1_abe_wdt3_clkctrl, - &prcm->cm_l4per_gptimer9_clkctrl, - &prcm->cm_l4per_gptimer10_clkctrl, - &prcm->cm_l4per_gptimer11_clkctrl, - &prcm->cm_l4per_gptimer3_clkctrl, - &prcm->cm_l4per_gptimer4_clkctrl, - &prcm->cm_l4per_mcspi2_clkctrl, - &prcm->cm_l4per_mcspi3_clkctrl, - &prcm->cm_l4per_mcspi4_clkctrl, - &prcm->cm_l4per_mmcsd3_clkctrl, - &prcm->cm_l4per_mmcsd4_clkctrl, - &prcm->cm_l4per_mmcsd5_clkctrl, - &prcm->cm_l4per_uart1_clkctrl, - &prcm->cm_l4per_uart2_clkctrl, - &prcm->cm_l4per_uart4_clkctrl, - &prcm->cm_wkup_keyboard_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_cam_iss_clkctrl, - &prcm->cm_cam_fdif_clkctrl, - &prcm->cm_dss_dss_clkctrl, - &prcm->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c new file mode 100644 index 0000000000..ced274e4db --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -0,0 +1,596 @@ +/* + * + * HW data initialization for OMAP5 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/arch/clocks.h> +#include <asm/omap_gpio.h> +#include <asm/io.h> +#include <asm/emif.h> + +struct prcm_regs const **prcm = + (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL; + +/* OPP HIGH FREQUENCY for ES2.0 */ +static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { + {125, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {625, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {750, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP NOM FREQUENCY for ES2.0, OPP HIGH for ES1.0 */ +static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { + {275, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {550, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP NOM FREQUENCY for ES1.0 */ +static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP LOW FREQUENCY for ES1.0 */ +static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { + {200, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP LOW FREQUENCY for ES2.0 */ +static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = { + {499, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {297, 9, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {493, 18, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {499, 25, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {493, 37, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = { + {250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ + {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */ + {277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */ + {368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 16.8 MHz */ + {277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 19.2 MHz */ + {368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = { + {266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 16.8 MHz */ + {277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 19.2 MHz */ + {368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 38.4 MHz */ + {266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6} /* 20 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { + {266, 2, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 16.8 MHz */ + {277, 4, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 19.2 MHz */ + {368, 8, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266_es2[NUM_SYS_CLKS] = { + {266, 2, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 16.8 MHz */ + {277, 4, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 19.2 MHz */ + {368, 8, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = { + {32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */ + {96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1} /* 20 MHz */ +}; + +static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { + {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ + {48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ +}; + +static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = { + {533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ + {533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ +}; + +struct dplls omap5_dplls_es1 = { + .mpu = mpu_dpll_params_800mhz, + .core = core_dpll_params_2128mhz_ddr532, + .per = per_dpll_params_768mhz, + .iva = iva_dpll_params_2330mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap5_dplls_es2 = { + .mpu = mpu_dpll_params_1100mhz, + .core = core_dpll_params_2128mhz_ddr532_es2, + .per = per_dpll_params_768mhz_es2, + .iva = iva_dpll_params_2330mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls dra7xx_dplls = { + .mpu = mpu_dpll_params_1ghz, + .core = core_dpll_params_2128mhz_ddr532_dra7xx, + .per = per_dpll_params_768mhz_dra7xx, + .usb = usb_dpll_params_1920mhz, + .ddr = ddr_dpll_params_1066mhz, +}; + +struct pmic_data palmas = { + .base_offset = PALMAS_SMPS_BASE_VOLT_UV, + .step = 10000, /* 10 mV represented in uV */ + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + .start_code = 6, +}; + +struct vcores_data omap5430_volts = { + .mpu.value = VDD_MPU, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + +struct vcores_data omap5430_volts_es2 = { + .mpu.value = VDD_MPU_ES2, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE_ES2, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM_ES2, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Set the correct clock dividers for mmc */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); + + /* Select 384Mhz for GPU as its the POR for ES1.0 */ + setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, + CLKSEL_GPU_HYD_GCLK_MASK); + setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, + CLKSEL_GPU_CORE_GCLK_MASK); + + /* Enable SCRM OPT clocks for PER and CORE dpll */ + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_PER_MASK); + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_CORE_MASK); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l3init_hsusbtll_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + (*prcm)->cm_l3init_fsusb_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_mpu_m3_mpu_m3_clkctrl, + (*prcm)->cm_ivahd_ivahd_clkctrl, + (*prcm)->cm_ivahd_sl2_clkctrl, + (*prcm)->cm_dsp_dsp_clkctrl, + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +const struct ctrl_ioregs ioregs_omap5430 = { + .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, + .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, + .ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, + .ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, + .ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, +}; + +const struct ctrl_ioregs ioregs_omap5432_es1 = { + .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_lpddr2ch = 0x0, + .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE, + .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, +}; + +const struct ctrl_ioregs ioregs_omap5432_es2 = { + .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, + .ctrl_lpddr2ch = 0x0, + .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, + .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, +}; + +void hw_data_init(void) +{ + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + + case OMAP5430_ES1_0: + case OMAP5432_ES1_0: + *prcm = &omap5_es1_prcm; + *dplls_data = &omap5_dplls_es1; + *omap_vcores = &omap5430_volts; + *ctrl = &omap5_ctrl; + break; + + case OMAP5430_ES2_0: + case OMAP5432_ES2_0: + *prcm = &omap5_es2_prcm; + *dplls_data = &omap5_dplls_es2; + *omap_vcores = &omap5430_volts_es2; + *ctrl = &omap5_ctrl; + break; + + case DRA752_ES1_0: + *prcm = &dra7xx_prcm; + *dplls_data = &dra7xx_dplls; + *omap_vcores = &omap5430_volts_es2; + *ctrl = &dra7xx_ctrl; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } +} + +void get_ioregs(const struct ctrl_ioregs **regs) +{ + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + *regs = &ioregs_omap5430; + break; + case OMAP5432_ES1_0: + *regs = &ioregs_omap5432_es1; + break; + case OMAP5432_ES2_0: + case DRA752_ES1_0: + *regs = &ioregs_omap5432_es2; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } +} diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index d0c3ff7021..2f4b24752b 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -32,6 +32,7 @@ #include <asm/armv7.h> #include <asm/arch/cpu.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/clocks.h> #include <asm/sizes.h> #include <asm/utils.h> #include <asm/arch/gpio.h> @@ -56,76 +57,58 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; /* LPDDR2 specific IO settings */ static void io_settings_lpddr2(void) { - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_1)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_1)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_1)); - writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, - &(ioregs_base->control_ddrio_0)); - writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, - &(ioregs_base->control_ddrio_1)); - writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, - &(ioregs_base->control_ddrio_2)); + const struct ctrl_ioregs *ioregs; + + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); } /* DDR3 specific IO settings */ static void io_settings_ddr3(void) { u32 io_settings = 0; - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddr3ch1_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch1_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch1_1)); - - writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddr3ch2_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch2_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch2_1)); - - writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_0)); - writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_1)); - writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_2)); + const struct ctrl_ioregs *ioregs; + + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); /* omap5432 does not use lpddr2 */ - writel(0x0, &(ioregs_base->control_lpddr2ch1_0)); - writel(0x0, &(ioregs_base->control_lpddr2ch1_1)); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); - writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - &(ioregs_base->control_emif1_sdram_config_ext)); - writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - &(ioregs_base->control_emif2_sdram_config_ext)); + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif1_sdram_config_ext); + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif2_sdram_config_ext); /* Disable DLL select */ - io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config)) + io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) & 0xFFEFFFFF); writel(io_settings, - &(ioregs_base->control_port_emif1_sdram_config)); + (*ctrl)->control_port_emif1_sdram_config); - io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config)) + io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) & 0xFFEFFFFF); writel(io_settings, - &(ioregs_base->control_port_emif2_sdram_config)); + (*ctrl)->control_port_emif2_sdram_config); } /* @@ -134,88 +117,198 @@ static void io_settings_ddr3(void) void do_io_settings(void) { u32 io_settings = 0, mask = 0; - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; /* Impedance settings EMMC, C2C 1,2, hsi2 */ mask = (ds_mask << 2) | (ds_mask << 8) | (ds_mask << 16) | (ds_mask << 18); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_0) & (~mask); io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) | (ds_45_ohm << 18) | (ds_60_ohm << 2); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_0)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_0); /* Impedance settings Mcspi2 */ mask = (ds_mask << 30); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_1) & (~mask); io_settings |= (ds_60_ohm << 30); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_1); /* Impedance settings C2C 3,4 */ mask = (ds_mask << 14) | (ds_mask << 16); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_2) & (~mask); io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_2)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_2); /* Slew rate settings EMMC, C2C 1,2 */ mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_0) & (~mask); io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_0)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_0); /* Slew rate settings hsi2, Mcspi2 */ mask = (sc_mask << 24) | (sc_mask << 28); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_1) & (~mask); io_settings |= (sc_fast << 28) | (sc_fast << 24); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_1); /* Slew rate settings C2C 3,4 */ mask = (sc_mask << 16) | (sc_mask << 18); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_2) & (~mask); io_settings |= (sc_na << 16) | (sc_na << 18); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_2)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_2); /* impedance and slew rate settings for usb */ mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) | (usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14); - io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart3io_padconf_1) & (~mask); io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) | (ds_60_ohm << 23) | (sc_fast << 20) | (sc_fast << 17) | (sc_fast << 14); - writel(io_settings, &(ioregs_base->control_smart3io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart3io_padconf_1); - if (omap_revision() <= OMAP5430_ES1_0) + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) io_settings_lpddr2(); else io_settings_ddr3(); /* Efuse settings */ - writel(EFUSE_1, &(ioregs_base->control_efuse_1)); - writel(EFUSE_2, &(ioregs_base->control_efuse_2)); - writel(EFUSE_3, &(ioregs_base->control_efuse_3)); - writel(EFUSE_4, &(ioregs_base->control_efuse_4)); + writel(EFUSE_1, (*ctrl)->control_efuse_1); + writel(EFUSE_2, (*ctrl)->control_efuse_2); + writel(EFUSE_3, (*ctrl)->control_efuse_3); + writel(EFUSE_4, (*ctrl)->control_efuse_4); +} + +static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = { + {0x45, 0x1}, /* 12 MHz */ + {-1, -1}, /* 13 MHz */ + {0x63, 0x2}, /* 16.8 MHz */ + {0x57, 0x2}, /* 19.2 MHz */ + {0x20, 0x1}, /* 26 MHz */ + {-1, -1}, /* 27 MHz */ + {0x41, 0x3} /* 38.4 MHz */ +}; + +void srcomp_enable(void) +{ + u32 srcomp_value, mul_factor, div_factor, clk_val, i; + u32 sysclk_ind = get_sys_clk_index(); + u32 omap_rev = omap_revision(); + + mul_factor = srcomp_parameters[sysclk_ind].multiply_factor; + div_factor = srcomp_parameters[sysclk_ind].divide_factor; + + for (i = 0; i < 4; i++) { + srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= + ~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK); + srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | + (div_factor << DIVIDE_FACTOR_XS_SHIFT); + writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4); + } + + if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) { + clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); + + for (i = 0; i < 4; i++) { + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~PWRDWN_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + + while (((readl((*ctrl)->control_srcomp_north_side + i*4) + & SRCODE_READ_XS_MASK) >> + SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + } else { + srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK | + DIVIDE_FACTOR_XS_MASK); + srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | + (div_factor << DIVIDE_FACTOR_XS_SHIFT); + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + for (i = 0; i < 4; i++) { + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); + + clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl); + + for (i = 0; i < 4; i++) { + while (((readl((*ctrl)->control_srcomp_north_side + i*4) + & SRCODE_READ_XS_MASK) >> + SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + + while (((readl((*ctrl)->control_srcomp_east_side_wkup) & + SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + } } #endif void config_data_eye_leveling_samples(u32 emif_base) { - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - /*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/ if (emif_base == EMIF1_BASE) writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, - &(ioregs_base->control_emif1_sdram_config_ext)); + (*ctrl)->control_emif1_sdram_config_ext); else if (emif_base == EMIF2_BASE) writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, - &(ioregs_base->control_emif2_sdram_config_ext)); + (*ctrl)->control_emif2_sdram_config_ext); } void init_omap_revision(void) @@ -227,17 +320,25 @@ void init_omap_revision(void) */ unsigned int rev = cortex_rev(); - switch (rev) { - case MIDR_CORTEX_A15_R0P0: - switch (readl(CONTROL_ID_CODE)) { - case OMAP5430_CONTROL_ID_CODE_ES1_0: - *omap_si_rev = OMAP5430_ES1_0; - break; - case OMAP5432_CONTROL_ID_CODE_ES1_0: - default: - *omap_si_rev = OMAP5432_ES1_0; - break; - } + switch (readl(CONTROL_ID_CODE)) { + case OMAP5430_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP5430_ES1_0; + if (rev == MIDR_CORTEX_A15_R2P2) + *omap_si_rev = OMAP5430_ES2_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP5432_ES1_0; + if (rev == MIDR_CORTEX_A15_R2P2) + *omap_si_rev = OMAP5432_ES2_0; + break; + case OMAP5430_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP5430_ES2_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP5432_ES2_0; + break; + case DRA752_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = DRA752_ES1_0; break; default: *omap_si_rev = OMAP5430_SILICON_ID_INVALID; @@ -253,7 +354,12 @@ void reset_cpu(ulong ignored) * So use cold reset in case instead. */ if (omap_rev == OMAP5430_ES1_0) - writel(PRM_RSTCTRL_RESET << 0x1, PRM_RSTCTRL); + writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl); else - writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL); + writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl); +} + +u32 warm_reset(void) +{ + return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK; } diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c new file mode 100644 index 0000000000..b8a61fe881 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -0,0 +1,958 @@ +/* + * + * HW regs data for OMAP5 Soc + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/omap_common.h> + +struct prcm_regs const omap5_es1_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_h11_dpll_core = 0x4a004138, + .cm_div_h12_dpll_core = 0x4a00413c, + .cm_div_h13_dpll_core = 0x4a004140, + .cm_div_h14_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_emu_override_dpll_core = 0x4a004150, + .cm_div_h22_dpllcore = 0x4a004154, + .cm_div_h23_dpll_core = 0x4a004158, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_h11_dpll_iva = 0x4a0041b8, + .cm_div_h12_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_h11_dpll_ddrphy = 0x4a004238, + .cm_div_h12_dpll_ddrphy = 0x4a00423c, + .cm_div_h13_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + + /* cm2.core */ + .cm_coreaon_bandgap_clkctrl = 0x4a008648, + .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a008f00, + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_iss_clkctrl = 0x4a009020, + .cm_cam_fdif_clkctrl = 0x4a009028, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsi_clkctrl = 0x4a009338, + .cm_l3init_hsusbhost_clkctrl = 0x4a009358, + .cm_l3init_hsusbotg_clkctrl = 0x4a009360, + .cm_l3init_hsusbtll_clkctrl = 0x4a009368, + .cm_l3init_p1500_clkctrl = 0x4a009378, + .cm_l3init_fsusb_clkctrl = 0x4a0093d0, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009400, + .cm_l4per_dynamicdep = 0x4a009408, + .cm_l4per_adc_clkctrl = 0x4a009420, + .cm_l4per_gptimer10_clkctrl = 0x4a009428, + .cm_l4per_gptimer11_clkctrl = 0x4a009430, + .cm_l4per_gptimer2_clkctrl = 0x4a009438, + .cm_l4per_gptimer3_clkctrl = 0x4a009440, + .cm_l4per_gptimer4_clkctrl = 0x4a009448, + .cm_l4per_gptimer9_clkctrl = 0x4a009450, + .cm_l4per_elm_clkctrl = 0x4a009458, + .cm_l4per_gpio2_clkctrl = 0x4a009460, + .cm_l4per_gpio3_clkctrl = 0x4a009468, + .cm_l4per_gpio4_clkctrl = 0x4a009470, + .cm_l4per_gpio5_clkctrl = 0x4a009478, + .cm_l4per_gpio6_clkctrl = 0x4a009480, + .cm_l4per_hdq1w_clkctrl = 0x4a009488, + .cm_l4per_hecc1_clkctrl = 0x4a009490, + .cm_l4per_hecc2_clkctrl = 0x4a009498, + .cm_l4per_i2c1_clkctrl = 0x4a0094a0, + .cm_l4per_i2c2_clkctrl = 0x4a0094a8, + .cm_l4per_i2c3_clkctrl = 0x4a0094b0, + .cm_l4per_i2c4_clkctrl = 0x4a0094b8, + .cm_l4per_l4per_clkctrl = 0x4a0094c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, + .cm_l4per_mgate_clkctrl = 0x4a0094e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009500, + .cm_l4per_mcspi4_clkctrl = 0x4a009508, + .cm_l4per_gpio7_clkctrl = 0x4a009510, + .cm_l4per_gpio8_clkctrl = 0x4a009518, + .cm_l4per_mmcsd3_clkctrl = 0x4a009520, + .cm_l4per_mmcsd4_clkctrl = 0x4a009528, + .cm_l4per_msprohg_clkctrl = 0x4a009530, + .cm_l4per_slimbus2_clkctrl = 0x4a009538, + .cm_l4per_uart1_clkctrl = 0x4a009540, + .cm_l4per_uart2_clkctrl = 0x4a009548, + .cm_l4per_uart3_clkctrl = 0x4a009550, + .cm_l4per_uart4_clkctrl = 0x4a009558, + .cm_l4per_mmcsd5_clkctrl = 0x4a009560, + .cm_l4per_i2c5_clkctrl = 0x4a009568, + .cm_l4per_uart5_clkctrl = 0x4a009570, + .cm_l4per_uart6_clkctrl = 0x4a009578, + .cm_l4sec_clkstctrl = 0x4a009580, + .cm_l4sec_staticdep = 0x4a009584, + .cm_l4sec_dynamicdep = 0x4a009588, + .cm_l4sec_aes1_clkctrl = 0x4a0095a0, + .cm_l4sec_aes2_clkctrl = 0x4a0095a8, + .cm_l4sec_des3des_clkctrl = 0x4a0095b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, + .cm_l4sec_rng_clkctrl = 0x4a0095c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07800, + .cm_wkup_l4wkup_clkctrl = 0x4ae07820, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, + .cm_wkup_gpio1_clkctrl = 0x4ae07838, + .cm_wkup_gptimer1_clkctrl = 0x4ae07840, + .cm_wkup_gptimer12_clkctrl = 0x4ae07848, + .cm_wkup_synctimer_clkctrl = 0x4ae07850, + .cm_wkup_usim_clkctrl = 0x4ae07858, + .cm_wkup_sarram_clkctrl = 0x4ae07860, + .cm_wkup_keyboard_clkctrl = 0x4ae07878, + .cm_wkup_rtc_clkctrl = 0x4ae07880, + .cm_wkup_bandgap_clkctrl = 0x4ae07888, + .cm_wkupaon_scrm_clkctrl = 0x4ae07890, + .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898, + .prm_rstctrl = 0x4ae07b00, + .prm_rstst = 0x4ae07b04, + .prm_vc_val_bypass = 0x4ae07ba0, + .prm_vc_cfg_i2c_mode = 0x4ae07bb4, + .prm_vc_cfg_i2c_clk = 0x4ae07bb8, + .prm_sldo_core_setup = 0x4ae07bc4, + .prm_sldo_core_ctrl = 0x4ae07bc8, + .prm_sldo_mpu_setup = 0x4ae07bcc, + .prm_sldo_mpu_ctrl = 0x4ae07bd0, + .prm_sldo_mm_setup = 0x4ae07bd4, + .prm_sldo_mm_ctrl = 0x4ae07bd8, +}; + +struct omap_sys_ctrl_regs const omap5_ctrl = { + .control_status = 0x4A002134, + .control_paconf_global = 0x4A002DA0, + .control_paconf_mode = 0x4A002DA4, + .control_smart1io_padconf_0 = 0x4A002DA8, + .control_smart1io_padconf_1 = 0x4A002DAC, + .control_smart1io_padconf_2 = 0x4A002DB0, + .control_smart2io_padconf_0 = 0x4A002DB4, + .control_smart2io_padconf_1 = 0x4A002DB8, + .control_smart2io_padconf_2 = 0x4A002DBC, + .control_smart3io_padconf_0 = 0x4A002DC0, + .control_smart3io_padconf_1 = 0x4A002DC4, + .control_pbias = 0x4A002E00, + .control_i2c_0 = 0x4A002E04, + .control_camera_rx = 0x4A002E08, + .control_hdmi_tx_phy = 0x4A002E0C, + .control_uniportm = 0x4A002E10, + .control_dsiphy = 0x4A002E14, + .control_mcbsplp = 0x4A002E18, + .control_usb2phycore = 0x4A002E1C, + .control_hdmi_1 = 0x4A002E20, + .control_hsi = 0x4A002E24, + .control_ddr3ch1_0 = 0x4A002E30, + .control_ddr3ch2_0 = 0x4A002E34, + .control_ddrch1_0 = 0x4A002E38, + .control_ddrch1_1 = 0x4A002E3C, + .control_ddrch2_0 = 0x4A002E40, + .control_ddrch2_1 = 0x4A002E44, + .control_lpddr2ch1_0 = 0x4A002E48, + .control_lpddr2ch1_1 = 0x4A002E4C, + .control_ddrio_0 = 0x4A002E50, + .control_ddrio_1 = 0x4A002E54, + .control_ddrio_2 = 0x4A002E58, + .control_hyst_1 = 0x4A002E5C, + .control_usbb_hsic_control = 0x4A002E60, + .control_c2c = 0x4A002E64, + .control_core_control_spare_rw = 0x4A002E68, + .control_core_control_spare_r = 0x4A002E6C, + .control_core_control_spare_r_c0 = 0x4A002E70, + .control_srcomp_north_side = 0x4A002E74, + .control_srcomp_south_side = 0x4A002E78, + .control_srcomp_east_side = 0x4A002E7C, + .control_srcomp_west_side = 0x4A002E80, + .control_srcomp_code_latch = 0x4A002E84, + .control_port_emif1_sdram_config = 0x4AE0C110, + .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, + .control_port_emif2_sdram_config = 0x4AE0C118, + .control_emif1_sdram_config_ext = 0x4AE0C144, + .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_smart1nopmio_padconf_0 = 0x4AE0CDA0, + .control_smart1nopmio_padconf_1 = 0x4AE0CDA4, + .control_padconf_mode = 0x4AE0CDA8, + .control_xtal_oscillator = 0x4AE0CDAC, + .control_i2c_2 = 0x4AE0CDB0, + .control_ckobuffer = 0x4AE0CDB4, + .control_wkup_control_spare_rw = 0x4AE0CDB8, + .control_wkup_control_spare_r = 0x4AE0CDBC, + .control_wkup_control_spare_r_c0 = 0x4AE0CDC0, + .control_srcomp_east_side_wkup = 0x4AE0CDC4, + .control_efuse_1 = 0x4AE0CDC8, + .control_efuse_2 = 0x4AE0CDCC, + .control_efuse_3 = 0x4AE0CDD0, + .control_efuse_4 = 0x4AE0CDD4, + .control_efuse_5 = 0x4AE0CDD8, + .control_efuse_6 = 0x4AE0CDDC, + .control_efuse_7 = 0x4AE0CDE0, + .control_efuse_8 = 0x4AE0CDE4, + .control_efuse_9 = 0x4AE0CDE8, + .control_efuse_10 = 0x4AE0CDEC, + .control_efuse_11 = 0x4AE0CDF0, + .control_efuse_12 = 0x4AE0CDF4, + .control_efuse_13 = 0x4AE0CDF8, +}; + +struct omap_sys_ctrl_regs const dra7xx_ctrl = { + .control_status = 0x4A002134, + .control_core_mmr_lock1 = 0x4A002540, + .control_core_mmr_lock2 = 0x4A002544, + .control_core_mmr_lock3 = 0x4A002548, + .control_core_mmr_lock4 = 0x4A00254C, + .control_core_mmr_lock5 = 0x4A002550, + .control_core_control_io1 = 0x4A002554, + .control_core_control_io2 = 0x4A002558, + .control_paconf_global = 0x4A002DA0, + .control_paconf_mode = 0x4A002DA4, + .control_smart1io_padconf_0 = 0x4A002DA8, + .control_smart1io_padconf_1 = 0x4A002DAC, + .control_smart1io_padconf_2 = 0x4A002DB0, + .control_smart2io_padconf_0 = 0x4A002DB4, + .control_smart2io_padconf_1 = 0x4A002DB8, + .control_smart2io_padconf_2 = 0x4A002DBC, + .control_smart3io_padconf_0 = 0x4A002DC0, + .control_smart3io_padconf_1 = 0x4A002DC4, + .control_pbias = 0x4A002E00, + .control_i2c_0 = 0x4A002E04, + .control_camera_rx = 0x4A002E08, + .control_hdmi_tx_phy = 0x4A002E0C, + .control_uniportm = 0x4A002E10, + .control_dsiphy = 0x4A002E14, + .control_mcbsplp = 0x4A002E18, + .control_usb2phycore = 0x4A002E1C, + .control_hdmi_1 = 0x4A002E20, + .control_hsi = 0x4A002E24, + .control_ddr3ch1_0 = 0x4A002E30, + .control_ddr3ch2_0 = 0x4A002E34, + .control_ddrch1_0 = 0x4A002E38, + .control_ddrch1_1 = 0x4A002E3C, + .control_ddrch2_0 = 0x4A002E40, + .control_ddrch2_1 = 0x4A002E44, + .control_lpddr2ch1_0 = 0x4A002E48, + .control_lpddr2ch1_1 = 0x4A002E4C, + .control_ddrio_0 = 0x4A002E50, + .control_ddrio_1 = 0x4A002E54, + .control_ddrio_2 = 0x4A002E58, + .control_hyst_1 = 0x4A002E5C, + .control_usbb_hsic_control = 0x4A002E60, + .control_c2c = 0x4A002E64, + .control_core_control_spare_rw = 0x4A002E68, + .control_core_control_spare_r = 0x4A002E6C, + .control_core_control_spare_r_c0 = 0x4A002E70, + .control_srcomp_north_side = 0x4A002E74, + .control_srcomp_south_side = 0x4A002E78, + .control_srcomp_east_side = 0x4A002E7C, + .control_srcomp_west_side = 0x4A002E80, + .control_srcomp_code_latch = 0x4A002E84, + .control_padconf_core_base = 0x4A003400, + .control_port_emif1_sdram_config = 0x4AE0C110, + .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, + .control_port_emif2_sdram_config = 0x4AE0C118, + .control_emif1_sdram_config_ext = 0x4AE0C144, + .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_padconf_mode = 0x4AE0C5A0, + .control_xtal_oscillator = 0x4AE0C5A4, + .control_i2c_2 = 0x4AE0C5A8, + .control_ckobuffer = 0x4AE0C5AC, + .control_wkup_control_spare_rw = 0x4AE0C5B0, + .control_wkup_control_spare_r = 0x4AE0C5B4, + .control_wkup_control_spare_r_c0 = 0x4AE0C5B8, + .control_srcomp_east_side_wkup = 0x4AE0C5BC, + .control_efuse_1 = 0x4AE0C5C0, + .control_efuse_2 = 0x4AE0C5C4, + .control_efuse_3 = 0x4AE0C5C8, + .control_efuse_4 = 0x4AE0C5CC, + .control_efuse_13 = 0x4AE0C5F0, +}; + +struct prcm_regs const omap5_es2_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_h11_dpll_core = 0x4a004138, + .cm_div_h12_dpll_core = 0x4a00413c, + .cm_div_h13_dpll_core = 0x4a004140, + .cm_div_h14_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_div_h21_dpll_core = 0x4a004150, + .cm_div_h22_dpllcore = 0x4a004154, + .cm_div_h23_dpll_core = 0x4a004158, + .cm_div_h24_dpll_core = 0x4a00415c, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_h11_dpll_iva = 0x4a0041b8, + .cm_div_h12_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_h11_dpll_ddrphy = 0x4a004238, + .cm_div_h12_dpll_ddrphy = 0x4a00423c, + .cm_div_h13_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h13_dpll_per = 0x4a008160, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + .cm_coreaon_bandgap_clkctrl = 0x4a008648, + .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + .cm_l4per_clkstctrl = 0x4a009000, + .cm_l4per_dynamicdep = 0x4a009008, + .cm_l4per_adc_clkctrl = 0x4a009020, + .cm_l4per_gptimer10_clkctrl = 0x4a009028, + .cm_l4per_gptimer11_clkctrl = 0x4a009030, + .cm_l4per_gptimer2_clkctrl = 0x4a009038, + .cm_l4per_gptimer3_clkctrl = 0x4a009040, + .cm_l4per_gptimer4_clkctrl = 0x4a009048, + .cm_l4per_gptimer9_clkctrl = 0x4a009050, + .cm_l4per_elm_clkctrl = 0x4a009058, + .cm_l4per_gpio2_clkctrl = 0x4a009060, + .cm_l4per_gpio3_clkctrl = 0x4a009068, + .cm_l4per_gpio4_clkctrl = 0x4a009070, + .cm_l4per_gpio5_clkctrl = 0x4a009078, + .cm_l4per_gpio6_clkctrl = 0x4a009080, + .cm_l4per_hdq1w_clkctrl = 0x4a009088, + .cm_l4per_hecc1_clkctrl = 0x4a009090, + .cm_l4per_hecc2_clkctrl = 0x4a009098, + .cm_l4per_i2c1_clkctrl = 0x4a0090a0, + .cm_l4per_i2c2_clkctrl = 0x4a0090a8, + .cm_l4per_i2c3_clkctrl = 0x4a0090b0, + .cm_l4per_i2c4_clkctrl = 0x4a0090b8, + .cm_l4per_l4per_clkctrl = 0x4a0090c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0090d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0090d8, + .cm_l4per_mgate_clkctrl = 0x4a0090e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0090f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0090f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009100, + .cm_l4per_mcspi4_clkctrl = 0x4a009108, + .cm_l4per_gpio7_clkctrl = 0x4a009110, + .cm_l4per_gpio8_clkctrl = 0x4a009118, + .cm_l4per_mmcsd3_clkctrl = 0x4a009120, + .cm_l4per_mmcsd4_clkctrl = 0x4a009128, + .cm_l4per_msprohg_clkctrl = 0x4a009130, + .cm_l4per_slimbus2_clkctrl = 0x4a009138, + .cm_l4per_uart1_clkctrl = 0x4a009140, + .cm_l4per_uart2_clkctrl = 0x4a009148, + .cm_l4per_uart3_clkctrl = 0x4a009150, + .cm_l4per_uart4_clkctrl = 0x4a009158, + .cm_l4per_mmcsd5_clkctrl = 0x4a009160, + .cm_l4per_i2c5_clkctrl = 0x4a009168, + .cm_l4per_uart5_clkctrl = 0x4a009170, + .cm_l4per_uart6_clkctrl = 0x4a009178, + .cm_l4sec_clkstctrl = 0x4a009180, + .cm_l4sec_staticdep = 0x4a009184, + .cm_l4sec_dynamicdep = 0x4a009188, + .cm_l4sec_aes1_clkctrl = 0x4a0091a0, + .cm_l4sec_aes2_clkctrl = 0x4a0091a8, + .cm_l4sec_des3des_clkctrl = 0x4a0091b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0091b8, + .cm_l4sec_rng_clkctrl = 0x4a0091c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0091c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0091d8, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a009200, + .cm_ivahd_ivahd_clkctrl = 0x4a009220, + .cm_ivahd_sl2_clkctrl = 0x4a009228, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009300, + .cm_cam_iss_clkctrl = 0x4a009320, + .cm_cam_fdif_clkctrl = 0x4a009328, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009400, + .cm_dss_dss_clkctrl = 0x4a009420, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009500, + .cm_sgx_sgx_clkctrl = 0x4a009520, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009600, + + /* cm2.l3init */ + .cm_l3init_hsmmc1_clkctrl = 0x4a009628, + .cm_l3init_hsmmc2_clkctrl = 0x4a009630, + .cm_l3init_hsi_clkctrl = 0x4a009638, + .cm_l3init_hsusbhost_clkctrl = 0x4a009658, + .cm_l3init_hsusbotg_clkctrl = 0x4a009660, + .cm_l3init_hsusbtll_clkctrl = 0x4a009668, + .cm_l3init_p1500_clkctrl = 0x4a009678, + .cm_l3init_fsusb_clkctrl = 0x4a0096d0, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07900, + .cm_wkup_l4wkup_clkctrl = 0x4ae07920, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07928, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07930, + .cm_wkup_gpio1_clkctrl = 0x4ae07938, + .cm_wkup_gptimer1_clkctrl = 0x4ae07940, + .cm_wkup_gptimer12_clkctrl = 0x4ae07948, + .cm_wkup_synctimer_clkctrl = 0x4ae07950, + .cm_wkup_usim_clkctrl = 0x4ae07958, + .cm_wkup_sarram_clkctrl = 0x4ae07960, + .cm_wkup_keyboard_clkctrl = 0x4ae07978, + .cm_wkup_rtc_clkctrl = 0x4ae07980, + .cm_wkup_bandgap_clkctrl = 0x4ae07988, + .cm_wkupaon_scrm_clkctrl = 0x4ae07990, + .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998, + .prm_rstctrl = 0x4ae07c00, + .prm_rstst = 0x4ae07c04, + .prm_vc_val_bypass = 0x4ae07ca0, + .prm_vc_cfg_i2c_mode = 0x4ae07cb4, + .prm_vc_cfg_i2c_clk = 0x4ae07cb8, + + .prm_sldo_core_setup = 0x4ae07cc4, + .prm_sldo_core_ctrl = 0x4ae07cc8, + .prm_sldo_mpu_setup = 0x4ae07ccc, + .prm_sldo_mpu_ctrl = 0x4ae07cd0, + .prm_sldo_mm_setup = 0x4ae07cd4, + .prm_sldo_mm_ctrl = 0x4ae07cd8, +}; + +struct prcm_regs const dra7xx_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a005100, + .cm_clksel_abe = 0x4a005108, + .cm_dll_ctrl = 0x4a005110, + .cm_clkmode_dpll_core = 0x4a005120, + .cm_idlest_dpll_core = 0x4a005124, + .cm_autoidle_dpll_core = 0x4a005128, + .cm_clksel_dpll_core = 0x4a00512c, + .cm_div_m2_dpll_core = 0x4a005130, + .cm_div_m3_dpll_core = 0x4a005134, + .cm_div_h11_dpll_core = 0x4a005138, + .cm_div_h12_dpll_core = 0x4a00513c, + .cm_div_h13_dpll_core = 0x4a005140, + .cm_div_h14_dpll_core = 0x4a005144, + .cm_ssc_deltamstep_dpll_core = 0x4a005148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00514c, + .cm_div_h21_dpll_core = 0x4a005150, + .cm_div_h22_dpllcore = 0x4a005154, + .cm_div_h23_dpll_core = 0x4a005158, + .cm_div_h24_dpll_core = 0x4a00515c, + .cm_clkmode_dpll_mpu = 0x4a005160, + .cm_idlest_dpll_mpu = 0x4a005164, + .cm_autoidle_dpll_mpu = 0x4a005168, + .cm_clksel_dpll_mpu = 0x4a00516c, + .cm_div_m2_dpll_mpu = 0x4a005170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a005188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00518c, + .cm_bypclk_dpll_mpu = 0x4a00519c, + .cm_clkmode_dpll_iva = 0x4a0051a0, + .cm_idlest_dpll_iva = 0x4a0051a4, + .cm_autoidle_dpll_iva = 0x4a0051a8, + .cm_clksel_dpll_iva = 0x4a0051ac, + .cm_ssc_deltamstep_dpll_iva = 0x4a0051c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0051cc, + .cm_bypclk_dpll_iva = 0x4a0051dc, + .cm_clkmode_dpll_abe = 0x4a0051e0, + .cm_idlest_dpll_abe = 0x4a0051e4, + .cm_autoidle_dpll_abe = 0x4a0051e8, + .cm_clksel_dpll_abe = 0x4a0051ec, + .cm_div_m2_dpll_abe = 0x4a0051f0, + .cm_div_m3_dpll_abe = 0x4a0051f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a005208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00520c, + .cm_clkmode_dpll_ddrphy = 0x4a005210, + .cm_idlest_dpll_ddrphy = 0x4a005214, + .cm_autoidle_dpll_ddrphy = 0x4a005218, + .cm_clksel_dpll_ddrphy = 0x4a00521c, + .cm_div_m2_dpll_ddrphy = 0x4a005220, + .cm_div_h11_dpll_ddrphy = 0x4a005228, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a00522c, + .cm_clkmode_dpll_dsp = 0x4a005234, + .cm_shadow_freq_config1 = 0x4a005260, + + /* cm1.mpu */ + .cm_mpu_mpu_clkctrl = 0x4a005320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a005400, + .cm_dsp_dsp_clkctrl = 0x4a005420, + + /* cm2.ckgen */ + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h13_dpll_per = 0x4a008160, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_pcie_ref = 0x4a008200, + .cm_clkmode_apll_pcie = 0x4a00821c, + .cm_idlest_apll_pcie = 0x4a008220, + .cm_div_m2_apll_pcie = 0x4a008224, + .cm_clkvcoldo_apll_pcie = 0x4a008228, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_gpmc_clkctrl = 0x4a008728, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a008f00, + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_vip1_clkctrl = 0x4a009020, + .cm_cam_vip2_clkctrl = 0x4a009028, + .cm_cam_vip3_clkctrl = 0x4a009030, + .cm_cam_lvdsrx_clkctrl = 0x4a009038, + .cm_cam_csi1_clkctrl = 0x4a009040, + .cm_cam_csi2_clkctrl = 0x4a009048, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + + /* cm2.l3init */ + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsusbhost_clkctrl = 0x4a009340, + .cm_l3init_hsusbotg_clkctrl = 0x4a009348, + .cm_l3init_hsusbtll_clkctrl = 0x4a009350, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009700, + .cm_l4per_dynamicdep = 0x4a009708, + .cm_l4per_gptimer10_clkctrl = 0x4a009728, + .cm_l4per_gptimer11_clkctrl = 0x4a009730, + .cm_l4per_gptimer2_clkctrl = 0x4a009738, + .cm_l4per_gptimer3_clkctrl = 0x4a009740, + .cm_l4per_gptimer4_clkctrl = 0x4a009748, + .cm_l4per_gptimer9_clkctrl = 0x4a009750, + .cm_l4per_elm_clkctrl = 0x4a009758, + .cm_l4per_gpio2_clkctrl = 0x4a009760, + .cm_l4per_gpio3_clkctrl = 0x4a009768, + .cm_l4per_gpio4_clkctrl = 0x4a009770, + .cm_l4per_gpio5_clkctrl = 0x4a009778, + .cm_l4per_gpio6_clkctrl = 0x4a009780, + .cm_l4per_hdq1w_clkctrl = 0x4a009788, + .cm_l4per_i2c1_clkctrl = 0x4a0097a0, + .cm_l4per_i2c2_clkctrl = 0x4a0097a8, + .cm_l4per_i2c3_clkctrl = 0x4a0097b0, + .cm_l4per_i2c4_clkctrl = 0x4a0097b8, + .cm_l4per_l4per_clkctrl = 0x4a0097c0, + .cm_l4per_mcspi1_clkctrl = 0x4a0097f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0097f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009800, + .cm_l4per_mcspi4_clkctrl = 0x4a009808, + .cm_l4per_gpio7_clkctrl = 0x4a009810, + .cm_l4per_gpio8_clkctrl = 0x4a009818, + .cm_l4per_mmcsd3_clkctrl = 0x4a009820, + .cm_l4per_mmcsd4_clkctrl = 0x4a009828, + .cm_l4per_uart1_clkctrl = 0x4a009840, + .cm_l4per_uart2_clkctrl = 0x4a009848, + .cm_l4per_uart3_clkctrl = 0x4a009850, + .cm_l4per_uart4_clkctrl = 0x4a009858, + .cm_l4per_uart5_clkctrl = 0x4a009870, + .cm_l4sec_clkstctrl = 0x4a009880, + .cm_l4sec_staticdep = 0x4a009884, + .cm_l4sec_dynamicdep = 0x4a009888, + .cm_l4sec_aes1_clkctrl = 0x4a0098a0, + .cm_l4sec_aes2_clkctrl = 0x4a0098a8, + .cm_l4sec_des3des_clkctrl = 0x4a0098b0, + .cm_l4sec_rng_clkctrl = 0x4a0098c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0098c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0098d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07800, + .cm_wkup_l4wkup_clkctrl = 0x4ae07820, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, + .cm_wkup_gpio1_clkctrl = 0x4ae07838, + .cm_wkup_gptimer1_clkctrl = 0x4ae07840, + .cm_wkup_gptimer12_clkctrl = 0x4ae07848, + .cm_wkup_sarram_clkctrl = 0x4ae07860, + .cm_wkup_keyboard_clkctrl = 0x4ae07878, + .cm_wkupaon_scrm_clkctrl = 0x4ae07890, + .prm_rstctrl = 0x4ae07d00, + .prm_rstst = 0x4ae07d04, + .prm_vc_val_bypass = 0x4ae07da0, + .prm_vc_cfg_i2c_mode = 0x4ae07db4, + .prm_vc_cfg_i2c_clk = 0x4ae07db8, +}; diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 6ebdf5fbfd..6b461e4846 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -67,6 +67,25 @@ const struct emif_regs emif_regs_532_mhz_2cs = { .emif_ddr_ext_phy_ctrl_5 = 0x04010040 }; +const struct emif_regs emif_regs_532_mhz_2cs_es2 = { + .sdram_config_init = 0x80800EBA, + .sdram_config = 0x808022BA, + .ref_ctrl = 0x0000081A, + .sdram_tim1 = 0x772F6873, + .sdram_tim2 = 0x304a129a, + .sdram_tim3 = 0x02f7e45f, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x100b3215, + .temp_alert_config = 0x08000a05, + .emif_ddr_phy_ctlr_1_init = 0x0E30400d, + .emif_ddr_phy_ctlr_1 = 0x0E30400d, + .emif_ddr_ext_phy_ctrl_1 = 0x04020080, + .emif_ddr_ext_phy_ctrl_2 = 0x28C518A3, + .emif_ddr_ext_phy_ctrl_3 = 0x518A3146, + .emif_ddr_ext_phy_ctrl_4 = 0x0014628C, + .emif_ddr_ext_phy_ctrl_5 = 0xC330CC33, +}; + const struct emif_regs emif_regs_266_mhz_2cs = { .sdram_config_init = 0x80800EBA, .sdram_config = 0x808022BA, @@ -109,13 +128,111 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs = { .emif_rd_wr_exec_thresh = 0x00000305 }; +const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = { + .sdram_config_init = 0x61851B32, + .sdram_config = 0x61851B32, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x1007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0030400A, + .emif_ddr_phy_ctlr_1 = 0x0034400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00000000, + .emif_ddr_ext_phy_ctrl_3 = 0x00000000, + .emif_ddr_ext_phy_ctrl_4 = 0x00000000, + .emif_ddr_ext_phy_ctrl_5 = 0x4350D435, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x40000305 +}; + const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { .dmm_lisa_map_0 = 0x0, .dmm_lisa_map_1 = 0x0, .dmm_lisa_map_2 = 0x80740300, - .dmm_lisa_map_3 = 0xFF020100 + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +const struct dmm_lisa_map_regs lisa_map_512M_x_1 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x0, + .dmm_lisa_map_2 = 0x0, + .dmm_lisa_map_3 = 0x80500100, + .is_ma_present = 0x1 +}; + +static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) +{ + switch (omap_revision()) { + case OMAP5430_ES1_0: + *regs = &emif_regs_532_mhz_2cs; + break; + case OMAP5432_ES1_0: + *regs = &emif_regs_ddr3_532_mhz_1cs; + break; + case OMAP5430_ES2_0: + *regs = &emif_regs_532_mhz_2cs_es2; + break; + case OMAP5432_ES2_0: + case DRA752_ES1_0: + default: + *regs = &emif_regs_ddr3_532_mhz_1cs_es2; + } +} + +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) + __attribute__((weak, alias("emif_get_reg_dump_sdp"))); + +static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs + **dmm_lisa_regs) +{ + switch (omap_revision()) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + case OMAP5432_ES1_0: + case OMAP5432_ES2_0: + *dmm_lisa_regs = &lisa_map_4G_x_2_x_2; + break; + case DRA752_ES1_0: + default: + *dmm_lisa_regs = &lisa_map_512M_x_1; + } + +} + +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) + __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); +#else + +static const struct lpddr2_device_details dev_4G_S4_details = { + .type = LPDDR2_TYPE_S4, + .density = LPDDR2_DENSITY_4Gb, + .io_width = LPDDR2_IO_WIDTH_32, + .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG }; +static void emif_get_device_details_sdp(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) +{ + /* EMIF1 & EMIF2 have identical configuration */ + *cs0_device_details = dev_4G_S4_details; + *cs1_device_details = dev_4G_S4_details; +} + +void emif_get_device_details(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) + __attribute__((weak, alias("emif_get_device_details_sdp"))); + +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x01004010, 0x00001004, @@ -138,7 +255,7 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000077 }; -const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { +const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x01004010, 0x00001004, 0x04010040, @@ -160,54 +277,64 @@ const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000057 }; -static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) -{ - if (omap_revision() == OMAP5432_ES1_0) - *regs = &emif_regs_ddr3_532_mhz_1cs; - else - *regs = &emif_regs_532_mhz_2cs; -} -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) - __attribute__((weak, alias("emif_get_reg_dump_sdp"))); - -static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs - **dmm_lisa_regs) -{ - *dmm_lisa_regs = &lisa_map_4G_x_2_x_2; -} - -void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) - __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); - -#else +const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x50D4350D, + 0x00000D43, + 0x04010040, + 0x01004010, + 0x00001004, + 0x00000000, + 0x00000000, + 0x00000000, + 0x80080080, + 0x00800800, + 0x08102040, + 0x00000002, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000057 +}; -static const struct lpddr2_device_details dev_4G_S4_details = { - .type = LPDDR2_TYPE_S4, - .density = LPDDR2_DENSITY_4Gb, - .io_width = LPDDR2_IO_WIDTH_32, - .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG +const struct lpddr2_mr_regs mr_regs = { + .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8, + .mr2 = 0x6, + .mr3 = 0x1, + .mr10 = MR10_ZQ_ZQINIT, + .mr16 = MR16_REF_FULL_ARRAY }; -static void emif_get_device_details_sdp(u32 emif_nr, - struct lpddr2_device_details *cs0_device_details, - struct lpddr2_device_details *cs1_device_details) +static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs) { - /* EMIF1 & EMIF2 have identical configuration */ - *cs0_device_details = dev_4G_S4_details; - *cs1_device_details = dev_4G_S4_details; -} + switch (omap_revision()) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + *regs = ext_phy_ctrl_const_base; + break; + case OMAP5432_ES1_0: + *regs = ddr3_ext_phy_ctrl_const_base_es1; + break; + case OMAP5432_ES2_0: + case DRA752_ES1_0: + default: + *regs = ddr3_ext_phy_ctrl_const_base_es2; -void emif_get_device_details(u32 emif_nr, - struct lpddr2_device_details *cs0_device_details, - struct lpddr2_device_details *cs1_device_details) - __attribute__((weak, alias("emif_get_device_details_sdp"))); + } +} -#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) +{ + *regs = &mr_regs; +} void do_ext_phy_settings(u32 base, const struct emif_regs *regs) { u32 *ext_phy_ctrl_base = 0; u32 *emif_ext_phy_ctrl_base = 0; + const u32 *ext_phy_ctrl_const_regs; u32 i = 0; struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -226,12 +353,13 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs) * external phy 6-24 registers do not change with * ddr frequency */ + emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs); for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) { - writel(ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); + writel(ext_phy_ctrl_const_regs[i], + emif_ext_phy_ctrl_base++); /* Update shadow registers */ - writel(ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); + writel(ext_phy_ctrl_const_regs[i], + emif_ext_phy_ctrl_base++); } } diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 141206e739..fa5fad1b0c 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -309,6 +309,25 @@ ENTRY(cpu_init_cp15) orr r0, r0, #0x00001000 @ set bit 12 (I) I-cache #endif mcr p15, 0, r0, c1, c0, 0 + +#ifdef CONFIG_ARM_ERRATA_742230 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 4 @ set bit #4 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + +#ifdef CONFIG_ARM_ERRATA_743622 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 6 @ set bit #6 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + +#ifdef CONFIG_ARM_ERRATA_751472 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 11 @ set bit #11 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + mov pc, lr @ back to my caller ENDPROC(cpu_init_cp15) diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile index 54ed8c48b4..c8a8504e16 100644 --- a/arch/arm/cpu/armv7/tegra20/Makefile +++ b/arch/arm/cpu/armv7/tegra20/Makefile @@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o COBJS-$(CONFIG_PWM_TEGRA) += pwm.o COBJS-$(CONFIG_VIDEO_TEGRA) += display.o diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c deleted file mode 100644 index 1bccf2b0b2..0000000000 --- a/arch/arm/cpu/armv7/tegra20/usb.c +++ /dev/null @@ -1,567 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm-generic/gpio.h> -#include <asm/arch/clock.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pinmux.h> -#include <asm/arch/tegra.h> -#include <asm/arch/usb.h> -#include <usb/ulpi.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/sys_proto.h> -#include <asm/arch-tegra/uart.h> -#include <libfdt.h> -#include <fdtdec.h> - -#ifdef CONFIG_USB_ULPI - #ifndef CONFIG_USB_ULPI_VIEWPORT - #error "To use CONFIG_USB_ULPI on Tegra Boards you have to also \ - define CONFIG_USB_ULPI_VIEWPORT" - #endif -#endif - -enum { - USB_PORTS_MAX = 4, /* Maximum ports we allow */ -}; - -/* Parameters we need for USB */ -enum { - PARAM_DIVN, /* PLL FEEDBACK DIVIDer */ - PARAM_DIVM, /* PLL INPUT DIVIDER */ - PARAM_DIVP, /* POST DIVIDER (2^N) */ - PARAM_CPCON, /* BASE PLLC CHARGE Pump setup ctrl */ - PARAM_LFCON, /* BASE PLLC LOOP FILter setup ctrl */ - PARAM_ENABLE_DELAY_COUNT, /* PLL-U Enable Delay Count */ - PARAM_STABLE_COUNT, /* PLL-U STABLE count */ - PARAM_ACTIVE_DELAY_COUNT, /* PLL-U Active delay count */ - PARAM_XTAL_FREQ_COUNT, /* PLL-U XTAL frequency count */ - PARAM_DEBOUNCE_A_TIME, /* 10MS DELAY for BIAS_DEBOUNCE_A */ - PARAM_BIAS_TIME, /* 20US DELAY AFter bias cell op */ - - PARAM_COUNT -}; - -/* Possible port types (dual role mode) */ -enum dr_mode { - DR_MODE_NONE = 0, - DR_MODE_HOST, /* supports host operation */ - DR_MODE_DEVICE, /* supports device operation */ - DR_MODE_OTG, /* supports both */ -}; - -/* Information about a USB port */ -struct fdt_usb { - struct usb_ctlr *reg; /* address of registers in physical memory */ - unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */ - unsigned ulpi:1; /* 1 if port has external ULPI transceiver */ - unsigned enabled:1; /* 1 to enable, 0 to disable */ - unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */ - enum dr_mode dr_mode; /* dual role mode */ - enum periph_id periph_id;/* peripheral id */ - struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */ - struct fdt_gpio_state phy_reset_gpio; /* GPIO to reset ULPI phy */ -}; - -static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ -static unsigned port_count; /* Number of available ports */ - -/* - * This table has USB timing parameters for each Oscillator frequency we - * support. There are four sets of values: - * - * 1. PLLU configuration information (reference clock is osc/clk_m and - * PLLU-FOs are fixed at 12MHz/60MHz/480MHz). - * - * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz - * ---------------------------------------------------------------------- - * DIVN 960 (0x3c0) 200 (0c8) 960 (3c0h) 960 (3c0) - * DIVM 13 (0d) 4 (04) 12 (0c) 26 (1a) - * Filter frequency (MHz) 1 4.8 6 2 - * CPCON 1100b 0011b 1100b 1100b - * LFCON0 0 0 0 0 - * - * 2. PLL CONFIGURATION & PARAMETERS for different clock generators: - * - * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz - * --------------------------------------------------------------------------- - * PLLU_ENABLE_DLY_COUNT 02 (0x02) 03 (03) 02 (02) 04 (04) - * PLLU_STABLE_COUNT 51 (33) 75 (4B) 47 (2F) 102 (66) - * PLL_ACTIVE_DLY_COUNT 05 (05) 06 (06) 04 (04) 09 (09) - * XTAL_FREQ_COUNT 127 (7F) 187 (BB) 118 (76) 254 (FE) - * - * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and - * SessEnd. Each of these signals have their own debouncer and for each of - * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or - * BIAS_DEBOUNCE_B). - * - * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows: - * 0xffff -> No debouncing at all - * <n> ms = <n> *1000 / (1/19.2MHz) / 4 - * - * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have: - * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4 = 4800 = 0x12c0 - * - * We need to use only DebounceA for BOOTROM. We don't need the DebounceB - * values, so we can keep those to default. - * - * 4. The 20 microsecond delay after bias cell operation. - */ -static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { - /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */ - { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 }, - { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 }, - { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 }, - { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 } -}; - -/* UTMIP Idle Wait Delay */ -static const u8 utmip_idle_wait_delay = 17; - -/* UTMIP Elastic limit */ -static const u8 utmip_elastic_limit = 16; - -/* UTMIP High Speed Sync Start Delay */ -static const u8 utmip_hs_sync_start_delay = 9; - -/* Put the port into host mode */ -static void set_host_mode(struct fdt_usb *config) -{ - /* - * If we are an OTG port, check if remote host is driving VBus and - * bail out in this case. - */ - if (config->dr_mode == DR_MODE_OTG && - (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS)) - return; - - /* - * If not driving, we set the GPIO to enable VBUS. We assume - * that the pinmux is set up correctly for this. - */ - if (fdt_gpio_isvalid(&config->vbus_gpio)) { - fdtdec_setup_gpio(&config->vbus_gpio); - gpio_direction_output(config->vbus_gpio.gpio, - (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ? - 0 : 1); - debug("set_host_mode: GPIO %d %s\n", config->vbus_gpio.gpio, - (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ? - "low" : "high"); - } -} - -void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr) -{ - /* Reset the USB controller with 2us delay */ - reset_periph(config->periph_id, 2); - - /* - * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under - * base address - */ - if (config->has_legacy_mode) - setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE); - - /* Put UTMIP1/3 in reset */ - setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET); - - /* Enable the UTMIP PHY */ - if (config->utmi) - setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB); - - /* - * TODO: where do we take the USB1 out of reset? The old code would - * take USB3 out of reset, but not USB1. This code doesn't do either. - */ -} - -/* set up the UTMI USB controller with the parameters provided */ -static int init_utmi_usb_controller(struct fdt_usb *config, - struct usb_ctlr *usbctlr, const u32 timing[]) -{ - u32 val; - int loop_count; - - clock_enable(config->periph_id); - - /* Reset the usb controller */ - usbf_reset_controller(config, usbctlr); - - /* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */ - clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN); - - /* Follow the crystal clock disable by >100ns delay */ - udelay(1); - - /* - * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP - * mux must be switched to actually use a_sess_vld threshold. - */ - if (fdt_gpio_isvalid(&config->vbus_gpio)) { - clrsetbits_le32(&usbctlr->usb1_legacy_ctrl, - VBUS_SENSE_CTL_MASK, - VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT); - } - - /* - * PLL Delay CONFIGURATION settings. The following parameters control - * the bring up of the plls. - */ - val = readl(&usbctlr->utmip_misc_cfg1); - clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK, - timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT); - clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK, - timing[PARAM_ACTIVE_DELAY_COUNT] << - UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT); - writel(val, &usbctlr->utmip_misc_cfg1); - - /* Set PLL enable delay count and crystal frequency count */ - val = readl(&usbctlr->utmip_pll_cfg1); - clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK, - timing[PARAM_ENABLE_DELAY_COUNT] << - UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT); - clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK, - timing[PARAM_XTAL_FREQ_COUNT] << - UTMIP_XTAL_FREQ_COUNT_SHIFT); - writel(val, &usbctlr->utmip_pll_cfg1); - - /* Setting the tracking length time */ - clrsetbits_le32(&usbctlr->utmip_bias_cfg1, - UTMIP_BIAS_PDTRK_COUNT_MASK, - timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT); - - /* Program debounce time for VBUS to become valid */ - clrsetbits_le32(&usbctlr->utmip_debounce_cfg0, - UTMIP_DEBOUNCE_CFG0_MASK, - timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT); - - setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J); - - /* Disable battery charge enabling bit */ - setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG); - - clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE); - setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL); - - /* - * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT - * Setting these fields, together with default values of the - * other fields, results in programming the registers below as - * follows: - * UTMIP_HSRX_CFG0 = 0x9168c000 - * UTMIP_HSRX_CFG1 = 0x13 - */ - - /* Set PLL enable delay count and Crystal frequency count */ - val = readl(&usbctlr->utmip_hsrx_cfg0); - clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK, - utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT); - clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK, - utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT); - writel(val, &usbctlr->utmip_hsrx_cfg0); - - /* Configure the UTMIP_HS_SYNC_START_DLY */ - clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1, - UTMIP_HS_SYNC_START_DLY_MASK, - utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT); - - /* Preceed the crystal clock disable by >100ns delay. */ - udelay(1); - - /* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */ - setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN); - - /* Finished the per-controller init. */ - - /* De-assert UTMIP_RESET to bring out of reset. */ - clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET); - - /* Wait for the phy clock to become valid in 100 ms */ - for (loop_count = 100000; loop_count != 0; loop_count--) { - if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID) - break; - udelay(1); - } - if (!loop_count) - return -1; - - /* Disable ICUSB FS/LS transceiver */ - clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1); - - /* Select UTMI parallel interface */ - clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, - PTS_UTMI << PTS_SHIFT); - clrbits_le32(&usbctlr->port_sc1, STS); - - /* Deassert power down state */ - clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN | - UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN); - clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN | - UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN); - - return 0; -} - -#ifdef CONFIG_USB_ULPI -/* if board file does not set a ULPI reference frequency we default to 24MHz */ -#ifndef CONFIG_ULPI_REF_CLK -#define CONFIG_ULPI_REF_CLK 24000000 -#endif - -/* set up the ULPI USB controller with the parameters provided */ -static int init_ulpi_usb_controller(struct fdt_usb *config, - struct usb_ctlr *usbctlr) -{ - u32 val; - int loop_count; - struct ulpi_viewport ulpi_vp; - - /* set up ULPI reference clock on pllp_out4 */ - clock_enable(PERIPH_ID_DEV2_OUT); - clock_set_pllout(CLOCK_ID_PERIPH, PLL_OUT4, CONFIG_ULPI_REF_CLK); - - /* reset ULPI phy */ - if (fdt_gpio_isvalid(&config->phy_reset_gpio)) { - fdtdec_setup_gpio(&config->phy_reset_gpio); - gpio_direction_output(config->phy_reset_gpio.gpio, 0); - mdelay(5); - gpio_set_value(config->phy_reset_gpio.gpio, 1); - } - - /* Reset the usb controller */ - clock_enable(config->periph_id); - usbf_reset_controller(config, usbctlr); - - /* enable pinmux bypass */ - setbits_le32(&usbctlr->ulpi_timing_ctrl_0, - ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP); - - /* Select ULPI parallel interface */ - clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT); - - /* enable ULPI transceiver */ - setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB); - - /* configure ULPI transceiver timings */ - val = 0; - writel(val, &usbctlr->ulpi_timing_ctrl_1); - - val |= ULPI_DATA_TRIMMER_SEL(4); - val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); - val |= ULPI_DIR_TRIMMER_SEL(4); - writel(val, &usbctlr->ulpi_timing_ctrl_1); - udelay(10); - - val |= ULPI_DATA_TRIMMER_LOAD; - val |= ULPI_STPDIRNXT_TRIMMER_LOAD; - val |= ULPI_DIR_TRIMMER_LOAD; - writel(val, &usbctlr->ulpi_timing_ctrl_1); - - /* set up phy for host operation with external vbus supply */ - ulpi_vp.port_num = 0; - ulpi_vp.viewport_addr = (u32)&usbctlr->ulpi_viewport; - - if (ulpi_init(&ulpi_vp)) { - printf("Tegra ULPI viewport init failed\n"); - return -1; - } - - ulpi_set_vbus(&ulpi_vp, 1, 1); - ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 0); - - /* enable wakeup events */ - setbits_le32(&usbctlr->port_sc1, WKCN | WKDS | WKOC); - - /* Enable and wait for the phy clock to become valid in 100 ms */ - setbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR); - for (loop_count = 100000; loop_count != 0; loop_count--) { - if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID) - break; - udelay(1); - } - if (!loop_count) - return -1; - clrbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR); - - return 0; -} -#else -static int init_ulpi_usb_controller(struct fdt_usb *config, - struct usb_ctlr *usbctlr) -{ - printf("No code to set up ULPI controller, please enable" - "CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT"); - return -1; -} -#endif - -static void config_clock(const u32 timing[]) -{ - clock_start_pll(CLOCK_ID_USB, - timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP], - timing[PARAM_CPCON], timing[PARAM_LFCON]); -} - -/** - * Add a new USB port to the list of available ports. - * - * @param config USB port configuration - * @return 0 if ok, -1 if error (too many ports) - */ -static int add_port(struct fdt_usb *config, const u32 timing[]) -{ - struct usb_ctlr *usbctlr = config->reg; - - if (port_count == USB_PORTS_MAX) { - printf("tegrausb: Cannot register more than %d ports\n", - USB_PORTS_MAX); - return -1; - } - - if (config->utmi && init_utmi_usb_controller(config, usbctlr, timing)) { - printf("tegrausb: Cannot init port\n"); - return -1; - } - - if (config->ulpi && init_ulpi_usb_controller(config, usbctlr)) { - printf("tegrausb: Cannot init port\n"); - return -1; - } - - port[port_count++] = *config; - - return 0; -} - -int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor) -{ - struct usb_ctlr *usbctlr; - - if (portnum >= port_count) - return -1; - set_host_mode(&port[portnum]); - - usbctlr = port[portnum].reg; - *hccr = (u32)&usbctlr->cap_length; - *hcor = (u32)&usbctlr->usb_cmd; - return 0; -} - -int tegrausb_stop_port(int portnum) -{ - struct usb_ctlr *usbctlr; - - usbctlr = port[portnum].reg; - - /* Stop controller */ - writel(0, &usbctlr->usb_cmd); - udelay(1000); - - /* Initiate controller reset */ - writel(2, &usbctlr->usb_cmd); - udelay(1000); - - return 0; -} - -int fdt_decode_usb(const void *blob, int node, unsigned osc_frequency_mhz, - struct fdt_usb *config) -{ - const char *phy, *mode; - - config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg"); - mode = fdt_getprop(blob, node, "dr_mode", NULL); - if (mode) { - if (0 == strcmp(mode, "host")) - config->dr_mode = DR_MODE_HOST; - else if (0 == strcmp(mode, "peripheral")) - config->dr_mode = DR_MODE_DEVICE; - else if (0 == strcmp(mode, "otg")) - config->dr_mode = DR_MODE_OTG; - else { - debug("%s: Cannot decode dr_mode '%s'\n", __func__, - mode); - return -FDT_ERR_NOTFOUND; - } - } else { - config->dr_mode = DR_MODE_HOST; - } - - phy = fdt_getprop(blob, node, "phy_type", NULL); - config->utmi = phy && 0 == strcmp("utmi", phy); - config->ulpi = phy && 0 == strcmp("ulpi", phy); - config->enabled = fdtdec_get_is_enabled(blob, node); - config->has_legacy_mode = fdtdec_get_bool(blob, node, - "nvidia,has-legacy-mode"); - config->periph_id = clock_decode_periph_id(blob, node); - if (config->periph_id == PERIPH_ID_NONE) { - debug("%s: Missing/invalid peripheral ID\n", __func__); - return -FDT_ERR_NOTFOUND; - } - fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio); - fdtdec_decode_gpio(blob, node, "nvidia,phy-reset-gpio", - &config->phy_reset_gpio); - debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, " - "vbus=%d, phy_reset=%d, dr_mode=%d\n", - config->enabled, config->has_legacy_mode, config->utmi, - config->ulpi, config->periph_id, config->vbus_gpio.gpio, - config->phy_reset_gpio.gpio, config->dr_mode); - - return 0; -} - -int board_usb_init(const void *blob) -{ - struct fdt_usb config; - unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC); - enum clock_osc_freq freq; - int node_list[USB_PORTS_MAX]; - int node, count, i; - - /* Set up the USB clocks correctly based on our oscillator frequency */ - freq = clock_get_osc_freq(); - config_clock(usb_pll[freq]); - - /* count may return <0 on error */ - count = fdtdec_find_aliases_for_id(blob, "usb", - COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX); - for (i = 0; i < count; i++) { - debug("USB %d: ", i); - node = node_list[i]; - if (!node) - continue; - if (fdt_decode_usb(blob, node, osc_freq, &config)) { - debug("Cannot decode USB node %s\n", - fdt_get_name(blob, node, NULL)); - return -1; - } - - if (add_port(&config, usb_pll[freq])) - return -1; - set_host_mode(&config); - } - - return 0; -} diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile index 499ace4a62..388085dc2a 100644 --- a/arch/arm/cpu/armv7/zynq/Makefile +++ b/arch/arm/cpu/armv7/zynq/Makefile @@ -30,6 +30,7 @@ LIB = $(obj)lib$(SOC).o COBJS-y := timer.o COBJS-y += cpu.o +COBJS-y += slcr.o COBJS := $(COBJS-y) diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c index ab615cc7d4..e8f4c19d49 100644 --- a/arch/arm/cpu/armv7/zynq/cpu.c +++ b/arch/arm/cpu/armv7/zynq/cpu.c @@ -21,11 +21,37 @@ * MA 02111-1307 USA */ #include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> -inline void lowlevel_init(void) {} +void lowlevel_init(void) +{ + zynq_slcr_unlock(); + /* remap DDR to zero, FILTERSTART */ + writel(0, &scu_base->filter_start); + + /* Device config APB, unlock the PCAP */ + writel(0x757BDF0D, &devcfg_base->unlock); + writel(0xFFFFFFFF, &devcfg_base->rom_shadow); + + /* OCM_CFG, Mask out the ROM, map ram into upper addresses */ + writel(0x1F, &slcr_base->ocm_cfg); + /* FPGA_RST_CTRL, clear resets on AXI fabric ports */ + writel(0x0, &slcr_base->fpga_rst_ctrl); + /* TZ_DDR_RAM, Set DDR trust zone non-secure */ + writel(0xFFFFFFFF, &slcr_base->trust_zone); + /* Set urgent bits with register */ + writel(0x0, &slcr_base->ddr_urgent_sel); + /* Urgent write, ports S2/S3 */ + writel(0xC, &slcr_base->ddr_urgent); + + zynq_slcr_lock(); +} void reset_cpu(ulong addr) { + zynq_slcr_cpu_reset(); while (1) ; } diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c new file mode 100644 index 0000000000..788a8fd14f --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <malloc.h> +#include <asm/arch/hardware.h> + +#define SLCR_LOCK_MAGIC 0x767B +#define SLCR_UNLOCK_MAGIC 0xDF0D + +static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */ + +void zynq_slcr_lock(void) +{ + if (!slcr_lock) + writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock); +} + +void zynq_slcr_unlock(void) +{ + if (slcr_lock) + writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock); +} + +/* Reset the entire system */ +void zynq_slcr_cpu_reset(void) +{ + /* + * Unlock the SLCR then reset the system. + * Note that this seems to require raw i/o + * functions or there's a lockup? + */ + zynq_slcr_unlock(); + + /* + * Clear 0x0F000000 bits of reboot status register to workaround + * the FSBL not loading the bitstream after soft-reboot + * This is a temporary solution until we know more. + */ + clrbits_le32(&slcr_base->reboot_status, 0xF000000); + + writel(1, &slcr_base->pss_rst_ctrl); +} diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds index 2c823e1065..8345b55032 100644 --- a/arch/arm/cpu/ixp/u-boot.lds +++ b/arch/arm/cpu/ixp/u-boot.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); @@ -67,11 +67,17 @@ SECTIONS _end = .; - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - __bss_end = .; + __bss_end = .; + } + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); } /DISCARD/ : { *(.dynstr*) } diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c index 52b3ec47aa..4983a05090 100644 --- a/arch/arm/cpu/tegra114-common/pinmux.c +++ b/arch/arm/cpu/tegra114-common/pinmux.c @@ -37,6 +37,20 @@ struct tegra_pingroup_desc { #define PMUX_OD_SHIFT 6 #define PMUX_LOCK_SHIFT 7 #define PMUX_IO_RESET_SHIFT 8 +#define PMUX_RCV_SEL_SHIFT 9 + +#define PGRP_HSM_SHIFT 2 +#define PGRP_SCHMT_SHIFT 3 +#define PGRP_LPMD_SHIFT 4 +#define PGRP_LPMD_MASK (3 << PGRP_LPMD_SHIFT) +#define PGRP_DRVDN_SHIFT 12 +#define PGRP_DRVDN_MASK (0x7F << PGRP_DRVDN_SHIFT) +#define PGRP_DRVUP_SHIFT 20 +#define PGRP_DRVUP_MASK (0x7F << PGRP_DRVUP_SHIFT) +#define PGRP_SLWR_SHIFT 28 +#define PGRP_SLWR_MASK (3 << PGRP_SLWR_SHIFT) +#define PGRP_SLWF_SHIFT 30 +#define PGRP_SLWF_MASK (3 << PGRP_SLWF_SHIFT) /* Convenient macro for defining pin group properties */ #define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \ @@ -58,6 +72,10 @@ struct tegra_pingroup_desc { #define PINO(pg_name, vdd, f0, f1, f2, f3) \ PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT) +/* A pin group number which is not used */ +#define PIN_RESERVED \ + PIN(NONE, NONE, INVALID, INVALID, INVALID, INVALID, NONE) + const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { /* NAME VDD f0 f1 f2 f3 */ PINI(ULPI_DATA0, BB, SPI3, HSI, UARTA, ULPI), @@ -84,71 +102,71 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { PINI(SDMMC1_DAT2, SDMMC1, SDMMC1, PWM0, SPI4, UARTA), PINI(SDMMC1_DAT1, SDMMC1, SDMMC1, PWM1, SPI4, UARTA), PINI(SDMMC1_DAT0, SDMMC1, SDMMC1, RSVD2, SPI4, UARTA), - PINI(GPIO_PV2, BB, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(GPIO_PV3, BB, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3060 - 0x3064 */ + PIN_RESERVED, PINI(CLK2_OUT, SDMMC1, EXTPERIPH2, RSVD2, RSVD3, RSVD4), PINI(CLK2_REQ, SDMMC1, DAP, RSVD2, RSVD3, RSVD4), - PINO(LCD_PWR1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_PWR2, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_SDIN, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_SDOUT, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_WR_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_CS0_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_DC0, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_SCK, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_PWR0, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_PCLK, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_DE, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D0, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D2, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D3, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D4, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D5, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D6, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D7, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D8, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D9, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D10, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D11, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D12, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D13, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D14, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D15, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D16, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D17, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D18, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D19, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D20, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D21, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D22, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D23, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_CS1_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_M1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_DC1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3070 - 0x310c */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, PINI(HDMI_INT, LCD, RSVD1, RSVD2, RSVD3, RSVD4), PINI(DDC_SCL, LCD, I2C4, RSVD2, RSVD3, RSVD4), PINI(DDC_SDA, LCD, I2C4, RSVD2, RSVD3, RSVD4), - PINI(CRT_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(CRT_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D0, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D1, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D2, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D3, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D4, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D5, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D6, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D7, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D8, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D9, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D10, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D11, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_PCLK, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_MCLK, VI, RSVD1, RSVD3, RSVD3, RSVD4), - PINI(VI_VSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_HSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x311c - 0x3160 */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, PINI(UART2_RXD, UART, UARTB, SPDIF, UARTA, SPI4), PINI(UART2_TXD, UART, UARTB, SPDIF, UARTA, SPI4), PINI(UART2_RTS_N, UART, UARTA, UARTB, RSVD3, SPI4), @@ -220,8 +238,8 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { PINI(SDMMC4_DAT5, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), PINI(SDMMC4_DAT6, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), PINI(SDMMC4_DAT7, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4), - PINI(SDMMC4_RST_N, SDMMC4, RSVD1, RSVD2, RSVD3, SDMMC4), - PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT2, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3280 */ + PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT3, RSVD4), PINI(GPIO_PCC1, CAM, I2S4, RSVD2, RSVD3, RSVD4), PINI(GPIO_PBB0, CAM, I2S4, VI, VI_ALT1, VI_ALT3), PINI(CAM_I2C_SCL, CAM, VGP1, I2C3, RSVD3, RSVD4), @@ -246,11 +264,11 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { PINI(KB_ROW8, SYS, KBC, RSVD2, RSVD3, UARTA), PINI(KB_ROW9, SYS, KBC, RSVD2, RSVD3, UARTA), PINI(KB_ROW10, SYS, KBC, RSVD2, RSVD3, UARTA), - PINI(KB_ROW11, SYS, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(KB_ROW12, SYS, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(KB_ROW13, SYS, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(KB_ROW14, SYS, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(KB_ROW15, SYS, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x32e8 - 0x32f8 */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, PINI(KB_COL0, SYS, KBC, USB, SPI2, EMC_DLL), PINI(KB_COL1, SYS, KBC, RSVD2, SPI2, EMC_DLL), PINI(KB_COL2, SYS, KBC, RSVD2, SPI2, RSVD4), @@ -278,36 +296,46 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { PINI(DAP2_DIN, AUDIO, I2S1, HDA, RSVD3, RSVD4), PINI(DAP2_DOUT, AUDIO, I2S1, HDA, RSVD3, RSVD4), PINI(DAP2_SCLK, AUDIO, I2S1, HDA, RSVD3, RSVD4), - PINI(SPI2_MOSI, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), - PINI(SPI2_MISO, AUDIO, SPI6, RSVD2, RSVD3, RSVD4), - PINI(SPI2_CS0_N, AUDIO, SPI6, SPI1, RSVD3, RSVD4), - PINI(SPI2_SCK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), - PINI(SPI1_MOSI, AUDIO, RSVD1, SPI1, SPI2, DAP2), - PINI(SPI1_SCK, AUDIO, RSVD1, SPI1, SPI2, RSVD4), - PINI(SPI1_CS0_N, AUDIO, SPI6, SPI1, SPI2, RSVD4), - PINI(SPI1_MISO, AUDIO, RSVD1, SPI1, SPI2, RSVD4), - PINI(SPI2_CS1_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(SPI2_CS2_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(DVFS_PWM, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), + PINI(GPIO_X1_AUD, AUDIO, SPI6, RSVD2, RSVD3, RSVD4), + PINI(GPIO_X3_AUD, AUDIO, SPI6, SPI1, RSVD3, RSVD4), + PINI(DVFS_CLK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), + PINI(GPIO_X4_AUD, AUDIO, RSVD1, SPI1, SPI2, DAP2), + PINI(GPIO_X5_AUD, AUDIO, RSVD1, SPI1, SPI2, RSVD4), + PINI(GPIO_X6_AUD, AUDIO, SPI6, SPI1, SPI2, RSVD4), + PINI(GPIO_X7_AUD, AUDIO, RSVD1, SPI1, SPI2, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3388 - 0x338c */ + PIN_RESERVED, PINI(SDMMC3_CLK, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3), PINI(SDMMC3_CMD, SDMMC3, SDMMC3, PWM3, UARTA, SPI3), PINI(SDMMC3_DAT0, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3), PINI(SDMMC3_DAT1, SDMMC3, SDMMC3, PWM2, UARTA, SPI3), PINI(SDMMC3_DAT2, SDMMC3, SDMMC3, PWM1, DISPA, SPI3), PINI(SDMMC3_DAT3, SDMMC3, SDMMC3, PWM0, DISPB, SPI3), - PINI(SDMMC3_DAT4, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(SDMMC3_DAT5, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(SDMMC3_DAT6, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(SDMMC3_DAT7, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x33a8 - 0x33dc */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, PINI(HDMI_CEC, SYS, CEC, SDMMC3, RSVD3, SOC), PINI(SDMMC1_WP_N, SDMMC1, SDMMC1, CLK12, SPI4, UARTA), - PINI(SDMMC3_CD_N, SDMMC3, SDMMC3, OWR, RSVD3, RSVD4), - PINI(SPI1_CS1_N, AUDIO, SPI6, RSVD2, SPI2, I2C1), - PINI(SPI1_CS2_N, AUDIO, SPI6, SPI1, SPI2, I2C1), - PINI(USB_VBUS_EN0, SYS, USB, RSVD2, RSVD3, RSVD4), - PINI(USB_VBUS_EN1, SYS, USB, RSVD2, RSVD3, RSVD4), + PINI(SDMMC3_CD_N, SYS, SDMMC3, OWR, RSVD3, RSVD4), + PINI(GPIO_W2_AUD, AUDIO, SPI6, RSVD2, SPI2, I2C1), + PINI(GPIO_W3_AUD, AUDIO, SPI6, SPI1, SPI2, I2C1), + PINI(USB_VBUS_EN0, LCD, USB, RSVD2, RSVD3, RSVD4), + PINI(USB_VBUS_EN1, LCD, USB, RSVD2, RSVD3, RSVD4), PINI(SDMMC3_CLK_LB_IN, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), - PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), - PINO(NAND_GMI_CLK_LB, GMI, SDMMC2, NAND, GMI, RSVD4), + PINI(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3404 */ PINO(RESET_OUT_N, SYS, RSVD1, RSVD2, RSVD3, RESET_OUT_N), }; @@ -484,6 +512,30 @@ static int pinmux_set_ioreset(enum pmux_pingrp pin, return 0; } +static int pinmux_set_rcv_sel(enum pmux_pingrp pin, + enum pmux_pin_rcv_sel rcv_sel) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_rcv_sel = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and rcv_sel */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_rcv_sel_isvalid(rcv_sel)); + + if (rcv_sel == PMUX_PIN_RCV_SEL_DEFAULT) + return 0; + + reg = readl(pin_rcv_sel); + reg &= ~(0x1 << PMUX_RCV_SEL_SHIFT); + if (rcv_sel == PMUX_PIN_RCV_SEL_HIGH) + reg |= (0x1 << PMUX_RCV_SEL_SHIFT); + writel(reg, pin_rcv_sel); + + return 0; +} + void pinmux_config_pingroup(struct pingroup_config *config) { enum pmux_pingrp pin = config->pingroup; @@ -495,6 +547,7 @@ void pinmux_config_pingroup(struct pingroup_config *config) pinmux_set_lock(pin, config->lock); pinmux_set_od(pin, config->od); pinmux_set_ioreset(pin, config->ioreset); + pinmux_set_rcv_sel(pin, config->rcv_sel); } void pinmux_config_table(struct pingroup_config *config, int len) @@ -504,3 +557,184 @@ void pinmux_config_table(struct pingroup_config *config, int len) for (i = 0; i < len; i++) pinmux_config_pingroup(&config[i]); } + +static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad, int slwf) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwf = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwf */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwf)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwf == PGRP_SLWF_NONE) + return 0; + + reg = readl(pad_slwf); + reg &= ~PGRP_SLWF_MASK; + reg |= (slwf << PGRP_SLWF_SHIFT); + writel(reg, pad_slwf); + + return 0; +} + +static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwr = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwr */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwr)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwr == PGRP_SLWR_NONE) + return 0; + + reg = readl(pad_slwr); + reg &= ~PGRP_SLWR_MASK; + reg |= (slwr << PGRP_SLWR_SHIFT); + writel(reg, pad_slwr); + + return 0; +} + +static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvup = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvup */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvup)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvup == PGRP_DRVUP_NONE) + return 0; + + reg = readl(pad_drvup); + reg &= ~PGRP_DRVUP_MASK; + reg |= (drvup << PGRP_DRVUP_SHIFT); + writel(reg, pad_drvup); + + return 0; +} + +static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvdn = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvdn */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvdn)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvdn == PGRP_DRVDN_NONE) + return 0; + + reg = readl(pad_drvdn); + reg &= ~PGRP_DRVDN_MASK; + reg |= (drvdn << PGRP_DRVDN_SHIFT); + writel(reg, pad_drvdn); + + return 0; +} + +static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_lpmd = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad and lpmd value */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_lpmd_isvalid(lpmd)); + + /* NONE means unspecified/do not change/use POR value */ + if (lpmd == PGRP_LPMD_NONE) + return 0; + + reg = readl(pad_lpmd); + reg &= ~PGRP_LPMD_MASK; + reg |= (lpmd << PGRP_LPMD_SHIFT); + writel(reg, pad_lpmd); + + return 0; +} + +static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_schmt = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + /* NONE means unspecified/do not change/use POR value */ + if (schmt == PGRP_SCHMT_NONE) + return 0; + + reg = readl(pad_schmt); + reg &= ~(1 << PGRP_SCHMT_SHIFT); + if (schmt == PGRP_SCHMT_ENABLE) + reg |= (0x1 << PGRP_SCHMT_SHIFT); + writel(reg, pad_schmt); + + return 0; +} +static int padgrp_set_hsm(enum pdrive_pingrp pad, enum pgrp_hsm hsm) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_hsm = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + /* NONE means unspecified/do not change/use POR value */ + if (hsm == PGRP_HSM_NONE) + return 0; + + reg = readl(pad_hsm); + reg &= ~(1 << PGRP_HSM_SHIFT); + if (hsm == PGRP_HSM_ENABLE) + reg |= (0x1 << PGRP_HSM_SHIFT); + writel(reg, pad_hsm); + + return 0; +} + +void padctrl_config_pingroup(struct padctrl_config *config) +{ + enum pdrive_pingrp pad = config->padgrp; + + padgrp_set_drvup_slwf(pad, config->slwf); + padgrp_set_drvdn_slwr(pad, config->slwr); + padgrp_set_drvup(pad, config->drvup); + padgrp_set_drvdn(pad, config->drvdn); + padgrp_set_lpmd(pad, config->lpmd); + padgrp_set_schmt(pad, config->schmt); + padgrp_set_hsm(pad, config->hsm); +} + +void padgrp_config_table(struct padctrl_config *config, int len) +{ + int i; + + for (i = 0; i < len; i++) + padctrl_config_pingroup(&config[i]); +} diff --git a/arch/arm/cpu/tegra30-common/pinmux.c b/arch/arm/cpu/tegra30-common/pinmux.c index 122665fd3c..eecf0580bc 100644 --- a/arch/arm/cpu/tegra30-common/pinmux.c +++ b/arch/arm/cpu/tegra30-common/pinmux.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -38,6 +38,19 @@ struct tegra_pingroup_desc { #define PMUX_LOCK_SHIFT 7 #define PMUX_IO_RESET_SHIFT 8 +#define PGRP_HSM_SHIFT 2 +#define PGRP_SCHMT_SHIFT 3 +#define PGRP_LPMD_SHIFT 4 +#define PGRP_LPMD_MASK (3 << PGRP_LPMD_SHIFT) +#define PGRP_DRVDN_SHIFT 12 +#define PGRP_DRVDN_MASK (0x7F << PGRP_DRVDN_SHIFT) +#define PGRP_DRVUP_SHIFT 20 +#define PGRP_DRVUP_MASK (0x7F << PGRP_DRVUP_SHIFT) +#define PGRP_SLWR_SHIFT 28 +#define PGRP_SLWR_MASK (3 << PGRP_SLWR_SHIFT) +#define PGRP_SLWF_SHIFT 30 +#define PGRP_SLWF_MASK (3 << PGRP_SLWF_SHIFT) + /* Convenient macro for defining pin group properties */ #define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \ { \ @@ -504,3 +517,178 @@ void pinmux_config_table(struct pingroup_config *config, int len) for (i = 0; i < len; i++) pinmux_config_pingroup(&config[i]); } + +static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad, + int slwf) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwf = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwf */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwf)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwf == PGRP_SLWF_NONE) + return 0; + + reg = readl(pad_slwf); + reg &= ~PGRP_SLWF_MASK; + reg |= (slwf << PGRP_SLWF_SHIFT); + writel(reg, pad_slwf); + + return 0; +} + +static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwr = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwr */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwr)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwr == PGRP_SLWR_NONE) + return 0; + + reg = readl(pad_slwr); + reg &= ~PGRP_SLWR_MASK; + reg |= (slwr << PGRP_SLWR_SHIFT); + writel(reg, pad_slwr); + + return 0; +} + +static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvup = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvup */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvup)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvup == PGRP_DRVUP_NONE) + return 0; + + reg = readl(pad_drvup); + reg &= ~PGRP_DRVUP_MASK; + reg |= (drvup << PGRP_DRVUP_SHIFT); + writel(reg, pad_drvup); + + return 0; +} + +static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvdn = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvdn */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvdn)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvdn == PGRP_DRVDN_NONE) + return 0; + + reg = readl(pad_drvdn); + reg &= ~PGRP_DRVDN_MASK; + reg |= (drvdn << PGRP_DRVDN_SHIFT); + writel(reg, pad_drvdn); + + return 0; +} + +static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_lpmd = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad and lpmd value */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_lpmd_isvalid(lpmd)); + + /* NONE means unspecified/do not change/use POR value */ + if (lpmd == PGRP_LPMD_NONE) + return 0; + + reg = readl(pad_lpmd); + reg &= ~PGRP_LPMD_MASK; + reg |= (lpmd << PGRP_LPMD_SHIFT); + writel(reg, pad_lpmd); + + return 0; +} + +static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_schmt = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + reg = readl(pad_schmt); + reg &= ~(1 << PGRP_SCHMT_SHIFT); + if (schmt == PGRP_SCHMT_ENABLE) + reg |= (0x1 << PGRP_SCHMT_SHIFT); + writel(reg, pad_schmt); + + return 0; +} +static int padgrp_set_hsm(enum pdrive_pingrp pad, + enum pgrp_hsm hsm) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_hsm = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + reg = readl(pad_hsm); + reg &= ~(1 << PGRP_HSM_SHIFT); + if (hsm == PGRP_HSM_ENABLE) + reg |= (0x1 << PGRP_HSM_SHIFT); + writel(reg, pad_hsm); + + return 0; +} + +void padctrl_config_pingroup(struct padctrl_config *config) +{ + enum pdrive_pingrp pad = config->padgrp; + + padgrp_set_drvup_slwf(pad, config->slwf); + padgrp_set_drvdn_slwr(pad, config->slwr); + padgrp_set_drvup(pad, config->drvup); + padgrp_set_drvdn(pad, config->drvdn); + padgrp_set_lpmd(pad, config->lpmd); + padgrp_set_schmt(pad, config->schmt); + padgrp_set_hsm(pad, config->hsm); +} + +void padgrp_config_table(struct padctrl_config *config, int len) +{ + int i; + + for (i = 0; i < len; i++) + padctrl_config_pingroup(&config[i]); +} diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds new file mode 100644 index 0000000000..3c0d99ca36 --- /dev/null +++ b/arch/arm/cpu/u-boot-spl.lds @@ -0,0 +1,93 @@ +/* + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + __image_copy_start = .; + CPUDIR/start.o (.text*) + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data*) + } + + . = ALIGN(4); + + . = .; + + __image_copy_end = .; + + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + _end = .; + + /* + * Deprecated: this MMU section is used by pxa at present but + * should not be used by new boards/CPUs. + */ + . = ALIGN(4096); + .mmutable : { + *(.mmutable) + } + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } +} + +#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE) +ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big"); +#endif diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index b337e7bf51..3a1083d9a9 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -52,7 +52,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); @@ -81,11 +81,18 @@ SECTIONS *(.mmutable) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - __bss_end = .; + __bss_end = .; + } + + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); } /DISCARD/ : { *(.dynstr*) } diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi index d06cd126dd..701c0f9aff 100644 --- a/arch/arm/dts/tegra114.dtsi +++ b/arch/arm/dts/tegra114.dtsi @@ -1,5 +1,78 @@ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "nvidia,tegra114"; + + tegra_car: clock { + compatible = "nvidia,tegra114-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + }; + + gpio: gpio { + compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 12>; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 54>; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 67>; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 103>; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + status = "disabled"; + }; }; diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi index 9a8968522e..3805750581 100644 --- a/arch/arm/dts/tegra20.dtsi +++ b/arch/arm/dts/tegra20.dtsi @@ -1,4 +1,4 @@ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "nvidia,tegra20"; @@ -318,24 +318,32 @@ sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; - interrupts = < 46 >; + interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; + status = "disabled"; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; - interrupts = < 47 >; + interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; + status = "disabled"; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; - interrupts = < 51 >; + interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; + status = "disabled"; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; - interrupts = < 63 >; + interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; + status = "disabled"; }; }; diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi index 7b8126f7cc..ccf154f1e7 100644 --- a/arch/arm/dts/tegra30.dtsi +++ b/arch/arm/dts/tegra30.dtsi @@ -1,10 +1,10 @@ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "nvidia,tegra30"; - tegra_car: clock@60006000 { - compatible = "nvidia,tegra30-car", "nvidia,tegra20-car"; + tegra_car: clock { + compatible = "nvidia,tegra30-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; }; @@ -44,51 +44,79 @@ 0 141 0x04 0 142 0x04 0 143 0x04>; + clocks = <&tegra_car 34>; + }; + + gpio: gpio { + compatible = "nvidia,tegra30-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; i2c@7000c000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C000 0x100>; - /* PERIPH_ID_I2C1, CLK_M */ - clocks = <&tegra_car 12>; + clocks = <&tegra_car 12>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; i2c@7000c400 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C400 0x100>; - /* PERIPH_ID_I2C2, CLK_M */ - clocks = <&tegra_car 54>; + clocks = <&tegra_car 54>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; i2c@7000c500 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C500 0x100>; - /* PERIPH_ID_I2C3, CLK_M */ - clocks = <&tegra_car 67>; + clocks = <&tegra_car 67>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; i2c@7000c700 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C700 0x100>; - /* PERIPH_ID_I2C4, CLK_M */ - clocks = <&tegra_car 103>; + clocks = <&tegra_car 103>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; i2c@7000d000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000D000 0x100>; - /* PERIPH_ID_I2C_DVC, CLK_M */ - clocks = <&tegra_car 47>; + clocks = <&tegra_car 47>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; spi@7000d400 { @@ -98,9 +126,8 @@ nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC1, PLLP_OUT0 */ clocks = <&tegra_car 41>; + status = "disabled"; }; spi@7000d600 { @@ -110,9 +137,8 @@ nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC2, PLLP_OUT0 */ clocks = <&tegra_car 44>; + status = "disabled"; }; spi@7000d800 { @@ -122,9 +148,8 @@ nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC3, PLLP_OUT0 */ clocks = <&tegra_car 46>; + status = "disabled"; }; spi@7000da00 { @@ -134,9 +159,8 @@ nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC4, PLLP_OUT0 */ clocks = <&tegra_car 68>; + status = "disabled"; }; spi@7000dc00 { @@ -146,9 +170,8 @@ nvidia,dma-request-selector = <&apbdma 27>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC5, PLLP_OUT0 */ clocks = <&tegra_car 104>; + status = "disabled"; }; spi@7000de00 { @@ -158,8 +181,39 @@ nvidia,dma-request-selector = <&apbdma 28>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC6, PLLP_OUT0 */ clocks = <&tegra_car 105>; + status = "disabled"; + }; + + sdhci@78000000 { + compatible = "nvidia,tegra30-sdhci"; + reg = <0x78000000 0x200>; + interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; + status = "disabled"; + }; + + sdhci@78000200 { + compatible = "nvidia,tegra30-sdhci"; + reg = <0x78000200 0x200>; + interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; + status = "disabled"; + }; + + sdhci@78000400 { + compatible = "nvidia,tegra30-sdhci"; + reg = <0x78000400 0x200>; + interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; + status = "disabled"; + }; + + sdhci@78000600 { + compatible = "nvidia,tegra30-sdhci"; + reg = <0x78000600 0x200>; + interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; + status = "disabled"; }; }; diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index 1f597c0eec..33c9c83892 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -16,148 +16,12 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* * OMAP HSMMC register definitions */ #define OMAP_HSMMC1_BASE 0x48060100 #define OMAP_HSMMC2_BASE 0x481D8100 -typedef struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -} hsmmc_t; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 644ff353fe..e961ce0578 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -29,6 +29,7 @@ #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ #define BOOT_DEVICE_SPI 11 #define BOOT_DEVICE_UART 65 +#define BOOT_DEVICE_USBETH 68 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF #endif diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 588d8de82f..97ab60d1b2 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -35,5 +35,7 @@ void ddr_pll_config(unsigned int ddrpll_M); void sdelay(unsigned long); void gpmc_init(void); +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size); void omap_nand_switch_ecc(int); #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index de0f1b1923..b7d1932f42 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -140,12 +140,6 @@ /* * Cpu Name */ -#define CONFIG_SYS_AT91_G15_CPU_NAME "AT91SAM9G15" -#define CONFIG_SYS_AT91_G25_CPU_NAME "AT91SAM9G25" -#define CONFIG_SYS_AT91_G35_CPU_NAME "AT91SAM9G35" -#define CONFIG_SYS_AT91_X25_CPU_NAME "AT91SAM9X25" -#define CONFIG_SYS_AT91_X35_CPU_NAME "AT91SAM9X35" -#define CONFIG_SYS_AT91_UNKNOWN_CPU "Unknown CPU type" #define ATMEL_CPU_NAME get_cpu_name() /* diff --git a/arch/arm/include/asm/arch-davinci/gpio.h b/arch/arm/include/asm/arch-davinci/gpio.h index 5206b12211..06390c85e1 100644 --- a/arch/arm/include/asm/arch-davinci/gpio.h +++ b/arch/arm/include/asm/arch-davinci/gpio.h @@ -65,15 +65,16 @@ struct davinci_gpio_bank { #define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67) #define davinci_gpio_bank8 ((struct davinci_gpio *)DAVINCI_GPIO_BANK8) +#define gpio_status() gpio_info() +#define GPIO_NAME_SIZE 20 #if defined(CONFIG_SOC_DM644X) /* GPIO0 to GPIO53, omit the V3.3 volts one */ #define MAX_NUM_GPIOS 70 +#elif defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850) +#define MAX_NUM_GPIOS 128 #else #define MAX_NUM_GPIOS 144 #endif - -#define gpio_status() gpio_info() -#define GPIO_NAME_SIZE 20 #define GPIO_BANK(gp) (davinci_gpio_bank01 + ((gp) >> 5)) #define GPIO_BIT(gp) ((gp) & 0x1F) diff --git a/arch/arm/include/asm/arch-mx35/spl.h b/arch/arm/include/asm/arch-mx35/spl.h index 91d11ae847..3ca4c94680 100644 --- a/arch/arm/include/asm/arch-mx35/spl.h +++ b/arch/arm/include/asm/arch-mx35/spl.h @@ -27,7 +27,7 @@ #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 #define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_ONENAND 4 #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 7 diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index d670f30c02..76764571a7 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -20,6 +20,17 @@ #ifndef __ARCH_ARM_MACH_MX6_CCM_REGS_H__ #define __ARCH_ARM_MACH_MX6_CCM_REGS_H__ +#define CCM_CCGR0 0x020C4068 +#define CCM_CCGR1 0x020C406c +#define CCM_CCGR2 0x020C4070 +#define CCM_CCGR3 0x020C4074 +#define CCM_CCGR4 0x020C4078 +#define CCM_CCGR5 0x020C407c +#define CCM_CCGR6 0x020C4080 + +#define PMU_MISC2 0x020C8170 + +#ifndef __ASSEMBLY__ struct mxc_ccm_reg { u32 ccr; /* 0x0000 */ u32 ccdr; @@ -105,6 +116,7 @@ struct mxc_ccm_reg { u32 analog_pfd_528_clr; u32 analog_pfd_528_tog; }; +#endif /* Define the bits in register CCR */ #define MXC_CCM_CCR_RBC_EN (1 << 27) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 3eb0081ca8..eaa7439486 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -601,5 +601,13 @@ struct iomuxc_base_regs { u32 daisy[104]; /* 0x7b0..94c */ }; +struct wdog_regs { + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ + u16 wicr; /* Interrupt Control */ + u16 wmcr; /* Miscellaneous Control */ +}; + #endif /* __ASSEMBLER__*/ #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h index d23abd764a..d67f600068 100644 --- a/arch/arm/include/asm/arch-mx6/iomux.h +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -16,6 +16,11 @@ #ifndef __ASM_ARCH_IOMUX_H__ #define __ASM_ARCH_IOMUX_H__ + +#define MX6_IOMUXC_GPR4 0x020e0010 +#define MX6_IOMUXC_GPR6 0x020e0018 +#define MX6_IOMUXC_GPR7 0x020e001c + /* * IOMUXC_GPR13 bit fields */ diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h new file mode 100644 index 0000000000..1fdc1d48b3 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2013 Boundary Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MX6_DDR_H__ +#define __ASM_ARCH_MX6_DDR_H__ + +#ifdef CONFIG_MX6Q +#include "mx6q-ddr.h" +#else +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#include "mx6dl-ddr.h" +#else +#error "Please select cpu" +#endif /* CONFIG_MX6DL or CONFIG_MX6S */ +#endif /* CONFIG_MX6Q */ + +#define MX6_MMDC_P0_MDCTL 0x021b0000 +#define MX6_MMDC_P0_MDPDC 0x021b0004 +#define MX6_MMDC_P0_MDOTC 0x021b0008 +#define MX6_MMDC_P0_MDCFG0 0x021b000c +#define MX6_MMDC_P0_MDCFG1 0x021b0010 +#define MX6_MMDC_P0_MDCFG2 0x021b0014 +#define MX6_MMDC_P0_MDMISC 0x021b0018 +#define MX6_MMDC_P0_MDSCR 0x021b001c +#define MX6_MMDC_P0_MDREF 0x021b0020 +#define MX6_MMDC_P0_MDRWD 0x021b002c +#define MX6_MMDC_P0_MDOR 0x021b0030 +#define MX6_MMDC_P0_MDASP 0x021b0040 +#define MX6_MMDC_P0_MAPSR 0x021b0404 +#define MX6_MMDC_P0_MPZQHWCTRL 0x021b0800 +#define MX6_MMDC_P0_MPWLDECTRL0 0x021b080c +#define MX6_MMDC_P0_MPWLDECTRL1 0x021b0810 +#define MX6_MMDC_P0_MPODTCTRL 0x021b0818 +#define MX6_MMDC_P0_MPRDDQBY0DL 0x021b081c +#define MX6_MMDC_P0_MPRDDQBY1DL 0x021b0820 +#define MX6_MMDC_P0_MPRDDQBY2DL 0x021b0824 +#define MX6_MMDC_P0_MPRDDQBY3DL 0x021b0828 +#define MX6_MMDC_P0_MPDGCTRL0 0x021b083c +#define MX6_MMDC_P0_MPDGCTRL1 0x021b0840 +#define MX6_MMDC_P0_MPRDDLCTL 0x021b0848 +#define MX6_MMDC_P0_MPWRDLCTL 0x021b0850 +#define MX6_MMDC_P0_MPMUR0 0x021b08b8 + +#define MX6_MMDC_P1_MDCTL 0x021b4000 +#define MX6_MMDC_P1_MDPDC 0x021b4004 +#define MX6_MMDC_P1_MDOTC 0x021b4008 +#define MX6_MMDC_P1_MDCFG0 0x021b400c +#define MX6_MMDC_P1_MDCFG1 0x021b4010 +#define MX6_MMDC_P1_MDCFG2 0x021b4014 +#define MX6_MMDC_P1_MDMISC 0x021b4018 +#define MX6_MMDC_P1_MDSCR 0x021b401c +#define MX6_MMDC_P1_MDREF 0x021b4020 +#define MX6_MMDC_P1_MDRWD 0x021b402c +#define MX6_MMDC_P1_MDOR 0x021b4030 +#define MX6_MMDC_P1_MDASP 0x021b4040 +#define MX6_MMDC_P1_MAPSR 0x021b4404 +#define MX6_MMDC_P1_MPZQHWCTRL 0x021b4800 +#define MX6_MMDC_P1_MPWLDECTRL0 0x021b480c +#define MX6_MMDC_P1_MPWLDECTRL1 0x021b4810 +#define MX6_MMDC_P1_MPODTCTRL 0x021b4818 +#define MX6_MMDC_P1_MPRDDQBY0DL 0x021b481c +#define MX6_MMDC_P1_MPRDDQBY1DL 0x021b4820 +#define MX6_MMDC_P1_MPRDDQBY2DL 0x021b4824 +#define MX6_MMDC_P1_MPRDDQBY3DL 0x021b4828 +#define MX6_MMDC_P1_MPDGCTRL0 0x021b483c +#define MX6_MMDC_P1_MPDGCTRL1 0x021b4840 +#define MX6_MMDC_P1_MPRDDLCTL 0x021b4848 +#define MX6_MMDC_P1_MPWRDLCTL 0x021b4850 +#define MX6_MMDC_P1_MPMUR0 0x021b48b8 + +#endif /*__ASM_ARCH_MX6_DDR_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h new file mode 100644 index 0000000000..63f485666a --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2013 Boundary Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MX6_PINS_H__ +#define __ASM_ARCH_MX6_PINS_H__ + +#ifdef CONFIG_MX6Q +#include "mx6q_pins.h" +#else +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#include "mx6dl_pins.h" +#else +#error "Please select cpu" +#endif /* CONFIG_MX6DL or CONFIG_MX6S */ +#endif /* CONFIG_MX6Q */ + +#endif /*__ASM_ARCH_MX6_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h new file mode 100644 index 0000000000..325da3314a --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2013 Boundary Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MX6DLS_DDR_H__ +#define __ASM_ARCH_MX6DLS_DDR_H__ + +#ifndef CONFIG_MX6DL +#ifndef CONFIG_MX6S +#error "wrong CPU" +#endif +#endif + +#define MX6_IOM_DRAM_DQM0 0x020e0470 +#define MX6_IOM_DRAM_DQM1 0x020e0474 +#define MX6_IOM_DRAM_DQM2 0x020e0478 +#define MX6_IOM_DRAM_DQM3 0x020e047c +#define MX6_IOM_DRAM_DQM4 0x020e0480 +#define MX6_IOM_DRAM_DQM5 0x020e0484 +#define MX6_IOM_DRAM_DQM6 0x020e0488 +#define MX6_IOM_DRAM_DQM7 0x020e048c + +#define MX6_IOM_DRAM_CAS 0x020e0464 +#define MX6_IOM_DRAM_RAS 0x020e0490 +#define MX6_IOM_DRAM_RESET 0x020e0494 +#define MX6_IOM_DRAM_SDCLK_0 0x020e04ac +#define MX6_IOM_DRAM_SDCLK_1 0x020e04b0 +#define MX6_IOM_DRAM_SDBA2 0x020e04a0 +#define MX6_IOM_DRAM_SDCKE0 0x020e04a4 +#define MX6_IOM_DRAM_SDCKE1 0x020e04a8 +#define MX6_IOM_DRAM_SDODT0 0x020e04b4 +#define MX6_IOM_DRAM_SDODT1 0x020e04b8 + +#define MX6_IOM_DRAM_SDQS0 0x020e04bc +#define MX6_IOM_DRAM_SDQS1 0x020e04c0 +#define MX6_IOM_DRAM_SDQS2 0x020e04c4 +#define MX6_IOM_DRAM_SDQS3 0x020e04c8 +#define MX6_IOM_DRAM_SDQS4 0x020e04cc +#define MX6_IOM_DRAM_SDQS5 0x020e04d0 +#define MX6_IOM_DRAM_SDQS6 0x020e04d4 +#define MX6_IOM_DRAM_SDQS7 0x020e04d8 + +#define MX6_IOM_GRP_B0DS 0x020e0764 +#define MX6_IOM_GRP_B1DS 0x020e0770 +#define MX6_IOM_GRP_B2DS 0x020e0778 +#define MX6_IOM_GRP_B3DS 0x020e077c +#define MX6_IOM_GRP_B4DS 0x020e0780 +#define MX6_IOM_GRP_B5DS 0x020e0784 +#define MX6_IOM_GRP_B6DS 0x020e078c +#define MX6_IOM_GRP_B7DS 0x020e0748 +#define MX6_IOM_GRP_ADDDS 0x020e074c +#define MX6_IOM_DDRMODE_CTL 0x020e0750 +#define MX6_IOM_GRP_DDRPKE 0x020e0754 +#define MX6_IOM_GRP_DDRMODE 0x020e0760 +#define MX6_IOM_GRP_CTLDS 0x020e076c +#define MX6_IOM_GRP_DDR_TYPE 0x020e0774 + +#endif /*__ASM_ARCH_MX6S_DDR_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h index 79e2c4f5a4..9494e4126a 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -50,100 +50,103 @@ #define NO_MUX_I 0 #define NO_PAD_I 0 enum { - MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x0514, 0x0144, 1, 0x07D8, 2, 0), - MX6DL_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x0518, 0x0148, 1, 0x07DC, 2, 0), - MX6DL_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x051C, 0x014C, 1, 0x07E0, 2, 0), - MX6DL_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x0520, 0x0150, 5, 0x0000, 0, 0), - MX6DL_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x0528, 0x0158, 5, 0x0000, 0, 0), - MX6DL_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0), - MX6DL_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x0530, 0x0160, 5, 0x0000, 0, 0), - MX6DL_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0000, 0, 0), - MX6DL_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0), - MX6DL_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0), - MX6DL_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0), - MX6DL_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0), - MX6DL_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0), - MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0), - MX6DL_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0), - MX6DL_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0), - MX6DL_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0), - MX6DL_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0), - MX6DL_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0), - MX6DL_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x067C, 0x0294, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x0684, 0x029C, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0), - MX6DL_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, 0), - MX6DL_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, 0), - MX6DL_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, 0), - MX6DL_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, 0), - MX6DL_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x0814, 1, 0), - MX6DL_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x06B0, 0x02C8, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), - MX6DL_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), - MX6DL_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), - MX6DL_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0), - MX6DL_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x08FC, 2, 0), - MX6DL_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), - MX6DL_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x0720, 0x0338, 0, 0x0938, 1, 0), - MX6DL_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), - MX6DL_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0728, 0x0340, 1, 0x0000, 0, 0), - MX6DL_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), - MX6DL_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x0730, 0x0348, 1, 0x0000, 0, 0), - MX6DL_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x0514, 0x0144, 1, 0x07D8, 2, 0), + MX6_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x0518, 0x0148, 1, 0x07DC, 2, 0), + MX6_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x051C, 0x014C, 1, 0x07E0, 2, 0), + MX6_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x0520, 0x0150, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x0528, 0x0158, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0), + MX6_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x0530, 0x0160, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0), + MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0), + MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0), + MX6_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0), + MX6_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0), + MX6_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0), + MX6_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x0660, 0x0278, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x0664, 0x027C, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x0668, 0x0280, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x067C, 0x0294, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x0684, 0x029C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0), + MX6_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, 0), + MX6_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, 0), + MX6_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, 0), + MX6_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, 0), + MX6_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x0814, 1, 0), + MX6_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x06B0, 0x02C8, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0), + MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x08FC, 2, 0), + MX6_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x0720, 0x0338, 0, 0x0938, 1, 0), + MX6_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0728, 0x0340, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x0730, 0x0348, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0000, 0, 0), }; #endif /* __ASM_ARCH_MX6_MX6DL_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6q-ddr.h b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h new file mode 100644 index 0000000000..e51727c389 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2013 Boundary Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MX6Q_DDR_H__ +#define __ASM_ARCH_MX6Q_DDR_H__ + +#ifndef CONFIG_MX6Q +#error "wrong CPU" +#endif + +#define MX6_IOM_DRAM_DQM0 0x020e05ac +#define MX6_IOM_DRAM_DQM1 0x020e05b4 +#define MX6_IOM_DRAM_DQM2 0x020e0528 +#define MX6_IOM_DRAM_DQM3 0x020e0520 +#define MX6_IOM_DRAM_DQM4 0x020e0514 +#define MX6_IOM_DRAM_DQM5 0x020e0510 +#define MX6_IOM_DRAM_DQM6 0x020e05bc +#define MX6_IOM_DRAM_DQM7 0x020e05c4 + +#define MX6_IOM_DRAM_CAS 0x020e056c +#define MX6_IOM_DRAM_RAS 0x020e0578 +#define MX6_IOM_DRAM_RESET 0x020e057c +#define MX6_IOM_DRAM_SDCLK_0 0x020e0588 +#define MX6_IOM_DRAM_SDCLK_1 0x020e0594 +#define MX6_IOM_DRAM_SDBA2 0x020e058c +#define MX6_IOM_DRAM_SDCKE0 0x020e0590 +#define MX6_IOM_DRAM_SDCKE1 0x020e0598 +#define MX6_IOM_DRAM_SDODT0 0x020e059c +#define MX6_IOM_DRAM_SDODT1 0x020e05a0 + +#define MX6_IOM_DRAM_SDQS0 0x020e05a8 +#define MX6_IOM_DRAM_SDQS1 0x020e05b0 +#define MX6_IOM_DRAM_SDQS2 0x020e0524 +#define MX6_IOM_DRAM_SDQS3 0x020e051c +#define MX6_IOM_DRAM_SDQS4 0x020e0518 +#define MX6_IOM_DRAM_SDQS5 0x020e050c +#define MX6_IOM_DRAM_SDQS6 0x020e05b8 +#define MX6_IOM_DRAM_SDQS7 0x020e05c0 + +#define MX6_IOM_GRP_B0DS 0x020e0784 +#define MX6_IOM_GRP_B1DS 0x020e0788 +#define MX6_IOM_GRP_B2DS 0x020e0794 +#define MX6_IOM_GRP_B3DS 0x020e079c +#define MX6_IOM_GRP_B4DS 0x020e07a0 +#define MX6_IOM_GRP_B5DS 0x020e07a4 +#define MX6_IOM_GRP_B6DS 0x020e07a8 +#define MX6_IOM_GRP_B7DS 0x020e0748 +#define MX6_IOM_GRP_ADDDS 0x020e074c +#define MX6_IOM_DDRMODE_CTL 0x020e0750 +#define MX6_IOM_GRP_DDRPKE 0x020e0758 +#define MX6_IOM_GRP_DDRMODE 0x020e0774 +#define MX6_IOM_GRP_CTLDS 0x020e078c +#define MX6_IOM_GRP_DDR_TYPE 0x020e0798 + +#endif /*__ASM_ARCH_MX6Q_DDR_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h new file mode 100644 index 0000000000..1c1c00855f --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -0,0 +1,1671 @@ +/* + * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Auto Generate file, please don't edit it + * + */ + +#ifndef __ASM_ARCH_MX6_MX6Q_PINS_H__ +#define __ASM_ARCH_MX6_MX6Q_PINS_H__ + +#include <asm/imx-common/iomux-v3.h> + +/* Use to set PAD control */ +#define PAD_CTL_HYS (1 << 16) +#define PAD_CTL_PUS_100K_DOWN (0 << 14) +#define PAD_CTL_PUS_47K_UP (1 << 14) +#define PAD_CTL_PUS_100K_UP (2 << 14) +#define PAD_CTL_PUS_22K_UP (3 << 14) + +#define PAD_CTL_PUE (1 << 13) +#define PAD_CTL_PKE (1 << 12) +#define PAD_CTL_ODE (1 << 11) +#define PAD_CTL_SPEED_LOW (1 << 6) +#define PAD_CTL_SPEED_MED (2 << 6) +#define PAD_CTL_SPEED_HIGH (3 << 6) +#define PAD_CTL_DSE_DISABLE (0 << 3) +#define PAD_CTL_DSE_240ohm (1 << 3) +#define PAD_CTL_DSE_120ohm (2 << 3) +#define PAD_CTL_DSE_80ohm (3 << 3) +#define PAD_CTL_DSE_60ohm (4 << 3) +#define PAD_CTL_DSE_48ohm (5 << 3) +#define PAD_CTL_DSE_40ohm (6 << 3) +#define PAD_CTL_DSE_34ohm (7 << 3) +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) + +#define NO_MUX_I 0 +#define NO_PAD_I 0 + +enum { + MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0), + MX6_PAD_SD2_DAT1__WEIM_WEIM_CS_2 = IOMUX_PAD(0x0360, 0x004C, 2, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x0360, 0x004C, 3, 0x07C8, 0, 0), + MX6_PAD_SD2_DAT1__KPP_COL_7 = IOMUX_PAD(0x0360, 0x004C, 4, 0x08F0, 0, 0), + MX6_PAD_SD2_DAT1__GPIO_1_14 = IOMUX_PAD(0x0360, 0x004C, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__CCM_WAIT = IOMUX_PAD(0x0360, 0x004C, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__ANATOP_TESTO_0 = IOMUX_PAD(0x0360, 0x004C, 7, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x0364, 0x0050, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0364, 0x0050, 1, 0x0838, 0, 0), + MX6_PAD_SD2_DAT2__WEIM_WEIM_CS_3 = IOMUX_PAD(0x0364, 0x0050, 2, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x07B8, 0, 0), + MX6_PAD_SD2_DAT2__KPP_ROW_6 = IOMUX_PAD(0x0364, 0x0050, 4, 0x08F8, 0, 0), + MX6_PAD_SD2_DAT2__GPIO_1_13 = IOMUX_PAD(0x0364, 0x0050, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__CCM_STOP = IOMUX_PAD(0x0364, 0x0050, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__ANATOP_TESTO_1 = IOMUX_PAD(0x0364, 0x0050, 7, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0368, 0x0054, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0368, 0x0054, 1, 0x082C, 0, 0), + MX6_PAD_SD2_DAT0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x0368, 0x0054, 3, 0x07B4, 0, 0), + MX6_PAD_SD2_DAT0__KPP_ROW_7 = IOMUX_PAD(0x0368, 0x0054, 4, 0x08FC, 0, 0), + MX6_PAD_SD2_DAT0__GPIO_1_15 = IOMUX_PAD(0x0368, 0x0054, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__DCIC2_DCIC_OUT = IOMUX_PAD(0x0368, 0x0054, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__TESTO_2 = IOMUX_PAD(0x0368, 0x0054, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__USBOH3_H2_DATA = IOMUX_PAD(0x036C, 0x0058, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x036C, 0x0058, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x036C, 0x0058, 2, 0x0918, 0, 0), + MX6_PAD_RGMII_TXC__GPIO_6_19 = IOMUX_PAD(0x036C, 0x0058, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0 = IOMUX_PAD(0x036C, 0x0058, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__ANATOP_24M_OUT = IOMUX_PAD(0x036C, 0x0058, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY = IOMUX_PAD(0x0370, 0x005C, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x0370, 0x005C, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__GPIO_6_20 = IOMUX_PAD(0x0370, 0x005C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1 = IOMUX_PAD(0x0370, 0x005C, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG = IOMUX_PAD(0x0374, 0x0060, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x0374, 0x0060, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__GPIO_6_21 = IOMUX_PAD(0x0374, 0x0060, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2 = IOMUX_PAD(0x0374, 0x0060, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__CCM_PLL3_BYP = IOMUX_PAD(0x0374, 0x0060, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA = IOMUX_PAD(0x0378, 0x0064, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x0378, 0x0064, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__GPIO_6_22 = IOMUX_PAD(0x0378, 0x0064, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3 = IOMUX_PAD(0x0378, 0x0064, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__CCM_PLL2_BYP = IOMUX_PAD(0x0378, 0x0064, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK = IOMUX_PAD(0x037C, 0x0068, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x037C, 0x0068, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__GPIO_6_23 = IOMUX_PAD(0x037C, 0x0068, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4 = IOMUX_PAD(0x037C, 0x0068, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RX_CTL__USBOH3_H3_DATA = IOMUX_PAD(0x0380, 0x006C, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x0380, 0x006C, 1, 0x0858, 0, 0), + MX6_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x0380, 0x006C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5 = IOMUX_PAD(0x0380, 0x006C, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY = IOMUX_PAD(0x0384, 0x0070, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0384, 0x0070, 1, 0x0848, 0, 0), + MX6_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0384, 0x0070, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6 = IOMUX_PAD(0x0384, 0x0070, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE = IOMUX_PAD(0x0388, 0x0074, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x0388, 0x0074, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__GPIO_6_26 = IOMUX_PAD(0x0388, 0x0074, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7 = IOMUX_PAD(0x0388, 0x0074, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__ANATOP_REF_OUT = IOMUX_PAD(0x0388, 0x0074, 7, 0x083C, 0, 0), + MX6_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL = IOMUX_PAD(0x038C, 0x0078, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x038C, 0x0078, 1, 0x084C, 0, 0), + MX6_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x038C, 0x0078, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8 = IOMUX_PAD(0x038C, 0x0078, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RD1__SJC_FAIL = IOMUX_PAD(0x038C, 0x0078, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA = IOMUX_PAD(0x0390, 0x007C, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x0390, 0x007C, 1, 0x0850, 0, 0), + MX6_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x0390, 0x007C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9 = IOMUX_PAD(0x0390, 0x007C, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK = IOMUX_PAD(0x0394, 0x0080, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x0394, 0x0080, 1, 0x0854, 0, 0), + MX6_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x0394, 0x0080, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10 = IOMUX_PAD(0x0394, 0x0080, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RXC__USBOH3_H3_STROBE = IOMUX_PAD(0x0398, 0x0084, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x0398, 0x0084, 1, 0x0844, 0, 0), + MX6_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x0398, 0x0084, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11 = IOMUX_PAD(0x0398, 0x0084, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A25__WEIM_WEIM_A_25 = IOMUX_PAD(0x039C, 0x0088, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A25__ECSPI4_SS1 = IOMUX_PAD(0x039C, 0x0088, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x039C, 0x0088, 2, 0x0000, 0, 0), + MX6_PAD_EIM_A25__IPU1_DI1_PIN12 = IOMUX_PAD(0x039C, 0x0088, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A25__IPU1_DI0_D1_CS = IOMUX_PAD(0x039C, 0x0088, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A25__GPIO_5_2 = IOMUX_PAD(0x039C, 0x0088, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A25__HDMI_TX_CEC_LINE = IOMUX_PAD(0x039C, 0x0088, 6, 0x088C, 0, 0), + MX6_PAD_EIM_A25__PL301_PER1_HBURST_0 = IOMUX_PAD(0x039C, 0x0088, 7, 0x0000, 0, 0), + MX6_PAD_EIM_EB2__WEIM_WEIM_EB_2 = IOMUX_PAD(0x03A0, 0x008C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x03A0, 0x008C, 1, 0x0800, 0, 0), + MX6_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x03A0, 0x008C, 2, 0x07EC, 0, 0), + MX6_PAD_EIM_EB2__IPU2_CSI1_D_19 = IOMUX_PAD(0x03A0, 0x008C, 3, 0x08D4, 0, 0), + MX6_PAD_EIM_EB2__HDMI_TX_DDC_SCL = IOMUX_PAD(0x03A0, 0x008C, 4, 0x0890, 0, 0), + MX6_PAD_EIM_EB2__GPIO_2_30 = IOMUX_PAD(0x03A0, 0x008C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x03A0, 0x008C, 22, 0x08A0, 0, 0), + MX6_PAD_EIM_EB2__SRC_BT_CFG_30 = IOMUX_PAD(0x03A0, 0x008C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D16__WEIM_WEIM_D_16 = IOMUX_PAD(0x03A4, 0x0090, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x03A4, 0x0090, 1, 0x07F4, 0, 0), + MX6_PAD_EIM_D16__IPU1_DI0_PIN5 = IOMUX_PAD(0x03A4, 0x0090, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D16__IPU2_CSI1_D_18 = IOMUX_PAD(0x03A4, 0x0090, 3, 0x08D0, 0, 0), + MX6_PAD_EIM_D16__HDMI_TX_DDC_SDA = IOMUX_PAD(0x03A4, 0x0090, 4, 0x0894, 0, 0), + MX6_PAD_EIM_D16__GPIO_3_16 = IOMUX_PAD(0x03A4, 0x0090, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x03A4, 0x0090, 22, 0x08A4, 0, 0), + MX6_PAD_EIM_D17__WEIM_WEIM_D_17 = IOMUX_PAD(0x03A8, 0x0094, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x03A8, 0x0094, 1, 0x07F8, 0, 0), + MX6_PAD_EIM_D17__IPU1_DI0_PIN6 = IOMUX_PAD(0x03A8, 0x0094, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D17__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x03A8, 0x0094, 3, 0x08E0, 0, 0), + MX6_PAD_EIM_D17__DCIC1_DCIC_OUT = IOMUX_PAD(0x03A8, 0x0094, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D17__GPIO_3_17 = IOMUX_PAD(0x03A8, 0x0094, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x03A8, 0x0094, 22, 0x08A8, 0, 0), + MX6_PAD_EIM_D17__PL301_PER1_HBURST_1 = IOMUX_PAD(0x03A8, 0x0094, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D18__WEIM_WEIM_D_18 = IOMUX_PAD(0x03AC, 0x0098, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x03AC, 0x0098, 1, 0x07FC, 0, 0), + MX6_PAD_EIM_D18__IPU1_DI0_PIN7 = IOMUX_PAD(0x03AC, 0x0098, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D18__IPU2_CSI1_D_17 = IOMUX_PAD(0x03AC, 0x0098, 3, 0x08CC, 0, 0), + MX6_PAD_EIM_D18__IPU1_DI1_D0_CS = IOMUX_PAD(0x03AC, 0x0098, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D18__GPIO_3_18 = IOMUX_PAD(0x03AC, 0x0098, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x03AC, 0x0098, 22, 0x08AC, 0, 0), + MX6_PAD_EIM_D18__PL301_PER1_HBURST_2 = IOMUX_PAD(0x03AC, 0x0098, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D19__WEIM_WEIM_D_19 = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x03B0, 0x009C, 1, 0x0804, 0, 0), + MX6_PAD_EIM_D19__IPU1_DI0_PIN8 = IOMUX_PAD(0x03B0, 0x009C, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D19__IPU2_CSI1_D_16 = IOMUX_PAD(0x03B0, 0x009C, 3, 0x08C8, 0, 0), + MX6_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x03B0, 0x009C, 4, 0x091C, 0, 0), + MX6_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x03B0, 0x009C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x03B0, 0x009C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D19__PL301MX6QPER1_HRESP = IOMUX_PAD(0x03B0, 0x009C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D20__WEIM_WEIM_D_20 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D20__ECSPI4_SS0 = IOMUX_PAD(0x03B4, 0x00A0, 1, 0x0824, 0, 0), + MX6_PAD_EIM_D20__IPU1_DI0_PIN16 = IOMUX_PAD(0x03B4, 0x00A0, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03B4, 0x00A0, 3, 0x08C4, 0, 0), + MX6_PAD_EIM_D20__UART1_CTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x091C, 1, 0), + MX6_PAD_EIM_D20__GPIO_3_20 = IOMUX_PAD(0x03B4, 0x00A0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x03B4, 0x00A0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D21__WEIM_WEIM_D_21 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D21__ECSPI4_SCLK = IOMUX_PAD(0x03B8, 0x00A4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D21__IPU1_DI0_PIN17 = IOMUX_PAD(0x03B8, 0x00A4, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D21__IPU2_CSI1_D_11 = IOMUX_PAD(0x03B8, 0x00A4, 3, 0x08B4, 0, 0), + MX6_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x03B8, 0x00A4, 4, 0x0944, 0, 0), + MX6_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x03B8, 0x00A4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x03B8, 0x00A4, 22, 0x0898, 0, 0), + MX6_PAD_EIM_D21__SPDIF_IN1 = IOMUX_PAD(0x03B8, 0x00A4, 7, 0x0914, 0, 0), + MX6_PAD_EIM_D22__WEIM_WEIM_D_22 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D22__ECSPI4_MISO = IOMUX_PAD(0x03BC, 0x00A8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D22__IPU1_DI0_PIN1 = IOMUX_PAD(0x03BC, 0x00A8, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D22__IPU2_CSI1_D_10 = IOMUX_PAD(0x03BC, 0x00A8, 3, 0x08B0, 0, 0), + MX6_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x03BC, 0x00A8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D22__GPIO_3_22 = IOMUX_PAD(0x03BC, 0x00A8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D22__SPDIF_OUT1 = IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D22__PL301MX6QPER1_HWRITE = IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D23__WEIM_WEIM_D_23 = IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D23__IPU1_DI0_D0_CS = IOMUX_PAD(0x03C0, 0x00AC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x03C0, 0x00AC, 2, 0x092C, 0, 0), + MX6_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x03C0, 0x00AC, 3, 0x0000, 0, 0), + MX6_PAD_EIM_D23__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x03C0, 0x00AC, 4, 0x08D8, 0, 0), + MX6_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D23__IPU1_DI1_PIN2 = IOMUX_PAD(0x03C0, 0x00AC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D23__IPU1_DI1_PIN14 = IOMUX_PAD(0x03C0, 0x00AC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__WEIM_WEIM_EB_3 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__ECSPI4_RDY = IOMUX_PAD(0x03C4, 0x00B0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__UART3_CTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x092C, 1, 0), + MX6_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x03C4, 0x00B0, 3, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__IPU2_CSI1_HSYNC = IOMUX_PAD(0x03C4, 0x00B0, 4, 0x08DC, 0, 0), + MX6_PAD_EIM_EB3__GPIO_2_31 = IOMUX_PAD(0x03C4, 0x00B0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__IPU1_DI1_PIN3 = IOMUX_PAD(0x03C4, 0x00B0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__SRC_BT_CFG_31 = IOMUX_PAD(0x03C4, 0x00B0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D24__WEIM_WEIM_D_24 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D24__ECSPI4_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D24__UART3_TXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D24__UART3_TXD_RXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0930, 0, 0), + MX6_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 3, 0x0808, 0, 0), + MX6_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D24__GPIO_3_24 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x07D8, 0, 0), + MX6_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D25__WEIM_WEIM_D_25 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D25__ECSPI4_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0930, 1, 0), + MX6_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x080C, 0, 0), + MX6_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D25__GPIO_3_25 = IOMUX_PAD(0x03CC, 0x00B8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03CC, 0x00B8, 6, 0x07D4, 0, 0), + MX6_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x03CC, 0x00B8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D26__WEIM_WEIM_D_26 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU1_DI1_PIN11 = IOMUX_PAD(0x03D0, 0x00BC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU1_CSI0_D_1 = IOMUX_PAD(0x03D0, 0x00BC, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU2_CSI1_D_14 = IOMUX_PAD(0x03D0, 0x00BC, 3, 0x08C0, 0, 0), + MX6_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D26__UART2_TXD_RXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0928, 0, 0), + MX6_PAD_EIM_D26__GPIO_3_26 = IOMUX_PAD(0x03D0, 0x00BC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU1_SISG_2 = IOMUX_PAD(0x03D0, 0x00BC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU1_DISP1_DAT_22 = IOMUX_PAD(0x03D0, 0x00BC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D27__WEIM_WEIM_D_27 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU1_DI1_PIN13 = IOMUX_PAD(0x03D4, 0x00C0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU1_CSI0_D_0 = IOMUX_PAD(0x03D4, 0x00C0, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU2_CSI1_D_13 = IOMUX_PAD(0x03D4, 0x00C0, 3, 0x08BC, 0, 0), + MX6_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0928, 1, 0), + MX6_PAD_EIM_D27__GPIO_3_27 = IOMUX_PAD(0x03D4, 0x00C0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU1_SISG_3 = IOMUX_PAD(0x03D4, 0x00C0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU1_DISP1_DAT_23 = IOMUX_PAD(0x03D4, 0x00C0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D28__WEIM_WEIM_D_28 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x03D8, 0x00C4, 17, 0x089C, 0, 0), + MX6_PAD_EIM_D28__ECSPI4_MOSI = IOMUX_PAD(0x03D8, 0x00C4, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D28__IPU2_CSI1_D_12 = IOMUX_PAD(0x03D8, 0x00C4, 3, 0x08B8, 0, 0), + MX6_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x03D8, 0x00C4, 4, 0x0924, 0, 0), + MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x03D8, 0x00C4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D28__IPU1_EXT_TRIG = IOMUX_PAD(0x03D8, 0x00C4, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D28__IPU1_DI0_PIN13 = IOMUX_PAD(0x03D8, 0x00C4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D29__WEIM_WEIM_D_29 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D29__IPU1_DI1_PIN15 = IOMUX_PAD(0x03DC, 0x00C8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D29__ECSPI4_SS0 = IOMUX_PAD(0x03DC, 0x00C8, 2, 0x0824, 1, 0), + MX6_PAD_EIM_D29__UART2_CTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0924, 1, 0), + MX6_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x03DC, 0x00C8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D29__IPU2_CSI1_VSYNC = IOMUX_PAD(0x03DC, 0x00C8, 6, 0x08E4, 0, 0), + MX6_PAD_EIM_D29__IPU1_DI0_PIN14 = IOMUX_PAD(0x03DC, 0x00C8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D30__WEIM_WEIM_D_30 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D30__IPU1_DISP1_DAT_21 = IOMUX_PAD(0x03E0, 0x00CC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D30__IPU1_DI0_PIN11 = IOMUX_PAD(0x03E0, 0x00CC, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D30__IPU1_CSI0_D_3 = IOMUX_PAD(0x03E0, 0x00CC, 3, 0x0000, 0, 0), + MX6_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x03E0, 0x00CC, 4, 0x092C, 2, 0), + MX6_PAD_EIM_D30__GPIO_3_30 = IOMUX_PAD(0x03E0, 0x00CC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x03E0, 0x00CC, 6, 0x0948, 0, 0), + MX6_PAD_EIM_D30__PL301MX6QPER1_HPROT_0 = IOMUX_PAD(0x03E0, 0x00CC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D31__WEIM_WEIM_D_31 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D31__IPU1_DISP1_DAT_20 = IOMUX_PAD(0x03E4, 0x00D0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D31__IPU1_DI0_PIN12 = IOMUX_PAD(0x03E4, 0x00D0, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D31__IPU1_CSI0_D_2 = IOMUX_PAD(0x03E4, 0x00D0, 3, 0x0000, 0, 0), + MX6_PAD_EIM_D31__UART3_CTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x092C, 3, 0), + MX6_PAD_EIM_D31__GPIO_3_31 = IOMUX_PAD(0x03E4, 0x00D0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x03E4, 0x00D0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D31__PL301MX6QPER1_HPROT_1 = IOMUX_PAD(0x03E4, 0x00D0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A24__WEIM_WEIM_A_24 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A24__IPU1_DISP1_DAT_19 = IOMUX_PAD(0x03E8, 0x00D4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A24__IPU2_CSI1_D_19 = IOMUX_PAD(0x03E8, 0x00D4, 2, 0x08D4, 1, 0), + MX6_PAD_EIM_A24__IPU2_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A24__IPU1_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A24__GPIO_5_4 = IOMUX_PAD(0x03E8, 0x00D4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A24__PL301MX6QPER1_HPROT_2 = IOMUX_PAD(0x03E8, 0x00D4, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A24__SRC_BT_CFG_24 = IOMUX_PAD(0x03E8, 0x00D4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A23__WEIM_WEIM_A_23 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A23__IPU1_DISP1_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A23__IPU2_CSI1_D_18 = IOMUX_PAD(0x03EC, 0x00D8, 2, 0x08D0, 1, 0), + MX6_PAD_EIM_A23__IPU2_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A23__IPU1_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A23__GPIO_6_6 = IOMUX_PAD(0x03EC, 0x00D8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A23__PL301MX6QPER1_HPROT_3 = IOMUX_PAD(0x03EC, 0x00D8, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A23__SRC_BT_CFG_23 = IOMUX_PAD(0x03EC, 0x00D8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A22__WEIM_WEIM_A_22 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A22__IPU1_DISP1_DAT_17 = IOMUX_PAD(0x03F0, 0x00DC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A22__IPU2_CSI1_D_17 = IOMUX_PAD(0x03F0, 0x00DC, 2, 0x08CC, 1, 0), + MX6_PAD_EIM_A22__GPIO_2_16 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A22__TPSMP_HDATA_0 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A22__SRC_BT_CFG_22 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A21__WEIM_WEIM_A_21 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A21__IPU1_DISP1_DAT_16 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A21__IPU2_CSI1_D_16 = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x08C8, 1, 0), + MX6_PAD_EIM_A21__RESERVED_RESERVED = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18 = IOMUX_PAD(0x03F4, 0x00E0, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A21__GPIO_2_17 = IOMUX_PAD(0x03F4, 0x00E0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A21__TPSMP_HDATA_1 = IOMUX_PAD(0x03F4, 0x00E0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A21__SRC_BT_CFG_21 = IOMUX_PAD(0x03F4, 0x00E0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A20__WEIM_WEIM_A_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A20__IPU1_DISP1_DAT_15 = IOMUX_PAD(0x03F8, 0x00E4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03F8, 0x00E4, 2, 0x08C4, 1, 0), + MX6_PAD_EIM_A20__RESERVED_RESERVED = IOMUX_PAD(0x03F8, 0x00E4, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19 = IOMUX_PAD(0x03F8, 0x00E4, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A20__GPIO_2_18 = IOMUX_PAD(0x03F8, 0x00E4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A20__TPSMP_HDATA_2 = IOMUX_PAD(0x03F8, 0x00E4, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A20__SRC_BT_CFG_20 = IOMUX_PAD(0x03F8, 0x00E4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A19__WEIM_WEIM_A_19 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A19__IPU1_DISP1_DAT_14 = IOMUX_PAD(0x03FC, 0x00E8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A19__IPU2_CSI1_D_14 = IOMUX_PAD(0x03FC, 0x00E8, 2, 0x08C0, 1, 0), + MX6_PAD_EIM_A19__RESERVED_RESERVED = IOMUX_PAD(0x03FC, 0x00E8, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20 = IOMUX_PAD(0x03FC, 0x00E8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A19__GPIO_2_19 = IOMUX_PAD(0x03FC, 0x00E8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A19__TPSMP_HDATA_3 = IOMUX_PAD(0x03FC, 0x00E8, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A19__SRC_BT_CFG_19 = IOMUX_PAD(0x03FC, 0x00E8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A18__WEIM_WEIM_A_18 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A18__IPU1_DISP1_DAT_13 = IOMUX_PAD(0x0400, 0x00EC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A18__IPU2_CSI1_D_13 = IOMUX_PAD(0x0400, 0x00EC, 2, 0x08BC, 1, 0), + MX6_PAD_EIM_A18__RESERVED_RESERVED = IOMUX_PAD(0x0400, 0x00EC, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21 = IOMUX_PAD(0x0400, 0x00EC, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A18__GPIO_2_20 = IOMUX_PAD(0x0400, 0x00EC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A18__TPSMP_HDATA_4 = IOMUX_PAD(0x0400, 0x00EC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A18__SRC_BT_CFG_18 = IOMUX_PAD(0x0400, 0x00EC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A17__WEIM_WEIM_A_17 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A17__IPU1_DISP1_DAT_12 = IOMUX_PAD(0x0404, 0x00F0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A17__IPU2_CSI1_D_12 = IOMUX_PAD(0x0404, 0x00F0, 2, 0x08B8, 1, 0), + MX6_PAD_EIM_A17__RESERVED_RESERVED = IOMUX_PAD(0x0404, 0x00F0, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22 = IOMUX_PAD(0x0404, 0x00F0, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A17__GPIO_2_21 = IOMUX_PAD(0x0404, 0x00F0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A17__TPSMP_HDATA_5 = IOMUX_PAD(0x0404, 0x00F0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A17__SRC_BT_CFG_17 = IOMUX_PAD(0x0404, 0x00F0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A16__WEIM_WEIM_A_16 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A16__IPU1_DI1_DISP_CLK = IOMUX_PAD(0x0408, 0x00F4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A16__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x0408, 0x00F4, 2, 0x08E0, 1, 0), + MX6_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23 = IOMUX_PAD(0x0408, 0x00F4, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A16__GPIO_2_22 = IOMUX_PAD(0x0408, 0x00F4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A16__TPSMP_HDATA_6 = IOMUX_PAD(0x0408, 0x00F4, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A16__SRC_BT_CFG_16 = IOMUX_PAD(0x0408, 0x00F4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__WEIM_WEIM_CS_0 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__IPU1_DI1_PIN5 = IOMUX_PAD(0x040C, 0x00F8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x040C, 0x00F8, 2, 0x0810, 0, 0), + MX6_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24 = IOMUX_PAD(0x040C, 0x00F8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__GPIO_2_23 = IOMUX_PAD(0x040C, 0x00F8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__TPSMP_HDATA_7 = IOMUX_PAD(0x040C, 0x00F8, 6, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__WEIM_WEIM_CS_1 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__IPU1_DI1_PIN6 = IOMUX_PAD(0x0410, 0x00FC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x0410, 0x00FC, 2, 0x0818, 0, 0), + MX6_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25 = IOMUX_PAD(0x0410, 0x00FC, 4, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__GPIO_2_24 = IOMUX_PAD(0x0410, 0x00FC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__TPSMP_HDATA_8 = IOMUX_PAD(0x0410, 0x00FC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_OE__WEIM_WEIM_OE = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, 0), + MX6_PAD_EIM_OE__IPU1_DI1_PIN7 = IOMUX_PAD(0x0414, 0x0100, 1, 0x0000, 0, 0), + MX6_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x0414, 0x0100, 2, 0x0814, 0, 0), + MX6_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26 = IOMUX_PAD(0x0414, 0x0100, 4, 0x0000, 0, 0), + MX6_PAD_EIM_OE__GPIO_2_25 = IOMUX_PAD(0x0414, 0x0100, 5, 0x0000, 0, 0), + MX6_PAD_EIM_OE__TPSMP_HDATA_9 = IOMUX_PAD(0x0414, 0x0100, 6, 0x0000, 0, 0), + MX6_PAD_EIM_RW__WEIM_WEIM_RW = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, 0), + MX6_PAD_EIM_RW__IPU1_DI1_PIN8 = IOMUX_PAD(0x0418, 0x0104, 1, 0x0000, 0, 0), + MX6_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x0418, 0x0104, 2, 0x081C, 0, 0), + MX6_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27 = IOMUX_PAD(0x0418, 0x0104, 4, 0x0000, 0, 0), + MX6_PAD_EIM_RW__GPIO_2_26 = IOMUX_PAD(0x0418, 0x0104, 5, 0x0000, 0, 0), + MX6_PAD_EIM_RW__TPSMP_HDATA_10 = IOMUX_PAD(0x0418, 0x0104, 6, 0x0000, 0, 0), + MX6_PAD_EIM_RW__SRC_BT_CFG_29 = IOMUX_PAD(0x0418, 0x0104, 7, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__WEIM_WEIM_LBA = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__IPU1_DI1_PIN17 = IOMUX_PAD(0x041C, 0x0108, 1, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x041C, 0x0108, 2, 0x0820, 0, 0), + MX6_PAD_EIM_LBA__GPIO_2_27 = IOMUX_PAD(0x041C, 0x0108, 5, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__TPSMP_HDATA_11 = IOMUX_PAD(0x041C, 0x0108, 6, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__SRC_BT_CFG_26 = IOMUX_PAD(0x041C, 0x0108, 7, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__WEIM_WEIM_EB_0 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__IPU1_DISP1_DAT_11 = IOMUX_PAD(0x0420, 0x010C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__IPU2_CSI1_D_11 = IOMUX_PAD(0x0420, 0x010C, 2, 0x08B4, 1, 0), + MX6_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0 = IOMUX_PAD(0x0420, 0x010C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__CCM_PMIC_RDY = IOMUX_PAD(0x0420, 0x010C, 4, 0x07F0, 0, 0), + MX6_PAD_EIM_EB0__GPIO_2_28 = IOMUX_PAD(0x0420, 0x010C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__TPSMP_HDATA_12 = IOMUX_PAD(0x0420, 0x010C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__SRC_BT_CFG_27 = IOMUX_PAD(0x0420, 0x010C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__WEIM_WEIM_EB_1 = IOMUX_PAD(0x0424, 0x0110, 0, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__IPU1_DISP1_DAT_10 = IOMUX_PAD(0x0424, 0x0110, 1, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__IPU2_CSI1_D_10 = IOMUX_PAD(0x0424, 0x0110, 2, 0x08B0, 1, 0), + MX6_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1 = IOMUX_PAD(0x0424, 0x0110, 3, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__GPIO_2_29 = IOMUX_PAD(0x0424, 0x0110, 5, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__TPSMP_HDATA_13 = IOMUX_PAD(0x0424, 0x0110, 6, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__SRC_BT_CFG_28 = IOMUX_PAD(0x0424, 0x0110, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 = IOMUX_PAD(0x0428, 0x0114, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__IPU1_DISP1_DAT_9 = IOMUX_PAD(0x0428, 0x0114, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__IPU2_CSI1_D_9 = IOMUX_PAD(0x0428, 0x0114, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2 = IOMUX_PAD(0x0428, 0x0114, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__GPIO_3_0 = IOMUX_PAD(0x0428, 0x0114, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__TPSMP_HDATA_14 = IOMUX_PAD(0x0428, 0x0114, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__SRC_BT_CFG_0 = IOMUX_PAD(0x0428, 0x0114, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 = IOMUX_PAD(0x042C, 0x0118, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__IPU1_DISP1_DAT_8 = IOMUX_PAD(0x042C, 0x0118, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__IPU2_CSI1_D_8 = IOMUX_PAD(0x042C, 0x0118, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3 = IOMUX_PAD(0x042C, 0x0118, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__USBPHY1_TX_LS_MODE = IOMUX_PAD(0x042C, 0x0118, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__GPIO_3_1 = IOMUX_PAD(0x042C, 0x0118, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__TPSMP_HDATA_15 = IOMUX_PAD(0x042C, 0x0118, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__SRC_BT_CFG_1 = IOMUX_PAD(0x042C, 0x0118, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 = IOMUX_PAD(0x0430, 0x011C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__IPU1_DISP1_DAT_7 = IOMUX_PAD(0x0430, 0x011C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__IPU2_CSI1_D_7 = IOMUX_PAD(0x0430, 0x011C, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4 = IOMUX_PAD(0x0430, 0x011C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__USBPHY1_TX_HS_MODE = IOMUX_PAD(0x0430, 0x011C, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__GPIO_3_2 = IOMUX_PAD(0x0430, 0x011C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__TPSMP_HDATA_16 = IOMUX_PAD(0x0430, 0x011C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__SRC_BT_CFG_2 = IOMUX_PAD(0x0430, 0x011C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 = IOMUX_PAD(0x0434, 0x0120, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__IPU1_DISP1_DAT_6 = IOMUX_PAD(0x0434, 0x0120, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__IPU2_CSI1_D_6 = IOMUX_PAD(0x0434, 0x0120, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5 = IOMUX_PAD(0x0434, 0x0120, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__USBPHY1_TX_HIZ = IOMUX_PAD(0x0434, 0x0120, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__GPIO_3_3 = IOMUX_PAD(0x0434, 0x0120, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__TPSMP_HDATA_17 = IOMUX_PAD(0x0434, 0x0120, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__SRC_BT_CFG_3 = IOMUX_PAD(0x0434, 0x0120, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 = IOMUX_PAD(0x0438, 0x0124, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__IPU1_DISP1_DAT_5 = IOMUX_PAD(0x0438, 0x0124, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__IPU2_CSI1_D_5 = IOMUX_PAD(0x0438, 0x0124, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6 = IOMUX_PAD(0x0438, 0x0124, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN = IOMUX_PAD(0x0438, 0x0124, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__GPIO_3_4 = IOMUX_PAD(0x0438, 0x0124, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__TPSMP_HDATA_18 = IOMUX_PAD(0x0438, 0x0124, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__SRC_BT_CFG_4 = IOMUX_PAD(0x0438, 0x0124, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 = IOMUX_PAD(0x043C, 0x0128, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__IPU1_DISP1_DAT_4 = IOMUX_PAD(0x043C, 0x0128, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__IPU2_CSI1_D_4 = IOMUX_PAD(0x043C, 0x0128, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7 = IOMUX_PAD(0x043C, 0x0128, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP = IOMUX_PAD(0x043C, 0x0128, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__GPIO_3_5 = IOMUX_PAD(0x043C, 0x0128, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__TPSMP_HDATA_19 = IOMUX_PAD(0x043C, 0x0128, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__SRC_BT_CFG_5 = IOMUX_PAD(0x043C, 0x0128, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 = IOMUX_PAD(0x0440, 0x012C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__IPU1_DISP1_DAT_3 = IOMUX_PAD(0x0440, 0x012C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__IPU2_CSI1_D_3 = IOMUX_PAD(0x0440, 0x012C, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8 = IOMUX_PAD(0x0440, 0x012C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN = IOMUX_PAD(0x0440, 0x012C, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__GPIO_3_6 = IOMUX_PAD(0x0440, 0x012C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__TPSMP_HDATA_20 = IOMUX_PAD(0x0440, 0x012C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__SRC_BT_CFG_6 = IOMUX_PAD(0x0440, 0x012C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 = IOMUX_PAD(0x0444, 0x0130, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__IPU1_DISP1_DAT_2 = IOMUX_PAD(0x0444, 0x0130, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__IPU2_CSI1_D_2 = IOMUX_PAD(0x0444, 0x0130, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9 = IOMUX_PAD(0x0444, 0x0130, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__GPIO_3_7 = IOMUX_PAD(0x0444, 0x0130, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__TPSMP_HDATA_21 = IOMUX_PAD(0x0444, 0x0130, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__SRC_BT_CFG_7 = IOMUX_PAD(0x0444, 0x0130, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 = IOMUX_PAD(0x0448, 0x0134, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__IPU1_DISP1_DAT_1 = IOMUX_PAD(0x0448, 0x0134, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__IPU2_CSI1_D_1 = IOMUX_PAD(0x0448, 0x0134, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10 = IOMUX_PAD(0x0448, 0x0134, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__GPIO_3_8 = IOMUX_PAD(0x0448, 0x0134, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__TPSMP_HDATA_22 = IOMUX_PAD(0x0448, 0x0134, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__SRC_BT_CFG_8 = IOMUX_PAD(0x0448, 0x0134, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 = IOMUX_PAD(0x044C, 0x0138, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__IPU1_DISP1_DAT_0 = IOMUX_PAD(0x044C, 0x0138, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__IPU2_CSI1_D_0 = IOMUX_PAD(0x044C, 0x0138, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11 = IOMUX_PAD(0x044C, 0x0138, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x044C, 0x0138, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__TPSMP_HDATA_23 = IOMUX_PAD(0x044C, 0x0138, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__SRC_BT_CFG_9 = IOMUX_PAD(0x044C, 0x0138, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 = IOMUX_PAD(0x0450, 0x013C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__IPU1_DI1_PIN15 = IOMUX_PAD(0x0450, 0x013C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x0450, 0x013C, 2, 0x08D8, 1, 0), + MX6_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12 = IOMUX_PAD(0x0450, 0x013C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__GPIO_3_10 = IOMUX_PAD(0x0450, 0x013C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__TPSMP_HDATA_24 = IOMUX_PAD(0x0450, 0x013C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__SRC_BT_CFG_10 = IOMUX_PAD(0x0450, 0x013C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 = IOMUX_PAD(0x0454, 0x0140, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__IPU1_DI1_PIN2 = IOMUX_PAD(0x0454, 0x0140, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__IPU2_CSI1_HSYNC = IOMUX_PAD(0x0454, 0x0140, 2, 0x08DC, 1, 0), + MX6_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13 = IOMUX_PAD(0x0454, 0x0140, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6 = IOMUX_PAD(0x0454, 0x0140, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__GPIO_3_11 = IOMUX_PAD(0x0454, 0x0140, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__TPSMP_HDATA_25 = IOMUX_PAD(0x0454, 0x0140, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__SRC_BT_CFG_11 = IOMUX_PAD(0x0454, 0x0140, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 = IOMUX_PAD(0x0458, 0x0144, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__IPU1_DI1_PIN3 = IOMUX_PAD(0x0458, 0x0144, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__IPU2_CSI1_VSYNC = IOMUX_PAD(0x0458, 0x0144, 2, 0x08E4, 1, 0), + MX6_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14 = IOMUX_PAD(0x0458, 0x0144, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3 = IOMUX_PAD(0x0458, 0x0144, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__GPIO_3_12 = IOMUX_PAD(0x0458, 0x0144, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__TPSMP_HDATA_26 = IOMUX_PAD(0x0458, 0x0144, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__SRC_BT_CFG_12 = IOMUX_PAD(0x0458, 0x0144, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 = IOMUX_PAD(0x045C, 0x0148, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__IPU1_DI1_D0_CS = IOMUX_PAD(0x045C, 0x0148, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x045C, 0x0148, 2, 0x07EC, 1, 0), + MX6_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15 = IOMUX_PAD(0x045C, 0x0148, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4 = IOMUX_PAD(0x045C, 0x0148, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__GPIO_3_13 = IOMUX_PAD(0x045C, 0x0148, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__TPSMP_HDATA_27 = IOMUX_PAD(0x045C, 0x0148, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__SRC_BT_CFG_13 = IOMUX_PAD(0x045C, 0x0148, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 = IOMUX_PAD(0x0460, 0x014C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__IPU1_DI1_D1_CS = IOMUX_PAD(0x0460, 0x014C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x0460, 0x014C, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16 = IOMUX_PAD(0x0460, 0x014C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5 = IOMUX_PAD(0x0460, 0x014C, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__GPIO_3_14 = IOMUX_PAD(0x0460, 0x014C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__TPSMP_HDATA_28 = IOMUX_PAD(0x0460, 0x014C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__SRC_BT_CFG_14 = IOMUX_PAD(0x0460, 0x014C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 = IOMUX_PAD(0x0464, 0x0150, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__IPU1_DI1_PIN1 = IOMUX_PAD(0x0464, 0x0150, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__IPU1_DI1_PIN4 = IOMUX_PAD(0x0464, 0x0150, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17 = IOMUX_PAD(0x0464, 0x0150, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__GPIO_3_15 = IOMUX_PAD(0x0464, 0x0150, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__TPSMP_HDATA_29 = IOMUX_PAD(0x0464, 0x0150, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__SRC_BT_CFG_15 = IOMUX_PAD(0x0464, 0x0150, 7, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__WEIM_WEIM_WAIT = IOMUX_PAD(0x0468, 0x0154, 0, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B = IOMUX_PAD(0x0468, 0x0154, 1, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__GPIO_5_0 = IOMUX_PAD(0x0468, 0x0154, 5, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__TPSMP_HDATA_30 = IOMUX_PAD(0x0468, 0x0154, 6, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__SRC_BT_CFG_25 = IOMUX_PAD(0x0468, 0x0154, 7, 0x0000, 0, 0), + MX6_PAD_EIM_BCLK__WEIM_WEIM_BCLK = IOMUX_PAD(0x046C, 0x0158, 0, 0x0000, 0, 0), + MX6_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0), + MX6_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0), + MX6_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2 = IOMUX_PAD(0x0478, 0x0164, 4, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3 = IOMUX_PAD(0x047C, 0x0168, 4, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__GPIO_4_19 = IOMUX_PAD(0x047C, 0x0168, 5, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 = IOMUX_PAD(0x047C, 0x0168, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__PL301_PER1_HADDR_10 = IOMUX_PAD(0x047C, 0x0168, 7, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 0, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__IPU2_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 1, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0), + MX6_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL = IOMUX_PAD(0x0488, 0x0174, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x048C, 0x0178, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR = IOMUX_PAD(0x0490, 0x017C, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x0494, 0x0180, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS = IOMUX_PAD(0x0498, 0x0184, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT = IOMUX_PAD(0x049C, 0x0188, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0 = IOMUX_PAD(0x04A0, 0x018C, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1 = IOMUX_PAD(0x04A4, 0x0190, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2 = IOMUX_PAD(0x04A8, 0x0194, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0), + MX6_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0), + MX6_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0), + MX6_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0), + MX6_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2 = IOMUX_PAD(0x04C0, 0x01AC, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0), + MX6_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0), + MX6_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x04C4, 0x01B0, 4, 0x090C, 0, 0), + MX6_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0), + MX6_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0), + MX6_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x04C8, 0x01B4, 4, 0x0910, 0, 0), + MX6_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0), + MX6_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0), + MX6_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x04CC, 0x01B8, 4, 0x07C0, 0, 0), + MX6_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0), + MX6_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0), + MX6_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x04D0, 0x01BC, 4, 0x07BC, 0, 0), + MX6_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0), + MX6_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0), + MX6_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7 = IOMUX_PAD(0x04D4, 0x01C0, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0), + MX6_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0), + MX6_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0 = IOMUX_PAD(0x04D8, 0x01C4, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0), + MX6_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0), + MX6_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1 = IOMUX_PAD(0x04DC, 0x01C8, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0), + MX6_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0), + MX6_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2 = IOMUX_PAD(0x04E0, 0x01CC, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__GPIO_5_17 = IOMUX_PAD(0x04E0, 0x01CC, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__MMDC_DEBUG_28 = IOMUX_PAD(0x04E0, 0x01CC, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__PL301_PER1_HADR31 = IOMUX_PAD(0x04E0, 0x01CC, 7, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__RESERVED_RESERVED = IOMUX_PAD(0x04E4, 0x01D0, 0, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x04E4, 0x01D0, 1, 0x0840, 0, 0), + MX6_PAD_ENET_MDIO__ESAI1_SCKR = IOMUX_PAD(0x04E4, 0x01D0, 2, 0x086C, 0, 0), + MX6_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3 = IOMUX_PAD(0x04E4, 0x01D0, 3, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__ENET_1588_EVT1_OUT = IOMUX_PAD(0x04E4, 0x01D0, 4, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__GPIO_1_22 = IOMUX_PAD(0x04E4, 0x01D0, 5, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__SPDIF_PLOCK = IOMUX_PAD(0x04E4, 0x01D0, 6, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__RESERVED_RSRVED = IOMUX_PAD(0x04E8, 0x01D4, 0, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x04E8, 0x01D4, 1, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x04E8, 0x01D4, 2, 0x085C, 0, 0), + MX6_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4 = IOMUX_PAD(0x04E8, 0x01D4, 3, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__GPIO_1_23 = IOMUX_PAD(0x04E8, 0x01D4, 5, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__SPDIF_SRCLK = IOMUX_PAD(0x04E8, 0x01D4, 6, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__USBPHY1_RX_SQH = IOMUX_PAD(0x04E8, 0x01D4, 7, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__ENET_RX_ER = IOMUX_PAD(0x04EC, 0x01D8, 1, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x04EC, 0x01D8, 2, 0x0864, 0, 0), + MX6_PAD_ENET_RX_ER__SPDIF_IN1 = IOMUX_PAD(0x04EC, 0x01D8, 3, 0x0914, 1, 0), + MX6_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT = IOMUX_PAD(0x04EC, 0x01D8, 4, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__GPIO_1_24 = IOMUX_PAD(0x04EC, 0x01D8, 5, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__PHY_TDI = IOMUX_PAD(0x04EC, 0x01D8, 6, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD = IOMUX_PAD(0x04EC, 0x01D8, 7, 0x0000, 0, 0), + MX6_PAD_ENET_CRS_DV__RESERVED_RSRVED = IOMUX_PAD(0x04F0, 0x01DC, 0, 0x0000, 0, 0), + MX6_PAD_ENET_CRS_DV__ENET_RX_EN = IOMUX_PAD(0x04F0, 0x01DC, 1, 0x0858, 1, 0), + MX6_PAD_ENET_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x04F0, 0x01DC, 2, 0x0870, 0, 0), + MX6_PAD_ENET_CRS_DV__SPDIF_EXTCLK = IOMUX_PAD(0x04F0, 0x01DC, 3, 0x0918, 1, 0), + MX6_PAD_ENET_CRS_DV__GPIO_1_25 = IOMUX_PAD(0x04F0, 0x01DC, 5, 0x0000, 0, 0), + MX6_PAD_ENET_CRS_DV__PHY_TDO = IOMUX_PAD(0x04F0, 0x01DC, 6, 0x0000, 0, 0), + MX6_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD = IOMUX_PAD(0x04F0, 0x01DC, 7, 0x0000, 0, 0), + MX6_PAD_ENET_RXD1__MLB_MLBSIG = IOMUX_PAD(0x04F4, 0x01E0, 0, 0x0908, 0, 0), + MX6_PAD_ENET_RXD1__ENET_RDATA_1 = IOMUX_PAD(0x04F4, 0x01E0, 1, 0x084C, 1, 0), + MX6_PAD_ENET_RXD1__ESAI1_FST = IOMUX_PAD(0x04F4, 0x01E0, 2, 0x0860, 0, 0), + MX6_PAD_ENET_RXD1__ENET_1588_EVT3_OUT = IOMUX_PAD(0x04F4, 0x01E0, 4, 0x0000, 0, 0), + MX6_PAD_ENET_RXD1__GPIO_1_26 = IOMUX_PAD(0x04F4, 0x01E0, 5, 0x0000, 0, 0), + MX6_PAD_ENET_RXD1__PHY_TCK = IOMUX_PAD(0x04F4, 0x01E0, 6, 0x0000, 0, 0), + MX6_PAD_ENET_RXD1__USBPHY1_RX_DISCON = IOMUX_PAD(0x04F4, 0x01E0, 7, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__OSC32K_32K_OUT = IOMUX_PAD(0x04F8, 0x01E4, 0, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__ENET_RDATA_0 = IOMUX_PAD(0x04F8, 0x01E4, 1, 0x0848, 1, 0), + MX6_PAD_ENET_RXD0__ESAI1_HCKT = IOMUX_PAD(0x04F8, 0x01E4, 2, 0x0868, 0, 0), + MX6_PAD_ENET_RXD0__SPDIF_OUT1 = IOMUX_PAD(0x04F8, 0x01E4, 3, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x04F8, 0x01E4, 5, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__PHY_TMS = IOMUX_PAD(0x04F8, 0x01E4, 6, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV = IOMUX_PAD(0x04F8, 0x01E4, 7, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__RESERVED_RSRVED = IOMUX_PAD(0x04FC, 0x01E8, 0, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__ENET_TX_EN = IOMUX_PAD(0x04FC, 0x01E8, 1, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x04FC, 0x01E8, 2, 0x0880, 0, 0), + MX6_PAD_ENET_TX_EN__GPIO_1_28 = IOMUX_PAD(0x04FC, 0x01E8, 5, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__SATA_PHY_TDI = IOMUX_PAD(0x04FC, 0x01E8, 6, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__USBPHY2_RX_SQH = IOMUX_PAD(0x04FC, 0x01E8, 7, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__MLB_MLBCLK = IOMUX_PAD(0x0500, 0x01EC, 0, 0x0900, 0, 0), + MX6_PAD_ENET_TXD1__ENET_TDATA_1 = IOMUX_PAD(0x0500, 0x01EC, 1, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x0500, 0x01EC, 2, 0x087C, 0, 0), + MX6_PAD_ENET_TXD1__ENET_1588_EVENT0_IN = IOMUX_PAD(0x0500, 0x01EC, 4, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__GPIO_1_29 = IOMUX_PAD(0x0500, 0x01EC, 5, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__SATA_PHY_TDO = IOMUX_PAD(0x0500, 0x01EC, 6, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD = IOMUX_PAD(0x0500, 0x01EC, 7, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__RESERVED_RSRVED = IOMUX_PAD(0x0504, 0x01F0, 0, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__ENET_TDATA_0 = IOMUX_PAD(0x0504, 0x01F0, 1, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x0504, 0x01F0, 2, 0x0884, 0, 0), + MX6_PAD_ENET_TXD0__GPIO_1_30 = IOMUX_PAD(0x0504, 0x01F0, 5, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__SATA_PHY_TCK = IOMUX_PAD(0x0504, 0x01F0, 6, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD = IOMUX_PAD(0x0504, 0x01F0, 7, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__MLB_MLBDAT = IOMUX_PAD(0x0508, 0x01F4, 0, 0x0904, 0, 0), + MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x0508, 0x01F4, 1, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x0508, 0x01F4, 2, 0x0888, 0, 0), + MX6_PAD_ENET_MDC__ENET_1588_EVENT1_IN = IOMUX_PAD(0x0508, 0x01F4, 4, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__GPIO_1_31 = IOMUX_PAD(0x0508, 0x01F4, 5, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__SATA_PHY_TMS = IOMUX_PAD(0x0508, 0x01F4, 6, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__USBPHY2_RX_DISCON = IOMUX_PAD(0x0508, 0x01F4, 7, 0x0000, 0, 0), + MX6_PAD_DRAM_D40__MMDC_DRAM_D_40 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D41__MMDC_DRAM_D_41 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D42__MMDC_DRAM_D_42 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D43__MMDC_DRAM_D_43 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D44__MMDC_DRAM_D_44 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D45__MMDC_DRAM_D_45 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D46__MMDC_DRAM_D_46 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D47__MMDC_DRAM_D_47 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 = IOMUX_PAD(0x050C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 = IOMUX_PAD(0x0510, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D32__MMDC_DRAM_D_32 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D33__MMDC_DRAM_D_33 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D34__MMDC_DRAM_D_34 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D35__MMDC_DRAM_D_35 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D36__MMDC_DRAM_D_36 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D37__MMDC_DRAM_D_37 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D38__MMDC_DRAM_D_38 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D39__MMDC_DRAM_D_39 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 = IOMUX_PAD(0x0514, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 = IOMUX_PAD(0x0518, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D24__MMDC_DRAM_D_24 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D25__MMDC_DRAM_D_25 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D26__MMDC_DRAM_D_26 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D27__MMDC_DRAM_D_27 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D28__MMDC_DRAM_D_28 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D29__MMDC_DRAM_D_29 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 = IOMUX_PAD(0x051C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D30__MMDC_DRAM_D_30 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D31__MMDC_DRAM_D_31 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 = IOMUX_PAD(0x0520, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D16__MMDC_DRAM_D_16 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D17__MMDC_DRAM_D_17 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D18__MMDC_DRAM_D_18 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D19__MMDC_DRAM_D_19 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D20__MMDC_DRAM_D_20 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D21__MMDC_DRAM_D_21 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D22__MMDC_DRAM_D_22 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 = IOMUX_PAD(0x0524, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D23__MMDC_DRAM_D_23 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 = IOMUX_PAD(0x0528, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A0__MMDC_DRAM_A_0 = IOMUX_PAD(0x052C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A1__MMDC_DRAM_A_1 = IOMUX_PAD(0x0530, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A2__MMDC_DRAM_A_2 = IOMUX_PAD(0x0534, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A3__MMDC_DRAM_A_3 = IOMUX_PAD(0x0538, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A4__MMDC_DRAM_A_4 = IOMUX_PAD(0x053C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A5__MMDC_DRAM_A_5 = IOMUX_PAD(0x0540, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A6__MMDC_DRAM_A_6 = IOMUX_PAD(0x0544, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A7__MMDC_DRAM_A_7 = IOMUX_PAD(0x0548, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A8__MMDC_DRAM_A_8 = IOMUX_PAD(0x054C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A9__MMDC_DRAM_A_9 = IOMUX_PAD(0x0550, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A10__MMDC_DRAM_A_10 = IOMUX_PAD(0x0554, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A11__MMDC_DRAM_A_11 = IOMUX_PAD(0x0558, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A12__MMDC_DRAM_A_12 = IOMUX_PAD(0x055C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A13__MMDC_DRAM_A_13 = IOMUX_PAD(0x0560, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A14__MMDC_DRAM_A_14 = IOMUX_PAD(0x0564, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A15__MMDC_DRAM_A_15 = IOMUX_PAD(0x0568, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_CAS__MMDC_DRAM_CAS = IOMUX_PAD(0x056C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_CS0__MMDC_DRAM_CS_0 = IOMUX_PAD(0x0570, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_CS1__MMDC_DRAM_CS_1 = IOMUX_PAD(0x0574, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_RAS__MMDC_DRAM_RAS = IOMUX_PAD(0x0578, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_RESET__MMDC_DRAM_RESET = IOMUX_PAD(0x057C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 = IOMUX_PAD(0x0580, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 = IOMUX_PAD(0x0584, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 = IOMUX_PAD(0x0588, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 = IOMUX_PAD(0x058C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 = IOMUX_PAD(0x0590, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 = IOMUX_PAD(0x0594, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 = IOMUX_PAD(0x0598, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 = IOMUX_PAD(0x059C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 = IOMUX_PAD(0x05A0, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDWE__MMDC_DRAM_SDWE = IOMUX_PAD(0x05A4, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D0__MMDC_DRAM_D_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D1__MMDC_DRAM_D_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D2__MMDC_DRAM_D_2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D3__MMDC_DRAM_D_3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D4__MMDC_DRAM_D_4 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D5__MMDC_DRAM_D_5 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 = IOMUX_PAD(0x05A8, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D6__MMDC_DRAM_D_6 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D7__MMDC_DRAM_D_7 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 = IOMUX_PAD(0x05AC, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D8__MMDC_DRAM_D_8 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D9__MMDC_DRAM_D_9 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D10__MMDC_DRAM_D_10 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D11__MMDC_DRAM_D_11 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D12__MMDC_DRAM_D_12 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D13__MMDC_DRAM_D_13 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D14__MMDC_DRAM_D_14 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 = IOMUX_PAD(0x05B0, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D15__MMDC_DRAM_D_15 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 = IOMUX_PAD(0x05B4, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D48__MMDC_DRAM_D_48 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D49__MMDC_DRAM_D_49 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D50__MMDC_DRAM_D_50 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D51__MMDC_DRAM_D_51 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D52__MMDC_DRAM_D_52 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D53__MMDC_DRAM_D_53 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D54__MMDC_DRAM_D_54 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D55__MMDC_DRAM_D_55 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 = IOMUX_PAD(0x05B8, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 = IOMUX_PAD(0x05BC, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D56__MMDC_DRAM_D_56 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 = IOMUX_PAD(0x05C0, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D57__MMDC_DRAM_D_57 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D58__MMDC_DRAM_D_58 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D59__MMDC_DRAM_D_59 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D60__MMDC_DRAM_D_60 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 = IOMUX_PAD(0x05C4, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D61__MMDC_DRAM_D_61 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D62__MMDC_DRAM_D_62 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D63__MMDC_DRAM_D_63 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x05C8, 0x01F8, 0, 0x07F4, 2, 0), + MX6_PAD_KEY_COL0__ENET_RDATA_3 = IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0854, 1, 0), + MX6_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x05C8, 0x01F8, 2, 0x07DC, 1, 0), + MX6_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x05C8, 0x01F8, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__UART4_TXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__UART4_TXD_RXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0938, 0, 0), + MX6_PAD_KEY_COL0__GPIO_4_6 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__DCIC1_DCIC_OUT = IOMUX_PAD(0x05C8, 0x01F8, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x05C8, 0x01F8, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x05CC, 0x01FC, 0, 0x07FC, 2, 0), + MX6_PAD_KEY_ROW0__ENET_TDATA_3 = IOMUX_PAD(0x05CC, 0x01FC, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x05CC, 0x01FC, 2, 0x07D0, 1, 0), + MX6_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x05CC, 0x01FC, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__UART4_RXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0938, 1, 0), + MX6_PAD_KEY_ROW0__GPIO_4_7 = IOMUX_PAD(0x05CC, 0x01FC, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__DCIC2_DCIC_OUT = IOMUX_PAD(0x05CC, 0x01FC, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__PL301_PER1_HADR_0 = IOMUX_PAD(0x05CC, 0x01FC, 7, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x05D0, 0x0200, 0, 0x07F8, 2, 0), + MX6_PAD_KEY_COL1__ENET_MDIO = IOMUX_PAD(0x05D0, 0x0200, 1, 0x0840, 1, 0), + MX6_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x05D0, 0x0200, 2, 0x07E0, 1, 0), + MX6_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x05D0, 0x0200, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__UART5_TXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__UART5_TXD_RXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0940, 0, 0), + MX6_PAD_KEY_COL1__GPIO_4_8 = IOMUX_PAD(0x05D0, 0x0200, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__USDHC1_VSELECT = IOMUX_PAD(0x05D0, 0x0200, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__PL301MX_PER1_HADR_1 = IOMUX_PAD(0x05D0, 0x0200, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x05D4, 0x0204, 0, 0x0800, 2, 0), + MX6_PAD_KEY_ROW1__ENET_COL = IOMUX_PAD(0x05D4, 0x0204, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x05D4, 0x0204, 2, 0x07CC, 1, 0), + MX6_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x05D4, 0x0204, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__UART5_RXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0940, 1, 0), + MX6_PAD_KEY_ROW1__GPIO_4_9 = IOMUX_PAD(0x05D4, 0x0204, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__USDHC2_VSELECT = IOMUX_PAD(0x05D4, 0x0204, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__PL301_PER1_HADDR_2 = IOMUX_PAD(0x05D4, 0x0204, 7, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x05D8, 0x0208, 0, 0x0804, 2, 0), + MX6_PAD_KEY_COL2__ENET_RDATA_2 = IOMUX_PAD(0x05D8, 0x0208, 1, 0x0850, 1, 0), + MX6_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x05D8, 0x0208, 2, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x05D8, 0x0208, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__ENET_MDC = IOMUX_PAD(0x05D8, 0x0208, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__GPIO_4_10 = IOMUX_PAD(0x05D8, 0x0208, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP = IOMUX_PAD(0x05D8, 0x0208, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__PL301_PER1_HADDR_3 = IOMUX_PAD(0x05D8, 0x0208, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x05DC, 0x020C, 0, 0x0808, 1, 0), + MX6_PAD_KEY_ROW2__ENET_TDATA_2 = IOMUX_PAD(0x05DC, 0x020C, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x05DC, 0x020C, 2, 0x07E4, 0, 0), + MX6_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x05DC, 0x020C, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__USDHC2_VSELECT = IOMUX_PAD(0x05DC, 0x020C, 4, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__GPIO_4_11 = IOMUX_PAD(0x05DC, 0x020C, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__HDMI_TX_CEC_LINE = IOMUX_PAD(0x05DC, 0x020C, 6, 0x088C, 1, 0), + MX6_PAD_KEY_ROW2__PL301_PER1_HADR_4 = IOMUX_PAD(0x05DC, 0x020C, 7, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x05E0, 0x0210, 0, 0x080C, 1, 0), + MX6_PAD_KEY_COL3__ENET_CRS = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__HDMI_TX_DDC_SCL = IOMUX_PAD(0x05E0, 0x0210, 2, 0x0890, 1, 0), + MX6_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x05E0, 0x0210, 20, 0x08A0, 1, 0), + MX6_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0914, 2, 0), + MX6_PAD_KEY_COL3__PL301_PER1_HADR_5 = IOMUX_PAD(0x05E0, 0x0210, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x05E4, 0x0214, 0, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05E4, 0x0214, 1, 0x07B0, 0, 0), + MX6_PAD_KEY_ROW3__HDMI_TX_DDC_SDA = IOMUX_PAD(0x05E4, 0x0214, 2, 0x0894, 1, 0), + MX6_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x05E4, 0x0214, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x05E4, 0x0214, 20, 0x08A4, 1, 0), + MX6_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__USDHC1_VSELECT = IOMUX_PAD(0x05E4, 0x0214, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__PL301_PER1_HADR_6 = IOMUX_PAD(0x05E4, 0x0214, 7, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x05E8, 0x0218, 0, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__IPU1_SISG_4 = IOMUX_PAD(0x05E8, 0x0218, 1, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x05E8, 0x0218, 2, 0x0944, 1, 0), + MX6_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x05E8, 0x0218, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__UART5_CTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x093C, 0, 0), + MX6_PAD_KEY_COL4__GPIO_4_14 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__MMDC_DEBUG_49 = IOMUX_PAD(0x05E8, 0x0218, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__PL301_PER1_HADDR_7 = IOMUX_PAD(0x05E8, 0x0218, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x05EC, 0x021C, 0, 0x07E8, 0, 0), + MX6_PAD_KEY_ROW4__IPU1_SISG_5 = IOMUX_PAD(0x05EC, 0x021C, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x05EC, 0x021C, 2, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x05EC, 0x021C, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x05EC, 0x021C, 4, 0x093C, 1, 0), + MX6_PAD_KEY_ROW4__GPIO_4_15 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__MMDC_DEBUG_50 = IOMUX_PAD(0x05EC, 0x021C, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__PL301_PER1_HADR_8 = IOMUX_PAD(0x05EC, 0x021C, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x05F0, 0x0220, 0, 0x0000, 0, 0), + MX6_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x05F0, 0x0220, 2, 0x08E8, 0, 0), + MX6_PAD_GPIO_0__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05F0, 0x0220, 3, 0x07B0, 1, 0), + MX6_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x05F0, 0x0220, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_0__GPIO_1_0 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x05F0, 0x0220, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5 = IOMUX_PAD(0x05F0, 0x0220, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0), + MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0), + MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x05F4, 0x0224, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x05F8, 0x0228, 0, 0x085C, 1, 0), + MX6_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x05F8, 0x0228, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x05F8, 0x0228, 2, 0x08EC, 0, 0), + MX6_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x05F8, 0x0228, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x05F8, 0x0228, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_9__GPIO_1_9 = IOMUX_PAD(0x05F8, 0x0228, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_9__USDHC1_WP = IOMUX_PAD(0x05F8, 0x0228, 6, 0x094C, 1, 0), + MX6_PAD_GPIO_9__SRC_EARLY_RST = IOMUX_PAD(0x05F8, 0x0228, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x05FC, 0x022C, 0, 0x0864, 1, 0), + MX6_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0 = IOMUX_PAD(0x05FC, 0x022C, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x05FC, 0x022C, 18, 0x08A8, 1, 0), + MX6_PAD_GPIO_3__ANATOP_24M_OUT = IOMUX_PAD(0x05FC, 0x022C, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x05FC, 0x022C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_3__GPIO_1_3 = IOMUX_PAD(0x05FC, 0x022C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x05FC, 0x022C, 6, 0x0948, 1, 0), + MX6_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x05FC, 0x022C, 7, 0x0900, 1, 0), + MX6_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x0600, 0x0230, 0, 0x0870, 1, 0), + MX6_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1 = IOMUX_PAD(0x0600, 0x0230, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x0600, 0x0230, 18, 0x08AC, 1, 0), + MX6_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x0600, 0x0230, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x0600, 0x0230, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_6__GPIO_1_6 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_6__USDHC2_LCTL = IOMUX_PAD(0x0600, 0x0230, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x0600, 0x0230, 7, 0x0908, 1, 0), + MX6_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x0604, 0x0234, 0, 0x0860, 1, 0), + MX6_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2 = IOMUX_PAD(0x0604, 0x0234, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x0604, 0x0234, 2, 0x08F8, 1, 0), + MX6_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x0604, 0x0234, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x0604, 0x0234, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x0604, 0x0234, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_2__USDHC2_WP = IOMUX_PAD(0x0604, 0x0234, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x0604, 0x0234, 7, 0x0904, 1, 0), + MX6_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x0608, 0x0238, 0, 0x0868, 1, 0), + MX6_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3 = IOMUX_PAD(0x0608, 0x0238, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x0608, 0x0238, 2, 0x08F0, 1, 0), + MX6_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x0608, 0x0238, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x0608, 0x0238, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_4__GPIO_1_4 = IOMUX_PAD(0x0608, 0x0238, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_4__USDHC2_CD = IOMUX_PAD(0x0608, 0x0238, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x060C, 0x023C, 0, 0x087C, 1, 0), + MX6_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4 = IOMUX_PAD(0x060C, 0x023C, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x060C, 0x023C, 2, 0x08FC, 1, 0), + MX6_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x060C, 0x023C, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x060C, 0x023C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x060C, 0x023C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x060C, 0x023C, 22, 0x08A8, 2, 0), + MX6_PAD_GPIO_5__CHEETAH_EVENTI = IOMUX_PAD(0x060C, 0x023C, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x0610, 0x0240, 0, 0x0884, 1, 0), + MX6_PAD_GPIO_7__ECSPI5_RDY = IOMUX_PAD(0x0610, 0x0240, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x0610, 0x0240, 2, 0x0000, 0, 0), + MX6_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x0610, 0x0240, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_7__UART2_TXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_7__UART2_TXD_RXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0928, 2, 0), + MX6_PAD_GPIO_7__GPIO_1_7 = IOMUX_PAD(0x0610, 0x0240, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x0610, 0x0240, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE = IOMUX_PAD(0x0610, 0x0240, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x0614, 0x0244, 0, 0x0888, 1, 0), + MX6_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT = IOMUX_PAD(0x0614, 0x0244, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x0614, 0x0244, 2, 0x0000, 0, 0), + MX6_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x0614, 0x0244, 3, 0x07E4, 1, 0), + MX6_PAD_GPIO_8__UART2_RXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0928, 3, 0), + MX6_PAD_GPIO_8__GPIO_1_8 = IOMUX_PAD(0x0614, 0x0244, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x0614, 0x0244, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK = IOMUX_PAD(0x0614, 0x0244, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x0618, 0x0248, 0, 0x0880, 1, 0), + MX6_PAD_GPIO_16__ENET_1588_EVENT2_IN = IOMUX_PAD(0x0618, 0x0248, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_16__ENET_ETHERNET_REF_OUT = IOMUX_PAD(0x0618, 0x0248, 2, 0x083C, 1, 0), + MX6_PAD_GPIO_16__USDHC1_LCTL = IOMUX_PAD(0x0618, 0x0248, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x0618, 0x0248, 4, 0x0914, 3, 0), + MX6_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x0618, 0x0248, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x0618, 0x0248, 22, 0x08AC, 2, 0), + MX6_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x0618, 0x0248, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x061C, 0x024C, 0, 0x0874, 0, 0), + MX6_PAD_GPIO_17__ENET_1588_EVENT3_IN = IOMUX_PAD(0x061C, 0x024C, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_17__CCM_PMIC_RDY = IOMUX_PAD(0x061C, 0x024C, 2, 0x07F0, 1, 0), + MX6_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 = IOMUX_PAD(0x061C, 0x024C, 3, 0x090C, 1, 0), + MX6_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x061C, 0x024C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x061C, 0x024C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x061C, 0x024C, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x0620, 0x0250, 0, 0x0878, 0, 0), + MX6_PAD_GPIO_18__ENET_RX_CLK = IOMUX_PAD(0x0620, 0x0250, 1, 0x0844, 1, 0), + MX6_PAD_GPIO_18__USDHC3_VSELECT = IOMUX_PAD(0x0620, 0x0250, 2, 0x0000, 0, 0), + MX6_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 = IOMUX_PAD(0x0620, 0x0250, 3, 0x0910, 1, 0), + MX6_PAD_GPIO_18__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x0620, 0x0250, 4, 0x07B0, 2, 0), + MX6_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x0620, 0x0250, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5 = IOMUX_PAD(0x0620, 0x0250, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x0620, 0x0250, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x0624, 0x0254, 0, 0x08E8, 1, 0), + MX6_PAD_GPIO_19__ENET_1588_EVENT0_OUT = IOMUX_PAD(0x0624, 0x0254, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x0624, 0x0254, 2, 0x0000, 0, 0), + MX6_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x0624, 0x0254, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x0624, 0x0254, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x0624, 0x0254, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_19__ENET_TX_ER = IOMUX_PAD(0x0624, 0x0254, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x0624, 0x0254, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK = IOMUX_PAD(0x0628, 0x0258, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12 = IOMUX_PAD(0x0628, 0x0258, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x0628, 0x0258, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__GPIO_5_18 = IOMUX_PAD(0x0628, 0x0258, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK___MMDC_DEBUG_29 = IOMUX_PAD(0x0628, 0x0258, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__CHEETAH_EVENTO = IOMUX_PAD(0x0628, 0x0258, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC = IOMUX_PAD(0x062C, 0x025C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13 = IOMUX_PAD(0x062C, 0x025C, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__CCM_CLKO = IOMUX_PAD(0x062C, 0x025C, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x062C, 0x025C, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__GPIO_5_19 = IOMUX_PAD(0x062C, 0x025C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 = IOMUX_PAD(0x062C, 0x025C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__CHEETAH_TRCTL = IOMUX_PAD(0x062C, 0x025C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN = IOMUX_PAD(0x0630, 0x0260, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 = IOMUX_PAD(0x0630, 0x0260, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14 = IOMUX_PAD(0x0630, 0x0260, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x0630, 0x0260, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__GPIO_5_20 = IOMUX_PAD(0x0630, 0x0260, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__MMDC_DEBUG_31 = IOMUX_PAD(0x0630, 0x0260, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__CHEETAH_TRCLK = IOMUX_PAD(0x0630, 0x0260, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC = IOMUX_PAD(0x0634, 0x0264, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 = IOMUX_PAD(0x0634, 0x0264, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15 = IOMUX_PAD(0x0634, 0x0264, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x0634, 0x0264, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__GPIO_5_21 = IOMUX_PAD(0x0634, 0x0264, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__MMDC_DEBUG_32 = IOMUX_PAD(0x0634, 0x0264, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__CHEETAH_TRACE_0 = IOMUX_PAD(0x0634, 0x0264, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__IPU1_CSI0_D_4 = IOMUX_PAD(0x0638, 0x0268, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__WEIM_WEIM_D_2 = IOMUX_PAD(0x0638, 0x0268, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x0638, 0x0268, 2, 0x07F4, 3, 0), + MX6_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x0638, 0x0268, 3, 0x08E8, 2, 0), + MX6_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x0638, 0x0268, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__GPIO_5_22 = IOMUX_PAD(0x0638, 0x0268, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__MMDC_DEBUG_43 = IOMUX_PAD(0x0638, 0x0268, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__CHEETAH_TRACE_1 = IOMUX_PAD(0x0638, 0x0268, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__IPU1_CSI0_D_5 = IOMUX_PAD(0x063C, 0x026C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__WEIM_WEIM_D_3 = IOMUX_PAD(0x063C, 0x026C, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x063C, 0x026C, 2, 0x07FC, 3, 0), + MX6_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x063C, 0x026C, 3, 0x08F4, 1, 0), + MX6_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x063C, 0x026C, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__GPIO_5_23 = IOMUX_PAD(0x063C, 0x026C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 = IOMUX_PAD(0x063C, 0x026C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__CHEETAH_TRACE_2 = IOMUX_PAD(0x063C, 0x026C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__IPU1_CSI0_D_6 = IOMUX_PAD(0x0640, 0x0270, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__WEIM_WEIM_D_4 = IOMUX_PAD(0x0640, 0x0270, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x0640, 0x0270, 2, 0x07F8, 3, 0), + MX6_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x0640, 0x0270, 3, 0x08EC, 1, 0), + MX6_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x0640, 0x0270, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__GPIO_5_24 = IOMUX_PAD(0x0640, 0x0270, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 = IOMUX_PAD(0x0640, 0x0270, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__CHEETAH_TRACE_3 = IOMUX_PAD(0x0640, 0x0270, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__IPU1_CSI0_D_7 = IOMUX_PAD(0x0644, 0x0274, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__WEIM_WEIM_D_5 = IOMUX_PAD(0x0644, 0x0274, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x0644, 0x0274, 2, 0x0800, 3, 0), + MX6_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x0644, 0x0274, 3, 0x08F8, 2, 0), + MX6_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x0644, 0x0274, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__GPIO_5_25 = IOMUX_PAD(0x0644, 0x0274, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 = IOMUX_PAD(0x0644, 0x0274, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__CHEETAH_TRACE_4 = IOMUX_PAD(0x0644, 0x0274, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__IPU1_CSI0_D_8 = IOMUX_PAD(0x0648, 0x0278, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__WEIM_WEIM_D_6 = IOMUX_PAD(0x0648, 0x0278, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x0648, 0x0278, 2, 0x0810, 2, 0), + MX6_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x0648, 0x0278, 3, 0x08F0, 2, 0), + MX6_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x0648, 0x0278, 20, 0x089C, 1, 0), + MX6_PAD_CSI0_DAT8__GPIO_5_26 = IOMUX_PAD(0x0648, 0x0278, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 = IOMUX_PAD(0x0648, 0x0278, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__CHEETAH_TRACE_5 = IOMUX_PAD(0x0648, 0x0278, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__IPU1_CSI0_D_9 = IOMUX_PAD(0x064C, 0x027C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__WEIM_WEIM_D_7 = IOMUX_PAD(0x064C, 0x027C, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x064C, 0x027C, 2, 0x0818, 2, 0), + MX6_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x064C, 0x027C, 3, 0x08FC, 2, 0), + MX6_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x064C, 0x027C, 20, 0x0898, 1, 0), + MX6_PAD_CSI0_DAT9__GPIO_5_27 = IOMUX_PAD(0x064C, 0x027C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 = IOMUX_PAD(0x064C, 0x027C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__CHEETAH_TRACE_6 = IOMUX_PAD(0x064C, 0x027C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__IPU1_CSI0_D_10 = IOMUX_PAD(0x0650, 0x0280, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0650, 0x0280, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x0650, 0x0280, 2, 0x0814, 2, 0), + MX6_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__UART1_TXD_RXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0920, 0, 0), + MX6_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x0650, 0x0280, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__GPIO_5_28 = IOMUX_PAD(0x0650, 0x0280, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 = IOMUX_PAD(0x0650, 0x0280, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__CHEETAH_TRACE_7 = IOMUX_PAD(0x0650, 0x0280, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__IPU1_CSI0_D_11 = IOMUX_PAD(0x0654, 0x0284, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x0654, 0x0284, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x0654, 0x0284, 2, 0x081C, 2, 0), + MX6_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0920, 1, 0), + MX6_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x0654, 0x0284, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__GPIO_5_29 = IOMUX_PAD(0x0654, 0x0284, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 = IOMUX_PAD(0x0654, 0x0284, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__CHEETAH_TRACE_8 = IOMUX_PAD(0x0654, 0x0284, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__IPU1_CSI0_D_12 = IOMUX_PAD(0x0658, 0x0288, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__WEIM_WEIM_D_8 = IOMUX_PAD(0x0658, 0x0288, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 = IOMUX_PAD(0x0658, 0x0288, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__UART4_TXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__UART4_TXD_RXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0938, 2, 0), + MX6_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x0658, 0x0288, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__GPIO_5_30 = IOMUX_PAD(0x0658, 0x0288, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 = IOMUX_PAD(0x0658, 0x0288, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__CHEETAH_TRACE_9 = IOMUX_PAD(0x0658, 0x0288, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__IPU1_CSI0_D_13 = IOMUX_PAD(0x065C, 0x028C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__WEIM_WEIM_D_9 = IOMUX_PAD(0x065C, 0x028C, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 = IOMUX_PAD(0x065C, 0x028C, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__UART4_RXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0938, 3, 0), + MX6_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x065C, 0x028C, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__GPIO_5_31 = IOMUX_PAD(0x065C, 0x028C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 = IOMUX_PAD(0x065C, 0x028C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__CHEETAH_TRACE_10 = IOMUX_PAD(0x065C, 0x028C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__IPU1_CSI0_D_14 = IOMUX_PAD(0x0660, 0x0290, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__WEIM_WEIM_D_10 = IOMUX_PAD(0x0660, 0x0290, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 = IOMUX_PAD(0x0660, 0x0290, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__UART5_TXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__UART5_TXD_RXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0940, 2, 0), + MX6_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0660, 0x0290, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__GPIO_6_0 = IOMUX_PAD(0x0660, 0x0290, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 = IOMUX_PAD(0x0660, 0x0290, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__CHEETAH_TRACE_11 = IOMUX_PAD(0x0660, 0x0290, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__IPU1_CSI0_D_15 = IOMUX_PAD(0x0664, 0x0294, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__WEIM_WEIM_D_11 = IOMUX_PAD(0x0664, 0x0294, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 = IOMUX_PAD(0x0664, 0x0294, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__UART5_RXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0940, 3, 0), + MX6_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x0664, 0x0294, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__GPIO_6_1 = IOMUX_PAD(0x0664, 0x0294, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 = IOMUX_PAD(0x0664, 0x0294, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__CHEETAH_TRACE_12 = IOMUX_PAD(0x0664, 0x0294, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__IPU1_CSI0_D_16 = IOMUX_PAD(0x0668, 0x0298, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__WEIM_WEIM_D_12 = IOMUX_PAD(0x0668, 0x0298, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20 = IOMUX_PAD(0x0668, 0x0298, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__UART4_CTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0934, 0, 0), + MX6_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x0668, 0x0298, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__GPIO_6_2 = IOMUX_PAD(0x0668, 0x0298, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 = IOMUX_PAD(0x0668, 0x0298, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__CHEETAH_TRACE_13 = IOMUX_PAD(0x0668, 0x0298, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__IPU1_CSI0_D_17 = IOMUX_PAD(0x066C, 0x029C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__WEIM_WEIM_D_13 = IOMUX_PAD(0x066C, 0x029C, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21 = IOMUX_PAD(0x066C, 0x029C, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x066C, 0x029C, 3, 0x0934, 1, 0), + MX6_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x066C, 0x029C, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__GPIO_6_3 = IOMUX_PAD(0x066C, 0x029C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 = IOMUX_PAD(0x066C, 0x029C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__CHEETAH_TRACE_14 = IOMUX_PAD(0x066C, 0x029C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__IPU1_CSI0_D_18 = IOMUX_PAD(0x0670, 0x02A0, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__WEIM_WEIM_D_14 = IOMUX_PAD(0x0670, 0x02A0, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22 = IOMUX_PAD(0x0670, 0x02A0, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__UART5_CTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x093C, 2, 0), + MX6_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x0670, 0x02A0, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__GPIO_6_4 = IOMUX_PAD(0x0670, 0x02A0, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 = IOMUX_PAD(0x0670, 0x02A0, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__CHEETAH_TRACE_15 = IOMUX_PAD(0x0670, 0x02A0, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__IPU1_CSI0_D_19 = IOMUX_PAD(0x0674, 0x02A4, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__WEIM_WEIM_D_15 = IOMUX_PAD(0x0674, 0x02A4, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23 = IOMUX_PAD(0x0674, 0x02A4, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x0674, 0x02A4, 3, 0x093C, 3, 0), + MX6_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x0674, 0x02A4, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__GPIO_6_5 = IOMUX_PAD(0x0674, 0x02A4, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 = IOMUX_PAD(0x0674, 0x02A4, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__ANATOP_TESTO_9 = IOMUX_PAD(0x0674, 0x02A4, 7, 0x0000, 0, 0), + MX6_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x0678, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x067C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TRSTB__SJC_TRSTB = IOMUX_PAD(0x0680, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x0684, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x0688, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x068C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_POR_B__SRC_POR_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_BOOT_MODE1__SRC_BOOT_MODE_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_RESET_IN_B__SRC_RESET_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_BOOT_MODE0__SRC_BOOT_MODE_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__USDHC3_DAT7 = IOMUX_PAD(0x0690, 0x02A8, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__UART1_TXD_RXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0920, 2, 0), + MX6_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 = IOMUX_PAD(0x0690, 0x02A8, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__GPIO_6_17 = IOMUX_PAD(0x0690, 0x02A8, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 = IOMUX_PAD(0x0690, 0x02A8, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__USBPHY2_CLK20DIV = IOMUX_PAD(0x0690, 0x02A8, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__USDHC3_DAT6 = IOMUX_PAD(0x0694, 0x02AC, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0920, 3, 0), + MX6_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 = IOMUX_PAD(0x0694, 0x02AC, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__GPIO_6_18 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13 = IOMUX_PAD(0x0694, 0x02AC, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__ANATOP_TESTO_10 = IOMUX_PAD(0x0694, 0x02AC, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__USDHC3_DAT5 = IOMUX_PAD(0x0698, 0x02B0, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__UART2_TXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__UART2_TXD_RXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0928, 4, 0), + MX6_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 = IOMUX_PAD(0x0698, 0x02B0, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 = IOMUX_PAD(0x0698, 0x02B0, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__ANATOP_TESTO_11 = IOMUX_PAD(0x0698, 0x02B0, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__USDHC3_DAT4 = IOMUX_PAD(0x069C, 0x02B4, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__UART2_RXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0928, 5, 0), + MX6_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 = IOMUX_PAD(0x069C, 0x02B4, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__GPIO_7_1 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15 = IOMUX_PAD(0x069C, 0x02B4, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__ANATOP_TESTO_12 = IOMUX_PAD(0x069C, 0x02B4, 7, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06A0, 0x02B8, 16, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__UART2_CTS = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0924, 2, 0), + MX6_PAD_SD3_CMD__CAN1_TXCAN = IOMUX_PAD(0x06A0, 0x02B8, 2, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 3, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 4, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__GPIO_7_2 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16 = IOMUX_PAD(0x06A0, 0x02B8, 6, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__ANATOP_TESTO_13 = IOMUX_PAD(0x06A0, 0x02B8, 7, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06A4, 0x02BC, 0, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__UART2_CTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__UART2_RTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0924, 3, 0), + MX6_PAD_SD3_CLK__CAN1_RXCAN = IOMUX_PAD(0x06A4, 0x02BC, 2, 0x07E4, 2, 0), + MX6_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 3, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 4, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__GPIO_7_3 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17 = IOMUX_PAD(0x06A4, 0x02BC, 6, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__ANATOP_TESTO_14 = IOMUX_PAD(0x06A4, 0x02BC, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06A8, 0x02C0, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__UART1_CTS = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x091C, 2, 0), + MX6_PAD_SD3_DAT0__CAN2_TXCAN = IOMUX_PAD(0x06A8, 0x02C0, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__GPIO_7_4 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18 = IOMUX_PAD(0x06A8, 0x02C0, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__ANATOP_TESTO_15 = IOMUX_PAD(0x06A8, 0x02C0, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x06AC, 0x02C4, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__UART1_CTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__UART1_RTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x091C, 3, 0), + MX6_PAD_SD3_DAT1__CAN2_RXCAN = IOMUX_PAD(0x06AC, 0x02C4, 2, 0x07E8, 1, 0), + MX6_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__GPIO_7_5 = IOMUX_PAD(0x06AC, 0x02C4, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19 = IOMUX_PAD(0x06AC, 0x02C4, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__ANATOP_TESTI_0 = IOMUX_PAD(0x06AC, 0x02C4, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x06B0, 0x02C8, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__PCIE_CTRL_MUX_28 = IOMUX_PAD(0x06B0, 0x02C8, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__GPIO_7_6 = IOMUX_PAD(0x06B0, 0x02C8, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20 = IOMUX_PAD(0x06B0, 0x02C8, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__ANATOP_TESTI_1 = IOMUX_PAD(0x06B0, 0x02C8, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x06B4, 0x02CC, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__UART3_CTS = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x092C, 4, 0), + MX6_PAD_SD3_DAT3__PCIE_CTRL_MUX_29 = IOMUX_PAD(0x06B4, 0x02CC, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__GPIO_7_7 = IOMUX_PAD(0x06B4, 0x02CC, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21 = IOMUX_PAD(0x06B4, 0x02CC, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__ANATOP_TESTI_2 = IOMUX_PAD(0x06B4, 0x02CC, 7, 0x0000, 0, 0), + MX6_PAD_SD3_RST__USDHC3_RST = IOMUX_PAD(0x06B8, 0x02D0, 0, 0x0000, 0, 0), + MX6_PAD_SD3_RST__UART3_CTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), + MX6_PAD_SD3_RST__UART3_RTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x092C, 5, 0), + MX6_PAD_SD3_RST__PCIE_CTRL_MUX_30 = IOMUX_PAD(0x06B8, 0x02D0, 2, 0x0000, 0, 0), + MX6_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 3, 0x0000, 0, 0), + MX6_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 4, 0x0000, 0, 0), + MX6_PAD_SD3_RST__GPIO_7_8 = IOMUX_PAD(0x06B8, 0x02D0, 5, 0x0000, 0, 0), + MX6_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22 = IOMUX_PAD(0x06B8, 0x02D0, 6, 0x0000, 0, 0), + MX6_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 = IOMUX_PAD(0x06B8, 0x02D0, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__RAWNAND_CLE = IOMUX_PAD(0x06BC, 0x02D4, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__IPU2_SISG_4 = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__PCIE_CTRL_MUX_31 = IOMUX_PAD(0x06BC, 0x02D4, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__GPIO_6_7 = IOMUX_PAD(0x06BC, 0x02D4, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23 = IOMUX_PAD(0x06BC, 0x02D4, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__TPSMP_HTRANS_0 = IOMUX_PAD(0x06BC, 0x02D4, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__RAWNAND_ALE = IOMUX_PAD(0x06C0, 0x02D8, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__USDHC4_RST = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__PCIE_CTRL_MUX_0 = IOMUX_PAD(0x06C0, 0x02D8, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__GPIO_6_8 = IOMUX_PAD(0x06C0, 0x02D8, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24 = IOMUX_PAD(0x06C0, 0x02D8, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__TPSMP_HTRANS_1 = IOMUX_PAD(0x06C0, 0x02D8, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__RAWNAND_RESETN = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__IPU2_SISG_5 = IOMUX_PAD(0x06C4, 0x02DC, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1 = IOMUX_PAD(0x06C4, 0x02DC, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__GPIO_6_9 = IOMUX_PAD(0x06C4, 0x02DC, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32 = IOMUX_PAD(0x06C4, 0x02DC, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0 = IOMUX_PAD(0x06C4, 0x02DC, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__RAWNAND_READY0 = IOMUX_PAD(0x06C8, 0x02E0, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__IPU2_DI0_PIN1 = IOMUX_PAD(0x06C8, 0x02E0, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__PCIE_CTRL_MUX_2 = IOMUX_PAD(0x06C8, 0x02E0, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__GPIO_6_10 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33 = IOMUX_PAD(0x06C8, 0x02E0, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__PL301_PER1_HSIZE_1 = IOMUX_PAD(0x06C8, 0x02E0, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__RAWNAND_CE0N = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__GPIO_6_11 = IOMUX_PAD(0x06CC, 0x02E4, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__PL301_PER1_HSIZE_2 = IOMUX_PAD(0x06CC, 0x02E4, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__RAWNAND_CE1N = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__USDHC4_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__USDHC3_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__PCIE_CTRL_MUX_3 = IOMUX_PAD(0x06D0, 0x02E8, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x06D0, 0x02E8, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__PL301_PER1_HRDYOUT = IOMUX_PAD(0x06D0, 0x02E8, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__RAWNAND_CE2N = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__IPU1_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x06D4, 0x02EC, 2, 0x0874, 1, 0), + MX6_PAD_NANDF_CS2__WEIM_WEIM_CRE = IOMUX_PAD(0x06D4, 0x02EC, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__CCM_CLKO2 = IOMUX_PAD(0x06D4, 0x02EC, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x06D4, 0x02EC, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__IPU2_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__RAWNAND_CE3N = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__IPU1_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x06D8, 0x02F0, 2, 0x0878, 1, 0), + MX6_PAD_NANDF_CS3__WEIM_WEIM_A_26 = IOMUX_PAD(0x06D8, 0x02F0, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__PCIE_CTRL_MUX_4 = IOMUX_PAD(0x06D8, 0x02F0, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__IPU2_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__TPSMP_CLK = IOMUX_PAD(0x06D8, 0x02F0, 7, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x06DC, 0x02F4, 16, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__RAWNAND_RDN = IOMUX_PAD(0x06DC, 0x02F4, 1, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__UART3_TXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__UART3_TXD_RXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0930, 2, 0), + MX6_PAD_SD4_CMD__PCIE_CTRL_MUX_5 = IOMUX_PAD(0x06DC, 0x02F4, 4, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__GPIO_7_9 = IOMUX_PAD(0x06DC, 0x02F4, 5, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__TPSMP_HDATA_DIR = IOMUX_PAD(0x06DC, 0x02F4, 7, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x06E0, 0x02F8, 0, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__RAWNAND_WRN = IOMUX_PAD(0x06E0, 0x02F8, 1, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__UART3_RXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0930, 3, 0), + MX6_PAD_SD4_CLK__PCIE_CTRL_MUX_6 = IOMUX_PAD(0x06E0, 0x02F8, 4, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__GPIO_7_10 = IOMUX_PAD(0x06E0, 0x02F8, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__RAWNAND_D0 = IOMUX_PAD(0x06E4, 0x02FC, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__USDHC1_DAT4 = IOMUX_PAD(0x06E4, 0x02FC, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0 = IOMUX_PAD(0x06E4, 0x02FC, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__GPIO_2_0 = IOMUX_PAD(0x06E4, 0x02FC, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__RAWNAND_D1 = IOMUX_PAD(0x06E8, 0x0300, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__USDHC1_DAT5 = IOMUX_PAD(0x06E8, 0x0300, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1 = IOMUX_PAD(0x06E8, 0x0300, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x06E8, 0x0300, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__RAWNAND_D2 = IOMUX_PAD(0x06EC, 0x0304, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__USDHC1_DAT6 = IOMUX_PAD(0x06EC, 0x0304, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2 = IOMUX_PAD(0x06EC, 0x0304, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x06EC, 0x0304, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__RAWNAND_D3 = IOMUX_PAD(0x06F0, 0x0308, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__USDHC1_DAT7 = IOMUX_PAD(0x06F0, 0x0308, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3 = IOMUX_PAD(0x06F0, 0x0308, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x06F0, 0x0308, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__RAWNAND_D4 = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__USDHC2_DAT4 = IOMUX_PAD(0x06F4, 0x030C, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4 = IOMUX_PAD(0x06F4, 0x030C, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x06F4, 0x030C, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__RAWNAND_D5 = IOMUX_PAD(0x06F8, 0x0310, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__USDHC2_DAT5 = IOMUX_PAD(0x06F8, 0x0310, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5 = IOMUX_PAD(0x06F8, 0x0310, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__GPIO_2_5 = IOMUX_PAD(0x06F8, 0x0310, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__RAWNAND_D6 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__USDHC2_DAT6 = IOMUX_PAD(0x06FC, 0x0314, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6 = IOMUX_PAD(0x06FC, 0x0314, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x06FC, 0x0314, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__RAWNAND_D7 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__USDHC2_DAT7 = IOMUX_PAD(0x0700, 0x0318, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7 = IOMUX_PAD(0x0700, 0x0318, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__GPIO_2_7 = IOMUX_PAD(0x0700, 0x0318, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__RAWNAND_D8 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0704, 0x031C, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__RAWNAND_DQS = IOMUX_PAD(0x0704, 0x031C, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__GPIO_2_8 = IOMUX_PAD(0x0704, 0x031C, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__RAWNAND_D9 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x0708, 0x0320, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__PWM3_PWMO = IOMUX_PAD(0x0708, 0x0320, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__GPIO_2_9 = IOMUX_PAD(0x0708, 0x0320, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__RAWNAND_D10 = IOMUX_PAD(0x070C, 0x0324, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x070C, 0x0324, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__PWM4_PWMO = IOMUX_PAD(0x070C, 0x0324, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__GPIO_2_10 = IOMUX_PAD(0x070C, 0x0324, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__RAWNAND_D11 = IOMUX_PAD(0x0710, 0x0328, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0710, 0x0328, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__GPIO_2_11 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__RAWNAND_D12 = IOMUX_PAD(0x0714, 0x032C, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__USDHC4_DAT4 = IOMUX_PAD(0x0714, 0x032C, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__UART2_RXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0928, 6, 0), + MX6_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__GPIO_2_12 = IOMUX_PAD(0x0714, 0x032C, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__RAWNAND_D13 = IOMUX_PAD(0x0718, 0x0330, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__USDHC4_DAT5 = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__UART2_CTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__UART2_RTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0924, 4, 0), + MX6_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__GPIO_2_13 = IOMUX_PAD(0x0718, 0x0330, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__RAWNAND_D14 = IOMUX_PAD(0x071C, 0x0334, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__USDHC4_DAT6 = IOMUX_PAD(0x071C, 0x0334, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__UART2_CTS = IOMUX_PAD(0x071C, 0x0334, 2, 0x0924, 5, 0), + MX6_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__GPIO_2_14 = IOMUX_PAD(0x071C, 0x0334, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__RAWNAND_D15 = IOMUX_PAD(0x0720, 0x0338, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__USDHC4_DAT7 = IOMUX_PAD(0x0720, 0x0338, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__UART2_TXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__UART2_TXD_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0928, 7, 0), + MX6_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__GPIO_2_15 = IOMUX_PAD(0x0720, 0x0338, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x0724, 0x033C, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0724, 0x033C, 1, 0x0834, 1, 0), + MX6_PAD_SD1_DAT1__PWM3_PWMO = IOMUX_PAD(0x0724, 0x033C, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__GPT_CAPIN2 = IOMUX_PAD(0x0724, 0x033C, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__PCIE_CTRL_MUX_7 = IOMUX_PAD(0x0724, 0x033C, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__GPIO_1_17 = IOMUX_PAD(0x0724, 0x033C, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 = IOMUX_PAD(0x0724, 0x033C, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__ANATOP_TESTO_8 = IOMUX_PAD(0x0724, 0x033C, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x0728, 0x0340, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0728, 0x0340, 1, 0x082C, 1, 0), + MX6_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS = IOMUX_PAD(0x0728, 0x0340, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__GPT_CAPIN1 = IOMUX_PAD(0x0728, 0x0340, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__PCIE_CTRL_MUX_8 = IOMUX_PAD(0x0728, 0x0340, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__GPIO_1_16 = IOMUX_PAD(0x0728, 0x0340, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 = IOMUX_PAD(0x0728, 0x0340, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__ANATOP_TESTO_7 = IOMUX_PAD(0x0728, 0x0340, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x072C, 0x0344, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__ECSPI5_SS2 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__GPT_CMPOUT3 = IOMUX_PAD(0x072C, 0x0344, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__PWM1_PWMO = IOMUX_PAD(0x072C, 0x0344, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__WDOG2_WDOG_B = IOMUX_PAD(0x072C, 0x0344, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x072C, 0x0344, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x072C, 0x0344, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__ANATOP_TESTO_6 = IOMUX_PAD(0x072C, 0x0344, 7, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0730, 0x0348, 16, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0730, 0x0348, 1, 0x0830, 0, 0), + MX6_PAD_SD1_CMD__PWM4_PWMO = IOMUX_PAD(0x0730, 0x0348, 2, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x0730, 0x0348, 3, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x0730, 0x0348, 5, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__ANATOP_TESTO_5 = IOMUX_PAD(0x0730, 0x0348, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x0734, 0x034C, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0838, 1, 0), + MX6_PAD_SD1_DAT2__GPT_CMPOUT2 = IOMUX_PAD(0x0734, 0x034C, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__PWM2_PWMO = IOMUX_PAD(0x0734, 0x034C, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__WDOG1_WDOG_B = IOMUX_PAD(0x0734, 0x034C, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__GPIO_1_19 = IOMUX_PAD(0x0734, 0x034C, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0734, 0x034C, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__ANATOP_TESTO_4 = IOMUX_PAD(0x0734, 0x034C, 7, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x0738, 0x0350, 0, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__ECSPI5_SCLK = IOMUX_PAD(0x0738, 0x0350, 1, 0x0828, 0, 0), + MX6_PAD_SD1_CLK__OSC32K_32K_OUT = IOMUX_PAD(0x0738, 0x0350, 2, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x0738, 0x0350, 3, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__GPIO_1_20 = IOMUX_PAD(0x0738, 0x0350, 5, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 6, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__SATA_PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 7, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x073C, 0x0354, 0, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__ECSPI5_SCLK = IOMUX_PAD(0x073C, 0x0354, 1, 0x0828, 1, 0), + MX6_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x073C, 0x0354, 2, 0x08E8, 3, 0), + MX6_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x073C, 0x0354, 3, 0x07C0, 1, 0), + MX6_PAD_SD2_CLK__PCIE_CTRL_MUX_9 = IOMUX_PAD(0x073C, 0x0354, 4, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__GPIO_1_10 = IOMUX_PAD(0x073C, 0x0354, 5, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 6, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__SATA_PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 7, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0740, 0x0358, 16, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0740, 0x0358, 1, 0x0830, 1, 0), + MX6_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x0740, 0x0358, 2, 0x08F4, 2, 0), + MX6_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x0740, 0x0358, 3, 0x07BC, 1, 0), + MX6_PAD_SD2_CMD__PCIE_CTRL_MUX_10 = IOMUX_PAD(0x0740, 0x0358, 4, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__GPIO_1_11 = IOMUX_PAD(0x0740, 0x0358, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0744, 0x035C, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__ECSPI5_SS3 = IOMUX_PAD(0x0744, 0x035C, 1, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__KPP_COL_6 = IOMUX_PAD(0x0744, 0x035C, 2, 0x08EC, 2, 0), + MX6_PAD_SD2_DAT3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x0744, 0x035C, 3, 0x07C4, 1, 0), + MX6_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 = IOMUX_PAD(0x0744, 0x035C, 4, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__GPIO_1_12 = IOMUX_PAD(0x0744, 0x035C, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__SJC_DONE = IOMUX_PAD(0x0744, 0x035C, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__ANATOP_TESTO_3 = IOMUX_PAD(0x0744, 0x035C, 7, 0x0000, 0, 0), +}; + +#endif /* __ASM_ARCH_MX6_MX6Q_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h deleted file mode 100644 index 3ade8dc433..0000000000 --- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h +++ /dev/null @@ -1,1671 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - * - * Auto Generate file, please don't edit it - * - */ - -#ifndef __ASM_ARCH_MX6_MX6X_PINS_H__ -#define __ASM_ARCH_MX6_MX6X_PINS_H__ - -#include <asm/imx-common/iomux-v3.h> - -/* Use to set PAD control */ -#define PAD_CTL_HYS (1 << 16) -#define PAD_CTL_PUS_100K_DOWN (0 << 14) -#define PAD_CTL_PUS_47K_UP (1 << 14) -#define PAD_CTL_PUS_100K_UP (2 << 14) -#define PAD_CTL_PUS_22K_UP (3 << 14) - -#define PAD_CTL_PUE (1 << 13) -#define PAD_CTL_PKE (1 << 12) -#define PAD_CTL_ODE (1 << 11) -#define PAD_CTL_SPEED_LOW (1 << 6) -#define PAD_CTL_SPEED_MED (2 << 6) -#define PAD_CTL_SPEED_HIGH (3 << 6) -#define PAD_CTL_DSE_DISABLE (0 << 3) -#define PAD_CTL_DSE_240ohm (1 << 3) -#define PAD_CTL_DSE_120ohm (2 << 3) -#define PAD_CTL_DSE_80ohm (3 << 3) -#define PAD_CTL_DSE_60ohm (4 << 3) -#define PAD_CTL_DSE_48ohm (5 << 3) -#define PAD_CTL_DSE_40ohm (6 << 3) -#define PAD_CTL_DSE_34ohm (7 << 3) -#define PAD_CTL_SRE_FAST (1 << 0) -#define PAD_CTL_SRE_SLOW (0 << 0) - -#define NO_MUX_I 0 -#define NO_PAD_I 0 - -enum { - MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0), - MX6Q_PAD_SD2_DAT1__WEIM_WEIM_CS_2 = IOMUX_PAD(0x0360, 0x004C, 2, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x0360, 0x004C, 3, 0x07C8, 0, 0), - MX6Q_PAD_SD2_DAT1__KPP_COL_7 = IOMUX_PAD(0x0360, 0x004C, 4, 0x08F0, 0, 0), - MX6Q_PAD_SD2_DAT1__GPIO_1_14 = IOMUX_PAD(0x0360, 0x004C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT1__CCM_WAIT = IOMUX_PAD(0x0360, 0x004C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT1__ANATOP_TESTO_0 = IOMUX_PAD(0x0360, 0x004C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x0364, 0x0050, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0364, 0x0050, 1, 0x0838, 0, 0), - MX6Q_PAD_SD2_DAT2__WEIM_WEIM_CS_3 = IOMUX_PAD(0x0364, 0x0050, 2, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x07B8, 0, 0), - MX6Q_PAD_SD2_DAT2__KPP_ROW_6 = IOMUX_PAD(0x0364, 0x0050, 4, 0x08F8, 0, 0), - MX6Q_PAD_SD2_DAT2__GPIO_1_13 = IOMUX_PAD(0x0364, 0x0050, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__CCM_STOP = IOMUX_PAD(0x0364, 0x0050, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__ANATOP_TESTO_1 = IOMUX_PAD(0x0364, 0x0050, 7, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0368, 0x0054, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0368, 0x0054, 1, 0x082C, 0, 0), - MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x0368, 0x0054, 3, 0x07B4, 0, 0), - MX6Q_PAD_SD2_DAT0__KPP_ROW_7 = IOMUX_PAD(0x0368, 0x0054, 4, 0x08FC, 0, 0), - MX6Q_PAD_SD2_DAT0__GPIO_1_15 = IOMUX_PAD(0x0368, 0x0054, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT = IOMUX_PAD(0x0368, 0x0054, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT0__TESTO_2 = IOMUX_PAD(0x0368, 0x0054, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA = IOMUX_PAD(0x036C, 0x0058, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x036C, 0x0058, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x036C, 0x0058, 2, 0x0918, 0, 0), - MX6Q_PAD_RGMII_TXC__GPIO_6_19 = IOMUX_PAD(0x036C, 0x0058, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0 = IOMUX_PAD(0x036C, 0x0058, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__ANATOP_24M_OUT = IOMUX_PAD(0x036C, 0x0058, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY = IOMUX_PAD(0x0370, 0x005C, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x0370, 0x005C, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD0__GPIO_6_20 = IOMUX_PAD(0x0370, 0x005C, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1 = IOMUX_PAD(0x0370, 0x005C, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG = IOMUX_PAD(0x0374, 0x0060, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x0374, 0x0060, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__GPIO_6_21 = IOMUX_PAD(0x0374, 0x0060, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2 = IOMUX_PAD(0x0374, 0x0060, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__CCM_PLL3_BYP = IOMUX_PAD(0x0374, 0x0060, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA = IOMUX_PAD(0x0378, 0x0064, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x0378, 0x0064, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__GPIO_6_22 = IOMUX_PAD(0x0378, 0x0064, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3 = IOMUX_PAD(0x0378, 0x0064, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__CCM_PLL2_BYP = IOMUX_PAD(0x0378, 0x0064, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK = IOMUX_PAD(0x037C, 0x0068, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x037C, 0x0068, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD3__GPIO_6_23 = IOMUX_PAD(0x037C, 0x0068, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4 = IOMUX_PAD(0x037C, 0x0068, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA = IOMUX_PAD(0x0380, 0x006C, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x0380, 0x006C, 1, 0x0858, 0, 0), - MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x0380, 0x006C, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5 = IOMUX_PAD(0x0380, 0x006C, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY = IOMUX_PAD(0x0384, 0x0070, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0384, 0x0070, 1, 0x0848, 0, 0), - MX6Q_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0384, 0x0070, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6 = IOMUX_PAD(0x0384, 0x0070, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE = IOMUX_PAD(0x0388, 0x0074, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x0388, 0x0074, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26 = IOMUX_PAD(0x0388, 0x0074, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7 = IOMUX_PAD(0x0388, 0x0074, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__ANATOP_REF_OUT = IOMUX_PAD(0x0388, 0x0074, 7, 0x083C, 0, 0), - MX6Q_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL = IOMUX_PAD(0x038C, 0x0078, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x038C, 0x0078, 1, 0x084C, 0, 0), - MX6Q_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x038C, 0x0078, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8 = IOMUX_PAD(0x038C, 0x0078, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD1__SJC_FAIL = IOMUX_PAD(0x038C, 0x0078, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA = IOMUX_PAD(0x0390, 0x007C, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x0390, 0x007C, 1, 0x0850, 0, 0), - MX6Q_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x0390, 0x007C, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9 = IOMUX_PAD(0x0390, 0x007C, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK = IOMUX_PAD(0x0394, 0x0080, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x0394, 0x0080, 1, 0x0854, 0, 0), - MX6Q_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x0394, 0x0080, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10 = IOMUX_PAD(0x0394, 0x0080, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE = IOMUX_PAD(0x0398, 0x0084, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x0398, 0x0084, 1, 0x0844, 0, 0), - MX6Q_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x0398, 0x0084, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11 = IOMUX_PAD(0x0398, 0x0084, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__WEIM_WEIM_A_25 = IOMUX_PAD(0x039C, 0x0088, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__ECSPI4_SS1 = IOMUX_PAD(0x039C, 0x0088, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x039C, 0x0088, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 = IOMUX_PAD(0x039C, 0x0088, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS = IOMUX_PAD(0x039C, 0x0088, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__GPIO_5_2 = IOMUX_PAD(0x039C, 0x0088, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE = IOMUX_PAD(0x039C, 0x0088, 6, 0x088C, 0, 0), - MX6Q_PAD_EIM_A25__PL301_PER1_HBURST_0 = IOMUX_PAD(0x039C, 0x0088, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB2__WEIM_WEIM_EB_2 = IOMUX_PAD(0x03A0, 0x008C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x03A0, 0x008C, 1, 0x0800, 0, 0), - MX6Q_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x03A0, 0x008C, 2, 0x07EC, 0, 0), - MX6Q_PAD_EIM_EB2__IPU2_CSI1_D_19 = IOMUX_PAD(0x03A0, 0x008C, 3, 0x08D4, 0, 0), - MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL = IOMUX_PAD(0x03A0, 0x008C, 4, 0x0890, 0, 0), - MX6Q_PAD_EIM_EB2__GPIO_2_30 = IOMUX_PAD(0x03A0, 0x008C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x03A0, 0x008C, 22, 0x08A0, 0, 0), - MX6Q_PAD_EIM_EB2__SRC_BT_CFG_30 = IOMUX_PAD(0x03A0, 0x008C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D16__WEIM_WEIM_D_16 = IOMUX_PAD(0x03A4, 0x0090, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x03A4, 0x0090, 1, 0x07F4, 0, 0), - MX6Q_PAD_EIM_D16__IPU1_DI0_PIN5 = IOMUX_PAD(0x03A4, 0x0090, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D16__IPU2_CSI1_D_18 = IOMUX_PAD(0x03A4, 0x0090, 3, 0x08D0, 0, 0), - MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA = IOMUX_PAD(0x03A4, 0x0090, 4, 0x0894, 0, 0), - MX6Q_PAD_EIM_D16__GPIO_3_16 = IOMUX_PAD(0x03A4, 0x0090, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x03A4, 0x0090, 22, 0x08A4, 0, 0), - MX6Q_PAD_EIM_D17__WEIM_WEIM_D_17 = IOMUX_PAD(0x03A8, 0x0094, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x03A8, 0x0094, 1, 0x07F8, 0, 0), - MX6Q_PAD_EIM_D17__IPU1_DI0_PIN6 = IOMUX_PAD(0x03A8, 0x0094, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x03A8, 0x0094, 3, 0x08E0, 0, 0), - MX6Q_PAD_EIM_D17__DCIC1_DCIC_OUT = IOMUX_PAD(0x03A8, 0x0094, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D17__GPIO_3_17 = IOMUX_PAD(0x03A8, 0x0094, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x03A8, 0x0094, 22, 0x08A8, 0, 0), - MX6Q_PAD_EIM_D17__PL301_PER1_HBURST_1 = IOMUX_PAD(0x03A8, 0x0094, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__WEIM_WEIM_D_18 = IOMUX_PAD(0x03AC, 0x0098, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x03AC, 0x0098, 1, 0x07FC, 0, 0), - MX6Q_PAD_EIM_D18__IPU1_DI0_PIN7 = IOMUX_PAD(0x03AC, 0x0098, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__IPU2_CSI1_D_17 = IOMUX_PAD(0x03AC, 0x0098, 3, 0x08CC, 0, 0), - MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS = IOMUX_PAD(0x03AC, 0x0098, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__GPIO_3_18 = IOMUX_PAD(0x03AC, 0x0098, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x03AC, 0x0098, 22, 0x08AC, 0, 0), - MX6Q_PAD_EIM_D18__PL301_PER1_HBURST_2 = IOMUX_PAD(0x03AC, 0x0098, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__WEIM_WEIM_D_19 = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x03B0, 0x009C, 1, 0x0804, 0, 0), - MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8 = IOMUX_PAD(0x03B0, 0x009C, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16 = IOMUX_PAD(0x03B0, 0x009C, 3, 0x08C8, 0, 0), - MX6Q_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x03B0, 0x009C, 4, 0x091C, 0, 0), - MX6Q_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x03B0, 0x009C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x03B0, 0x009C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__PL301MX6QPER1_HRESP = IOMUX_PAD(0x03B0, 0x009C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__WEIM_WEIM_D_20 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__ECSPI4_SS0 = IOMUX_PAD(0x03B4, 0x00A0, 1, 0x0824, 0, 0), - MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 = IOMUX_PAD(0x03B4, 0x00A0, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03B4, 0x00A0, 3, 0x08C4, 0, 0), - MX6Q_PAD_EIM_D20__UART1_CTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x091C, 1, 0), - MX6Q_PAD_EIM_D20__GPIO_3_20 = IOMUX_PAD(0x03B4, 0x00A0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x03B4, 0x00A0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__WEIM_WEIM_D_21 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__ECSPI4_SCLK = IOMUX_PAD(0x03B8, 0x00A4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 = IOMUX_PAD(0x03B8, 0x00A4, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__IPU2_CSI1_D_11 = IOMUX_PAD(0x03B8, 0x00A4, 3, 0x08B4, 0, 0), - MX6Q_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x03B8, 0x00A4, 4, 0x0944, 0, 0), - MX6Q_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x03B8, 0x00A4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x03B8, 0x00A4, 22, 0x0898, 0, 0), - MX6Q_PAD_EIM_D21__SPDIF_IN1 = IOMUX_PAD(0x03B8, 0x00A4, 7, 0x0914, 0, 0), - MX6Q_PAD_EIM_D22__WEIM_WEIM_D_22 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__ECSPI4_MISO = IOMUX_PAD(0x03BC, 0x00A8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__IPU1_DI0_PIN1 = IOMUX_PAD(0x03BC, 0x00A8, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__IPU2_CSI1_D_10 = IOMUX_PAD(0x03BC, 0x00A8, 3, 0x08B0, 0, 0), - MX6Q_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x03BC, 0x00A8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__GPIO_3_22 = IOMUX_PAD(0x03BC, 0x00A8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__SPDIF_OUT1 = IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__PL301MX6QPER1_HWRITE = IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__WEIM_WEIM_D_23 = IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS = IOMUX_PAD(0x03C0, 0x00AC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x03C0, 0x00AC, 2, 0x092C, 0, 0), - MX6Q_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x03C0, 0x00AC, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x03C0, 0x00AC, 4, 0x08D8, 0, 0), - MX6Q_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__IPU1_DI1_PIN2 = IOMUX_PAD(0x03C0, 0x00AC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 = IOMUX_PAD(0x03C0, 0x00AC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__WEIM_WEIM_EB_3 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__ECSPI4_RDY = IOMUX_PAD(0x03C4, 0x00B0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__UART3_CTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x092C, 1, 0), - MX6Q_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x03C4, 0x00B0, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC = IOMUX_PAD(0x03C4, 0x00B0, 4, 0x08DC, 0, 0), - MX6Q_PAD_EIM_EB3__GPIO_2_31 = IOMUX_PAD(0x03C4, 0x00B0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN3 = IOMUX_PAD(0x03C4, 0x00B0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__SRC_BT_CFG_31 = IOMUX_PAD(0x03C4, 0x00B0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__ECSPI4_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__UART3_TXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__UART3_TXD_RXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0930, 0, 0), - MX6Q_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 3, 0x0808, 0, 0), - MX6Q_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__GPIO_3_24 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x07D8, 0, 0), - MX6Q_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__ECSPI4_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0930, 1, 0), - MX6Q_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x080C, 0, 0), - MX6Q_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__GPIO_3_25 = IOMUX_PAD(0x03CC, 0x00B8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03CC, 0x00B8, 6, 0x07D4, 0, 0), - MX6Q_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x03CC, 0x00B8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__WEIM_WEIM_D_26 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 = IOMUX_PAD(0x03D0, 0x00BC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1 = IOMUX_PAD(0x03D0, 0x00BC, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14 = IOMUX_PAD(0x03D0, 0x00BC, 3, 0x08C0, 0, 0), - MX6Q_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__UART2_TXD_RXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0928, 0, 0), - MX6Q_PAD_EIM_D26__GPIO_3_26 = IOMUX_PAD(0x03D0, 0x00BC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU1_SISG_2 = IOMUX_PAD(0x03D0, 0x00BC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22 = IOMUX_PAD(0x03D0, 0x00BC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__WEIM_WEIM_D_27 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 = IOMUX_PAD(0x03D4, 0x00C0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0 = IOMUX_PAD(0x03D4, 0x00C0, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13 = IOMUX_PAD(0x03D4, 0x00C0, 3, 0x08BC, 0, 0), - MX6Q_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0928, 1, 0), - MX6Q_PAD_EIM_D27__GPIO_3_27 = IOMUX_PAD(0x03D4, 0x00C0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU1_SISG_3 = IOMUX_PAD(0x03D4, 0x00C0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU1_DISP1_DAT_23 = IOMUX_PAD(0x03D4, 0x00C0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__WEIM_WEIM_D_28 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x03D8, 0x00C4, 17, 0x089C, 0, 0), - MX6Q_PAD_EIM_D28__ECSPI4_MOSI = IOMUX_PAD(0x03D8, 0x00C4, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__IPU2_CSI1_D_12 = IOMUX_PAD(0x03D8, 0x00C4, 3, 0x08B8, 0, 0), - MX6Q_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x03D8, 0x00C4, 4, 0x0924, 0, 0), - MX6Q_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x03D8, 0x00C4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG = IOMUX_PAD(0x03D8, 0x00C4, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 = IOMUX_PAD(0x03D8, 0x00C4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__WEIM_WEIM_D_29 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 = IOMUX_PAD(0x03DC, 0x00C8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__ECSPI4_SS0 = IOMUX_PAD(0x03DC, 0x00C8, 2, 0x0824, 1, 0), - MX6Q_PAD_EIM_D29__UART2_CTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0924, 1, 0), - MX6Q_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x03DC, 0x00C8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC = IOMUX_PAD(0x03DC, 0x00C8, 6, 0x08E4, 0, 0), - MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 = IOMUX_PAD(0x03DC, 0x00C8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__WEIM_WEIM_D_30 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__IPU1_DISP1_DAT_21 = IOMUX_PAD(0x03E0, 0x00CC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 = IOMUX_PAD(0x03E0, 0x00CC, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__IPU1_CSI0_D_3 = IOMUX_PAD(0x03E0, 0x00CC, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x03E0, 0x00CC, 4, 0x092C, 2, 0), - MX6Q_PAD_EIM_D30__GPIO_3_30 = IOMUX_PAD(0x03E0, 0x00CC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x03E0, 0x00CC, 6, 0x0948, 0, 0), - MX6Q_PAD_EIM_D30__PL301MX6QPER1_HPROT_0 = IOMUX_PAD(0x03E0, 0x00CC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__WEIM_WEIM_D_31 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__IPU1_DISP1_DAT_20 = IOMUX_PAD(0x03E4, 0x00D0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 = IOMUX_PAD(0x03E4, 0x00D0, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__IPU1_CSI0_D_2 = IOMUX_PAD(0x03E4, 0x00D0, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__UART3_CTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x092C, 3, 0), - MX6Q_PAD_EIM_D31__GPIO_3_31 = IOMUX_PAD(0x03E4, 0x00D0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x03E4, 0x00D0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__PL301MX6QPER1_HPROT_1 = IOMUX_PAD(0x03E4, 0x00D0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__WEIM_WEIM_A_24 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__IPU1_DISP1_DAT_19 = IOMUX_PAD(0x03E8, 0x00D4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__IPU2_CSI1_D_19 = IOMUX_PAD(0x03E8, 0x00D4, 2, 0x08D4, 1, 0), - MX6Q_PAD_EIM_A24__IPU2_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__IPU1_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__GPIO_5_4 = IOMUX_PAD(0x03E8, 0x00D4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__PL301MX6QPER1_HPROT_2 = IOMUX_PAD(0x03E8, 0x00D4, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__SRC_BT_CFG_24 = IOMUX_PAD(0x03E8, 0x00D4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__WEIM_WEIM_A_23 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__IPU1_DISP1_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__IPU2_CSI1_D_18 = IOMUX_PAD(0x03EC, 0x00D8, 2, 0x08D0, 1, 0), - MX6Q_PAD_EIM_A23__IPU2_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__IPU1_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__GPIO_6_6 = IOMUX_PAD(0x03EC, 0x00D8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__PL301MX6QPER1_HPROT_3 = IOMUX_PAD(0x03EC, 0x00D8, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__SRC_BT_CFG_23 = IOMUX_PAD(0x03EC, 0x00D8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__WEIM_WEIM_A_22 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__IPU1_DISP1_DAT_17 = IOMUX_PAD(0x03F0, 0x00DC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__IPU2_CSI1_D_17 = IOMUX_PAD(0x03F0, 0x00DC, 2, 0x08CC, 1, 0), - MX6Q_PAD_EIM_A22__GPIO_2_16 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__TPSMP_HDATA_0 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__SRC_BT_CFG_22 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__WEIM_WEIM_A_21 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__IPU1_DISP1_DAT_16 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__IPU2_CSI1_D_16 = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x08C8, 1, 0), - MX6Q_PAD_EIM_A21__RESERVED_RESERVED = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18 = IOMUX_PAD(0x03F4, 0x00E0, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__GPIO_2_17 = IOMUX_PAD(0x03F4, 0x00E0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__TPSMP_HDATA_1 = IOMUX_PAD(0x03F4, 0x00E0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__SRC_BT_CFG_21 = IOMUX_PAD(0x03F4, 0x00E0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__WEIM_WEIM_A_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__IPU1_DISP1_DAT_15 = IOMUX_PAD(0x03F8, 0x00E4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03F8, 0x00E4, 2, 0x08C4, 1, 0), - MX6Q_PAD_EIM_A20__RESERVED_RESERVED = IOMUX_PAD(0x03F8, 0x00E4, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19 = IOMUX_PAD(0x03F8, 0x00E4, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__GPIO_2_18 = IOMUX_PAD(0x03F8, 0x00E4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__TPSMP_HDATA_2 = IOMUX_PAD(0x03F8, 0x00E4, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__SRC_BT_CFG_20 = IOMUX_PAD(0x03F8, 0x00E4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__WEIM_WEIM_A_19 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__IPU1_DISP1_DAT_14 = IOMUX_PAD(0x03FC, 0x00E8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__IPU2_CSI1_D_14 = IOMUX_PAD(0x03FC, 0x00E8, 2, 0x08C0, 1, 0), - MX6Q_PAD_EIM_A19__RESERVED_RESERVED = IOMUX_PAD(0x03FC, 0x00E8, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20 = IOMUX_PAD(0x03FC, 0x00E8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__GPIO_2_19 = IOMUX_PAD(0x03FC, 0x00E8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__TPSMP_HDATA_3 = IOMUX_PAD(0x03FC, 0x00E8, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__SRC_BT_CFG_19 = IOMUX_PAD(0x03FC, 0x00E8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__WEIM_WEIM_A_18 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__IPU1_DISP1_DAT_13 = IOMUX_PAD(0x0400, 0x00EC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__IPU2_CSI1_D_13 = IOMUX_PAD(0x0400, 0x00EC, 2, 0x08BC, 1, 0), - MX6Q_PAD_EIM_A18__RESERVED_RESERVED = IOMUX_PAD(0x0400, 0x00EC, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21 = IOMUX_PAD(0x0400, 0x00EC, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__GPIO_2_20 = IOMUX_PAD(0x0400, 0x00EC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__TPSMP_HDATA_4 = IOMUX_PAD(0x0400, 0x00EC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__SRC_BT_CFG_18 = IOMUX_PAD(0x0400, 0x00EC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__WEIM_WEIM_A_17 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__IPU1_DISP1_DAT_12 = IOMUX_PAD(0x0404, 0x00F0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__IPU2_CSI1_D_12 = IOMUX_PAD(0x0404, 0x00F0, 2, 0x08B8, 1, 0), - MX6Q_PAD_EIM_A17__RESERVED_RESERVED = IOMUX_PAD(0x0404, 0x00F0, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22 = IOMUX_PAD(0x0404, 0x00F0, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__GPIO_2_21 = IOMUX_PAD(0x0404, 0x00F0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__TPSMP_HDATA_5 = IOMUX_PAD(0x0404, 0x00F0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__SRC_BT_CFG_17 = IOMUX_PAD(0x0404, 0x00F0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__WEIM_WEIM_A_16 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK = IOMUX_PAD(0x0408, 0x00F4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x0408, 0x00F4, 2, 0x08E0, 1, 0), - MX6Q_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23 = IOMUX_PAD(0x0408, 0x00F4, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__GPIO_2_22 = IOMUX_PAD(0x0408, 0x00F4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__TPSMP_HDATA_6 = IOMUX_PAD(0x0408, 0x00F4, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__SRC_BT_CFG_16 = IOMUX_PAD(0x0408, 0x00F4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN5 = IOMUX_PAD(0x040C, 0x00F8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x040C, 0x00F8, 2, 0x0810, 0, 0), - MX6Q_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24 = IOMUX_PAD(0x040C, 0x00F8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__GPIO_2_23 = IOMUX_PAD(0x040C, 0x00F8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__TPSMP_HDATA_7 = IOMUX_PAD(0x040C, 0x00F8, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__WEIM_WEIM_CS_1 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN6 = IOMUX_PAD(0x0410, 0x00FC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x0410, 0x00FC, 2, 0x0818, 0, 0), - MX6Q_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25 = IOMUX_PAD(0x0410, 0x00FC, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__GPIO_2_24 = IOMUX_PAD(0x0410, 0x00FC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__TPSMP_HDATA_8 = IOMUX_PAD(0x0410, 0x00FC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__WEIM_WEIM_OE = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__IPU1_DI1_PIN7 = IOMUX_PAD(0x0414, 0x0100, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x0414, 0x0100, 2, 0x0814, 0, 0), - MX6Q_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26 = IOMUX_PAD(0x0414, 0x0100, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__GPIO_2_25 = IOMUX_PAD(0x0414, 0x0100, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__TPSMP_HDATA_9 = IOMUX_PAD(0x0414, 0x0100, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__WEIM_WEIM_RW = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__IPU1_DI1_PIN8 = IOMUX_PAD(0x0418, 0x0104, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x0418, 0x0104, 2, 0x081C, 0, 0), - MX6Q_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27 = IOMUX_PAD(0x0418, 0x0104, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__GPIO_2_26 = IOMUX_PAD(0x0418, 0x0104, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__TPSMP_HDATA_10 = IOMUX_PAD(0x0418, 0x0104, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__SRC_BT_CFG_29 = IOMUX_PAD(0x0418, 0x0104, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__WEIM_WEIM_LBA = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 = IOMUX_PAD(0x041C, 0x0108, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x041C, 0x0108, 2, 0x0820, 0, 0), - MX6Q_PAD_EIM_LBA__GPIO_2_27 = IOMUX_PAD(0x041C, 0x0108, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__TPSMP_HDATA_11 = IOMUX_PAD(0x041C, 0x0108, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__SRC_BT_CFG_26 = IOMUX_PAD(0x041C, 0x0108, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__WEIM_WEIM_EB_0 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__IPU1_DISP1_DAT_11 = IOMUX_PAD(0x0420, 0x010C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__IPU2_CSI1_D_11 = IOMUX_PAD(0x0420, 0x010C, 2, 0x08B4, 1, 0), - MX6Q_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0 = IOMUX_PAD(0x0420, 0x010C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__CCM_PMIC_RDY = IOMUX_PAD(0x0420, 0x010C, 4, 0x07F0, 0, 0), - MX6Q_PAD_EIM_EB0__GPIO_2_28 = IOMUX_PAD(0x0420, 0x010C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__TPSMP_HDATA_12 = IOMUX_PAD(0x0420, 0x010C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__SRC_BT_CFG_27 = IOMUX_PAD(0x0420, 0x010C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__WEIM_WEIM_EB_1 = IOMUX_PAD(0x0424, 0x0110, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__IPU1_DISP1_DAT_10 = IOMUX_PAD(0x0424, 0x0110, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__IPU2_CSI1_D_10 = IOMUX_PAD(0x0424, 0x0110, 2, 0x08B0, 1, 0), - MX6Q_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1 = IOMUX_PAD(0x0424, 0x0110, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__GPIO_2_29 = IOMUX_PAD(0x0424, 0x0110, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__TPSMP_HDATA_13 = IOMUX_PAD(0x0424, 0x0110, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__SRC_BT_CFG_28 = IOMUX_PAD(0x0424, 0x0110, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 = IOMUX_PAD(0x0428, 0x0114, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__IPU1_DISP1_DAT_9 = IOMUX_PAD(0x0428, 0x0114, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__IPU2_CSI1_D_9 = IOMUX_PAD(0x0428, 0x0114, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2 = IOMUX_PAD(0x0428, 0x0114, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__GPIO_3_0 = IOMUX_PAD(0x0428, 0x0114, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__TPSMP_HDATA_14 = IOMUX_PAD(0x0428, 0x0114, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__SRC_BT_CFG_0 = IOMUX_PAD(0x0428, 0x0114, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 = IOMUX_PAD(0x042C, 0x0118, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__IPU1_DISP1_DAT_8 = IOMUX_PAD(0x042C, 0x0118, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__IPU2_CSI1_D_8 = IOMUX_PAD(0x042C, 0x0118, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3 = IOMUX_PAD(0x042C, 0x0118, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__USBPHY1_TX_LS_MODE = IOMUX_PAD(0x042C, 0x0118, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__GPIO_3_1 = IOMUX_PAD(0x042C, 0x0118, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__TPSMP_HDATA_15 = IOMUX_PAD(0x042C, 0x0118, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__SRC_BT_CFG_1 = IOMUX_PAD(0x042C, 0x0118, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 = IOMUX_PAD(0x0430, 0x011C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__IPU1_DISP1_DAT_7 = IOMUX_PAD(0x0430, 0x011C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__IPU2_CSI1_D_7 = IOMUX_PAD(0x0430, 0x011C, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4 = IOMUX_PAD(0x0430, 0x011C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__USBPHY1_TX_HS_MODE = IOMUX_PAD(0x0430, 0x011C, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__GPIO_3_2 = IOMUX_PAD(0x0430, 0x011C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__TPSMP_HDATA_16 = IOMUX_PAD(0x0430, 0x011C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__SRC_BT_CFG_2 = IOMUX_PAD(0x0430, 0x011C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 = IOMUX_PAD(0x0434, 0x0120, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__IPU1_DISP1_DAT_6 = IOMUX_PAD(0x0434, 0x0120, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__IPU2_CSI1_D_6 = IOMUX_PAD(0x0434, 0x0120, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5 = IOMUX_PAD(0x0434, 0x0120, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__USBPHY1_TX_HIZ = IOMUX_PAD(0x0434, 0x0120, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__GPIO_3_3 = IOMUX_PAD(0x0434, 0x0120, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__TPSMP_HDATA_17 = IOMUX_PAD(0x0434, 0x0120, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__SRC_BT_CFG_3 = IOMUX_PAD(0x0434, 0x0120, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 = IOMUX_PAD(0x0438, 0x0124, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__IPU1_DISP1_DAT_5 = IOMUX_PAD(0x0438, 0x0124, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__IPU2_CSI1_D_5 = IOMUX_PAD(0x0438, 0x0124, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6 = IOMUX_PAD(0x0438, 0x0124, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN = IOMUX_PAD(0x0438, 0x0124, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__GPIO_3_4 = IOMUX_PAD(0x0438, 0x0124, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__TPSMP_HDATA_18 = IOMUX_PAD(0x0438, 0x0124, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__SRC_BT_CFG_4 = IOMUX_PAD(0x0438, 0x0124, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 = IOMUX_PAD(0x043C, 0x0128, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__IPU1_DISP1_DAT_4 = IOMUX_PAD(0x043C, 0x0128, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__IPU2_CSI1_D_4 = IOMUX_PAD(0x043C, 0x0128, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7 = IOMUX_PAD(0x043C, 0x0128, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP = IOMUX_PAD(0x043C, 0x0128, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__GPIO_3_5 = IOMUX_PAD(0x043C, 0x0128, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__TPSMP_HDATA_19 = IOMUX_PAD(0x043C, 0x0128, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__SRC_BT_CFG_5 = IOMUX_PAD(0x043C, 0x0128, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 = IOMUX_PAD(0x0440, 0x012C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__IPU1_DISP1_DAT_3 = IOMUX_PAD(0x0440, 0x012C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__IPU2_CSI1_D_3 = IOMUX_PAD(0x0440, 0x012C, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8 = IOMUX_PAD(0x0440, 0x012C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN = IOMUX_PAD(0x0440, 0x012C, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__GPIO_3_6 = IOMUX_PAD(0x0440, 0x012C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__TPSMP_HDATA_20 = IOMUX_PAD(0x0440, 0x012C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__SRC_BT_CFG_6 = IOMUX_PAD(0x0440, 0x012C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 = IOMUX_PAD(0x0444, 0x0130, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__IPU1_DISP1_DAT_2 = IOMUX_PAD(0x0444, 0x0130, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__IPU2_CSI1_D_2 = IOMUX_PAD(0x0444, 0x0130, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9 = IOMUX_PAD(0x0444, 0x0130, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__GPIO_3_7 = IOMUX_PAD(0x0444, 0x0130, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__TPSMP_HDATA_21 = IOMUX_PAD(0x0444, 0x0130, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__SRC_BT_CFG_7 = IOMUX_PAD(0x0444, 0x0130, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 = IOMUX_PAD(0x0448, 0x0134, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__IPU1_DISP1_DAT_1 = IOMUX_PAD(0x0448, 0x0134, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__IPU2_CSI1_D_1 = IOMUX_PAD(0x0448, 0x0134, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10 = IOMUX_PAD(0x0448, 0x0134, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__GPIO_3_8 = IOMUX_PAD(0x0448, 0x0134, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__TPSMP_HDATA_22 = IOMUX_PAD(0x0448, 0x0134, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__SRC_BT_CFG_8 = IOMUX_PAD(0x0448, 0x0134, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 = IOMUX_PAD(0x044C, 0x0138, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__IPU1_DISP1_DAT_0 = IOMUX_PAD(0x044C, 0x0138, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__IPU2_CSI1_D_0 = IOMUX_PAD(0x044C, 0x0138, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11 = IOMUX_PAD(0x044C, 0x0138, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x044C, 0x0138, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__TPSMP_HDATA_23 = IOMUX_PAD(0x044C, 0x0138, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__SRC_BT_CFG_9 = IOMUX_PAD(0x044C, 0x0138, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 = IOMUX_PAD(0x0450, 0x013C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 = IOMUX_PAD(0x0450, 0x013C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x0450, 0x013C, 2, 0x08D8, 1, 0), - MX6Q_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12 = IOMUX_PAD(0x0450, 0x013C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__GPIO_3_10 = IOMUX_PAD(0x0450, 0x013C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__TPSMP_HDATA_24 = IOMUX_PAD(0x0450, 0x013C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__SRC_BT_CFG_10 = IOMUX_PAD(0x0450, 0x013C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 = IOMUX_PAD(0x0454, 0x0140, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN2 = IOMUX_PAD(0x0454, 0x0140, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC = IOMUX_PAD(0x0454, 0x0140, 2, 0x08DC, 1, 0), - MX6Q_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13 = IOMUX_PAD(0x0454, 0x0140, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6 = IOMUX_PAD(0x0454, 0x0140, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__GPIO_3_11 = IOMUX_PAD(0x0454, 0x0140, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__TPSMP_HDATA_25 = IOMUX_PAD(0x0454, 0x0140, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__SRC_BT_CFG_11 = IOMUX_PAD(0x0454, 0x0140, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 = IOMUX_PAD(0x0458, 0x0144, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN3 = IOMUX_PAD(0x0458, 0x0144, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC = IOMUX_PAD(0x0458, 0x0144, 2, 0x08E4, 1, 0), - MX6Q_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14 = IOMUX_PAD(0x0458, 0x0144, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3 = IOMUX_PAD(0x0458, 0x0144, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__GPIO_3_12 = IOMUX_PAD(0x0458, 0x0144, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__TPSMP_HDATA_26 = IOMUX_PAD(0x0458, 0x0144, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__SRC_BT_CFG_12 = IOMUX_PAD(0x0458, 0x0144, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 = IOMUX_PAD(0x045C, 0x0148, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS = IOMUX_PAD(0x045C, 0x0148, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x045C, 0x0148, 2, 0x07EC, 1, 0), - MX6Q_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15 = IOMUX_PAD(0x045C, 0x0148, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4 = IOMUX_PAD(0x045C, 0x0148, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__GPIO_3_13 = IOMUX_PAD(0x045C, 0x0148, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__TPSMP_HDATA_27 = IOMUX_PAD(0x045C, 0x0148, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__SRC_BT_CFG_13 = IOMUX_PAD(0x045C, 0x0148, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 = IOMUX_PAD(0x0460, 0x014C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS = IOMUX_PAD(0x0460, 0x014C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x0460, 0x014C, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16 = IOMUX_PAD(0x0460, 0x014C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5 = IOMUX_PAD(0x0460, 0x014C, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__GPIO_3_14 = IOMUX_PAD(0x0460, 0x014C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__TPSMP_HDATA_28 = IOMUX_PAD(0x0460, 0x014C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__SRC_BT_CFG_14 = IOMUX_PAD(0x0460, 0x014C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 = IOMUX_PAD(0x0464, 0x0150, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN1 = IOMUX_PAD(0x0464, 0x0150, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN4 = IOMUX_PAD(0x0464, 0x0150, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17 = IOMUX_PAD(0x0464, 0x0150, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__GPIO_3_15 = IOMUX_PAD(0x0464, 0x0150, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__TPSMP_HDATA_29 = IOMUX_PAD(0x0464, 0x0150, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__SRC_BT_CFG_15 = IOMUX_PAD(0x0464, 0x0150, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT = IOMUX_PAD(0x0468, 0x0154, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B = IOMUX_PAD(0x0468, 0x0154, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__GPIO_5_0 = IOMUX_PAD(0x0468, 0x0154, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__TPSMP_HDATA_30 = IOMUX_PAD(0x0468, 0x0154, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__SRC_BT_CFG_25 = IOMUX_PAD(0x0468, 0x0154, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_BCLK__WEIM_WEIM_BCLK = IOMUX_PAD(0x046C, 0x0158, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2 = IOMUX_PAD(0x0478, 0x0164, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3 = IOMUX_PAD(0x047C, 0x0168, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__GPIO_4_19 = IOMUX_PAD(0x047C, 0x0168, 5, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 = IOMUX_PAD(0x047C, 0x0168, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__PL301_PER1_HADDR_10 = IOMUX_PAD(0x047C, 0x0168, 7, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 0, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0), - MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL = IOMUX_PAD(0x0488, 0x0174, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x048C, 0x0178, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR = IOMUX_PAD(0x0490, 0x017C, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x0494, 0x0180, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS = IOMUX_PAD(0x0498, 0x0184, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT = IOMUX_PAD(0x049C, 0x0188, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0 = IOMUX_PAD(0x04A0, 0x018C, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1 = IOMUX_PAD(0x04A4, 0x0190, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2 = IOMUX_PAD(0x04A8, 0x0194, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0), - MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0), - MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0), - MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0), - MX6Q_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2 = IOMUX_PAD(0x04C0, 0x01AC, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0), - MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0), - MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x04C4, 0x01B0, 4, 0x090C, 0, 0), - MX6Q_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0), - MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0), - MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x04C8, 0x01B4, 4, 0x0910, 0, 0), - MX6Q_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0), - MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0), - MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x04CC, 0x01B8, 4, 0x07C0, 0, 0), - MX6Q_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0), - MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0), - MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x04D0, 0x01BC, 4, 0x07BC, 0, 0), - MX6Q_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0), - MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0), - MX6Q_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7 = IOMUX_PAD(0x04D4, 0x01C0, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0), - MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0), - MX6Q_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0 = IOMUX_PAD(0x04D8, 0x01C4, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0), - MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0), - MX6Q_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1 = IOMUX_PAD(0x04DC, 0x01C8, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0), - MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0), - MX6Q_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2 = IOMUX_PAD(0x04E0, 0x01CC, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__GPIO_5_17 = IOMUX_PAD(0x04E0, 0x01CC, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__MMDC_DEBUG_28 = IOMUX_PAD(0x04E0, 0x01CC, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__PL301_PER1_HADR31 = IOMUX_PAD(0x04E0, 0x01CC, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__RESERVED_RESERVED = IOMUX_PAD(0x04E4, 0x01D0, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x04E4, 0x01D0, 1, 0x0840, 0, 0), - MX6Q_PAD_ENET_MDIO__ESAI1_SCKR = IOMUX_PAD(0x04E4, 0x01D0, 2, 0x086C, 0, 0), - MX6Q_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3 = IOMUX_PAD(0x04E4, 0x01D0, 3, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__ENET_1588_EVT1_OUT = IOMUX_PAD(0x04E4, 0x01D0, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__GPIO_1_22 = IOMUX_PAD(0x04E4, 0x01D0, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__SPDIF_PLOCK = IOMUX_PAD(0x04E4, 0x01D0, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__RESERVED_RSRVED = IOMUX_PAD(0x04E8, 0x01D4, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x04E8, 0x01D4, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x04E8, 0x01D4, 2, 0x085C, 0, 0), - MX6Q_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4 = IOMUX_PAD(0x04E8, 0x01D4, 3, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__GPIO_1_23 = IOMUX_PAD(0x04E8, 0x01D4, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__SPDIF_SRCLK = IOMUX_PAD(0x04E8, 0x01D4, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__USBPHY1_RX_SQH = IOMUX_PAD(0x04E8, 0x01D4, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__ENET_RX_ER = IOMUX_PAD(0x04EC, 0x01D8, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x04EC, 0x01D8, 2, 0x0864, 0, 0), - MX6Q_PAD_ENET_RX_ER__SPDIF_IN1 = IOMUX_PAD(0x04EC, 0x01D8, 3, 0x0914, 1, 0), - MX6Q_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT = IOMUX_PAD(0x04EC, 0x01D8, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__GPIO_1_24 = IOMUX_PAD(0x04EC, 0x01D8, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__PHY_TDI = IOMUX_PAD(0x04EC, 0x01D8, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD = IOMUX_PAD(0x04EC, 0x01D8, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_CRS_DV__RESERVED_RSRVED = IOMUX_PAD(0x04F0, 0x01DC, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN = IOMUX_PAD(0x04F0, 0x01DC, 1, 0x0858, 1, 0), - MX6Q_PAD_ENET_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x04F0, 0x01DC, 2, 0x0870, 0, 0), - MX6Q_PAD_ENET_CRS_DV__SPDIF_EXTCLK = IOMUX_PAD(0x04F0, 0x01DC, 3, 0x0918, 1, 0), - MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 = IOMUX_PAD(0x04F0, 0x01DC, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_CRS_DV__PHY_TDO = IOMUX_PAD(0x04F0, 0x01DC, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD = IOMUX_PAD(0x04F0, 0x01DC, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD1__MLB_MLBSIG = IOMUX_PAD(0x04F4, 0x01E0, 0, 0x0908, 0, 0), - MX6Q_PAD_ENET_RXD1__ENET_RDATA_1 = IOMUX_PAD(0x04F4, 0x01E0, 1, 0x084C, 1, 0), - MX6Q_PAD_ENET_RXD1__ESAI1_FST = IOMUX_PAD(0x04F4, 0x01E0, 2, 0x0860, 0, 0), - MX6Q_PAD_ENET_RXD1__ENET_1588_EVT3_OUT = IOMUX_PAD(0x04F4, 0x01E0, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD1__GPIO_1_26 = IOMUX_PAD(0x04F4, 0x01E0, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD1__PHY_TCK = IOMUX_PAD(0x04F4, 0x01E0, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD1__USBPHY1_RX_DISCON = IOMUX_PAD(0x04F4, 0x01E0, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__OSC32K_32K_OUT = IOMUX_PAD(0x04F8, 0x01E4, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__ENET_RDATA_0 = IOMUX_PAD(0x04F8, 0x01E4, 1, 0x0848, 1, 0), - MX6Q_PAD_ENET_RXD0__ESAI1_HCKT = IOMUX_PAD(0x04F8, 0x01E4, 2, 0x0868, 0, 0), - MX6Q_PAD_ENET_RXD0__SPDIF_OUT1 = IOMUX_PAD(0x04F8, 0x01E4, 3, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x04F8, 0x01E4, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__PHY_TMS = IOMUX_PAD(0x04F8, 0x01E4, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV = IOMUX_PAD(0x04F8, 0x01E4, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__RESERVED_RSRVED = IOMUX_PAD(0x04FC, 0x01E8, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__ENET_TX_EN = IOMUX_PAD(0x04FC, 0x01E8, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x04FC, 0x01E8, 2, 0x0880, 0, 0), - MX6Q_PAD_ENET_TX_EN__GPIO_1_28 = IOMUX_PAD(0x04FC, 0x01E8, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__SATA_PHY_TDI = IOMUX_PAD(0x04FC, 0x01E8, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__USBPHY2_RX_SQH = IOMUX_PAD(0x04FC, 0x01E8, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__MLB_MLBCLK = IOMUX_PAD(0x0500, 0x01EC, 0, 0x0900, 0, 0), - MX6Q_PAD_ENET_TXD1__ENET_TDATA_1 = IOMUX_PAD(0x0500, 0x01EC, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x0500, 0x01EC, 2, 0x087C, 0, 0), - MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN = IOMUX_PAD(0x0500, 0x01EC, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__GPIO_1_29 = IOMUX_PAD(0x0500, 0x01EC, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__SATA_PHY_TDO = IOMUX_PAD(0x0500, 0x01EC, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD = IOMUX_PAD(0x0500, 0x01EC, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__RESERVED_RSRVED = IOMUX_PAD(0x0504, 0x01F0, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__ENET_TDATA_0 = IOMUX_PAD(0x0504, 0x01F0, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x0504, 0x01F0, 2, 0x0884, 0, 0), - MX6Q_PAD_ENET_TXD0__GPIO_1_30 = IOMUX_PAD(0x0504, 0x01F0, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__SATA_PHY_TCK = IOMUX_PAD(0x0504, 0x01F0, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD = IOMUX_PAD(0x0504, 0x01F0, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__MLB_MLBDAT = IOMUX_PAD(0x0508, 0x01F4, 0, 0x0904, 0, 0), - MX6Q_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x0508, 0x01F4, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x0508, 0x01F4, 2, 0x0888, 0, 0), - MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN = IOMUX_PAD(0x0508, 0x01F4, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__GPIO_1_31 = IOMUX_PAD(0x0508, 0x01F4, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__SATA_PHY_TMS = IOMUX_PAD(0x0508, 0x01F4, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__USBPHY2_RX_DISCON = IOMUX_PAD(0x0508, 0x01F4, 7, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D40__MMDC_DRAM_D_40 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D41__MMDC_DRAM_D_41 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D42__MMDC_DRAM_D_42 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D43__MMDC_DRAM_D_43 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D44__MMDC_DRAM_D_44 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D45__MMDC_DRAM_D_45 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D46__MMDC_DRAM_D_46 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D47__MMDC_DRAM_D_47 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 = IOMUX_PAD(0x050C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 = IOMUX_PAD(0x0510, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D32__MMDC_DRAM_D_32 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D33__MMDC_DRAM_D_33 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D34__MMDC_DRAM_D_34 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D35__MMDC_DRAM_D_35 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D36__MMDC_DRAM_D_36 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D37__MMDC_DRAM_D_37 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D38__MMDC_DRAM_D_38 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D39__MMDC_DRAM_D_39 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 = IOMUX_PAD(0x0514, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 = IOMUX_PAD(0x0518, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D24__MMDC_DRAM_D_24 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D25__MMDC_DRAM_D_25 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D26__MMDC_DRAM_D_26 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D27__MMDC_DRAM_D_27 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D28__MMDC_DRAM_D_28 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D29__MMDC_DRAM_D_29 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 = IOMUX_PAD(0x051C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D30__MMDC_DRAM_D_30 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D31__MMDC_DRAM_D_31 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 = IOMUX_PAD(0x0520, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D16__MMDC_DRAM_D_16 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D17__MMDC_DRAM_D_17 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D18__MMDC_DRAM_D_18 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D19__MMDC_DRAM_D_19 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D20__MMDC_DRAM_D_20 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D21__MMDC_DRAM_D_21 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D22__MMDC_DRAM_D_22 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 = IOMUX_PAD(0x0524, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D23__MMDC_DRAM_D_23 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 = IOMUX_PAD(0x0528, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A0__MMDC_DRAM_A_0 = IOMUX_PAD(0x052C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A1__MMDC_DRAM_A_1 = IOMUX_PAD(0x0530, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A2__MMDC_DRAM_A_2 = IOMUX_PAD(0x0534, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A3__MMDC_DRAM_A_3 = IOMUX_PAD(0x0538, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A4__MMDC_DRAM_A_4 = IOMUX_PAD(0x053C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A5__MMDC_DRAM_A_5 = IOMUX_PAD(0x0540, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A6__MMDC_DRAM_A_6 = IOMUX_PAD(0x0544, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A7__MMDC_DRAM_A_7 = IOMUX_PAD(0x0548, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A8__MMDC_DRAM_A_8 = IOMUX_PAD(0x054C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A9__MMDC_DRAM_A_9 = IOMUX_PAD(0x0550, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A10__MMDC_DRAM_A_10 = IOMUX_PAD(0x0554, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A11__MMDC_DRAM_A_11 = IOMUX_PAD(0x0558, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A12__MMDC_DRAM_A_12 = IOMUX_PAD(0x055C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A13__MMDC_DRAM_A_13 = IOMUX_PAD(0x0560, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A14__MMDC_DRAM_A_14 = IOMUX_PAD(0x0564, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A15__MMDC_DRAM_A_15 = IOMUX_PAD(0x0568, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_CAS__MMDC_DRAM_CAS = IOMUX_PAD(0x056C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_CS0__MMDC_DRAM_CS_0 = IOMUX_PAD(0x0570, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_CS1__MMDC_DRAM_CS_1 = IOMUX_PAD(0x0574, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_RAS__MMDC_DRAM_RAS = IOMUX_PAD(0x0578, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_RESET__MMDC_DRAM_RESET = IOMUX_PAD(0x057C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 = IOMUX_PAD(0x0580, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 = IOMUX_PAD(0x0584, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 = IOMUX_PAD(0x0588, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 = IOMUX_PAD(0x058C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 = IOMUX_PAD(0x0590, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 = IOMUX_PAD(0x0594, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 = IOMUX_PAD(0x0598, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 = IOMUX_PAD(0x059C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 = IOMUX_PAD(0x05A0, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDWE__MMDC_DRAM_SDWE = IOMUX_PAD(0x05A4, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D0__MMDC_DRAM_D_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D1__MMDC_DRAM_D_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D2__MMDC_DRAM_D_2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D3__MMDC_DRAM_D_3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D4__MMDC_DRAM_D_4 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D5__MMDC_DRAM_D_5 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 = IOMUX_PAD(0x05A8, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D6__MMDC_DRAM_D_6 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D7__MMDC_DRAM_D_7 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 = IOMUX_PAD(0x05AC, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D8__MMDC_DRAM_D_8 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D9__MMDC_DRAM_D_9 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D10__MMDC_DRAM_D_10 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D11__MMDC_DRAM_D_11 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D12__MMDC_DRAM_D_12 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D13__MMDC_DRAM_D_13 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D14__MMDC_DRAM_D_14 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 = IOMUX_PAD(0x05B0, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D15__MMDC_DRAM_D_15 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 = IOMUX_PAD(0x05B4, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D48__MMDC_DRAM_D_48 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D49__MMDC_DRAM_D_49 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D50__MMDC_DRAM_D_50 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D51__MMDC_DRAM_D_51 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D52__MMDC_DRAM_D_52 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D53__MMDC_DRAM_D_53 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D54__MMDC_DRAM_D_54 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D55__MMDC_DRAM_D_55 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 = IOMUX_PAD(0x05B8, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 = IOMUX_PAD(0x05BC, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D56__MMDC_DRAM_D_56 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 = IOMUX_PAD(0x05C0, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D57__MMDC_DRAM_D_57 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D58__MMDC_DRAM_D_58 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D59__MMDC_DRAM_D_59 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D60__MMDC_DRAM_D_60 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 = IOMUX_PAD(0x05C4, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D61__MMDC_DRAM_D_61 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D62__MMDC_DRAM_D_62 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D63__MMDC_DRAM_D_63 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x05C8, 0x01F8, 0, 0x07F4, 2, 0), - MX6Q_PAD_KEY_COL0__ENET_RDATA_3 = IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0854, 1, 0), - MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x05C8, 0x01F8, 2, 0x07DC, 1, 0), - MX6Q_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x05C8, 0x01F8, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__UART4_TXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__UART4_TXD_RXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0938, 0, 0), - MX6Q_PAD_KEY_COL0__GPIO_4_6 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT = IOMUX_PAD(0x05C8, 0x01F8, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x05C8, 0x01F8, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x05CC, 0x01FC, 0, 0x07FC, 2, 0), - MX6Q_PAD_KEY_ROW0__ENET_TDATA_3 = IOMUX_PAD(0x05CC, 0x01FC, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x05CC, 0x01FC, 2, 0x07D0, 1, 0), - MX6Q_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x05CC, 0x01FC, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__UART4_RXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0938, 1, 0), - MX6Q_PAD_KEY_ROW0__GPIO_4_7 = IOMUX_PAD(0x05CC, 0x01FC, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT = IOMUX_PAD(0x05CC, 0x01FC, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__PL301_PER1_HADR_0 = IOMUX_PAD(0x05CC, 0x01FC, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x05D0, 0x0200, 0, 0x07F8, 2, 0), - MX6Q_PAD_KEY_COL1__ENET_MDIO = IOMUX_PAD(0x05D0, 0x0200, 1, 0x0840, 1, 0), - MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x05D0, 0x0200, 2, 0x07E0, 1, 0), - MX6Q_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x05D0, 0x0200, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__UART5_TXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__UART5_TXD_RXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0940, 0, 0), - MX6Q_PAD_KEY_COL1__GPIO_4_8 = IOMUX_PAD(0x05D0, 0x0200, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__USDHC1_VSELECT = IOMUX_PAD(0x05D0, 0x0200, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1 = IOMUX_PAD(0x05D0, 0x0200, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x05D4, 0x0204, 0, 0x0800, 2, 0), - MX6Q_PAD_KEY_ROW1__ENET_COL = IOMUX_PAD(0x05D4, 0x0204, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x05D4, 0x0204, 2, 0x07CC, 1, 0), - MX6Q_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x05D4, 0x0204, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__UART5_RXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0940, 1, 0), - MX6Q_PAD_KEY_ROW1__GPIO_4_9 = IOMUX_PAD(0x05D4, 0x0204, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT = IOMUX_PAD(0x05D4, 0x0204, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__PL301_PER1_HADDR_2 = IOMUX_PAD(0x05D4, 0x0204, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x05D8, 0x0208, 0, 0x0804, 2, 0), - MX6Q_PAD_KEY_COL2__ENET_RDATA_2 = IOMUX_PAD(0x05D8, 0x0208, 1, 0x0850, 1, 0), - MX6Q_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x05D8, 0x0208, 2, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x05D8, 0x0208, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__ENET_MDC = IOMUX_PAD(0x05D8, 0x0208, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__GPIO_4_10 = IOMUX_PAD(0x05D8, 0x0208, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP = IOMUX_PAD(0x05D8, 0x0208, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__PL301_PER1_HADDR_3 = IOMUX_PAD(0x05D8, 0x0208, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x05DC, 0x020C, 0, 0x0808, 1, 0), - MX6Q_PAD_KEY_ROW2__ENET_TDATA_2 = IOMUX_PAD(0x05DC, 0x020C, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x05DC, 0x020C, 2, 0x07E4, 0, 0), - MX6Q_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x05DC, 0x020C, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__USDHC2_VSELECT = IOMUX_PAD(0x05DC, 0x020C, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__GPIO_4_11 = IOMUX_PAD(0x05DC, 0x020C, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE = IOMUX_PAD(0x05DC, 0x020C, 6, 0x088C, 1, 0), - MX6Q_PAD_KEY_ROW2__PL301_PER1_HADR_4 = IOMUX_PAD(0x05DC, 0x020C, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x05E0, 0x0210, 0, 0x080C, 1, 0), - MX6Q_PAD_KEY_COL3__ENET_CRS = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL = IOMUX_PAD(0x05E0, 0x0210, 2, 0x0890, 1, 0), - MX6Q_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x05E0, 0x0210, 20, 0x08A0, 1, 0), - MX6Q_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0914, 2, 0), - MX6Q_PAD_KEY_COL3__PL301_PER1_HADR_5 = IOMUX_PAD(0x05E0, 0x0210, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x05E4, 0x0214, 0, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05E4, 0x0214, 1, 0x07B0, 0, 0), - MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA = IOMUX_PAD(0x05E4, 0x0214, 2, 0x0894, 1, 0), - MX6Q_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x05E4, 0x0214, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x05E4, 0x0214, 20, 0x08A4, 1, 0), - MX6Q_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__USDHC1_VSELECT = IOMUX_PAD(0x05E4, 0x0214, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__PL301_PER1_HADR_6 = IOMUX_PAD(0x05E4, 0x0214, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x05E8, 0x0218, 0, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__IPU1_SISG_4 = IOMUX_PAD(0x05E8, 0x0218, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x05E8, 0x0218, 2, 0x0944, 1, 0), - MX6Q_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x05E8, 0x0218, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__UART5_CTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x093C, 0, 0), - MX6Q_PAD_KEY_COL4__GPIO_4_14 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__MMDC_DEBUG_49 = IOMUX_PAD(0x05E8, 0x0218, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__PL301_PER1_HADDR_7 = IOMUX_PAD(0x05E8, 0x0218, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x05EC, 0x021C, 0, 0x07E8, 0, 0), - MX6Q_PAD_KEY_ROW4__IPU1_SISG_5 = IOMUX_PAD(0x05EC, 0x021C, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x05EC, 0x021C, 2, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x05EC, 0x021C, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x05EC, 0x021C, 4, 0x093C, 1, 0), - MX6Q_PAD_KEY_ROW4__GPIO_4_15 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__MMDC_DEBUG_50 = IOMUX_PAD(0x05EC, 0x021C, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__PL301_PER1_HADR_8 = IOMUX_PAD(0x05EC, 0x021C, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x05F0, 0x0220, 0, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x05F0, 0x0220, 2, 0x08E8, 0, 0), - MX6Q_PAD_GPIO_0__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05F0, 0x0220, 3, 0x07B0, 1, 0), - MX6Q_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x05F0, 0x0220, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__GPIO_1_0 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x05F0, 0x0220, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5 = IOMUX_PAD(0x05F0, 0x0220, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0), - MX6Q_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0), - MX6Q_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x05F4, 0x0224, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x05F8, 0x0228, 0, 0x085C, 1, 0), - MX6Q_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x05F8, 0x0228, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x05F8, 0x0228, 2, 0x08EC, 0, 0), - MX6Q_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x05F8, 0x0228, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x05F8, 0x0228, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__GPIO_1_9 = IOMUX_PAD(0x05F8, 0x0228, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__USDHC1_WP = IOMUX_PAD(0x05F8, 0x0228, 6, 0x094C, 1, 0), - MX6Q_PAD_GPIO_9__SRC_EARLY_RST = IOMUX_PAD(0x05F8, 0x0228, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x05FC, 0x022C, 0, 0x0864, 1, 0), - MX6Q_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0 = IOMUX_PAD(0x05FC, 0x022C, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x05FC, 0x022C, 18, 0x08A8, 1, 0), - MX6Q_PAD_GPIO_3__ANATOP_24M_OUT = IOMUX_PAD(0x05FC, 0x022C, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x05FC, 0x022C, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__GPIO_1_3 = IOMUX_PAD(0x05FC, 0x022C, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x05FC, 0x022C, 6, 0x0948, 1, 0), - MX6Q_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x05FC, 0x022C, 7, 0x0900, 1, 0), - MX6Q_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x0600, 0x0230, 0, 0x0870, 1, 0), - MX6Q_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1 = IOMUX_PAD(0x0600, 0x0230, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x0600, 0x0230, 18, 0x08AC, 1, 0), - MX6Q_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x0600, 0x0230, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x0600, 0x0230, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__GPIO_1_6 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__USDHC2_LCTL = IOMUX_PAD(0x0600, 0x0230, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x0600, 0x0230, 7, 0x0908, 1, 0), - MX6Q_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x0604, 0x0234, 0, 0x0860, 1, 0), - MX6Q_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2 = IOMUX_PAD(0x0604, 0x0234, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x0604, 0x0234, 2, 0x08F8, 1, 0), - MX6Q_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x0604, 0x0234, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x0604, 0x0234, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x0604, 0x0234, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__USDHC2_WP = IOMUX_PAD(0x0604, 0x0234, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x0604, 0x0234, 7, 0x0904, 1, 0), - MX6Q_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x0608, 0x0238, 0, 0x0868, 1, 0), - MX6Q_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3 = IOMUX_PAD(0x0608, 0x0238, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x0608, 0x0238, 2, 0x08F0, 1, 0), - MX6Q_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x0608, 0x0238, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x0608, 0x0238, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__GPIO_1_4 = IOMUX_PAD(0x0608, 0x0238, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__USDHC2_CD = IOMUX_PAD(0x0608, 0x0238, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x060C, 0x023C, 0, 0x087C, 1, 0), - MX6Q_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4 = IOMUX_PAD(0x060C, 0x023C, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x060C, 0x023C, 2, 0x08FC, 1, 0), - MX6Q_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x060C, 0x023C, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x060C, 0x023C, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x060C, 0x023C, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x060C, 0x023C, 22, 0x08A8, 2, 0), - MX6Q_PAD_GPIO_5__CHEETAH_EVENTI = IOMUX_PAD(0x060C, 0x023C, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x0610, 0x0240, 0, 0x0884, 1, 0), - MX6Q_PAD_GPIO_7__ECSPI5_RDY = IOMUX_PAD(0x0610, 0x0240, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x0610, 0x0240, 2, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x0610, 0x0240, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__UART2_TXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__UART2_TXD_RXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0928, 2, 0), - MX6Q_PAD_GPIO_7__GPIO_1_7 = IOMUX_PAD(0x0610, 0x0240, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x0610, 0x0240, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE = IOMUX_PAD(0x0610, 0x0240, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x0614, 0x0244, 0, 0x0888, 1, 0), - MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT = IOMUX_PAD(0x0614, 0x0244, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x0614, 0x0244, 2, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x0614, 0x0244, 3, 0x07E4, 1, 0), - MX6Q_PAD_GPIO_8__UART2_RXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0928, 3, 0), - MX6Q_PAD_GPIO_8__GPIO_1_8 = IOMUX_PAD(0x0614, 0x0244, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x0614, 0x0244, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK = IOMUX_PAD(0x0614, 0x0244, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x0618, 0x0248, 0, 0x0880, 1, 0), - MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN = IOMUX_PAD(0x0618, 0x0248, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_16__ENET_ETHERNET_REF_OUT = IOMUX_PAD(0x0618, 0x0248, 2, 0x083C, 1, 0), - MX6Q_PAD_GPIO_16__USDHC1_LCTL = IOMUX_PAD(0x0618, 0x0248, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x0618, 0x0248, 4, 0x0914, 3, 0), - MX6Q_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x0618, 0x0248, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x0618, 0x0248, 22, 0x08AC, 2, 0), - MX6Q_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x0618, 0x0248, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x061C, 0x024C, 0, 0x0874, 0, 0), - MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN = IOMUX_PAD(0x061C, 0x024C, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_17__CCM_PMIC_RDY = IOMUX_PAD(0x061C, 0x024C, 2, 0x07F0, 1, 0), - MX6Q_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 = IOMUX_PAD(0x061C, 0x024C, 3, 0x090C, 1, 0), - MX6Q_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x061C, 0x024C, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x061C, 0x024C, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x061C, 0x024C, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x0620, 0x0250, 0, 0x0878, 0, 0), - MX6Q_PAD_GPIO_18__ENET_RX_CLK = IOMUX_PAD(0x0620, 0x0250, 1, 0x0844, 1, 0), - MX6Q_PAD_GPIO_18__USDHC3_VSELECT = IOMUX_PAD(0x0620, 0x0250, 2, 0x0000, 0, 0), - MX6Q_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 = IOMUX_PAD(0x0620, 0x0250, 3, 0x0910, 1, 0), - MX6Q_PAD_GPIO_18__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x0620, 0x0250, 4, 0x07B0, 2, 0), - MX6Q_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x0620, 0x0250, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5 = IOMUX_PAD(0x0620, 0x0250, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x0620, 0x0250, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x0624, 0x0254, 0, 0x08E8, 1, 0), - MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT = IOMUX_PAD(0x0624, 0x0254, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x0624, 0x0254, 2, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x0624, 0x0254, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x0624, 0x0254, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x0624, 0x0254, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__ENET_TX_ER = IOMUX_PAD(0x0624, 0x0254, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x0624, 0x0254, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK = IOMUX_PAD(0x0628, 0x0258, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12 = IOMUX_PAD(0x0628, 0x0258, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x0628, 0x0258, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__GPIO_5_18 = IOMUX_PAD(0x0628, 0x0258, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK___MMDC_DEBUG_29 = IOMUX_PAD(0x0628, 0x0258, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__CHEETAH_EVENTO = IOMUX_PAD(0x0628, 0x0258, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC = IOMUX_PAD(0x062C, 0x025C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13 = IOMUX_PAD(0x062C, 0x025C, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__CCM_CLKO = IOMUX_PAD(0x062C, 0x025C, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x062C, 0x025C, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__GPIO_5_19 = IOMUX_PAD(0x062C, 0x025C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 = IOMUX_PAD(0x062C, 0x025C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL = IOMUX_PAD(0x062C, 0x025C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN = IOMUX_PAD(0x0630, 0x0260, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 = IOMUX_PAD(0x0630, 0x0260, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14 = IOMUX_PAD(0x0630, 0x0260, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x0630, 0x0260, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__GPIO_5_20 = IOMUX_PAD(0x0630, 0x0260, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__MMDC_DEBUG_31 = IOMUX_PAD(0x0630, 0x0260, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK = IOMUX_PAD(0x0630, 0x0260, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC = IOMUX_PAD(0x0634, 0x0264, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 = IOMUX_PAD(0x0634, 0x0264, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15 = IOMUX_PAD(0x0634, 0x0264, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x0634, 0x0264, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__GPIO_5_21 = IOMUX_PAD(0x0634, 0x0264, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__MMDC_DEBUG_32 = IOMUX_PAD(0x0634, 0x0264, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0 = IOMUX_PAD(0x0634, 0x0264, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_D_4 = IOMUX_PAD(0x0638, 0x0268, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__WEIM_WEIM_D_2 = IOMUX_PAD(0x0638, 0x0268, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x0638, 0x0268, 2, 0x07F4, 3, 0), - MX6Q_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x0638, 0x0268, 3, 0x08E8, 2, 0), - MX6Q_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x0638, 0x0268, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__GPIO_5_22 = IOMUX_PAD(0x0638, 0x0268, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__MMDC_DEBUG_43 = IOMUX_PAD(0x0638, 0x0268, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1 = IOMUX_PAD(0x0638, 0x0268, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_D_5 = IOMUX_PAD(0x063C, 0x026C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__WEIM_WEIM_D_3 = IOMUX_PAD(0x063C, 0x026C, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x063C, 0x026C, 2, 0x07FC, 3, 0), - MX6Q_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x063C, 0x026C, 3, 0x08F4, 1, 0), - MX6Q_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x063C, 0x026C, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__GPIO_5_23 = IOMUX_PAD(0x063C, 0x026C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 = IOMUX_PAD(0x063C, 0x026C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2 = IOMUX_PAD(0x063C, 0x026C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_D_6 = IOMUX_PAD(0x0640, 0x0270, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__WEIM_WEIM_D_4 = IOMUX_PAD(0x0640, 0x0270, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x0640, 0x0270, 2, 0x07F8, 3, 0), - MX6Q_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x0640, 0x0270, 3, 0x08EC, 1, 0), - MX6Q_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x0640, 0x0270, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__GPIO_5_24 = IOMUX_PAD(0x0640, 0x0270, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 = IOMUX_PAD(0x0640, 0x0270, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3 = IOMUX_PAD(0x0640, 0x0270, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_D_7 = IOMUX_PAD(0x0644, 0x0274, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__WEIM_WEIM_D_5 = IOMUX_PAD(0x0644, 0x0274, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x0644, 0x0274, 2, 0x0800, 3, 0), - MX6Q_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x0644, 0x0274, 3, 0x08F8, 2, 0), - MX6Q_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x0644, 0x0274, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__GPIO_5_25 = IOMUX_PAD(0x0644, 0x0274, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 = IOMUX_PAD(0x0644, 0x0274, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4 = IOMUX_PAD(0x0644, 0x0274, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_D_8 = IOMUX_PAD(0x0648, 0x0278, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__WEIM_WEIM_D_6 = IOMUX_PAD(0x0648, 0x0278, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x0648, 0x0278, 2, 0x0810, 2, 0), - MX6Q_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x0648, 0x0278, 3, 0x08F0, 2, 0), - MX6Q_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x0648, 0x0278, 20, 0x089C, 1, 0), - MX6Q_PAD_CSI0_DAT8__GPIO_5_26 = IOMUX_PAD(0x0648, 0x0278, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 = IOMUX_PAD(0x0648, 0x0278, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5 = IOMUX_PAD(0x0648, 0x0278, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_D_9 = IOMUX_PAD(0x064C, 0x027C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__WEIM_WEIM_D_7 = IOMUX_PAD(0x064C, 0x027C, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x064C, 0x027C, 2, 0x0818, 2, 0), - MX6Q_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x064C, 0x027C, 3, 0x08FC, 2, 0), - MX6Q_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x064C, 0x027C, 20, 0x0898, 1, 0), - MX6Q_PAD_CSI0_DAT9__GPIO_5_27 = IOMUX_PAD(0x064C, 0x027C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 = IOMUX_PAD(0x064C, 0x027C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6 = IOMUX_PAD(0x064C, 0x027C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_D_10 = IOMUX_PAD(0x0650, 0x0280, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0650, 0x0280, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x0650, 0x0280, 2, 0x0814, 2, 0), - MX6Q_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__UART1_TXD_RXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0920, 0, 0), - MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x0650, 0x0280, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__GPIO_5_28 = IOMUX_PAD(0x0650, 0x0280, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 = IOMUX_PAD(0x0650, 0x0280, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7 = IOMUX_PAD(0x0650, 0x0280, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11 = IOMUX_PAD(0x0654, 0x0284, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x0654, 0x0284, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x0654, 0x0284, 2, 0x081C, 2, 0), - MX6Q_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0920, 1, 0), - MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x0654, 0x0284, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__GPIO_5_29 = IOMUX_PAD(0x0654, 0x0284, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 = IOMUX_PAD(0x0654, 0x0284, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8 = IOMUX_PAD(0x0654, 0x0284, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_D_12 = IOMUX_PAD(0x0658, 0x0288, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8 = IOMUX_PAD(0x0658, 0x0288, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 = IOMUX_PAD(0x0658, 0x0288, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__UART4_TXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__UART4_TXD_RXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0938, 2, 0), - MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x0658, 0x0288, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__GPIO_5_30 = IOMUX_PAD(0x0658, 0x0288, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 = IOMUX_PAD(0x0658, 0x0288, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9 = IOMUX_PAD(0x0658, 0x0288, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13 = IOMUX_PAD(0x065C, 0x028C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9 = IOMUX_PAD(0x065C, 0x028C, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 = IOMUX_PAD(0x065C, 0x028C, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__UART4_RXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0938, 3, 0), - MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x065C, 0x028C, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__GPIO_5_31 = IOMUX_PAD(0x065C, 0x028C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 = IOMUX_PAD(0x065C, 0x028C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10 = IOMUX_PAD(0x065C, 0x028C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_D_14 = IOMUX_PAD(0x0660, 0x0290, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10 = IOMUX_PAD(0x0660, 0x0290, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 = IOMUX_PAD(0x0660, 0x0290, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__UART5_TXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__UART5_TXD_RXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0940, 2, 0), - MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0660, 0x0290, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__GPIO_6_0 = IOMUX_PAD(0x0660, 0x0290, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 = IOMUX_PAD(0x0660, 0x0290, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11 = IOMUX_PAD(0x0660, 0x0290, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15 = IOMUX_PAD(0x0664, 0x0294, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11 = IOMUX_PAD(0x0664, 0x0294, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 = IOMUX_PAD(0x0664, 0x0294, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__UART5_RXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0940, 3, 0), - MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x0664, 0x0294, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__GPIO_6_1 = IOMUX_PAD(0x0664, 0x0294, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 = IOMUX_PAD(0x0664, 0x0294, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12 = IOMUX_PAD(0x0664, 0x0294, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_D_16 = IOMUX_PAD(0x0668, 0x0298, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__WEIM_WEIM_D_12 = IOMUX_PAD(0x0668, 0x0298, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20 = IOMUX_PAD(0x0668, 0x0298, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__UART4_CTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0934, 0, 0), - MX6Q_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x0668, 0x0298, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__GPIO_6_2 = IOMUX_PAD(0x0668, 0x0298, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 = IOMUX_PAD(0x0668, 0x0298, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13 = IOMUX_PAD(0x0668, 0x0298, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_D_17 = IOMUX_PAD(0x066C, 0x029C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__WEIM_WEIM_D_13 = IOMUX_PAD(0x066C, 0x029C, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21 = IOMUX_PAD(0x066C, 0x029C, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x066C, 0x029C, 3, 0x0934, 1, 0), - MX6Q_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x066C, 0x029C, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__GPIO_6_3 = IOMUX_PAD(0x066C, 0x029C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 = IOMUX_PAD(0x066C, 0x029C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14 = IOMUX_PAD(0x066C, 0x029C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_D_18 = IOMUX_PAD(0x0670, 0x02A0, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__WEIM_WEIM_D_14 = IOMUX_PAD(0x0670, 0x02A0, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22 = IOMUX_PAD(0x0670, 0x02A0, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__UART5_CTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x093C, 2, 0), - MX6Q_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x0670, 0x02A0, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__GPIO_6_4 = IOMUX_PAD(0x0670, 0x02A0, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 = IOMUX_PAD(0x0670, 0x02A0, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15 = IOMUX_PAD(0x0670, 0x02A0, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_D_19 = IOMUX_PAD(0x0674, 0x02A4, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__WEIM_WEIM_D_15 = IOMUX_PAD(0x0674, 0x02A4, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23 = IOMUX_PAD(0x0674, 0x02A4, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x0674, 0x02A4, 3, 0x093C, 3, 0), - MX6Q_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x0674, 0x02A4, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__GPIO_6_5 = IOMUX_PAD(0x0674, 0x02A4, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 = IOMUX_PAD(0x0674, 0x02A4, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__ANATOP_TESTO_9 = IOMUX_PAD(0x0674, 0x02A4, 7, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x0678, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x067C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TRSTB__SJC_TRSTB = IOMUX_PAD(0x0680, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x0684, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x0688, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x068C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_POR_B__SRC_POR_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_BOOT_MODE1__SRC_BOOT_MODE_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_RESET_IN_B__SRC_RESET_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_BOOT_MODE0__SRC_BOOT_MODE_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 = IOMUX_PAD(0x0690, 0x02A8, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__UART1_TXD_RXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0920, 2, 0), - MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 = IOMUX_PAD(0x0690, 0x02A8, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__GPIO_6_17 = IOMUX_PAD(0x0690, 0x02A8, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 = IOMUX_PAD(0x0690, 0x02A8, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV = IOMUX_PAD(0x0690, 0x02A8, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 = IOMUX_PAD(0x0694, 0x02AC, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0920, 3, 0), - MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 = IOMUX_PAD(0x0694, 0x02AC, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__GPIO_6_18 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13 = IOMUX_PAD(0x0694, 0x02AC, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10 = IOMUX_PAD(0x0694, 0x02AC, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 = IOMUX_PAD(0x0698, 0x02B0, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__UART2_TXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__UART2_TXD_RXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0928, 4, 0), - MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 = IOMUX_PAD(0x0698, 0x02B0, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 = IOMUX_PAD(0x0698, 0x02B0, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11 = IOMUX_PAD(0x0698, 0x02B0, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 = IOMUX_PAD(0x069C, 0x02B4, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__UART2_RXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0928, 5, 0), - MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 = IOMUX_PAD(0x069C, 0x02B4, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__GPIO_7_1 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15 = IOMUX_PAD(0x069C, 0x02B4, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__ANATOP_TESTO_12 = IOMUX_PAD(0x069C, 0x02B4, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06A0, 0x02B8, 16, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__UART2_CTS = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0924, 2, 0), - MX6Q_PAD_SD3_CMD__CAN1_TXCAN = IOMUX_PAD(0x06A0, 0x02B8, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__GPIO_7_2 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16 = IOMUX_PAD(0x06A0, 0x02B8, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__ANATOP_TESTO_13 = IOMUX_PAD(0x06A0, 0x02B8, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06A4, 0x02BC, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__UART2_CTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__UART2_RTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0924, 3, 0), - MX6Q_PAD_SD3_CLK__CAN1_RXCAN = IOMUX_PAD(0x06A4, 0x02BC, 2, 0x07E4, 2, 0), - MX6Q_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__GPIO_7_3 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17 = IOMUX_PAD(0x06A4, 0x02BC, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__ANATOP_TESTO_14 = IOMUX_PAD(0x06A4, 0x02BC, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06A8, 0x02C0, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__UART1_CTS = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x091C, 2, 0), - MX6Q_PAD_SD3_DAT0__CAN2_TXCAN = IOMUX_PAD(0x06A8, 0x02C0, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__GPIO_7_4 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18 = IOMUX_PAD(0x06A8, 0x02C0, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__ANATOP_TESTO_15 = IOMUX_PAD(0x06A8, 0x02C0, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x06AC, 0x02C4, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__UART1_CTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__UART1_RTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x091C, 3, 0), - MX6Q_PAD_SD3_DAT1__CAN2_RXCAN = IOMUX_PAD(0x06AC, 0x02C4, 2, 0x07E8, 1, 0), - MX6Q_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__GPIO_7_5 = IOMUX_PAD(0x06AC, 0x02C4, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19 = IOMUX_PAD(0x06AC, 0x02C4, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__ANATOP_TESTI_0 = IOMUX_PAD(0x06AC, 0x02C4, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x06B0, 0x02C8, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__PCIE_CTRL_MUX_28 = IOMUX_PAD(0x06B0, 0x02C8, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__GPIO_7_6 = IOMUX_PAD(0x06B0, 0x02C8, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20 = IOMUX_PAD(0x06B0, 0x02C8, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__ANATOP_TESTI_1 = IOMUX_PAD(0x06B0, 0x02C8, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x06B4, 0x02CC, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__UART3_CTS = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x092C, 4, 0), - MX6Q_PAD_SD3_DAT3__PCIE_CTRL_MUX_29 = IOMUX_PAD(0x06B4, 0x02CC, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__GPIO_7_7 = IOMUX_PAD(0x06B4, 0x02CC, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21 = IOMUX_PAD(0x06B4, 0x02CC, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__ANATOP_TESTI_2 = IOMUX_PAD(0x06B4, 0x02CC, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__USDHC3_RST = IOMUX_PAD(0x06B8, 0x02D0, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__UART3_CTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__UART3_RTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x092C, 5, 0), - MX6Q_PAD_SD3_RST__PCIE_CTRL_MUX_30 = IOMUX_PAD(0x06B8, 0x02D0, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__GPIO_7_8 = IOMUX_PAD(0x06B8, 0x02D0, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22 = IOMUX_PAD(0x06B8, 0x02D0, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 = IOMUX_PAD(0x06B8, 0x02D0, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__RAWNAND_CLE = IOMUX_PAD(0x06BC, 0x02D4, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__IPU2_SISG_4 = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__PCIE_CTRL_MUX_31 = IOMUX_PAD(0x06BC, 0x02D4, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__GPIO_6_7 = IOMUX_PAD(0x06BC, 0x02D4, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23 = IOMUX_PAD(0x06BC, 0x02D4, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__TPSMP_HTRANS_0 = IOMUX_PAD(0x06BC, 0x02D4, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__RAWNAND_ALE = IOMUX_PAD(0x06C0, 0x02D8, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__USDHC4_RST = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__PCIE_CTRL_MUX_0 = IOMUX_PAD(0x06C0, 0x02D8, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__GPIO_6_8 = IOMUX_PAD(0x06C0, 0x02D8, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24 = IOMUX_PAD(0x06C0, 0x02D8, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__TPSMP_HTRANS_1 = IOMUX_PAD(0x06C0, 0x02D8, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__IPU2_SISG_5 = IOMUX_PAD(0x06C4, 0x02DC, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1 = IOMUX_PAD(0x06C4, 0x02DC, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__GPIO_6_9 = IOMUX_PAD(0x06C4, 0x02DC, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32 = IOMUX_PAD(0x06C4, 0x02DC, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0 = IOMUX_PAD(0x06C4, 0x02DC, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 = IOMUX_PAD(0x06C8, 0x02E0, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN1 = IOMUX_PAD(0x06C8, 0x02E0, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__PCIE_CTRL_MUX_2 = IOMUX_PAD(0x06C8, 0x02E0, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__GPIO_6_10 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33 = IOMUX_PAD(0x06C8, 0x02E0, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__PL301_PER1_HSIZE_1 = IOMUX_PAD(0x06C8, 0x02E0, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__GPIO_6_11 = IOMUX_PAD(0x06CC, 0x02E4, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__PL301_PER1_HSIZE_2 = IOMUX_PAD(0x06CC, 0x02E4, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__USDHC4_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__USDHC3_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__PCIE_CTRL_MUX_3 = IOMUX_PAD(0x06D0, 0x02E8, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x06D0, 0x02E8, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__PL301_PER1_HRDYOUT = IOMUX_PAD(0x06D0, 0x02E8, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__IPU1_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x06D4, 0x02EC, 2, 0x0874, 1, 0), - MX6Q_PAD_NANDF_CS2__WEIM_WEIM_CRE = IOMUX_PAD(0x06D4, 0x02EC, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__CCM_CLKO2 = IOMUX_PAD(0x06D4, 0x02EC, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x06D4, 0x02EC, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__IPU2_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__IPU1_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x06D8, 0x02F0, 2, 0x0878, 1, 0), - MX6Q_PAD_NANDF_CS3__WEIM_WEIM_A_26 = IOMUX_PAD(0x06D8, 0x02F0, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__PCIE_CTRL_MUX_4 = IOMUX_PAD(0x06D8, 0x02F0, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__IPU2_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__TPSMP_CLK = IOMUX_PAD(0x06D8, 0x02F0, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x06DC, 0x02F4, 16, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__RAWNAND_RDN = IOMUX_PAD(0x06DC, 0x02F4, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__UART3_TXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__UART3_TXD_RXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0930, 2, 0), - MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5 = IOMUX_PAD(0x06DC, 0x02F4, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__GPIO_7_9 = IOMUX_PAD(0x06DC, 0x02F4, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR = IOMUX_PAD(0x06DC, 0x02F4, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x06E0, 0x02F8, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_CLK__RAWNAND_WRN = IOMUX_PAD(0x06E0, 0x02F8, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_CLK__UART3_RXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0930, 3, 0), - MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6 = IOMUX_PAD(0x06E0, 0x02F8, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_CLK__GPIO_7_10 = IOMUX_PAD(0x06E0, 0x02F8, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__RAWNAND_D0 = IOMUX_PAD(0x06E4, 0x02FC, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__USDHC1_DAT4 = IOMUX_PAD(0x06E4, 0x02FC, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0 = IOMUX_PAD(0x06E4, 0x02FC, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__GPIO_2_0 = IOMUX_PAD(0x06E4, 0x02FC, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__RAWNAND_D1 = IOMUX_PAD(0x06E8, 0x0300, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__USDHC1_DAT5 = IOMUX_PAD(0x06E8, 0x0300, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1 = IOMUX_PAD(0x06E8, 0x0300, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x06E8, 0x0300, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__RAWNAND_D2 = IOMUX_PAD(0x06EC, 0x0304, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__USDHC1_DAT6 = IOMUX_PAD(0x06EC, 0x0304, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2 = IOMUX_PAD(0x06EC, 0x0304, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x06EC, 0x0304, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__RAWNAND_D3 = IOMUX_PAD(0x06F0, 0x0308, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__USDHC1_DAT7 = IOMUX_PAD(0x06F0, 0x0308, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3 = IOMUX_PAD(0x06F0, 0x0308, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x06F0, 0x0308, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__RAWNAND_D4 = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__USDHC2_DAT4 = IOMUX_PAD(0x06F4, 0x030C, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4 = IOMUX_PAD(0x06F4, 0x030C, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x06F4, 0x030C, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__RAWNAND_D5 = IOMUX_PAD(0x06F8, 0x0310, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__USDHC2_DAT5 = IOMUX_PAD(0x06F8, 0x0310, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5 = IOMUX_PAD(0x06F8, 0x0310, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__GPIO_2_5 = IOMUX_PAD(0x06F8, 0x0310, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__RAWNAND_D6 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__USDHC2_DAT6 = IOMUX_PAD(0x06FC, 0x0314, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6 = IOMUX_PAD(0x06FC, 0x0314, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x06FC, 0x0314, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__RAWNAND_D7 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__USDHC2_DAT7 = IOMUX_PAD(0x0700, 0x0318, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7 = IOMUX_PAD(0x0700, 0x0318, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__GPIO_2_7 = IOMUX_PAD(0x0700, 0x0318, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__RAWNAND_D8 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0704, 0x031C, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__RAWNAND_DQS = IOMUX_PAD(0x0704, 0x031C, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__GPIO_2_8 = IOMUX_PAD(0x0704, 0x031C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__RAWNAND_D9 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x0708, 0x0320, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__PWM3_PWMO = IOMUX_PAD(0x0708, 0x0320, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__GPIO_2_9 = IOMUX_PAD(0x0708, 0x0320, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__RAWNAND_D10 = IOMUX_PAD(0x070C, 0x0324, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x070C, 0x0324, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__PWM4_PWMO = IOMUX_PAD(0x070C, 0x0324, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__GPIO_2_10 = IOMUX_PAD(0x070C, 0x0324, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__RAWNAND_D11 = IOMUX_PAD(0x0710, 0x0328, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0710, 0x0328, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__GPIO_2_11 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__RAWNAND_D12 = IOMUX_PAD(0x0714, 0x032C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 = IOMUX_PAD(0x0714, 0x032C, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__UART2_RXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0928, 6, 0), - MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__GPIO_2_12 = IOMUX_PAD(0x0714, 0x032C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__RAWNAND_D13 = IOMUX_PAD(0x0718, 0x0330, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__UART2_CTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__UART2_RTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0924, 4, 0), - MX6Q_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__GPIO_2_13 = IOMUX_PAD(0x0718, 0x0330, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__RAWNAND_D14 = IOMUX_PAD(0x071C, 0x0334, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 = IOMUX_PAD(0x071C, 0x0334, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__UART2_CTS = IOMUX_PAD(0x071C, 0x0334, 2, 0x0924, 5, 0), - MX6Q_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__GPIO_2_14 = IOMUX_PAD(0x071C, 0x0334, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__RAWNAND_D15 = IOMUX_PAD(0x0720, 0x0338, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 = IOMUX_PAD(0x0720, 0x0338, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__UART2_TXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__UART2_TXD_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0928, 7, 0), - MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__GPIO_2_15 = IOMUX_PAD(0x0720, 0x0338, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x0724, 0x033C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0724, 0x033C, 1, 0x0834, 1, 0), - MX6Q_PAD_SD1_DAT1__PWM3_PWMO = IOMUX_PAD(0x0724, 0x033C, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__GPT_CAPIN2 = IOMUX_PAD(0x0724, 0x033C, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__PCIE_CTRL_MUX_7 = IOMUX_PAD(0x0724, 0x033C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__GPIO_1_17 = IOMUX_PAD(0x0724, 0x033C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 = IOMUX_PAD(0x0724, 0x033C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__ANATOP_TESTO_8 = IOMUX_PAD(0x0724, 0x033C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x0728, 0x0340, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0728, 0x0340, 1, 0x082C, 1, 0), - MX6Q_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS = IOMUX_PAD(0x0728, 0x0340, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__GPT_CAPIN1 = IOMUX_PAD(0x0728, 0x0340, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__PCIE_CTRL_MUX_8 = IOMUX_PAD(0x0728, 0x0340, 4, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__GPIO_1_16 = IOMUX_PAD(0x0728, 0x0340, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 = IOMUX_PAD(0x0728, 0x0340, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__ANATOP_TESTO_7 = IOMUX_PAD(0x0728, 0x0340, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x072C, 0x0344, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__GPT_CMPOUT3 = IOMUX_PAD(0x072C, 0x0344, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__PWM1_PWMO = IOMUX_PAD(0x072C, 0x0344, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_B = IOMUX_PAD(0x072C, 0x0344, 4, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x072C, 0x0344, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x072C, 0x0344, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__ANATOP_TESTO_6 = IOMUX_PAD(0x072C, 0x0344, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0730, 0x0348, 16, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0730, 0x0348, 1, 0x0830, 0, 0), - MX6Q_PAD_SD1_CMD__PWM4_PWMO = IOMUX_PAD(0x0730, 0x0348, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x0730, 0x0348, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x0730, 0x0348, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__ANATOP_TESTO_5 = IOMUX_PAD(0x0730, 0x0348, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x0734, 0x034C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0838, 1, 0), - MX6Q_PAD_SD1_DAT2__GPT_CMPOUT2 = IOMUX_PAD(0x0734, 0x034C, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__PWM2_PWMO = IOMUX_PAD(0x0734, 0x034C, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_B = IOMUX_PAD(0x0734, 0x034C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__GPIO_1_19 = IOMUX_PAD(0x0734, 0x034C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0734, 0x034C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__ANATOP_TESTO_4 = IOMUX_PAD(0x0734, 0x034C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x0738, 0x0350, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__ECSPI5_SCLK = IOMUX_PAD(0x0738, 0x0350, 1, 0x0828, 0, 0), - MX6Q_PAD_SD1_CLK__OSC32K_32K_OUT = IOMUX_PAD(0x0738, 0x0350, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x0738, 0x0350, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__GPIO_1_20 = IOMUX_PAD(0x0738, 0x0350, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__SATA_PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 7, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x073C, 0x0354, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__ECSPI5_SCLK = IOMUX_PAD(0x073C, 0x0354, 1, 0x0828, 1, 0), - MX6Q_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x073C, 0x0354, 2, 0x08E8, 3, 0), - MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x073C, 0x0354, 3, 0x07C0, 1, 0), - MX6Q_PAD_SD2_CLK__PCIE_CTRL_MUX_9 = IOMUX_PAD(0x073C, 0x0354, 4, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__GPIO_1_10 = IOMUX_PAD(0x073C, 0x0354, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__SATA_PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 7, 0x0000, 0, 0), - MX6Q_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0740, 0x0358, 16, 0x0000, 0, 0), - MX6Q_PAD_SD2_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0740, 0x0358, 1, 0x0830, 1, 0), - MX6Q_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x0740, 0x0358, 2, 0x08F4, 2, 0), - MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x0740, 0x0358, 3, 0x07BC, 1, 0), - MX6Q_PAD_SD2_CMD__PCIE_CTRL_MUX_10 = IOMUX_PAD(0x0740, 0x0358, 4, 0x0000, 0, 0), - MX6Q_PAD_SD2_CMD__GPIO_1_11 = IOMUX_PAD(0x0740, 0x0358, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0744, 0x035C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 = IOMUX_PAD(0x0744, 0x035C, 1, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__KPP_COL_6 = IOMUX_PAD(0x0744, 0x035C, 2, 0x08EC, 2, 0), - MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x0744, 0x035C, 3, 0x07C4, 1, 0), - MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 = IOMUX_PAD(0x0744, 0x035C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__GPIO_1_12 = IOMUX_PAD(0x0744, 0x035C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__SJC_DONE = IOMUX_PAD(0x0744, 0x035C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 = IOMUX_PAD(0x0744, 0x035C, 7, 0x0000, 0, 0), -}; - -#endif /* __ASM_ARCH_MX6_MX6X_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h index 02a413f2bc..9dccb3fef5 100644 --- a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h +++ b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h @@ -24,542 +24,553 @@ /* * Hdmi controller registers */ - -/* Identification Registers */ -#define HDMI_DESIGN_ID 0x0000 -#define HDMI_REVISION_ID 0x0001 -#define HDMI_PRODUCT_ID0 0x0002 -#define HDMI_PRODUCT_ID1 0x0003 -#define HDMI_CONFIG0_ID 0x0004 -#define HDMI_CONFIG1_ID 0x0005 -#define HDMI_CONFIG2_ID 0x0006 -#define HDMI_CONFIG3_ID 0x0007 - -/* Interrupt Registers */ -#define HDMI_IH_FC_STAT0 0x0100 -#define HDMI_IH_FC_STAT1 0x0101 -#define HDMI_IH_FC_STAT2 0x0102 -#define HDMI_IH_AS_STAT0 0x0103 -#define HDMI_IH_PHY_STAT0 0x0104 -#define HDMI_IH_I2CM_STAT0 0x0105 -#define HDMI_IH_CEC_STAT0 0x0106 -#define HDMI_IH_VP_STAT0 0x0107 -#define HDMI_IH_I2CMPHY_STAT0 0x0108 -#define HDMI_IH_AHBDMAAUD_STAT0 0x0109 - -#define HDMI_IH_MUTE_FC_STAT0 0x0180 -#define HDMI_IH_MUTE_FC_STAT1 0x0181 -#define HDMI_IH_MUTE_FC_STAT2 0x0182 -#define HDMI_IH_MUTE_AS_STAT0 0x0183 -#define HDMI_IH_MUTE_PHY_STAT0 0x0184 -#define HDMI_IH_MUTE_I2CM_STAT0 0x0185 -#define HDMI_IH_MUTE_CEC_STAT0 0x0186 -#define HDMI_IH_MUTE_VP_STAT0 0x0187 -#define HDMI_IH_MUTE_I2CMPHY_STAT0 0x0188 -#define HDMI_IH_MUTE_AHBDMAAUD_STAT0 0x0189 -#define HDMI_IH_MUTE 0x01FF - -/* Video Sample Registers */ -#define HDMI_TX_INVID0 0x0200 -#define HDMI_TX_INSTUFFING 0x0201 -#define HDMI_TX_GYDATA0 0x0202 -#define HDMI_TX_GYDATA1 0x0203 -#define HDMI_TX_RCRDATA0 0x0204 -#define HDMI_TX_RCRDATA1 0x0205 -#define HDMI_TX_BCBDATA0 0x0206 -#define HDMI_TX_BCBDATA1 0x0207 - -/* Video Packetizer Registers */ -#define HDMI_VP_STATUS 0x0800 -#define HDMI_VP_PR_CD 0x0801 -#define HDMI_VP_STUFF 0x0802 -#define HDMI_VP_REMAP 0x0803 -#define HDMI_VP_CONF 0x0804 -#define HDMI_VP_STAT 0x0805 -#define HDMI_VP_INT 0x0806 -#define HDMI_VP_MASK 0x0807 -#define HDMI_VP_POL 0x0808 - -/* Frame Composer Registers */ -#define HDMI_FC_INVIDCONF 0x1000 -#define HDMI_FC_INHACTV0 0x1001 -#define HDMI_FC_INHACTV1 0x1002 -#define HDMI_FC_INHBLANK0 0x1003 -#define HDMI_FC_INHBLANK1 0x1004 -#define HDMI_FC_INVACTV0 0x1005 -#define HDMI_FC_INVACTV1 0x1006 -#define HDMI_FC_INVBLANK 0x1007 -#define HDMI_FC_HSYNCINDELAY0 0x1008 -#define HDMI_FC_HSYNCINDELAY1 0x1009 -#define HDMI_FC_HSYNCINWIDTH0 0x100A -#define HDMI_FC_HSYNCINWIDTH1 0x100B -#define HDMI_FC_VSYNCINDELAY 0x100C -#define HDMI_FC_VSYNCINWIDTH 0x100D -#define HDMI_FC_INFREQ0 0x100E -#define HDMI_FC_INFREQ1 0x100F -#define HDMI_FC_INFREQ2 0x1010 -#define HDMI_FC_CTRLDUR 0x1011 -#define HDMI_FC_EXCTRLDUR 0x1012 -#define HDMI_FC_EXCTRLSPAC 0x1013 -#define HDMI_FC_CH0PREAM 0x1014 -#define HDMI_FC_CH1PREAM 0x1015 -#define HDMI_FC_CH2PREAM 0x1016 -#define HDMI_FC_AVICONF3 0x1017 -#define HDMI_FC_GCP 0x1018 -#define HDMI_FC_AVICONF0 0x1019 -#define HDMI_FC_AVICONF1 0x101A -#define HDMI_FC_AVICONF2 0x101B -#define HDMI_FC_AVIVID 0x101C -#define HDMI_FC_AVIETB0 0x101D -#define HDMI_FC_AVIETB1 0x101E -#define HDMI_FC_AVISBB0 0x101F -#define HDMI_FC_AVISBB1 0x1020 -#define HDMI_FC_AVIELB0 0x1021 -#define HDMI_FC_AVIELB1 0x1022 -#define HDMI_FC_AVISRB0 0x1023 -#define HDMI_FC_AVISRB1 0x1024 -#define HDMI_FC_AUDICONF0 0x1025 -#define HDMI_FC_AUDICONF1 0x1026 -#define HDMI_FC_AUDICONF2 0x1027 -#define HDMI_FC_AUDICONF3 0x1028 -#define HDMI_FC_VSDIEEEID0 0x1029 -#define HDMI_FC_VSDSIZE 0x102A -#define HDMI_FC_VSDIEEEID1 0x1030 -#define HDMI_FC_VSDIEEEID2 0x1031 -#define HDMI_FC_VSDPAYLOAD0 0x1032 -#define HDMI_FC_VSDPAYLOAD1 0x1033 -#define HDMI_FC_VSDPAYLOAD2 0x1034 -#define HDMI_FC_VSDPAYLOAD3 0x1035 -#define HDMI_FC_VSDPAYLOAD4 0x1036 -#define HDMI_FC_VSDPAYLOAD5 0x1037 -#define HDMI_FC_VSDPAYLOAD6 0x1038 -#define HDMI_FC_VSDPAYLOAD7 0x1039 -#define HDMI_FC_VSDPAYLOAD8 0x103A -#define HDMI_FC_VSDPAYLOAD9 0x103B -#define HDMI_FC_VSDPAYLOAD10 0x103C -#define HDMI_FC_VSDPAYLOAD11 0x103D -#define HDMI_FC_VSDPAYLOAD12 0x103E -#define HDMI_FC_VSDPAYLOAD13 0x103F -#define HDMI_FC_VSDPAYLOAD14 0x1040 -#define HDMI_FC_VSDPAYLOAD15 0x1041 -#define HDMI_FC_VSDPAYLOAD16 0x1042 -#define HDMI_FC_VSDPAYLOAD17 0x1043 -#define HDMI_FC_VSDPAYLOAD18 0x1044 -#define HDMI_FC_VSDPAYLOAD19 0x1045 -#define HDMI_FC_VSDPAYLOAD20 0x1046 -#define HDMI_FC_VSDPAYLOAD21 0x1047 -#define HDMI_FC_VSDPAYLOAD22 0x1048 -#define HDMI_FC_VSDPAYLOAD23 0x1049 -#define HDMI_FC_SPDVENDORNAME0 0x104A -#define HDMI_FC_SPDVENDORNAME1 0x104B -#define HDMI_FC_SPDVENDORNAME2 0x104C -#define HDMI_FC_SPDVENDORNAME3 0x104D -#define HDMI_FC_SPDVENDORNAME4 0x104E -#define HDMI_FC_SPDVENDORNAME5 0x104F -#define HDMI_FC_SPDVENDORNAME6 0x1050 -#define HDMI_FC_SPDVENDORNAME7 0x1051 -#define HDMI_FC_SDPPRODUCTNAME0 0x1052 -#define HDMI_FC_SDPPRODUCTNAME1 0x1053 -#define HDMI_FC_SDPPRODUCTNAME2 0x1054 -#define HDMI_FC_SDPPRODUCTNAME3 0x1055 -#define HDMI_FC_SDPPRODUCTNAME4 0x1056 -#define HDMI_FC_SDPPRODUCTNAME5 0x1057 -#define HDMI_FC_SDPPRODUCTNAME6 0x1058 -#define HDMI_FC_SDPPRODUCTNAME7 0x1059 -#define HDMI_FC_SDPPRODUCTNAME8 0x105A -#define HDMI_FC_SDPPRODUCTNAME9 0x105B -#define HDMI_FC_SDPPRODUCTNAME10 0x105C -#define HDMI_FC_SDPPRODUCTNAME11 0x105D -#define HDMI_FC_SDPPRODUCTNAME12 0x105E -#define HDMI_FC_SDPPRODUCTNAME13 0x105F -#define HDMI_FC_SDPPRODUCTNAME14 0x1060 -#define HDMI_FC_SPDPRODUCTNAME15 0x1061 -#define HDMI_FC_SPDDEVICEINF 0x1062 -#define HDMI_FC_AUDSCONF 0x1063 -#define HDMI_FC_AUDSSTAT 0x1064 -#define HDMI_FC_DATACH0FILL 0x1070 -#define HDMI_FC_DATACH1FILL 0x1071 -#define HDMI_FC_DATACH2FILL 0x1072 -#define HDMI_FC_CTRLQHIGH 0x1073 -#define HDMI_FC_CTRLQLOW 0x1074 -#define HDMI_FC_ACP0 0x1075 -#define HDMI_FC_ACP28 0x1076 -#define HDMI_FC_ACP27 0x1077 -#define HDMI_FC_ACP26 0x1078 -#define HDMI_FC_ACP25 0x1079 -#define HDMI_FC_ACP24 0x107A -#define HDMI_FC_ACP23 0x107B -#define HDMI_FC_ACP22 0x107C -#define HDMI_FC_ACP21 0x107D -#define HDMI_FC_ACP20 0x107E -#define HDMI_FC_ACP19 0x107F -#define HDMI_FC_ACP18 0x1080 -#define HDMI_FC_ACP17 0x1081 -#define HDMI_FC_ACP16 0x1082 -#define HDMI_FC_ACP15 0x1083 -#define HDMI_FC_ACP14 0x1084 -#define HDMI_FC_ACP13 0x1085 -#define HDMI_FC_ACP12 0x1086 -#define HDMI_FC_ACP11 0x1087 -#define HDMI_FC_ACP10 0x1088 -#define HDMI_FC_ACP9 0x1089 -#define HDMI_FC_ACP8 0x108A -#define HDMI_FC_ACP7 0x108B -#define HDMI_FC_ACP6 0x108C -#define HDMI_FC_ACP5 0x108D -#define HDMI_FC_ACP4 0x108E -#define HDMI_FC_ACP3 0x108F -#define HDMI_FC_ACP2 0x1090 -#define HDMI_FC_ACP1 0x1091 -#define HDMI_FC_ISCR1_0 0x1092 -#define HDMI_FC_ISCR1_16 0x1093 -#define HDMI_FC_ISCR1_15 0x1094 -#define HDMI_FC_ISCR1_14 0x1095 -#define HDMI_FC_ISCR1_13 0x1096 -#define HDMI_FC_ISCR1_12 0x1097 -#define HDMI_FC_ISCR1_11 0x1098 -#define HDMI_FC_ISCR1_10 0x1099 -#define HDMI_FC_ISCR1_9 0x109A -#define HDMI_FC_ISCR1_8 0x109B -#define HDMI_FC_ISCR1_7 0x109C -#define HDMI_FC_ISCR1_6 0x109D -#define HDMI_FC_ISCR1_5 0x109E -#define HDMI_FC_ISCR1_4 0x109F -#define HDMI_FC_ISCR1_3 0x10A0 -#define HDMI_FC_ISCR1_2 0x10A1 -#define HDMI_FC_ISCR1_1 0x10A2 -#define HDMI_FC_ISCR2_15 0x10A3 -#define HDMI_FC_ISCR2_14 0x10A4 -#define HDMI_FC_ISCR2_13 0x10A5 -#define HDMI_FC_ISCR2_12 0x10A6 -#define HDMI_FC_ISCR2_11 0x10A7 -#define HDMI_FC_ISCR2_10 0x10A8 -#define HDMI_FC_ISCR2_9 0x10A9 -#define HDMI_FC_ISCR2_8 0x10AA -#define HDMI_FC_ISCR2_7 0x10AB -#define HDMI_FC_ISCR2_6 0x10AC -#define HDMI_FC_ISCR2_5 0x10AD -#define HDMI_FC_ISCR2_4 0x10AE -#define HDMI_FC_ISCR2_3 0x10AF -#define HDMI_FC_ISCR2_2 0x10B0 -#define HDMI_FC_ISCR2_1 0x10B1 -#define HDMI_FC_ISCR2_0 0x10B2 -#define HDMI_FC_DATAUTO0 0x10B3 -#define HDMI_FC_DATAUTO1 0x10B4 -#define HDMI_FC_DATAUTO2 0x10B5 -#define HDMI_FC_DATMAN 0x10B6 -#define HDMI_FC_DATAUTO3 0x10B7 -#define HDMI_FC_RDRB0 0x10B8 -#define HDMI_FC_RDRB1 0x10B9 -#define HDMI_FC_RDRB2 0x10BA -#define HDMI_FC_RDRB3 0x10BB -#define HDMI_FC_RDRB4 0x10BC -#define HDMI_FC_RDRB5 0x10BD -#define HDMI_FC_RDRB6 0x10BE -#define HDMI_FC_RDRB7 0x10BF -#define HDMI_FC_STAT0 0x10D0 -#define HDMI_FC_INT0 0x10D1 -#define HDMI_FC_MASK0 0x10D2 -#define HDMI_FC_POL0 0x10D3 -#define HDMI_FC_STAT1 0x10D4 -#define HDMI_FC_INT1 0x10D5 -#define HDMI_FC_MASK1 0x10D6 -#define HDMI_FC_POL1 0x10D7 -#define HDMI_FC_STAT2 0x10D8 -#define HDMI_FC_INT2 0x10D9 -#define HDMI_FC_MASK2 0x10DA -#define HDMI_FC_POL2 0x10DB -#define HDMI_FC_PRCONF 0x10E0 - -#define HDMI_FC_GMD_STAT 0x1100 -#define HDMI_FC_GMD_EN 0x1101 -#define HDMI_FC_GMD_UP 0x1102 -#define HDMI_FC_GMD_CONF 0x1103 -#define HDMI_FC_GMD_HB 0x1104 -#define HDMI_FC_GMD_PB0 0x1105 -#define HDMI_FC_GMD_PB1 0x1106 -#define HDMI_FC_GMD_PB2 0x1107 -#define HDMI_FC_GMD_PB3 0x1108 -#define HDMI_FC_GMD_PB4 0x1109 -#define HDMI_FC_GMD_PB5 0x110A -#define HDMI_FC_GMD_PB6 0x110B -#define HDMI_FC_GMD_PB7 0x110C -#define HDMI_FC_GMD_PB8 0x110D -#define HDMI_FC_GMD_PB9 0x110E -#define HDMI_FC_GMD_PB10 0x110F -#define HDMI_FC_GMD_PB11 0x1110 -#define HDMI_FC_GMD_PB12 0x1111 -#define HDMI_FC_GMD_PB13 0x1112 -#define HDMI_FC_GMD_PB14 0x1113 -#define HDMI_FC_GMD_PB15 0x1114 -#define HDMI_FC_GMD_PB16 0x1115 -#define HDMI_FC_GMD_PB17 0x1116 -#define HDMI_FC_GMD_PB18 0x1117 -#define HDMI_FC_GMD_PB19 0x1118 -#define HDMI_FC_GMD_PB20 0x1119 -#define HDMI_FC_GMD_PB21 0x111A -#define HDMI_FC_GMD_PB22 0x111B -#define HDMI_FC_GMD_PB23 0x111C -#define HDMI_FC_GMD_PB24 0x111D -#define HDMI_FC_GMD_PB25 0x111E -#define HDMI_FC_GMD_PB26 0x111F -#define HDMI_FC_GMD_PB27 0x1120 - -#define HDMI_FC_DBGFORCE 0x1200 -#define HDMI_FC_DBGAUD0CH0 0x1201 -#define HDMI_FC_DBGAUD1CH0 0x1202 -#define HDMI_FC_DBGAUD2CH0 0x1203 -#define HDMI_FC_DBGAUD0CH1 0x1204 -#define HDMI_FC_DBGAUD1CH1 0x1205 -#define HDMI_FC_DBGAUD2CH1 0x1206 -#define HDMI_FC_DBGAUD0CH2 0x1207 -#define HDMI_FC_DBGAUD1CH2 0x1208 -#define HDMI_FC_DBGAUD2CH2 0x1209 -#define HDMI_FC_DBGAUD0CH3 0x120A -#define HDMI_FC_DBGAUD1CH3 0x120B -#define HDMI_FC_DBGAUD2CH3 0x120C -#define HDMI_FC_DBGAUD0CH4 0x120D -#define HDMI_FC_DBGAUD1CH4 0x120E -#define HDMI_FC_DBGAUD2CH4 0x120F -#define HDMI_FC_DBGAUD0CH5 0x1210 -#define HDMI_FC_DBGAUD1CH5 0x1211 -#define HDMI_FC_DBGAUD2CH5 0x1212 -#define HDMI_FC_DBGAUD0CH6 0x1213 -#define HDMI_FC_DBGAUD1CH6 0x1214 -#define HDMI_FC_DBGAUD2CH6 0x1215 -#define HDMI_FC_DBGAUD0CH7 0x1216 -#define HDMI_FC_DBGAUD1CH7 0x1217 -#define HDMI_FC_DBGAUD2CH7 0x1218 -#define HDMI_FC_DBGTMDS0 0x1219 -#define HDMI_FC_DBGTMDS1 0x121A -#define HDMI_FC_DBGTMDS2 0x121B - -/* HDMI Source PHY Registers */ -#define HDMI_PHY_CONF0 0x3000 -#define HDMI_PHY_TST0 0x3001 -#define HDMI_PHY_TST1 0x3002 -#define HDMI_PHY_TST2 0x3003 -#define HDMI_PHY_STAT0 0x3004 -#define HDMI_PHY_INT0 0x3005 -#define HDMI_PHY_MASK0 0x3006 -#define HDMI_PHY_POL0 0x3007 - -/* HDMI Master PHY Registers */ -#define HDMI_PHY_I2CM_SLAVE_ADDR 0x3020 -#define HDMI_PHY_I2CM_ADDRESS_ADDR 0x3021 -#define HDMI_PHY_I2CM_DATAO_1_ADDR 0x3022 -#define HDMI_PHY_I2CM_DATAO_0_ADDR 0x3023 -#define HDMI_PHY_I2CM_DATAI_1_ADDR 0x3024 -#define HDMI_PHY_I2CM_DATAI_0_ADDR 0x3025 -#define HDMI_PHY_I2CM_OPERATION_ADDR 0x3026 -#define HDMI_PHY_I2CM_INT_ADDR 0x3027 -#define HDMI_PHY_I2CM_CTLINT_ADDR 0x3028 -#define HDMI_PHY_I2CM_DIV_ADDR 0x3029 -#define HDMI_PHY_I2CM_SOFTRSTZ_ADDR 0x302a -#define HDMI_PHY_I2CM_SS_SCL_HCNT_1_ADDR 0x302b -#define HDMI_PHY_I2CM_SS_SCL_HCNT_0_ADDR 0x302c -#define HDMI_PHY_I2CM_SS_SCL_LCNT_1_ADDR 0x302d -#define HDMI_PHY_I2CM_SS_SCL_LCNT_0_ADDR 0x302e -#define HDMI_PHY_I2CM_FS_SCL_HCNT_1_ADDR 0x302f -#define HDMI_PHY_I2CM_FS_SCL_HCNT_0_ADDR 0x3030 -#define HDMI_PHY_I2CM_FS_SCL_LCNT_1_ADDR 0x3031 -#define HDMI_PHY_I2CM_FS_SCL_LCNT_0_ADDR 0x3032 - -/* Audio Sampler Registers */ -#define HDMI_AUD_CONF0 0x3100 -#define HDMI_AUD_CONF1 0x3101 -#define HDMI_AUD_INT 0x3102 -#define HDMI_AUD_CONF2 0x3103 -#define HDMI_AUD_N1 0x3200 -#define HDMI_AUD_N2 0x3201 -#define HDMI_AUD_N3 0x3202 -#define HDMI_AUD_CTS1 0x3203 -#define HDMI_AUD_CTS2 0x3204 -#define HDMI_AUD_CTS3 0x3205 -#define HDMI_AUD_INPUTCLKFS 0x3206 -#define HDMI_AUD_SPDIFINT 0x3302 -#define HDMI_AUD_CONF0_HBR 0x3400 -#define HDMI_AUD_HBR_STATUS 0x3401 -#define HDMI_AUD_HBR_INT 0x3402 -#define HDMI_AUD_HBR_POL 0x3403 -#define HDMI_AUD_HBR_MASK 0x3404 - -/* Generic Parallel Audio Interface Registers */ -/* Not used as GPAUD interface is not enabled in hw */ -#define HDMI_GP_CONF0 0x3500 -#define HDMI_GP_CONF1 0x3501 -#define HDMI_GP_CONF2 0x3502 -#define HDMI_GP_STAT 0x3503 -#define HDMI_GP_INT 0x3504 -#define HDMI_GP_MASK 0x3505 -#define HDMI_GP_POL 0x3506 - -/* Audio DMA Registers */ -#define HDMI_AHB_DMA_CONF0 0x3600 -#define HDMI_AHB_DMA_START 0x3601 -#define HDMI_AHB_DMA_STOP 0x3602 -#define HDMI_AHB_DMA_THRSLD 0x3603 -#define HDMI_AHB_DMA_STRADDR0 0x3604 -#define HDMI_AHB_DMA_STRADDR1 0x3605 -#define HDMI_AHB_DMA_STRADDR2 0x3606 -#define HDMI_AHB_DMA_STRADDR3 0x3607 -#define HDMI_AHB_DMA_STPADDR0 0x3608 -#define HDMI_AHB_DMA_STPADDR1 0x3609 -#define HDMI_AHB_DMA_STPADDR2 0x360a -#define HDMI_AHB_DMA_STPADDR3 0x360b -#define HDMI_AHB_DMA_BSTADDR0 0x360c -#define HDMI_AHB_DMA_BSTADDR1 0x360d -#define HDMI_AHB_DMA_BSTADDR2 0x360e -#define HDMI_AHB_DMA_BSTADDR3 0x360f -#define HDMI_AHB_DMA_MBLENGTH0 0x3610 -#define HDMI_AHB_DMA_MBLENGTH1 0x3611 -#define HDMI_AHB_DMA_STAT 0x3612 -#define HDMI_AHB_DMA_INT 0x3613 -#define HDMI_AHB_DMA_MASK 0x3614 -#define HDMI_AHB_DMA_POL 0x3615 -#define HDMI_AHB_DMA_CONF1 0x3616 -#define HDMI_AHB_DMA_BUFFSTAT 0x3617 -#define HDMI_AHB_DMA_BUFFINT 0x3618 -#define HDMI_AHB_DMA_BUFFMASK 0x3619 -#define HDMI_AHB_DMA_BUFFPOL 0x361a - -/* Main Controller Registers */ -#define HDMI_MC_SFRDIV 0x4000 -#define HDMI_MC_CLKDIS 0x4001 -#define HDMI_MC_SWRSTZ 0x4002 -#define HDMI_MC_OPCTRL 0x4003 -#define HDMI_MC_FLOWCTRL 0x4004 -#define HDMI_MC_PHYRSTZ 0x4005 -#define HDMI_MC_LOCKONCLOCK 0x4006 -#define HDMI_MC_HEACPHY_RST 0x4007 - -/* Color Space Converter Registers */ -#define HDMI_CSC_CFG 0x4100 -#define HDMI_CSC_SCALE 0x4101 -#define HDMI_CSC_COEF_A1_MSB 0x4102 -#define HDMI_CSC_COEF_A1_LSB 0x4103 -#define HDMI_CSC_COEF_A2_MSB 0x4104 -#define HDMI_CSC_COEF_A2_LSB 0x4105 -#define HDMI_CSC_COEF_A3_MSB 0x4106 -#define HDMI_CSC_COEF_A3_LSB 0x4107 -#define HDMI_CSC_COEF_A4_MSB 0x4108 -#define HDMI_CSC_COEF_A4_LSB 0x4109 -#define HDMI_CSC_COEF_B1_MSB 0x410A -#define HDMI_CSC_COEF_B1_LSB 0x410B -#define HDMI_CSC_COEF_B2_MSB 0x410C -#define HDMI_CSC_COEF_B2_LSB 0x410D -#define HDMI_CSC_COEF_B3_MSB 0x410E -#define HDMI_CSC_COEF_B3_LSB 0x410F -#define HDMI_CSC_COEF_B4_MSB 0x4110 -#define HDMI_CSC_COEF_B4_LSB 0x4111 -#define HDMI_CSC_COEF_C1_MSB 0x4112 -#define HDMI_CSC_COEF_C1_LSB 0x4113 -#define HDMI_CSC_COEF_C2_MSB 0x4114 -#define HDMI_CSC_COEF_C2_LSB 0x4115 -#define HDMI_CSC_COEF_C3_MSB 0x4116 -#define HDMI_CSC_COEF_C3_LSB 0x4117 -#define HDMI_CSC_COEF_C4_MSB 0x4118 -#define HDMI_CSC_COEF_C4_LSB 0x4119 - -/* HDCP Encryption Engine Registers */ -#define HDMI_A_HDCPCFG0 0x5000 -#define HDMI_A_HDCPCFG1 0x5001 -#define HDMI_A_HDCPOBS0 0x5002 -#define HDMI_A_HDCPOBS1 0x5003 -#define HDMI_A_HDCPOBS2 0x5004 -#define HDMI_A_HDCPOBS3 0x5005 -#define HDMI_A_APIINTCLR 0x5006 -#define HDMI_A_APIINTSTAT 0x5007 -#define HDMI_A_APIINTMSK 0x5008 -#define HDMI_A_VIDPOLCFG 0x5009 -#define HDMI_A_OESSWCFG 0x500A -#define HDMI_A_TIMER1SETUP0 0x500B -#define HDMI_A_TIMER1SETUP1 0x500C -#define HDMI_A_TIMER2SETUP0 0x500D -#define HDMI_A_TIMER2SETUP1 0x500E -#define HDMI_A_100MSCFG 0x500F -#define HDMI_A_2SCFG0 0x5010 -#define HDMI_A_2SCFG1 0x5011 -#define HDMI_A_5SCFG0 0x5012 -#define HDMI_A_5SCFG1 0x5013 -#define HDMI_A_SRMVERLSB 0x5014 -#define HDMI_A_SRMVERMSB 0x5015 -#define HDMI_A_SRMCTRL 0x5016 -#define HDMI_A_SFRSETUP 0x5017 -#define HDMI_A_I2CHSETUP 0x5018 -#define HDMI_A_INTSETUP 0x5019 -#define HDMI_A_PRESETUP 0x501A -#define HDMI_A_SRM_BASE 0x5020 - -/* CEC Engine Registers */ -#define HDMI_CEC_CTRL 0x7D00 -#define HDMI_CEC_STAT 0x7D01 -#define HDMI_CEC_MASK 0x7D02 -#define HDMI_CEC_POLARITY 0x7D03 -#define HDMI_CEC_INT 0x7D04 -#define HDMI_CEC_ADDR_L 0x7D05 -#define HDMI_CEC_ADDR_H 0x7D06 -#define HDMI_CEC_TX_CNT 0x7D07 -#define HDMI_CEC_RX_CNT 0x7D08 -#define HDMI_CEC_TX_DATA0 0x7D10 -#define HDMI_CEC_TX_DATA1 0x7D11 -#define HDMI_CEC_TX_DATA2 0x7D12 -#define HDMI_CEC_TX_DATA3 0x7D13 -#define HDMI_CEC_TX_DATA4 0x7D14 -#define HDMI_CEC_TX_DATA5 0x7D15 -#define HDMI_CEC_TX_DATA6 0x7D16 -#define HDMI_CEC_TX_DATA7 0x7D17 -#define HDMI_CEC_TX_DATA8 0x7D18 -#define HDMI_CEC_TX_DATA9 0x7D19 -#define HDMI_CEC_TX_DATA10 0x7D1a -#define HDMI_CEC_TX_DATA11 0x7D1b -#define HDMI_CEC_TX_DATA12 0x7D1c -#define HDMI_CEC_TX_DATA13 0x7D1d -#define HDMI_CEC_TX_DATA14 0x7D1e -#define HDMI_CEC_TX_DATA15 0x7D1f -#define HDMI_CEC_RX_DATA0 0x7D20 -#define HDMI_CEC_RX_DATA1 0x7D21 -#define HDMI_CEC_RX_DATA2 0x7D22 -#define HDMI_CEC_RX_DATA3 0x7D23 -#define HDMI_CEC_RX_DATA4 0x7D24 -#define HDMI_CEC_RX_DATA5 0x7D25 -#define HDMI_CEC_RX_DATA6 0x7D26 -#define HDMI_CEC_RX_DATA7 0x7D27 -#define HDMI_CEC_RX_DATA8 0x7D28 -#define HDMI_CEC_RX_DATA9 0x7D29 -#define HDMI_CEC_RX_DATA10 0x7D2a -#define HDMI_CEC_RX_DATA11 0x7D2b -#define HDMI_CEC_RX_DATA12 0x7D2c -#define HDMI_CEC_RX_DATA13 0x7D2d -#define HDMI_CEC_RX_DATA14 0x7D2e -#define HDMI_CEC_RX_DATA15 0x7D2f -#define HDMI_CEC_LOCK 0x7D30 -#define HDMI_CEC_WKUPCTRL 0x7D31 - -/* I2C Master Registers (E-DDC) */ -#define HDMI_I2CM_SLAVE 0x7E00 -#define HDMI_I2CMESS 0x7E01 -#define HDMI_I2CM_DATAO 0x7E02 -#define HDMI_I2CM_DATAI 0x7E03 -#define HDMI_I2CM_OPERATION 0x7E04 -#define HDMI_I2CM_INT 0x7E05 -#define HDMI_I2CM_CTLINT 0x7E06 -#define HDMI_I2CM_DIV 0x7E07 -#define HDMI_I2CM_SEGADDR 0x7E08 -#define HDMI_I2CM_SOFTRSTZ 0x7E09 -#define HDMI_I2CM_SEGPTR 0x7E0A -#define HDMI_I2CM_SS_SCL_HCNT_1_ADDR 0x7E0B -#define HDMI_I2CM_SS_SCL_HCNT_0_ADDR 0x7E0C -#define HDMI_I2CM_SS_SCL_LCNT_1_ADDR 0x7E0D -#define HDMI_I2CM_SS_SCL_LCNT_0_ADDR 0x7E0E -#define HDMI_I2CM_FS_SCL_HCNT_1_ADDR 0x7E0F -#define HDMI_I2CM_FS_SCL_HCNT_0_ADDR 0x7E10 -#define HDMI_I2CM_FS_SCL_LCNT_1_ADDR 0x7E11 -#define HDMI_I2CM_FS_SCL_LCNT_0_ADDR 0x7E12 - -/* Random Number Generator Registers (RNG) */ -#define HDMI_RNG_BASE 0x8000 - +struct hdmi_regs { + /*Identification Registers */ + u8 design_id; /* 0x000 */ + u8 revision_id; /* 0x001 */ + u8 product_id0; /* 0x002 */ + u8 product_id1; /* 0x003 */ + u8 config0_id; /* 0x004 */ + u8 config1_id; /* 0x005 */ + u8 config2_id; /* 0x006 */ + u8 config3_id; /* 0x007 */ + u8 reserved1[0xf8]; + /* Interrupt Registers */ + u8 ih_fc_stat0; /* 0x100 */ + u8 ih_fc_stat1; /* 0x101 */ + u8 ih_fc_stat2; /* 0x102 */ + u8 ih_as_stat0; /* 0x103 */ + u8 ih_phy_stat0; /* 0x104 */ + u8 ih_i2cm_stat0; /* 0x105 */ + u8 ih_cec_stat0; /* 0x106 */ + u8 ih_vp_stat0; /* 0x107 */ + u8 ih_i2cmphy_stat0; /* 0x108 */ + u8 ih_ahbdmaaud_stat0; /* 0x109 */ + u8 reserved2[0x76]; + u8 ih_mute_fc_stat0; /* 0x180 */ + u8 ih_mute_fc_stat1; /* 0x181 */ + u8 ih_mute_fc_stat2; /* 0x182 */ + u8 ih_mute_as_stat0; /* 0x183 */ + u8 ih_mute_phy_stat0; /* 0x184 */ + u8 ih_mute_i2cm_stat0; /* 0x185 */ + u8 ih_mute_cec_stat0; /* 0x186 */ + u8 ih_mute_vp_stat0; /* 0x187 */ + u8 ih_mute_i2cmphy_stat0; /* 0x188 */ + u8 ih_mute_ahbdmaaud_stat0; /* 0x189 */ + u8 reserved3[0x75]; + u8 ih_mute; /* 0x1ff */ + /* Video Sample Registers */ + u8 tx_invid0; /* 0x200 */ + u8 tx_instuffing; /* 0x201 */ + u8 tx_gydata0; /* 0x202 */ + u8 tx_gydata1; /* 0x203 */ + u8 tx_rcrdata0; /* 0x204 */ + u8 tx_rcrdata1; /* 0x205 */ + u8 tx_bcbdata0; /* 0x206 */ + u8 tx_bcbdata1; /* 0x207 */ + u8 reserved4[0x5f8]; + /* Video Packetizer Registers */ + u8 vp_status; /* 0x800 */ + u8 vp_pr_cd; /* 0x801 */ + u8 vp_stuff; /* 0x802 */ + u8 vp_remap; /* 0x803 */ + u8 vp_conf; /* 0x804 */ + u8 vp_stat; /* 0x805 */ + u8 vp_int; /* 0x806 */ + u8 vp_mask; /* 0x807 */ + u8 vp_pol; /* 0x808 */ + u8 reserved5[0x7f7]; + /* Frame Composer Registers */ + u8 fc_invidconf; /* 0x1000 */ + u8 fc_inhactv0; /* 0x1001 */ + u8 fc_inhactv1; /* 0x1002 */ + u8 fc_inhblank0; /* 0x1003 */ + u8 fc_inhblank1; /* 0x1004 */ + u8 fc_invactv0; /* 0x1005 */ + u8 fc_invactv1; /* 0x1006 */ + u8 fc_invblank; /* 0x1007 */ + u8 fc_hsyncindelay0; /* 0x1008 */ + u8 fc_hsyncindelay1; /* 0x1009 */ + u8 fc_hsyncinwidth0; /* 0x100a */ + u8 fc_hsyncinwidth1; /* 0x100b */ + u8 fc_vsyncindelay; /* 0x100c */ + u8 fc_vsyncinwidth; /* 0x100d */ + u8 fc_infreq0; /* 0x100e */ + u8 fc_infreq1; /* 0x100f */ + u8 fc_infreq2; /* 0x1010 */ + u8 fc_ctrldur; /* 0x1011 */ + u8 fc_exctrldur; /* 0x1012 */ + u8 fc_exctrlspac; /* 0x1013 */ + u8 fc_ch0pream; /* 0x1014 */ + u8 fc_ch1pream; /* 0x1015 */ + u8 fc_ch2pream; /* 0x1016 */ + u8 fc_aviconf3; /* 0x1017 */ + u8 fc_gcp; /* 0x1018 */ + u8 fc_aviconf0; /* 0x1019 */ + u8 fc_aviconf1; /* 0x101a */ + u8 fc_aviconf2; /* 0x101b */ + u8 fc_avivid; /* 0x101c */ + u8 fc_avietb0; /* 0x101d */ + u8 fc_avietb1; /* 0x101e */ + u8 fc_avisbb0; /* 0x101f */ + u8 fc_avisbb1; /* 0x1020 */ + u8 fc_avielb0; /* 0x1021 */ + u8 fc_avielb1; /* 0x1022 */ + u8 fc_avisrb0; /* 0x1023 */ + u8 fc_avisrb1; /* 0x1024 */ + u8 fc_audiconf0; /* 0x1025 */ + u8 fc_audiconf1; /* 0x1026 */ + u8 fc_audiconf2; /* 0x1027 */ + u8 fc_audiconf3; /* 0x1028 */ + u8 fc_vsdieeeid0; /* 0x1029 */ + u8 fc_vsdsize; /* 0x102a */ + u8 reserved6[5]; + u8 fc_vsdieeeid1; /* 0x1030 */ + u8 fc_vsdieeeid2; /* 0x1031 */ + u8 fc_vsdpayload0; /* 0x1032 */ + u8 fc_vsdpayload1; /* 0x1033 */ + u8 fc_vsdpayload2; /* 0x1034 */ + u8 fc_vsdpayload3; /* 0x1035 */ + u8 fc_vsdpayload4; /* 0x1036 */ + u8 fc_vsdpayload5; /* 0x1037 */ + u8 fc_vsdpayload6; /* 0x1038 */ + u8 fc_vsdpayload7; /* 0x1039 */ + u8 fc_vsdpayload8; /* 0x103a */ + u8 fc_vsdpayload9; /* 0x103b */ + u8 fc_vsdpayload10; /* 0x103c */ + u8 fc_vsdpayload11; /* 0x103d */ + u8 fc_vsdpayload12; /* 0x103e */ + u8 fc_vsdpayload13; /* 0x103f */ + u8 fc_vsdpayload14; /* 0x1040 */ + u8 fc_vsdpayload15; /* 0x1041 */ + u8 fc_vsdpayload16; /* 0x1042 */ + u8 fc_vsdpayload17; /* 0x1043 */ + u8 fc_vsdpayload18; /* 0x1044 */ + u8 fc_vsdpayload19; /* 0x1045 */ + u8 fc_vsdpayload20; /* 0x1046 */ + u8 fc_vsdpayload21; /* 0x1047 */ + u8 fc_vsdpayload22; /* 0x1048 */ + u8 fc_vsdpayload23; /* 0x1049 */ + u8 fc_spdvendorname0; /* 0x104a */ + u8 fc_spdvendorname1; /* 0x104b */ + u8 fc_spdvendorname2; /* 0x104c */ + u8 fc_spdvendorname3; /* 0x104d */ + u8 fc_spdvendorname4; /* 0x104e */ + u8 fc_spdvendorname5; /* 0x104f */ + u8 fc_spdvendorname6; /* 0x1050 */ + u8 fc_spdvendorname7; /* 0x1051 */ + u8 fc_sdpproductname0; /* 0x1052 */ + u8 fc_sdpproductname1; /* 0x1053 */ + u8 fc_sdpproductname2; /* 0x1054 */ + u8 fc_sdpproductname3; /* 0x1055 */ + u8 fc_sdpproductname4; /* 0x1056 */ + u8 fc_sdpproductname5; /* 0x1057 */ + u8 fc_sdpproductname6; /* 0x1058 */ + u8 fc_sdpproductname7; /* 0x1059 */ + u8 fc_sdpproductname8; /* 0x105a */ + u8 fc_sdpproductname9; /* 0x105b */ + u8 fc_sdpproductname10; /* 0x105c */ + u8 fc_sdpproductname11; /* 0x105d */ + u8 fc_sdpproductname12; /* 0x105e */ + u8 fc_sdpproductname13; /* 0x105f */ + u8 fc_sdpproductname14; /* 0x1060 */ + u8 fc_spdproductname15; /* 0x1061 */ + u8 fc_spddeviceinf; /* 0x1062 */ + u8 fc_audsconf; /* 0x1063 */ + u8 fc_audsstat; /* 0x1064 */ + u8 reserved7[0xb]; + u8 fc_datach0fill; /* 0x1070 */ + u8 fc_datach1fill; /* 0x1071 */ + u8 fc_datach2fill; /* 0x1072 */ + u8 fc_ctrlqhigh; /* 0x1073 */ + u8 fc_ctrlqlow; /* 0x1074 */ + u8 fc_acp0; /* 0x1075 */ + u8 fc_acp28; /* 0x1076 */ + u8 fc_acp27; /* 0x1077 */ + u8 fc_acp26; /* 0x1078 */ + u8 fc_acp25; /* 0x1079 */ + u8 fc_acp24; /* 0x107a */ + u8 fc_acp23; /* 0x107b */ + u8 fc_acp22; /* 0x107c */ + u8 fc_acp21; /* 0x107d */ + u8 fc_acp20; /* 0x107e */ + u8 fc_acp19; /* 0x107f */ + u8 fc_acp18; /* 0x1080 */ + u8 fc_acp17; /* 0x1081 */ + u8 fc_acp16; /* 0x1082 */ + u8 fc_acp15; /* 0x1083 */ + u8 fc_acp14; /* 0x1084 */ + u8 fc_acp13; /* 0x1085 */ + u8 fc_acp12; /* 0x1086 */ + u8 fc_acp11; /* 0x1087 */ + u8 fc_acp10; /* 0x1088 */ + u8 fc_acp9; /* 0x1089 */ + u8 fc_acp8; /* 0x108a */ + u8 fc_acp7; /* 0x108b */ + u8 fc_acp6; /* 0x108c */ + u8 fc_acp5; /* 0x108d */ + u8 fc_acp4; /* 0x108e */ + u8 fc_acp3; /* 0x108f */ + u8 fc_acp2; /* 0x1090 */ + u8 fc_acp1; /* 0x1091 */ + u8 fc_iscr1_0; /* 0x1092 */ + u8 fc_iscr1_16; /* 0x1093 */ + u8 fc_iscr1_15; /* 0x1094 */ + u8 fc_iscr1_14; /* 0x1095 */ + u8 fc_iscr1_13; /* 0x1096 */ + u8 fc_iscr1_12; /* 0x1097 */ + u8 fc_iscr1_11; /* 0x1098 */ + u8 fc_iscr1_10; /* 0x1099 */ + u8 fc_iscr1_9; /* 0x109a */ + u8 fc_iscr1_8; /* 0x109b */ + u8 fc_iscr1_7; /* 0x109c */ + u8 fc_iscr1_6; /* 0x109d */ + u8 fc_iscr1_5; /* 0x109e */ + u8 fc_iscr1_4; /* 0x109f */ + u8 fc_iscr1_3; /* 0x10a0 */ + u8 fc_iscr1_2; /* 0x10a1 */ + u8 fc_iscr1_1; /* 0x10a2 */ + u8 fc_iscr2_15; /* 0x10a3 */ + u8 fc_iscr2_14; /* 0x10a4 */ + u8 fc_iscr2_13; /* 0x10a5 */ + u8 fc_iscr2_12; /* 0x10a6 */ + u8 fc_iscr2_11; /* 0x10a7 */ + u8 fc_iscr2_10; /* 0x10a8 */ + u8 fc_iscr2_9; /* 0x10a9 */ + u8 fc_iscr2_8; /* 0x10aa */ + u8 fc_iscr2_7; /* 0x10ab */ + u8 fc_iscr2_6; /* 0x10ac */ + u8 fc_iscr2_5; /* 0x10ad */ + u8 fc_iscr2_4; /* 0x10ae */ + u8 fc_iscr2_3; /* 0x10af */ + u8 fc_iscr2_2; /* 0x10b0 */ + u8 fc_iscr2_1; /* 0x10b1 */ + u8 fc_iscr2_0; /* 0x10b2 */ + u8 fc_datauto0; /* 0x10b3 */ + u8 fc_datauto1; /* 0x10b4 */ + u8 fc_datauto2; /* 0x10b5 */ + u8 fc_datman; /* 0x10b6 */ + u8 fc_datauto3; /* 0x10b7 */ + u8 fc_rdrb0; /* 0x10b8 */ + u8 fc_rdrb1; /* 0x10b9 */ + u8 fc_rdrb2; /* 0x10ba */ + u8 fc_rdrb3; /* 0x10bb */ + u8 fc_rdrb4; /* 0x10bc */ + u8 fc_rdrb5; /* 0x10bd */ + u8 fc_rdrb6; /* 0x10be */ + u8 fc_rdrb7; /* 0x10bf */ + u8 reserved8[0x10]; + u8 fc_stat0; /* 0x10d0 */ + u8 fc_int0; /* 0x10d1 */ + u8 fc_mask0; /* 0x10d2 */ + u8 fc_pol0; /* 0x10d3 */ + u8 fc_stat1; /* 0x10d4 */ + u8 fc_int1; /* 0x10d5 */ + u8 fc_mask1; /* 0x10d6 */ + u8 fc_pol1; /* 0x10d7 */ + u8 fc_stat2; /* 0x10d8 */ + u8 fc_int2; /* 0x10d9 */ + u8 fc_mask2; /* 0x10da */ + u8 fc_pol2; /* 0x10db */ + u8 reserved9[0x4]; + u8 fc_prconf; /* 0x10e0 */ + u8 reserved10[0x1f]; + u8 fc_gmd_stat; /* 0x1100 */ + u8 fc_gmd_en; /* 0x1101 */ + u8 fc_gmd_up; /* 0x1102 */ + u8 fc_gmd_conf; /* 0x1103 */ + u8 fc_gmd_hb; /* 0x1104 */ + u8 fc_gmd_pb0; /* 0x1105 */ + u8 fc_gmd_pb1; /* 0x1106 */ + u8 fc_gmd_pb2; /* 0x1107 */ + u8 fc_gmd_pb3; /* 0x1108 */ + u8 fc_gmd_pb4; /* 0x1109 */ + u8 fc_gmd_pb5; /* 0x110a */ + u8 fc_gmd_pb6; /* 0x110b */ + u8 fc_gmd_pb7; /* 0x110c */ + u8 fc_gmd_pb8; /* 0x110d */ + u8 fc_gmd_pb9; /* 0x110e */ + u8 fc_gmd_pb10; /* 0x110f */ + u8 fc_gmd_pb11; /* 0x1110 */ + u8 fc_gmd_pb12; /* 0x1111 */ + u8 fc_gmd_pb13; /* 0x1112 */ + u8 fc_gmd_pb14; /* 0x1113 */ + u8 fc_gmd_pb15; /* 0x1114 */ + u8 fc_gmd_pb16; /* 0x1115 */ + u8 fc_gmd_pb17; /* 0x1116 */ + u8 fc_gmd_pb18; /* 0x1117 */ + u8 fc_gmd_pb19; /* 0x1118 */ + u8 fc_gmd_pb20; /* 0x1119 */ + u8 fc_gmd_pb21; /* 0x111a */ + u8 fc_gmd_pb22; /* 0x111b */ + u8 fc_gmd_pb23; /* 0x111c */ + u8 fc_gmd_pb24; /* 0x111d */ + u8 fc_gmd_pb25; /* 0x111e */ + u8 fc_gmd_pb26; /* 0x111f */ + u8 fc_gmd_pb27; /* 0x1120 */ + u8 reserved11[0xdf]; + u8 fc_dbgforce; /* 0x1200 */ + u8 fc_dbgaud0ch0; /* 0x1201 */ + u8 fc_dbgaud1ch0; /* 0x1202 */ + u8 fc_dbgaud2ch0; /* 0x1203 */ + u8 fc_dbgaud0ch1; /* 0x1204 */ + u8 fc_dbgaud1ch1; /* 0x1205 */ + u8 fc_dbgaud2ch1; /* 0x1206 */ + u8 fc_dbgaud0ch2; /* 0x1207 */ + u8 fc_dbgaud1ch2; /* 0x1208 */ + u8 fc_dbgaud2ch2; /* 0x1209 */ + u8 fc_dbgaud0ch3; /* 0x120a */ + u8 fc_dbgaud1ch3; /* 0x120b */ + u8 fc_dbgaud2ch3; /* 0x120c */ + u8 fc_dbgaud0ch4; /* 0x120d */ + u8 fc_dbgaud1ch4; /* 0x120e */ + u8 fc_dbgaud2ch4; /* 0x120f */ + u8 fc_dbgaud0ch5; /* 0x1210 */ + u8 fc_dbgaud1ch5; /* 0x1211 */ + u8 fc_dbgaud2ch5; /* 0x1212 */ + u8 fc_dbgaud0ch6; /* 0x1213 */ + u8 fc_dbgaud1ch6; /* 0x1214 */ + u8 fc_dbgaud2ch6; /* 0x1215 */ + u8 fc_dbgaud0ch7; /* 0x1216 */ + u8 fc_dbgaud1ch7; /* 0x1217 */ + u8 fc_dbgaud2ch7; /* 0x1218 */ + u8 fc_dbgtmds0; /* 0x1219 */ + u8 fc_dbgtmds1; /* 0x121a */ + u8 fc_dbgtmds2; /* 0x121b */ + u8 reserved12[0x1de4]; + /* Hdmi Source Phy Registers */ + u8 phy_conf0; /* 0x3000 */ + u8 phy_tst0; /* 0x3001 */ + u8 phy_tst1; /* 0x3002 */ + u8 phy_tst2; /* 0x3003 */ + u8 phy_stat0; /* 0x3004 */ + u8 phy_int0; /* 0x3005 */ + u8 phy_mask0; /* 0x3006 */ + u8 phy_pol0; /* 0x3007 */ + u8 reserved13[0x18]; + /* Hdmi Master Phy Registers */ + u8 phy_i2cm_slave_addr; /* 0x3020 */ + u8 phy_i2cm_address_addr; /* 0x3021 */ + u8 phy_i2cm_datao_1_addr; /* 0x3022 */ + u8 phy_i2cm_datao_0_addr; /* 0x3023 */ + u8 phy_i2cm_datai_1_addr; /* 0x3024 */ + u8 phy_i2cm_datai_0_addr; /* 0x3025 */ + u8 phy_i2cm_operation_addr; /* 0x3026 */ + u8 phy_i2cm_int_addr; /* 0x3027 */ + u8 phy_i2cm_ctlint_addr; /* 0x3028 */ + u8 phy_i2cm_div_addr; /* 0x3029 */ + u8 phy_i2cm_softrstz_addr; /* 0x302a */ + u8 phy_i2cm_ss_scl_hcnt_1_addr; /* 0x302b */ + u8 phy_i2cm_ss_scl_hcnt_0_addr; /* 0x302c */ + u8 phy_i2cm_ss_scl_lcnt_1_addr; /* 0x302d */ + u8 phy_i2cm_ss_scl_lcnt_0_addr; /* 0x302e */ + u8 phy_i2cm_fs_scl_hcnt_1_addr; /* 0x302f */ + u8 phy_i2cm_fs_scl_hcnt_0_addr; /* 0x3030 */ + u8 phy_i2cm_fs_scl_lcnt_1_addr; /* 0x3031 */ + u8 phy_i2cm_fs_scl_lcnt_0_addr; /* 0x3032 */ + u8 reserved14[0xcd]; + /* Audio Sampler Registers */ + u8 aud_conf0; /* 0x3100 */ + u8 aud_conf1; /* 0x3101 */ + u8 aud_int; /* 0x3102 */ + u8 aud_conf2; /* 0x3103 */ + u8 reserved15[0xfc]; + u8 aud_n1; /* 0x3200 */ + u8 aud_n2; /* 0x3201 */ + u8 aud_n3; /* 0x3202 */ + u8 aud_cts1; /* 0x3203 */ + u8 aud_cts2; /* 0x3204 */ + u8 aud_cts3; /* 0x3205 */ + u8 aud_inputclkfs; /* 0x3206 */ + u8 reserved16[0xfb]; + u8 aud_spdifint; /* 0x3302 */ + u8 reserved17[0xfd]; + u8 aud_conf0_hbr; /* 0x3400 */ + u8 aud_hbr_status; /* 0x3401 */ + u8 aud_hbr_int; /* 0x3402 */ + u8 aud_hbr_pol; /* 0x3403 */ + u8 aud_hbr_mask; /* 0x3404 */ + u8 reserved18[0xfb]; + /* + * Generic Parallel Audio Interface Registers + * Not used as GPAUD interface is not enabled in hw + */ + u8 gp_conf0; /* 0x3500 */ + u8 gp_conf1; /* 0x3501 */ + u8 gp_conf2; /* 0x3502 */ + u8 gp_stat; /* 0x3503 */ + u8 gp_int; /* 0x3504 */ + u8 gp_mask; /* 0x3505 */ + u8 gp_pol; /* 0x3506 */ + u8 reserved19[0xf9]; + /* Audio DMA Registers */ + u8 ahb_dma_conf0; /* 0x3600 */ + u8 ahb_dma_start; /* 0x3601 */ + u8 ahb_dma_stop; /* 0x3602 */ + u8 ahb_dma_thrsld; /* 0x3603 */ + u8 ahb_dma_straddr0; /* 0x3604 */ + u8 ahb_dma_straddr1; /* 0x3605 */ + u8 ahb_dma_straddr2; /* 0x3606 */ + u8 ahb_dma_straddr3; /* 0x3607 */ + u8 ahb_dma_stpaddr0; /* 0x3608 */ + u8 ahb_dma_stpaddr1; /* 0x3609 */ + u8 ahb_dma_stpaddr2; /* 0x360a */ + u8 ahb_dma_stpaddr3; /* 0x360b */ + u8 ahb_dma_bstaddr0; /* 0x360c */ + u8 ahb_dma_bstaddr1; /* 0x360d */ + u8 ahb_dma_bstaddr2; /* 0x360e */ + u8 ahb_dma_bstaddr3; /* 0x360f */ + u8 ahb_dma_mblength0; /* 0x3610 */ + u8 ahb_dma_mblength1; /* 0x3611 */ + u8 ahb_dma_stat; /* 0x3612 */ + u8 ahb_dma_int; /* 0x3613 */ + u8 ahb_dma_mask; /* 0x3614 */ + u8 ahb_dma_pol; /* 0x3615 */ + u8 ahb_dma_conf1; /* 0x3616 */ + u8 ahb_dma_buffstat; /* 0x3617 */ + u8 ahb_dma_buffint; /* 0x3618 */ + u8 ahb_dma_buffmask; /* 0x3619 */ + u8 ahb_dma_buffpol; /* 0x361a */ + u8 reserved20[0x9e5]; + /* Main Controller Registers */ + u8 mc_sfrdiv; /* 0x4000 */ + u8 mc_clkdis; /* 0x4001 */ + u8 mc_swrstz; /* 0x4002 */ + u8 mc_opctrl; /* 0x4003 */ + u8 mc_flowctrl; /* 0x4004 */ + u8 mc_phyrstz; /* 0x4005 */ + u8 mc_lockonclock; /* 0x4006 */ + u8 mc_heacphy_rst; /* 0x4007 */ + u8 reserved21[0xf8]; + /* Colorspace Converter Registers */ + u8 csc_cfg; /* 0x4100 */ + u8 csc_scale; /* 0x4101 */ + u8 csc_coef_a1_msb; /* 0x4102 */ + u8 csc_coef_a1_lsb; /* 0x4103 */ + u8 csc_coef_a2_msb; /* 0x4104 */ + u8 csc_coef_a2_lsb; /* 0x4105 */ + u8 csc_coef_a3_msb; /* 0x4106 */ + u8 csc_coef_a3_lsb; /* 0x4107 */ + u8 csc_coef_a4_msb; /* 0x4108 */ + u8 csc_coef_a4_lsb; /* 0x4109 */ + u8 csc_coef_b1_msb; /* 0x410a */ + u8 csc_coef_b1_lsb; /* 0x410b */ + u8 csc_coef_b2_msb; /* 0x410c */ + u8 csc_coef_b2_lsb; /* 0x410d */ + u8 csc_coef_b3_msb; /* 0x410e */ + u8 csc_coef_b3_lsb; /* 0x410f */ + u8 csc_coef_b4_msb; /* 0x4110 */ + u8 csc_coef_b4_lsb; /* 0x4111 */ + u8 csc_coef_c1_msb; /* 0x4112 */ + u8 csc_coef_c1_lsb; /* 0x4113 */ + u8 csc_coef_c2_msb; /* 0x4114 */ + u8 csc_coef_c2_lsb; /* 0x4115 */ + u8 csc_coef_c3_msb; /* 0x4116 */ + u8 csc_coef_c3_lsb; /* 0x4117 */ + u8 csc_coef_c4_msb; /* 0x4118 */ + u8 csc_coef_c4_lsb; /* 0x4119 */ + u8 reserved22[0xee6]; + /* HDCP Encryption Engine Registers */ + u8 a_hdcpcfg0; /* 0x5000 */ + u8 a_hdcpcfg1; /* 0x5001 */ + u8 a_hdcpobs0; /* 0x5002 */ + u8 a_hdcpobs1; /* 0x5003 */ + u8 a_hdcpobs2; /* 0x5004 */ + u8 a_hdcpobs3; /* 0x5005 */ + u8 a_apiintclr; /* 0x5006 */ + u8 a_apiintstat; /* 0x5007 */ + u8 a_apiintmsk; /* 0x5008 */ + u8 a_vidpolcfg; /* 0x5009 */ + u8 a_oesswcfg; /* 0x500a */ + u8 a_timer1setup0; /* 0x500b */ + u8 a_timer1setup1; /* 0x500c */ + u8 a_timer2setup0; /* 0x500d */ + u8 a_timer2setup1; /* 0x500e */ + u8 a_100mscfg; /* 0x500f */ + u8 a_2scfg0; /* 0x5010 */ + u8 a_2scfg1; /* 0x5011 */ + u8 a_5scfg0; /* 0x5012 */ + u8 a_5scfg1; /* 0x5013 */ + u8 a_srmverlsb; /* 0x5014 */ + u8 a_srmvermsb; /* 0x5015 */ + u8 a_srmctrl; /* 0x5016 */ + u8 a_sfrsetup; /* 0x5017 */ + u8 a_i2chsetup; /* 0x5018 */ + u8 a_intsetup; /* 0x5019 */ + u8 a_presetup; /* 0x501a */ + u8 reserved23[0x5]; + u8 a_srm_base; /* 0x5020 */ + u8 reserved24[0x2cdf]; + /* CEC Engine Registers */ + u8 cec_ctrl; /* 0x7d00 */ + u8 cec_stat; /* 0x7d01 */ + u8 cec_mask; /* 0x7d02 */ + u8 cec_polarity; /* 0x7d03 */ + u8 cec_int; /* 0x7d04 */ + u8 cec_addr_l; /* 0x7d05 */ + u8 cec_addr_h; /* 0x7d06 */ + u8 cec_tx_cnt; /* 0x7d07 */ + u8 cec_rx_cnt; /* 0x7d08 */ + u8 reserved25[0x7]; + u8 cec_tx_data0; /* 0x7d10 */ + u8 cec_tx_data1; /* 0x7d11 */ + u8 cec_tx_data2; /* 0x7d12 */ + u8 cec_tx_data3; /* 0x7d13 */ + u8 cec_tx_data4; /* 0x7d14 */ + u8 cec_tx_data5; /* 0x7d15 */ + u8 cec_tx_data6; /* 0x7d16 */ + u8 cec_tx_data7; /* 0x7d17 */ + u8 cec_tx_data8; /* 0x7d18 */ + u8 cec_tx_data9; /* 0x7d19 */ + u8 cec_tx_data10; /* 0x7d1a */ + u8 cec_tx_data11; /* 0x7d1b */ + u8 cec_tx_data12; /* 0x7d1c */ + u8 cec_tx_data13; /* 0x7d1d */ + u8 cec_tx_data14; /* 0x7d1e */ + u8 cec_tx_data15; /* 0x7d1f */ + u8 cec_rx_data0; /* 0x7d20 */ + u8 cec_rx_data1; /* 0x7d21 */ + u8 cec_rx_data2; /* 0x7d22 */ + u8 cec_rx_data3; /* 0x7d23 */ + u8 cec_rx_data4; /* 0x7d24 */ + u8 cec_rx_data5; /* 0x7d25 */ + u8 cec_rx_data6; /* 0x7d26 */ + u8 cec_rx_data7; /* 0x7d27 */ + u8 cec_rx_data8; /* 0x7d28 */ + u8 cec_rx_data9; /* 0x7d29 */ + u8 cec_rx_data10; /* 0x7d2a */ + u8 cec_rx_data11; /* 0x7d2b */ + u8 cec_rx_data12; /* 0x7d2c */ + u8 cec_rx_data13; /* 0x7d2d */ + u8 cec_rx_data14; /* 0x7d2e */ + u8 cec_rx_data15; /* 0x7d2f */ + u8 cec_lock; /* 0x7d30 */ + u8 cec_wkupctrl; /* 0x7d31 */ + u8 reserved26[0xce]; + /* I2C Master Registers (E-DDC) */ + u8 i2cm_slave; /* 0x7e00 */ + u8 i2cmess; /* 0x7e01 */ + u8 i2cm_datao; /* 0x7e02 */ + u8 i2cm_datai; /* 0x7e03 */ + u8 i2cm_operation; /* 0x7e04 */ + u8 i2cm_int; /* 0x7e05 */ + u8 i2cm_ctlint; /* 0x7e06 */ + u8 i2cm_div; /* 0x7e07 */ + u8 i2cm_segaddr; /* 0x7e08 */ + u8 i2cm_softrstz; /* 0x7e09 */ + u8 i2cm_segptr; /* 0x7e0a */ + u8 i2cm_ss_scl_hcnt_1_addr; /* 0x7e0b */ + u8 i2cm_ss_scl_hcnt_0_addr; /* 0x7e0c */ + u8 i2cm_ss_scl_lcnt_1_addr; /* 0x7e0d */ + u8 i2cm_ss_scl_lcnt_0_addr; /* 0x7e0e */ + u8 i2cm_fs_scl_hcnt_1_addr; /* 0x7e0f */ + u8 i2cm_fs_scl_hcnt_0_addr; /* 0x7e10 */ + u8 i2cm_fs_scl_lcnt_1_addr; /* 0x7e11 */ + u8 i2cm_fs_scl_lcnt_0_addr; /* 0x7e12 */ + u8 reserved27[0x1ed]; + /* Random Number Generator Registers (RNG) */ + u8 rng_base; /* 0x8000 */ +}; /* * Register field definitions diff --git a/arch/arm/include/asm/arch-mxs/dma.h b/arch/arm/include/asm/arch-mxs/dma.h index a0a0ea5010..1ac8696e64 100644 --- a/arch/arm/include/asm/arch-mxs/dma.h +++ b/arch/arm/include/asm/arch-mxs/dma.h @@ -40,6 +40,19 @@ /* * MXS DMA channels */ +#if defined(CONFIG_MX23) +enum { + MXS_DMA_CHANNEL_AHB_APBH_LCDIF = 0, + MXS_DMA_CHANNEL_AHB_APBH_SSP0, + MXS_DMA_CHANNEL_AHB_APBH_SSP1, + MXS_DMA_CHANNEL_AHB_APBH_RESERVED0, + MXS_DMA_CHANNEL_AHB_APBH_GPMI0, + MXS_DMA_CHANNEL_AHB_APBH_GPMI1, + MXS_DMA_CHANNEL_AHB_APBH_GPMI2, + MXS_DMA_CHANNEL_AHB_APBH_GPMI3, + MXS_MAX_DMA_CHANNELS, +}; +#elif defined(CONFIG_MX28) enum { MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0, MXS_DMA_CHANNEL_AHB_APBH_SSP1, @@ -53,9 +66,13 @@ enum { MXS_DMA_CHANNEL_AHB_APBH_GPMI5, MXS_DMA_CHANNEL_AHB_APBH_GPMI6, MXS_DMA_CHANNEL_AHB_APBH_GPMI7, - MXS_DMA_CHANNEL_AHB_APBH_SSP, + MXS_DMA_CHANNEL_AHB_APBH_HSADC, + MXS_DMA_CHANNEL_AHB_APBH_LCDIF, + MXS_DMA_CHANNEL_AHB_APBH_RESERVED0, + MXS_DMA_CHANNEL_AHB_APBH_RESERVED1, MXS_MAX_DMA_CHANNELS, }; +#endif /* * MXS DMA hardware command. diff --git a/arch/arm/include/asm/arch-mxs/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h index 05eb63c6d2..8f67497760 100644 --- a/arch/arm/include/asm/arch-mxs/imx-regs.h +++ b/arch/arm/include/asm/arch-mxs/imx-regs.h @@ -36,6 +36,8 @@ #include <asm/arch/regs-rtc.h> #include <asm/arch/regs-ssp.h> #include <asm/arch/regs-timrot.h> +#include <asm/arch/regs-usb.h> +#include <asm/arch/regs-usbphy.h> #ifdef CONFIG_MX23 #include <asm/arch/regs-clkctrl-mx23.h> diff --git a/arch/arm/include/asm/arch-mxs/iomux.h b/arch/arm/include/asm/arch-mxs/iomux.h index 7abdf58b8b..42887154c4 100644 --- a/arch/arm/include/asm/arch-mxs/iomux.h +++ b/arch/arm/include/asm/arch-mxs/iomux.h @@ -21,6 +21,10 @@ #ifndef __MACH_MXS_IOMUX_H__ #define __MACH_MXS_IOMUX_H__ +#ifndef __ASSEMBLY__ + +#include <asm/types.h> + /* * IOMUX/PAD Bit field definitions * @@ -165,4 +169,5 @@ int mxs_iomux_setup_pad(iomux_cfg_t pad); */ int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count); +#endif /* __ASSEMBLY__ */ #endif /* __MACH_MXS_IOMUX_H__*/ diff --git a/arch/arm/include/asm/arch-mxs/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h index 9b30f56f54..5920f9b4dc 100644 --- a/arch/arm/include/asm/arch-mxs/regs-ssp.h +++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h @@ -74,6 +74,32 @@ struct mxs_ssp_regs { }; #endif +static inline int mxs_ssp_bus_id_valid(int bus) +{ +#if defined(CONFIG_MX23) + const unsigned int mxs_ssp_chan_count = 2; +#elif defined(CONFIG_MX28) + const unsigned int mxs_ssp_chan_count = 4; +#endif + + if (bus >= mxs_ssp_chan_count) + return 0; + + if (bus < 0) + return 0; + + return 1; +} + +static inline int mxs_ssp_clock_by_bus(unsigned int clock) +{ +#if defined(CONFIG_MX23) + return 0; +#elif defined(CONFIG_MX28) + return clock; +#endif +} + static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port) { switch (port) { diff --git a/arch/arm/include/asm/arch-mxs/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h index 529a3bcdd1..f8537f1636 100644 --- a/arch/arm/include/asm/arch-mxs/regs-timrot.h +++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h @@ -31,6 +31,16 @@ struct mxs_timrot_regs { mxs_reg_32(hw_timrot_rotctrl) mxs_reg_32(hw_timrot_rotcount) +#if defined(CONFIG_MX23) + mxs_reg_32(hw_timrot_timctrl0) + mxs_reg_32(hw_timrot_timcount0) + mxs_reg_32(hw_timrot_timctrl1) + mxs_reg_32(hw_timrot_timcount1) + mxs_reg_32(hw_timrot_timctrl2) + mxs_reg_32(hw_timrot_timcount2) + mxs_reg_32(hw_timrot_timctrl3) + mxs_reg_32(hw_timrot_timcount3) +#elif defined(CONFIG_MX28) mxs_reg_32(hw_timrot_timctrl0) mxs_reg_32(hw_timrot_running_count0) mxs_reg_32(hw_timrot_fixed_count0) @@ -47,6 +57,7 @@ struct mxs_timrot_regs { mxs_reg_32(hw_timrot_running_count3) mxs_reg_32(hw_timrot_fixed_count3) mxs_reg_32(hw_timrot_match_count3) +#endif mxs_reg_32(hw_timrot_version) }; #endif @@ -71,7 +82,11 @@ struct mxs_timrot_regs { #define TIMROT_ROTCTRL_OVERSAMPLE_1X (0x3 << 10) #define TIMROT_ROTCTRL_POLARITY_B (1 << 9) #define TIMROT_ROTCTRL_POLARITY_A (1 << 8) +#if defined(CONFIG_MX23) +#define TIMROT_ROTCTRL_SELECT_B_MASK (0x7 << 4) +#elif defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_B_MASK (0xf << 4) +#endif #define TIMROT_ROTCTRL_SELECT_B_OFFSET 4 #define TIMROT_ROTCTRL_SELECT_B_NEVER_TICK (0x0 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM0 (0x1 << 4) @@ -79,12 +94,21 @@ struct mxs_timrot_regs { #define TIMROT_ROTCTRL_SELECT_B_PWM2 (0x3 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM3 (0x4 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM4 (0x5 << 4) +#if defined(CONFIG_MX23) +#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x6 << 4) +#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0x7 << 4) +#elif defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_B_PWM5 (0x6 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM6 (0x7 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM7 (0x8 << 4) #define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x9 << 4) #define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0xa << 4) +#endif +#if defined(CONFIG_MX23) +#define TIMROT_ROTCTRL_SELECT_A_MASK 0x7 +#elif defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_A_MASK 0xf +#endif #define TIMROT_ROTCTRL_SELECT_A_OFFSET 0 #define TIMROT_ROTCTRL_SELECT_A_NEVER_TICK 0x0 #define TIMROT_ROTCTRL_SELECT_A_PWM0 0x1 @@ -92,18 +116,25 @@ struct mxs_timrot_regs { #define TIMROT_ROTCTRL_SELECT_A_PWM2 0x3 #define TIMROT_ROTCTRL_SELECT_A_PWM3 0x4 #define TIMROT_ROTCTRL_SELECT_A_PWM4 0x5 +#if defined(CONFIG_MX23) +#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x6 +#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0x7 +#elif defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_A_PWM5 0x6 #define TIMROT_ROTCTRL_SELECT_A_PWM6 0x7 #define TIMROT_ROTCTRL_SELECT_A_PWM7 0x8 #define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x9 #define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0xa +#endif #define TIMROT_ROTCOUNT_UPDOWN_MASK 0xffff #define TIMROT_ROTCOUNT_UPDOWN_OFFSET 0 #define TIMROT_TIMCTRLn_IRQ (1 << 15) #define TIMROT_TIMCTRLn_IRQ_EN (1 << 14) +#if defined(CONFIG_MX28) #define TIMROT_TIMCTRLn_MATCH_MODE (1 << 11) +#endif #define TIMROT_TIMCTRLn_POLARITY (1 << 8) #define TIMROT_TIMCTRLn_UPDATE (1 << 7) #define TIMROT_TIMCTRLn_RELOAD (1 << 6) @@ -121,6 +152,15 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRLn_SELECT_PWM2 0x3 #define TIMROT_TIMCTRLn_SELECT_PWM3 0x4 #define TIMROT_TIMCTRLn_SELECT_PWM4 0x5 +#if defined(CONFIG_MX23) +#define TIMROT_TIMCTRLn_SELECT_ROTARYA 0x6 +#define TIMROT_TIMCTRLn_SELECT_ROTARYB 0x7 +#define TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL 0x8 +#define TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL 0x9 +#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xa +#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xb +#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xc +#elif defined(CONFIG_MX28) #define TIMROT_TIMCTRLn_SELECT_PWM5 0x6 #define TIMROT_TIMCTRLn_SELECT_PWM6 0x7 #define TIMROT_TIMCTRLn_SELECT_PWM7 0x8 @@ -131,15 +171,28 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xd #define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xe #define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xf +#endif +#if defined(CONFIG_MX23) +#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK (0xffff << 16) +#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 16 +#elif defined(CONFIG_MX28) #define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK 0xffffffff #define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 0 +#endif +#if defined(CONFIG_MX23) +#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffff +#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0 +#elif defined(CONFIG_MX28) #define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffffffff #define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0 +#endif +#if defined(CONFIG_MX28) #define TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK 0xffffffff #define TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET 0 +#endif #define TIMROT_TIMCTRL3_TEST_SIGNAL_MASK (0xf << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET 16 @@ -149,6 +202,15 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2 (0x3 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3 (0x4 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4 (0x5 << 16) +#if defined(CONFIG_MX23) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA (0x6 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB (0x7 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL (0x8 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL (0x9 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xa << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xb << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xc << 16) +#elif defined(CONFIG_MX28) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5 (0x6 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6 (0x7 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7 (0x8 << 16) @@ -159,7 +221,46 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xd << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xe << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xf << 16) +#endif +#if defined(CONFIG_MX23) +#define TIMROT_TIMCTRL3_IRQ (1 << 15) +#define TIMROT_TIMCTRL3_IRQ_EN (1 << 14) +#define TIMROT_TIMCTRL3_DUTU_VALID (1 << 10) +#endif #define TIMROT_TIMCTRL3_DUTY_CYCLE (1 << 9) +#if defined(CONFIG_MX23) +#define TIMROT_TIMCTRL3_POLARITY_MASK (0x1 << 8) +#define TIMROT_TIMCTRL3_POLARITY_OFFSET 8 +#define TIMROT_TIMCTRL3_POLARITY_POSITIVE (0x0 << 8) +#define TIMROT_TIMCTRL3_POLARITY_NEGATIVE (0x1 << 8) +#define TIMROT_TIMCTRL3_UPDATE (1 << 7) +#define TIMROT_TIMCTRL3_RELOAD (1 << 6) +#define TIMROT_TIMCTRL3_PRESCALE_MASK (0x3 << 4) +#define TIMROT_TIMCTRL3_PRESCALE_OFFSET 4 +#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_1 (0x0 << 4) +#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_2 (0x1 << 4) +#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_4 (0x2 << 4) +#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_8 (0x3 << 4) +#define TIMROT_TIMCTRL3_SELECT_MASK 0xf +#define TIMROT_TIMCTRL3_SELECT_OFFSET 0 +#define TIMROT_TIMCTRL3_SELECT_NEVER_TICK 0x0 +#define TIMROT_TIMCTRL3_SELECT_PWM0 0x1 +#define TIMROT_TIMCTRL3_SELECT_PWM1 0x2 +#define TIMROT_TIMCTRL3_SELECT_PWM2 0x3 +#define TIMROT_TIMCTRL3_SELECT_PWM3 0x4 +#define TIMROT_TIMCTRL3_SELECT_PWM4 0x5 +#define TIMROT_TIMCTRL3_SELECT_ROTARYA 0x6 +#define TIMROT_TIMCTRL3_SELECT_ROTARYB 0x7 +#define TIMROT_TIMCTRL3_SELECT_32KHZ_XTAL 0x8 +#define TIMROT_TIMCTRL3_SELECT_8KHZ_XTAL 0x9 +#define TIMROT_TIMCTRL3_SELECT_4KHZ_XTAL 0xa +#define TIMROT_TIMCTRL3_SELECT_1KHZ_XTAL 0xb +#define TIMROT_TIMCTRL3_SELECT_TICK_ALWAYS 0xc +#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_MASK (0xffff << 16) +#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_OFFSET 16 +#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_MASK 0xffff +#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_OFFSET 0 +#endif #define TIMROT_VERSION_MAJOR_MASK (0xff << 24) #define TIMROT_VERSION_MAJOR_OFFSET 24 diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h index ffaffbb3bf..ae0babf17c 100644 --- a/arch/arm/include/asm/arch-omap3/dss.h +++ b/arch/arm/include/asm/arch-omap3/dss.h @@ -167,6 +167,36 @@ struct venc_regs { #define VENC_OUT_SEL (1 << 6) #define DIG_LPP_SHIFT 16 +/* LCD display type */ +#define PASSIVE_DISPLAY 0 +#define ACTIVE_DISPLAY 1 + +/* TFTDATALINES */ +#define LCD_INTERFACE_12_BIT 0 +#define LCD_INTERFACE_16_BIT 1 +#define LCD_INTERFACE_18_BIT 2 +#define LCD_INTERFACE_24_BIT 3 + +/* Polarity */ +#define DSS_IVS (1 << 12) +#define DSS_IHS (1 << 13) +#define DSS_IPC (1 << 14) +#define DSS_IEO (1 << 15) + +/* GFX format */ +#define GFXFORMAT_BITMAP1 (0x0 << 1) +#define GFXFORMAT_BITMAP2 (0x1 << 1) +#define GFXFORMAT_BITMAP4 (0x2 << 1) +#define GFXFORMAT_BITMAP8 (0x3 << 1) +#define GFXFORMAT_RGB12 (0x4 << 1) +#define GFXFORMAT_ARGB16 (0x5 << 1) +#define GFXFORMAT_RGB16 (0x6 << 1) +#define GFXFORMAT_RGB24_UNPACKED (0x8 << 1) +#define GFXFORMAT_RGB24_PACKED (0x9 << 1) +#define GFXFORMAT_ARGB32 (0xC << 1) +#define GFXFORMAT_RGBA32 (0xD << 1) +#define GFXFORMAT_RGBx32 (0xE << 1) + /* Panel Configuration */ struct panel_config { u32 timing_h; @@ -178,6 +208,7 @@ struct panel_config { u32 data_lines; u32 load_mode; u32 panel_color; + u32 gfx_format; void *frame_buffer; }; diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h index 3ce1f07b8a..0ba621a1b8 100644 --- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h @@ -25,6 +25,8 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* T2 Register definitions */ #define T2_BASE 0x48002000 @@ -59,142 +61,5 @@ typedef struct t2 { #define OMAP_HSMMC2_BASE 0x480B4000 #define OMAP_HSMMC3_BASE 0x480AD000 -struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -}; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h index 404e16a5a0..dec4dacbad 100644 --- a/arch/arm/include/asm/arch-omap3/spl.h +++ b/arch/arm/include/asm/arch-omap3/spl.h @@ -26,7 +26,7 @@ #define BOOT_DEVICE_NONE 0 #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_NAND 2 -#define BOOT_DEVICE_ONE_NAND 3 +#define BOOT_DEVICE_ONENAND 3 #define BOOT_DEVICE_MMC2 5 /*emmc*/ #define BOOT_DEVICE_MMC1 6 #define BOOT_DEVICE_XIPWAIT 7 diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h index be20fc0ce6..ed7a1c8be7 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clocks.h @@ -25,6 +25,7 @@ #ifndef _CLOCKS_OMAP4_H_ #define _CLOCKS_OMAP4_H_ #include <common.h> +#include <asm/omap_common.h> /* * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per @@ -38,479 +39,6 @@ #define CM_CLKMODE_DPLL_MPU 0x4A004160 #define CM_CLKSEL_CORE 0x4A004100 -struct omap4_prcm_regs { - /* cm1.ckgen */ - u32 cm_clksel_core; - u32 pad001[1]; - u32 cm_clksel_abe; - u32 pad002[1]; - u32 cm_dll_ctrl; - u32 pad003[3]; - u32 cm_clkmode_dpll_core; - u32 cm_idlest_dpll_core; - u32 cm_autoidle_dpll_core; - u32 cm_clksel_dpll_core; - u32 cm_div_m2_dpll_core; - u32 cm_div_m3_dpll_core; - u32 cm_div_m4_dpll_core; - u32 cm_div_m5_dpll_core; - u32 cm_div_m6_dpll_core; - u32 cm_div_m7_dpll_core; - u32 cm_ssc_deltamstep_dpll_core; - u32 cm_ssc_modfreqdiv_dpll_core; - u32 cm_emu_override_dpll_core; - u32 pad004[3]; - u32 cm_clkmode_dpll_mpu; - u32 cm_idlest_dpll_mpu; - u32 cm_autoidle_dpll_mpu; - u32 cm_clksel_dpll_mpu; - u32 cm_div_m2_dpll_mpu; - u32 pad005[5]; - u32 cm_ssc_deltamstep_dpll_mpu; - u32 cm_ssc_modfreqdiv_dpll_mpu; - u32 pad006[3]; - u32 cm_bypclk_dpll_mpu; - u32 cm_clkmode_dpll_iva; - u32 cm_idlest_dpll_iva; - u32 cm_autoidle_dpll_iva; - u32 cm_clksel_dpll_iva; - u32 pad007[2]; - u32 cm_div_m4_dpll_iva; - u32 cm_div_m5_dpll_iva; - u32 pad008[2]; - u32 cm_ssc_deltamstep_dpll_iva; - u32 cm_ssc_modfreqdiv_dpll_iva; - u32 pad009[3]; - u32 cm_bypclk_dpll_iva; - u32 cm_clkmode_dpll_abe; - u32 cm_idlest_dpll_abe; - u32 cm_autoidle_dpll_abe; - u32 cm_clksel_dpll_abe; - u32 cm_div_m2_dpll_abe; - u32 cm_div_m3_dpll_abe; - u32 pad010[4]; - u32 cm_ssc_deltamstep_dpll_abe; - u32 cm_ssc_modfreqdiv_dpll_abe; - u32 pad011[4]; - u32 cm_clkmode_dpll_ddrphy; - u32 cm_idlest_dpll_ddrphy; - u32 cm_autoidle_dpll_ddrphy; - u32 cm_clksel_dpll_ddrphy; - u32 cm_div_m2_dpll_ddrphy; - u32 pad012[1]; - u32 cm_div_m4_dpll_ddrphy; - u32 cm_div_m5_dpll_ddrphy; - u32 cm_div_m6_dpll_ddrphy; - u32 pad013[1]; - u32 cm_ssc_deltamstep_dpll_ddrphy; - u32 pad014[5]; - u32 cm_shadow_freq_config1; - u32 pad0141[47]; - u32 cm_mpu_mpu_clkctrl; - - /* cm1.dsp */ - u32 pad015[55]; - u32 cm_dsp_clkstctrl; - u32 pad016[7]; - u32 cm_dsp_dsp_clkctrl; - - /* cm1.abe */ - u32 pad017[55]; - u32 cm1_abe_clkstctrl; - u32 pad018[7]; - u32 cm1_abe_l4abe_clkctrl; - u32 pad019[1]; - u32 cm1_abe_aess_clkctrl; - u32 pad020[1]; - u32 cm1_abe_pdm_clkctrl; - u32 pad021[1]; - u32 cm1_abe_dmic_clkctrl; - u32 pad022[1]; - u32 cm1_abe_mcasp_clkctrl; - u32 pad023[1]; - u32 cm1_abe_mcbsp1_clkctrl; - u32 pad024[1]; - u32 cm1_abe_mcbsp2_clkctrl; - u32 pad025[1]; - u32 cm1_abe_mcbsp3_clkctrl; - u32 pad026[1]; - u32 cm1_abe_slimbus_clkctrl; - u32 pad027[1]; - u32 cm1_abe_timer5_clkctrl; - u32 pad028[1]; - u32 cm1_abe_timer6_clkctrl; - u32 pad029[1]; - u32 cm1_abe_timer7_clkctrl; - u32 pad030[1]; - u32 cm1_abe_timer8_clkctrl; - u32 pad031[1]; - u32 cm1_abe_wdt3_clkctrl; - - /* cm2.ckgen */ - u32 pad032[3805]; - u32 cm_clksel_mpu_m3_iss_root; - u32 cm_clksel_usb_60mhz; - u32 cm_scale_fclk; - u32 pad033[1]; - u32 cm_core_dvfs_perf1; - u32 cm_core_dvfs_perf2; - u32 cm_core_dvfs_perf3; - u32 cm_core_dvfs_perf4; - u32 pad034[1]; - u32 cm_core_dvfs_current; - u32 cm_iva_dvfs_perf_tesla; - u32 cm_iva_dvfs_perf_ivahd; - u32 cm_iva_dvfs_perf_abe; - u32 pad035[1]; - u32 cm_iva_dvfs_current; - u32 pad036[1]; - u32 cm_clkmode_dpll_per; - u32 cm_idlest_dpll_per; - u32 cm_autoidle_dpll_per; - u32 cm_clksel_dpll_per; - u32 cm_div_m2_dpll_per; - u32 cm_div_m3_dpll_per; - u32 cm_div_m4_dpll_per; - u32 cm_div_m5_dpll_per; - u32 cm_div_m6_dpll_per; - u32 cm_div_m7_dpll_per; - u32 cm_ssc_deltamstep_dpll_per; - u32 cm_ssc_modfreqdiv_dpll_per; - u32 cm_emu_override_dpll_per; - u32 pad037[3]; - u32 cm_clkmode_dpll_usb; - u32 cm_idlest_dpll_usb; - u32 cm_autoidle_dpll_usb; - u32 cm_clksel_dpll_usb; - u32 cm_div_m2_dpll_usb; - u32 pad038[5]; - u32 cm_ssc_deltamstep_dpll_usb; - u32 cm_ssc_modfreqdiv_dpll_usb; - u32 pad039[1]; - u32 cm_clkdcoldo_dpll_usb; - u32 pad040[2]; - u32 cm_clkmode_dpll_unipro; - u32 cm_idlest_dpll_unipro; - u32 cm_autoidle_dpll_unipro; - u32 cm_clksel_dpll_unipro; - u32 cm_div_m2_dpll_unipro; - u32 pad041[5]; - u32 cm_ssc_deltamstep_dpll_unipro; - u32 cm_ssc_modfreqdiv_dpll_unipro; - - /* cm2.core */ - u32 pad0411[324]; - u32 cm_l3_1_clkstctrl; - u32 pad042[1]; - u32 cm_l3_1_dynamicdep; - u32 pad043[5]; - u32 cm_l3_1_l3_1_clkctrl; - u32 pad044[55]; - u32 cm_l3_2_clkstctrl; - u32 pad045[1]; - u32 cm_l3_2_dynamicdep; - u32 pad046[5]; - u32 cm_l3_2_l3_2_clkctrl; - u32 pad047[1]; - u32 cm_l3_2_gpmc_clkctrl; - u32 pad048[1]; - u32 cm_l3_2_ocmc_ram_clkctrl; - u32 pad049[51]; - u32 cm_mpu_m3_clkstctrl; - u32 cm_mpu_m3_staticdep; - u32 cm_mpu_m3_dynamicdep; - u32 pad050[5]; - u32 cm_mpu_m3_mpu_m3_clkctrl; - u32 pad051[55]; - u32 cm_sdma_clkstctrl; - u32 cm_sdma_staticdep; - u32 cm_sdma_dynamicdep; - u32 pad052[5]; - u32 cm_sdma_sdma_clkctrl; - u32 pad053[55]; - u32 cm_memif_clkstctrl; - u32 pad054[7]; - u32 cm_memif_dmm_clkctrl; - u32 pad055[1]; - u32 cm_memif_emif_fw_clkctrl; - u32 pad056[1]; - u32 cm_memif_emif_1_clkctrl; - u32 pad057[1]; - u32 cm_memif_emif_2_clkctrl; - u32 pad058[1]; - u32 cm_memif_dll_clkctrl; - u32 pad059[3]; - u32 cm_memif_emif_h1_clkctrl; - u32 pad060[1]; - u32 cm_memif_emif_h2_clkctrl; - u32 pad061[1]; - u32 cm_memif_dll_h_clkctrl; - u32 pad062[39]; - u32 cm_c2c_clkstctrl; - u32 cm_c2c_staticdep; - u32 cm_c2c_dynamicdep; - u32 pad063[5]; - u32 cm_c2c_sad2d_clkctrl; - u32 pad064[1]; - u32 cm_c2c_modem_icr_clkctrl; - u32 pad065[1]; - u32 cm_c2c_sad2d_fw_clkctrl; - u32 pad066[51]; - u32 cm_l4cfg_clkstctrl; - u32 pad067[1]; - u32 cm_l4cfg_dynamicdep; - u32 pad068[5]; - u32 cm_l4cfg_l4_cfg_clkctrl; - u32 pad069[1]; - u32 cm_l4cfg_hw_sem_clkctrl; - u32 pad070[1]; - u32 cm_l4cfg_mailbox_clkctrl; - u32 pad071[1]; - u32 cm_l4cfg_sar_rom_clkctrl; - u32 pad072[49]; - u32 cm_l3instr_clkstctrl; - u32 pad073[7]; - u32 cm_l3instr_l3_3_clkctrl; - u32 pad074[1]; - u32 cm_l3instr_l3_instr_clkctrl; - u32 pad075[5]; - u32 cm_l3instr_intrconn_wp1_clkctrl; - - - /* cm2.ivahd */ - u32 pad076[47]; - u32 cm_ivahd_clkstctrl; - u32 pad077[7]; - u32 cm_ivahd_ivahd_clkctrl; - u32 pad078[1]; - u32 cm_ivahd_sl2_clkctrl; - - /* cm2.cam */ - u32 pad079[53]; - u32 cm_cam_clkstctrl; - u32 pad080[7]; - u32 cm_cam_iss_clkctrl; - u32 pad081[1]; - u32 cm_cam_fdif_clkctrl; - - /* cm2.dss */ - u32 pad082[53]; - u32 cm_dss_clkstctrl; - u32 pad083[7]; - u32 cm_dss_dss_clkctrl; - - /* cm2.sgx */ - u32 pad084[55]; - u32 cm_sgx_clkstctrl; - u32 pad085[7]; - u32 cm_sgx_sgx_clkctrl; - - /* cm2.l3init */ - u32 pad086[55]; - u32 cm_l3init_clkstctrl; - - /* cm2.l3init */ - u32 pad087[9]; - u32 cm_l3init_hsmmc1_clkctrl; - u32 pad088[1]; - u32 cm_l3init_hsmmc2_clkctrl; - u32 pad089[1]; - u32 cm_l3init_hsi_clkctrl; - u32 pad090[7]; - u32 cm_l3init_hsusbhost_clkctrl; - u32 pad091[1]; - u32 cm_l3init_hsusbotg_clkctrl; - u32 pad092[1]; - u32 cm_l3init_hsusbtll_clkctrl; - u32 pad093[3]; - u32 cm_l3init_p1500_clkctrl; - u32 pad094[21]; - u32 cm_l3init_fsusb_clkctrl; - u32 pad095[3]; - u32 cm_l3init_usbphy_clkctrl; - - /* cm2.l4per */ - u32 pad096[7]; - u32 cm_l4per_clkstctrl; - u32 pad097[1]; - u32 cm_l4per_dynamicdep; - u32 pad098[5]; - u32 cm_l4per_adc_clkctrl; - u32 pad100[1]; - u32 cm_l4per_gptimer10_clkctrl; - u32 pad101[1]; - u32 cm_l4per_gptimer11_clkctrl; - u32 pad102[1]; - u32 cm_l4per_gptimer2_clkctrl; - u32 pad103[1]; - u32 cm_l4per_gptimer3_clkctrl; - u32 pad104[1]; - u32 cm_l4per_gptimer4_clkctrl; - u32 pad105[1]; - u32 cm_l4per_gptimer9_clkctrl; - u32 pad106[1]; - u32 cm_l4per_elm_clkctrl; - u32 pad107[1]; - u32 cm_l4per_gpio2_clkctrl; - u32 pad108[1]; - u32 cm_l4per_gpio3_clkctrl; - u32 pad109[1]; - u32 cm_l4per_gpio4_clkctrl; - u32 pad110[1]; - u32 cm_l4per_gpio5_clkctrl; - u32 pad111[1]; - u32 cm_l4per_gpio6_clkctrl; - u32 pad112[1]; - u32 cm_l4per_hdq1w_clkctrl; - u32 pad113[1]; - u32 cm_l4per_hecc1_clkctrl; - u32 pad114[1]; - u32 cm_l4per_hecc2_clkctrl; - u32 pad115[1]; - u32 cm_l4per_i2c1_clkctrl; - u32 pad116[1]; - u32 cm_l4per_i2c2_clkctrl; - u32 pad117[1]; - u32 cm_l4per_i2c3_clkctrl; - u32 pad118[1]; - u32 cm_l4per_i2c4_clkctrl; - u32 pad119[1]; - u32 cm_l4per_l4per_clkctrl; - u32 pad1191[3]; - u32 cm_l4per_mcasp2_clkctrl; - u32 pad120[1]; - u32 cm_l4per_mcasp3_clkctrl; - u32 pad121[1]; - u32 cm_l4per_mcbsp4_clkctrl; - u32 pad122[1]; - u32 cm_l4per_mgate_clkctrl; - u32 pad123[1]; - u32 cm_l4per_mcspi1_clkctrl; - u32 pad124[1]; - u32 cm_l4per_mcspi2_clkctrl; - u32 pad125[1]; - u32 cm_l4per_mcspi3_clkctrl; - u32 pad126[1]; - u32 cm_l4per_mcspi4_clkctrl; - u32 pad127[5]; - u32 cm_l4per_mmcsd3_clkctrl; - u32 pad128[1]; - u32 cm_l4per_mmcsd4_clkctrl; - u32 pad129[1]; - u32 cm_l4per_msprohg_clkctrl; - u32 pad130[1]; - u32 cm_l4per_slimbus2_clkctrl; - u32 pad131[1]; - u32 cm_l4per_uart1_clkctrl; - u32 pad132[1]; - u32 cm_l4per_uart2_clkctrl; - u32 pad133[1]; - u32 cm_l4per_uart3_clkctrl; - u32 pad134[1]; - u32 cm_l4per_uart4_clkctrl; - u32 pad135[1]; - u32 cm_l4per_mmcsd5_clkctrl; - u32 pad136[1]; - u32 cm_l4per_i2c5_clkctrl; - u32 pad137[5]; - u32 cm_l4sec_clkstctrl; - u32 cm_l4sec_staticdep; - u32 cm_l4sec_dynamicdep; - u32 pad138[5]; - u32 cm_l4sec_aes1_clkctrl; - u32 pad139[1]; - u32 cm_l4sec_aes2_clkctrl; - u32 pad140[1]; - u32 cm_l4sec_des3des_clkctrl; - u32 pad141[1]; - u32 cm_l4sec_pkaeip29_clkctrl; - u32 pad142[1]; - u32 cm_l4sec_rng_clkctrl; - u32 pad143[1]; - u32 cm_l4sec_sha2md51_clkctrl; - u32 pad144[3]; - u32 cm_l4sec_cryptodma_clkctrl; - u32 pad145[776841]; - - /* l4 wkup regs */ - u32 pad201[6211]; - u32 cm_abe_pll_ref_clksel; - u32 cm_sys_clksel; - u32 pad202[1467]; - u32 cm_wkup_clkstctrl; - u32 pad203[7]; - u32 cm_wkup_l4wkup_clkctrl; - u32 pad204; - u32 cm_wkup_wdtimer1_clkctrl; - u32 pad205; - u32 cm_wkup_wdtimer2_clkctrl; - u32 pad206; - u32 cm_wkup_gpio1_clkctrl; - u32 pad207; - u32 cm_wkup_gptimer1_clkctrl; - u32 pad208; - u32 cm_wkup_gptimer12_clkctrl; - u32 pad209; - u32 cm_wkup_synctimer_clkctrl; - u32 pad210; - u32 cm_wkup_usim_clkctrl; - u32 pad211; - u32 cm_wkup_sarram_clkctrl; - u32 pad212[5]; - u32 cm_wkup_keyboard_clkctrl; - u32 pad213; - u32 cm_wkup_rtc_clkctrl; - u32 pad214; - u32 cm_wkup_bandgap_clkctrl; - u32 pad215[197]; - u32 prm_vc_val_bypass; - u32 prm_vc_cfg_channel; - u32 prm_vc_cfg_i2c_mode; - u32 prm_vc_cfg_i2c_clk; - -}; - -struct omap4_scrm_regs { - u32 revision; /* 0x0000 */ - u32 pad00[63]; - u32 clksetuptime; /* 0x0100 */ - u32 pmicsetuptime; /* 0x0104 */ - u32 pad01[2]; - u32 altclksrc; /* 0x0110 */ - u32 pad02[2]; - u32 c2cclkm; /* 0x011c */ - u32 pad03[56]; - u32 extclkreq; /* 0x0200 */ - u32 accclkreq; /* 0x0204 */ - u32 pwrreq; /* 0x0208 */ - u32 pad04[1]; - u32 auxclkreq0; /* 0x0210 */ - u32 auxclkreq1; /* 0x0214 */ - u32 auxclkreq2; /* 0x0218 */ - u32 auxclkreq3; /* 0x021c */ - u32 auxclkreq4; /* 0x0220 */ - u32 auxclkreq5; /* 0x0224 */ - u32 pad05[3]; - u32 c2cclkreq; /* 0x0234 */ - u32 pad06[54]; - u32 auxclk0; /* 0x0310 */ - u32 auxclk1; /* 0x0314 */ - u32 auxclk2; /* 0x0318 */ - u32 auxclk3; /* 0x031c */ - u32 auxclk4; /* 0x0320 */ - u32 auxclk5; /* 0x0324 */ - u32 pad07[54]; - u32 rsttime_reg; /* 0x0400 */ - u32 pad08[6]; - u32 c2crstctrl; /* 0x041c */ - u32 extpwronrstctrl; /* 0x0420 */ - u32 pad09[59]; - u32 extwarmrstst_reg; /* 0x0510 */ - u32 apewarmrstst_reg; /* 0x0514 */ - u32 pad10[1]; - u32 c2cwarmrstst_reg; /* 0x051C */ -}; - /* DPLL register offsets */ #define CM_CLKMODE_DPLL 0 #define CM_IDLEST_DPLL 0x4 @@ -714,54 +242,44 @@ struct omap4_scrm_regs { #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 -#define NUM_SYS_CLKS 7 - -struct dpll_regs { - u32 cm_clkmode_dpll; - u32 cm_idlest_dpll; - u32 cm_autoidle_dpll; - u32 cm_clksel_dpll; - u32 cm_div_m2_dpll; - u32 cm_div_m3_dpll; - u32 cm_div_m4_dpll; - u32 cm_div_m5_dpll; - u32 cm_div_m6_dpll; - u32 cm_div_m7_dpll; -}; - -/* DPLL parameter table */ -struct dpll_params { - u32 m; - u32 n; - s8 m2; - s8 m3; - s8 m4; - s8 m5; - s8 m6; - s8 m7; +struct omap4_scrm_regs { + u32 revision; /* 0x0000 */ + u32 pad00[63]; + u32 clksetuptime; /* 0x0100 */ + u32 pmicsetuptime; /* 0x0104 */ + u32 pad01[2]; + u32 altclksrc; /* 0x0110 */ + u32 pad02[2]; + u32 c2cclkm; /* 0x011c */ + u32 pad03[56]; + u32 extclkreq; /* 0x0200 */ + u32 accclkreq; /* 0x0204 */ + u32 pwrreq; /* 0x0208 */ + u32 pad04[1]; + u32 auxclkreq0; /* 0x0210 */ + u32 auxclkreq1; /* 0x0214 */ + u32 auxclkreq2; /* 0x0218 */ + u32 auxclkreq3; /* 0x021c */ + u32 auxclkreq4; /* 0x0220 */ + u32 auxclkreq5; /* 0x0224 */ + u32 pad05[3]; + u32 c2cclkreq; /* 0x0234 */ + u32 pad06[54]; + u32 auxclk0; /* 0x0310 */ + u32 auxclk1; /* 0x0314 */ + u32 auxclk2; /* 0x0318 */ + u32 auxclk3; /* 0x031c */ + u32 auxclk4; /* 0x0320 */ + u32 auxclk5; /* 0x0324 */ + u32 pad07[54]; + u32 rsttime_reg; /* 0x0400 */ + u32 pad08[6]; + u32 c2crstctrl; /* 0x041c */ + u32 extpwronrstctrl; /* 0x0420 */ + u32 pad09[59]; + u32 extwarmrstst_reg; /* 0x0510 */ + u32 apewarmrstst_reg; /* 0x0514 */ + u32 pad10[1]; + u32 c2cwarmrstst_reg; /* 0x051C */ }; - -extern struct omap4_prcm_regs *const prcm; -extern const u32 sys_clk_array[8]; - -void scale_vcores(void); -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv); -u32 get_offset_code(u32 offset); -u32 omap_ddr_clk(void); -void do_scale_vcore(u32 vcore_reg, u32 volt_mv); -void setup_post_dividers(u32 *const base, const struct dpll_params *params); -u32 get_sys_clk_index(void); -void enable_basic_clocks(void); -void enable_basic_uboot_clocks(void); -void enable_non_essential_clocks(void); -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, - u8 wait_for_enable); -const struct dpll_params *get_mpu_dpll_params(void); -const struct dpll_params *get_core_dpll_params(void); -const struct dpll_params *get_per_dpll_params(void); -const struct dpll_params *get_iva_dpll_params(void); -const struct dpll_params *get_usb_dpll_params(void); -const struct dpll_params *get_abe_dpll_params(void); #endif /* _CLOCKS_OMAP4_H_ */ diff --git a/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/arch/arm/include/asm/arch-omap4/mmc_host_def.h index 2114046e71..9c8ccb6c83 100644 --- a/arch/arm/include/asm/arch-omap4/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap4/mmc_host_def.h @@ -25,6 +25,8 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* * OMAP HSMMC register definitions */ @@ -33,142 +35,4 @@ #define OMAP_HSMMC2_BASE 0x480B4100 #define OMAP_HSMMC3_BASE 0x480AD100 -struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -}; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index d4b5076108..5f321fe6f0 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -132,34 +132,6 @@ struct s32ktimer { #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) #define DEVICE_GP 0x3 -struct omap_sys_ctrl_regs { - unsigned int pad1[129]; - unsigned int control_id_code; /* 0x4A002204 */ - unsigned int pad11[22]; - unsigned int control_std_fuse_opp_bgap; /* 0x4a002260 */ - unsigned int pad2[24]; /* 0x4a002264 */ - unsigned int control_status; /* 0x4a0022c4 */ - unsigned int pad3[22]; /* 0x4a0022c8 */ - unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */ - unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */ - unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */ - unsigned int pad4[260277]; - unsigned int control_pbiaslite; /* 0x4A100600 */ - unsigned int pad5[63]; - unsigned int control_efuse_1; /* 0x4A100700 */ - unsigned int control_efuse_2; /* 0x4A100704 */ -}; - -struct control_lpddr2io_regs { - unsigned int control_lpddr2io1_0; - unsigned int control_lpddr2io1_1; - unsigned int control_lpddr2io1_2; - unsigned int control_lpddr2io1_3; - unsigned int control_lpddr2io2_0; - unsigned int control_lpddr2io2_1; - unsigned int control_lpddr2io2_2; - unsigned int control_lpddr2io2_3; -}; #endif /* __ASSEMBLY__ */ /* @@ -178,7 +150,11 @@ struct control_lpddr2io_regs { #define OMAP4_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) #define OMAP4_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) -#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C) +#define OMAP4_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20) +#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24) /* ROM code defines */ /* Boot device */ diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h index cec84dc548..4e094f9c60 100644 --- a/arch/arm/include/asm/arch-omap4/spl.h +++ b/arch/arm/include/asm/arch-omap4/spl.h @@ -27,7 +27,7 @@ #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 #define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_ONENAND 4 #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 0xFF diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index b48f81dc33..d5f1868eee 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -44,7 +44,7 @@ void sdelay(unsigned long); void set_pl310_ctrl_reg(u32 val); void setup_clocks_for_console(void); void prcm_init(void); -void bypass_dpll(u32 *const base); +void bypass_dpll(u32 const base); void freq_update_core(void); u32 get_sys_clk_freq(void); u32 omap4_ddr_clk(void); diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h index 5f1a7aa770..cfde374333 100644 --- a/arch/arm/include/asm/arch-omap5/clocks.h +++ b/arch/arm/include/asm/arch-omap5/clocks.h @@ -26,6 +26,7 @@ #ifndef _CLOCKS_OMAP5_H_ #define _CLOCKS_OMAP5_H_ #include <common.h> +#include <asm/omap_common.h> /* * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per @@ -39,456 +40,6 @@ #define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160) #define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100) -struct omap5_prcm_regs { - /* cm1.ckgen */ - u32 cm_clksel_core; /* 4a004100 */ - u32 pad001[1]; /* 4a004104 */ - u32 cm_clksel_abe; /* 4a004108 */ - u32 pad002[1]; /* 4a00410c */ - u32 cm_dll_ctrl; /* 4a004110 */ - u32 pad003[3]; /* 4a004114 */ - u32 cm_clkmode_dpll_core; /* 4a004120 */ - u32 cm_idlest_dpll_core; /* 4a004124 */ - u32 cm_autoidle_dpll_core; /* 4a004128 */ - u32 cm_clksel_dpll_core; /* 4a00412c */ - u32 cm_div_m2_dpll_core; /* 4a004130 */ - u32 cm_div_m3_dpll_core; /* 4a004134 */ - u32 cm_div_h11_dpll_core; /* 4a004138 */ - u32 cm_div_h12_dpll_core; /* 4a00413c */ - u32 cm_div_h13_dpll_core; /* 4a004140 */ - u32 cm_div_h14_dpll_core; /* 4a004144 */ - u32 cm_ssc_deltamstep_dpll_core; /* 4a004148 */ - u32 cm_ssc_modfreqdiv_dpll_core; /* 4a00414c */ - u32 cm_emu_override_dpll_core; /* 4a004150 */ - - u32 cm_div_h22_dpllcore; /* 4a004154 */ - u32 cm_div_h23_dpll_core; /* 4a004158 */ - u32 pad0041[1]; /* 4a00415c */ - u32 cm_clkmode_dpll_mpu; /* 4a004160 */ - u32 cm_idlest_dpll_mpu; /* 4a004164 */ - u32 cm_autoidle_dpll_mpu; /* 4a004168 */ - u32 cm_clksel_dpll_mpu; /* 4a00416c */ - u32 cm_div_m2_dpll_mpu; /* 4a004170 */ - u32 pad005[5]; /* 4a004174 */ - u32 cm_ssc_deltamstep_dpll_mpu; /* 4a004188 */ - u32 cm_ssc_modfreqdiv_dpll_mpu; /* 4a00418c */ - u32 pad006[3]; /* 4a004190 */ - u32 cm_bypclk_dpll_mpu; /* 4a00419c */ - u32 cm_clkmode_dpll_iva; /* 4a0041a0 */ - u32 cm_idlest_dpll_iva; /* 4a0041a4 */ - u32 cm_autoidle_dpll_iva; /* 4a0041a8 */ - u32 cm_clksel_dpll_iva; /* 4a0041ac */ - u32 pad007[2]; /* 4a0041b0 */ - u32 cm_div_h11_dpll_iva; /* 4a0041b8 */ - u32 cm_div_h12_dpll_iva; /* 4a0041bc */ - u32 pad008[2]; /* 4a0041c0 */ - u32 cm_ssc_deltamstep_dpll_iva; /* 4a0041c8 */ - u32 cm_ssc_modfreqdiv_dpll_iva; /* 4a0041cc */ - u32 pad009[3]; /* 4a0041d0 */ - u32 cm_bypclk_dpll_iva; /* 4a0041dc */ - u32 cm_clkmode_dpll_abe; /* 4a0041e0 */ - u32 cm_idlest_dpll_abe; /* 4a0041e4 */ - u32 cm_autoidle_dpll_abe; /* 4a0041e8 */ - u32 cm_clksel_dpll_abe; /* 4a0041ec */ - u32 cm_div_m2_dpll_abe; /* 4a0041f0 */ - u32 cm_div_m3_dpll_abe; /* 4a0041f4 */ - u32 pad010[4]; /* 4a0041f8 */ - u32 cm_ssc_deltamstep_dpll_abe; /* 4a004208 */ - u32 cm_ssc_modfreqdiv_dpll_abe; /* 4a00420c */ - u32 pad011[4]; /* 4a004210 */ - u32 cm_clkmode_dpll_ddrphy; /* 4a004220 */ - u32 cm_idlest_dpll_ddrphy; /* 4a004224 */ - u32 cm_autoidle_dpll_ddrphy; /* 4a004228 */ - u32 cm_clksel_dpll_ddrphy; /* 4a00422c */ - u32 cm_div_m2_dpll_ddrphy; /* 4a004230 */ - u32 pad012[1]; /* 4a004234 */ - u32 cm_div_h11_dpll_ddrphy; /* 4a004238 */ - u32 cm_div_h12_dpll_ddrphy; /* 4a00423c */ - u32 cm_div_h13_dpll_ddrphy; /* 4a004240 */ - u32 pad013[1]; /* 4a004244 */ - u32 cm_ssc_deltamstep_dpll_ddrphy; /* 4a004248 */ - u32 pad014[5]; /* 4a00424c */ - u32 cm_shadow_freq_config1; /* 4a004260 */ - u32 pad0141[47]; /* 4a004264 */ - u32 cm_mpu_mpu_clkctrl; /* 4a004320 */ - - - /* cm1.dsp */ - u32 pad015[55]; /* 4a004324 */ - u32 cm_dsp_clkstctrl; /* 4a004400 */ - u32 pad016[7]; /* 4a004404 */ - u32 cm_dsp_dsp_clkctrl; /* 4a004420 */ - - /* cm1.abe */ - u32 pad017[55]; /* 4a004424 */ - u32 cm1_abe_clkstctrl; /* 4a004500 */ - u32 pad018[7]; /* 4a004504 */ - u32 cm1_abe_l4abe_clkctrl; /* 4a004520 */ - u32 pad019[1]; /* 4a004524 */ - u32 cm1_abe_aess_clkctrl; /* 4a004528 */ - u32 pad020[1]; /* 4a00452c */ - u32 cm1_abe_pdm_clkctrl; /* 4a004530 */ - u32 pad021[1]; /* 4a004534 */ - u32 cm1_abe_dmic_clkctrl; /* 4a004538 */ - u32 pad022[1]; /* 4a00453c */ - u32 cm1_abe_mcasp_clkctrl; /* 4a004540 */ - u32 pad023[1]; /* 4a004544 */ - u32 cm1_abe_mcbsp1_clkctrl; /* 4a004548 */ - u32 pad024[1]; /* 4a00454c */ - u32 cm1_abe_mcbsp2_clkctrl; /* 4a004550 */ - u32 pad025[1]; /* 4a004554 */ - u32 cm1_abe_mcbsp3_clkctrl; /* 4a004558 */ - u32 pad026[1]; /* 4a00455c */ - u32 cm1_abe_slimbus_clkctrl; /* 4a004560 */ - u32 pad027[1]; /* 4a004564 */ - u32 cm1_abe_timer5_clkctrl; /* 4a004568 */ - u32 pad028[1]; /* 4a00456c */ - u32 cm1_abe_timer6_clkctrl; /* 4a004570 */ - u32 pad029[1]; /* 4a004574 */ - u32 cm1_abe_timer7_clkctrl; /* 4a004578 */ - u32 pad030[1]; /* 4a00457c */ - u32 cm1_abe_timer8_clkctrl; /* 4a004580 */ - u32 pad031[1]; /* 4a004584 */ - u32 cm1_abe_wdt3_clkctrl; /* 4a004588 */ - - /* cm2.ckgen */ - u32 pad032[3805]; /* 4a00458c */ - u32 cm_clksel_mpu_m3_iss_root; /* 4a008100 */ - u32 cm_clksel_usb_60mhz; /* 4a008104 */ - u32 cm_scale_fclk; /* 4a008108 */ - u32 pad033[1]; /* 4a00810c */ - u32 cm_core_dvfs_perf1; /* 4a008110 */ - u32 cm_core_dvfs_perf2; /* 4a008114 */ - u32 cm_core_dvfs_perf3; /* 4a008118 */ - u32 cm_core_dvfs_perf4; /* 4a00811c */ - u32 pad034[1]; /* 4a008120 */ - u32 cm_core_dvfs_current; /* 4a008124 */ - u32 cm_iva_dvfs_perf_tesla; /* 4a008128 */ - u32 cm_iva_dvfs_perf_ivahd; /* 4a00812c */ - u32 cm_iva_dvfs_perf_abe; /* 4a008130 */ - u32 pad035[1]; /* 4a008134 */ - u32 cm_iva_dvfs_current; /* 4a008138 */ - u32 pad036[1]; /* 4a00813c */ - u32 cm_clkmode_dpll_per; /* 4a008140 */ - u32 cm_idlest_dpll_per; /* 4a008144 */ - u32 cm_autoidle_dpll_per; /* 4a008148 */ - u32 cm_clksel_dpll_per; /* 4a00814c */ - u32 cm_div_m2_dpll_per; /* 4a008150 */ - u32 cm_div_m3_dpll_per; /* 4a008154 */ - u32 cm_div_h11_dpll_per; /* 4a008158 */ - u32 cm_div_h12_dpll_per; /* 4a00815c */ - u32 pad0361[1]; /* 4a008160 */ - u32 cm_div_h14_dpll_per; /* 4a008164 */ - u32 cm_ssc_deltamstep_dpll_per; /* 4a008168 */ - u32 cm_ssc_modfreqdiv_dpll_per; /* 4a00816c */ - u32 cm_emu_override_dpll_per; /* 4a008170 */ - u32 pad037[3]; /* 4a008174 */ - u32 cm_clkmode_dpll_usb; /* 4a008180 */ - u32 cm_idlest_dpll_usb; /* 4a008184 */ - u32 cm_autoidle_dpll_usb; /* 4a008188 */ - u32 cm_clksel_dpll_usb; /* 4a00818c */ - u32 cm_div_m2_dpll_usb; /* 4a008190 */ - u32 pad038[5]; /* 4a008194 */ - u32 cm_ssc_deltamstep_dpll_usb; /* 4a0081a8 */ - u32 cm_ssc_modfreqdiv_dpll_usb; /* 4a0081ac */ - u32 pad039[1]; /* 4a0081b0 */ - u32 cm_clkdcoldo_dpll_usb; /* 4a0081b4 */ - u32 pad040[2]; /* 4a0081b8 */ - u32 cm_clkmode_dpll_unipro; /* 4a0081c0 */ - u32 cm_idlest_dpll_unipro; /* 4a0081c4 */ - u32 cm_autoidle_dpll_unipro; /* 4a0081c8 */ - u32 cm_clksel_dpll_unipro; /* 4a0081cc */ - u32 cm_div_m2_dpll_unipro; /* 4a0081d0 */ - u32 pad041[5]; /* 4a0081d4 */ - u32 cm_ssc_deltamstep_dpll_unipro; /* 4a0081e8 */ - u32 cm_ssc_modfreqdiv_dpll_unipro; /* 4a0081ec */ - - /* cm2.core */ - u32 pad0411[324]; /* 4a0081f0 */ - u32 cm_l3_1_clkstctrl; /* 4a008700 */ - u32 pad042[1]; /* 4a008704 */ - u32 cm_l3_1_dynamicdep; /* 4a008708 */ - u32 pad043[5]; /* 4a00870c */ - u32 cm_l3_1_l3_1_clkctrl; /* 4a008720 */ - u32 pad044[55]; /* 4a008724 */ - u32 cm_l3_2_clkstctrl; /* 4a008800 */ - u32 pad045[1]; /* 4a008804 */ - u32 cm_l3_2_dynamicdep; /* 4a008808 */ - u32 pad046[5]; /* 4a00880c */ - u32 cm_l3_2_l3_2_clkctrl; /* 4a008820 */ - u32 pad047[1]; /* 4a008824 */ - u32 cm_l3_2_gpmc_clkctrl; /* 4a008828 */ - u32 pad048[1]; /* 4a00882c */ - u32 cm_l3_2_ocmc_ram_clkctrl; /* 4a008830 */ - u32 pad049[51]; /* 4a008834 */ - u32 cm_mpu_m3_clkstctrl; /* 4a008900 */ - u32 cm_mpu_m3_staticdep; /* 4a008904 */ - u32 cm_mpu_m3_dynamicdep; /* 4a008908 */ - u32 pad050[5]; /* 4a00890c */ - u32 cm_mpu_m3_mpu_m3_clkctrl; /* 4a008920 */ - u32 pad051[55]; /* 4a008924 */ - u32 cm_sdma_clkstctrl; /* 4a008a00 */ - u32 cm_sdma_staticdep; /* 4a008a04 */ - u32 cm_sdma_dynamicdep; /* 4a008a08 */ - u32 pad052[5]; /* 4a008a0c */ - u32 cm_sdma_sdma_clkctrl; /* 4a008a20 */ - u32 pad053[55]; /* 4a008a24 */ - u32 cm_memif_clkstctrl; /* 4a008b00 */ - u32 pad054[7]; /* 4a008b04 */ - u32 cm_memif_dmm_clkctrl; /* 4a008b20 */ - u32 pad055[1]; /* 4a008b24 */ - u32 cm_memif_emif_fw_clkctrl; /* 4a008b28 */ - u32 pad056[1]; /* 4a008b2c */ - u32 cm_memif_emif_1_clkctrl; /* 4a008b30 */ - u32 pad057[1]; /* 4a008b34 */ - u32 cm_memif_emif_2_clkctrl; /* 4a008b38 */ - u32 pad058[1]; /* 4a008b3c */ - u32 cm_memif_dll_clkctrl; /* 4a008b40 */ - u32 pad059[3]; /* 4a008b44 */ - u32 cm_memif_emif_h1_clkctrl; /* 4a008b50 */ - u32 pad060[1]; /* 4a008b54 */ - u32 cm_memif_emif_h2_clkctrl; /* 4a008b58 */ - u32 pad061[1]; /* 4a008b5c */ - u32 cm_memif_dll_h_clkctrl; /* 4a008b60 */ - u32 pad062[39]; /* 4a008b64 */ - u32 cm_c2c_clkstctrl; /* 4a008c00 */ - u32 cm_c2c_staticdep; /* 4a008c04 */ - u32 cm_c2c_dynamicdep; /* 4a008c08 */ - u32 pad063[5]; /* 4a008c0c */ - u32 cm_c2c_sad2d_clkctrl; /* 4a008c20 */ - u32 pad064[1]; /* 4a008c24 */ - u32 cm_c2c_modem_icr_clkctrl; /* 4a008c28 */ - u32 pad065[1]; /* 4a008c2c */ - u32 cm_c2c_sad2d_fw_clkctrl; /* 4a008c30 */ - u32 pad066[51]; /* 4a008c34 */ - u32 cm_l4cfg_clkstctrl; /* 4a008d00 */ - u32 pad067[1]; /* 4a008d04 */ - u32 cm_l4cfg_dynamicdep; /* 4a008d08 */ - u32 pad068[5]; /* 4a008d0c */ - u32 cm_l4cfg_l4_cfg_clkctrl; /* 4a008d20 */ - u32 pad069[1]; /* 4a008d24 */ - u32 cm_l4cfg_hw_sem_clkctrl; /* 4a008d28 */ - u32 pad070[1]; /* 4a008d2c */ - u32 cm_l4cfg_mailbox_clkctrl; /* 4a008d30 */ - u32 pad071[1]; /* 4a008d34 */ - u32 cm_l4cfg_sar_rom_clkctrl; /* 4a008d38 */ - u32 pad072[49]; /* 4a008d3c */ - u32 cm_l3instr_clkstctrl; /* 4a008e00 */ - u32 pad073[7]; /* 4a008e04 */ - u32 cm_l3instr_l3_3_clkctrl; /* 4a008e20 */ - u32 pad074[1]; /* 4a008e24 */ - u32 cm_l3instr_l3_instr_clkctrl; /* 4a008e28 */ - u32 pad075[5]; /* 4a008e2c */ - u32 cm_l3instr_intrconn_wp1_clkctrl; /* 4a008e40 */ - - - /* cm2.ivahd */ - u32 pad076[47]; /* 4a008e44 */ - u32 cm_ivahd_clkstctrl; /* 4a008f00 */ - u32 pad077[7]; /* 4a008f04 */ - u32 cm_ivahd_ivahd_clkctrl; /* 4a008f20 */ - u32 pad078[1]; /* 4a008f24 */ - u32 cm_ivahd_sl2_clkctrl; /* 4a008f28 */ - - /* cm2.cam */ - u32 pad079[53]; /* 4a008f2c */ - u32 cm_cam_clkstctrl; /* 4a009000 */ - u32 pad080[7]; /* 4a009004 */ - u32 cm_cam_iss_clkctrl; /* 4a009020 */ - u32 pad081[1]; /* 4a009024 */ - u32 cm_cam_fdif_clkctrl; /* 4a009028 */ - - /* cm2.dss */ - u32 pad082[53]; /* 4a00902c */ - u32 cm_dss_clkstctrl; /* 4a009100 */ - u32 pad083[7]; /* 4a009104 */ - u32 cm_dss_dss_clkctrl; /* 4a009120 */ - - /* cm2.sgx */ - u32 pad084[55]; /* 4a009124 */ - u32 cm_sgx_clkstctrl; /* 4a009200 */ - u32 pad085[7]; /* 4a009204 */ - u32 cm_sgx_sgx_clkctrl; /* 4a009220 */ - - /* cm2.l3init */ - u32 pad086[55]; /* 4a009224 */ - u32 cm_l3init_clkstctrl; /* 4a009300 */ - - /* cm2.l3init */ - u32 pad087[9]; /* 4a009304 */ - u32 cm_l3init_hsmmc1_clkctrl; /* 4a009328 */ - u32 pad088[1]; /* 4a00932c */ - u32 cm_l3init_hsmmc2_clkctrl; /* 4a009330 */ - u32 pad089[1]; /* 4a009334 */ - u32 cm_l3init_hsi_clkctrl; /* 4a009338 */ - u32 pad090[7]; /* 4a00933c */ - u32 cm_l3init_hsusbhost_clkctrl; /* 4a009358 */ - u32 pad091[1]; /* 4a00935c */ - u32 cm_l3init_hsusbotg_clkctrl; /* 4a009360 */ - u32 pad092[1]; /* 4a009364 */ - u32 cm_l3init_hsusbtll_clkctrl; /* 4a009368 */ - u32 pad093[3]; /* 4a00936c */ - u32 cm_l3init_p1500_clkctrl; /* 4a009378 */ - u32 pad094[21]; /* 4a00937c */ - u32 cm_l3init_fsusb_clkctrl; /* 4a0093d0 */ - u32 pad095[3]; /* 4a0093d4 */ - u32 cm_l3init_ocp2scp1_clkctrl; - - /* cm2.l4per */ - u32 pad096[7]; /* 4a0093e4 */ - u32 cm_l4per_clkstctrl; /* 4a009400 */ - u32 pad097[1]; /* 4a009404 */ - u32 cm_l4per_dynamicdep; /* 4a009408 */ - u32 pad098[5]; /* 4a00940c */ - u32 cm_l4per_adc_clkctrl; /* 4a009420 */ - u32 pad100[1]; /* 4a009424 */ - u32 cm_l4per_gptimer10_clkctrl; /* 4a009428 */ - u32 pad101[1]; /* 4a00942c */ - u32 cm_l4per_gptimer11_clkctrl; /* 4a009430 */ - u32 pad102[1]; /* 4a009434 */ - u32 cm_l4per_gptimer2_clkctrl; /* 4a009438 */ - u32 pad103[1]; /* 4a00943c */ - u32 cm_l4per_gptimer3_clkctrl; /* 4a009440 */ - u32 pad104[1]; /* 4a009444 */ - u32 cm_l4per_gptimer4_clkctrl; /* 4a009448 */ - u32 pad105[1]; /* 4a00944c */ - u32 cm_l4per_gptimer9_clkctrl; /* 4a009450 */ - u32 pad106[1]; /* 4a009454 */ - u32 cm_l4per_elm_clkctrl; /* 4a009458 */ - u32 pad107[1]; /* 4a00945c */ - u32 cm_l4per_gpio2_clkctrl; /* 4a009460 */ - u32 pad108[1]; /* 4a009464 */ - u32 cm_l4per_gpio3_clkctrl; /* 4a009468 */ - u32 pad109[1]; /* 4a00946c */ - u32 cm_l4per_gpio4_clkctrl; /* 4a009470 */ - u32 pad110[1]; /* 4a009474 */ - u32 cm_l4per_gpio5_clkctrl; /* 4a009478 */ - u32 pad111[1]; /* 4a00947c */ - u32 cm_l4per_gpio6_clkctrl; /* 4a009480 */ - u32 pad112[1]; /* 4a009484 */ - u32 cm_l4per_hdq1w_clkctrl; /* 4a009488 */ - u32 pad113[1]; /* 4a00948c */ - u32 cm_l4per_hecc1_clkctrl; /* 4a009490 */ - u32 pad114[1]; /* 4a009494 */ - u32 cm_l4per_hecc2_clkctrl; /* 4a009498 */ - u32 pad115[1]; /* 4a00949c */ - u32 cm_l4per_i2c1_clkctrl; /* 4a0094a0 */ - u32 pad116[1]; /* 4a0094a4 */ - u32 cm_l4per_i2c2_clkctrl; /* 4a0094a8 */ - u32 pad117[1]; /* 4a0094ac */ - u32 cm_l4per_i2c3_clkctrl; /* 4a0094b0 */ - u32 pad118[1]; /* 4a0094b4 */ - u32 cm_l4per_i2c4_clkctrl; /* 4a0094b8 */ - u32 pad119[1]; /* 4a0094bc */ - u32 cm_l4per_l4per_clkctrl; /* 4a0094c0 */ - u32 pad1191[3]; /* 4a0094c4 */ - u32 cm_l4per_mcasp2_clkctrl; /* 4a0094d0 */ - u32 pad120[1]; /* 4a0094d4 */ - u32 cm_l4per_mcasp3_clkctrl; /* 4a0094d8 */ - u32 pad121[3]; /* 4a0094dc */ - u32 cm_l4per_mgate_clkctrl; /* 4a0094e8 */ - u32 pad123[1]; /* 4a0094ec */ - u32 cm_l4per_mcspi1_clkctrl; /* 4a0094f0 */ - u32 pad124[1]; /* 4a0094f4 */ - u32 cm_l4per_mcspi2_clkctrl; /* 4a0094f8 */ - u32 pad125[1]; /* 4a0094fc */ - u32 cm_l4per_mcspi3_clkctrl; /* 4a009500 */ - u32 pad126[1]; /* 4a009504 */ - u32 cm_l4per_mcspi4_clkctrl; /* 4a009508 */ - u32 pad127[1]; /* 4a00950c */ - u32 cm_l4per_gpio7_clkctrl; /* 4a009510 */ - u32 pad1271[1]; /* 4a009514 */ - u32 cm_l4per_gpio8_clkctrl; /* 4a009518 */ - u32 pad1272[1]; /* 4a00951c */ - u32 cm_l4per_mmcsd3_clkctrl; /* 4a009520 */ - u32 pad128[1]; /* 4a009524 */ - u32 cm_l4per_mmcsd4_clkctrl; /* 4a009528 */ - u32 pad129[1]; /* 4a00952c */ - u32 cm_l4per_msprohg_clkctrl; /* 4a009530 */ - u32 pad130[1]; /* 4a009534 */ - u32 cm_l4per_slimbus2_clkctrl; /* 4a009538 */ - u32 pad131[1]; /* 4a00953c */ - u32 cm_l4per_uart1_clkctrl; /* 4a009540 */ - u32 pad132[1]; /* 4a009544 */ - u32 cm_l4per_uart2_clkctrl; /* 4a009548 */ - u32 pad133[1]; /* 4a00954c */ - u32 cm_l4per_uart3_clkctrl; /* 4a009550 */ - u32 pad134[1]; /* 4a009554 */ - u32 cm_l4per_uart4_clkctrl; /* 4a009558 */ - u32 pad135[1]; /* 4a00955c */ - u32 cm_l4per_mmcsd5_clkctrl; /* 4a009560 */ - u32 pad136[1]; /* 4a009564 */ - u32 cm_l4per_i2c5_clkctrl; /* 4a009568 */ - u32 pad1371[1]; /* 4a00956c */ - u32 cm_l4per_uart5_clkctrl; /* 4a009570 */ - u32 pad1372[1]; /* 4a009574 */ - u32 cm_l4per_uart6_clkctrl; /* 4a009578 */ - u32 pad1374[1]; /* 4a00957c */ - u32 cm_l4sec_clkstctrl; /* 4a009580 */ - u32 cm_l4sec_staticdep; /* 4a009584 */ - u32 cm_l4sec_dynamicdep; /* 4a009588 */ - u32 pad138[5]; /* 4a00958c */ - u32 cm_l4sec_aes1_clkctrl; /* 4a0095a0 */ - u32 pad139[1]; /* 4a0095a4 */ - u32 cm_l4sec_aes2_clkctrl; /* 4a0095a8 */ - u32 pad140[1]; /* 4a0095ac */ - u32 cm_l4sec_des3des_clkctrl; /* 4a0095b0 */ - u32 pad141[1]; /* 4a0095b4 */ - u32 cm_l4sec_pkaeip29_clkctrl; /* 4a0095b8 */ - u32 pad142[1]; /* 4a0095bc */ - u32 cm_l4sec_rng_clkctrl; /* 4a0095c0 */ - u32 pad143[1]; /* 4a0095c4 */ - u32 cm_l4sec_sha2md51_clkctrl; /* 4a0095c8 */ - u32 pad144[3]; /* 4a0095cc */ - u32 cm_l4sec_cryptodma_clkctrl; /* 4a0095d8 */ - u32 pad145[3660425]; /* 4a0095dc */ - - /* l4 wkup regs */ - u32 pad201[6211]; /* 4ae00000 */ - u32 cm_abe_pll_ref_clksel; /* 4ae0610c */ - u32 cm_sys_clksel; /* 4ae06110 */ - u32 pad202[1467]; /* 4ae06114 */ - u32 cm_wkup_clkstctrl; /* 4ae07800 */ - u32 pad203[7]; /* 4ae07804 */ - u32 cm_wkup_l4wkup_clkctrl; /* 4ae07820 */ - u32 pad204; /* 4ae07824 */ - u32 cm_wkup_wdtimer1_clkctrl; /* 4ae07828 */ - u32 pad205; /* 4ae0782c */ - u32 cm_wkup_wdtimer2_clkctrl; /* 4ae07830 */ - u32 pad206; /* 4ae07834 */ - u32 cm_wkup_gpio1_clkctrl; /* 4ae07838 */ - u32 pad207; /* 4ae0783c */ - u32 cm_wkup_gptimer1_clkctrl; /* 4ae07840 */ - u32 pad208; /* 4ae07844 */ - u32 cm_wkup_gptimer12_clkctrl; /* 4ae07848 */ - u32 pad209; /* 4ae0784c */ - u32 cm_wkup_synctimer_clkctrl; /* 4ae07850 */ - u32 pad210; /* 4ae07854 */ - u32 cm_wkup_usim_clkctrl; /* 4ae07858 */ - u32 pad211; /* 4ae0785c */ - u32 cm_wkup_sarram_clkctrl; /* 4ae07860 */ - u32 pad212[5]; /* 4ae07864 */ - u32 cm_wkup_keyboard_clkctrl; /* 4ae07878 */ - u32 pad213; /* 4ae0787c */ - u32 cm_wkup_rtc_clkctrl; /* 4ae07880 */ - u32 pad214; /* 4ae07884 */ - u32 cm_wkup_bandgap_clkctrl; /* 4ae07888 */ - u32 pad215[1]; /* 4ae0788c */ - u32 cm_wkupaon_scrm_clkctrl; /* 4ae07890 */ - u32 pad216[195]; - u32 prm_vc_val_bypass; /* 4ae07ba0 */ - u32 pad217[4]; - u32 prm_vc_cfg_i2c_mode; /* 4ae07bb4 */ - u32 prm_vc_cfg_i2c_clk; /* 4ae07bb8 */ - u32 pad218[2]; - u32 prm_sldo_core_setup; /* 4ae07bc4 */ - u32 prm_sldo_core_ctrl; /* 4ae07bc8 */ - u32 prm_sldo_mpu_setup; /* 4ae07bcc */ - u32 prm_sldo_mpu_ctrl; /* 4ae07bd0 */ - u32 prm_sldo_mm_setup; /* 4ae07bd4 */ - u32 prm_sldo_mm_ctrl; /* 4ae07bd8 */ -}; - /* DPLL register offsets */ #define CM_CLKMODE_DPLL 0 #define CM_IDLEST_DPLL 0x4 @@ -625,9 +176,9 @@ struct omap5_prcm_regs { /* CM_MPU_MPU_CLKCTRL */ #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 -#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24) -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25 -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) +#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24) +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 26 +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 26) /* CM_WKUPAON_SCRM_CLKCTRL */ #define OPTFCLKEN_SCRM_PER_SHIFT 9 @@ -635,6 +186,10 @@ struct omap5_prcm_regs { #define OPTFCLKEN_SCRM_CORE_SHIFT 8 #define OPTFCLKEN_SCRM_CORE_MASK (1 << 8) +/* CM_COREAON_IO_SRCOMP_CLKCTRL */ +#define OPTFCLKEN_SRCOMP_FCLK_SHIFT 8 +#define OPTFCLKEN_SRCOMP_FCLK_MASK (1 << 8) + /* Clock frequencies */ #define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 @@ -650,12 +205,25 @@ struct omap5_prcm_regs { #define SMPS_REG_ADDR_8_CORE 0x37 /* PALMAS VOLTAGE SETTINGS in mv for OPP_NOMINAL */ -#define VDD_MPU 1000 -#define VDD_MM 1000 +/* ES1.0 settings */ +#define VDD_MPU 1040 +#define VDD_MM 1040 #define VDD_CORE 1040 -#define VDD_MPU_5432 1150 -#define VDD_MM_5432 1150 -#define VDD_CORE_5432 1150 + +#define VDD_MPU_LOW 890 +#define VDD_MM_LOW 890 +#define VDD_CORE_LOW 890 + +/* ES2.0 settings */ +#define VDD_MPU_ES2 1060 +#define VDD_MM_ES2 1025 +#define VDD_CORE_ES2 1040 + +#define VDD_MPU_ES2_HIGH 1250 +#define VDD_MM_ES2_OD 1120 + +#define VDD_MPU_ES2_LOW 880 +#define VDD_MM_ES2_LOW 880 /* Standard offset is 0.5v expressed in uv */ #define PALMAS_SMPS_BASE_VOLT_UV 500000 @@ -683,59 +251,4 @@ struct omap5_prcm_regs { #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 -#define NUM_SYS_CLKS 7 - -struct dpll_regs { - u32 cm_clkmode_dpll; - u32 cm_idlest_dpll; - u32 cm_autoidle_dpll; - u32 cm_clksel_dpll; - u32 cm_div_m2_dpll; - u32 cm_div_m3_dpll; - u32 cm_div_h11_dpll; - u32 cm_div_h12_dpll; - u32 cm_div_h13_dpll; - u32 cm_div_h14_dpll; - u32 reserved[3]; - u32 cm_div_h22_dpll; - u32 cm_div_h23_dpll; -}; - -/* DPLL parameter table */ -struct dpll_params { - u32 m; - u32 n; - s8 m2; - s8 m3; - s8 h11; - s8 h12; - s8 h13; - s8 h14; - s8 h22; - s8 h23; -}; - -extern struct omap5_prcm_regs *const prcm; -extern const u32 sys_clk_array[8]; - -void scale_vcores(void); -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv); -u32 get_offset_code(u32 offset); -u32 omap_ddr_clk(void); -void do_scale_vcore(u32 vcore_reg, u32 volt_mv); -void setup_post_dividers(u32 *const base, const struct dpll_params *params); -u32 get_sys_clk_index(void); -void enable_basic_clocks(void); -void enable_non_essential_clocks(void); -void enable_basic_uboot_clocks(void); -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, - u8 wait_for_enable); -const struct dpll_params *get_mpu_dpll_params(void); -const struct dpll_params *get_core_dpll_params(void); -const struct dpll_params *get_per_dpll_params(void); -const struct dpll_params *get_iva_dpll_params(void); -const struct dpll_params *get_usb_dpll_params(void); -const struct dpll_params *get_abe_dpll_params(void); #endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/mmc_host_def.h b/arch/arm/include/asm/arch-omap5/mmc_host_def.h index 2114046e71..9c8ccb6c83 100644 --- a/arch/arm/include/asm/arch-omap5/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap5/mmc_host_def.h @@ -25,6 +25,8 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* * OMAP HSMMC register definitions */ @@ -33,142 +35,4 @@ #define OMAP_HSMMC2_BASE 0x480B4100 #define OMAP_HSMMC3_BASE 0x480AD100 -struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -}; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h new file mode 100644 index 0000000000..55e9de6041 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -0,0 +1,344 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated + * + * Nishant Kamat <nskamat@ti.com> + * Lokesh Vutla <lokeshvutla@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MUX_DRA7XX_H_ +#define _MUX_DRA7XX_H_ + +#include <asm/types.h> + +#define IEN (1 << 18) +#define IDIS (0 << 18) + +#define PTU (3 << 16) +#define PTD (1 << 16) +#define PEN (1 << 16) +#define PDIS (0 << 16) + +#define WKEN (1 << 24) +#define WKDIS (0 << 24) + +#define M0 0 +#define M1 1 +#define M2 2 +#define M3 3 +#define M4 4 +#define M5 5 +#define M6 6 +#define M7 7 +#define M8 8 +#define M9 9 +#define M10 10 +#define M11 11 +#define M12 12 +#define M13 13 +#define M14 14 +#define M15 15 + +#define SAFE_MODE M15 + +#define GPMC_AD0 0x000 +#define GPMC_AD1 0x004 +#define GPMC_AD2 0x008 +#define GPMC_AD3 0x00C +#define GPMC_AD4 0x010 +#define GPMC_AD5 0x014 +#define GPMC_AD6 0x018 +#define GPMC_AD7 0x01C +#define GPMC_AD8 0x020 +#define GPMC_AD9 0x024 +#define GPMC_AD10 0x028 +#define GPMC_AD11 0x02C +#define GPMC_AD12 0x030 +#define GPMC_AD13 0x034 +#define GPMC_AD14 0x038 +#define GPMC_AD15 0x03C +#define GPMC_A0 0x040 +#define GPMC_A1 0x044 +#define GPMC_A2 0x048 +#define GPMC_A3 0x04C +#define GPMC_A4 0x050 +#define GPMC_A5 0x054 +#define GPMC_A6 0x058 +#define GPMC_A7 0x05C +#define GPMC_A8 0x060 +#define GPMC_A9 0x064 +#define GPMC_A10 0x068 +#define GPMC_A11 0x06C +#define GPMC_A12 0x070 +#define GPMC_A13 0x074 +#define GPMC_A14 0x078 +#define GPMC_A15 0x07C +#define GPMC_A16 0x080 +#define GPMC_A17 0x084 +#define GPMC_A18 0x088 +#define GPMC_A19 0x08C +#define GPMC_A20 0x090 +#define GPMC_A21 0x094 +#define GPMC_A22 0x098 +#define GPMC_A23 0x09C +#define GPMC_A24 0x0A0 +#define GPMC_A25 0x0A4 +#define GPMC_A26 0x0A8 +#define GPMC_A27 0x0AC +#define GPMC_CS1 0x0B0 +#define GPMC_CS0 0x0B4 +#define GPMC_CS2 0x0B8 +#define GPMC_CS3 0x0BC +#define GPMC_CLK 0x0C0 +#define GPMC_ADVN_ALE 0x0C4 +#define GPMC_OEN_REN 0x0C8 +#define GPMC_WEN 0x0CC +#define GPMC_BEN0 0x0D0 +#define GPMC_BEN1 0x0D4 +#define GPMC_WAIT0 0x0D8 +#define VIN1A_CLK0 0x0DC +#define VIN1B_CLK1 0x0E0 +#define VIN1A_DE0 0x0E4 +#define VIN1A_FLD0 0x0E8 +#define VIN1A_HSYNC0 0x0EC +#define VIN1A_VSYNC0 0x0F0 +#define VIN1A_D0 0x0F4 +#define VIN1A_D1 0x0F8 +#define VIN1A_D2 0x0FC +#define VIN1A_D3 0x100 +#define VIN1A_D4 0x104 +#define VIN1A_D5 0x108 +#define VIN1A_D6 0x10C +#define VIN1A_D7 0x110 +#define VIN1A_D8 0x114 +#define VIN1A_D9 0x118 +#define VIN1A_D10 0x11C +#define VIN1A_D11 0x120 +#define VIN1A_D12 0x124 +#define VIN1A_D13 0x128 +#define VIN1A_D14 0x12C +#define VIN1A_D15 0x130 +#define VIN1A_D16 0x134 +#define VIN1A_D17 0x138 +#define VIN1A_D18 0x13C +#define VIN1A_D19 0x140 +#define VIN1A_D20 0x144 +#define VIN1A_D21 0x148 +#define VIN1A_D22 0x14C +#define VIN1A_D23 0x150 +#define VIN2A_CLK0 0x154 +#define VIN2A_DE0 0x158 +#define VIN2A_FLD0 0x15C +#define VIN2A_HSYNC0 0x160 +#define VIN2A_VSYNC0 0x164 +#define VIN2A_D0 0x168 +#define VIN2A_D1 0x16C +#define VIN2A_D2 0x170 +#define VIN2A_D3 0x174 +#define VIN2A_D4 0x178 +#define VIN2A_D5 0x17C +#define VIN2A_D6 0x180 +#define VIN2A_D7 0x184 +#define VIN2A_D8 0x188 +#define VIN2A_D9 0x18C +#define VIN2A_D10 0x190 +#define VIN2A_D11 0x194 +#define VIN2A_D12 0x198 +#define VIN2A_D13 0x19C +#define VIN2A_D14 0x1A0 +#define VIN2A_D15 0x1A4 +#define VIN2A_D16 0x1A8 +#define VIN2A_D17 0x1AC +#define VIN2A_D18 0x1B0 +#define VIN2A_D19 0x1B4 +#define VIN2A_D20 0x1B8 +#define VIN2A_D21 0x1BC +#define VIN2A_D22 0x1C0 +#define VIN2A_D23 0x1C4 +#define VOUT1_CLK 0x1C8 +#define VOUT1_DE 0x1CC +#define VOUT1_FLD 0x1D0 +#define VOUT1_HSYNC 0x1D4 +#define VOUT1_VSYNC 0x1D8 +#define VOUT1_D0 0x1DC +#define VOUT1_D1 0x1E0 +#define VOUT1_D2 0x1E4 +#define VOUT1_D3 0x1E8 +#define VOUT1_D4 0x1EC +#define VOUT1_D5 0x1F0 +#define VOUT1_D6 0x1F4 +#define VOUT1_D7 0x1F8 +#define VOUT1_D8 0x1FC +#define VOUT1_D9 0x200 +#define VOUT1_D10 0x204 +#define VOUT1_D11 0x208 +#define VOUT1_D12 0x20C +#define VOUT1_D13 0x210 +#define VOUT1_D14 0x214 +#define VOUT1_D15 0x218 +#define VOUT1_D16 0x21C +#define VOUT1_D17 0x220 +#define VOUT1_D18 0x224 +#define VOUT1_D19 0x228 +#define VOUT1_D20 0x22C +#define VOUT1_D21 0x230 +#define VOUT1_D22 0x234 +#define VOUT1_D23 0x238 +#define MDIO_MCLK 0x23C +#define MDIO_D 0x240 +#define RMII_MHZ_50_CLK 0x244 +#define UART3_RXD 0x248 +#define UART3_TXD 0x24C +#define RGMII0_TXC 0x250 +#define RGMII0_TXCTL 0x254 +#define RGMII0_TXD3 0x258 +#define RGMII0_TXD2 0x25C +#define RGMII0_TXD1 0x260 +#define RGMII0_TXD0 0x264 +#define RGMII0_RXC 0x268 +#define RGMII0_RXCTL 0x26C +#define RGMII0_RXD3 0x270 +#define RGMII0_RXD2 0x274 +#define RGMII0_RXD1 0x278 +#define RGMII0_RXD0 0x27C +#define USB1_DRVVBUS 0x280 +#define USB2_DRVVBUS 0x284 +#define GPIO6_14 0x288 +#define GPIO6_15 0x28C +#define GPIO6_16 0x290 +#define XREF_CLK0 0x294 +#define XREF_CLK1 0x298 +#define XREF_CLK2 0x29C +#define XREF_CLK3 0x2A0 +#define MCASP1_ACLKX 0x2A4 +#define MCASP1_FSX 0x2A8 +#define MCASP1_ACLKR 0x2AC +#define MCASP1_FSR 0x2B0 +#define MCASP1_AXR0 0x2B4 +#define MCASP1_AXR1 0x2B8 +#define MCASP1_AXR2 0x2BC +#define MCASP1_AXR3 0x2C0 +#define MCASP1_AXR4 0x2C4 +#define MCASP1_AXR5 0x2C8 +#define MCASP1_AXR6 0x2CC +#define MCASP1_AXR7 0x2D0 +#define MCASP1_AXR8 0x2D4 +#define MCASP1_AXR9 0x2D8 +#define MCASP1_AXR10 0x2DC +#define MCASP1_AXR11 0x2E0 +#define MCASP1_AXR12 0x2E4 +#define MCASP1_AXR13 0x2E8 +#define MCASP1_AXR14 0x2EC +#define MCASP1_AXR15 0x2F0 +#define MCASP2_ACLKX 0x2F4 +#define MCASP2_FSX 0x2F8 +#define MCASP2_ACLKR 0x2FC +#define MCASP2_FSR 0x300 +#define MCASP2_AXR0 0x304 +#define MCASP2_AXR1 0x308 +#define MCASP2_AXR2 0x30C +#define MCASP2_AXR3 0x310 +#define MCASP2_AXR4 0x314 +#define MCASP2_AXR5 0x318 +#define MCASP2_AXR6 0x31C +#define MCASP2_AXR7 0x320 +#define MCASP3_ACLKX 0x324 +#define MCASP3_FSX 0x328 +#define MCASP3_AXR0 0x32C +#define MCASP3_AXR1 0x330 +#define MCASP4_ACLKX 0x334 +#define MCASP4_FSX 0x338 +#define MCASP4_AXR0 0x33C +#define MCASP4_AXR1 0x340 +#define MCASP5_ACLKX 0x344 +#define MCASP5_FSX 0x348 +#define MCASP5_AXR0 0x34C +#define MCASP5_AXR1 0x350 +#define MMC1_CLK 0x354 +#define MMC1_CMD 0x358 +#define MMC1_DAT0 0x35C +#define MMC1_DAT1 0x360 +#define MMC1_DAT2 0x364 +#define MMC1_DAT3 0x368 +#define MMC1_SDCD 0x36C +#define MMC1_SDWP 0x370 +#define GPIO6_10 0x374 +#define GPIO6_11 0x378 +#define MMC3_CLK 0x37C +#define MMC3_CMD 0x380 +#define MMC3_DAT0 0x384 +#define MMC3_DAT1 0x388 +#define MMC3_DAT2 0x38C +#define MMC3_DAT3 0x390 +#define MMC3_DAT4 0x394 +#define MMC3_DAT5 0x398 +#define MMC3_DAT6 0x39C +#define MMC3_DAT7 0x3A0 +#define SPI1_SCLK 0x3A4 +#define SPI1_D1 0x3A8 +#define SPI1_D0 0x3AC +#define SPI1_CS0 0x3B0 +#define SPI1_CS1 0x3B4 +#define SPI1_CS2 0x3B8 +#define SPI1_CS3 0x3BC +#define SPI2_SCLK 0x3C0 +#define SPI2_D1 0x3C4 +#define SPI2_D0 0x3C8 +#define SPI2_CS0 0x3CC +#define DCAN1_TX 0x3D0 +#define DCAN1_RX 0x3D4 +#define DCAN2_TX 0x3D8 +#define DCAN2_RX 0x3DC +#define UART1_RXD 0x3E0 +#define UART1_TXD 0x3E4 +#define UART1_CTSN 0x3E8 +#define UART1_RTSN 0x3EC +#define UART2_RXD 0x3F0 +#define UART2_TXD 0x3F4 +#define UART2_CTSN 0x3F8 +#define UART2_RTSN 0x3FC +#define I2C1_SDA 0x400 +#define I2C1_SCL 0x404 +#define I2C2_SDA 0x408 +#define I2C2_SCL 0x40C +#define I2C3_SDA 0x410 +#define I2C3_SCL 0x414 +#define WAKEUP0 0x418 +#define WAKEUP1 0x41C +#define WAKEUP2 0x420 +#define WAKEUP3 0x424 +#define ON_OFF 0x428 +#define RTC_PORZ 0x42C +#define TMS 0x430 +#define TDI 0x434 +#define TDO 0x438 +#define TCLK 0x43C +#define TRSTN 0x440 +#define RTCK 0x444 +#define EMU0 0x448 +#define EMU1 0x44C +#define EMU2 0x450 +#define EMU3 0x454 +#define EMU4 0x458 +#define RESETN 0x45C +#define NMIN 0x460 +#define RSTOUTN 0x464 + +#endif /* _MUX_DRA7XX_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/mux_omap5.h b/arch/arm/include/asm/arch-omap5/mux_omap5.h index 4a6ed8b455..34b0dbd063 100644 --- a/arch/arm/include/asm/arch-omap5/mux_omap5.h +++ b/arch/arm/include/asm/arch-omap5/mux_omap5.h @@ -28,14 +28,6 @@ #include <asm/types.h> -struct pad_conf_entry { - - u16 offset; - - u16 val; - -}; - #ifdef CONFIG_OFF_PADCONF #define OFF_PD (1 << 12) #define OFF_PU (3 << 12) diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 9dce49ac4b..b632635d3e 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -57,7 +57,10 @@ /* To be verified */ #define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F +#define OMAP5430_CONTROL_ID_CODE_ES2_0 0x1B94202F #define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F +#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F +#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F /* STD_FUSE_PROD_ID_1 */ #define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218) @@ -131,87 +134,6 @@ struct s32ktimer { #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) #define DEVICE_GP 0x3 -struct omap_sys_ctrl_regs { - u32 pad0[77]; /* 0x4A002000 */ - u32 control_status; /* 0x4A002134 */ - u32 pad1[794]; /* 0x4A002138 */ - u32 control_paconf_global; /* 0x4A002DA0 */ - u32 control_paconf_mode; /* 0x4A002DA4 */ - u32 control_smart1io_padconf_0; /* 0x4A002DA8 */ - u32 control_smart1io_padconf_1; /* 0x4A002DAC */ - u32 control_smart1io_padconf_2; /* 0x4A002DB0 */ - u32 control_smart2io_padconf_0; /* 0x4A002DB4 */ - u32 control_smart2io_padconf_1; /* 0x4A002DB8 */ - u32 control_smart2io_padconf_2; /* 0x4A002DBC */ - u32 control_smart3io_padconf_0; /* 0x4A002DC0 */ - u32 control_smart3io_padconf_1; /* 0x4A002DC4 */ - u32 pad2[14]; - u32 control_pbias; /* 0x4A002E00 */ - u32 control_i2c_0; /* 0x4A002E04 */ - u32 control_camera_rx; /* 0x4A002E08 */ - u32 control_hdmi_tx_phy; /* 0x4A002E0C */ - u32 control_uniportm; /* 0x4A002E10 */ - u32 control_dsiphy; /* 0x4A002E14 */ - u32 control_mcbsplp; /* 0x4A002E18 */ - u32 control_usb2phycore; /* 0x4A002E1C */ - u32 control_hdmi_1; /*0x4A002E20*/ - u32 control_hsi; /*0x4A002E24*/ - u32 pad3[2]; - u32 control_ddr3ch1_0; /*0x4A002E30*/ - u32 control_ddr3ch2_0; /*0x4A002E34*/ - u32 control_ddrch1_0; /*0x4A002E38*/ - u32 control_ddrch1_1; /*0x4A002E3C*/ - u32 control_ddrch2_0; /*0x4A002E40*/ - u32 control_ddrch2_1; /*0x4A002E44*/ - u32 control_lpddr2ch1_0; /*0x4A002E48*/ - u32 control_lpddr2ch1_1; /*0x4A002E4C*/ - u32 control_ddrio_0; /*0x4A002E50*/ - u32 control_ddrio_1; /*0x4A002E54*/ - u32 control_ddrio_2; /*0x4A002E58*/ - u32 control_hyst_1; /*0x4A002E5C*/ - u32 control_usbb_hsic_control; /*0x4A002E60*/ - u32 control_c2c; /*0x4A002E64*/ - u32 control_core_control_spare_rw; /*0x4A002E68*/ - u32 control_core_control_spare_r; /*0x4A002E6C*/ - u32 control_core_control_spare_r_c0; /*0x4A002E70*/ - u32 control_srcomp_north_side; /*0x4A002E74*/ - u32 control_srcomp_south_side; /*0x4A002E78*/ - u32 control_srcomp_east_side; /*0x4A002E7C*/ - u32 control_srcomp_west_side; /*0x4A002E80*/ - u32 control_srcomp_code_latch; /*0x4A002E84*/ - u32 pad4[3679394]; - u32 control_port_emif1_sdram_config; /*0x4AE0C110*/ - u32 control_port_emif1_lpddr2_nvm_config; /*0x4AE0C114*/ - u32 control_port_emif2_sdram_config; /*0x4AE0C118*/ - u32 pad5[10]; - u32 control_emif1_sdram_config_ext; /* 0x4AE0C144 */ - u32 control_emif2_sdram_config_ext; /* 0x4AE0C148 */ - u32 pad6[789]; - u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */ - u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */ - u32 control_padconf_mode; /* 0x4AE0CDA8 */ - u32 control_xtal_oscillator; /* 0x4AE0CDAC */ - u32 control_i2c_2; /* 0x4AE0CDB0 */ - u32 control_ckobuffer; /* 0x4AE0CDB4 */ - u32 control_wkup_control_spare_rw; /* 0x4AE0CDB8 */ - u32 control_wkup_control_spare_r; /* 0x4AE0CDBC */ - u32 control_wkup_control_spare_r_c0; /* 0x4AE0CDC0 */ - u32 control_srcomp_east_side_wkup; /* 0x4AE0CDC4 */ - u32 control_efuse_1; /* 0x4AE0CDC8 */ - u32 control_efuse_2; /* 0x4AE0CDCC */ - u32 control_efuse_3; /* 0x4AE0CDD0 */ - u32 control_efuse_4; /* 0x4AE0CDD4 */ - u32 control_efuse_5; /* 0x4AE0CDD8 */ - u32 control_efuse_6; /* 0x4AE0CDDC */ - u32 control_efuse_7; /* 0x4AE0CDE0 */ - u32 control_efuse_8; /* 0x4AE0CDE4 */ - u32 control_efuse_9; /* 0x4AE0CDE8 */ - u32 control_efuse_10; /* 0x4AE0CDEC */ - u32 control_efuse_11; /* 0x4AE0CDF0 */ - u32 control_efuse_12; /* 0x4AE0CDF4 */ - u32 control_efuse_13; /* 0x4AE0CDF8 */ -}; - /* Output impedance control */ #define ds_120_ohm 0x0 #define ds_60_ohm 0x1 @@ -247,6 +169,12 @@ struct omap_sys_ctrl_regs { #define DDR_IO_1_VREF_CELLS_DDR3_VALUE 0xBC6318DC #define DDR_IO_2_VREF_CELLS_DDR3_VALUE 0x0 +#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x7C7C7C7C +#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64656465 +#define DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2 0xBAE8C631 +#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xB46318D8 +#define DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2 0x84210000 + #define EFUSE_1 0x45145100 #define EFUSE_2 0x45145100 #define EFUSE_3 0x45145100 @@ -271,7 +199,11 @@ struct omap_sys_ctrl_regs { #define OMAP5_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) #define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) -#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C) +#define OMAP5_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20) +#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24) /* Silicon revisions */ #define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF @@ -298,7 +230,26 @@ struct omap_sys_ctrl_regs { #define CH_FLAGS_CHFLASH (0x1 << 2) #define CH_FLAGS_CHMMCSD (0x1 << 3) +/* CONTROL_SRCOMP_XXX_SIDE */ +#define OVERRIDE_XS_SHIFT 30 +#define OVERRIDE_XS_MASK (1 << 30) +#define SRCODE_READ_XS_SHIFT 12 +#define SRCODE_READ_XS_MASK (0xff << 12) +#define PWRDWN_XS_SHIFT 11 +#define PWRDWN_XS_MASK (1 << 11) +#define DIVIDE_FACTOR_XS_SHIFT 4 +#define DIVIDE_FACTOR_XS_MASK (0x7f << 4) +#define MULTIPLY_FACTOR_XS_SHIFT 1 +#define MULTIPLY_FACTOR_XS_MASK (0x7 << 1) +#define SRCODE_OVERRIDE_SEL_XS_SHIFT 0 +#define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0) + #ifndef __ASSEMBLY__ +struct srcomp_params { + s8 divide_factor; + s8 multiply_factor; +}; + struct omap_boot_parameters { char *boot_message; unsigned int mem_boot_descriptor; @@ -306,5 +257,15 @@ struct omap_boot_parameters { unsigned char reset_reason; unsigned char ch_flags; }; + +struct ctrl_ioregs { + u32 ctrl_ddrch; + u32 ctrl_lpddr2ch; + u32 ctrl_ddr3ch; + u32 ctrl_ddrio_0; + u32 ctrl_ddrio_1; + u32 ctrl_ddrio_2; + u32 ctrl_emif_sdram_config_ext; +}; #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index d125c61f4c..323cd63551 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -27,7 +27,7 @@ #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 #define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_ONENAND 4 #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 7 diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 72e9df7881..e66ab44341 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -25,9 +25,13 @@ #include <asm/io.h> #include <asm/arch/clocks.h> #include <asm/omap_common.h> -#include <asm/arch/mux_omap5.h> #include <asm/arch/clocks.h> +struct pad_conf_entry { + u32 offset; + u32 val; +}; + struct omap_sysinfo { char *board_string; }; @@ -44,7 +48,7 @@ u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); void setup_clocks_for_console(void); void prcm_init(void); -void bypass_dpll(u32 *const base); +void bypass_dpll(u32 const base); void freq_update_core(void); u32 get_sys_clk_freq(void); u32 omap5_ddr_clk(void); @@ -58,6 +62,8 @@ void omap_vc_init(u16 speed_khz); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); +void get_ioregs(const struct ctrl_ioregs **regs); +void srcomp_enable(void); /* * This is used to verify if the configuration header diff --git a/arch/arm/include/asm/arch-tegra/mmc.h b/arch/arm/include/asm/arch-tegra/mmc.h index 5c95047998..71ad407511 100644 --- a/arch/arm/include/asm/arch-tegra/mmc.h +++ b/arch/arm/include/asm/arch-tegra/mmc.h @@ -22,6 +22,6 @@ #ifndef _TEGRA_MMC_H_ #define _TEGRA_MMC_H_ -int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio); +void tegra_mmc_init(void); #endif /* _TEGRA_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h index 2650744718..853e59bb6e 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h +++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h @@ -105,6 +105,7 @@ struct i2c_ctlr { u32 sl_delay_count; /* 3C: I2C_I2C_SL_DELAY_COUNT */ u32 reserved_2[4]; /* 40: */ struct i2c_control control; /* 50 ~ 68 */ + u32 clk_div; /* 6C: I2C_I2C_CLOCK_DIVISOR */ }; /* bit fields definitions for IO Packet Header 1 format */ @@ -154,6 +155,11 @@ struct i2c_ctlr { #define I2C_INT_ARBITRATION_LOST_SHIFT 2 #define I2C_INT_ARBITRATION_LOST_MASK (1 << I2C_INT_ARBITRATION_LOST_SHIFT) +/* I2C_CLK_DIVISOR_REGISTER */ +#define CLK_DIV_STD_FAST_MODE 0x19 +#define CLK_DIV_HS_MODE 1 +#define CLK_MULT_STD_FAST_MODE 8 + /** * Returns the bus number of the DVC controller * diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h index dd746cae0d..2a3f830cc5 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h +++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h @@ -22,10 +22,9 @@ #ifndef __TEGRA_MMC_H_ #define __TEGRA_MMC_H_ -#define TEGRA_SDMMC1_BASE 0xC8000000 -#define TEGRA_SDMMC2_BASE 0xC8000200 -#define TEGRA_SDMMC3_BASE 0xC8000400 -#define TEGRA_SDMMC4_BASE 0xC8000600 +#include <fdtdec.h> + +#define MAX_HOSTS 4 /* Max number of 'hosts'/controllers */ #ifndef __ASSEMBLY__ struct tegra_mmc { @@ -62,12 +61,30 @@ struct tegra_mmc { unsigned char admaerr; /* offset 54h */ unsigned char res4[3]; /* RESERVED, offset 55h-57h */ unsigned long admaaddr; /* offset 58h-5Fh */ - unsigned char res5[0x9c]; /* RESERVED, offset 60h-FBh */ + unsigned char res5[0xa0]; /* RESERVED, offset 60h-FBh */ unsigned short slotintstatus; /* offset FCh */ unsigned short hcver; /* HOST Version */ - unsigned char res6[0x100]; /* RESERVED, offset 100h-1FFh */ + unsigned int venclkctl; /* _VENDOR_CLOCK_CNTRL_0, 100h */ + unsigned int venspictl; /* _VENDOR_SPI_CNTRL_0, 104h */ + unsigned int venspiintsts; /* _VENDOR_SPI_INT_STATUS_0, 108h */ + unsigned int venceatactl; /* _VENDOR_CEATA_CNTRL_0, 10Ch */ + unsigned int venbootctl; /* _VENDOR_BOOT_CNTRL_0, 110h */ + unsigned int venbootacktout; /* _VENDOR_BOOT_ACK_TIMEOUT, 114h */ + unsigned int venbootdattout; /* _VENDOR_BOOT_DAT_TIMEOUT, 118h */ + unsigned int vendebouncecnt; /* _VENDOR_DEBOUNCE_COUNT_0, 11Ch */ + unsigned int venmiscctl; /* _VENDOR_MISC_CNTRL_0, 120h */ + unsigned int res6[47]; /* 0x124 ~ 0x1DC */ + unsigned int sdmemcmppadctl; /* _SDMEMCOMPPADCTRL_0, 1E0h */ + unsigned int autocalcfg; /* _AUTO_CAL_CONFIG_0, 1E4h */ + unsigned int autocalintval; /* _AUTO_CAL_INTERVAL_0, 1E8h */ + unsigned int autocalsts; /* _AUTO_CAL_STATUS_0, 1ECh */ }; +#define TEGRA_MMC_PWRCTL_SD_BUS_POWER (1 << 0) +#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8 (5 << 1) +#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0 (6 << 1) +#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3 (7 << 1) + #define TEGRA_MMC_HOSTCTL_DMASEL_MASK (3 << 3) #define TEGRA_MMC_HOSTCTL_DMASEL_SDMA (0 << 3) #define TEGRA_MMC_HOSTCTL_DMASEL_ADMA2_32BIT (2 << 3) @@ -117,15 +134,26 @@ struct tegra_mmc { #define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE (1 << 1) +/* SDMMC1/3 settings from section 24.6 of T30 TRM */ +#define MEMCOMP_PADCTRL_VREF 7 +#define AUTO_CAL_ENABLED (1 << 29) +#define AUTO_CAL_PD_OFFSET (0x70 << 8) +#define AUTO_CAL_PU_OFFSET (0x62 << 0) + struct mmc_host { struct tegra_mmc *reg; + int id; /* device id/number, 0-3 */ + int enabled; /* 1 to enable, 0 to disable */ + int width; /* Bus Width, 1, 4 or 8 */ + enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */ + struct fdt_gpio_state cd_gpio; /* Change Detect GPIO */ + struct fdt_gpio_state pwr_gpio; /* Power GPIO */ + struct fdt_gpio_state wp_gpio; /* Write Protect GPIO */ unsigned int version; /* SDHCI spec. version */ unsigned int clock; /* Current clock (MHz) */ - unsigned int base; /* Base address, SDMMC1/2/3/4 */ - enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */ - int pwr_gpio; /* Power GPIO */ - int cd_gpio; /* Change Detect GPIO */ }; +void pad_init_mmc(struct mmc_host *host); + #endif /* __ASSEMBLY__ */ #endif /* __TEGRA_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra/usb.h index fdbd127e6c..ef6c089be2 100644 --- a/arch/arm/include/asm/arch-tegra20/usb.h +++ b/arch/arm/include/asm/arch-tegra/usb.h @@ -243,29 +243,7 @@ struct usb_ctlr { #define VBUS_VLD_STS (1 << 26) -/* Change the USB host port into host mode */ -void usb_set_host_mode(void); - /* Setup USB on the board */ int board_usb_init(const void *blob); -/** - * Start up the given port number (ports are numbered from 0 on each board). - * This returns values for the appropriate hccr and hcor addresses to use for - * USB EHCI operations. - * - * @param portnum port number to start - * @param hccr returns start address of EHCI HCCR registers - * @param hcor returns start address of EHCI HCOR registers - * @return 0 if ok, -1 on error (generally invalid port number) - */ -int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor); - -/** - * Stop the current port - * - * @return 0 if ok, -1 if no port was active - */ -int tegrausb_stop_port(int portnum); - #endif /* _TEGRA_USB_H_ */ diff --git a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h index c538bdd052..1ef1a1484d 100644 --- a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h +++ b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h @@ -27,7 +27,7 @@ struct apb_misc_gp_ctlr { u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */ u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */ u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */ - u32 aocfg2; /* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */ + u32 aocfg2; /* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */ u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */ u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */ u32 atcfg3; /* 0x78: APB_MISC_GP_ATCFG3PADCTRL */ @@ -35,25 +35,43 @@ struct apb_misc_gp_ctlr { u32 atcfg5; /* 0x80: APB_MISC_GP_ATCFG5PADCTRL */ u32 cdev1cfg; /* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */ u32 cdev2cfg; /* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */ - u32 csuscfg; /* 0x8C: APB_MISC_GP_CSUSCFGPADCTRL */ + u32 reserved1; /* 0x8C: */ u32 dap1cfg; /* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */ u32 dap2cfg; /* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */ u32 dap3cfg; /* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */ u32 dap4cfg; /* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */ u32 dbgcfg; /* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */ - u32 lcdcfg1; /* 0xA4: APB_MISC_GP_LCDCFG1PADCTRL */ - u32 lcdcfg2; /* 0xA8: APB_MISC_GP_LCDCFG2PADCTRL */ - u32 sdio2cfg; /* 0xAC: APB_MISC_GP_SDIO2CFGPADCTRL */ + u32 reserved2[3]; /* 0xA4 - 0xAC: */ u32 sdio3cfg; /* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */ u32 spicfg; /* 0xB4: APB_MISC_GP_SPICFGPADCTRL */ u32 uaacfg; /* 0xB8: APB_MISC_GP_UAACFGPADCTRL */ u32 uabcfg; /* 0xBC: APB_MISC_GP_UABCFGPADCTRL */ u32 uart2cfg; /* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */ u32 uart3cfg; /* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */ - u32 vicfg1; /* 0xC8: APB_MISC_GP_VICFG1PADCTRL */ - u32 vivttgen; /* 0xCC: APB_MISC_GP_VIVTTGENPADCTRL */ - u32 reserved1[7]; /* 0xD0-0xE8: */ + u32 reserved3[9]; /* 0xC8-0xE8: */ u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */ + u32 reserved4[3]; /* 0xF0-0xF8: */ + u32 ddccfg; /* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */ + u32 gmacfg; /* 0x100: APB_MISC_GP_GMACFGPADCTRL */ + u32 reserved5[3]; /* 0x104-0x10C: */ + u32 gmecfg; /* 0x110: APB_MISC_GP_GMECFGPADCTRL */ + u32 gmfcfg; /* 0x114: APB_MISC_GP_GMFCFGPADCTRL */ + u32 gmgcfg; /* 0x118: APB_MISC_GP_GMGCFGPADCTRL */ + u32 gmhcfg; /* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */ + u32 owrcfg; /* 0x120: APB_MISC_GP_OWRCFGPADCTRL */ + u32 uadcfg; /* 0x124: APB_MISC_GP_UADCFGPADCTRL */ + u32 reserved6; /* 0x128: */ + u32 dev3cfg; /* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */ + u32 reserved7[2]; /* 0x130 - 0x134: */ + u32 ceccfg; /* 0x138: APB_MISC_GP_CECCFGPADCTRL */ + u32 reserved8[22]; /* 0x13C - 0x190: */ + u32 atcfg6; /* 0x194: APB_MISC_GP_ATCFG6PADCTRL */ + u32 dap5cfg; /* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */ + u32 vbuscfg; /* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */ + u32 aocfg3; /* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */ + u32 hvccfg0; /* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */ + u32 sdio4cfg; /* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */ + u32 aocfg0; /* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */ }; #endif /* _TEGRA114_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h index fd2293039d..9c22c08b6e 100644 --- a/arch/arm/include/asm/arch-tegra114/pinmux.h +++ b/arch/arm/include/asm/arch-tegra114/pinmux.h @@ -50,72 +50,12 @@ enum pmux_pingrp { PINGRP_SDMMC1_DAT2, PINGRP_SDMMC1_DAT1, PINGRP_SDMMC1_DAT0, - PINGRP_GPIO_PV2, - PINGRP_GPIO_PV3, - PINGRP_CLK2_OUT, + PINGRP_CLK2_OUT = PINGRP_SDMMC1_DAT0 + 3, PINGRP_CLK2_REQ, - PINGRP_LCD_PWR1, - PINGRP_LCD_PWR2, - PINGRP_LCD_SDIN, - PINGRP_LCD_SDOUT, - PINGRP_LCD_WR_N, - PINGRP_LCD_CS0_N, - PINGRP_LCD_DC0, - PINGRP_LCD_SCK, - PINGRP_LCD_PWR0, - PINGRP_LCD_PCLK, - PINGRP_LCD_DE, - PINGRP_LCD_HSYNC, - PINGRP_LCD_VSYNC, - PINGRP_LCD_D0, - PINGRP_LCD_D1, - PINGRP_LCD_D2, - PINGRP_LCD_D3, - PINGRP_LCD_D4, - PINGRP_LCD_D5, - PINGRP_LCD_D6, - PINGRP_LCD_D7, - PINGRP_LCD_D8, - PINGRP_LCD_D9, - PINGRP_LCD_D10, - PINGRP_LCD_D11, - PINGRP_LCD_D12, - PINGRP_LCD_D13, - PINGRP_LCD_D14, - PINGRP_LCD_D15, - PINGRP_LCD_D16, - PINGRP_LCD_D17, - PINGRP_LCD_D18, - PINGRP_LCD_D19, - PINGRP_LCD_D20, - PINGRP_LCD_D21, - PINGRP_LCD_D22, - PINGRP_LCD_D23, - PINGRP_LCD_CS1_N, - PINGRP_LCD_M1, - PINGRP_LCD_DC1, - PINGRP_HDMI_INT, + PINGRP_HDMI_INT = PINGRP_CLK2_REQ + 41, PINGRP_DDC_SCL, PINGRP_DDC_SDA, - PINGRP_CRT_HSYNC, - PINGRP_CRT_VSYNC, - PINGRP_VI_D0, - PINGRP_VI_D1, - PINGRP_VI_D2, - PINGRP_VI_D3, - PINGRP_VI_D4, - PINGRP_VI_D5, - PINGRP_VI_D6, - PINGRP_VI_D7, - PINGRP_VI_D8, - PINGRP_VI_D9, - PINGRP_VI_D10, - PINGRP_VI_D11, - PINGRP_VI_PCLK, - PINGRP_VI_MCLK, - PINGRP_VI_VSYNC, - PINGRP_VI_HSYNC, - PINGRP_UART2_RXD, + PINGRP_UART2_RXD = PINGRP_DDC_SDA + 19, PINGRP_UART2_TXD, PINGRP_UART2_RTS_N, PINGRP_UART2_CTS_N, @@ -186,8 +126,7 @@ enum pmux_pingrp { PINGRP_SDMMC4_DAT5, PINGRP_SDMMC4_DAT6, PINGRP_SDMMC4_DAT7, - PINGRP_SDMMC4_RST_N, - PINGRP_CAM_MCLK, + PINGRP_CAM_MCLK = PINGRP_SDMMC4_DAT7 + 2, PINGRP_GPIO_PCC1, PINGRP_GPIO_PBB0, PINGRP_CAM_I2C_SCL, @@ -212,12 +151,7 @@ enum pmux_pingrp { PINGRP_KB_ROW8, PINGRP_KB_ROW9, PINGRP_KB_ROW10, - PINGRP_KB_ROW11, - PINGRP_KB_ROW12, - PINGRP_KB_ROW13, - PINGRP_KB_ROW14, - PINGRP_KB_ROW15, - PINGRP_KB_COL0, + PINGRP_KB_COL0 = PINGRP_KB_ROW10 + 6, PINGRP_KB_COL1, PINGRP_KB_COL2, PINGRP_KB_COL3, @@ -244,47 +178,30 @@ enum pmux_pingrp { PINGRP_DAP2_DIN, PINGRP_DAP2_DOUT, PINGRP_DAP2_SCLK, - PINGRP_SPI2_MOSI, - PINGRP_SPI2_MISO, - PINGRP_SPI2_CS0_N, - PINGRP_SPI2_SCK, - PINGRP_SPI1_MOSI, - PINGRP_SPI1_SCK, - PINGRP_SPI1_CS0_N, - PINGRP_SPI1_MISO, - PINGRP_SPI2_CS1_N, - PINGRP_SPI2_CS2_N, - PINGRP_SDMMC3_CLK, + PINGRP_DVFS_PWM, + PINGRP_GPIO_X1_AUD, + PINGRP_GPIO_X3_AUD, + PINGRP_DVFS_CLK, + PINGRP_GPIO_X4_AUD, + PINGRP_GPIO_X5_AUD, + PINGRP_GPIO_X6_AUD, + PINGRP_GPIO_X7_AUD, + PINGRP_SDMMC3_CLK = PINGRP_GPIO_X7_AUD + 3, PINGRP_SDMMC3_CMD, PINGRP_SDMMC3_DAT0, PINGRP_SDMMC3_DAT1, PINGRP_SDMMC3_DAT2, PINGRP_SDMMC3_DAT3, - PINGRP_SDMMC3_DAT4, - PINGRP_SDMMC3_DAT5, - PINGRP_SDMMC3_DAT6, - PINGRP_SDMMC3_DAT7, - PINGRP_PEX_L0_PRSNT_N, - PINGRP_PEX_L0_RST_N, - PINGRP_PEX_L0_CLKREQ_N, - PINGRP_PEX_WAKE_N, - PINGRP_PEX_L1_PRSNT_N, - PINGRP_PEX_L1_RST_N, - PINGRP_PEX_L1_CLKREQ_N, - PINGRP_PEX_L2_PRSNT_N, - PINGRP_PEX_L2_RST_N, - PINGRP_PEX_L2_CLKREQ_N, - PINGRP_HDMI_CEC, /* offset 0x33e0 */ + PINGRP_HDMI_CEC = PINGRP_SDMMC3_DAT3 + 15, /* offset 0x33e0 */ PINGRP_SDMMC1_WP_N, PINGRP_SDMMC3_CD_N, - PINGRP_SPI1_CS1_N, - PINGRP_SPI1_CS2_N, - PINGRP_USB_VBUS_EN0, /* offset 0x33f4 */ + PINGRP_GPIO_W2_AUD, + PINGRP_GPIO_W3_AUD, + PINGRP_USB_VBUS_EN0, /* offset 0x33f4 */ PINGRP_USB_VBUS_EN1, PINGRP_SDMMC3_CLK_LB_IN, PINGRP_SDMMC3_CLK_LB_OUT, - PINGRP_NAND_GMI_CLK_LB, - PINGRP_RESET_OUT_N, + PINGRP_RESET_OUT_N = PINGRP_SDMMC3_CLK_LB_OUT + 2, PINGRP_COUNT, }; @@ -298,41 +215,35 @@ enum pdrive_pingrp { PDRIVE_PINGROUP_AT5, PDRIVE_PINGROUP_CDEV1, PDRIVE_PINGROUP_CDEV2, - PDRIVE_PINGROUP_CSUS, - PDRIVE_PINGROUP_DAP1, + PDRIVE_PINGROUP_DAP1 = 10, /* offset 0x890 */ PDRIVE_PINGROUP_DAP2, PDRIVE_PINGROUP_DAP3, PDRIVE_PINGROUP_DAP4, PDRIVE_PINGROUP_DBG, - PDRIVE_PINGROUP_LCD1, - PDRIVE_PINGROUP_LCD2, - PDRIVE_PINGROUP_SDIO2, - PDRIVE_PINGROUP_SDIO3, + PDRIVE_PINGROUP_SDIO3 = 18, /* offset 0x8B0 */ PDRIVE_PINGROUP_SPI, PDRIVE_PINGROUP_UAA, PDRIVE_PINGROUP_UAB, PDRIVE_PINGROUP_UART2, PDRIVE_PINGROUP_UART3, - PDRIVE_PINGROUP_VI1 = 24, /* offset 0x8c8 */ - PDRIVE_PINGROUP_SDIO1 = 33, /* offset 0x8ec */ - PDRIVE_PINGROUP_CRT = 36, /* offset 0x8f8 */ - PDRIVE_PINGROUP_DDC, + PDRIVE_PINGROUP_SDIO1 = 33, /* offset 0x8EC */ + PDRIVE_PINGROUP_DDC = 37, /* offset 0x8FC */ PDRIVE_PINGROUP_GMA, - PDRIVE_PINGROUP_GMB, - PDRIVE_PINGROUP_GMC, - PDRIVE_PINGROUP_GMD, - PDRIVE_PINGROUP_GME, + PDRIVE_PINGROUP_GME = 42, /* offset 0x910 */ PDRIVE_PINGROUP_GMF, PDRIVE_PINGROUP_GMG, PDRIVE_PINGROUP_GMH, PDRIVE_PINGROUP_OWR, PDRIVE_PINGROUP_UAD, - PDRIVE_PINGROUP_GPV, PDRIVE_PINGROUP_DEV3 = 49, /* offset 0x92c */ PDRIVE_PINGROUP_CEC = 52, /* offset 0x938 */ - PDRIVE_PINGROUP_AT6, + PDRIVE_PINGROUP_AT6 = 75, /* offset 0x994 */ PDRIVE_PINGROUP_DAP5, PDRIVE_PINGROUP_VBUS, + PDRIVE_PINGROUP_AO3, + PDRIVE_PINGROUP_HVC, + PDRIVE_PINGROUP_SDIO4, + PDRIVE_PINGROUP_AO0, PDRIVE_PINGROUP_COUNT, }; @@ -401,6 +312,7 @@ enum pmux_func { PMUX_FUNC_VI, PMUX_FUNC_VI_SENSOR_CLK, PMUX_FUNC_XIO, + /* End of Tegra2 MUX selectors */ PMUX_FUNC_BLINK, PMUX_FUNC_CEC, PMUX_FUNC_CLK12, @@ -444,7 +356,7 @@ enum pmux_func { PMUX_FUNC_VGP4, PMUX_FUNC_VGP5, PMUX_FUNC_VGP6, - + /* End of Tegra3 MUX selectors */ PMUX_FUNC_USB, PMUX_FUNC_SOC, PMUX_FUNC_CPU, @@ -453,10 +365,12 @@ enum pmux_func { PMUX_FUNC_PMI, PMUX_FUNC_CLDVFS, PMUX_FUNC_RESET_OUT_N, + /* End of Tegra114 MUX selectors */ PMUX_FUNC_SAFE, PMUX_FUNC_MAX, + PMUX_FUNC_INVALID = 0x4000, PMUX_FUNC_RSVD1 = 0x8000, PMUX_FUNC_RSVD2 = 0x8001, PMUX_FUNC_RSVD3 = 0x8002, @@ -492,6 +406,7 @@ enum pmux_tristate { enum pmux_pin_io { PMUX_PIN_OUTPUT = 0, PMUX_PIN_INPUT = 1, + PMUX_PIN_NONE, }; /* return 1 if a pin_io_is in range */ #define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \ @@ -525,6 +440,16 @@ enum pmux_pin_ioreset { (((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \ ((ioreset) <= PMUX_PIN_IO_RESET_ENABLE)) +enum pmux_pin_rcv_sel { + PMUX_PIN_RCV_SEL_DEFAULT = 0, + PMUX_PIN_RCV_SEL_NORMAL, + PMUX_PIN_RCV_SEL_HIGH, +}; +/* return 1 if a pin_rcv_sel_is in range */ +#define pmux_pin_rcv_sel_isvalid(rcv_sel) \ + (((rcv_sel) >= PMUX_PIN_RCV_SEL_DEFAULT) && \ + ((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH)) + /* Available power domains used by pin groups */ enum pmux_vddio { PMUX_VDDIO_BB = 0, @@ -546,10 +471,73 @@ enum pmux_vddio { PMUX_VDDIO_NONE }; -/* T114 pin drive group and pin mux registers */ -#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2) -#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \ - PDRIVE_PINGROUP_COUNT) +#define PGRP_SLWF_NONE -1 +#define PGRP_SLWF_MAX 3 +#define PGRP_SLWR_NONE PGRP_SLWF_NONE +#define PGRP_SLWR_MAX PGRP_SLWF_MAX + +#define PGRP_DRVUP_NONE -1 +#define PGRP_DRVUP_MAX 127 +#define PGRP_DRVDN_NONE PGRP_DRVUP_NONE +#define PGRP_DRVDN_MAX PGRP_DRVUP_MAX + +#define PGRP_SCHMT_NONE -1 +#define PGRP_HSM_NONE PGRP_SCHMT_NONE + +/* return 1 if a padgrp is in range */ +#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT)) + +/* return 1 if a slew-rate rising/falling edge value is in range */ +#define pmux_pad_slw_isvalid(slw) (((slw) == PGRP_SLWF_NONE) || \ + (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX))) + +/* return 1 if a driver output pull-up/down strength code value is in range */ +#define pmux_pad_drv_isvalid(drv) (((drv) == PGRP_DRVUP_NONE) || \ + (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX))) + +/* return 1 if a low-power mode value is in range */ +#define pmux_pad_lpmd_isvalid(lpm) (((lpm) == PGRP_LPMD_NONE) || \ + (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X))) + +/* Defines a pin group cfg's low-power mode select */ +enum pgrp_lpmd { + PGRP_LPMD_X8 = 0, + PGRP_LPMD_X4, + PGRP_LPMD_X2, + PGRP_LPMD_X, + PGRP_LPMD_NONE = -1, +}; + +/* Defines whether a pin group cfg's schmidt is enabled or not */ +enum pgrp_schmt { + PGRP_SCHMT_DISABLE = 0, + PGRP_SCHMT_ENABLE = 1, +}; + +/* Defines whether a pin group cfg's high-speed mode is enabled or not */ +enum pgrp_hsm { + PGRP_HSM_DISABLE = 0, + PGRP_HSM_ENABLE = 1, +}; + +/* + * This defines the configuration for a pin group's pad control config + */ +struct padctrl_config { + enum pdrive_pingrp padgrp; /* pin group PDRIVE_PINGRP_x */ + int slwf; /* falling edge slew */ + int slwr; /* rising edge slew */ + int drvup; /* pull-up drive strength */ + int drvdn; /* pull-down drive strength */ + enum pgrp_lpmd lpmd; /* low-power mode selection */ + enum pgrp_schmt schmt; /* schmidt enable */ + enum pgrp_hsm hsm; /* high-speed mode enable */ +}; + +/* t114 pin drive group and pin mux registers */ +#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2) +#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \ + PDRIVE_PINGROUP_COUNT) struct pmux_tri_ctlr { uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */ uint pmt_reserved1; /* ABP_MISC_PP_ reserved offset 04 */ @@ -581,6 +569,8 @@ struct pingroup_config { enum pmux_pin_lock lock; /* lock enable/disable PMUX_PIN... */ enum pmux_pin_od od; /* open-drain or push-pull driver */ enum pmux_pin_ioreset ioreset; /* input/output reset PMUX_PIN... */ + enum pmux_pin_rcv_sel rcv_sel; /* select between High and Normal */ + /* VIL/VIH receivers */ }; /* Set a pin group to tristate */ @@ -615,4 +605,12 @@ void pinmux_config_table(struct pingroup_config *config, int len); /* Set a group of pins from a table */ void pinmux_init(void); -#endif /* _TEGRA114_PINMUX_H_ */ +/** + * Set the GP pad configs + * + * @param config List of config items + * @param len Number of config items in list + */ +void padgrp_config_table(struct padctrl_config *config, int len); + +#endif /* _TEGRA114_PINMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/tegra.h b/arch/arm/include/asm/arch-tegra20/tegra.h index e1de0447ff..ad5c01d1f4 100644 --- a/arch/arm/include/asm/arch-tegra20/tegra.h +++ b/arch/arm/include/asm/arch-tegra20/tegra.h @@ -29,7 +29,6 @@ #include <asm/arch-tegra/tegra.h> #define TEGRA_USB1_BASE 0xC5000000 -#define TEGRA_USB3_BASE 0xC5008000 #define BCT_ODMDATA_OFFSET 4068 /* 12 bytes from end of BCT */ diff --git a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h index 9b383d0e74..23d184f2dd 100644 --- a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h +++ b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h @@ -56,4 +56,10 @@ struct apb_misc_gp_ctlr { u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */ }; +/* SDMMC1/3 settings from section 24.6 of T30 TRM */ +#define SDIOCFG_DRVUP_SLWF 1 +#define SDIOCFG_DRVDN_SLWR 1 +#define SDIOCFG_DRVUP 0x2E +#define SDIOCFG_DRVDN 0x2A + #endif /* _TEGRA30_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h index 341951bfcb..a9e1b462c4 100644 --- a/arch/arm/include/asm/arch-tegra30/pinmux.h +++ b/arch/arm/include/asm/arch-tegra30/pinmux.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -531,6 +531,63 @@ enum pmux_vddio { PMUX_VDDIO_NONE }; +#define PGRP_SLWF_NONE -1 +#define PGRP_SLWF_MAX 3 +#define PGRP_SLWR_NONE PGRP_SLWF_NONE +#define PGRP_SLWR_MAX PGRP_SLWF_MAX + +#define PGRP_DRVUP_NONE -1 +#define PGRP_DRVUP_MAX 127 +#define PGRP_DRVDN_NONE PGRP_DRVUP_NONE +#define PGRP_DRVDN_MAX PGRP_DRVUP_MAX + +/* return 1 if a padgrp is in range */ +#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT)) + +/* return 1 if a slew-rate rising/falling edge value is in range */ +#define pmux_pad_slw_isvalid(slw) (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX)) + +/* return 1 if a driver output pull-up/down strength code value is in range */ +#define pmux_pad_drv_isvalid(drv) (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX)) + +/* return 1 if a low-power mode value is in range */ +#define pmux_pad_lpmd_isvalid(lpm) (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X)) + +/* Defines a pin group cfg's low-power mode select */ +enum pgrp_lpmd { + PGRP_LPMD_X8 = 0, + PGRP_LPMD_X4, + PGRP_LPMD_X2, + PGRP_LPMD_X, + PGRP_LPMD_NONE = -1, +}; + +/* Defines whether a pin group cfg's schmidt is enabled or not */ +enum pgrp_schmt { + PGRP_SCHMT_DISABLE = 0, + PGRP_SCHMT_ENABLE = 1, +}; + +/* Defines whether a pin group cfg's high-speed mode is enabled or not */ +enum pgrp_hsm { + PGRP_HSM_DISABLE = 0, + PGRP_HSM_ENABLE = 1, +}; + +/* + * This defines the configuration for a pin group's pad control config + */ +struct padctrl_config { + enum pdrive_pingrp padgrp; /* pin group PDRIVE_PINGRP_x */ + int slwf; /* falling edge slew */ + int slwr; /* rising edge slew */ + int drvup; /* pull-up drive strength */ + int drvdn; /* pull-down drive strength */ + enum pgrp_lpmd lpmd; /* low-power mode selection */ + enum pgrp_schmt schmt; /* schmidt enable */ + enum pgrp_hsm hsm; /* high-speed mode enable */ +}; + /* t30 pin drive group and pin mux registers */ #define PDRIVE_PINGROUP_OFFSET (0x868 >> 2) #define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \ @@ -600,4 +657,12 @@ void pinmux_config_table(struct pingroup_config *config, int len); /* Set a group of pins from a table */ void pinmux_init(void); +/** + * Set the GP pad configs + * + * @param config List of config items + * @param len Number of config items in list + */ +void padgrp_config_table(struct padctrl_config *config, int len); + #endif /* _TEGRA30_PINMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h index decf564d13..c02c5d8500 100644 --- a/arch/arm/include/asm/arch-tegra30/tegra.h +++ b/arch/arm/include/asm/arch-tegra30/tegra.h @@ -21,6 +21,8 @@ #include <asm/arch-tegra/tegra.h> +#define TEGRA_USB1_BASE 0x7D000000 + #define BCT_ODMDATA_OFFSET 6116 /* 12 bytes from end of BCT */ #define MAX_NUM_CPU 4 diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h new file mode 100644 index 0000000000..d0c69da971 --- /dev/null +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -0,0 +1,85 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_ARCH_HARDWARE_H +#define _ASM_ARCH_HARDWARE_H + +#define XPSS_SYS_CTRL_BASEADDR 0xF8000000 +#define XPSS_DEV_CFG_APB_BASEADDR 0xF8007000 +#define XPSS_SCU_BASEADDR 0xF8F00000 + +/* Reflect slcr offsets */ +struct slcr_regs { + u32 scl; /* 0x0 */ + u32 slcr_lock; /* 0x4 */ + u32 slcr_unlock; /* 0x8 */ + u32 reserved1[125]; + u32 pss_rst_ctrl; /* 0x200 */ + u32 reserved2[15]; + u32 fpga_rst_ctrl; /* 0x240 */ + u32 reserved3[5]; + u32 reboot_status; /* 0x258 */ + u32 boot_mode; /* 0x25c */ + u32 reserved4[116]; + u32 trust_zone; /* 0x430 */ /* FIXME */ + u32 reserved5[115]; + u32 ddr_urgent; /* 0x600 */ + u32 reserved6[6]; + u32 ddr_urgent_sel; /* 0x61c */ + u32 reserved7[188]; + u32 ocm_cfg; /* 0x910 */ +}; + +#define slcr_base ((struct slcr_regs *) XPSS_SYS_CTRL_BASEADDR) + +struct devcfg_regs { + u32 ctrl; /* 0x0 */ + u32 lock; /* 0x4 */ + u32 cfg; /* 0x8 */ + u32 int_sts; /* 0xc */ + u32 int_mask; /* 0x10 */ + u32 status; /* 0x14 */ + u32 dma_src_addr; /* 0x18 */ + u32 dma_dst_addr; /* 0x1c */ + u32 dma_src_len; /* 0x20 */ + u32 dma_dst_len; /* 0x24 */ + u32 rom_shadow; /* 0x28 */ + u32 reserved1[2]; + u32 unlock; /* 0x34 */ + u32 reserved2[18]; + u32 mctrl; /* 0x80 */ + u32 reserved3; + u32 write_count; /* 0x88 */ + u32 read_count; /* 0x8c */ +}; + +#define devcfg_base ((struct devcfg_regs *) XPSS_DEV_CFG_APB_BASEADDR) + +struct scu_regs { + u32 reserved1[16]; + u32 filter_start; /* 0x40 */ + u32 filter_end; /* 0x44 */ +}; + +#define scu_base ((struct scu_regs *) XPSS_SCU_BASEADDR) + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/arm/include/asm/arch-zynq/sys_proto.h index 7b60ca7454..e78890011a 100644 --- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -1,5 +1,8 @@ /* - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -8,7 +11,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -16,20 +19,12 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -.section ".text.init", "x" -#include <linux/linkage.h> +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ -.macro init_arm_errata - /* ARM erratum ID #743622 */ - mrc p15, 0, r10, c15, c0, 1 /* read diagnostic register */ - orr r10, r10, #1 << 6 /* set bit #6 */ - /* ARM erratum ID #751472 */ - orr r10, r10, #1 << 11 /* set bit #11 */ - mcr p15, 0, r10, c15, c0, 1 /* write diagnostic register */ -.endm +extern void zynq_slcr_lock(void); +extern void zynq_slcr_unlock(void); +extern void zynq_slcr_cpu_reset(void); -ENTRY(lowlevel_init) - init_arm_errata - mov pc, lr -ENDPROC(lowlevel_init) +#endif /* _SYS_PROTO_H_ */ diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h index ad9a875de5..a73630bc4d 100644 --- a/arch/arm/include/asm/armv7.h +++ b/arch/arm/include/asm/armv7.h @@ -33,6 +33,7 @@ /* Cortex-A15 revisions */ #define MIDR_CORTEX_A15_R0P0 0x410FC0F0 +#define MIDR_CORTEX_A15_R2P2 0x412FC0F2 /* CCSIDR */ #define CCSIDR_LINE_SIZE_OFFSET 0 diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index ed251ec8ec..c5d1e6c837 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -519,6 +519,7 @@ #define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES 0x0000C1A7 #define SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES 0x000001A7 +#define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES_ES2 0x0000C1C7 /* DMM */ #define DMM_BASE 0x4E000040 @@ -696,11 +697,9 @@ struct dmm_lisa_map_regs { u32 dmm_lisa_map_1; u32 dmm_lisa_map_2; u32 dmm_lisa_map_3; + u8 is_ma_present; }; -extern const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; -extern const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; - #define CS0 0 #define CS1 1 /* The maximum frequency at which the LPDDR2 interface can operate in Hz*/ @@ -1027,6 +1026,11 @@ extern const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; #define MR8_IO_WIDTH_SHIFT 0x6 #define MR8_IO_WIDTH_MASK (0x3 << 0x6) +/* SDRAM TYPE */ +#define EMIF_SDRAM_TYPE_DDR2 0x2 +#define EMIF_SDRAM_TYPE_DDR3 0x3 +#define EMIF_SDRAM_TYPE_LPDDR2 0x4 + struct lpddr2_addressing { u8 num_banks; u8 t_REFI_us_x10; @@ -1129,6 +1133,14 @@ struct emif_regs { u32 emif_rd_wr_exec_thresh; }; +struct lpddr2_mr_regs { + s8 mr1; + s8 mr2; + s8 mr3; + s8 mr10; + s8 mr16; +}; + /* assert macros */ #if defined(DEBUG) #define emif_assert(c) ({ if (!(c)) for (;;); }) @@ -1148,6 +1160,7 @@ void emif_get_device_timings(u32 emif_nr, #endif void do_ext_phy_settings(u32 base, const struct emif_regs *regs); +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs); #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS extern u32 *const T_num; @@ -1156,4 +1169,5 @@ extern u32 *const emif_sizes; #endif void config_data_eye_leveling_samples(u32 emif_base); +u32 emif_sdram_type(void); #endif diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 2a40b898e3..091ddb508d 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -25,6 +25,524 @@ #ifndef _OMAP_COMMON_H_ #define _OMAP_COMMON_H_ +#include <common.h> + +#define NUM_SYS_CLKS 8 + +struct prcm_regs { + /* cm1.ckgen */ + u32 cm_clksel_core; + u32 cm_clksel_abe; + u32 cm_dll_ctrl; + u32 cm_clkmode_dpll_core; + u32 cm_idlest_dpll_core; + u32 cm_autoidle_dpll_core; + u32 cm_clksel_dpll_core; + u32 cm_div_m2_dpll_core; + u32 cm_div_m3_dpll_core; + u32 cm_div_h11_dpll_core; + u32 cm_div_h12_dpll_core; + u32 cm_div_h13_dpll_core; + u32 cm_div_h14_dpll_core; + u32 cm_div_h21_dpll_core; + u32 cm_div_h24_dpll_core; + u32 cm_ssc_deltamstep_dpll_core; + u32 cm_ssc_modfreqdiv_dpll_core; + u32 cm_emu_override_dpll_core; + u32 cm_div_h22_dpllcore; + u32 cm_div_h23_dpll_core; + u32 cm_clkmode_dpll_mpu; + u32 cm_idlest_dpll_mpu; + u32 cm_autoidle_dpll_mpu; + u32 cm_clksel_dpll_mpu; + u32 cm_div_m2_dpll_mpu; + u32 cm_ssc_deltamstep_dpll_mpu; + u32 cm_ssc_modfreqdiv_dpll_mpu; + u32 cm_bypclk_dpll_mpu; + u32 cm_clkmode_dpll_iva; + u32 cm_idlest_dpll_iva; + u32 cm_autoidle_dpll_iva; + u32 cm_clksel_dpll_iva; + u32 cm_div_h11_dpll_iva; + u32 cm_div_h12_dpll_iva; + u32 cm_ssc_deltamstep_dpll_iva; + u32 cm_ssc_modfreqdiv_dpll_iva; + u32 cm_bypclk_dpll_iva; + u32 cm_clkmode_dpll_abe; + u32 cm_idlest_dpll_abe; + u32 cm_autoidle_dpll_abe; + u32 cm_clksel_dpll_abe; + u32 cm_div_m2_dpll_abe; + u32 cm_div_m3_dpll_abe; + u32 cm_ssc_deltamstep_dpll_abe; + u32 cm_ssc_modfreqdiv_dpll_abe; + u32 cm_clkmode_dpll_ddrphy; + u32 cm_idlest_dpll_ddrphy; + u32 cm_autoidle_dpll_ddrphy; + u32 cm_clksel_dpll_ddrphy; + u32 cm_div_m2_dpll_ddrphy; + u32 cm_div_h11_dpll_ddrphy; + u32 cm_div_h12_dpll_ddrphy; + u32 cm_div_h13_dpll_ddrphy; + u32 cm_ssc_deltamstep_dpll_ddrphy; + u32 cm_clkmode_dpll_dsp; + u32 cm_shadow_freq_config1; + u32 cm_mpu_mpu_clkctrl; + + /* cm1.dsp */ + u32 cm_dsp_clkstctrl; + u32 cm_dsp_dsp_clkctrl; + + /* cm1.abe */ + u32 cm1_abe_clkstctrl; + u32 cm1_abe_l4abe_clkctrl; + u32 cm1_abe_aess_clkctrl; + u32 cm1_abe_pdm_clkctrl; + u32 cm1_abe_dmic_clkctrl; + u32 cm1_abe_mcasp_clkctrl; + u32 cm1_abe_mcbsp1_clkctrl; + u32 cm1_abe_mcbsp2_clkctrl; + u32 cm1_abe_mcbsp3_clkctrl; + u32 cm1_abe_slimbus_clkctrl; + u32 cm1_abe_timer5_clkctrl; + u32 cm1_abe_timer6_clkctrl; + u32 cm1_abe_timer7_clkctrl; + u32 cm1_abe_timer8_clkctrl; + u32 cm1_abe_wdt3_clkctrl; + + /* cm2.ckgen */ + u32 cm_clksel_mpu_m3_iss_root; + u32 cm_clksel_usb_60mhz; + u32 cm_scale_fclk; + u32 cm_core_dvfs_perf1; + u32 cm_core_dvfs_perf2; + u32 cm_core_dvfs_perf3; + u32 cm_core_dvfs_perf4; + u32 cm_core_dvfs_current; + u32 cm_iva_dvfs_perf_tesla; + u32 cm_iva_dvfs_perf_ivahd; + u32 cm_iva_dvfs_perf_abe; + u32 cm_iva_dvfs_current; + u32 cm_clkmode_dpll_per; + u32 cm_idlest_dpll_per; + u32 cm_autoidle_dpll_per; + u32 cm_clksel_dpll_per; + u32 cm_div_m2_dpll_per; + u32 cm_div_m3_dpll_per; + u32 cm_div_h11_dpll_per; + u32 cm_div_h12_dpll_per; + u32 cm_div_h13_dpll_per; + u32 cm_div_h14_dpll_per; + u32 cm_ssc_deltamstep_dpll_per; + u32 cm_ssc_modfreqdiv_dpll_per; + u32 cm_emu_override_dpll_per; + u32 cm_clkmode_dpll_usb; + u32 cm_idlest_dpll_usb; + u32 cm_autoidle_dpll_usb; + u32 cm_clksel_dpll_usb; + u32 cm_div_m2_dpll_usb; + u32 cm_ssc_deltamstep_dpll_usb; + u32 cm_ssc_modfreqdiv_dpll_usb; + u32 cm_clkdcoldo_dpll_usb; + u32 cm_clkmode_dpll_pcie_ref; + u32 cm_clkmode_apll_pcie; + u32 cm_idlest_apll_pcie; + u32 cm_div_m2_apll_pcie; + u32 cm_clkvcoldo_apll_pcie; + u32 cm_clkmode_dpll_unipro; + u32 cm_idlest_dpll_unipro; + u32 cm_autoidle_dpll_unipro; + u32 cm_clksel_dpll_unipro; + u32 cm_div_m2_dpll_unipro; + u32 cm_ssc_deltamstep_dpll_unipro; + u32 cm_ssc_modfreqdiv_dpll_unipro; + + /* cm2.core */ + u32 cm_coreaon_bandgap_clkctrl; + u32 cm_coreaon_io_srcomp_clkctrl; + u32 cm_l3_1_clkstctrl; + u32 cm_l3_1_dynamicdep; + u32 cm_l3_1_l3_1_clkctrl; + u32 cm_l3_2_clkstctrl; + u32 cm_l3_2_dynamicdep; + u32 cm_l3_2_l3_2_clkctrl; + u32 cm_l3_gpmc_clkctrl; + u32 cm_l3_2_ocmc_ram_clkctrl; + u32 cm_mpu_m3_clkstctrl; + u32 cm_mpu_m3_staticdep; + u32 cm_mpu_m3_dynamicdep; + u32 cm_mpu_m3_mpu_m3_clkctrl; + u32 cm_sdma_clkstctrl; + u32 cm_sdma_staticdep; + u32 cm_sdma_dynamicdep; + u32 cm_sdma_sdma_clkctrl; + u32 cm_memif_clkstctrl; + u32 cm_memif_dmm_clkctrl; + u32 cm_memif_emif_fw_clkctrl; + u32 cm_memif_emif_1_clkctrl; + u32 cm_memif_emif_2_clkctrl; + u32 cm_memif_dll_clkctrl; + u32 cm_memif_emif_h1_clkctrl; + u32 cm_memif_emif_h2_clkctrl; + u32 cm_memif_dll_h_clkctrl; + u32 cm_c2c_clkstctrl; + u32 cm_c2c_staticdep; + u32 cm_c2c_dynamicdep; + u32 cm_c2c_sad2d_clkctrl; + u32 cm_c2c_modem_icr_clkctrl; + u32 cm_c2c_sad2d_fw_clkctrl; + u32 cm_l4cfg_clkstctrl; + u32 cm_l4cfg_dynamicdep; + u32 cm_l4cfg_l4_cfg_clkctrl; + u32 cm_l4cfg_hw_sem_clkctrl; + u32 cm_l4cfg_mailbox_clkctrl; + u32 cm_l4cfg_sar_rom_clkctrl; + u32 cm_l3instr_clkstctrl; + u32 cm_l3instr_l3_3_clkctrl; + u32 cm_l3instr_l3_instr_clkctrl; + u32 cm_l3instr_intrconn_wp1_clkctrl; + + /* cm2.ivahd */ + u32 cm_ivahd_clkstctrl; + u32 cm_ivahd_ivahd_clkctrl; + u32 cm_ivahd_sl2_clkctrl; + + /* cm2.cam */ + u32 cm_cam_clkstctrl; + u32 cm_cam_iss_clkctrl; + u32 cm_cam_fdif_clkctrl; + u32 cm_cam_vip1_clkctrl; + u32 cm_cam_vip2_clkctrl; + u32 cm_cam_vip3_clkctrl; + u32 cm_cam_lvdsrx_clkctrl; + u32 cm_cam_csi1_clkctrl; + u32 cm_cam_csi2_clkctrl; + + /* cm2.dss */ + u32 cm_dss_clkstctrl; + u32 cm_dss_dss_clkctrl; + + /* cm2.sgx */ + u32 cm_sgx_clkstctrl; + u32 cm_sgx_sgx_clkctrl; + + /* cm2.l3init */ + u32 cm_l3init_clkstctrl; + + /* cm2.l3init */ + u32 cm_l3init_hsmmc1_clkctrl; + u32 cm_l3init_hsmmc2_clkctrl; + u32 cm_l3init_hsi_clkctrl; + u32 cm_l3init_hsusbhost_clkctrl; + u32 cm_l3init_hsusbotg_clkctrl; + u32 cm_l3init_hsusbtll_clkctrl; + u32 cm_l3init_p1500_clkctrl; + u32 cm_l3init_fsusb_clkctrl; + u32 cm_l3init_ocp2scp1_clkctrl; + + /* cm2.l4per */ + u32 cm_l4per_clkstctrl; + u32 cm_l4per_dynamicdep; + u32 cm_l4per_adc_clkctrl; + u32 cm_l4per_gptimer10_clkctrl; + u32 cm_l4per_gptimer11_clkctrl; + u32 cm_l4per_gptimer2_clkctrl; + u32 cm_l4per_gptimer3_clkctrl; + u32 cm_l4per_gptimer4_clkctrl; + u32 cm_l4per_gptimer9_clkctrl; + u32 cm_l4per_elm_clkctrl; + u32 cm_l4per_gpio2_clkctrl; + u32 cm_l4per_gpio3_clkctrl; + u32 cm_l4per_gpio4_clkctrl; + u32 cm_l4per_gpio5_clkctrl; + u32 cm_l4per_gpio6_clkctrl; + u32 cm_l4per_hdq1w_clkctrl; + u32 cm_l4per_hecc1_clkctrl; + u32 cm_l4per_hecc2_clkctrl; + u32 cm_l4per_i2c1_clkctrl; + u32 cm_l4per_i2c2_clkctrl; + u32 cm_l4per_i2c3_clkctrl; + u32 cm_l4per_i2c4_clkctrl; + u32 cm_l4per_l4per_clkctrl; + u32 cm_l4per_mcasp2_clkctrl; + u32 cm_l4per_mcasp3_clkctrl; + u32 cm_l4per_mgate_clkctrl; + u32 cm_l4per_mcspi1_clkctrl; + u32 cm_l4per_mcspi2_clkctrl; + u32 cm_l4per_mcspi3_clkctrl; + u32 cm_l4per_mcspi4_clkctrl; + u32 cm_l4per_gpio7_clkctrl; + u32 cm_l4per_gpio8_clkctrl; + u32 cm_l4per_mmcsd3_clkctrl; + u32 cm_l4per_mmcsd4_clkctrl; + u32 cm_l4per_msprohg_clkctrl; + u32 cm_l4per_slimbus2_clkctrl; + u32 cm_l4per_uart1_clkctrl; + u32 cm_l4per_uart2_clkctrl; + u32 cm_l4per_uart3_clkctrl; + u32 cm_l4per_uart4_clkctrl; + u32 cm_l4per_mmcsd5_clkctrl; + u32 cm_l4per_i2c5_clkctrl; + u32 cm_l4per_uart5_clkctrl; + u32 cm_l4per_uart6_clkctrl; + u32 cm_l4sec_clkstctrl; + u32 cm_l4sec_staticdep; + u32 cm_l4sec_dynamicdep; + u32 cm_l4sec_aes1_clkctrl; + u32 cm_l4sec_aes2_clkctrl; + u32 cm_l4sec_des3des_clkctrl; + u32 cm_l4sec_pkaeip29_clkctrl; + u32 cm_l4sec_rng_clkctrl; + u32 cm_l4sec_sha2md51_clkctrl; + u32 cm_l4sec_cryptodma_clkctrl; + + /* l4 wkup regs */ + u32 cm_abe_pll_ref_clksel; + u32 cm_sys_clksel; + u32 cm_wkup_clkstctrl; + u32 cm_wkup_l4wkup_clkctrl; + u32 cm_wkup_wdtimer1_clkctrl; + u32 cm_wkup_wdtimer2_clkctrl; + u32 cm_wkup_gpio1_clkctrl; + u32 cm_wkup_gptimer1_clkctrl; + u32 cm_wkup_gptimer12_clkctrl; + u32 cm_wkup_synctimer_clkctrl; + u32 cm_wkup_usim_clkctrl; + u32 cm_wkup_sarram_clkctrl; + u32 cm_wkup_keyboard_clkctrl; + u32 cm_wkup_rtc_clkctrl; + u32 cm_wkup_bandgap_clkctrl; + u32 cm_wkupaon_scrm_clkctrl; + u32 cm_wkupaon_io_srcomp_clkctrl; + u32 prm_rstctrl; + u32 prm_rstst; + u32 prm_vc_val_bypass; + u32 prm_vc_cfg_i2c_mode; + u32 prm_vc_cfg_i2c_clk; + u32 prm_sldo_core_setup; + u32 prm_sldo_core_ctrl; + u32 prm_sldo_mpu_setup; + u32 prm_sldo_mpu_ctrl; + u32 prm_sldo_mm_setup; + u32 prm_sldo_mm_ctrl; + + u32 cm_div_m4_dpll_core; + u32 cm_div_m5_dpll_core; + u32 cm_div_m6_dpll_core; + u32 cm_div_m7_dpll_core; + u32 cm_div_m4_dpll_iva; + u32 cm_div_m5_dpll_iva; + u32 cm_div_m4_dpll_ddrphy; + u32 cm_div_m5_dpll_ddrphy; + u32 cm_div_m6_dpll_ddrphy; + u32 cm_div_m4_dpll_per; + u32 cm_div_m5_dpll_per; + u32 cm_div_m6_dpll_per; + u32 cm_div_m7_dpll_per; + u32 cm_l3instr_intrconn_wp1_clkct; + u32 cm_l3init_usbphy_clkctrl; + u32 cm_l4per_mcbsp4_clkctrl; + u32 prm_vc_cfg_channel; +}; + +struct omap_sys_ctrl_regs { + u32 control_status; + u32 control_core_mmr_lock1; + u32 control_core_mmr_lock2; + u32 control_core_mmr_lock3; + u32 control_core_mmr_lock4; + u32 control_core_mmr_lock5; + u32 control_core_control_io1; + u32 control_core_control_io2; + u32 control_id_code; + u32 control_std_fuse_opp_bgap; + u32 control_ldosram_iva_voltage_ctrl; + u32 control_ldosram_mpu_voltage_ctrl; + u32 control_ldosram_core_voltage_ctrl; + u32 control_padconf_core_base; + u32 control_paconf_global; + u32 control_paconf_mode; + u32 control_smart1io_padconf_0; + u32 control_smart1io_padconf_1; + u32 control_smart1io_padconf_2; + u32 control_smart2io_padconf_0; + u32 control_smart2io_padconf_1; + u32 control_smart2io_padconf_2; + u32 control_smart3io_padconf_0; + u32 control_smart3io_padconf_1; + u32 control_pbias; + u32 control_i2c_0; + u32 control_camera_rx; + u32 control_hdmi_tx_phy; + u32 control_uniportm; + u32 control_dsiphy; + u32 control_mcbsplp; + u32 control_usb2phycore; + u32 control_hdmi_1; + u32 control_hsi; + u32 control_ddr3ch1_0; + u32 control_ddr3ch2_0; + u32 control_ddrch1_0; + u32 control_ddrch1_1; + u32 control_ddrch2_0; + u32 control_ddrch2_1; + u32 control_lpddr2ch1_0; + u32 control_lpddr2ch1_1; + u32 control_ddrio_0; + u32 control_ddrio_1; + u32 control_ddrio_2; + u32 control_lpddr2io1_0; + u32 control_lpddr2io1_1; + u32 control_lpddr2io1_2; + u32 control_lpddr2io1_3; + u32 control_lpddr2io2_0; + u32 control_lpddr2io2_1; + u32 control_lpddr2io2_2; + u32 control_lpddr2io2_3; + u32 control_hyst_1; + u32 control_usbb_hsic_control; + u32 control_c2c; + u32 control_core_control_spare_rw; + u32 control_core_control_spare_r; + u32 control_core_control_spare_r_c0; + u32 control_srcomp_north_side; + u32 control_srcomp_south_side; + u32 control_srcomp_east_side; + u32 control_srcomp_west_side; + u32 control_srcomp_code_latch; + u32 control_pbiaslite; + u32 control_port_emif1_sdram_config; + u32 control_port_emif1_lpddr2_nvm_config; + u32 control_port_emif2_sdram_config; + u32 control_emif1_sdram_config_ext; + u32 control_emif2_sdram_config_ext; + u32 control_smart1nopmio_padconf_0; + u32 control_smart1nopmio_padconf_1; + u32 control_padconf_mode; + u32 control_xtal_oscillator; + u32 control_i2c_2; + u32 control_ckobuffer; + u32 control_wkup_control_spare_rw; + u32 control_wkup_control_spare_r; + u32 control_wkup_control_spare_r_c0; + u32 control_srcomp_east_side_wkup; + u32 control_efuse_1; + u32 control_efuse_2; + u32 control_efuse_3; + u32 control_efuse_4; + u32 control_efuse_5; + u32 control_efuse_6; + u32 control_efuse_7; + u32 control_efuse_8; + u32 control_efuse_9; + u32 control_efuse_10; + u32 control_efuse_11; + u32 control_efuse_12; + u32 control_efuse_13; + u32 control_padconf_wkup_base; +}; + +struct dpll_params { + u32 m; + u32 n; + s8 m2; + s8 m3; + s8 m4_h11; + s8 m5_h12; + s8 m6_h13; + s8 m7_h14; + s8 h21; + s8 h22; + s8 h23; + s8 h24; +}; + +struct dpll_regs { + u32 cm_clkmode_dpll; + u32 cm_idlest_dpll; + u32 cm_autoidle_dpll; + u32 cm_clksel_dpll; + u32 cm_div_m2_dpll; + u32 cm_div_m3_dpll; + u32 cm_div_m4_h11_dpll; + u32 cm_div_m5_h12_dpll; + u32 cm_div_m6_h13_dpll; + u32 cm_div_m7_h14_dpll; + u32 reserved[2]; + u32 cm_div_h21_dpll; + u32 cm_div_h22_dpll; + u32 cm_div_h23_dpll; + u32 cm_div_h24_dpll; +}; + +struct dplls { + const struct dpll_params *mpu; + const struct dpll_params *core; + const struct dpll_params *per; + const struct dpll_params *abe; + const struct dpll_params *iva; + const struct dpll_params *usb; + const struct dpll_params *ddr; +}; + +struct pmic_data { + u32 base_offset; + u32 step; + u32 start_code; + unsigned gpio; + int gpio_en; +}; + +struct volts { + u32 value; + u32 addr; + struct pmic_data *pmic; +}; + +struct vcores_data { + struct volts mpu; + struct volts core; + struct volts mm; +}; + +extern struct prcm_regs const **prcm; +extern struct prcm_regs const omap5_es1_prcm; +extern struct prcm_regs const omap5_es2_prcm; +extern struct prcm_regs const omap4_prcm; +extern struct prcm_regs const dra7xx_prcm; +extern struct dplls const **dplls_data; +extern struct vcores_data const **omap_vcores; +extern const u32 sys_clk_array[8]; +extern struct omap_sys_ctrl_regs const **ctrl; +extern struct omap_sys_ctrl_regs const omap4_ctrl; +extern struct omap_sys_ctrl_regs const omap5_ctrl; +extern struct omap_sys_ctrl_regs const dra7xx_ctrl; + +void hw_data_init(void); + +const struct dpll_params *get_mpu_dpll_params(struct dplls const *); +const struct dpll_params *get_core_dpll_params(struct dplls const *); +const struct dpll_params *get_per_dpll_params(struct dplls const *); +const struct dpll_params *get_iva_dpll_params(struct dplls const *); +const struct dpll_params *get_usb_dpll_params(struct dplls const *); +const struct dpll_params *get_abe_dpll_params(struct dplls const *); + +void do_enable_clocks(u32 const *clk_domains, + u32 const *clk_modules_hw_auto, + u32 const *clk_modules_explicit_en, + u8 wait_for_enable); + +void setup_post_dividers(u32 const base, + const struct dpll_params *params); +u32 omap_ddr_clk(void); +u32 get_sys_clk_index(void); +void enable_basic_clocks(void); +void enable_basic_uboot_clocks(void); +void enable_non_essential_clocks(void); +void scale_vcores(struct vcores_data const *); +u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); +void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); + /* Max value for DPLL multiplier M */ #define OMAP_DPLL_MAX_N 127 @@ -60,4 +578,9 @@ static inline u32 omap_revision(void) #define OMAP5430_SILICON_ID_INVALID 0 #define OMAP5430_ES1_0 0x54300100 #define OMAP5432_ES1_0 0x54320100 +#define OMAP5430_ES2_0 0x54300200 +#define OMAP5432_ES2_0 0x54320200 + +/* DRA7XX */ +#define DRA752_ES1_0 0x07520100 #endif /* _OMAP_COMMON_H_ */ diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h new file mode 100644 index 0000000000..617e22fa52 --- /dev/null +++ b/arch/arm/include/asm/omap_mmc.h @@ -0,0 +1,168 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef OMAP_MMC_H_ +#define OMAP_MMC_H_ + +struct hsmmc { + unsigned char res1[0x10]; + unsigned int sysconfig; /* 0x10 */ + unsigned int sysstatus; /* 0x14 */ + unsigned char res2[0x14]; + unsigned int con; /* 0x2C */ + unsigned char res3[0xD4]; + unsigned int blk; /* 0x104 */ + unsigned int arg; /* 0x108 */ + unsigned int cmd; /* 0x10C */ + unsigned int rsp10; /* 0x110 */ + unsigned int rsp32; /* 0x114 */ + unsigned int rsp54; /* 0x118 */ + unsigned int rsp76; /* 0x11C */ + unsigned int data; /* 0x120 */ + unsigned int pstate; /* 0x124 */ + unsigned int hctl; /* 0x128 */ + unsigned int sysctl; /* 0x12C */ + unsigned int stat; /* 0x130 */ + unsigned int ie; /* 0x134 */ + unsigned char res4[0x8]; + unsigned int capa; /* 0x140 */ +}; + +/* + * OMAP HS MMC Bit definitions + */ +#define MMC_SOFTRESET (0x1 << 1) +#define RESETDONE (0x1 << 0) +#define NOOPENDRAIN (0x0 << 0) +#define OPENDRAIN (0x1 << 0) +#define OD (0x1 << 0) +#define INIT_NOINIT (0x0 << 1) +#define INIT_INITSTREAM (0x1 << 1) +#define HR_NOHOSTRESP (0x0 << 2) +#define STR_BLOCK (0x0 << 3) +#define MODE_FUNC (0x0 << 4) +#define DW8_1_4BITMODE (0x0 << 5) +#define MIT_CTO (0x0 << 6) +#define CDP_ACTIVEHIGH (0x0 << 7) +#define WPP_ACTIVEHIGH (0x0 << 8) +#define RESERVED_MASK (0x3 << 9) +#define CTPL_MMC_SD (0x0 << 11) +#define BLEN_512BYTESLEN (0x200 << 0) +#define NBLK_STPCNT (0x0 << 16) +#define DE_DISABLE (0x0 << 0) +#define BCE_DISABLE (0x0 << 1) +#define BCE_ENABLE (0x1 << 1) +#define ACEN_DISABLE (0x0 << 2) +#define DDIR_OFFSET (4) +#define DDIR_MASK (0x1 << 4) +#define DDIR_WRITE (0x0 << 4) +#define DDIR_READ (0x1 << 4) +#define MSBS_SGLEBLK (0x0 << 5) +#define MSBS_MULTIBLK (0x1 << 5) +#define RSP_TYPE_OFFSET (16) +#define RSP_TYPE_MASK (0x3 << 16) +#define RSP_TYPE_NORSP (0x0 << 16) +#define RSP_TYPE_LGHT136 (0x1 << 16) +#define RSP_TYPE_LGHT48 (0x2 << 16) +#define RSP_TYPE_LGHT48B (0x3 << 16) +#define CCCE_NOCHECK (0x0 << 19) +#define CCCE_CHECK (0x1 << 19) +#define CICE_NOCHECK (0x0 << 20) +#define CICE_CHECK (0x1 << 20) +#define DP_OFFSET (21) +#define DP_MASK (0x1 << 21) +#define DP_NO_DATA (0x0 << 21) +#define DP_DATA (0x1 << 21) +#define CMD_TYPE_NORMAL (0x0 << 22) +#define INDEX_OFFSET (24) +#define INDEX_MASK (0x3f << 24) +#define INDEX(i) (i << 24) +#define DATI_MASK (0x1 << 1) +#define CMDI_MASK (0x1 << 0) +#define DTW_1_BITMODE (0x0 << 1) +#define DTW_4_BITMODE (0x1 << 1) +#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ +#define SDBP_PWROFF (0x0 << 8) +#define SDBP_PWRON (0x1 << 8) +#define SDVS_1V8 (0x5 << 9) +#define SDVS_3V0 (0x6 << 9) +#define ICE_MASK (0x1 << 0) +#define ICE_STOP (0x0 << 0) +#define ICS_MASK (0x1 << 1) +#define ICS_NOTREADY (0x0 << 1) +#define ICE_OSCILLATE (0x1 << 0) +#define CEN_MASK (0x1 << 2) +#define CEN_DISABLE (0x0 << 2) +#define CEN_ENABLE (0x1 << 2) +#define CLKD_OFFSET (6) +#define CLKD_MASK (0x3FF << 6) +#define DTO_MASK (0xF << 16) +#define DTO_15THDTO (0xE << 16) +#define SOFTRESETALL (0x1 << 24) +#define CC_MASK (0x1 << 0) +#define TC_MASK (0x1 << 1) +#define BWR_MASK (0x1 << 4) +#define BRR_MASK (0x1 << 5) +#define ERRI_MASK (0x1 << 15) +#define IE_CC (0x01 << 0) +#define IE_TC (0x01 << 1) +#define IE_BWR (0x01 << 4) +#define IE_BRR (0x01 << 5) +#define IE_CTO (0x01 << 16) +#define IE_CCRC (0x01 << 17) +#define IE_CEB (0x01 << 18) +#define IE_CIE (0x01 << 19) +#define IE_DTO (0x01 << 20) +#define IE_DCRC (0x01 << 21) +#define IE_DEB (0x01 << 22) +#define IE_CERR (0x01 << 28) +#define IE_BADA (0x01 << 29) + +#define VS30_3V0SUP (1 << 25) +#define VS18_1V8SUP (1 << 26) + +/* Driver definitions */ +#define MMCSD_SECTOR_SIZE 512 +#define MMC_CARD 0 +#define SD_CARD 1 +#define BYTE_MODE 0 +#define SECTOR_MODE 1 +#define CLK_INITSEQ 0 +#define CLK_400KHZ 1 +#define CLK_MISC 2 + +#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) +#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) + +/* Clock Configurations and Macros */ +#define MMC_CLOCK_REFERENCE 96 /* MHz */ + +#define mmc_reg_out(addr, mask, val)\ + writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) + +int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, + int wp_gpio); + + +#endif /* OMAP_MMC_H_ */ diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 24c7e7a18a..6ae161a51d 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -42,6 +42,7 @@ ifndef CONFIG_SPL_BUILD ifndef CONFIG_SYS_GENERIC_BOARD COBJS-y += board.o endif +COBJS-y += bss.o COBJS-y += bootm.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o diff --git a/arch/arm/lib/bss.c b/arch/arm/lib/bss.c new file mode 100644 index 0000000000..99eda59137 --- /dev/null +++ b/arch/arm/lib/bss.c @@ -0,0 +1,39 @@ +/* + * Copyright 2013 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/** + * These two symbols are declared in a C file so that the linker + * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one + * it would use if the symbols were defined in the linker file. + * Using only R_ARM_RELATIVE relocation ensures that references to + * the symbols are correct after as well as before relocation. + * + * We need a 0-byte-size type for these symbols, and the compiler + * does not allow defining objects of C type 'void'. Using an empty + * struct is allowed by the compiler, but causes gcc versions 4.4 and + * below to complain about aliasing. Therefore we use the next best + * thing: zero-sized arrays, which are both 0-byte-size and exempt from + * aliasing warnings. + */ + +char __bss_start[0] __attribute__((used, section(".__bss_start"))); +char __bss_end[0] __attribute__((used, section(".__bss_end"))); diff --git a/arch/avr32/cpu/u-boot.lds b/arch/avr32/cpu/u-boot.lds index d096424812..4e4a436dc9 100644 --- a/arch/avr32/cpu/u-boot.lds +++ b/arch/avr32/cpu/u-boot.lds @@ -50,7 +50,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); diff --git a/arch/blackfin/cpu/u-boot.lds b/arch/blackfin/cpu/u-boot.lds index 58db838fb0..77f48c1a12 100644 --- a/arch/blackfin/cpu/u-boot.lds +++ b/arch/blackfin/cpu/u-boot.lds @@ -114,7 +114,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } >ram_data .text_l1 : diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index fe3d97dad8..1ae4184fb0 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -54,7 +54,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .bss ALIGN(0x4): diff --git a/arch/mips/cpu/u-boot.lds b/arch/mips/cpu/u-boot.lds index 10513abd2c..ca18d463e9 100644 --- a/arch/mips/cpu/u-boot.lds +++ b/arch/mips/cpu/u-boot.lds @@ -64,7 +64,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); diff --git a/arch/nds32/cpu/n1213/u-boot.lds b/arch/nds32/cpu/n1213/u-boot.lds index c64d3b7236..e9fbcd3804 100644 --- a/arch/nds32/cpu/n1213/u-boot.lds +++ b/arch/nds32/cpu/n1213/u-boot.lds @@ -55,7 +55,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); diff --git a/arch/nios2/cpu/u-boot.lds b/arch/nios2/cpu/u-boot.lds index 90a7795746..4c45336d4a 100644 --- a/arch/nios2/cpu/u-boot.lds +++ b/arch/nios2/cpu/u-boot.lds @@ -48,7 +48,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } /* INIT DATA sections - "Small" data (see the gcc -G option) diff --git a/arch/powerpc/cpu/74xx_7xx/u-boot.lds b/arch/powerpc/cpu/74xx_7xx/u-boot.lds index ce03db0bfd..40b89abac6 100644 --- a/arch/powerpc/cpu/74xx_7xx/u-boot.lds +++ b/arch/powerpc/cpu/74xx_7xx/u-boot.lds @@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/arch/powerpc/cpu/mpc512x/u-boot.lds b/arch/powerpc/cpu/mpc512x/u-boot.lds index 66ff02f0a1..0d8697901f 100644 --- a/arch/powerpc/cpu/mpc512x/u-boot.lds +++ b/arch/powerpc/cpu/mpc512x/u-boot.lds @@ -60,7 +60,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/arch/powerpc/cpu/mpc5xx/u-boot.lds b/arch/powerpc/cpu/mpc5xx/u-boot.lds index 0001e583eb..8385a29bcb 100644 --- a/arch/powerpc/cpu/mpc5xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc5xx/u-boot.lds @@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds index bc59fad47e..590952fd15 100644 --- a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds +++ b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds @@ -68,7 +68,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot.lds b/arch/powerpc/cpu/mpc5xxx/u-boot.lds index d179dbcb2a..06ece78361 100644 --- a/arch/powerpc/cpu/mpc5xxx/u-boot.lds +++ b/arch/powerpc/cpu/mpc5xxx/u-boot.lds @@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/arch/powerpc/cpu/mpc8220/u-boot.lds b/arch/powerpc/cpu/mpc8220/u-boot.lds index ec98f0f41b..dc63d2081b 100644 --- a/arch/powerpc/cpu/mpc8220/u-boot.lds +++ b/arch/powerpc/cpu/mpc8220/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/arch/powerpc/cpu/mpc824x/u-boot.lds b/arch/powerpc/cpu/mpc824x/u-boot.lds index 74e2a233ec..4590fab338 100644 --- a/arch/powerpc/cpu/mpc824x/u-boot.lds +++ b/arch/powerpc/cpu/mpc824x/u-boot.lds @@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/arch/powerpc/cpu/mpc8260/u-boot.lds b/arch/powerpc/cpu/mpc8260/u-boot.lds index ce28dbadf7..eb1c611f90 100644 --- a/arch/powerpc/cpu/mpc8260/u-boot.lds +++ b/arch/powerpc/cpu/mpc8260/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/arch/powerpc/cpu/mpc83xx/u-boot.lds b/arch/powerpc/cpu/mpc83xx/u-boot.lds index 22e92e9f1e..a9d8598839 100644 --- a/arch/powerpc/cpu/mpc83xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc83xx/u-boot.lds @@ -61,7 +61,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds index 8a44a36429..65106f5e1f 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds @@ -72,7 +72,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds index 15c73c1418..80cd98093a 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds @@ -54,7 +54,7 @@ SECTIONS _edata = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(8); diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds index d2bf7b7cc4..0503dce5ae 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds @@ -80,7 +80,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/arch/powerpc/cpu/mpc86xx/u-boot.lds b/arch/powerpc/cpu/mpc86xx/u-boot.lds index 65386b8315..7e357baf95 100644 --- a/arch/powerpc/cpu/mpc86xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc86xx/u-boot.lds @@ -67,7 +67,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds index 8c6beb0392..06010d6b14 100644 --- a/arch/powerpc/cpu/ppc4xx/u-boot.lds +++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds @@ -81,7 +81,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/arch/sandbox/cpu/u-boot.lds b/arch/sandbox/cpu/u-boot.lds index 1b781ebf6a..94c26f1aad 100644 --- a/arch/sandbox/cpu/u-boot.lds +++ b/arch/sandbox/cpu/u-boot.lds @@ -27,7 +27,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } __u_boot_sandbox_option_start = .; diff --git a/arch/sh/cpu/sh2/u-boot.lds b/arch/sh/cpu/sh2/u-boot.lds index 20cb459775..3cd5699c89 100644 --- a/arch/sh/cpu/sh2/u-boot.lds +++ b/arch/sh/cpu/sh2/u-boot.lds @@ -74,7 +74,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); diff --git a/arch/sh/cpu/sh3/u-boot.lds b/arch/sh/cpu/sh3/u-boot.lds index b5f60f29f5..654c52cda7 100644 --- a/arch/sh/cpu/sh3/u-boot.lds +++ b/arch/sh/cpu/sh3/u-boot.lds @@ -80,7 +80,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); diff --git a/arch/sh/cpu/sh4/u-boot.lds b/arch/sh/cpu/sh4/u-boot.lds index 5721c18d20..11d7ffab7e 100644 --- a/arch/sh/cpu/sh4/u-boot.lds +++ b/arch/sh/cpu/sh4/u-boot.lds @@ -77,7 +77,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds index 69e6ea6ff2..2d6911aa41 100644 --- a/arch/x86/cpu/u-boot.lds +++ b/arch/x86/cpu/u-boot.lds @@ -36,7 +36,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); diff --git a/board/BuS/eb_cpu5282/u-boot.lds b/board/BuS/eb_cpu5282/u-boot.lds index 7c1695a87c..c72043d235 100644 --- a/board/BuS/eb_cpu5282/u-boot.lds +++ b/board/BuS/eb_cpu5282/u-boot.lds @@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds index ee2c70501c..2b76e92e4f 100644 --- a/board/LEOX/elpt860/u-boot.lds +++ b/board/LEOX/elpt860/u-boot.lds @@ -89,7 +89,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/RPXClassic/u-boot.lds +++ b/board/RPXClassic/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug index dc8c4e958f..e88bd977d9 100644 --- a/board/RPXClassic/u-boot.lds.debug +++ b/board/RPXClassic/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/RPXlite/u-boot.lds +++ b/board/RPXlite/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug index dc8c4e958f..e88bd977d9 100644 --- a/board/RPXlite/u-boot.lds.debug +++ b/board/RPXlite/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/RPXlite_dw/u-boot.lds +++ b/board/RPXlite_dw/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug index b43a1e4281..88c410cd92 100644 --- a/board/RPXlite_dw/u-boot.lds.debug +++ b/board/RPXlite_dw/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/RRvision/u-boot.lds b/board/RRvision/u-boot.lds index 646931ab91..84bb763c7b 100644 --- a/board/RRvision/u-boot.lds +++ b/board/RRvision/u-boot.lds @@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds index a0d217b0b5..c76728a7fb 100644 --- a/board/actux1/u-boot.lds +++ b/board/actux1/u-boot.lds @@ -41,15 +41,15 @@ SECTIONS *(.text*) } - . = ALIGN (4); + . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - . = ALIGN (4); + . = ALIGN(4); .data : { *(.data*) } - . = ALIGN (4); + . = ALIGN(4); .got : { *(.got) } @@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4); @@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + __bss_end = .; } - __bss_end =.; + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index da2b4e253a..984f70e510 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -41,15 +41,15 @@ SECTIONS *(.text*) } - . = ALIGN (4); + . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - . = ALIGN (4); + . = ALIGN(4); .data : { *(.data*) } - . = ALIGN (4); + . = ALIGN(4); .got : { *(.got) } @@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4); @@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + __bss_end = .; } - __bss_end =.; + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds index f922033887..fc48cf03fd 100644 --- a/board/actux3/u-boot.lds +++ b/board/actux3/u-boot.lds @@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4); @@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + __bss_end = .; } - __bss_end =.; + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds index 2f10e7ce5f..def2f1f938 100644 --- a/board/adder/u-boot.lds +++ b/board/adder/u-boot.lds @@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds index d6b66d4126..dd9d52db4b 100644 --- a/board/ait/cam_enc_4xx/u-boot-spl.lds +++ b/board/ait/cam_enc_4xx/u-boot-spl.lds @@ -48,10 +48,6 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } >.sram - . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/board/altera/nios2-generic/u-boot.lds b/board/altera/nios2-generic/u-boot.lds index bf7600a2a0..f3095982b6 100644 --- a/board/altera/nios2-generic/u-boot.lds +++ b/board/altera/nios2-generic/u-boot.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } /* INIT DATA sections - "Small" data (see the gcc -G option) diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds index 3bdad3462f..e9f026fb7e 100644 --- a/board/amcc/acadia/u-boot-nand.lds +++ b/board/amcc/acadia/u-boot-nand.lds @@ -74,7 +74,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds index 1f9a4aed55..209f48450a 100644 --- a/board/amcc/bamboo/u-boot-nand.lds +++ b/board/amcc/bamboo/u-boot-nand.lds @@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds index 0396c9f58d..3d616133d0 100644 --- a/board/amcc/canyonlands/u-boot-nand.lds +++ b/board/amcc/canyonlands/u-boot-nand.lds @@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds index 3bdad3462f..e9f026fb7e 100644 --- a/board/amcc/kilauea/u-boot-nand.lds +++ b/board/amcc/kilauea/u-boot-nand.lds @@ -74,7 +74,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds index 9a2a232d3b..2ea3944412 100644 --- a/board/amcc/sequoia/u-boot-nand.lds +++ b/board/amcc/sequoia/u-boot-nand.lds @@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/amcc/sequoia/u-boot-ram.lds b/board/amcc/sequoia/u-boot-ram.lds index e853da8853..1b537f6f40 100644 --- a/board/amcc/sequoia/u-boot-ram.lds +++ b/board/amcc/sequoia/u-boot-ram.lds @@ -66,7 +66,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds index 11aa09271b..264e43f54d 100644 --- a/board/astro/mcf5373l/u-boot.lds +++ b/board/astro/mcf5373l/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 2555672524..3aa394a4bb 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -157,13 +157,18 @@ int board_early_init_f(void) int board_init(void) { +#ifdef CONFIG_AT91SAM9G20EK_2MMC + /* arch number of AT91SAM9G20EK_2MMC-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC; +#else #ifdef CONFIG_AT91SAM9G20EK - /* arch number of AT91SAM9260EK-Board */ + /* arch number of AT91SAM9G20EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; #else /* arch number of AT91SAM9260EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; #endif +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c index e6a932ec3c..ea95e43286 100644 --- a/board/avionic-design/common/tamonten.c +++ b/board/avionic-design/common/tamonten.c @@ -33,13 +33,8 @@ #include <asm/arch/tegra.h> #include <asm/arch-tegra/board.h> #include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/mmc.h> #include <asm/arch-tegra/sys_proto.h> #include <asm/arch-tegra/uart.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif - #ifdef CONFIG_BOARD_EARLY_INIT_F void gpio_early_init(void) @@ -54,7 +49,7 @@ void gpio_early_init(void) * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT); /* for write-protect GPIO PI6 */ @@ -62,16 +57,4 @@ static void pin_mux_mmc(void) /* for CD GPIO PH2 */ pinmux_tristate_disable(PINGRP_ATD); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - /* init dev 0, SD slot, with 4-bit bus */ - tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); - - return 0; -} #endif diff --git a/board/avionic-design/dts/tegra20-medcom-wide.dts b/board/avionic-design/dts/tegra20-medcom-wide.dts index e46afbeab3..a9a07f9bcd 100644 --- a/board/avionic-design/dts/tegra20-medcom-wide.dts +++ b/board/avionic-design/dts/tegra20-medcom-wide.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Medcom-Wide"; @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; }; memory { diff --git a/board/avionic-design/dts/tegra20-plutux.dts b/board/avionic-design/dts/tegra20-plutux.dts index 3e6cce013e..20016f29bb 100644 --- a/board/avionic-design/dts/tegra20-plutux.dts +++ b/board/avionic-design/dts/tegra20-plutux.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Plutux"; @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; }; memory { diff --git a/board/avionic-design/dts/tegra20-tamonten.dtsi b/board/avionic-design/dts/tegra20-tamonten.dtsi new file mode 100644 index 0000000000..86c7bab160 --- /dev/null +++ b/board/avionic-design/dts/tegra20-tamonten.dtsi @@ -0,0 +1,489 @@ +#include "tegra20.dtsi" + +/ { + model = "Avionic Design Tamonten SOM"; + compatible = "ad,tamonten", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + host1x { + hdmi { + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata"; + nvidia,function = "ide"; + }; + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + atc { + nvidia,pins = "atc"; + nvidia,function = "nand"; + }; + atd { + nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu", + "spia", "spib", "spic"; + nvidia,function = "gmi"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + dta { + nvidia,pins = "dta", "dtd"; + nvidia,function = "sdio2"; + }; + dtb { + nvidia,pins = "dtb", "dtc", "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gmc { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv", "slxa", "slxk"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uarta"; + }; + kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + lcsn { + nvidia,pins = "lcsn", "ld0", "ld1", "ld2", + "ld3", "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", "ld12", + "ld13", "ld14", "ld15", "ld16", "ld17", + "ldc", "ldi", "lhp0", "lhp1", "lhp2", + "lhs", "lm0", "lm1", "lpp", "lpw0", + "lpw1", "lpw2", "lsc0", "lsc1", "lsck", + "lsda", "lsdi", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd"; + nvidia,function = "pwm"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + slxc { + nvidia,pins = "slxc", "slxd"; + nvidia,function = "spdif"; + }; + spid { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + }; + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "atd", "ate", + "cdev1", "cdev2", "dap1", "dtb", "gma", + "gmb", "gmc", "gmd", "gme", "gpu7", + "gpv", "i2cp", "pta", "rm", "slxa", + "slxk", "spia", "spib", "uac"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = <0>; + }; + conf_csus { + nvidia,pins = "csus", "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_crtp { + nvidia,pins = "crtp", "dap2", "dap3", "dap4", + "dtc", "dte", "dtf", "gpu", "sdio1", + "slxc", "slxd", "spdi", "spdo", "spig", + "uda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_ddc { + nvidia,pins = "ddc", "dta", "dtd", "kbca", + "kbcb", "kbcc", "kbcd", "kbce", "kbcf", + "sdc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_hdint { + nvidia,pins = "hdint", "lcsn", "ldc", "lm1", + "lpw1", "lsc1", "lsck", "lsda", "lsdi", + "lvp0", "owc", "sdb"; + nvidia,tristate = <1>; + }; + conf_irrx { + nvidia,pins = "irrx", "irtx", "sdd", "spic", + "spie", "spih", "uaa", "uab", "uad", + "uca", "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = <2>; + }; + conf_ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lm0", "lpp", + "lpw0", "lpw2", "lsc0", "lspi", "lvp1", + "lvs", "pmc"; + nvidia,tristate = <0>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + }; + + i2c@7000c400 { + clock-frequency = <100000>; + status = "okay"; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + hdmi_ddc: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + status = "okay"; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + sm0 { + regulator-name = "vdd_sys_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + sm1 { + regulator-name = "vdd_sys_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: sm2 { + regulator-name = "vdd_sys_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + ldo0 { + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo1 { + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo2 { + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3 { + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4 { + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5 { + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo6 { + regulator-name = "vdd_ldo6,avdd_vdac"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + hdmi_vdd_reg: ldo7 { + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_pll_reg: ldo8 { + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9 { + regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + ldo_rtc { + regulator-name = "vdd_rtc_out"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + }; + }; + + pmc { + nvidia,invert-interrupt; + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + bus-width = <4>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts index bf3ff1d009..1d7cf89eb6 100644 --- a/board/avionic-design/dts/tegra20-tec.dts +++ b/board/avionic-design/dts/tegra20-tec.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Tamonten Evaluation Carrier"; @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; }; memory { diff --git a/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg new file mode 100644 index 0000000000..16a37d0ced --- /dev/null +++ b/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 +DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7974 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x005A1023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 +DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 +DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42720306 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x026F0266 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x4273030A +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02740240 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45393B3E +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x403A3747 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x40434541 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x473E4A3B +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0011000E +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x000E001B +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00190015 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00070018 +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg new file mode 100644 index 0000000000..0607703825 --- /dev/null +++ b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 +DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7974 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 +DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 +DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43040319 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03040279 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43040321 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03030251 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4d434248 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c4d +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x34424543 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x49324933 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001a0017 +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00170027 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000a001f +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/6x_bootscript.txt b/board/boundary/nitrogen6x/6x_bootscript.txt new file mode 100644 index 0000000000..061b3a44b5 --- /dev/null +++ b/board/boundary/nitrogen6x/6x_bootscript.txt @@ -0,0 +1,63 @@ +setenv bootargs enable_wait_mode=off +setenv nextcon 0; + +if hdmidet ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24 + setenv fbmem "fbmem=28M"; + setexpr nextcon $nextcon + 1 +else + echo "------ no HDMI monitor"; +fi + +i2c dev 2 +if i2c probe 0x04 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbmem "fbmem=10M"; + else + setenv fbmem ${fbmem},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no Freescale display"; +fi + +if i2c probe 0x38 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbmem "fbmem=10M"; + else + setenv fbmem ${fbmem},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 1024x600 display"; +fi + +if i2c probe 0x48 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbmem "fbmem=10M"; + else + setenv fbmem ${fbmem},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 800x480 display"; +fi + +while test "3" -ne $nextcon ; do + setenv bootargs $bootargs video=mxcfb${nextcon}:off ; + setexpr nextcon $nextcon + 1 ; +done + +setenv bootargs $bootargs $fbmem +setenv bootargs "$bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait" + +if test "sata" = "${dtype}" ; then + setenv bootargs "$bootargs root=/dev/sda1" ; +else + setenv "bootargs $bootargs root=/dev/mmcblk0p1" ; +fi +${fs}load ${dtype} ${disk}:1 10800000 /boot/uImage && bootm 10800000 ; +echo "Error loading kernel image" diff --git a/board/boundary/nitrogen6x/6x_bootscript_android.txt b/board/boundary/nitrogen6x/6x_bootscript_android.txt new file mode 100644 index 0000000000..0982cf8054 --- /dev/null +++ b/board/boundary/nitrogen6x/6x_bootscript_android.txt @@ -0,0 +1,64 @@ +${dtype} dev ${disk} + +setenv bootargs enable_wait_mode=off +setenv nextcon 0; +setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 ; + +i2c dev 2 + +if i2c probe 0x04 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no Freescale display"; +fi + +if i2c probe 0x38 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 1024x600 display"; +fi + +if i2c probe 0x48 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 tsdev=tsc2004 calibration + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 800x480 display"; +fi + +if hdmidet ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=28M"; + else + setenv fbcon ${fbcon},28M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no HDMI monitor"; +fi + +while test "3" -ne $nextcon ; do + setenv bootargs $bootargs video=mxcfb${nextcon}:off ; + setexpr nextcon $nextcon + 1 ; +done + +setenv bootargs $bootargs fbcon=$fbcon +${fs}load ${dtype} ${disk}:1 10800000 uImage && ${fs}load ${dtype} ${disk}:1 12800000 uramdisk.img && bootm 10800000 12800000 +echo "Error loading kernel image" diff --git a/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt b/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt new file mode 100644 index 0000000000..0982cf8054 --- /dev/null +++ b/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt @@ -0,0 +1,64 @@ +${dtype} dev ${disk} + +setenv bootargs enable_wait_mode=off +setenv nextcon 0; +setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 ; + +i2c dev 2 + +if i2c probe 0x04 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no Freescale display"; +fi + +if i2c probe 0x38 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 1024x600 display"; +fi + +if i2c probe 0x48 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 tsdev=tsc2004 calibration + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 800x480 display"; +fi + +if hdmidet ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=28M"; + else + setenv fbcon ${fbcon},28M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no HDMI monitor"; +fi + +while test "3" -ne $nextcon ; do + setenv bootargs $bootargs video=mxcfb${nextcon}:off ; + setexpr nextcon $nextcon + 1 ; +done + +setenv bootargs $bootargs fbcon=$fbcon +${fs}load ${dtype} ${disk}:1 10800000 uImage && ${fs}load ${dtype} ${disk}:1 12800000 uramdisk.img && bootm 10800000 12800000 +echo "Error loading kernel image" diff --git a/board/boundary/nitrogen6x/6x_upgrade.txt b/board/boundary/nitrogen6x/6x_upgrade.txt new file mode 100644 index 0000000000..0d8e8e542b --- /dev/null +++ b/board/boundary/nitrogen6x/6x_upgrade.txt @@ -0,0 +1,45 @@ +setenv stdout serial,vga +echo "check U-Boot" ; +setenv offset 0x400 +if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then + echo "read $filesize bytes from SD card" ; + if sf probe || sf probe || \ + sf probe 1 27000000 || sf probe 1 27000000 ; then + echo "probed SPI ROM" ; + if sf read 0x12400000 $offset $filesize ; then + if cmp.b 0x12000000 0x12400000 $filesize ; then + echo "------- U-Boot versions match" ; + else + echo "Need U-Boot upgrade" ; + echo "Program in 5 seconds" ; + for n in 5 4 3 2 1 ; do + echo $n ; + sleep 1 ; + done + echo "erasing" ; + sf erase 0 0x50000 ; + # two steps to prevent bricking + echo "programming" ; + sf write 0x12000000 $offset $filesize ; + echo "verifying" ; + if sf read 0x12400000 $offset $filesize ; then + if cmp.b 0x12000000 0x12400000 $filesize ; then + while echo "---- U-Boot upgraded. reset" ; do + sleep 120 + done + else + echo "Read verification error" ; + fi + else + echo "Error re-reading EEPROM" ; + fi + fi + else + echo "Error reading boot loader from EEPROM" ; + fi + else + echo "Error initializing EEPROM" ; + fi ; +else + echo "No U-Boot image found on SD card" ; +fi diff --git a/board/boundary/nitrogen6x/800mhz_2x128mx16.cfg b/board/boundary/nitrogen6x/800mhz_2x128mx16.cfg new file mode 100644 index 0000000000..de33e650a1 --- /dev/null +++ b/board/boundary/nitrogen6x/800mhz_2x128mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D +DATA 4, MX6_MMDC_P0_MDCFG0, 0x40435323 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D +DATA 4, MX6_MMDC_P0_MDASP, 0x00000017 +DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/800mhz_2x256mx16.cfg b/board/boundary/nitrogen6x/800mhz_2x256mx16.cfg new file mode 100644 index 0000000000..19707cfe22 --- /dev/null +++ b/board/boundary/nitrogen6x/800mhz_2x256mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D +DATA 4, MX6_MMDC_P0_MDCFG0, 0x696C5323 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x006C1023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D +DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 +DATA 4, MX6_MMDC_P0_MDCTL, 0x84190000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/800mhz_4x128mx16.cfg b/board/boundary/nitrogen6x/800mhz_4x128mx16.cfg new file mode 100644 index 0000000000..dd6a423205 --- /dev/null +++ b/board/boundary/nitrogen6x/800mhz_4x128mx16.cfg @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D +DATA 4, MX6_MMDC_P0_MDCFG0, 0x40435323 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D +DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 +DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x420F020F +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x01760175 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x41640171 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x015E0160 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45464B4A +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x49484A46 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x40402E32 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3A3A3231 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x003A003A +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0030002F +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x002F0038 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00270039 +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/800mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/800mhz_4x256mx16.cfg new file mode 100644 index 0000000000..d5d06e2686 --- /dev/null +++ b/board/boundary/nitrogen6x/800mhz_4x256mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D +DATA 4, MX6_MMDC_P0_MDCFG0, 0x696C5323 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x006C1023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D +DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 +DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/Makefile b/board/boundary/nitrogen6x/Makefile new file mode 100644 index 0000000000..fe1e5e0c2e --- /dev/null +++ b/board/boundary/nitrogen6x/Makefile @@ -0,0 +1,41 @@ +# +# Copyright (C) 2012-2013, Guennadi Liakhovetski <lg@denx.de> +# (C) Copyright 2012-2013 Freescale Semiconductor, Inc. +# Copyright (C) 2013, Boundary Devices <info@boundarydevices.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := nitrogen6x.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/boundary/nitrogen6x/README b/board/boundary/nitrogen6x/README new file mode 100644 index 0000000000..50490931e0 --- /dev/null +++ b/board/boundary/nitrogen6x/README @@ -0,0 +1,92 @@ +U-Boot for the Boundary Devices Nitrogen6X and +Freescale i.MX6Q SabreLite boards + +This file contains information for the port of +U-Boot to the Boundary Devices Nitrogen6X and +Freescale i.MX6Q SabreLite boards. + +1. Boot source, boot from SPI NOR +--------------------------------- +The configuration in this directory supports both the +Nitrogen6X and Freescale SabreLite board, but in a +different fashion from Freescale's implementation in +board/freescale/mx6qsabrelite. + +In particular, this image supports booting from SPI NOR +and saving the environment to SPI NOR. + +It does not support 'boot from SD' at offset 0x400 +except through the 'bmode' command. + http://lists.denx.de/pipermail/u-boot/2012-August/131151.html + +2. Boots using 6x_bootscript on SATA or SD card +----------------------------------------------- +The default bootcmd for these boards is configured +to look for and source a boot script named '6x_bootscript' +in the root of the first partition of the following +devices: + + sata 0 + mmc 0 + mmc 1 + +They're searched in the order listed above, trying both the +ext2 and fat filesystems. + +2. Maintaining the SPI NOR +-------------------------- +A couple of convenience commands + + clearenv - clear environment to factory default + upgradeu - look and source a boot script named + '6x_upgrade' to upgrade the U-Boot version + in SPI NOR. The search is the same as for + 6x_bootscript described above. + +3. Display support +------------------ +U-Boot support for the following displays is configured by +default: + + HDMI - 1024 x 768 for maximum compatibility + Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1) + wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600) + wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480) + +Since the ipuv3_fb display driver currently supports only a single display, +this code auto-detects panel by probing the HDMI Phy for Hot Plug Detect +or the I2C touch controller of the LVDS and RGB displays in the priority +listed above. + +Setting 'panel' environment variable to one of the names above will +override auto-detection and force activation of the specified panel. + +4. Building +------------ + +To build U-Boot for one of the Nitrogen6x or SabreLite board: + + make nitrogen6x_config + make u-boot.imx + +Note that 'nitrogen6x' is a placeholder. The complete list of supported +board configurations is shown in tha MAINTAINERS file: + nitrogen6q i.MX6Q/6D 1GB + nitrogen6dl i.MX6DL 1GB + nitrogen6s i.MX6S 512MB + nitrogen6q2g i.MX6Q/6D 2GB + nitrogen6dl2g i.MX6DL 2GB + nitrogen6s1g i.MX6S 1GB + +The -6q variants support either the i.MX6Quad or i.MX6Dual processors +and are configured for a 64-bit memory bus at 1066 MHz. + +The -6dl variants also use a 64-bit memory bus, operated at 800MHz. + +The -6s variants use a 32-bit memory bus at 800MHz. + +If you place the u-boot.imx into a single-partition SD card +along with a binary version of the boot script 6x_upgrade.txt, +you can program it using 'upgradeu': + + U-Boot> run upgradeu diff --git a/board/boundary/nitrogen6x/clocks.cfg b/board/boundary/nitrogen6x/clocks.cfg new file mode 100644 index 0000000000..e7d1f86cdb --- /dev/null +++ b/board/boundary/nitrogen6x/clocks.cfg @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00C03F3F +DATA 4, CCM_CCGR1, 0x0030FC03 +DATA 4, CCM_CCGR2, 0x0FFFC000 +DATA 4, CCM_CCGR3, 0x3FF00000 +DATA 4, CCM_CCGR4, 0x00FFF300 +DATA 4, CCM_CCGR5, 0x0F0000C3 +DATA 4, CCM_CCGR6, 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4, MX6_IOMUXC_GPR6, 0x007F007F +DATA 4, MX6_IOMUXC_GPR7, 0x007F007F diff --git a/board/boundary/nitrogen6x/ddr-setup.cfg b/board/boundary/nitrogen6x/ddr-setup.cfg new file mode 100644 index 0000000000..c3158120a4 --- /dev/null +++ b/board/boundary/nitrogen6x/ddr-setup.cfg @@ -0,0 +1,112 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* + * DDR3 settings + * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), + * memory bus width: 64 bits x16/x32/x64 + * MX6DL ddr is limited to 800 MHz(400 MHz clock) + * memory bus width: 64 bits x16/x32/x64 + * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) + * memory bus width: 32 bits x16/x32 + */ +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030 + +DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B4DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B5DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B6DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B7DS, 0x00000030 +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 +/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 + +DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030 + +DATA 4, MX6_IOM_DRAM_CAS, 0x00020030 +DATA 4, MX6_IOM_DRAM_RAS, 0x00020030 +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030 + +DATA 4, MX6_IOM_DRAM_RESET, 0x000e0030 +DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 +DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000 + +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030 + +/* (differential input) */ +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +/* (differential input) */ +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +/* disable ddr pullups */ +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 +/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 + +/* Read data DQ Byte0-3 delay */ +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 + +/* + * MDMISC mirroring interleaved (row/bank/col) + */ +DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740 + +/* + * MDSCR con_req + */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 diff --git a/board/boundary/nitrogen6x/nitrogen6dl.cfg b/board/boundary/nitrogen6x/nitrogen6dl.cfg new file mode 100644 index 0000000000..d6da96c5e8 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6dl.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "800mhz_4x128mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg new file mode 100644 index 0000000000..0b1c35c314 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "800mhz_4x256mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6q.cfg b/board/boundary/nitrogen6x/nitrogen6q.cfg new file mode 100644 index 0000000000..680a853683 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6q.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "1066mhz_4x128mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6q2g.cfg b/board/boundary/nitrogen6x/nitrogen6q2g.cfg new file mode 100644 index 0000000000..f57ab0eedf --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6q2g.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "1066mhz_4x256mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6s.cfg b/board/boundary/nitrogen6x/nitrogen6s.cfg new file mode 100644 index 0000000000..b5af5cc1b5 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6s.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "800mhz_2x128mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6s1g.cfg b/board/boundary/nitrogen6x/nitrogen6s1g.cfg new file mode 100644 index 0000000000..5aeefc8783 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6s1g.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "800mhz_2x256mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c new file mode 100644 index 0000000000..229c237839 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -0,0 +1,895 @@ +/* + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/sys_proto.h> +#include <malloc.h> +#include <asm/arch/mx6-pins.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/mxc_i2c.h> +#include <asm/imx-common/boot_mode.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <micrel.h> +#include <miiphy.h> +#include <netdev.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mxc_hdmi.h> +#include <i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define SPI_PAD_CTRL (PAD_CTL_HYS | \ + PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + +#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE | PAD_CTL_SRE_FAST) + +#define WEAK_PULLUP (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_SRE_SLOW) + +#define WEAK_PULLDOWN (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_SRE_SLOW) + +#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm) + +int dram_init(void) +{ + gd->ram_size = ((ulong)CONFIG_DDR_MB * 1024 * 1024); + + return 0; +} + +iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t const uart2_pads[] = { + MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) + +/* I2C1, SGTL5000 */ +struct i2c_pads_info i2c_pad_info0 = { + .scl = { + .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_EIM_D21__GPIO_3_21 | PC, + .gp = IMX_GPIO_NR(3, 21) + }, + .sda = { + .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D28__GPIO_3_28 | PC, + .gp = IMX_GPIO_NR(3, 28) + } +}; + +/* I2C2 Camera, MIPI */ +struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, + .gpio_mode = MX6_PAD_KEY_COL3__GPIO_4_12 | PC, + .gp = IMX_GPIO_NR(4, 12) + }, + .sda = { + .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC, + .gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC, + .gp = IMX_GPIO_NR(4, 13) + } +}; + +/* I2C3, J15 - RGB connector */ +struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC, + .gpio_mode = MX6_PAD_GPIO_5__GPIO_1_5 | PC, + .gp = IMX_GPIO_NR(1, 5) + }, + .sda = { + .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC, + .gp = IMX_GPIO_NR(7, 11) + } +}; + +iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ +}; + +iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ +}; + +iomux_v3_cfg_t const enet_pads1[] = { + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + /* pin 35 - 1 (PHY_AD2) on reset */ + MX6_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 32 - 1 - (MODE0) all */ + MX6_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 31 - 1 - (MODE1) all */ + MX6_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 28 - 1 - (MODE2) all */ + MX6_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 27 - 1 - (MODE3) all */ + MX6_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */ + MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 42 PHY nRST */ + MX6_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_ENET_RXD0__GPIO_1_27 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +iomux_v3_cfg_t const enet_pads2[] = { + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +/* wl1271 pads on nitrogen6x */ +iomux_v3_cfg_t const wl12xx_pads[] = { + (MX6_PAD_NANDF_CS1__GPIO_6_14 & ~MUX_PAD_CTRL_MASK) + | MUX_PAD_CTRL(WEAK_PULLDOWN), + (MX6_PAD_NANDF_CS2__GPIO_6_15 & ~MUX_PAD_CTRL_MASK) + | MUX_PAD_CTRL(OUTPUT_40OHM), + (MX6_PAD_NANDF_CS3__GPIO_6_16 & ~MUX_PAD_CTRL_MASK) + | MUX_PAD_CTRL(OUTPUT_40OHM), +}; +#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14) +#define WL12XX_WL_ENABLE_GP IMX_GPIO_NR(6, 15) +#define WL12XX_BT_ENABLE_GP IMX_GPIO_NR(6, 16) + +/* Button assignments for J14 */ +static iomux_v3_cfg_t const button_pads[] = { + /* Menu */ + MX6_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Back */ + MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Labelled Search (mapped to Power under Android) */ + MX6_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Home */ + MX6_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Volume Down */ + MX6_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Volume Up */ + MX6_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), +}; + +static void setup_iomux_enet(void) +{ + gpio_direction_output(IMX_GPIO_NR(3, 23), 0); /* SABRE Lite PHY rst */ + gpio_direction_output(IMX_GPIO_NR(1, 27), 0); /* Nitrogen6X PHY rst */ + gpio_direction_output(IMX_GPIO_NR(6, 30), 1); + gpio_direction_output(IMX_GPIO_NR(6, 25), 1); + gpio_direction_output(IMX_GPIO_NR(6, 27), 1); + gpio_direction_output(IMX_GPIO_NR(6, 28), 1); + gpio_direction_output(IMX_GPIO_NR(6, 29), 1); + imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); + gpio_direction_output(IMX_GPIO_NR(6, 24), 1); + + /* Need delay 10ms according to KSZ9021 spec */ + udelay(1000 * 10); + gpio_set_value(IMX_GPIO_NR(3, 23), 1); /* SABRE Lite PHY reset */ + gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */ + + imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); +} + +iomux_v3_cfg_t const usb_pads[] = { + MX6_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); +} + +#ifdef CONFIG_USB_EHCI_MX6 +int board_ehci_hcd_init(int port) +{ + imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); + + /* Reset USB hub */ + gpio_direction_output(IMX_GPIO_NR(7, 12), 0); + mdelay(2); + gpio_set_value(IMX_GPIO_NR(7, 12), 1); + + return 0; +} +#endif + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC3_BASE_ADDR}, + {USDHC4_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret; + + if (cfg->esdhc_base == USDHC3_BASE_ADDR) { + gpio_direction_input(IMX_GPIO_NR(7, 0)); + ret = !gpio_get_value(IMX_GPIO_NR(7, 0)); + } else { + gpio_direction_input(IMX_GPIO_NR(2, 6)); + ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); + } + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ + s32 status = 0; + u32 index = 0; + + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) then supported by the board (%d)\n", + index + 1, CONFIG_SYS_FSL_USDHC_NUM); + return status; + } + + status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + } + + return status; +} +#endif + +u32 get_board_rev(void) +{ + return 0x63000; +} + +#ifdef CONFIG_MXC_SPI +iomux_v3_cfg_t const ecspi1_pads[] = { + /* SS1 */ + MX6_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), +}; + +void setup_spi(void) +{ + gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1); + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, + ARRAY_SIZE(ecspi1_pads)); +} +#endif + +int board_phy_config(struct phy_device *phydev) +{ + /* min rx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0); + /* min tx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0); + /* max rx/tx clock delay, min rx/tx control */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0); + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + uint32_t base = IMX_FEC_BASE; + struct mii_dev *bus = NULL; + struct phy_device *phydev = NULL; + int ret; + + setup_iomux_enet(); + +#ifdef CONFIG_FEC_MXC + bus = fec_get_miibus(base, -1); + if (!bus) + return 0; + /* scan phy 4,5,6,7 */ + phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + free(bus); + return 0; + } + printf("using phy at %d\n", phydev->addr); + ret = fec_probe(bis, -1, base, bus, phydev); + if (ret) { + printf("FEC MXC: %s:failed\n", __func__); + free(phydev); + free(bus); + } +#endif + return 0; +} + +static void setup_buttons(void) +{ + imx_iomux_v3_setup_multiple_pads(button_pads, + ARRAY_SIZE(button_pads)); +} + +#ifdef CONFIG_CMD_SATA + +int setup_sata(void) +{ + struct iomuxc_base_regs *const iomuxc_regs + = (struct iomuxc_base_regs *) IOMUXC_BASE_ADDR; + int ret = enable_sata_clock(); + if (ret) + return ret; + + clrsetbits_le32(&iomuxc_regs->gpr[13], + IOMUXC_GPR13_SATA_MASK, + IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB + |IOMUXC_GPR13_SATA_PHY_7_SATA2M + |IOMUXC_GPR13_SATA_SPEED_3G + |(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) + |IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED + |IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 + |IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB + |IOMUXC_GPR13_SATA_PHY_2_TX_1P104V + |IOMUXC_GPR13_SATA_PHY_1_SLOW); + + return 0; +} +#endif + +#if defined(CONFIG_VIDEO_IPUV3) + +static iomux_v3_cfg_t const backlight_pads[] = { + /* Backlight on RGB connector: J15 */ + MX6_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL), +#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21) + + /* Backlight on LVDS connector: J6 */ + MX6_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL), +#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18) +}; + +static iomux_v3_cfg_t const rgb_pads[] = { + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2, + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3, + MX6_PAD_DI0_PIN4__GPIO_4_20, + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0, + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1, + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2, + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3, + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4, + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5, + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6, + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7, + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8, + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9, + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10, + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11, + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12, + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13, + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14, + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15, + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16, + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17, + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18, + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19, + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20, + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21, + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22, + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23, +}; + +struct display_info_t { + int bus; + int addr; + int pixfmt; + int (*detect)(struct display_info_t const *dev); + void (*enable)(struct display_info_t const *dev); + struct fb_videomode mode; +}; + + +static int detect_hdmi(struct display_info_t const *dev) +{ + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; + return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; +} + +static void enable_hdmi(struct display_info_t const *dev) +{ + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; + u8 reg; + printf("%s: setup HDMI monitor\n", __func__); + reg = readb(&hdmi->phy_conf0); + reg |= HDMI_PHY_CONF0_PDZ_MASK; + writeb(reg, &hdmi->phy_conf0); + + udelay(3000); + reg |= HDMI_PHY_CONF0_ENTMDS_MASK; + writeb(reg, &hdmi->phy_conf0); + udelay(3000); + reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK; + writeb(reg, &hdmi->phy_conf0); + writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz); +} + +static int detect_i2c(struct display_info_t const *dev) +{ + return ((0 == i2c_set_bus_num(dev->bus)) + && + (0 == i2c_probe(dev->addr))); +} + +static void enable_lvds(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *) + IOMUXC_BASE_ADDR; + u32 reg = readl(&iomux->gpr[2]); + reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT; + writel(reg, &iomux->gpr[2]); + gpio_direction_output(LVDS_BACKLIGHT_GP, 1); +} + +static void enable_rgb(struct display_info_t const *dev) +{ + imx_iomux_v3_setup_multiple_pads( + rgb_pads, + ARRAY_SIZE(rgb_pads)); + gpio_direction_output(RGB_BACKLIGHT_GP, 1); +} + +static struct display_info_t const displays[] = {{ + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = detect_hdmi, + .enable = enable_hdmi, + .mode = { + .name = "HDMI", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x4, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "Hannstar-XGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x38, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "wsvga-lvds", + .refresh = 60, + .xres = 1024, + .yres = 600, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x48, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = detect_i2c, + .enable = enable_rgb, + .mode = { + .name = "wvga-rgb", + .refresh = 57, + .xres = 800, + .yres = 480, + .pixclock = 37037, + .left_margin = 40, + .right_margin = 60, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 20, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} } }; + +int board_video_skip(void) +{ + int i; + int ret; + char const *panel = getenv("panel"); + if (!panel) { + for (i = 0; i < ARRAY_SIZE(displays); i++) { + struct display_info_t const *dev = displays+i; + if (dev->detect(dev)) { + panel = dev->mode.name; + printf("auto-detected panel %s\n", panel); + break; + } + } + if (!panel) { + panel = displays[0].mode.name; + printf("No panel detected: default to %s\n", panel); + } + } else { + for (i = 0; i < ARRAY_SIZE(displays); i++) { + if (!strcmp(panel, displays[i].mode.name)) + break; + } + } + if (i < ARRAY_SIZE(displays)) { + ret = ipuv3_fb_init(&displays[i].mode, 0, + displays[i].pixfmt); + if (!ret) { + displays[i].enable(displays+i); + printf("Display: %s (%ux%u)\n", + displays[i].mode.name, + displays[i].mode.xres, + displays[i].mode.yres); + } else + printf("LCD %s cannot be configured: %d\n", + displays[i].mode.name, ret); + } else { + printf("unsupported panel %s\n", panel); + ret = -EINVAL; + } + return (0 != ret); +} + +static void setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; + + int reg; + + /* Turn on LDB0,IPU,IPU DI0 clocks */ + reg = __raw_readl(&mxc_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET + |MXC_CCM_CCGR3_LDB_DI0_MASK; + writel(reg, &mxc_ccm->CCGR3); + + /* Turn on HDMI PHY clock */ + reg = __raw_readl(&mxc_ccm->CCGR2); + reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK + |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK; + writel(reg, &mxc_ccm->CCGR2); + + /* clear HDMI PHY reset */ + writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz); + + /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ + writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); + writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set); + + /* set LDB0, LDB1 clk select to 011/011 */ + reg = readl(&mxc_ccm->cs2cdr); + reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK + |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); + reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) + |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET); + writel(reg, &mxc_ccm->cs2cdr); + + reg = readl(&mxc_ccm->cscmr2); + reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV; + writel(reg, &mxc_ccm->cscmr2); + + reg = readl(&mxc_ccm->chsccdr); + reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK + |MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK + |MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK); + reg |= (CHSCCDR_CLK_SEL_LDB_DI0 + <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET) + |(CHSCCDR_PODF_DIVIDE_BY_3 + <<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET) + |(CHSCCDR_IPU_PRE_CLK_540M_PFD + <<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET); + writel(reg, &mxc_ccm->chsccdr); + + reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES + |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH + |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW + |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG + |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT + |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG + |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT + |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED + |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0; + writel(reg, &iomux->gpr[2]); + + reg = readl(&iomux->gpr[3]); + reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK) + | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 + <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); + writel(reg, &iomux->gpr[3]); + + /* backlights off until needed */ + imx_iomux_v3_setup_multiple_pads(backlight_pads, + ARRAY_SIZE(backlight_pads)); + gpio_direction_input(LVDS_BACKLIGHT_GP); + gpio_direction_input(RGB_BACKLIGHT_GP); +} +#endif + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + /* Disable wl1271 For Nitrogen6w */ + gpio_direction_input(WL12XX_WL_IRQ_GP); + gpio_direction_output(WL12XX_WL_ENABLE_GP, 0); + gpio_direction_output(WL12XX_BT_ENABLE_GP, 0); + + imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads)); + setup_buttons(); + +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif + return 0; +} + +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +#ifdef CONFIG_MXC_SPI + setup_spi(); +#endif + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + +#ifdef CONFIG_CMD_SATA + setup_sata(); +#endif + + return 0; +} + +int checkboard(void) +{ + if (gpio_get_value(WL12XX_WL_IRQ_GP)) + puts("Board: Nitrogen6X\n"); + else + puts("Board: SABRE Lite\n"); + + return 0; +} + +struct button_key { + char const *name; + unsigned gpnum; + char ident; +}; + +static struct button_key const buttons[] = { + {"back", IMX_GPIO_NR(2, 2), 'B'}, + {"home", IMX_GPIO_NR(2, 4), 'H'}, + {"menu", IMX_GPIO_NR(2, 1), 'M'}, + {"search", IMX_GPIO_NR(2, 3), 'S'}, + {"volup", IMX_GPIO_NR(7, 13), 'V'}, + {"voldown", IMX_GPIO_NR(4, 5), 'v'}, +}; + +/* + * generate a null-terminated string containing the buttons pressed + * returns number of keys pressed + */ +static int read_keys(char *buf) +{ + int i, numpressed = 0; + for (i = 0; i < ARRAY_SIZE(buttons); i++) { + if (!gpio_get_value(buttons[i].gpnum)) + buf[numpressed++] = buttons[i].ident; + } + buf[numpressed] = '\0'; + return numpressed; +} + +static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char envvalue[ARRAY_SIZE(buttons)+1]; + int numpressed = read_keys(envvalue); + setenv("keybd", envvalue); + return numpressed == 0; +} + +U_BOOT_CMD( + kbd, 1, 1, do_kbd, + "Tests for keypresses, sets 'keybd' environment variable", + "Returns 0 (true) to shell if key is pressed." +); + +#ifdef CONFIG_PREBOOT +static char const kbd_magic_prefix[] = "key_magic"; +static char const kbd_command_prefix[] = "key_cmd"; + +static void preboot_keys(void) +{ + int numpressed; + char keypress[ARRAY_SIZE(buttons)+1]; + numpressed = read_keys(keypress); + if (numpressed) { + char *kbd_magic_keys = getenv("magic_keys"); + char *suffix; + /* + * loop over all magic keys + */ + for (suffix = kbd_magic_keys; *suffix; ++suffix) { + char *keys; + char magic[sizeof(kbd_magic_prefix) + 1]; + sprintf(magic, "%s%c", kbd_magic_prefix, *suffix); + keys = getenv(magic); + if (keys) { + if (!strcmp(keys, keypress)) + break; + } + } + if (*suffix) { + char cmd_name[sizeof(kbd_command_prefix) + 1]; + char *cmd; + sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix); + cmd = getenv(cmd_name); + if (cmd) { + setenv("preboot", cmd); + return; + } + } + } +} +#endif + +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {"mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +int misc_init_r(void) +{ +#ifdef CONFIG_PREBOOT + preboot_keys(); +#endif + +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + return 0; +} diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile index 894fa097e1..bde56e61f4 100644 --- a/board/cm_t35/Makefile +++ b/board/cm_t35/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o +COBJS-$(CONFIG_LCD) += display.o COBJS := cm_t35.o leds.o $(COBJS-y) diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c index edbb941985..e0e8235d73 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/cm_t35/cm_t35.c @@ -33,6 +33,7 @@ #include <net.h> #include <i2c.h> #include <usb.h> +#include <mmc.h> #include <twl4030.h> #include <linux/compiler.h> @@ -216,6 +217,9 @@ static void cm_t3x_set_common_muxconf(void) /* SB-T35 Ethernet */ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/ + /* DVI enable */ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPMC_nCS3*/ + /* CM-T3x Ethernet */ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/ @@ -377,9 +381,19 @@ void set_muxconf_regs(void) } #ifdef CONFIG_GENERIC_MMC +int board_mmc_getcd(struct mmc *mmc) +{ + u8 val; + + if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, TWL4030_BASEADD_GPIO)) + return -1; + + return !(val & 1); +} + int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, 59); } #endif diff --git a/board/cm_t35/display.c b/board/cm_t35/display.c new file mode 100644 index 0000000000..2f78bad6ea --- /dev/null +++ b/board/cm_t35/display.c @@ -0,0 +1,428 @@ +/* + * (C) Copyright 2012 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Nikita Kiryanov <nikita@compulab.co.il> + * + * Parsing code based on linux/drivers/video/pxafb.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <stdio_dev.h> +#include <asm/arch/dss.h> +#include <lcd.h> +#include <asm/arch-omap3/dss.h> + +DECLARE_GLOBAL_DATA_PTR; + +enum display_type { + NONE, + DVI, + DVI_CUSTOM, +}; + +#define CMAP_ADDR 0x80100000 + +/* + * The frame buffer is allocated before we have the chance to parse user input. + * To make sure enough memory is allocated for all resolutions, we define + * vl_{col | row} to the maximal resolution supported by OMAP3. + */ +vidinfo_t panel_info = { + .vl_col = 1400, + .vl_row = 1050, + .vl_bpix = LCD_BPP, + .cmap = (ushort *)CMAP_ADDR, +}; + +static struct panel_config panel_cfg; +static enum display_type lcd_def; + +/* + * A note on DVI presets; + * U-Boot can convert 8 bit BMP data to 16 bit BMP data, and OMAP DSS can + * convert 16 bit data into 24 bit data. Thus, GFXFORMAT_RGB16 allows us to + * support two BMP types with one setting. + */ +static const struct panel_config preset_dvi_640X480 = { + .lcd_size = PANEL_LCD_SIZE(640, 480), + .timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96), + .timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2), + .divisor = 12 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_800X600 = { + .lcd_size = PANEL_LCD_SIZE(800, 600), + .timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128), + .timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4), + .divisor = 8 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1024X768 = { + .lcd_size = PANEL_LCD_SIZE(1024, 768), + .timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136), + .timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6), + .divisor = 5 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1152X864 = { + .lcd_size = PANEL_LCD_SIZE(1152, 864), + .timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128), + .timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1280X960 = { + .lcd_size = PANEL_LCD_SIZE(1280, 960), + .timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112), + .timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1280X1024 = { + .lcd_size = PANEL_LCD_SIZE(1280, 1024), + .timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112), + .timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +/* + * set_resolution_params() + * + * Due to usage of multiple display related APIs resolution data is located in + * more than one place. This function updates them all. + */ +static void set_resolution_params(int x, int y) +{ + panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y); + panel_info.vl_col = x; + panel_info.vl_row = y; + lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; +} + +static void set_preset(const struct panel_config preset, int x_res, int y_res) +{ + panel_cfg = preset; + set_resolution_params(x_res, y_res); +} + +static enum display_type set_dvi_preset(const struct panel_config preset, + int x_res, int y_res) +{ + set_preset(preset, x_res, y_res); + return DVI; +} + +/* + * parse_mode() - parse the mode parameter of custom lcd settings + * + * @mode: <res_x>x<res_y> + * + * Returns -1 on error, 0 on success. + */ +static int parse_mode(const char *mode) +{ + unsigned int modelen = strlen(mode); + int res_specified = 0; + unsigned int xres = 0, yres = 0; + int yres_specified = 0; + int i; + + for (i = modelen - 1; i >= 0; i--) { + switch (mode[i]) { + case 'x': + if (!yres_specified) { + yres = simple_strtoul(&mode[i + 1], NULL, 0); + yres_specified = 1; + } else { + goto done_parsing; + } + + break; + case '0' ... '9': + break; + default: + goto done_parsing; + } + } + + if (i < 0 && yres_specified) { + xres = simple_strtoul(mode, NULL, 0); + res_specified = 1; + } + +done_parsing: + if (res_specified) { + set_resolution_params(xres, yres); + } else { + printf("LCD: invalid mode: %s\n", mode); + return -1; + } + + return 0; +} + +#define PIXEL_CLK_NUMERATOR (26 * 432 / 39) +/* + * parse_pixclock() - Parse the pixclock parameter of custom lcd settings + * + * @pixclock: the desired pixel clock + * + * Returns -1 on error, 0 on success. + * + * Handling the pixel_clock: + * + * Pixel clock is defined in the OMAP35x TRM as follows: + * pixel_clock = + * (SYS_CLK * 2 * PRCM.CM_CLKSEL2_PLL[18:8]) / + * (DSS.DISPC_DIVISOR[23:16] * DSS.DISPC_DIVISOR[6:0] * + * PRCM.CM_CLKSEL_DSS[4:0] * (PRCM.CM_CLKSEL2_PLL[6:0] + 1)) + * + * In practice, this means that in order to set the + * divisor for the desired pixel clock one needs to + * solve the following equation: + * + * 26 * 432 / (39 * <pixel_clock>) = DSS.DISPC_DIVISOR[6:0] + * + * NOTE: the explicit equation above is reduced. Do not + * try to infer anything from these numbers. + */ +static int parse_pixclock(char *pixclock) +{ + int divisor, pixclock_val; + char *pixclk_start = pixclock; + + pixclock_val = simple_strtoul(pixclock, &pixclock, 10); + divisor = DIV_ROUND_UP(PIXEL_CLK_NUMERATOR, pixclock_val); + /* 0 and 1 are illegal values for PCD */ + if (divisor <= 1) + divisor = 2; + + panel_cfg.divisor = divisor | (1 << 16); + if (pixclock[0] != '\0') { + printf("LCD: invalid value for pixclock:%s\n", pixclk_start); + return -1; + } + + return 0; +} + +/* + * parse_setting() - parse a single setting of custom lcd parameters + * + * @setting: The custom lcd setting <name>:<value> + * + * Returns -1 on failure, 0 on success. + */ +static int parse_setting(char *setting) +{ + int num_val; + char *setting_start = setting; + + if (!strncmp(setting, "mode:", 5)) { + return parse_mode(setting + 5); + } else if (!strncmp(setting, "pixclock:", 9)) { + return parse_pixclock(setting + 9); + } else if (!strncmp(setting, "left:", 5)) { + num_val = simple_strtoul(setting + 5, &setting, 0); + panel_cfg.timing_h |= DSS_HBP(num_val); + } else if (!strncmp(setting, "right:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_h |= DSS_HFP(num_val); + } else if (!strncmp(setting, "upper:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_v |= DSS_VBP(num_val); + } else if (!strncmp(setting, "lower:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_v |= DSS_VFP(num_val); + } else if (!strncmp(setting, "hsynclen:", 9)) { + num_val = simple_strtoul(setting + 9, &setting, 0); + panel_cfg.timing_h |= DSS_HSW(num_val); + } else if (!strncmp(setting, "vsynclen:", 9)) { + num_val = simple_strtoul(setting + 9, &setting, 0); + panel_cfg.timing_v |= DSS_VSW(num_val); + } else if (!strncmp(setting, "hsync:", 6)) { + if (simple_strtoul(setting + 6, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IHS; + else + panel_cfg.pol_freq &= ~DSS_IHS; + } else if (!strncmp(setting, "vsync:", 6)) { + if (simple_strtoul(setting + 6, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IVS; + else + panel_cfg.pol_freq &= ~DSS_IVS; + } else if (!strncmp(setting, "outputen:", 9)) { + if (simple_strtoul(setting + 9, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IEO; + else + panel_cfg.pol_freq &= ~DSS_IEO; + } else if (!strncmp(setting, "pixclockpol:", 12)) { + if (simple_strtoul(setting + 12, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IPC; + else + panel_cfg.pol_freq &= ~DSS_IPC; + } else if (!strncmp(setting, "active", 6)) { + panel_cfg.panel_type = ACTIVE_DISPLAY; + return 0; /* Avoid sanity check below */ + } else if (!strncmp(setting, "passive", 7)) { + panel_cfg.panel_type = PASSIVE_DISPLAY; + return 0; /* Avoid sanity check below */ + } else if (!strncmp(setting, "display:", 8)) { + if (!strncmp(setting + 8, "dvi", 3)) { + lcd_def = DVI_CUSTOM; + return 0; /* Avoid sanity check below */ + } + } else { + printf("LCD: unknown option %s\n", setting_start); + return -1; + } + + if (setting[0] != '\0') { + printf("LCD: invalid value for %s\n", setting_start); + return -1; + } + + return 0; +} + +/* + * env_parse_customlcd() - parse custom lcd params from an environment variable. + * + * @custom_lcd_params: The environment variable containing the lcd params. + * + * Returns -1 on failure, 0 on success. + */ +static int parse_customlcd(char *custom_lcd_params) +{ + char params_cpy[160]; + char *setting; + + strncpy(params_cpy, custom_lcd_params, 160); + setting = strtok(params_cpy, ","); + while (setting) { + if (parse_setting(setting) < 0) + return -1; + + setting = strtok(NULL, ","); + } + + /* Currently we don't support changing this via custom lcd params */ + panel_cfg.data_lines = LCD_INTERFACE_24_BIT; + panel_cfg.gfx_format = GFXFORMAT_RGB16; /* See dvi predefines note */ + + return 0; +} + +/* + * env_parse_displaytype() - parse display type. + * + * Parses the environment variable "displaytype", which contains the + * name of the display type or preset, in which case it applies its + * configurations. + * + * Returns the type of display that was specified. + */ +static enum display_type env_parse_displaytype(char *displaytype) +{ + if (!strncmp(displaytype, "dvi640x480", 10)) + return set_dvi_preset(preset_dvi_640X480, 640, 480); + else if (!strncmp(displaytype, "dvi800x600", 10)) + return set_dvi_preset(preset_dvi_800X600, 800, 600); + else if (!strncmp(displaytype, "dvi1024x768", 11)) + return set_dvi_preset(preset_dvi_1024X768, 1024, 768); + else if (!strncmp(displaytype, "dvi1152x864", 11)) + return set_dvi_preset(preset_dvi_1152X864, 1152, 864); + else if (!strncmp(displaytype, "dvi1280x960", 11)) + return set_dvi_preset(preset_dvi_1280X960, 1280, 960); + else if (!strncmp(displaytype, "dvi1280x1024", 12)) + return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024); + + return NONE; +} + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; +void *lcd_base; +short console_col; +short console_row; +void *lcd_console_address; + +void lcd_ctrl_init(void *lcdbase) +{ + struct prcm *prcm = (struct prcm *)PRCM_BASE; + char *custom_lcd; + char *displaytype = getenv("displaytype"); + + if (displaytype == NULL) + return; + + lcd_def = env_parse_displaytype(displaytype); + /* If we did not recognize the preset, check if it's an env variable */ + if (lcd_def == NONE) { + custom_lcd = getenv(displaytype); + if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0) + return; + } + + panel_cfg.frame_buffer = lcdbase; + omap3_dss_panel_config(&panel_cfg); + /* + * Pixel clock is defined with many divisions and only few + * multiplications of the system clock. Since DSS FCLK divisor is set + * to 16 by default, we need to set it to a smaller value, like 3 + * (chosen via trial and error). + */ + clrsetbits_le32(&prcm->clksel_dss, 0xF, 3); +} + +void lcd_enable(void) +{ + if (lcd_def == DVI || lcd_def == DVI_CUSTOM) { + gpio_direction_output(54, 0); /* Turn on DVI */ + omap3_dss_enable(); + } +} + +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {} diff --git a/board/cobra5272/u-boot.lds b/board/cobra5272/u-boot.lds index 47378fdf90..809a7055fd 100644 --- a/board/cobra5272/u-boot.lds +++ b/board/cobra5272/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds index 1cc482ffa1..1f006d7867 100644 --- a/board/cogent/u-boot.lds +++ b/board/cogent/u-boot.lds @@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/cogent/u-boot.lds.debug b/board/cogent/u-boot.lds.debug index dc8c4e958f..e88bd977d9 100644 --- a/board/cogent/u-boot.lds.debug +++ b/board/cogent/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c index c6c10717b7..2dca275d15 100644 --- a/board/comelit/dig297/dig297.c +++ b/board/comelit/dig297/dig297.c @@ -147,8 +147,7 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/compal/dts/tegra20-paz00.dts b/board/compal/dts/tegra20-paz00.dts index 31b064d418..780203cfb3 100644 --- a/board/compal/dts/tegra20-paz00.dts +++ b/board/compal/dts/tegra20-paz00.dts @@ -1,13 +1,15 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { - model = "Toshiba AC100 / Dynabook AZ"; - compatible = "compal,paz00", "nvidia,tegra20"; + model = "Toshiba AC100 / Dynabook AZ"; + compatible = "compal,paz00", "nvidia,tegra20"; aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000000"; }; memory { @@ -53,6 +55,19 @@ status = "disabled"; }; + sdhci@c8000000 { + status = "okay"; + cd-gpios = <&gpio 173 1>; /* gpio PV5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 169 0>; /* gpio PV1 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; + lcd_panel: panel { /* PAZ00 has 1024x600 */ clock = <54030000>; diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index 1447f47605..d6e5c3740e 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -18,19 +18,14 @@ #include <asm/io.h> #include <asm/arch/tegra.h> #include <asm/arch/pinmux.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif - #ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { /* SDMMC4: config 3, x8 on 2nd set of pins */ pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4); @@ -51,25 +46,6 @@ static void pin_mux_mmc(void) /* For CD GPIO PV5 */ pinmux_tristate_disable(PINGRP_GPV); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - debug("board_mmc_init: init eMMC\n"); - /* init dev 0, eMMC chip, with 8-bit bus */ - tegra_mmc_init(0, 8, -1, -1); - - debug("board_mmc_init: init SD slot\n"); - /* init dev 3, SD slot, with 4-bit bus */ - tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5); - - return 0; -} #endif #ifdef CONFIG_LCD diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts index 7aeed670db..ee31476c1e 100644 --- a/board/compulab/dts/tegra20-trimslice.dts +++ b/board/compulab/dts/tegra20-trimslice.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "Compulab TrimSlice board"; @@ -9,6 +9,8 @@ aliases { usb0 = "/usb@c5008000"; usb1 = "/usb@c5000000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000000"; }; memory { @@ -47,4 +49,16 @@ usb@c5004000 { status = "disabled"; }; + + sdhci@c8000000 { + status = "okay"; + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 121 1>; /* gpio PP1 */ + wp-gpios = <&gpio 122 0>; /* gpio PP2 */ + bus-width = <4>; + }; }; diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 8f4dd09faa..8401100b18 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -27,12 +27,8 @@ #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> #include <i2c.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif void pin_mux_usb(void) { @@ -52,7 +48,7 @@ void pin_mux_spi(void) * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC1, FUNCMUX_SDMMC1_SDIO1_4BIT); funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT); @@ -60,20 +56,3 @@ static void pin_mux_mmc(void) /* For CD GPIO PP1 */ pinmux_tristate_disable(PINGRP_DAP3); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - /* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */ - tegra_mmc_init(0, 4, -1, GPIO_PP1); - - /* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */ - tegra_mmc_init(3, 4, -1, -1); - - return 0; -} diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c index 56fe495277..5c02eaf2ec 100644 --- a/board/corscience/tricorder/tricorder.c +++ b/board/corscience/tricorder/tricorder.c @@ -80,7 +80,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !(defined(CONFIG_SPL_BUILD)) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/cray/L1/u-boot.lds.debug b/board/cray/L1/u-boot.lds.debug index d7a2e56008..99cbed4b47 100644 --- a/board/cray/L1/u-boot.lds.debug +++ b/board/cray/L1/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds index 512fe1a6d4..663100e580 100644 --- a/board/dave/PPChameleonEVB/u-boot.lds +++ b/board/dave/PPChameleonEVB/u-boot.lds @@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds index 6d287f1e3e..bc34fb5819 100644 --- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds +++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds @@ -49,11 +49,6 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } >.sram - - . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds index e3a07cc8ed..2557830f94 100644 --- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds +++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds @@ -58,11 +58,6 @@ SECTIONS } . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - . = ALIGN(4); __rel_dyn_start = .; __rel_dyn_end = .; __dynsym_start = .; diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c index d93efafad0..aff7c1fe5e 100644 --- a/board/denx/m28evk/m28evk.c +++ b/board/denx/m28evk/m28evk.c @@ -57,6 +57,10 @@ int board_early_init_f(void) mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 | MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP); gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0); + + mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 | + MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP); + gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0); #endif return 0; diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds index ed910033d5..b13d3e1ec3 100644 --- a/board/dvlhost/u-boot.lds +++ b/board/dvlhost/u-boot.lds @@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4); @@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + __bss_end = .; } - __bss_end =.; + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds index 3c1c05aa95..a1481c8699 100644 --- a/board/eltec/mhpc/u-boot.lds +++ b/board/eltec/mhpc/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug index 92796e6744..614bbb20b6 100644 --- a/board/eltec/mhpc/u-boot.lds.debug +++ b/board/eltec/mhpc/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds index 155fa7614e..e3f7d809b6 100644 --- a/board/emk/top860/u-boot.lds +++ b/board/emk/top860/u-boot.lds @@ -70,7 +70,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds index 7baaad89d3..c00b3c39f8 100644 --- a/board/ep88x/u-boot.lds +++ b/board/ep88x/u-boot.lds @@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds index cb94a51ee1..4297b8ba05 100644 --- a/board/esd/dasa_sim/u-boot.lds +++ b/board/esd/dasa_sim/u-boot.lds @@ -76,7 +76,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds index 101b893d08..6a5cef6c8c 100644 --- a/board/esd/pmc440/u-boot-nand.lds +++ b/board/esd/pmc440/u-boot-nand.lds @@ -104,7 +104,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/esd/tasreg/u-boot.lds b/board/esd/tasreg/u-boot.lds index fd77fa96b7..a4d9da7aaf 100644 --- a/board/esd/tasreg/u-boot.lds +++ b/board/esd/tasreg/u-boot.lds @@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds index 7ffdc17dae..642f1c9ecf 100644 --- a/board/esteem192e/u-boot.lds +++ b/board/esteem192e/u-boot.lds @@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds index 4b956f8d88..44c61eb82c 100644 --- a/board/evb64260/u-boot.lds +++ b/board/evb64260/u-boot.lds @@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds index 1cb191c913..0e2206c222 100644 --- a/board/fads/u-boot.lds +++ b/board/fads/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds index 3c1c05aa95..a1481c8699 100644 --- a/board/flagadm/u-boot.lds +++ b/board/flagadm/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug index 92796e6744..614bbb20b6 100644 --- a/board/flagadm/u-boot.lds.debug +++ b/board/flagadm/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg index c86cd407a2..f4cae5eeb9 100644 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg @@ -109,12 +109,12 @@ DATA 4 0x021b4828 0x33333333 DATA 4 0x021b0018 0x00081740 DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b000c 0x555A7975 -DATA 4 0x021b0010 0xFF538E64 +DATA 4 0x021b000c 0x555A7974 +DATA 4 0x021b0010 0xDB538F64 DATA 4 0x021b0014 0x01FF00DB DATA 4 0x021b002c 0x000026D2 -DATA 4 0x021b0030 0x005B0E21 +DATA 4 0x021b0030 0x005A1023 DATA 4 0x021b0008 0x09444040 DATA 4 0x021b0004 0x00025576 DATA 4 0x021b0040 0x00000027 @@ -126,8 +126,8 @@ DATA 4 0x021b001c 0x00008033 DATA 4 0x021b001c 0x0000803B DATA 4 0x021b001c 0x00428031 DATA 4 0x021b001c 0x00428039 -DATA 4 0x021b001c 0x09408030 -DATA 4 0x021b001c 0x09408038 +DATA 4 0x021b001c 0x19308030 +DATA 4 0x021b001c 0x19308038 DATA 4 0x021b001c 0x04008040 DATA 4 0x021b001c 0x04008048 diff --git a/board/freescale/m5208evbe/u-boot.lds b/board/freescale/m5208evbe/u-boot.lds index da4b4f2949..6f80e41159 100644 --- a/board/freescale/m5208evbe/u-boot.lds +++ b/board/freescale/m5208evbe/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds index e3f8847d10..9db171ed4e 100644 --- a/board/freescale/m52277evb/u-boot.lds +++ b/board/freescale/m52277evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds index c324b646b1..f11d4831be 100644 --- a/board/freescale/m5235evb/u-boot.lds +++ b/board/freescale/m5235evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds index 47378fdf90..809a7055fd 100644 --- a/board/freescale/m5249evb/u-boot.lds +++ b/board/freescale/m5249evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5253demo/u-boot.lds b/board/freescale/m5253demo/u-boot.lds index d14a2af614..9de88852ab 100644 --- a/board/freescale/m5253demo/u-boot.lds +++ b/board/freescale/m5253demo/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds index 47378fdf90..809a7055fd 100644 --- a/board/freescale/m5253evbe/u-boot.lds +++ b/board/freescale/m5253evbe/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds index c7574c95ac..82b67d50a9 100644 --- a/board/freescale/m5271evb/u-boot.lds +++ b/board/freescale/m5271evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5272c3/u-boot.lds b/board/freescale/m5272c3/u-boot.lds index 47378fdf90..809a7055fd 100644 --- a/board/freescale/m5272c3/u-boot.lds +++ b/board/freescale/m5272c3/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds index 7f3b73d55d..fda4cf426d 100644 --- a/board/freescale/m5275evb/u-boot.lds +++ b/board/freescale/m5275evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5282evb/u-boot.lds b/board/freescale/m5282evb/u-boot.lds index 35d669c442..cdfd0e4164 100644 --- a/board/freescale/m5282evb/u-boot.lds +++ b/board/freescale/m5282evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m53017evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds index 1a6f0cdc7b..c40c565922 100644 --- a/board/freescale/m53017evb/u-boot.lds +++ b/board/freescale/m53017evb/u-boot.lds @@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds index f5cc586d6f..f803e4af05 100644 --- a/board/freescale/m5329evb/u-boot.lds +++ b/board/freescale/m5329evb/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds index 11aa09271b..264e43f54d 100644 --- a/board/freescale/m5373evb/u-boot.lds +++ b/board/freescale/m5373evb/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m54418twr/u-boot.lds b/board/freescale/m54418twr/u-boot.lds index 5ae7fce2b6..3247dbf6d1 100644 --- a/board/freescale/m54418twr/u-boot.lds +++ b/board/freescale/m54418twr/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m54451evb/u-boot.lds b/board/freescale/m54451evb/u-boot.lds index 2bd4a73b8c..fd1289ec87 100644 --- a/board/freescale/m54451evb/u-boot.lds +++ b/board/freescale/m54451evb/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds index 5ae7fce2b6..3247dbf6d1 100644 --- a/board/freescale/m54455evb/u-boot.lds +++ b/board/freescale/m54455evb/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds index 5e987bb7a2..bbe36f087a 100644 --- a/board/freescale/m547xevb/u-boot.lds +++ b/board/freescale/m547xevb/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds index 27340ee3e2..9315927761 100644 --- a/board/freescale/m548xevb/u-boot.lds +++ b/board/freescale/m548xevb/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/freescale/mx23evk/spl_boot.c b/board/freescale/mx23evk/spl_boot.c index 6007433605..b6f4e7eff2 100644 --- a/board/freescale/mx23evk/spl_boot.c +++ b/board/freescale/mx23evk/spl_boot.c @@ -98,6 +98,16 @@ const iomux_cfg_t iomux_setup[] = { (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; +#define HW_DRAM_CTL14 (0x38 >> 2) +#define CS_MAP 0x3 +#define INTAREF 0x2 +#define HW_DRAM_CTL14_CONFIG (INTAREF << 8 | CS_MAP) + +void mxs_adjust_memory_params(uint32_t *dram_vals) +{ + dram_vals[HW_DRAM_CTL14] = HW_DRAM_CTL14_CONFIG; +} + void board_init_ll(void) { mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 4d1858bd4a..264c4e80ad 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -60,7 +60,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); @@ -80,11 +80,17 @@ SECTIONS _end = .; - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; - *(.bss) + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { + *(.bss*) . = ALIGN(4); - __bss_end = .; + __bss_end = .; + } + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); } /DISCARD/ : { *(.bss*) } diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index ee20d4fc28..ff7f5e83a0 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -23,7 +23,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx6x_pins.h> +#include <asm/arch/mx6q_pins.h> #include <asm/arch/clock.h> #include <asm/errno.h> #include <asm/gpio.h> @@ -55,53 +55,53 @@ int dram_init(void) } iomux_v3_cfg_t const uart4_pads[] = { - MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; iomux_v3_cfg_t const usdhc3_pads[] = { - MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const usdhc4_pads[] = { - MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; iomux_v3_cfg_t const enet_pads[] = { - MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), }; diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 9e3700e1ee..91cc0073bd 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -22,7 +22,7 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/iomux.h> -#include <asm/arch/mx6x_pins.h> +#include <asm/arch/mx6q_pins.h> #include <asm/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> @@ -54,26 +54,26 @@ int dram_init(void) } iomux_v3_cfg_t const uart4_pads[] = { - MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; iomux_v3_cfg_t const enet_pads[] = { - MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), }; static void setup_iomux_enet(void) @@ -82,18 +82,18 @@ static void setup_iomux_enet(void) } iomux_v3_cfg_t const usdhc3_pads[] = { - MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_GPIO_18__USDHC3_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_CS2__GPIO_6_15 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_GPIO_18__USDHC3_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_CS2__GPIO_6_15 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static void setup_iomux_uart(void) diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index f010d0c60d..5b69a6d2de 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -25,7 +25,7 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/iomux.h> -#include <asm/arch/mx6x_pins.h> +#include <asm/arch/mx6q_pins.h> #include <asm/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> @@ -46,12 +46,12 @@ DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) #define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ @@ -72,19 +72,19 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { - gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); - return 0; + return 0; } iomux_v3_cfg_t const uart1_pads[] = { - MX6Q_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; iomux_v3_cfg_t const uart2_pads[] = { - MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) @@ -92,13 +92,13 @@ iomux_v3_cfg_t const uart2_pads[] = { /* I2C1, SGTL5000 */ struct i2c_pads_info i2c_pad_info0 = { .scl = { - .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC, - .gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC, + .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_EIM_D21__GPIO_3_21 | PC, .gp = IMX_GPIO_NR(3, 21) }, .sda = { - .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC, - .gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC, + .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D28__GPIO_3_28 | PC, .gp = IMX_GPIO_NR(3, 28) } }; @@ -106,13 +106,13 @@ struct i2c_pads_info i2c_pad_info0 = { /* I2C2 Camera, MIPI */ struct i2c_pads_info i2c_pad_info1 = { .scl = { - .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC, - .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC, + .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, + .gpio_mode = MX6_PAD_KEY_COL3__GPIO_4_12 | PC, .gp = IMX_GPIO_NR(4, 12) }, .sda = { - .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC, - .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC, + .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC, + .gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC, .gp = IMX_GPIO_NR(4, 13) } }; @@ -120,86 +120,86 @@ struct i2c_pads_info i2c_pad_info1 = { /* I2C3, J15 - RGB connector */ struct i2c_pads_info i2c_pad_info2 = { .scl = { - .i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC, - .gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC, + .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC, + .gpio_mode = MX6_PAD_GPIO_5__GPIO_1_5 | PC, .gp = IMX_GPIO_NR(1, 5) }, .sda = { - .i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC, - .gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC, + .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC, .gp = IMX_GPIO_NR(7, 11) } }; iomux_v3_cfg_t const usdhc3_pads[] = { - MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const usdhc4_pads[] = { - MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const enet_pads1[] = { - MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), /* pin 35 - 1 (PHY_AD2) on reset */ - MX6Q_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 32 - 1 - (MODE0) all */ - MX6Q_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 31 - 1 - (MODE1) all */ - MX6Q_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 28 - 1 - (MODE2) all */ - MX6Q_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 27 - 1 - (MODE3) all */ - MX6Q_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */ - MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 42 PHY nRST */ - MX6Q_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), }; iomux_v3_cfg_t const enet_pads2[] = { - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), }; /* Button assignments for J14 */ static iomux_v3_cfg_t const button_pads[] = { /* Menu */ - MX6Q_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Back */ - MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Labelled Search (mapped to Power under Android) */ - MX6Q_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Home */ - MX6Q_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Volume Down */ - MX6Q_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Volume Up */ - MX6Q_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), }; static void setup_iomux_enet(void) @@ -221,13 +221,13 @@ static void setup_iomux_enet(void) } iomux_v3_cfg_t const usb_pads[] = { - MX6Q_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); - imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); } #ifdef CONFIG_USB_EHCI_MX6 @@ -246,55 +246,55 @@ int board_ehci_hcd_init(int port) #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg usdhc_cfg[2] = { - {USDHC3_BASE_ADDR}, - {USDHC4_BASE_ADDR}, + {USDHC3_BASE_ADDR}, + {USDHC4_BASE_ADDR}, }; int board_mmc_getcd(struct mmc *mmc) { - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret; + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret; - if (cfg->esdhc_base == USDHC3_BASE_ADDR) { + if (cfg->esdhc_base == USDHC3_BASE_ADDR) { gpio_direction_input(IMX_GPIO_NR(7, 0)); ret = !gpio_get_value(IMX_GPIO_NR(7, 0)); - } else { + } else { gpio_direction_input(IMX_GPIO_NR(2, 6)); ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); - } + } - return ret; + return ret; } int board_mmc_init(bd_t *bis) { - s32 status = 0; - u32 index = 0; + s32 status = 0; + u32 index = 0; usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { - switch (index) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); break; default: - printf("Warning: you configured more USDHC controllers" + printf("Warning: you configured more USDHC controllers" "(%d) then supported by the board (%d)\n", index + 1, CONFIG_SYS_FSL_USDHC_NUM); - return status; - } + return status; + } - status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); - } + status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + } - return status; + return status; } #endif @@ -306,10 +306,10 @@ u32 get_board_rev(void) #ifdef CONFIG_MXC_SPI iomux_v3_cfg_t const ecspi1_pads[] = { /* SS1 */ - MX6Q_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6Q_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6Q_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6Q_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), }; void setup_spi(void) @@ -403,44 +403,44 @@ int setup_sata(void) static iomux_v3_cfg_t const backlight_pads[] = { /* Backlight on RGB connector: J15 */ - MX6Q_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL), #define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21) /* Backlight on LVDS connector: J6 */ - MX6Q_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL), #define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18) }; static iomux_v3_cfg_t const rgb_pads[] = { - MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, - MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15, - MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2, - MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3, - MX6Q_PAD_DI0_PIN4__GPIO_4_20, - MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0, - MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1, - MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2, - MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3, - MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4, - MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5, - MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6, - MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7, - MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8, - MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9, - MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10, - MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11, - MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12, - MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13, - MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14, - MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15, - MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16, - MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17, - MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18, - MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19, - MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20, - MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21, - MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22, - MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23, + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2, + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3, + MX6_PAD_DI0_PIN4__GPIO_4_20, + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0, + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1, + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2, + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3, + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4, + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5, + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6, + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7, + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8, + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9, + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10, + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11, + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12, + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13, + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14, + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15, + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16, + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17, + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18, + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19, + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20, + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21, + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22, + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23, }; struct display_info_t { @@ -455,32 +455,26 @@ struct display_info_t { static int detect_hdmi(struct display_info_t const *dev) { - return __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0) & HDMI_PHY_HPD; + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; + return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; } static void enable_hdmi(struct display_info_t const *dev) { + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; u8 reg; printf("%s: setup HDMI monitor\n", __func__); - reg = __raw_readb( - HDMI_ARB_BASE_ADDR - +HDMI_PHY_CONF0); + reg = readb(&hdmi->phy_conf0); reg |= HDMI_PHY_CONF0_PDZ_MASK; - __raw_writeb(reg, - HDMI_ARB_BASE_ADDR - +HDMI_PHY_CONF0); + writeb(reg, &hdmi->phy_conf0); + udelay(3000); reg |= HDMI_PHY_CONF0_ENTMDS_MASK; - __raw_writeb(reg, - HDMI_ARB_BASE_ADDR - +HDMI_PHY_CONF0); + writeb(reg, &hdmi->phy_conf0); udelay(3000); reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK; - __raw_writeb(reg, - HDMI_ARB_BASE_ADDR - +HDMI_PHY_CONF0); - __raw_writeb(HDMI_MC_PHYRSTZ_ASSERT, - HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ); + writeb(reg, &hdmi->phy_conf0); + writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz); } static int detect_i2c(struct display_info_t const *dev) @@ -638,6 +632,7 @@ static void setup_display(void) struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; int reg; @@ -654,8 +649,7 @@ static void setup_display(void) writel(reg, &mxc_ccm->CCGR2); /* clear HDMI PHY reset */ - __raw_writeb(HDMI_MC_PHYRSTZ_DEASSERT, - HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ); + writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz); /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); @@ -732,8 +726,8 @@ int overwrite_console(void) int board_init(void) { - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; #ifdef CONFIG_MXC_SPI setup_spi(); @@ -746,14 +740,14 @@ int board_init(void) setup_sata(); #endif - return 0; + return 0; } int checkboard(void) { - puts("Board: MX6Q-Sabre Lite\n"); + puts("Board: MX6Q-Sabre Lite\n"); - return 0; + return 0; } struct button_key { diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c index 65c4a1a4f3..2b3926aaf3 100644 --- a/board/freescale/mx6qsabresd/mx6qsabresd.c +++ b/board/freescale/mx6qsabresd/mx6qsabresd.c @@ -22,7 +22,7 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/iomux.h> -#include <asm/arch/mx6x_pins.h> +#include <asm/arch/mx6q_pins.h> #include <asm/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> @@ -52,28 +52,28 @@ int dram_init(void) } iomux_v3_cfg_t const uart1_pads[] = { - MX6Q_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; iomux_v3_cfg_t const enet_pads[] = { - MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), /* AR8031 PHY Reset */ - MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_ENET_CRS_DV__GPIO_1_25 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static void setup_iomux_enet(void) @@ -87,44 +87,44 @@ static void setup_iomux_enet(void) } iomux_v3_cfg_t const usdhc2_pads[] = { - MX6Q_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const usdhc3_pads[] = { - MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D0__GPIO_2_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D0__GPIO_2_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const usdhc4_pads[] = { - MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; static void setup_iomux_uart(void) diff --git a/board/gaisler/gr_cpci_ax2000/u-boot.lds b/board/gaisler/gr_cpci_ax2000/u-boot.lds index 70ebf4d725..60039ccfb4 100644 --- a/board/gaisler/gr_cpci_ax2000/u-boot.lds +++ b/board/gaisler/gr_cpci_ax2000/u-boot.lds @@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : diff --git a/board/gaisler/gr_ep2s60/u-boot.lds b/board/gaisler/gr_ep2s60/u-boot.lds index 429b579300..ec73f737cd 100644 --- a/board/gaisler/gr_ep2s60/u-boot.lds +++ b/board/gaisler/gr_ep2s60/u-boot.lds @@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : diff --git a/board/gaisler/gr_xc3s_1500/u-boot.lds b/board/gaisler/gr_xc3s_1500/u-boot.lds index 705212922b..18dfb814bf 100644 --- a/board/gaisler/gr_xc3s_1500/u-boot.lds +++ b/board/gaisler/gr_xc3s_1500/u-boot.lds @@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : diff --git a/board/gaisler/grsim/u-boot.lds b/board/gaisler/grsim/u-boot.lds index c608284166..8de272e4cb 100644 --- a/board/gaisler/grsim/u-boot.lds +++ b/board/gaisler/grsim/u-boot.lds @@ -87,7 +87,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : diff --git a/board/gaisler/grsim_leon2/u-boot.lds b/board/gaisler/grsim_leon2/u-boot.lds index eafb4f07c1..e57f734121 100644 --- a/board/gaisler/grsim_leon2/u-boot.lds +++ b/board/gaisler/grsim_leon2/u-boot.lds @@ -87,7 +87,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : diff --git a/board/gen860t/u-boot-flashenv.lds b/board/gen860t/u-boot-flashenv.lds index f5c757e576..30138dd814 100644 --- a/board/gen860t/u-boot-flashenv.lds +++ b/board/gen860t/u-boot-flashenv.lds @@ -73,7 +73,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/gen860t/u-boot.lds b/board/gen860t/u-boot.lds index d2649a8575..08fb4aa1fd 100644 --- a/board/gen860t/u-boot.lds +++ b/board/gen860t/u-boot.lds @@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds index 15575e4ecc..b351a68110 100644 --- a/board/genietv/u-boot.lds +++ b/board/genietv/u-boot.lds @@ -83,7 +83,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug index e1cf249650..a3aeb604cc 100644 --- a/board/genietv/u-boot.lds.debug +++ b/board/genietv/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds index d2a2f22d4f..8e58963759 100644 --- a/board/hermes/u-boot.lds +++ b/board/hermes/u-boot.lds @@ -75,7 +75,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug index e84cc7991e..4383c492c3 100644 --- a/board/hermes/u-boot.lds.debug +++ b/board/hermes/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 9fe6408ecf..923461a390 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -114,7 +114,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif @@ -130,6 +130,7 @@ static struct panel_config lcd_cfg = { .load_mode = 0x02, /* Frame Mode */ .panel_color = 0, .lcd_size = PANEL_LCD_SIZE(800, 480), + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }; int board_video_init(void) diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds index c9f0f37953..5d1c2ad3cb 100644 --- a/board/hymod/u-boot.lds +++ b/board/hymod/u-boot.lds @@ -113,7 +113,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug index dc8c4e958f..e88bd977d9 100644 --- a/board/hymod/u-boot.lds.debug +++ b/board/hymod/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds index 9ff187c481..6e4939b8bf 100644 --- a/board/icu862/u-boot.lds +++ b/board/icu862/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug index 3e075a85bd..9995288517 100644 --- a/board/icu862/u-boot.lds.debug +++ b/board/icu862/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds index fd77fa96b7..5b8d3b3715 100644 --- a/board/idmr/u-boot.lds +++ b/board/idmr/u-boot.lds @@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/ip860/u-boot.lds b/board/ip860/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/ip860/u-boot.lds +++ b/board/ip860/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug index e47aff0fa7..0b34177531 100644 --- a/board/ip860/u-boot.lds.debug +++ b/board/ip860/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 49fcf34893..2bac916576 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -150,8 +150,7 @@ static inline void setup_net_chip(void) {} #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h index ea1e9acab3..5ef22aeda4 100644 --- a/board/isee/igep00x0/igep00x0.h +++ b/board/isee/igep00x0/igep00x0.h @@ -34,10 +34,13 @@ const omap3_sysinfo sysinfo = { DDR_STACKED, #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) - "OMAP3 IGEP v2 board", + "IGEPv2", #endif #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) - "OMAP3 IGEP COM Module", + "IGEP COM MODULE/ELECTRON", +#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) + "IGEP COM PROTON", #endif #if defined(CONFIG_ENV_IS_IN_ONENAND) "ONENAND", diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds index 838c07bbb2..1b43dbe788 100644 --- a/board/ivm/u-boot.lds +++ b/board/ivm/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/ivm/u-boot.lds.debug b/board/ivm/u-boot.lds.debug index 53a19b2947..bae9fb28ee 100644 --- a/board/ivm/u-boot.lds.debug +++ b/board/ivm/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds index 90d2135340..52c929cab9 100644 --- a/board/korat/u-boot-F7FC.lds +++ b/board/korat/u-boot-F7FC.lds @@ -110,7 +110,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/kup/kup4k/u-boot.lds +++ b/board/kup/kup4k/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug index b43a1e4281..88c410cd92 100644 --- a/board/kup/kup4k/u-boot.lds.debug +++ b/board/kup/kup4k/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/kup/kup4x/u-boot.lds +++ b/board/kup/kup4x/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug index b43a1e4281..88c410cd92 100644 --- a/board/kup/kup4x/u-boot.lds.debug +++ b/board/kup/kup4x/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index 0b3721ed85..65e1b78457 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -135,8 +135,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index 12bcfcb877..6e83aa2094 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -140,7 +140,7 @@ int board_init(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index 90b6b0fde5..c79a261d23 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -92,8 +92,7 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index 8e18019801..ad6ae36696 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -183,8 +183,7 @@ void set_muxconf_regs (void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds index 279605b26b..ce11a91da6 100644 --- a/board/lwmon/u-boot.lds +++ b/board/lwmon/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug index 0a3e6466a9..1d1b76ad7c 100644 --- a/board/lwmon/u-boot.lds.debug +++ b/board/lwmon/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/manroland/uc100/u-boot.lds b/board/manroland/uc100/u-boot.lds index ac6af1a3a4..d1bb127888 100644 --- a/board/manroland/uc100/u-boot.lds +++ b/board/manroland/uc100/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/matrix_vision/mvblx/fpga.c b/board/matrix_vision/mvblx/fpga.c index dacc13845d..3fcf9685e9 100644 --- a/board/matrix_vision/mvblx/fpga.c +++ b/board/matrix_vision/mvblx/fpga.c @@ -31,6 +31,7 @@ #include <ACEX1K.h> #include <command.h> #include <asm/gpio.h> +#include <linux/byteorder/generic.h> #include "fpga.h" #ifdef FPGA_DEBUG @@ -209,9 +210,20 @@ int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie) { unsigned char *data = (unsigned char *) buf; int i; + int headerlen = len - cyclone2.size; + + if (headerlen < 0) + return FPGA_FAIL; + else if (headerlen == sizeof(uint32_t)) { + const unsigned int fpgavers_len = 11; /* '0x' + 8 hex digits + \0 */ + char fpgavers_str[fpgavers_len]; + snprintf(fpgavers_str, fpgavers_len, "0x%08x", + be32_to_cpup((uint32_t*)data)); + setenv("fpgavers", fpgavers_str); + } fpga_debug("fpga_wr: buf %p / size %d\n", buf, len); - for (i = 0; i < len; i++) + for (i = headerlen; i < len; i++) _write_fpga(data[i]); fpga_debug("-%s\n", __func__); diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c index f68f312215..49af384aaa 100644 --- a/board/matrix_vision/mvblx/mvblx.c +++ b/board/matrix_vision/mvblx/mvblx.c @@ -106,8 +106,8 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } #endif diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c index 945a36dfe6..15269c6d7a 100644 --- a/board/matrix_vision/mvblx/sys_eeprom.c +++ b/board/matrix_vision/mvblx/sys_eeprom.c @@ -326,10 +326,28 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +static inline int is_portrait(void) +{ + int i; + unsigned int orient_index = 0; /* idx of char which determines orientation */ + + for (i = sizeof(e.id)/sizeof(*e.id) - 1; i>=0; i--) { + if (e.id[i] == '-') { + orient_index = i+1; + break; + } + } + + return (orient_index && + (e.id[orient_index] >= '5') && (e.id[orient_index] <= '8')); +} + int mac_read_from_eeprom(void) { u32 crc, crc_offset = offsetof(struct eeprom, crc); u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ +#define FILENAME_LANDSCAPE "mvBlueLynx_X.rbf" +#define FILENAME_PORTRAIT "mvBlueLynx_X_sensor_cd.rbf" if (read_eeprom()) { printf("EEPROM Read failed.\n"); @@ -374,6 +392,12 @@ int mac_read_from_eeprom(void) setenv("serial#", serial_num); } + /* decide which fpga file to load depending on orientation */ + if (is_portrait()) + setenv("fpgafilename", FILENAME_PORTRAIT); + else + setenv("fpgafilename", FILENAME_LANDSCAPE); + /* TODO should I calculate CRC here? */ return 0; } diff --git a/board/matrix_vision/mvsmr/u-boot.lds b/board/matrix_vision/mvsmr/u-boot.lds index 4c464d15ed..3225c0bb2a 100644 --- a/board/matrix_vision/mvsmr/u-boot.lds +++ b/board/matrix_vision/mvsmr/u-boot.lds @@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/mbx8xx/u-boot.lds +++ b/board/mbx8xx/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/mbx8xx/u-boot.lds.debug b/board/mbx8xx/u-boot.lds.debug index 4155b604fb..063f2cc92f 100644 --- a/board/mbx8xx/u-boot.lds.debug +++ b/board/mbx8xx/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds index 0bcf2ee6eb..17ff94e5da 100644 --- a/board/mousse/u-boot.lds +++ b/board/mousse/u-boot.lds @@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug index d7a2e56008..99cbed4b47 100644 --- a/board/mpl/pip405/u-boot.lds.debug +++ b/board/mpl/pip405/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/mvblue/u-boot.lds b/board/mvblue/u-boot.lds index cb4a07c57f..adbb5f9dac 100644 --- a/board/mvblue/u-boot.lds +++ b/board/mvblue/u-boot.lds @@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds index e63a8c9fab..03891e937f 100644 --- a/board/netphone/u-boot.lds +++ b/board/netphone/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug index 900da64859..e1fe052c37 100644 --- a/board/netphone/u-boot.lds.debug +++ b/board/netphone/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds index e63a8c9fab..03891e937f 100644 --- a/board/netta/u-boot.lds +++ b/board/netta/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug index 900da64859..e1fe052c37 100644 --- a/board/netta/u-boot.lds.debug +++ b/board/netta/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds index e63a8c9fab..03891e937f 100644 --- a/board/netta2/u-boot.lds +++ b/board/netta2/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug index 900da64859..e1fe052c37 100644 --- a/board/netta2/u-boot.lds.debug +++ b/board/netta2/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds index e63a8c9fab..03891e937f 100644 --- a/board/netvia/u-boot.lds +++ b/board/netvia/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug index 6cbf4dc66e..3243fc0f36 100644 --- a/board/netvia/u-boot.lds.debug +++ b/board/netvia/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index b2fe1c531a..48eb65f896 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -671,7 +671,7 @@ int rx51_kp_getc(void) */ int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } diff --git a/board/ns9750dev/config.mk b/board/ns9750dev/config.mk deleted file mode 100644 index e5d87029d3..0000000000 --- a/board/ns9750dev/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -####################################################################### -# -# Copyright (C) 2004 by FS Forth-Systeme GmbH. -# Markus Pietrek <mpietrek@fsforth.de> -# -# @TODO -# Linux-Kernel is expected to be at 0000'8000, entry 0000'8000 -# optionally with a ramdisk at 0080'0000 -# -# we load ourself to 0078'0000 -# -# download area is 0060'0000 -# - - -CONFIG_SYS_TEXT_BASE = 0x00780000 diff --git a/board/ns9750dev/flash.c b/board/ns9750dev/flash.c deleted file mode 100644 index 185bc2d73a..0000000000 --- a/board/ns9750dev/flash.c +++ /dev/null @@ -1,474 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <linux/byteorder/swab.h> - -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#undef FLASH_PORT_WIDTH32 -#define FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - - -/* Flash Organization Structure */ -typedef struct OrgDef { - unsigned int sector_number; - unsigned int sector_size; -} OrgDef; - - -/* Flash Organizations */ -OrgDef OrgIntel_28F256L18T[] = { - {4, 32 * 1024}, /* 4 * 32kBytes sectors */ - {255, 128 * 1024}, /* 255 * 128kBytes sectors */ -}; - - -/*----------------------------------------------------------------------- - * Functions - */ -unsigned long flash_init (void); -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); -void flash_print_info (flash_info_t * info); -void flash_unprotect_sectors (FPWV * addr); -int flash_erase (flash_info_t * info, int s_first, int s_last); -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - OrgDef *pOrgDef; - - pOrgDef = OrgIntel_28F256L18T; - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - if (i > 255) { - info->start[i] = base + (i * 0x8000); - info->protect[i] = 0; - } else { - info->start[i] = base + - (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F256L18T: - printf ("FLASH 28F256L18T\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - switch (value) { - - case (FPW) (INTEL_ID_28F256L18T): - info->flash_id += FLASH_28F256L18T; - info->sector_count = 259; - info->size = 0x02000000; - break; /* => 32 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/* unprotects a sector for write and erase - * on some intel parts, this unprotects the entire chip, but it - * wont hurt to call this additional times per sector... - */ -void flash_unprotect_sectors (FPWV * addr) -{ -#define PD_FINTEL_WSMS_READY_MASK 0x0080 - - *addr = (FPW) 0x00500050; /* clear status register */ - - /* this sends the clear lock bit command */ - *addr = (FPW) 0x00600060; - *addr = (FPW) 0x00D000D0; -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - flash_unprotect_sectors (addr); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - *addr = (FPW) 0x00500050;/* clear status register */ - *addr = (FPW) 0x00200020;/* erase setup */ - *addr = (FPW) 0x00D000D0;/* erase confirm */ - - while (((status = - *addr) & (FPW) 0x00800080) != - (FPW) 0x00800080) { - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - /* reset to read mode */ - *addr = (FPW) 0x00FF00FF; - rcode = 1; - break; - } - } - - /* clear status register cmd. */ - *addr = (FPW) 0x00500050; - *addr = (FPW) 0x00FF00FF;/* resest to read mode */ - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - int flag; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); - return (2); - } - flash_unprotect_sectors (addr); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/ns9750dev/led.c b/board/ns9750dev/led.c deleted file mode 100644 index b85c869d85..0000000000 --- a/board/ns9750dev/led.c +++ /dev/null @@ -1,46 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: led.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Defines helper functions for toggeling LEDs - * @Usage: - * @References: [1] - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifdef CONFIG_STATUS_LED - -#include <ns9750_bbus.h> - -static inline void __led_init( led_id_t mask, int state ) -{ - XXXX; -} - -static inline void __led_toggle( led_id_t mask ) -{ -} - -static inline void __led_set( led_id_t mask, int state ) -{ -} - -#endif /* CONFIG_STATUS_LED */ diff --git a/board/ns9750dev/lowlevel_init.S b/board/ns9750dev/lowlevel_init.S deleted file mode 100644 index ba5ff8124e..0000000000 --- a/board/ns9750dev/lowlevel_init.S +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * Modified for the NS9750 DevBoard by - * (C) Copyright 2004 by FS Forth-Systeme GmbH. - * Markus Pietrek <mpietrek@fsforth.de> - * @References: [1] NS9750 Hardware Reference/December 2003 - * [2] ns9750_a.cmd from MAJIC configuration - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -#if defined(CONFIG_NS9750DEV) -# ifndef CONFIG_SKIP_LOWLEVEL_INIT -# include <./ns9750_sys.h> -# include <./ns9750_mem.h> -# endif -#endif - -/*********************************************************************** - * @Function: write_register_block - * @Return: nothing - * @Descr: Copies the register block of register_offset:register value to - * the registers at base r0. The block is assumed to start in RAM at r1 - * and end at r2. The linked RAM base address of U-Boot is assumed to be - * in r5 while the ROM base address we are running from is r6 - * Uses r3 and r4 as tempory registers - ***********************************************************************/ - -.macro write_register_block - @@ map the addresses to high memory - sub r1, r1, r5 - add r1, r1, r6 - sub r2, r2, r5 - add r2, r2, r6 - - @@ copy all -1: - @@ Write register/value pair starting at [r1] to register base r0 - ldr r3, [r1], #4 - ldr r4, [r1], #4 - str r4, [r0,r3] - cmp r1, r2 - blt 1b -.endm - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE @ sdram load addr from config.mk -_PHYS_FLASH: - .word PHYS_FLASH_1 @ real flash address (without mirroring) -_CAS_LATENCY: - .word 0x00022000 @ for CAS2 latency - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -.globl lowlevel_init -lowlevel_init: - - /* U-Boot may be linked to RAM at 0x780000. But this code will run in - flash from 0x0. But in order to enable RAM we have to disable the - mirror bit, therefore we have to jump to our real flash address - beginning at PHYS_FLASH_1 (CS4 Base). Therefore, - _run_at_real_flash_address may be 0x500003b0 while be linked to - 0x7803b0. So we must modify our linked addresses */ - - @@ branch to high memory address, away from 0x0 - ldr r5, _TEXT_BASE - ldr r6, _PHYS_FLASH - ldr r0, =_run_at_real_flash_address - sub r0, r0, r5 - add r0, r0, r6 - mov pc, r0 - nop @ for pipelining - -_run_at_real_flash_address: - @@ now we are running > PHYS_FLASH_1, safe to enable memory controller - - @@ Write Memory Configuration Registers - - ldr r0, _NS9750_MEM_MODULE_BASE - ldr r1, =_MEM_CONFIG_START - ldr r2, =_MEM_CONFIG_END - - write_register_block - - @@ Give SDRAM some time to settle - @@ @TODO. According to [2] it should be 2 AHB cycles. Check - - ldr r1, =0x50 -_sdram_settle: - subs r1, r1, #1 - bne _sdram_settle - -_enable_mappings: - @@ Enable SDRAM Mode - - ldr r1, =_MEM_MODE_START - ldr r2, =_MEM_MODE_END - - write_register_block - - ldr r3, _CAS_LATENCY @ perform one read from SDRAM - ldr r3, [r3] - - @@ Enable SDRAM and memory mappings - - ldr r1, =_MEM_ENABLE_START - ldr r2, =_MEM_ENABLE_END - - write_register_block - - @@ Activate AHB monitor - - ldr r0, =NS9750_SYS_MODULE_BASE - ldr r1, =_AHB_MONITOR_START - ldr r2, =_AHB_MONITOR_END - - write_register_block -_relocate_lr: - /* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to - PHYS_FLASH. */ - mov r1, ip - add r1, r1, r6 - mov ip, r1 - - mov r1, lr - add r1, r1, r6 - mov lr, r1 - - @@ back to arch calling code - mov pc, lr - - .ltorg - -_NS9750_MEM_MODULE_BASE: - .word NS9750_MEM_MODULE_BASE - -_MEM_CONFIG_START: - /* Table of 2 32bit entries. First word is register address offset - relative to NS9750_MEM_MODULE_BASE, second one is value. They are - written in order of appearance */ - - @@ Register values taken from [2] - .word NS9750_MEM_CTRL - .word NS9750_MEM_CTRL_E - - .word NS9750_MEM_DYN_REFRESH - .word (0x6 & NS9750_MEM_DYN_REFRESH_MA) - - .word NS9750_MEM_DYN_READ_CFG - .word (0x1 & NS9750_MEM_DYN_READ_CFG_MA) - - .word NS9750_MEM_DYN_TRP - .word (0x1 & NS9750_MEM_DYN_TRP_MA) - - .word NS9750_MEM_DYN_TRAS - .word (0x4 & NS9750_MEM_DYN_TRAS_MA) - - .word NS9750_MEM_DYN_TAPR - .word (0x1 & NS9750_MEM_DYN_TRAS_MA) - - .word NS9750_MEM_DYN_TDAL - .word (0x5 & NS9750_MEM_DYN_TDAL_MA) - - .word NS9750_MEM_DYN_TWR - .word (0x1 & NS9750_MEM_DYN_TWR_MA) - - .word NS9750_MEM_DYN_TRC - .word (0x6 & NS9750_MEM_DYN_TRC_MA) - - .word NS9750_MEM_DYN_TRFC - .word (0x6 & NS9750_MEM_DYN_TRFC_MA) - - .word NS9750_MEM_DYN_TRRD - .word (0x1 & NS9750_MEM_DYN_TRRD_MA) - - .word NS9750_MEM_DYN_TMRD - .word (0x1 & NS9750_MEM_DYN_TMRD_MA) - - @@ CS 4 - .word NS9750_MEM_DYN_CFG(0) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(0) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - @@ CS 5 - .word NS9750_MEM_DYN_CFG(1) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(1) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - @@ CS 6 - .word NS9750_MEM_DYN_CFG(2) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(2) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - @@ CS 7 - .word NS9750_MEM_DYN_CFG(3) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(3) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - .word NS9750_MEM_DYN_CTRL - .word (NS9750_MEM_DYN_CTRL_I_PALL | \ - NS9750_MEM_DYN_CTRL_SR | \ - NS9750_MEM_DYN_CTRL_CE ) - - .word NS9750_MEM_DYN_REFRESH - .word (0x1 & NS9750_MEM_DYN_REFRESH_MA) - @@ No further register settings after refresh -_MEM_CONFIG_END: - -_MEM_MODE_START: - .word NS9750_MEM_DYN_REFRESH - .word (0x30 & NS9750_MEM_DYN_REFRESH_MA) - - .word NS9750_MEM_DYN_CTRL - .word (NS9750_MEM_DYN_CTRL_I_MODE | \ - NS9750_MEM_DYN_CTRL_SR | \ - NS9750_MEM_DYN_CTRL_CE ) -_MEM_MODE_END: - -_MEM_ENABLE_START: - .word NS9750_MEM_DYN_CTRL - .word (NS9750_MEM_DYN_CTRL_I_NORMAL | \ - NS9750_MEM_DYN_CTRL_SR | \ - NS9750_MEM_DYN_CTRL_CE ) - - @@ CS 4 - .word NS9750_MEM_DYN_CFG(0) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - @@ CS 5 - .word NS9750_MEM_DYN_CFG(1) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - @@ CS 6 - .word NS9750_MEM_DYN_CFG(2) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - @@ CS 7 - .word NS9750_MEM_DYN_CFG(3) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) -_MEM_ENABLE_END: - -_AHB_MONITOR_START: - .word NS9750_SYS_AHB_TIMEOUT - .word 0x01000100 @ @TODO not calculated yet - - .word NS9750_SYS_AHB_MON - .word (NS9750_SYS_AHB_MON_BMTC_GEN_IRQ | \ - NS9750_SYS_AHB_MON_BATC_GEN_IRQ) -_AHB_MONITOR_END: - -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c deleted file mode 100644 index fc46244c74..0000000000 --- a/board/ns9750dev/ns9750dev.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * Markus Pietrek <mpietrek@fsforth.de> - * derived from omap1610innovator.c - * @References: [1] NS9750 Hardware Reference/December 2003 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#if defined(CONFIG_NS9750DEV) -# include <./configs/ns9750dev.h> -# include <./ns9750_bbus.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -void flash__init( void ); -void ether__init( void ); - -static inline void delay( unsigned long loops ) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - - -/*********************************************************************** - * @Function: board_init - * @Return: 0 - * @Descr: Enables BBUS modules and other devices - ***********************************************************************/ - -int board_init( void ) -{ - /* Active BBUS modules */ - *get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0; - -#warning Please register your machine at http://www.arm.linux.org.uk/developer/machines/?action=new - /* arch number of OMAP 1510-Board */ - /* to be changed for OMAP 1610 Board */ - gd->bd->bi_arch_number = 234; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - - -/* this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable(); - - flash__init(); - ether__init(); - return 0; -} - - -int misc_init_r (void) -{ - /* currently empty */ - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -void flash__init (void) -{ -} -/************************************************************* - Routine:ether__init - Description: take the Ethernet controller out of reset and wait - for the EEPROM load to complete. -*************************************************************/ -void ether__init (void) -{ -} - -/****************************** - Routine: - Description: -******************************/ -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - -#if CONFIG_NR_DRAM_BANKS > 1 - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; -#endif - return 0; -} diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c index df4cb6b728..3544b41cd0 100644 --- a/board/nvidia/cardhu/cardhu.c +++ b/board/nvidia/cardhu/cardhu.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2012 + * (C) Copyright 2010-2013 * NVIDIA Corporation <www.nvidia.com> * * See file CREDITS for list of people who contributed to this @@ -23,7 +23,12 @@ #include <common.h> #include <asm/arch/pinmux.h> +#include <asm/arch/gp_padctrl.h> #include "pinmux-config-cardhu.h" +#include <i2c.h> + +#define PMU_I2C_ADDRESS 0x2D +#define MAX_I2C_RETRY 3 /* * Routine: pinmux_init @@ -36,4 +41,54 @@ void pinmux_init(void) pinmux_config_table(unused_pins_lowpower, ARRAY_SIZE(unused_pins_lowpower)); + + /* Initialize any non-default pad configs (APB_MISC_GP regs) */ + padgrp_config_table(cardhu_padctrl, ARRAY_SIZE(cardhu_padctrl)); +} + +#if defined(CONFIG_TEGRA_MMC) +/* + * Do I2C/PMU writes to bring up SD card bus power + * + */ +void board_sdmmc_voltage_init(void) +{ + uchar reg, data_buffer[1]; + int i; + + i2c_set_bus_num(0); /* PMU is on bus 0 */ + + /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */ + data_buffer[0] = 0x65; + reg = 0x32; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { + if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) + udelay(100); + } + + /* TPS659110: GPIO7_REG = PDEN, output a 1 to EN_3V3_SYS */ + data_buffer[0] = 0x09; + reg = 0x67; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { + if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) + udelay(100); + } +} + +/* + * Routine: pin_mux_mmc + * Description: setup the MMC muxes, power rails, etc. + */ +void pin_mux_mmc(void) +{ + /* + * NOTE: We don't do mmc-specific pin muxes here. + * They were done globally in pinmux_init(). + */ + + /* Bring up the SDIO1 power rail */ + board_sdmmc_voltage_init(); } +#endif /* MMC */ diff --git a/board/nvidia/cardhu/cardhu.c.mmc b/board/nvidia/cardhu/cardhu.c.mmc deleted file mode 100644 index 9e83b6fc00..0000000000 --- a/board/nvidia/cardhu/cardhu.c.mmc +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2010-2012 - * NVIDIA Corporation <www.nvidia.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/pinmux.h> -#include "pinmux-config-cardhu.h" - -#include <asm/arch/clock.h> -#include <asm/arch/gp_padctrl.h> -#include <asm/arch/pmu.h> -#include <asm/arch/sdmmc.h> -#include <asm/arch-tegra/mmc.h> -#include <asm/arch-tegra/tegra_mmc.h> -#include <mmc.h> -#include <i2c.h> - -/* - * Routine: pinmux_init - * Description: Do individual peripheral pinmux configs - */ -void pinmux_init(void) -{ - pinmux_config_table(tegra3_pinmux_common, - ARRAY_SIZE(tegra3_pinmux_common)); - - pinmux_config_table(unused_pins_lowpower, - ARRAY_SIZE(unused_pins_lowpower)); -} - -#if defined(CONFIG_MMC) -/* - * Routine: pin_mux_mmc - * Description: setup the pin muxes/tristate values for the SDMMC(s) - */ -static void pin_mux_mmc(void) -{ -} - -/* Do I2C/PMU writes to bring up SD card bus power */ -static void board_sdmmc_voltage_init(void) -{ - uchar reg, data_buffer[1]; - int i; - - i2c_set_bus_num(0); /* PMU is on bus 0 */ - - data_buffer[0] = 0x65; - reg = 0x32; - - for (i = 0; i < MAX_I2C_RETRY; ++i) { - if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) - udelay(100); - } - - data_buffer[0] = 0x09; - reg = 0x67; - - for (i = 0; i < MAX_I2C_RETRY; ++i) { - if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) - udelay(100); - } -} - -static void pad_init_mmc(struct tegra_mmc *reg) -{ - struct apb_misc_gp_ctlr *const gpc = - (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; - struct sdmmc_ctlr *const sdmmc = (struct sdmmc_ctlr *)reg; - u32 val, offset = (unsigned int)reg; - u32 padcfg, padmask; - - debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)sdmmc); - - /* Set the pad drive strength for SDMMC1 or 3 only */ - if (offset != TEGRA_SDMMC1_BASE && offset != TEGRA_SDMMC3_BASE) { - debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", - __func__); - return; - } - - /* Set pads as per T30 TRM, section 24.6.1.2 */ - padcfg = (GP_SDIOCFG_DRVUP_SLWF | GP_SDIOCFG_DRVDN_SLWR | \ - GP_SDIOCFG_DRVUP | GP_SDIOCFG_DRVDN); - padmask = 0x00000FFF; - if (offset == TEGRA_SDMMC1_BASE) { - val = readl(&gpc->sdio1cfg); - val &= padmask; - val |= padcfg; - writel(val, &gpc->sdio1cfg); - } else { /* SDMMC3 */ - val = readl(&gpc->sdio3cfg); - val &= padmask; - val |= padcfg; - writel(val, &gpc->sdio3cfg); - } - - val = readl(&sdmmc->sdmmc_sdmemcomp_pad_ctrl); - val &= 0xFFFFFFF0; - val |= MEMCOMP_PADCTRL_VREF; - writel(val, &sdmmc->sdmmc_sdmemcomp_pad_ctrl); - - val = readl(&sdmmc->sdmmc_auto_cal_config); - val &= 0xFFFF0000; - val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED; - writel(val, &sdmmc->sdmmc_auto_cal_config); -} - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Turn on SD-card bus power */ - board_sdmmc_voltage_init(); - - /* Set up the SDMMC pads as per the TRM */ - pad_init_mmc((struct tegra_mmc *)TEGRA_SDMMC1_BASE); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - /* init dev 0 (SDMMC4), ("HSMMC") with 8-bit bus */ - tegra_mmc_init(0, 8, -1, -1); - - /* init dev 1 (SDMMC0), ("SDIO") with 8-bit bus */ - tegra_mmc_init(1, 8, -1, -1); - - return 0; -} -#endif /* MMC */ diff --git a/board/nvidia/cardhu/pinmux-config-cardhu.h b/board/nvidia/cardhu/pinmux-config-cardhu.h index 8428bba783..51d2b9425c 100644 --- a/board/nvidia/cardhu/pinmux-config-cardhu.h +++ b/board/nvidia/cardhu/pinmux-config-cardhu.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -53,6 +53,18 @@ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ } +#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \ + { \ + .padgrp = PDRIVE_PINGROUP_##_padgrp, \ + .slwf = _slwf, \ + .slwr = _slwr, \ + .drvup = _drvup, \ + .drvdn = _drvdn, \ + .lpmd = PGRP_LPMD_##_lpmd, \ + .schmt = PGRP_SCHMT_##_schmt, \ + .hsm = PGRP_HSM_##_hsm, \ + } + static struct pingroup_config tegra3_pinmux_common[] = { /* SDMMC1 pinmux */ DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), @@ -326,4 +338,9 @@ static struct pingroup_config unused_pins_lowpower[] = { DEFAULT_PINMUX(GMI_DQS, NAND, NORMAL, TRISTATE, OUTPUT), }; -#endif /* _PINMUX_CONFIG_CARDHU_H_ */ +static struct padctrl_config cardhu_padctrl[] = { + /* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */ + DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \ + SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE), +}; +#endif /* _PINMUX_CONFIG_CARDHU_H_ */ diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index d1d8a29cba..7d9f361a8a 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -46,7 +46,11 @@ #include <asm/arch/emc.h> #endif #ifdef CONFIG_USB_EHCI_TEGRA -#include <asm/arch/usb.h> +#include <asm/arch-tegra/usb.h> +#endif +#ifdef CONFIG_TEGRA_MMC +#include <asm/arch-tegra/tegra_mmc.h> +#include <asm/arch-tegra/mmc.h> #endif #include <i2c.h> #include <spi.h> @@ -221,3 +225,53 @@ int board_late_init(void) #endif return 0; } + +#if defined(CONFIG_TEGRA_MMC) +void __pin_mux_mmc(void) +{ +} + +void pin_mux_mmc(void) __attribute__((weak, alias("__pin_mux_mmc"))); + +/* this is a weak define that we are overriding */ +int board_mmc_init(bd_t *bd) +{ + debug("%s called\n", __func__); + + /* Enable muxes, etc. for SDMMC controllers */ + pin_mux_mmc(); + + debug("%s: init MMC\n", __func__); + tegra_mmc_init(); + + return 0; +} + +void pad_init_mmc(struct mmc_host *host) +{ +#if defined(CONFIG_TEGRA30) + enum periph_id id = host->mmc_id; + u32 val; + + debug("%s: sdmmc address = %08x, id = %d\n", __func__, + (unsigned int)host->reg, id); + + /* Set the pad drive strength for SDMMC1 or 3 only */ + if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) { + debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", + __func__); + return; + } + + val = readl(&host->reg->sdmemcmppadctl); + val &= 0xFFFFFFF0; + val |= MEMCOMP_PADCTRL_VREF; + writel(val, &host->reg->sdmemcmppadctl); + + val = readl(&host->reg->autocalcfg); + val &= 0xFFFF0000; + val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED; + writel(val, &host->reg->autocalcfg); +#endif /* T30 */ +} +#endif /* MMC */ diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c index aca3c7d17b..2020a5f00d 100644 --- a/board/nvidia/dalmore/dalmore.c +++ b/board/nvidia/dalmore/dalmore.c @@ -24,6 +24,9 @@ */ void pinmux_init(void) { + pinmux_config_table(tegra114_pinmux_set_nontristate, + ARRAY_SIZE(tegra114_pinmux_set_nontristate)); + pinmux_config_table(tegra114_pinmux_common, ARRAY_SIZE(tegra114_pinmux_common)); diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h index 3dd47da32d..3ef6f4eaf6 100644 --- a/board/nvidia/dalmore/pinmux-config-dalmore.h +++ b/board/nvidia/dalmore/pinmux-config-dalmore.h @@ -17,7 +17,7 @@ #ifndef _PINMUX_CONFIG_DALMORE_H_ #define _PINMUX_CONFIG_DALMORE_H_ -#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \ +#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \ { \ .pingroup = PINGRP_##_pingroup, \ .func = PMUX_FUNC_##_mux, \ @@ -41,7 +41,19 @@ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ } -#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \ +#define DDC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _rcv_sel) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define VI_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \ { \ .pingroup = PINGRP_##_pingroup, \ .func = PMUX_FUNC_##_mux, \ @@ -50,200 +62,303 @@ .io = PMUX_PIN_##_io, \ .lock = PMUX_PIN_LOCK_##_lock, \ .od = PMUX_PIN_OD_DEFAULT, \ - .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ + .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ + } + +#define CEC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_##_od, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define USB_PINMUX CEC_PINMUX + +#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \ + { \ + .padgrp = PDRIVE_PINGROUP_##_padgrp, \ + .slwf = _slwf, \ + .slwr = _slwr, \ + .drvup = _drvup, \ + .drvdn = _drvdn, \ + .lpmd = PGRP_LPMD_##_lpmd, \ + .schmt = PGRP_SCHMT_##_schmt, \ + .hsm = PGRP_HSM_##_hsm, \ } static struct pingroup_config tegra114_pinmux_common[] = { + /* EXTPERIPH1 pinmux */ + DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, OUTPUT), + + /* I2S0 pinmux */ + DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT), + + /* I2S1 pinmux */ + DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT), + + /* I2S3 pinmux */ + DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT), + + /* CLDVFS pinmux */ + DEFAULT_PINMUX(DVFS_PWM, CLDVFS, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(DVFS_CLK, CLDVFS, NORMAL, NORMAL, OUTPUT), + + /* ULPI pinmux */ + DEFAULT_PINMUX(ULPI_CLK, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA0, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA1, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA2, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA3, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA4, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA5, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA6, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA7, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DIR, ULPI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(ULPI_NXT, ULPI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(ULPI_STP, ULPI, NORMAL, NORMAL, OUTPUT), + + /* I2C3 pinmux */ + I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* VI pinmux */ + VI_PINMUX(CAM_MCLK, VI_ALT3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + + /* VI_ALT1 pinmux */ + VI_PINMUX(GPIO_PBB0, VI_ALT3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + + /* VGP4 pinmux */ + VI_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + + /* I2C2 pinmux */ + I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* UARTD pinmux */ + DEFAULT_PINMUX(GMI_A16, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_A17, UARTD, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_A18, UARTD, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_A19, UARTD, NORMAL, NORMAL, OUTPUT), + + /* SPI4 pinmux */ + DEFAULT_PINMUX(GMI_AD5, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD6, SPI4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD7, SPI4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD12, RSVD1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_CS6_N, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_WR_N, SPI4, NORMAL, NORMAL, INPUT), + + /* PWM1 pinmux */ + DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT), + + /* SOC pinmux */ + DEFAULT_PINMUX(GMI_CS1_N, SOC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_OE_N, SOC, NORMAL, TRISTATE, INPUT), + + /* EXTPERIPH2 pinmux */ + DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, OUTPUT), + /* SDMMC1 pinmux */ - DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_WP_N, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT), /* SDMMC3 pinmux */ - DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, NORMAL, NORMAL, OUTPUT), - - DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, UP, TRISTATE, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, DOWN, NORMAL, INPUT), /* SDMMC4 pinmux */ - LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE), + DEFAULT_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT), + + /* BLINK pinmux */ + DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT), + + /* KBC pinmux */ + DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT), + + /*Audio Codec*/ + DEFAULT_PINMUX(DAP3_DIN, RSVD1, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(DAP3_SCLK, RSVD1, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GPIO_PV0, RSVD1, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(KB_ROW7, RSVD1, UP, NORMAL, INPUT), + + /* UARTA pinmux */ + DEFAULT_PINMUX(KB_ROW10, UARTA, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW9, UARTA, NORMAL, NORMAL, OUTPUT), + + /* I2CPWR pinmux (I2C5) */ + I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* SYSCLK pinmux */ + DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT), + + /* RTCK pinmux */ + DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, INPUT), + + /* CLK pinmux */ + DEFAULT_PINMUX(CLK_32K_IN, CLK, NORMAL, TRISTATE, INPUT), + + /* PWRON pinmux */ + DEFAULT_PINMUX(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT), + + /* CPU pinmux */ + DEFAULT_PINMUX(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT), + + /* PMI pinmux */ + DEFAULT_PINMUX(PWR_INT_N, PMI, NORMAL, TRISTATE, INPUT), + + /* RESET_OUT_N pinmux */ + DEFAULT_PINMUX(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT), + + /* EXTPERIPH3 pinmux */ + DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT), /* I2C1 pinmux */ - I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), - /* I2C2 pinmux */ - I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + /* UARTB pinmux */ + DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT), - /* I2C3 pinmux */ - I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + /* IRDA pinmux */ + DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT), + + /* UARTC pinmux */ + DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT), + + /* OWR pinmux */ + DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT), + + /* CEC pinmux */ + CEC_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), /* I2C4 pinmux */ - I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - - /* Power I2C pinmux */ - I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - - DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(ULPI_DATA1, UARTA, UP, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA3, UARTA, NORMAL, NORMAL, INPUT), - - DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(ULPI_DIR, UARTD, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PU4, PWM1, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GPIO_PU5, PWM2, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(CLK3_REQ, DEV3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_WP_N, GMI, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_CS2_N, RSVD1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GMI_AD10, NAND, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GMI_A16, UARTD, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GMI_A17, UARTD, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_A18, UARTD, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_A19, UARTD, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(CAM_MCLK, VI_ALT2, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB3, VGP3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB5, VGP5, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB6, VGP6, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB7, I2S4, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PCC2, I2S4, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT), - - /* KBC keys */ - DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PV0, RSVD1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PV1, RSVD1, UP, NORMAL, INPUT), - - DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK1_REQ, DAP, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT), - - DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_CS1_N, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_CS2_N, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT), - - /* GPIOs */ - /* SDMMC1 CD gpio */ - DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT), - - /* Touch RESET */ - DEFAULT_PINMUX(GMI_AD14, NAND, NORMAL, NORMAL, OUTPUT), - - /* Power rails GPIO */ - DEFAULT_PINMUX(SPI2_SCK, GMI, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), + DDC_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH), + DDC_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH), + + /* USB pinmux */ + USB_PINMUX(USB_VBUS_EN0, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE), + + /* nct */ + DEFAULT_PINMUX(GPIO_X6_AUD, SPI6, UP, TRISTATE, INPUT), }; static struct pingroup_config unused_pins_lowpower[] = { - DEFAULT_PINMUX(GMI_CS0_N, NAND, UP, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_CS3_N, NAND, UP, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_CS4_N, NAND, UP, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(CLK1_REQ, RSVD3, DOWN, TRISTATE, OUTPUT), + DEFAULT_PINMUX(USB_VBUS_EN1, RSVD3, DOWN, TRISTATE, OUTPUT), }; -#endif /* _PINMUX_CONFIG_DALMORE_H_ */ +/* Initially setting all used GPIO's to non-TRISTATE */ +static struct pingroup_config tegra114_pinmux_set_nontristate[] = { + DEFAULT_PINMUX(GPIO_X4_AUD, RSVD1, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_X5_AUD, RSVD1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X6_AUD, RSVD3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X7_AUD, RSVD1, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_W2_AUD, RSVD1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_W3_AUD, SPI6, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X1_AUD, RSVD3, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X3_AUD, RSVD3, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(DAP3_FS, I2S2, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP3_DIN, I2S2, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP3_DOUT, I2S2, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP3_SCLK, I2S2, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PV0, RSVD3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PV1, RSVD1, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(GPIO_PBB3, RSVD3, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PBB5, RSVD3, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PBB6, RSVD3, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PBB7, RSVD3, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PCC1, RSVD3, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PCC2, RSVD3, DOWN, NORMAL, INPUT), + + DEFAULT_PINMUX(GMI_AD0, GMI, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD1, GMI, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD10, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD11, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD12, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD13, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD2, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD3, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD8, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_ADV_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CLK, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_CS0_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CS2_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CS3_N, GMI, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_CS4_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CS7_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_DQS, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_IORDY, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_WP_N, GMI, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(SDMMC1_WP_N, SPI4, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(CLK2_REQ, RSVD3, NORMAL, NORMAL, OUTPUT), + + DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_COL4, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_ROW3, KBC, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW4, KBC, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW6, KBC, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(CLK3_REQ, RSVD3, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU4, RSVD3, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU5, RSVD3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU6, RSVD3, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(HDMI_INT, RSVD1, DOWN, NORMAL, INPUT), + + DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(SPDIF_IN, USB, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT), +}; +#endif /* PINMUX_CONFIG_COMMON_H */ diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts index 731557798e..30cf1fb730 100644 --- a/board/nvidia/dts/tegra114-dalmore.dts +++ b/board/nvidia/dts/tegra114-dalmore.dts @@ -1,13 +1,46 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra114.dtsi" / { model = "NVIDIA Dalmore"; compatible = "nvidia,dalmore", "nvidia,tegra114"; + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + }; + memory { device_type = "memory"; reg = <0x80000000 0x80000000>; }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; }; diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index aeda3a1ffb..7934e4a897 100644 --- a/board/nvidia/dts/tegra20-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Harmony evaluation board"; @@ -9,6 +9,8 @@ aliases { usb0 = "/usb@c5008000"; usb1 = "/usb@c5004000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000200"; }; memory { @@ -52,4 +54,20 @@ usb@c5004000 { nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; + + sdhci@c8000200 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <8>; + }; }; diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts index 527a29689d..c0e2e1e5fd 100644 --- a/board/nvidia/dts/tegra20-seaboard.dts +++ b/board/nvidia/dts/tegra20-seaboard.dts @@ -1,7 +1,6 @@ /dts-v1/; -/memreserve/ 0x1c000000 0x04000000; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "NVIDIA Seaboard"; @@ -12,14 +11,15 @@ }; aliases { - /* This defines the order of our USB ports */ + /* This defines the order of our ports */ usb0 = "/usb@c5008000"; usb1 = "/usb@c5000000"; - i2c0 = "/i2c@7000d000"; i2c1 = "/i2c@7000c000"; i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000400"; }; memory { @@ -156,13 +156,16 @@ }; sdhci@c8000400 { - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; }; sdhci@c8000600 { - support-8bit; + status = "okay"; + bus-width = <8>; }; lcd_panel: panel { diff --git a/board/nvidia/dts/tegra20-ventana.dts b/board/nvidia/dts/tegra20-ventana.dts index 3e5e39da63..e1a3d1ec91 100644 --- a/board/nvidia/dts/tegra20-ventana.dts +++ b/board/nvidia/dts/tegra20-ventana.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; @@ -8,6 +8,8 @@ aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000400"; }; memory { @@ -41,4 +43,17 @@ usb@c5004000 { status = "disabled"; }; + + sdhci@c8000400 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; }; diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts index 4579557d6d..eb92264f9d 100644 --- a/board/nvidia/dts/tegra20-whistler.dts +++ b/board/nvidia/dts/tegra20-whistler.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Whistler evaluation board"; @@ -9,6 +9,8 @@ aliases { i2c0 = "/i2c@7000d000"; usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000400"; }; memory { @@ -57,4 +59,15 @@ usb@c5004000 { status = "disabled"; }; + + sdhci@c8000400 { + status = "okay"; + wp-gpios = <&gpio 173 0>; /* gpio PV5 */ + bus-width = <8>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; }; diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts index f9f80c5218..4d22b48ee9 100644 --- a/board/nvidia/dts/tegra30-cardhu.dts +++ b/board/nvidia/dts/tegra30-cardhu.dts @@ -1,7 +1,6 @@ /dts-v1/; -/memreserve/ 0x1c000000 0x04000000; -/include/ ARCH_CPU_DTS +#include "tegra30.dtsi" / { model = "NVIDIA Cardhu"; @@ -13,6 +12,8 @@ i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000c700"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000000"; }; memory { @@ -21,22 +22,27 @@ }; i2c@7000c000 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c400 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c700 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <100000>; }; @@ -44,4 +50,17 @@ status = "okay"; spi-max-frequency = <25000000>; }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; }; diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index 93430edd3b..312244139c 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -27,19 +27,14 @@ #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> #include <asm/arch/tegra.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif - #ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT); funcmux_select(PERIPH_ID_SDMMC2, FUNCMUX_SDMMC2_DTA_DTD_8BIT); @@ -54,25 +49,6 @@ static void pin_mux_mmc(void) /* For CD GPIO PI5 */ pinmux_tristate_disable(PINGRP_ATC); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - debug("board_mmc_init: init SD slot J26\n"); - /* init dev 0, SD slot J26, with 8-bit bus */ - tegra_mmc_init(0, 8, GPIO_PI6, GPIO_PH2); - - debug("board_mmc_init: init SD slot J5\n"); - /* init dev 2, SD slot J5, with 4-bit bus */ - tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5); - - return 0; -} #endif void pin_mux_usb(void) diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index 3e33da0afc..e581fddf43 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -28,11 +28,7 @@ #include <asm/arch/funcmux.h> #include <asm/arch/gpio.h> #include <asm/arch/pinmux.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif /* TODO: Remove this code when the SPI switch is working */ #if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) @@ -51,7 +47,7 @@ void gpio_early_init_uart(void) * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT); funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT); @@ -61,25 +57,6 @@ static void pin_mux_mmc(void) /* For CD GPIO PI5 */ pinmux_tristate_disable(PINGRP_ATC); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - debug("board_mmc_init: init eMMC\n"); - /* init dev 0, eMMC chip, with 8-bit bus */ - tegra_mmc_init(0, 8, -1, -1); - - debug("board_mmc_init: init SD slot\n"); - /* init dev 1, SD slot, with 4-bit bus */ - tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); - - return 0; -} #endif void pin_mux_usb(void) diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c index 592cd6b496..f18aa277b3 100644 --- a/board/nvidia/whistler/whistler.c +++ b/board/nvidia/whistler/whistler.c @@ -27,32 +27,19 @@ #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> #include <i2c.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif - +#ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) -{ - funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT); - funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT); -} - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) +void pin_mux_mmc(void) { uchar val; int ret; - debug("board_mmc_init called\n"); - /* Turn on MAX8907B LDO12 to 2.8V for J40 power */ ret = i2c_set_bus_num(0); if (ret) @@ -70,17 +57,10 @@ int board_mmc_init(bd_t *bd) if (ret) printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret); - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - /* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */ - tegra_mmc_init(0, 8, -1, -1); - - /* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */ - tegra_mmc_init(1, 8, -1, -1); - - return 0; + funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT); + funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT); } +#endif /* this is a weak define that we are overriding */ void pin_mux_usb(void) diff --git a/board/nx823/u-boot.lds b/board/nx823/u-boot.lds index 3c1c05aa95..a1481c8699 100644 --- a/board/nx823/u-boot.lds +++ b/board/nx823/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/nx823/u-boot.lds.debug b/board/nx823/u-boot.lds.debug index 92796e6744..614bbb20b6 100644 --- a/board/nx823/u-boot.lds.debug +++ b/board/nx823/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index 6a6053b385..9ed7718152 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -23,11 +23,15 @@ */ #include <common.h> +#include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/iomux-mx23.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#ifdef CONFIG_STATUS_LED +#include <status_led.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -42,6 +46,11 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); +#ifdef CONFIG_CMD_USB + /* Enable LAN9512 */ + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); +#endif + return 0; } @@ -67,5 +76,9 @@ int board_init(void) /* Adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set(STATUS_LED_BOOT, STATUS_LED_STATE); +#endif + return 0; } diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c index 7def8bc3e9..a96c293c0a 100644 --- a/board/olimex/mx23_olinuxino/spl_boot.c +++ b/board/olimex/mx23_olinuxino/spl_boot.c @@ -84,6 +84,10 @@ const iomux_cfg_t iomux_setup[] = { MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, + /* Green LED */ + MX23_PAD_SSP1_DETECT__GPIO_2_1 | + (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL), + /* MMC 0 */ MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP, MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP, @@ -91,6 +95,10 @@ const iomux_cfg_t iomux_setup[] = { MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP, MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP, MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP, + + /* Ethernet */ + MX23_PAD_GPMI_ALE__GPIO_0_17 | + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), }; void board_init_ll(void) diff --git a/board/openrisc/openrisc-generic/u-boot.lds b/board/openrisc/openrisc-generic/u-boot.lds index 4cffacbd46..9024f30b30 100644 --- a/board/openrisc/openrisc-generic/u-boot.lds +++ b/board/openrisc/openrisc-generic/u-boot.lds @@ -29,7 +29,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .rodata : { diff --git a/board/overo/overo.c b/board/overo/overo.c index fdf46a2aae..8690450fa8 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -392,7 +392,6 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c index 3a62e9d633..9ff5dd7664 100644 --- a/board/pandora/pandora.c +++ b/board/pandora/pandora.c @@ -139,7 +139,6 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/phytec/pcm051/mux.c b/board/phytec/pcm051/mux.c index 4d3a1d5f88..6e9c3d257c 100644 --- a/board/phytec/pcm051/mux.c +++ b/board/phytec/pcm051/mux.c @@ -35,7 +35,6 @@ static struct module_pin_mux mmc0_pin_mux[] = { {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ {-1}, }; diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/quantum/u-boot.lds +++ b/board/quantum/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/r360mpi/u-boot.lds b/board/r360mpi/u-boot.lds index 404eda03f6..ef3a17fbbe 100644 --- a/board/r360mpi/u-boot.lds +++ b/board/r360mpi/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds index bb3b9deb33..b35440958c 100644 --- a/board/rbc823/u-boot.lds +++ b/board/rbc823/u-boot.lds @@ -80,7 +80,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; diff --git a/board/renesas/sh7752evb/u-boot.lds b/board/renesas/sh7752evb/u-boot.lds index d5683126b8..276f525eb7 100644 --- a/board/renesas/sh7752evb/u-boot.lds +++ b/board/renesas/sh7752evb/u-boot.lds @@ -78,7 +78,7 @@ SECTIONS PROVIDE (_egot = .); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); diff --git a/board/renesas/sh7757lcr/u-boot.lds b/board/renesas/sh7757lcr/u-boot.lds index 49d65006b1..58824271cb 100644 --- a/board/renesas/sh7757lcr/u-boot.lds +++ b/board/renesas/sh7757lcr/u-boot.lds @@ -79,7 +79,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds index ec8cdddadc..240b9363c8 100644 --- a/board/rsdproto/u-boot.lds +++ b/board/rsdproto/u-boot.lds @@ -100,7 +100,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/samsung/smdk5250/smdk5250-uboot-spl.lds b/board/samsung/smdk5250/smdk5250-uboot-spl.lds index 48ad60cea3..4c8baaa9db 100644 --- a/board/samsung/smdk5250/smdk5250-uboot-spl.lds +++ b/board/samsung/smdk5250/smdk5250-uboot-spl.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } >.sram . = ALIGN(4); diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds index 3bf2ae1dcb..64c650d2e9 100644 --- a/board/samsung/smdk6400/u-boot-nand.lds +++ b/board/samsung/smdk6400/u-boot-nand.lds @@ -50,7 +50,7 @@ SECTIONS . = align(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = align(4); diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug index 7a0757f146..6b99f135ad 100644 --- a/board/sandburst/karef/u-boot.lds.debug +++ b/board/sandburst/karef/u-boot.lds.debug @@ -118,7 +118,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug index 07bd6fe19f..0b4192e867 100644 --- a/board/sandburst/metrobox/u-boot.lds.debug +++ b/board/sandburst/metrobox/u-boot.lds.debug @@ -118,7 +118,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/sandpoint/u-boot.lds b/board/sandpoint/u-boot.lds index 65c1dbd88e..95e13c46df 100644 --- a/board/sandpoint/u-boot.lds +++ b/board/sandpoint/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds index ce3026f0ad..66c5fba210 100644 --- a/board/sixnet/u-boot.lds +++ b/board/sixnet/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/snmc/qs850/u-boot.lds b/board/snmc/qs850/u-boot.lds index 749980fa0f..285e8971ff 100644 --- a/board/snmc/qs850/u-boot.lds +++ b/board/snmc/qs850/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/snmc/qs860t/u-boot.lds b/board/snmc/qs860t/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/snmc/qs860t/u-boot.lds +++ b/board/snmc/qs860t/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds index a507d73aeb..3334a44f61 100644 --- a/board/spc1920/u-boot.lds +++ b/board/spc1920/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds index 905c91d848..58f2565f7f 100644 --- a/board/spd8xx/u-boot.lds +++ b/board/spd8xx/u-boot.lds @@ -78,7 +78,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug index 4155b604fb..063f2cc92f 100644 --- a/board/spd8xx/u-boot.lds.debug +++ b/board/spd8xx/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/stx/stxxtc/u-boot.lds b/board/stx/stxxtc/u-boot.lds index e63a8c9fab..03891e937f 100644 --- a/board/stx/stxxtc/u-boot.lds +++ b/board/stx/stxxtc/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/stx/stxxtc/u-boot.lds.debug b/board/stx/stxxtc/u-boot.lds.debug index 900da64859..e1fe052c37 100644 --- a/board/stx/stxxtc/u-boot.lds.debug +++ b/board/stx/stxxtc/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds index 5d3d8f2019..99b8bfa5bf 100644 --- a/board/svm_sc8xx/u-boot.lds +++ b/board/svm_sc8xx/u-boot.lds @@ -86,7 +86,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index fa0ace019a..a28c7043f9 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -147,7 +147,7 @@ int board_eth_init(bd_t *bis) !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index c516c75a00..d57678668b 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -81,6 +81,7 @@ static struct panel_config lcd_cfg[] = { .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ .panel_color = 0, + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }, { .timing_h = PANEL_TIMING_H(20, 192, 4), @@ -91,6 +92,7 @@ static struct panel_config lcd_cfg[] = { .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ .panel_color = 0, + .gfx_format = GFXFORMAT_RGB24_UNPACKED, } }; #endif @@ -304,7 +306,7 @@ int board_eth_init(bd_t *bis) !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 48e68967e5..f4b972b3e9 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -73,7 +73,7 @@ static inline int board_is_idk(void) return !strncmp(header.config, "SKU#02", 6); } -static int board_is_gp_evm(void) +static int __maybe_unused board_is_gp_evm(void) { return !strncmp("A33515BB", header.name, 8); } @@ -389,7 +389,8 @@ int board_late_init(void) } #endif -#ifdef CONFIG_DRIVER_TI_CPSW +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -434,26 +435,26 @@ static struct cpsw_platform_data cpsw_data = { int board_eth_init(bd_t *bis) { int rv, n = 0; -#ifdef CONFIG_DRIVER_TI_CPSW uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - printf("<ethaddr> not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + if (!getenv("ethaddr")) { + printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ether_addr(mac_addr)) eth_setenv_enetaddr("ethaddr", mac_addr); - else - goto try_usbether; } if (board_is_bone() || board_is_bone_lt() || board_is_idk()) { @@ -494,8 +495,11 @@ int board_eth_init(bd_t *bis) AR8051_RGMII_TX_CLK_DLY); } #endif -try_usbether: -#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_USB_ETHER) && \ + (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("usbnet_devaddr", mac_addr); + rv = usb_eth_initialize(bis); if (rv < 0) printf("Error %d registering USB_ETHER\n", rv); diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c index 888398deac..0b94245e02 100644 --- a/board/ti/am3517crane/am3517crane.c +++ b/board/ti/am3517crane/am3517crane.c @@ -78,7 +78,6 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index b829a792b2..3d9b6dd8fd 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -72,6 +72,7 @@ #define BBTOYS_LCD 0x03000B00 #define BCT_BRETTL3 0x01000F00 #define BCT_BRETTL4 0x02000F00 +#define LSR_COM6L_ADPT 0x01001300 #define BEAGLE_NO_EEPROM 0xffffffff DECLARE_GLOBAL_DATA_PTR; @@ -227,6 +228,14 @@ static unsigned int get_expansion_id(void) i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, sizeof(expansion_config)); + /* retry reading configuration data with 16bit addressing */ + if ((expansion_config.device_vendor == 0xFFFFFF00) || + (expansion_config.device_vendor == 0xFFFFFFFF)) { + printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n"); + i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config, + sizeof(expansion_config)); + } + i2c_set_bus_num(TWL4030_I2C_BUS); return expansion_config.device_vendor; @@ -454,6 +463,11 @@ int misc_init_r(void) case BCT_BRETTL4: printf("Recognized bct electronic GmbH brettl4 board\n"); break; + case LSR_COM6L_ADPT: + printf("Recognized LSR COM6L Adapter Board\n"); + MUX_BBTOYS_WIFI() + setenv("buddy", "lsr-com6l-adpt"); + break; case BEAGLE_NO_EEPROM: printf("No EEPROM on expansion board\n"); setenv("buddy", "none"); @@ -518,8 +532,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index c0a94a92c1..6d71bbc79d 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -544,7 +544,8 @@ static const struct panel_config dvid_cfg = { .panel_type = 0x01, /* TFT */ .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ - .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */ + .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */ + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }; static const struct panel_config dvid_cfg_xm = { @@ -556,6 +557,7 @@ static const struct panel_config dvid_cfg_xm = { .panel_type = 0x01, /* TFT */ .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ - .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */ + .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */ + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }; #endif diff --git a/board/ns9750dev/Makefile b/board/ti/dra7xx/Makefile index 0d082c5696..db6da5ba21 100644 --- a/board/ns9750dev/Makefile +++ b/board/ti/dra7xx/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# (C) Copyright 2013 +# Texas Instruments, <www.ti.com> # # See file CREDITS for list of people who contributed to this # project. @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -25,15 +25,19 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := ns9750dev.o flash.o led.o -SOBJS := lowlevel_init.o +COBJS := evm.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c new file mode 100644 index 0000000000..7bbb5492fe --- /dev/null +++ b/board/ti/dra7xx/evm.c @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated, <www.ti.com> + * + * Lokesh Vutla <lokeshvutla@ti.com> + * + * Based on previous work by: + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <twl6035.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> + +#include "mux_data.h" + +#ifdef CONFIG_USB_EHCI +#include <usb.h> +#include <asm/arch/ehci.h> +#include <asm/ehci-omap.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: DRA7xx\n" +}; + +/** + * @brief board_init + * + * @return 0 + */ +int board_init(void) +{ + gpmc_init(); + gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return 0; +} + +/** + * @brief misc_init_r - Configure EVM board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ + return 0; +} + +static void do_set_mux32(u32 base, + struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *)array; + + for (i = 0; i < size; i++, pad++) + writel(pad->val, base + pad->offset); +} + +void set_muxconf_regs_essential(void) +{ + do_set_mux32((*ctrl)->control_padconf_core_base, + core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); +} + +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); + return 0; +} +#endif diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h new file mode 100644 index 0000000000..04c95fd376 --- /dev/null +++ b/board/ti/dra7xx/mux_data.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * Nishant Kamat <nskamat@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MUX_DATA_DRA7XX_H_ +#define _MUX_DATA_DRA7XX_H_ + +#include <asm/arch/mux_dra7xx.h> + +const struct pad_conf_entry core_padconf_array_essential[] = { + {MMC1_CLK, (PTU | IEN | M0)}, /* MMC1_CLK */ + {MMC1_CMD, (PTU | IEN | M0)}, /* MMC1_CMD */ + {MMC1_DAT0, (PTU | IEN | M0)}, /* MMC1_DAT0 */ + {MMC1_DAT1, (PTU | IEN | M0)}, /* MMC1_DAT1 */ + {MMC1_DAT2, (PTU | IEN | M0)}, /* MMC1_DAT2 */ + {MMC1_DAT3, (PTU | IEN | M0)}, /* MMC1_DAT3 */ + {MMC1_SDCD, (PTU | IEN | M0)}, /* MMC1_SDCD */ + {MMC1_SDWP, (PTU | IEN | M0)}, /* MMC1_SDWP */ + {UART1_RXD, (PTU | IEN | M0)}, /* UART1_RXD */ + {UART1_TXD, (M0)}, /* UART1_TXD */ + {UART1_CTSN, (PTU | IEN | M0)}, /* UART1_CTSN */ + {UART1_RTSN, (M0)}, /* UART1_RTSN */ + {I2C1_SDA, (PTU | IEN | M0)}, /* I2C1_SDA */ + {I2C1_SCL, (PTU | IEN | M0)}, /* I2C1_SCL */ +}; +#endif /* _MUX_DATA_DRA7XX_H_ */ diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index 8a3aa0c5bf..3c2dcab68c 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -277,7 +277,6 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c index c8dfdf8142..55337c09d5 100644 --- a/board/ti/omap5_evm/evm.c +++ b/board/ti/omap5_evm/evm.c @@ -94,8 +94,8 @@ void set_muxconf_regs_non_essential(void) #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } #endif diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 4feef78efe..cab059863d 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -179,8 +179,7 @@ void set_muxconf_regs_non_essential(void) #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c index 9a1c012145..052efc589f 100644 --- a/board/ti/sdp3430/sdp.c +++ b/board/ti/sdp3430/sdp.c @@ -209,7 +209,6 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index 982c771a73..4c1a4f7e78 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -108,8 +108,8 @@ void set_muxconf_regs_non_essential(void) #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } #endif diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index b88d9783cb..ebff59e70b 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -136,8 +136,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c index e40a98609f..aa76f65fde 100644 --- a/board/toradex/colibri_t20_iris/colibri_t20_iris.c +++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c @@ -19,7 +19,6 @@ #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> #include <asm/arch-tegra/board.h> -#include <asm/arch-tegra/mmc.h> #include "../colibri_t20-common/colibri_t20-common.h" @@ -34,13 +33,13 @@ void pin_mux_usb(void) #endif #ifdef CONFIG_TEGRA_MMC -int board_mmc_init(bd_t *bd) +/* + * Routine: pin_mux_mmc + * Description: setup the pin muxes/tristate values for the SDMMC(s) + */ +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT); pinmux_tristate_disable(PINGRP_GMB); - - tegra_mmc_init(0, 4, -1, GPIO_PC7); - - return 0; } #endif diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts index c29b43a0ef..c0e54af886 100644 --- a/board/toradex/dts/tegra20-colibri_t20_iris.dts +++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "Toradex Colibri T20"; @@ -10,6 +10,7 @@ usb0 = "/usb@c5008000"; usb1 = "/usb@c5000000"; usb2 = "/usb@c5004000"; + sdhci0 = "/sdhci@c8000600"; }; usb@c5000000 { @@ -35,4 +36,10 @@ compatible = "nand-flash"; }; }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 23 1>; /* gpio PC7 */ + bus-width = <4>; + }; }; diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds index bcc618c851..fbf321da54 100644 --- a/board/tqc/tqm8xx/u-boot.lds +++ b/board/tqc/tqm8xx/u-boot.lds @@ -82,7 +82,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds index cdd73fae47..f25a01b3d5 100644 --- a/board/v37/u-boot.lds +++ b/board/v37/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index 5d66c13a4b..dc437d1f23 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -57,10 +57,6 @@ SECTIONS *(.data) } - .u_boot_list : { - #include <u-boot.lst> - } - . = ALIGN(4); .rel.dyn : { diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug index 2ce5a9a71c..18b7752054 100644 --- a/board/w7o/u-boot.lds.debug +++ b/board/w7o/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/xes/xpedite1000/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug index c4e5706543..c02581d982 100644 --- a/board/xes/xpedite1000/u-boot.lds.debug +++ b/board/xes/xpedite1000/u-boot.lds.debug @@ -114,7 +114,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/boards.cfg b/boards.cfg index 2b408f5cca..ee68fdda83 100644 --- a/boards.cfg +++ b/boards.cfg @@ -95,6 +95,7 @@ at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0 at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1 at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH +at91sam9g20ek_2mmc_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH @@ -233,11 +234,13 @@ integratorap_cm946es arm arm946es integrator armltd integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES ca9x4_ct_vxp arm armv7 vexpress armltd am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1 +am335x_evm_spiboot arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2 am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3 am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4 am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5 am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6 +am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT pcm051 arm armv7 pcm051 phytec am33xx pcm051 highbank arm armv7 highbank - highbank mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg @@ -254,6 +257,12 @@ mx6qsabreauto arm armv7 mx6qsabreauto freesca mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg eco5pk arm armv7 eco5pk 8dtech omap3 +nitrogen6dl arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 +nitrogen6dl2g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048 +nitrogen6q arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024 +nitrogen6q2g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048 +nitrogen6s arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512 +nitrogen6s1g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024 cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 @@ -262,6 +271,7 @@ igep0020 arm armv7 igep00x0 isee igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND +igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 @@ -282,6 +292,7 @@ nokia_rx51 arm armv7 rx51 nokia omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 omap5_evm arm armv7 omap5_evm ti omap5 +dra7xx_evm arm armv7 dra7xx ti omap5 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx origen arm armv7 origen samsung exynos @@ -301,6 +312,7 @@ snowball arm armv7 snowball st-e kzm9g arm armv7 kzm9g kmc rmobile armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile zynq arm armv7 zynq xilinx zynq +zynq_dcc arm armv7 zynq xilinx zynq zynq:ZYNQ_DCC socfpga_cyclone5 arm armv7 socfpga_cyclone5 altera socfpga actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB diff --git a/common/cmd_help.c b/common/cmd_help.c index f832a96971..d9bdc4d17b 100644 --- a/common/cmd_help.c +++ b/common/cmd_help.c @@ -41,7 +41,7 @@ U_BOOT_CMD( ); /* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ -ll_entry_declare(cmd_tbl_t, question_mark, cmd, cmd) = { +ll_entry_declare(cmd_tbl_t, question_mark, cmd) = { "?", CONFIG_SYS_MAXARGS, 1, do_help, "alias for 'help'", #ifdef CONFIG_SYS_LONGHELP diff --git a/common/cmd_led.c b/common/cmd_led.c index c725f95ac1..84f79fae00 100644 --- a/common/cmd_led.c +++ b/common/cmd_led.c @@ -110,13 +110,15 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (led_commands[i].on) led_commands[i].on(); else - __led_set(led_commands[i].mask, STATUS_LED_ON); + __led_set(led_commands[i].mask, + STATUS_LED_ON); break; case LED_OFF: if (led_commands[i].off) led_commands[i].off(); else - __led_set(led_commands[i].mask, STATUS_LED_OFF); + __led_set(led_commands[i].mask, + STATUS_LED_OFF); break; case LED_TOGGLE: if (led_commands[i].toggle) diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 7dacd5114c..8c53a10315 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -282,6 +282,13 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) mmc_init(mmc); + if ((state == MMC_WRITE || state == MMC_ERASE)) { + if (mmc_getwp(mmc) == 1) { + printf("Error: card is write protected!\n"); + return 1; + } + } + switch (state) { case MMC_READ: n = mmc->block_dev.block_read(curr_device, blk, diff --git a/common/cmd_sata.c b/common/cmd_sata.c index b401bd1024..8d57285d05 100644 --- a/common/cmd_sata.c +++ b/common/cmd_sata.c @@ -196,7 +196,7 @@ static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( sata, 5, 1, do_sata, "SATA sub system", - "sata init - init SATA sub system\n" + "init - init SATA sub system\n" "sata info - show available SATA devices\n" "sata device [dev] - show or set current device\n" "sata part [dev] - print partition table\n" diff --git a/common/lcd.c b/common/lcd.c index 66d4f94f9e..590bbb9301 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -33,6 +33,8 @@ #include <common.h> #include <command.h> #include <stdarg.h> +#include <search.h> +#include <env_callback.h> #include <linux/types.h> #include <stdio_dev.h> #if defined(CONFIG_POST) @@ -1034,6 +1036,18 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) } #endif +#ifdef CONFIG_SPLASH_SCREEN_PREPARE +static inline int splash_screen_prepare(void) +{ + return board_splash_screen_prepare(); +} +#else +static inline int splash_screen_prepare(void) +{ + return 0; +} +#endif + static void *lcd_logo(void) { #ifdef CONFIG_SPLASH_SCREEN @@ -1045,6 +1059,9 @@ static void *lcd_logo(void) int x = 0, y = 0; do_splash = 0; + if (splash_screen_prepare()) + return (void *)gd->fb_base; + addr = simple_strtoul (s, NULL, 16); #ifdef CONFIG_SPLASH_SCREEN_ALIGN s = getenv("splashpos"); @@ -1084,6 +1101,30 @@ static void *lcd_logo(void) #endif /* CONFIG_LCD_LOGO && !CONFIG_LCD_INFO_BELOW_LOGO */ } +#ifdef CONFIG_SPLASHIMAGE_GUARD +static int on_splashimage(const char *name, const char *value, enum env_op op, + int flags) +{ + ulong addr; + int aligned; + + if (op == env_op_delete) + return 0; + + addr = simple_strtoul(value, NULL, 16); + /* See README.displaying-bmps */ + aligned = (addr % 4 == 2); + if (!aligned) { + printf("Invalid splashimage value. Value must be 16 bit aligned, but not 32 bit aligned\n"); + return -1; + } + + return 0; +} + +U_BOOT_ENV_CALLBACK(splashimage, on_splashimage); +#endif + void lcd_position_cursor(unsigned col, unsigned row) { console_col = min(col, CONSOLE_COLS - 1); diff --git a/common/spl/Makefile b/common/spl/Makefile index 5698a2335a..da2afc11b3 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -18,6 +18,7 @@ COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o +COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o endif diff --git a/common/spl/spl.c b/common/spl/spl.c index ff9ba7b0a5..6715e0d203 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -197,6 +197,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2) spl_nand_load_image(); break; #endif +#ifdef CONFIG_SPL_ONENAND_SUPPORT + case BOOT_DEVICE_ONENAND: + spl_onenand_load_image(); + break; +#endif #ifdef CONFIG_SPL_NOR_SUPPORT case BOOT_DEVICE_NOR: spl_nor_load_image(); @@ -221,6 +226,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2) #endif break; #endif +#ifdef CONFIG_SPL_USBETH_SUPPORT + case BOOT_DEVICE_USBETH: + spl_net_load_image("usb_ether"); + break; +#endif default: debug("SPL: Un-supported Boot Device\n"); hang(); diff --git a/common/spl/spl_onenand.c b/common/spl/spl_onenand.c new file mode 100644 index 0000000000..4349303565 --- /dev/null +++ b/common/spl/spl_onenand.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2013 + * ISEE 2007 SL - Enric Balletbo i Serra <eballetbo@iseebcn.com> + * + * Based on common/spl/spl_nand.c + * Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <config.h> +#include <spl.h> +#include <asm/io.h> +#include <onenand_uboot.h> + +void spl_onenand_load_image(void) +{ + struct image_header *header; + + debug("spl: onenand\n"); + + /*use CONFIG_SYS_TEXT_BASE as temporary storage area */ + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); + /* Load u-boot */ + onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS, + CONFIG_SYS_ONENAND_PAGE_SIZE, (void *)header); + spl_parse_image_header(header); + onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS, + spl_image.size, (void *)spl_image.load_addr); +} @@ -23,8 +23,6 @@ ######################################################################### -include $(TOPDIR)/helper.mk - ifeq ($(CURDIR),$(SRCTREE)) dir := else diff --git a/disk/part.c b/disk/part.c index 58a45637aa..d73625c443 100644 --- a/disk/part.c +++ b/disk/part.c @@ -35,16 +35,6 @@ #define PRINTF(fmt,args...) #endif -/* Rather than repeat this expression each time, add a define for it */ -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) -#define HAVE_BLOCK_DEVICE -#endif - struct block_drvr { char *name; block_dev_desc_t* (*get_dev)(int dev); diff --git a/disk/part_amiga.c b/disk/part_amiga.c index dc7d46256d..0e6d82dbae 100644 --- a/disk/part_amiga.c +++ b/disk/part_amiga.c @@ -26,11 +26,7 @@ #include <ide.h> #include "part_amiga.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE #undef AMIGA_DEBUG diff --git a/disk/part_dos.c b/disk/part_dos.c index 3fe901ba1b..37087a6ac3 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -35,12 +35,7 @@ #include <ide.h> #include "part_dos.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE /* Convert char[4] in little endian format to the host format integer */ diff --git a/disk/part_efi.c b/disk/part_efi.c index 7665017330..b3fd0e954d 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -39,13 +39,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) - +#ifdef HAVE_BLOCK_DEVICE /** * efi_crc32() - EFI version of crc32 function * @buf: buffer to calculate crc32 of diff --git a/disk/part_iso.c b/disk/part_iso.c index 4401790af2..49639af269 100644 --- a/disk/part_iso.c +++ b/disk/part_iso.c @@ -25,12 +25,7 @@ #include <command.h> #include "part_iso.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE /* #define ISO_PART_DEBUG */ diff --git a/disk/part_mac.c b/disk/part_mac.c index cb443ac532..74dc12fe58 100644 --- a/disk/part_mac.c +++ b/disk/part_mac.c @@ -34,12 +34,7 @@ #include <ide.h> #include "part_mac.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE /* stdlib.h causes some compatibility problems; should fixe these! -- wd */ #ifndef __ldiv_t_defined diff --git a/doc/README.commands b/doc/README.commands index 923418b1a4..9eb367104f 100644 --- a/doc/README.commands +++ b/doc/README.commands @@ -15,24 +15,22 @@ help: Long description. This is a string **** Behind the scene ****** -The structure created is named with a special prefix (__u_boot_list_cmd_) -and placed by the linker in a special section. +The structure created is named with a special prefix and placed by +the linker in a special section using the linker lists mechanism +(see include/linker_lists.h) This makes it possible for the final link to extract all commands compiled into any object code and construct a static array so the -command can be found in an array starting at _u_boot_list_cmd__start. +command array can be iterated over using the linker lists macros. -To ensure that the linker does not discard these symbols when linking -full U-Boot we generate a list of all the commands we have built (based -on the sections mentioned above) and use that to force the linker to -first enter the symbol as undefined in the output object so that there -is then a need for the symbol to be kept (this is the UNDEF_SYM logic in -the Makefile). +The linker lists feature ensures that the linker does not discard +these symbols when linking full U-Boot even though they are not +referenced in the source code as such. If a new board is defined do not forget to define the command section by writing in u-boot.lds ($(TOPDIR)/board/boardname/u-boot.lds) these 3 lines: .u_boot_list : { - #include "u-boot.lst"; + KEEP(*(SORT(.u_boot_list*))); } diff --git a/doc/README.displaying-bmps b/doc/README.displaying-bmps new file mode 100644 index 0000000000..331154166d --- /dev/null +++ b/doc/README.displaying-bmps @@ -0,0 +1,27 @@ +If you are experiencing hangups/data-aborts when trying to display a BMP image, +the following might be relevant to your situation... + +Some architectures cannot handle unaligned memory accesses, and an attempt to +perform one will lead to a data abort. On such architectures it is necessary to +make sure all data is properly aligned, and in many situations simply choosing +a 32 bit aligned address is enough to ensure proper alignment. This is not +always the case when dealing with data that has an internal layout such as a +BMP image: + +BMP images have a header that starts with 2 byte-size fields followed by mostly +32 bit fields. The packed struct that represents this header can be seen below: + +typedef struct bmp_header { + /* Header */ + char signature[2]; + __u32 file_size; + __u32 reserved; + __u32 data_offset; + ... etc +} __attribute__ ((packed)) bmp_header_t; + +When placed in an aligned address such as 0x80a00000, char signature offsets +the __u32 fields into unaligned addresses (in our example 0x80a00002, +0x80a00006, and so on...). When these fields are accessed by U-Boot, a 32 bit +access is generated at a non-32-bit-aligned address, causing a data abort. +The proper alignment for BMP images is therefore: 32-bit-aligned-address + 2. diff --git a/doc/README.ns9750dev b/doc/README.ns9750dev deleted file mode 100644 index 29914406ba..0000000000 --- a/doc/README.ns9750dev +++ /dev/null @@ -1,36 +0,0 @@ -U-Boot Port to the NS9750 DevKit from NetSilicon - -1 Overview -2 Board Configuration -3 Installation - - -1 Overview ----------- - -This port supports these NS9750 features. - -o one UART - -2 Board Configuration ---------------------- - -Switches: -SW10: 4 -SW11: 6,7 -SW16: 6,7,8 -SW17-SW20: 1 -SW4: 3, 6 -SW 1: 1 -SW2: 4 -SW3: 3 -SW8: 3 (rotated by 180 degree!!!!) - -Serial Console is Port B (bottom right port) - -3 Installation --------------- - -Have fun, --- -Markus Pietrek <mpietrek@fsforth.de> diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 7d73ea02df..189b8839d5 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -9,85 +9,86 @@ maintain a list of such former fellows, so archeologists can check easily if here is something they might want to dig for... -Board Arch CPU removed Commit last known maintainer/contact -============================================================================= -AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de> -c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de> -ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de> -IAD210 powerpc mpc860 - - - -LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de> -SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de> -SX1 arm arm925t - - -TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de> -apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com> -tb0229 mips mips32 3f3110d 2011-12-12 -rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de> -OXC powerpc MPC8240 309a292 2011-12-07 -BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de> -xm250 arm pxa c746cdd 2011-25-11 -pleb2 arm pxa b185a1c 2011-25-11 -cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net> -cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com> -mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com> -ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de> -ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net> -zylonite arm pxa b66521a 2011-09-05 -shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de> -modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org> -lpc2292sodimm arm arm720t d1a067a 2011-09-05 -lart arm sa1100 3d57573 2011-09-05 Alex Züpke <azu@sysgo.de> -impa7 arm arm720t c1f8750 2011-09-05 Marius Gröger <mag@sysgo.de> -gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com> -evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com> -ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gröger <mag@sysgo.de> -dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Züpke <azu@sysgo.de> -SMN42 arm arm720t 6aac646 2011-09-05 -at91rm9200dk arm arm920t 1c85752 2011-07-17 -m501sk arm arm920t b1a2bd4 2011-07-17 -kb9202 arm arm920t 5bd3814 2011-07-17 -csb637 arm arm920t d14af08 2011-07-17 -cmc_pu2 arm arm920t 37a9b4d 2011-07-17 -at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net> -voiceblue arm arm925t 1b793a4 2011-07-17 -smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de> -sbc2410x arm arm920t 1f7f0ed 2011-07-17 -netstar arm arm925t 6ea2405 2011-07-17 -mx1fs2 arm arm920t 6962419 2011-07-17 -lpd7a404 arm lh7a40x 957731e 2011-07-17 -edb9301 arm arm920t 716f7ad 2011-07-17 -edb9302 arm arm920t 716f7ad 2011-07-17 -edb9302a arm arm920t 716f7ad 2011-07-17 -edb9307 arm arm920t 716f7ad 2011-07-17 -edb9307a arm arm920t 716f7ad 2011-07-17 -edb9312 arm arm920t 716f7ad 2011-07-17 -edb9315 arm arm920t 716f7ad 2011-07-17 -edb9315a arm arm920t 716f7ad 2011-07-17 -B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it> -armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com> -assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com> -trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de> -xsengine ARM PXA2xx 4262a7c 2010-10-20 -wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk> -delta ARM PXA2xx 75e2035 2010-10-20 -mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric@eukrea.com> -barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com> -ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de> -VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de> -NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> -CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> -logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at> -CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de> -PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de> -spieval powerpc MPC5200 69434e4 2010-09-19 -smmaco4 powerpc MPC5200 9ddc3af 2010-09-19 -HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de> -GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se> -AmigaOneG3SE 953b7e6 2010-06-23 -suzaku microblaze 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com> -XUPV2P microblaze 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu> -MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de> -adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com> -R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com> -CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com> -PCIPPC2 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de> +Board Arch CPU Commit Removed Last known maintainer/contact +================================================================================================= +ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de> +AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +IAD210 powerpc mpc860 1b0757e 2012-10-28 - +LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg@denx.de> +SX1 arm arm925t 53c4154 2012-10-26 +TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr@denx.de> +apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com> +tb0229 mips mips32 3f3110d 2011-12-12 +rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de> +OXC powerpc MPC8240 309a292 2011-12-07 +BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de> +xm250 arm pxa c746cdd 2011-25-11 +pleb2 arm pxa b185a1c 2011-25-11 +cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net> +cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com> +mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com> +ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de> +ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net> +zylonite arm pxa b66521a 2011-09-05 +shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de> +modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org> +lpc2292sodimm arm arm720t d1a067a 2011-09-05 +lart arm sa1100 3d57573 2011-09-05 Alex Züpke <azu@sysgo.de> +impa7 arm arm720t c1f8750 2011-09-05 Marius Gröger <mag@sysgo.de> +gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com> +evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com> +ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gröger <mag@sysgo.de> +dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Züpke <azu@sysgo.de> +SMN42 arm arm720t 6aac646 2011-09-05 +at91rm9200dk arm arm920t 1c85752 2011-07-17 +m501sk arm arm920t b1a2bd4 2011-07-17 +kb9202 arm arm920t 5bd3814 2011-07-17 +csb637 arm arm920t d14af08 2011-07-17 +cmc_pu2 arm arm920t 37a9b4d 2011-07-17 +at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net> +voiceblue arm arm925t 1b793a4 2011-07-17 +smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de> +sbc2410x arm arm920t 1f7f0ed 2011-07-17 +netstar arm arm925t 6ea2405 2011-07-17 +mx1fs2 arm arm920t 6962419 2011-07-17 +lpd7a404 arm lh7a40x 957731e 2011-07-17 +edb9301 arm arm920t 716f7ad 2011-07-17 +edb9302 arm arm920t 716f7ad 2011-07-17 +edb9302a arm arm920t 716f7ad 2011-07-17 +edb9307 arm arm920t 716f7ad 2011-07-17 +edb9307a arm arm920t 716f7ad 2011-07-17 +edb9312 arm arm920t 716f7ad 2011-07-17 +edb9315 arm arm920t 716f7ad 2011-07-17 +edb9315a arm arm920t 716f7ad 2011-07-17 +B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it> +armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com> +assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com> +trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de> +xsengine ARM PXA2xx 4262a7c 2010-10-20 +wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk> +delta ARM PXA2xx 75e2035 2010-10-20 +mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric@eukrea.com> +barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com> +ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de> +VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de> +NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> +CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> +logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at> +CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de> +PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de> +spieval powerpc MPC5200 69434e4 2010-09-19 +smmaco4 powerpc MPC5200 9ddc3af 2010-09-19 +HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de> +GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se> +AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23 +suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com> +XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu> +MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de> +adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com> +R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com> +CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com> +PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de> PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de> diff --git a/doc/SPL/README.am335x-network b/doc/SPL/README.am335x-network new file mode 100644 index 0000000000..e5a198f49c --- /dev/null +++ b/doc/SPL/README.am335x-network @@ -0,0 +1,92 @@ +USING AM335x NETBOOT FEATURE + + Some boards (like TI AM335x based ones) have quite big on-chip RAM and +have support for booting via network in ROM. The following describes +how to setup network booting and then optionally use this support to flash +NAND and bricked (empty) board with only a network cable. + + I. Building the required images + 1. You have to enable generic SPL configuration options (see +docs/README.SPL) as well as CONFIG_SPL_NET_SUPPORT, +CONFIG_ETH_SUPPORT, CONFIG_SPL_LIBGENERIC_SUPPORT and +CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build +SPL with support for booting over the network. Also you have to enable +the driver for the NIC used and CONFIG_SPL_BOARD_INIT option if your +board needs some board-specific initialization (TI AM335x EVM does). +If you want SPL to use some Vendor Class Identifier (VCI) you can set +one with CONFIG_SPL_NET_VCI_STRING option. am335x_evm configuration +comes with support for network booting preconfigured. + 2. Define CONFIG_BOOTCOMMAND for your board to load and run debrick +script after boot: +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "bootp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +(Or create additional board configuration with such option). + 3. Build U-Boot as usual + $ make <your_board_name> + You will need u-boot.img and spl/u-boot.bin images to perform +network boot. Copy them to u-boot-restore.img and +u-boot-spl-restore.bin respectively to distinguish this version +(with automatic restore running) from the main one. + + II. Host configuration. + 1. Setup DHCP server (recommended server is ISC DHCPd). + - Install DHCP server and setup it to listen on the interface you +chose to connect to the board (usually configured in +/etc/default/dhcpd or /etc/default/isc-dhcp-server). Make sure there +are no other active DHCP servers in the same network segment. + - Edit your dhcpd.conf and subnet declaration matching the address +on the interface. Specify the range of assigned addresses and bootfile +to use. IMPORTANT! Both RBL and SPL use the image filename provided +in the BOOTP reply but obviously they need different images (RBL needs +raw SPL image -- u-boot-spl-restore.bin while SPL needs main U-Boot +image -- u-boot-restore.img). So you have to configure DHCP server to +provide different image filenames to RBL and SPL (and possibly another +one to main U-Boot). This can be done by checking Vendor Class +Identifier (VCI) set by BOOTP client (RBL sets VCI to "DM814x ROM v1.0" +and you can set VCI used by SPL with CONFIG_SPL_NET_VCI_STRING option, +see above). + - If you plan to use TFTP server on another machine you have to set +server-name option to point to it. + - Here is sample configuration for ISC DHCPd, assuming the interface +used to connect to the board is eth0, and it has address 192.168.8.1: + +subnet 192.168.8.0 netmask 255.255.255.0 { + range dynamic-bootp 192.168.8.100 192.168.8.199; + + if substring (option vendor-class-identifier, 0, 10) = "DM814x ROM" { + filename "u-boot-spl-restore.bin"; + } elsif substring (option vendor-class-identifier, 0, 17) = "AM335x U-Boot SPL" { + filename "u-boot-restore.img"; + } else { + filename "uImage"; + } +} + + 2. Setup TFTP server. + Install TFTP server and put image files to it's root directory +(likely /tftpboot or /var/lib/tftpboot or /srv/tftp). You will need +u-boot.img and spl/u-boot-spl-bin files from U-Boot build directory. + + III. Reflashing (debricking) the board. + 1. Write debrick script. You will need to write a script that will +be executed after network boot to perform actual rescue actions. You +can use usual U-Boot commands from this script: tftp to load additional +files, nand erase/nand write to erase/write the NAND flash. + + 2. Create script image from your script. From U-Boot build directory: + +$ ./tools/mkimage -A arm -O U-Boot -C none -T script -d <your script> debrick.scr + +This will create debrick.scr file with your script inside. + + 3. Copy debrick.scr to TFTP root directory. You also need to copy +there all the files your script tries to load via TFTP. Example script +loads u-boot.img and MLO. You have to create these files doing regular +(not restore_flash) build and copy them to tftpboot directory. + + 4. Boot the board from the network, U-Boot will load debrick script +and run it after boot. diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt index c6a8ab0521..ef71fea2b8 100644 --- a/doc/driver-model/UDM-serial.txt +++ b/doc/driver-model/UDM-serial.txt @@ -86,7 +86,7 @@ III) Analysis of in-tree drivers 7) ns9750_serial.c ------------------ - No support for CONFIG_SERIAL_MULTI. Simple conversion possible. + Unmaintained port. Code got removed. 8) opencores_yanu.c ------------------- diff --git a/drivers/gpio/da8xx_gpio.c b/drivers/gpio/da8xx_gpio.c index ed6a1180d4..76648d27d4 100644 --- a/drivers/gpio/da8xx_gpio.c +++ b/drivers/gpio/da8xx_gpio.c @@ -34,6 +34,138 @@ static struct gpio_registry { #if defined(CONFIG_SOC_DA8XX) #define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) +#if defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850) +static const struct pinmux_config gpio_pinmux[] = { + { pinmux(13), 8, 6 }, /* GP0[0] */ + { pinmux(13), 8, 7 }, + { pinmux(14), 8, 0 }, + { pinmux(14), 8, 1 }, + { pinmux(14), 8, 2 }, + { pinmux(14), 8, 3 }, + { pinmux(14), 8, 4 }, + { pinmux(14), 8, 5 }, + { pinmux(14), 8, 6 }, + { pinmux(14), 8, 7 }, + { pinmux(15), 8, 0 }, + { pinmux(15), 8, 1 }, + { pinmux(15), 8, 2 }, + { pinmux(15), 8, 3 }, + { pinmux(15), 8, 4 }, + { pinmux(15), 8, 5 }, + { pinmux(15), 8, 6 }, /* GP1[0] */ + { pinmux(15), 8, 7 }, + { pinmux(16), 8, 0 }, + { pinmux(16), 8, 1 }, + { pinmux(16), 8, 2 }, + { pinmux(16), 8, 3 }, + { pinmux(16), 8, 4 }, + { pinmux(16), 8, 5 }, + { pinmux(16), 8, 6 }, + { pinmux(16), 8, 7 }, + { pinmux(17), 8, 0 }, + { pinmux(17), 8, 1 }, + { pinmux(17), 8, 2 }, + { pinmux(17), 8, 3 }, + { pinmux(17), 8, 4 }, + { pinmux(17), 8, 5 }, + { pinmux(17), 8, 6 }, /* GP2[0] */ + { pinmux(17), 8, 7 }, + { pinmux(18), 8, 0 }, + { pinmux(18), 8, 1 }, + { pinmux(18), 8, 2 }, + { pinmux(18), 8, 3 }, + { pinmux(18), 8, 4 }, + { pinmux(18), 8, 5 }, + { pinmux(18), 8, 6 }, + { pinmux(18), 8, 7 }, + { pinmux(19), 8, 0 }, + { pinmux(9), 8, 2 }, + { pinmux(9), 8, 3 }, + { pinmux(9), 8, 4 }, + { pinmux(9), 8, 5 }, + { pinmux(9), 8, 6 }, + { pinmux(10), 8, 1 }, /* GP3[0] */ + { pinmux(10), 8, 2 }, + { pinmux(10), 8, 3 }, + { pinmux(10), 8, 4 }, + { pinmux(10), 8, 5 }, + { pinmux(10), 8, 6 }, + { pinmux(10), 8, 7 }, + { pinmux(11), 8, 0 }, + { pinmux(11), 8, 1 }, + { pinmux(11), 8, 2 }, + { pinmux(11), 8, 3 }, + { pinmux(11), 8, 4 }, + { pinmux(9), 8, 7 }, + { pinmux(2), 8, 6 }, + { pinmux(11), 8, 5 }, + { pinmux(11), 8, 6 }, + { pinmux(12), 8, 4 }, /* GP4[0] */ + { pinmux(12), 8, 5 }, + { pinmux(12), 8, 6 }, + { pinmux(12), 8, 7 }, + { pinmux(13), 8, 0 }, + { pinmux(13), 8, 1 }, + { pinmux(13), 8, 2 }, + { pinmux(13), 8, 3 }, + { pinmux(13), 8, 4 }, + { pinmux(13), 8, 5 }, + { pinmux(11), 8, 7 }, + { pinmux(12), 8, 0 }, + { pinmux(12), 8, 1 }, + { pinmux(12), 8, 2 }, + { pinmux(12), 8, 3 }, + { pinmux(9), 8, 1 }, + { pinmux(7), 8, 3 }, /* GP5[0] */ + { pinmux(7), 8, 4 }, + { pinmux(7), 8, 5 }, + { pinmux(7), 8, 6 }, + { pinmux(7), 8, 7 }, + { pinmux(8), 8, 0 }, + { pinmux(8), 8, 1 }, + { pinmux(8), 8, 2 }, + { pinmux(8), 8, 3 }, + { pinmux(8), 8, 4 }, + { pinmux(8), 8, 5 }, + { pinmux(8), 8, 6 }, + { pinmux(8), 8, 7 }, + { pinmux(9), 8, 0 }, + { pinmux(7), 8, 1 }, + { pinmux(7), 8, 2 }, + { pinmux(5), 8, 1 }, /* GP6[0] */ + { pinmux(5), 8, 2 }, + { pinmux(5), 8, 3 }, + { pinmux(5), 8, 4 }, + { pinmux(5), 8, 5 }, + { pinmux(5), 8, 6 }, + { pinmux(5), 8, 7 }, + { pinmux(6), 8, 0 }, + { pinmux(6), 8, 1 }, + { pinmux(6), 8, 2 }, + { pinmux(6), 8, 3 }, + { pinmux(6), 8, 4 }, + { pinmux(6), 8, 5 }, + { pinmux(6), 8, 6 }, + { pinmux(6), 8, 7 }, + { pinmux(7), 8, 0 }, + { pinmux(1), 8, 0 }, /* GP7[0] */ + { pinmux(1), 8, 1 }, + { pinmux(1), 8, 2 }, + { pinmux(1), 8, 3 }, + { pinmux(1), 8, 4 }, + { pinmux(1), 8, 5 }, + { pinmux(1), 8, 6 }, + { pinmux(1), 8, 7 }, + { pinmux(2), 8, 0 }, + { pinmux(2), 8, 1 }, + { pinmux(2), 8, 2 }, + { pinmux(2), 8, 3 }, + { pinmux(2), 8, 4 }, + { pinmux(2), 8, 5 }, + { pinmux(0), 1, 0 }, + { pinmux(0), 1, 1 }, +}; +#else /* CONFIG_SOC_DA8XX && CONFIG_SOC_DA850 */ static const struct pinmux_config gpio_pinmux[] = { { pinmux(1), 8, 7 }, /* GP0[0] */ { pinmux(1), 8, 6 }, @@ -180,9 +312,10 @@ static const struct pinmux_config gpio_pinmux[] = { { pinmux(18), 8, 3 }, { pinmux(18), 8, 2 }, }; -#else +#endif /* CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850 */ +#else /* !CONFIG_SOC_DA8XX */ #define davinci_configure_pin_mux(a, b) -#endif +#endif /* CONFIG_SOC_DA8XX */ int gpio_request(unsigned gpio, const char *label) { diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index efc77fa910..ca71cd3ee4 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -46,6 +46,7 @@ struct i2c_bus { struct i2c_control *control; struct i2c_ctlr *regs; int is_dvc; /* DVC type, rather than I2C */ + int is_scs; /* single clock source (T114+) */ int inited; /* bus is inited */ }; @@ -88,7 +89,28 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus) * 16 to get the right frequency. */ clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH, - i2c_bus->speed * 2 * 8); + i2c_bus->speed * 2 * 8); + + if (i2c_bus->is_scs) { + /* + * T114 I2C went to a single clock source for standard/fast and + * HS clock speeds. The new clock rate setting calculation is: + * SCL = CLK_SOURCE.I2C / + * (CLK_MULT_STD_FAST_MODE * (I2C_CLK_DIV_STD_FAST_MODE+1) * + * I2C FREQUENCY DIVISOR) as per the T114 TRM (sec 30.3.1). + * + * NOTE: We do this here, after the initial clock/pll start, + * because if we read the clk_div reg before the controller + * is running, we hang, and we need it for the new calc. + */ + int clk_div_stdfst_mode = readl(&i2c_bus->regs->clk_div) >> 16; + debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__, + clk_div_stdfst_mode); + + clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH, + CLK_MULT_STD_FAST_MODE * (clk_div_stdfst_mode + 1) * + i2c_bus->speed * 2); + } /* Reset I2C controller. */ i2c_reset_controller(i2c_bus); @@ -352,10 +374,11 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus) * @param node_list list of nodes to process (any <=0 are ignored) * @param count number of nodes to process * @param is_dvc 1 if these are DVC ports, 0 if standard I2C + * @param is_scs 1 if this HW uses a single clock source (T114+) * @return 0 if ok, -1 on error */ static int process_nodes(const void *blob, int node_list[], int count, - int is_dvc) + int is_dvc, int is_scs) { struct i2c_bus *i2c_bus; int i; @@ -375,6 +398,8 @@ static int process_nodes(const void *blob, int node_list[], int count, return -1; } + i2c_bus->is_scs = is_scs; + i2c_bus->is_dvc = is_dvc; if (is_dvc) { i2c_bus->control = @@ -403,18 +428,25 @@ void i2c_init_board(void) const void *blob = gd->fdt_blob; int count; - /* First get the normal i2c ports */ + /* First check for newer (T114+) I2C ports */ + count = fdtdec_find_aliases_for_id(blob, "i2c", + COMPAT_NVIDIA_TEGRA114_I2C, node_list, + TEGRA_I2C_NUM_CONTROLLERS); + if (process_nodes(blob, node_list, count, 0, 1)) + return; + + /* Now get the older (T20/T30) normal I2C ports */ count = fdtdec_find_aliases_for_id(blob, "i2c", COMPAT_NVIDIA_TEGRA20_I2C, node_list, TEGRA_I2C_NUM_CONTROLLERS); - if (process_nodes(blob, node_list, count, 0)) + if (process_nodes(blob, node_list, count, 0, 0)) return; /* Now look for dvc ports */ count = fdtdec_add_aliases_for_id(blob, "i2c", COMPAT_NVIDIA_TEGRA20_DVC, node_list, TEGRA_I2C_NUM_CONTROLLERS); - if (process_nodes(blob, node_list, count, 1)) + if (process_nodes(blob, node_list, count, 1, 0)) return; } diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c index af1380a455..ab2e81e5d4 100644 --- a/drivers/mmc/arm_pl180_mmci.c +++ b/drivers/mmc/arm_pl180_mmci.c @@ -377,6 +377,7 @@ int arm_pl180_mmci_init(struct pl180_mmc_host *host) dev->set_ios = host_set_ios; dev->init = mmc_host_reset; dev->getcd = NULL; + dev->getwp = NULL; dev->host_caps = host->caps; dev->voltages = host->voltages; dev->f_min = host->clock_min; diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c index 0f98b961fd..26311741f5 100644 --- a/drivers/mmc/bfin_sdh.c +++ b/drivers/mmc/bfin_sdh.c @@ -287,6 +287,7 @@ int bfin_mmc_init(bd_t *bis) mmc->set_ios = bfin_sdh_set_ios; mmc->init = bfin_sdh_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->host_caps = MMC_MODE_4BIT; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c index ee8f2614de..e2379e326e 100644 --- a/drivers/mmc/davinci_mmc.c +++ b/drivers/mmc/davinci_mmc.c @@ -388,6 +388,7 @@ int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host) mmc->set_ios = dmmc_set_ios; mmc->init = dmmc_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->f_min = 200000; mmc->f_max = 25000000; diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index b90f3e7769..54b5363169 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -552,6 +552,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) mmc->set_ios = esdhc_set_ios; mmc->init = esdhc_init; mmc->getcd = esdhc_getcd; + mmc->getwp = NULL; voltage_caps = 0; caps = regs->hostcapblt; diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c index f1702fe33b..42f0e0ce55 100644 --- a/drivers/mmc/ftsdc010_esdhc.c +++ b/drivers/mmc/ftsdc010_esdhc.c @@ -666,6 +666,7 @@ int ftsdc010_mmc_init(int dev_index) mmc->set_ios = ftsdc010_set_ios; mmc->init = ftsdc010_core_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 67b2dbe8d4..70a9f91c8d 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -349,6 +349,7 @@ int atmel_mci_init(void *regs) mmc->set_ios = mci_set_ios; mmc->init = mci_init; mmc->getcd = NULL; + mmc->getwp = NULL; /* need to be able to pass these in on a board by board basis */ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 72e8ce6da4..7b5fdd9f66 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -40,6 +40,23 @@ static struct list_head mmc_devices; static int cur_dev_num = -1; +int __weak board_mmc_getwp(struct mmc *mmc) +{ + return -1; +} + +int mmc_getwp(struct mmc *mmc) +{ + int wp; + + wp = board_mmc_getwp(mmc); + + if ((wp < 0) && mmc->getwp) + wp = mmc->getwp(mmc); + + return wp; +} + int __board_mmc_getcd(struct mmc *mmc) { return -1; } diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c index 11ba532b0c..fe6a5a166d 100644 --- a/drivers/mmc/mmc_spi.c +++ b/drivers/mmc/mmc_spi.c @@ -273,6 +273,7 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode) mmc->set_ios = mmc_spi_set_ios; mmc->init = mmc_spi_init_p; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->host_caps = MMC_MODE_SPI; mmc->voltages = MMC_SPI_VOLTAGE; diff --git a/drivers/mmc/mxcmmc.c b/drivers/mmc/mxcmmc.c index d58c18bc2a..4f99617b9a 100644 --- a/drivers/mmc/mxcmmc.c +++ b/drivers/mmc/mxcmmc.c @@ -499,6 +499,7 @@ static int mxcmci_initialize(bd_t *bis) mmc->set_ios = mxcmci_set_ios; mmc->init = mxcmci_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->host_caps = MMC_MODE_4BIT; host->base = (struct mxcmci_regs *)CONFIG_MXC_MCI_REGS_BASE; diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index a72f66cc7a..a89660f130 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -53,12 +53,6 @@ struct mxsmmc_priv { struct mxs_dma_desc *desc; }; -#if defined(CONFIG_MX23) -static const unsigned int mxsmmc_id_offset = 1; -#elif defined(CONFIG_MX28) -static const unsigned int mxsmmc_id_offset = 0; -#endif - #define MXSMMC_MAX_TIMEOUT 10000 #define MXSMMC_SMALL_TRANSFER 512 @@ -137,7 +131,7 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data) priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | (data_count << MXS_DMA_DESC_BYTES_OFFSET); - dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id + mxsmmc_id_offset; + dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id; mxs_dma_desc_append(dmach, priv->desc); if (mxs_dma_go(dmach)) { bounce_buffer_stop(&bbstate); @@ -390,15 +384,9 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)) struct mmc *mmc = NULL; struct mxsmmc_priv *priv = NULL; int ret; -#if defined(CONFIG_MX23) - const unsigned int mxsmmc_max_id = 2; - const unsigned int mxsmmc_clk_id = 0; -#elif defined(CONFIG_MX28) - const unsigned int mxsmmc_max_id = 4; - const unsigned int mxsmmc_clk_id = id; -#endif + const unsigned int mxsmmc_clk_id = mxs_ssp_clock_by_bus(id); - if (id >= mxsmmc_max_id) + if (!mxs_ssp_bus_id_valid(id)) return -ENODEV; mmc = malloc(sizeof(struct mmc)); @@ -418,7 +406,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)) return -ENOMEM; } - ret = mxs_dma_init_channel(id + mxsmmc_id_offset); + ret = mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + id); if (ret) return ret; @@ -432,6 +420,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)) mmc->set_ios = mxsmmc_set_ios; mmc->init = mxsmmc_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->priv = priv; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index afd9b30b51..67cfcc24dc 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -30,6 +30,7 @@ #include <twl4030.h> #include <twl6030.h> #include <twl6035.h> +#include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> @@ -38,30 +39,71 @@ #define SYSCTL_SRC (1 << 25) #define SYSCTL_SRD (1 << 26) +struct omap_hsmmc_data { + struct hsmmc *base_addr; + int cd_gpio; + int wp_gpio; +}; + /* If we fail after 1 second wait, something is really bad */ #define MAX_RETRY_MS 1000 static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size); static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int siz); -static struct mmc hsmmc_dev[2]; +static struct mmc hsmmc_dev[3]; +static struct omap_hsmmc_data hsmmc_dev_data[3]; + +#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO_SUPPORT)) +static int omap_mmc_setup_gpio_in(int gpio, const char *label) +{ + if (!gpio_is_valid(gpio)) + return -1; + + if (gpio_request(gpio, label) < 0) + return -1; + + if (gpio_direction_input(gpio) < 0) + return -1; + + return gpio; +} + +static int omap_mmc_getcd(struct mmc *mmc) +{ + int cd_gpio = ((struct omap_hsmmc_data *)mmc->priv)->cd_gpio; + return gpio_get_value(cd_gpio); +} + +static int omap_mmc_getwp(struct mmc *mmc) +{ + int wp_gpio = ((struct omap_hsmmc_data *)mmc->priv)->wp_gpio; + return gpio_get_value(wp_gpio); +} +#else +static inline int omap_mmc_setup_gpio_in(int gpio, const char *label) +{ + return -1; +} + +#define omap_mmc_getcd NULL +#define omap_mmc_getwp NULL +#endif #if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER) static void omap4_vmmc_pbias_config(struct mmc *mmc) { u32 value = 0; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - value = readl(&ctrl->control_pbiaslite); + value = readl((*ctrl)->control_pbiaslite); value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ); - writel(value, &ctrl->control_pbiaslite); + writel(value, (*ctrl)->control_pbiaslite); /* set VMMC to 3V */ twl6030_power_mmc_init(); - value = readl(&ctrl->control_pbiaslite); + value = readl((*ctrl)->control_pbiaslite); value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ; - writel(value, &ctrl->control_pbiaslite); + writel(value, (*ctrl)->control_pbiaslite); } #endif @@ -69,26 +111,24 @@ static void omap4_vmmc_pbias_config(struct mmc *mmc) static void omap5_pbias_config(struct mmc *mmc) { u32 value = 0; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - value = readl(&ctrl->control_pbias); + value = readl((*ctrl)->control_pbias); value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); value |= SDCARD_BIAS_HIZ_MODE; - writel(value, &ctrl->control_pbias); + writel(value, (*ctrl)->control_pbias); twl6035_mmc1_poweron_ldo(); - value = readl(&ctrl->control_pbias); + value = readl((*ctrl)->control_pbias); value &= ~SDCARD_BIAS_HIZ_MODE; value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ; - writel(value, &ctrl->control_pbias); + writel(value, (*ctrl)->control_pbias); - value = readl(&ctrl->control_pbias); + value = readl((*ctrl)->control_pbias); if (value & (1 << 23)) { value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); value |= SDCARD_BIAS_HIZ_MODE; - writel(value, &ctrl->control_pbias); + writel(value, (*ctrl)->control_pbias); } } #endif @@ -177,11 +217,12 @@ void mmc_init_stream(struct hsmmc *mmc_base) static int mmc_init_setup(struct mmc *mmc) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int reg_val; unsigned int dsor; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; mmc_board_init(mmc); writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET, @@ -262,10 +303,11 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int flags, mmc_stat; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; start = get_timer(0); while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { @@ -489,10 +531,11 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, static void mmc_set_ios(struct mmc *mmc) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int dsor = 0; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; /* configue bus width */ switch (mmc->bus_width) { case 8: @@ -540,36 +583,40 @@ static void mmc_set_ios(struct mmc *mmc) writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); } -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max) +int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, + int wp_gpio) { - struct mmc *mmc; - - mmc = &hsmmc_dev[dev_index]; + struct mmc *mmc = &hsmmc_dev[dev_index]; + struct omap_hsmmc_data *priv_data = &hsmmc_dev_data[dev_index]; sprintf(mmc->name, "OMAP SD/MMC"); mmc->send_cmd = mmc_send_cmd; mmc->set_ios = mmc_set_ios; mmc->init = mmc_init_setup; - mmc->getcd = NULL; + mmc->getcd = omap_mmc_getcd; + mmc->getwp = omap_mmc_getwp; + mmc->priv = priv_data; switch (dev_index) { case 0: - mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; break; #ifdef OMAP_HSMMC2_BASE case 1: - mmc->priv = (struct hsmmc *)OMAP_HSMMC2_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE; break; #endif #ifdef OMAP_HSMMC3_BASE case 2: - mmc->priv = (struct hsmmc *)OMAP_HSMMC3_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE; break; #endif default: - mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; return 1; } + priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd"); + priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp"); mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC) & ~host_caps_mask; diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index b9cbe34f1f..daca0ea4f7 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -438,6 +438,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) mmc->set_ios = sdhci_set_ios; mmc->init = sdhci_init; mmc->getcd = NULL; + mmc->getwp = NULL; caps = sdhci_readl(host, SDHCI_CAPABILITIES); #ifdef CONFIG_MMC_SDMA diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c index 4588568a6d..011d4f3e63 100644 --- a/drivers/mmc/sh_mmcif.c +++ b/drivers/mmc/sh_mmcif.c @@ -599,6 +599,7 @@ int mmcif_mmc_init(void) mmc->set_ios = sh_mmcif_set_ios; mmc->init = sh_mmcif_init; mmc->getcd = NULL; + mmc->getwp = NULL; host->regs = (struct sh_mmcif_regs *)CONFIG_SH_MMCIF_ADDR; host->clk = CONFIG_SH_MMCIF_CLK; mmc->priv = host; diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index d749ab095e..e86bc680ff 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -2,7 +2,7 @@ * (C) Copyright 2009 SAMSUNG Electronics * Minkyu Kang <mk7.kang@samsung.com> * Jaehoon Chung <jh80.chung@samsung.com> - * Portions Copyright 2011-2012 NVIDIA Corporation + * Portions Copyright 2011-2013 NVIDIA Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,43 +28,45 @@ #include <asm/arch-tegra/tegra_mmc.h> #include <mmc.h> -/* support 4 mmc hosts */ -struct mmc mmc_dev[4]; -struct mmc_host mmc_host[4]; +DECLARE_GLOBAL_DATA_PTR; +struct mmc mmc_dev[MAX_HOSTS]; +struct mmc_host mmc_host[MAX_HOSTS]; -/** - * Get the host address and peripheral ID for a device. Devices are numbered - * from 0 to 3. - * - * @param host Structure to fill in (base, reg, mmc_id) - * @param dev_index Device index (0-3) - */ -static void tegra_get_setup(struct mmc_host *host, int dev_index) +#ifndef CONFIG_OF_CONTROL +#error "Please enable device tree support to use this driver" +#endif + +static void mmc_set_power(struct mmc_host *host, unsigned short power) { - debug("tegra_get_setup: dev_index = %d\n", dev_index); - - switch (dev_index) { - case 1: - host->base = TEGRA_SDMMC3_BASE; - host->mmc_id = PERIPH_ID_SDMMC3; - break; - case 2: - host->base = TEGRA_SDMMC2_BASE; - host->mmc_id = PERIPH_ID_SDMMC2; - break; - case 3: - host->base = TEGRA_SDMMC1_BASE; - host->mmc_id = PERIPH_ID_SDMMC1; - break; - case 0: - default: - host->base = TEGRA_SDMMC4_BASE; - host->mmc_id = PERIPH_ID_SDMMC4; - break; + u8 pwr = 0; + debug("%s: power = %x\n", __func__, power); + + if (power != (unsigned short)-1) { + switch (1 << power) { + case MMC_VDD_165_195: + pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3; + break; + } } + debug("%s: pwr = %X\n", __func__, pwr); - host->reg = (struct tegra_mmc *)host->base; + /* Set the bus voltage first (if any) */ + writeb(pwr, &host->reg->pwrcon); + if (pwr == 0) + return; + + /* Now enable bus power */ + pwr |= TEGRA_MMC_PWRCTL_SD_BUS_POWER; + writeb(pwr, &host->reg->pwrcon); } static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data, @@ -363,8 +365,7 @@ static void mmc_change_clock(struct mmc_host *host, uint clock) debug(" mmc_change_clock called\n"); /* - * Change Tegra SDMMCx clock divisor here. Source is 216MHz, - * PLLP_OUT0 + * Change Tegra SDMMCx clock divisor here. Source is PLLP_OUT0 */ if (clock == 0) goto out; @@ -439,7 +440,7 @@ static void mmc_set_ios(struct mmc *mmc) debug("mmc_set_ios: hostctl = %08X\n", ctrl); } -static void mmc_reset(struct mmc_host *host) +static void mmc_reset(struct mmc_host *host, struct mmc *mmc) { unsigned int timeout; debug(" mmc_reset called\n"); @@ -465,6 +466,14 @@ static void mmc_reset(struct mmc_host *host) timeout--; udelay(1000); } + + /* Set SD bus voltage & enable bus power */ + mmc_set_power(host, fls(mmc->voltages) - 1); + debug("%s: power control = %02X, host control = %02X\n", __func__, + readb(&host->reg->pwrcon), readb(&host->reg->hostctl)); + + /* Make sure SDIO pads are set up */ + pad_init_mmc(host); } static int mmc_core_init(struct mmc *mmc) @@ -473,7 +482,7 @@ static int mmc_core_init(struct mmc *mmc) unsigned int mask; debug(" mmc_core_init called\n"); - mmc_reset(host); + mmc_reset(host, mmc); host->version = readw(&host->reg->hcver); debug("host version = %x\n", host->version); @@ -518,41 +527,43 @@ int tegra_mmc_getcd(struct mmc *mmc) debug("tegra_mmc_getcd called\n"); - if (host->cd_gpio >= 0) - return !gpio_get_value(host->cd_gpio); + if (fdt_gpio_isvalid(&host->cd_gpio)) + return fdtdec_get_gpio(&host->cd_gpio); return 1; } -int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) +static int do_mmc_init(int dev_index) { struct mmc_host *host; char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */ struct mmc *mmc; - debug(" tegra_mmc_init: index %d, bus width %d " - "pwr_gpio %d cd_gpio %d\n", - dev_index, bus_width, pwr_gpio, cd_gpio); - + /* DT should have been read & host config filled in */ host = &mmc_host[dev_index]; + if (!host->enabled) + return -1; - host->clock = 0; - host->pwr_gpio = pwr_gpio; - host->cd_gpio = cd_gpio; - tegra_get_setup(host, dev_index); + debug(" do_mmc_init: index %d, bus width %d " + "pwr_gpio %d cd_gpio %d\n", + dev_index, host->width, + host->pwr_gpio.gpio, host->cd_gpio.gpio); + host->clock = 0; clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000); - if (host->pwr_gpio >= 0) { + if (fdt_gpio_isvalid(&host->pwr_gpio)) { sprintf(gpusage, "SD/MMC%d PWR", dev_index); - gpio_request(host->pwr_gpio, gpusage); - gpio_direction_output(host->pwr_gpio, 1); + gpio_request(host->pwr_gpio.gpio, gpusage); + gpio_direction_output(host->pwr_gpio.gpio, 1); + debug(" Power GPIO name = %s\n", host->pwr_gpio.name); } - if (host->cd_gpio >= 0) { + if (fdt_gpio_isvalid(&host->cd_gpio)) { sprintf(gpusage, "SD/MMC%d CD", dev_index); - gpio_request(host->cd_gpio, gpusage); - gpio_direction_input(host->cd_gpio); + gpio_request(host->cd_gpio.gpio, gpusage); + gpio_direction_input(host->cd_gpio.gpio); + debug(" CD GPIO name = %s\n", host->cd_gpio.name); } mmc = &mmc_dev[dev_index]; @@ -563,12 +574,13 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) mmc->set_ios = mmc_set_ios; mmc->init = mmc_core_init; mmc->getcd = tegra_mmc_getcd; + mmc->getwp = NULL; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; mmc->host_caps = 0; - if (bus_width == 8) + if (host->width == 8) mmc->host_caps |= MMC_MODE_8BIT; - if (bus_width >= 4) + if (host->width >= 4) mmc->host_caps |= MMC_MODE_4BIT; mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC; @@ -577,8 +589,6 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) * low-speed SDIO card frequency (actually 400KHz) * max freq is highest HS eMMC clock as per the SD/MMC spec * (actually 52MHz) - * Both of these are the closest equivalents w/216MHz source - * clock and Tegra SDMMC divisors. */ mmc->f_min = 375000; mmc->f_max = 48000000; @@ -587,3 +597,104 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) return 0; } + +/** + * Get the host address and peripheral ID for a node. + * + * @param blob fdt blob + * @param node Device index (0-3) + * @param host Structure to fill in (reg, width, mmc_id) + */ +static int mmc_get_config(const void *blob, int node, struct mmc_host *host) +{ + debug("%s: node = %d\n", __func__, node); + + host->enabled = fdtdec_get_is_enabled(blob, node); + + host->reg = (struct tegra_mmc *)fdtdec_get_addr(blob, node, "reg"); + if ((fdt_addr_t)host->reg == FDT_ADDR_T_NONE) { + debug("%s: no sdmmc base reg info found\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + host->mmc_id = clock_decode_periph_id(blob, node); + if (host->mmc_id == PERIPH_ID_NONE) { + debug("%s: could not decode periph id\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + /* + * NOTE: mmc->bus_width is determined by mmc.c dynamically. + * TBD: Override it with this value? + */ + host->width = fdtdec_get_int(blob, node, "bus-width", 0); + if (!host->width) + debug("%s: no sdmmc width found\n", __func__); + + /* These GPIOs are optional */ + fdtdec_decode_gpio(blob, node, "cd-gpios", &host->cd_gpio); + fdtdec_decode_gpio(blob, node, "wp-gpios", &host->wp_gpio); + fdtdec_decode_gpio(blob, node, "power-gpios", &host->pwr_gpio); + + debug("%s: found controller at %p, width = %d, periph_id = %d\n", + __func__, host->reg, host->width, host->mmc_id); + return 0; +} + +/* + * Process a list of nodes, adding them to our list of SDMMC ports. + * + * @param blob fdt blob + * @param node_list list of nodes to process (any <=0 are ignored) + * @param count number of nodes to process + * @return 0 if ok, -1 on error + */ +static int process_nodes(const void *blob, int node_list[], int count) +{ + struct mmc_host *host; + int i, node; + + debug("%s: count = %d\n", __func__, count); + + /* build mmc_host[] for each controller */ + for (i = 0; i < count; i++) { + node = node_list[i]; + if (node <= 0) + continue; + + host = &mmc_host[i]; + host->id = i; + + if (mmc_get_config(blob, node, host)) { + printf("%s: failed to decode dev %d\n", __func__, i); + return -1; + } + do_mmc_init(i); + } + return 0; +} + +void tegra_mmc_init(void) +{ + int node_list[MAX_HOSTS], count; + const void *blob = gd->fdt_blob; + debug("%s entry\n", __func__); + + /* See if any Tegra30 MMC controllers are present */ + count = fdtdec_find_aliases_for_id(blob, "sdhci", + COMPAT_NVIDIA_TEGRA30_SDMMC, node_list, MAX_HOSTS); + debug("%s: count of T30 sdhci nodes is %d\n", __func__, count); + if (process_nodes(blob, node_list, count)) { + printf("%s: Error processing T30 mmc node(s)!\n", __func__); + return; + } + + /* Now look for any Tegra20 MMC controllers */ + count = fdtdec_find_aliases_for_id(blob, "sdhci", + COMPAT_NVIDIA_TEGRA20_SDMMC, node_list, MAX_HOSTS); + debug("%s: count of T20 sdhci nodes is %d\n", __func__, count); + if (process_nodes(blob, node_list, count)) { + printf("%s: Error processing T20 mmc node(s)!\n", __func__); + return; + } +} diff --git a/drivers/mtd/onenand/onenand_spl.c b/drivers/mtd/onenand/onenand_spl.c index 50eaa71882..4bec2c2adc 100644 --- a/drivers/mtd/onenand/onenand_spl.c +++ b/drivers/mtd/onenand/onenand_spl.c @@ -112,7 +112,7 @@ static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf, void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst) { uint32_t *addr = (uint32_t *)dst; - uint32_t total_pages; + uint32_t to_page; uint32_t block; uint32_t page, rpage; enum onenand_spl_pagesize pagesize; @@ -125,22 +125,20 @@ void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst) * pulling further unwanted functions into the SPL. */ if (pagesize == 2048) { - total_pages = DIV_ROUND_UP(size, 2048); page = offs / 2048; + to_page = page + DIV_ROUND_UP(size, 2048); } else { - total_pages = DIV_ROUND_UP(size, 4096); page = offs / 4096; + to_page = page + DIV_ROUND_UP(size, 4096); } - for (; page <= total_pages; page++) { + for (; page <= to_page; page++) { block = page / ONENAND_PAGES_PER_BLOCK; rpage = page & (ONENAND_PAGES_PER_BLOCK - 1); ret = onenand_spl_read_page(block, rpage, addr, pagesize); - if (ret) { - total_pages += ONENAND_PAGES_PER_BLOCK; + if (ret) page += ONENAND_PAGES_PER_BLOCK - 1; - } else { + else addr += pagesize / 4; - } } } diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index db04795dfc..93f8417a4c 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -227,6 +227,9 @@ struct cpsw_priv { struct cpsw_slave *slaves; struct phy_device *phydev; struct mii_dev *bus; + + u32 mdio_link; + u32 phy_mask; }; static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits) @@ -598,10 +601,21 @@ static int cpsw_update_link(struct cpsw_priv *priv) for_each_slave(slave, priv) cpsw_slave_update_link(slave, priv, &link); - + priv->mdio_link = readl(&mdio_regs->link); return link; } +static int cpsw_check_link(struct cpsw_priv *priv) +{ + u32 link = 0; + + link = __raw_readl(&mdio_regs->link) & priv->phy_mask; + if ((link) && (link == priv->mdio_link)) + return 1; + + return cpsw_update_link(priv); +} + static inline u32 cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num) { if (priv->host_port == 0) @@ -631,6 +645,8 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv) cpsw_ale_port_state(priv, slave_port, ALE_PORT_STATE_FORWARD); cpsw_ale_add_mcast(priv, NetBcastAddr, 1 << slave_port); + + priv->phy_mask |= 1 << slave->data->phy_id; } static struct cpdma_desc *cpdma_desc_alloc(struct cpsw_priv *priv) @@ -862,7 +878,7 @@ static int cpsw_send(struct eth_device *dev, void *packet, int length) int len; int timeout = CPDMA_TIMEOUT; - if (!cpsw_update_link(priv)) + if (!cpsw_check_link(priv)) return -EIO; flush_dcache_range((unsigned long)packet, diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 5e8b64873d..de3f471996 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -33,7 +33,6 @@ COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o COBJS-$(CONFIG_MCFUART) += mcfuart.o -COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o COBJS-$(CONFIG_SYS_NS16550) += ns16550.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c deleted file mode 100644 index 85fc68a076..0000000000 --- a/drivers/serial/ns9750_serial.c +++ /dev/null @@ -1,218 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_serial.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Serial driver for the NS9750. Only one UART is supported yet. - * @References: [1] NS9750 Hardware Reference/December 2003 - * @TODO: Implement Character GAP Timer when chip is fixed for PLL bypass - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#include <common.h> - -#include "ns9750_bbus.h" /* for GPIOs */ -#include "ns9750_ser.h" /* for serial configuration */ - -DECLARE_GLOBAL_DATA_PTR; - -#if !defined(CONFIG_CONS_INDEX) -#error "No console index specified." -#endif - -#define CONSOLE CONFIG_CONS_INDEX - -static unsigned int calcBitrateRegister( void ); -static unsigned int calcRxCharGapRegister( void ); - -static char cCharsAvailable; /* Numbers of chars in unCharCache */ -static unsigned int unCharCache; /* unCharCache is only valid if - * cCharsAvailable > 0 */ - -/*********************************************************************** - * @Function: serial_init - * @Return: 0 - * @Descr: configures GPIOs and UART. Requires BBUS Master Reset turned off - ***********************************************************************/ - -static int ns9750_serial_init(void) -{ - unsigned int aunGPIOTxD[] = { 0, 8, 40, 44 }; - unsigned int aunGPIORxD[] = { 1, 9, 41, 45 }; - - cCharsAvailable = 0; - - /* configure TxD and RxD pins for their special function */ - set_gpio_cfg_reg_val( aunGPIOTxD[ CONSOLE ], - NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_OUTPUT ); - set_gpio_cfg_reg_val( aunGPIORxD[ CONSOLE ], - NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_INPUT ); - - /* configure serial engine */ - *get_ser_reg_addr_channel( NS9750_SER_CTRL_A, CONSOLE ) = - NS9750_SER_CTRL_A_CE | - NS9750_SER_CTRL_A_STOP | - NS9750_SER_CTRL_A_WLS_8; - - serial_setbrg(); - - *get_ser_reg_addr_channel( NS9750_SER_CTRL_B, CONSOLE ) = - NS9750_SER_CTRL_B_RCGT; - - return 0; -} - -/*********************************************************************** - * @Function: serial_putc - * @Return: n/a - * @Descr: writes one character to the FIFO. Blocks until FIFO is not full - ***********************************************************************/ - -static void ns9750_serial_putc(const char c) -{ - if (c == '\n') - serial_putc( '\r' ); - - while (!(*get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE) & - NS9750_SER_STAT_A_TRDY ) ) { - /* do nothing, wait for characters in FIFO sent */ - } - - *(volatile char*) get_ser_reg_addr_channel( NS9750_SER_FIFO, - CONSOLE) = c; -} - -/*********************************************************************** - * @Function: serial_getc - * @Return: the character read - * @Descr: performs only 8bit accesses to the FIFO. No error handling - ***********************************************************************/ - -static int ns9750_serial_getc(void) -{ - int i; - - while (!serial_tstc() ) { - /* do nothing, wait for incoming characters */ - } - - /* at least one character in unCharCache */ - i = (int) (unCharCache & 0xff); - - unCharCache >>= 8; - cCharsAvailable--; - - return i; -} - -/*********************************************************************** - * @Function: serial_tstc - * @Return: 0 if no input available, otherwise != 0 - * @Descr: checks for incoming FIFO not empty. Stores the incoming chars in - * unCharCache and the numbers of characters in cCharsAvailable - ***********************************************************************/ - -static int ns9750_serial_tstc(void) -{ - unsigned int unRegCache; - - if ( cCharsAvailable ) - return 1; - - unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,CONSOLE ); - if( unRegCache & NS9750_SER_STAT_A_RBC ) { - *get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE ) = - NS9750_SER_STAT_A_RBC; - unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A, - CONSOLE ); - } - - if ( unRegCache & NS9750_SER_STAT_A_RRDY ) { - cCharsAvailable = (unRegCache & NS9750_SER_STAT_A_RXFDB_MA)>>20; - if ( !cCharsAvailable ) - cCharsAvailable = 4; - - unCharCache = *get_ser_reg_addr_channel( NS9750_SER_FIFO, - CONSOLE ); - return 1; - } - - /* no chars available */ - return 0; -} - -static void ns9750_serial_setbrg(void) -{ - *get_ser_reg_addr_channel( NS9750_SER_BITRATE, CONSOLE ) = - calcBitrateRegister(); - *get_ser_reg_addr_channel( NS9750_SER_RX_CHAR_TIMER, CONSOLE ) = - calcRxCharGapRegister(); -} - -/*********************************************************************** - * @Function: calcBitrateRegister - * @Return: value for the serial bitrate register - * @Descr: register value depends on clock frequency and baudrate - ***********************************************************************/ - -static unsigned int calcBitrateRegister( void ) -{ - return ( NS9750_SER_BITRATE_EBIT | - NS9750_SER_BITRATE_CLKMUX_BCLK | - NS9750_SER_BITRATE_TMODE | - NS9750_SER_BITRATE_TCDR_16 | - NS9750_SER_BITRATE_RCDR_16 | - ( ( ( ( CONFIG_SYS_CLK_FREQ / 8 ) / /* BBUS clock,[1] Fig. 38 */ - ( gd->baudrate * 16 ) ) - 1 ) & - NS9750_SER_BITRATE_N_MA ) ); -} - -/*********************************************************************** - * @Function: calcRxCharGapRegister - * @Return: value for the character gap timer register - * @Descr: register value depends on clock frequency and baudrate. Currently 0 - * is used as there is a bug with the gap timer in PLL bypass mode. - ***********************************************************************/ - -static unsigned int calcRxCharGapRegister( void ) -{ - return NS9750_SER_RX_CHAR_TIMER_TRUN; -} - -static struct serial_device ns9750_serial_drv = { - .name = "ns9750_serial", - .start = ns9750_serial_init, - .stop = NULL, - .setbrg = ns9750_serial_setbrg, - .putc = ns9750_serial_putc, - .puts = default_serial_puts, - .getc = ns9750_serial_getc, - .tstc = ns9750_serial_tstc, -}; - -void ns9750_serial_initialize(void) -{ - serial_register(&ns9750_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &ns9750_serial_drv; -} diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 1f8955a0fd..7922bf0669 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -164,7 +164,6 @@ serial_initfunc(altera_serial_initialize); serial_initfunc(atmel_serial_initialize); serial_initfunc(lpc32xx_serial_initialize); serial_initfunc(mcf_serial_initialize); -serial_initfunc(ns9750_serial_initialize); serial_initfunc(oc_serial_initialize); serial_initfunc(s3c64xx_serial_initialize); serial_initfunc(sandbox_serial_initialize); @@ -259,7 +258,6 @@ void serial_initialize(void) atmel_serial_initialize(); lpc32xx_serial_initialize(); mcf_serial_initialize(); - ns9750_serial_initialize(); oc_serial_initialize(); s3c64xx_serial_initialize(); sandbox_serial_initialize(); diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index bb865b7f4c..ffa3c1d693 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -40,17 +40,6 @@ #define MXSSSP_SMALL_TRANSFER 512 -/* - * CONFIG_MXS_SPI_DMA_ENABLE: Experimental mixed PIO/DMA support for MXS SPI - * host. Use with utmost caution! - * - * Enabling this is not yet recommended since this - * still doesn't support transfers to/from unaligned - * addresses. Therefore this driver will not work - * for example with saving environment. This is - * caused by DMA alignment constraints on MXS. - */ - struct mxs_spi_slave { struct spi_slave slave; uint32_t max_khz; @@ -70,7 +59,7 @@ void spi_init(void) int spi_cs_is_valid(unsigned int bus, unsigned int cs) { /* MXS SPI: 4 ports and 3 chip selects maximum */ - if (bus > 3 || cs > 2) + if (!mxs_ssp_bus_id_valid(bus) || cs > 2) return 0; else return 1; @@ -92,7 +81,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!mxs_slave) return NULL; - if (mxs_dma_init_channel(bus)) + if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus)) goto err_init; mxs_slave->slave.bus = bus; @@ -168,7 +157,12 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave, while (length--) { /* We transfer 1 byte */ +#if defined(CONFIG_MX23) + writel(SSP_CTRL0_XFER_COUNT_MASK, &ssp_regs->hw_ssp_ctrl0_clr); + writel(1, &ssp_regs->hw_ssp_ctrl0_set); +#elif defined(CONFIG_MX28) writel(1, &ssp_regs->hw_ssp_xfer_size); +#endif if ((flags & SPI_XFER_END) && !length) mxs_spi_end_xfer(ssp_regs); @@ -226,6 +220,12 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, int tl; int ret = 0; +#if defined(CONFIG_MX23) + const int mxs_spi_pio_words = 1; +#elif defined(CONFIG_MX28) + const int mxs_spi_pio_words = 4; +#endif + ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count); memset(desc, 0, sizeof(struct mxs_dma_desc) * desc_count); @@ -281,7 +281,7 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, dp->cmd.data |= ((tl & 0xffff) << MXS_DMA_DESC_BYTES_OFFSET) | - (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | + (mxs_spi_pio_words << MXS_DMA_DESC_PIO_WORDS_OFFSET) | MXS_DMA_DESC_HALT_ON_TERMINATE | MXS_DMA_DESC_TERMINATE_FLUSH; @@ -298,15 +298,19 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, } /* - * Write CTRL0, CMD0, CMD1, XFER_SIZE registers. It is + * Write CTRL0, CMD0, CMD1 and XFER_SIZE registers in + * case of MX28, write only CTRL0 in case of MX23 due + * to the difference in register layout. It is utterly * essential that the XFER_SIZE register is written on * a per-descriptor basis with the same size as is the * descriptor! */ dp->cmd.pio_words[0] = ctrl0; +#ifdef CONFIG_MX28 dp->cmd.pio_words[1] = 0; dp->cmd.pio_words[2] = 0; dp->cmd.pio_words[3] = tl; +#endif mxs_dma_desc_append(dmach, dp); @@ -332,12 +336,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, char dummy; int write = 0; char *data = NULL; - -#ifdef CONFIG_MXS_SPI_DMA_ENABLE int dma = 1; -#else - int dma = 0; -#endif if (bitlen == 0) { if (flags & SPI_XFER_END) { diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 1b20e4185c..c1ae3d9080 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -21,7 +21,6 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> -#include <asm/arch/mx6x_pins.h> #include <asm/imx-common/iomux-v3.h> #include "ehci.h" diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c index 5062af5559..f320d3eb5d 100644 --- a/drivers/usb/host/ehci-mxs.c +++ b/drivers/usb/host/ehci-mxs.c @@ -21,91 +21,107 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/regs-common.h> -#include <asm/arch/regs-base.h> -#include <asm/arch/regs-clkctrl-mx28.h> -#include <asm/arch/regs-usb.h> -#include <asm/arch/regs-usbphy.h> +#include <asm/arch/imx-regs.h> +#include <errno.h> #include "ehci.h" -#if (CONFIG_EHCI_MXS_PORT != 0) && (CONFIG_EHCI_MXS_PORT != 1) -#error "MXS EHCI: Invalid port selected!" -#endif - -#ifndef CONFIG_EHCI_MXS_PORT -#error "MXS EHCI: Please define correct port using CONFIG_EHCI_MXS_PORT!" -#endif +/* This DIGCTL register ungates clock to USB */ +#define HW_DIGCTL_CTRL 0x8001c000 +#define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2) +#define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16) -static struct ehci_mxs { - struct mxs_usb_regs *usb_regs; +struct ehci_mxs_port { + uint32_t usb_regs; struct mxs_usbphy_regs *phy_regs; -} ehci_mxs; -int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port) + struct mxs_register_32 *pll; + uint32_t pll_en_bits; + uint32_t pll_dis_bits; + uint32_t gate_bits; +}; + +static const struct ehci_mxs_port mxs_port[] = { +#ifdef CONFIG_EHCI_MXS_PORT0 + { + MXS_USBCTRL0_BASE, + (struct mxs_usbphy_regs *)MXS_USBPHY0_BASE, + (struct mxs_register_32 *)(MXS_CLKCTRL_BASE + + offsetof(struct mxs_clkctrl_regs, + hw_clkctrl_pll0ctrl0_reg)), + CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER, + CLKCTRL_PLL0CTRL0_EN_USB_CLKS, + HW_DIGCTL_CTRL_USB0_CLKGATE, + }, +#endif +#ifdef CONFIG_EHCI_MXS_PORT1 + { + MXS_USBCTRL1_BASE, + (struct mxs_usbphy_regs *)MXS_USBPHY1_BASE, + (struct mxs_register_32 *)(MXS_CLKCTRL_BASE + + offsetof(struct mxs_clkctrl_regs, + hw_clkctrl_pll1ctrl0_reg)), + CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER, + CLKCTRL_PLL1CTRL0_EN_USB_CLKS, + HW_DIGCTL_CTRL_USB1_CLKGATE, + }, +#endif +}; + +static int ehci_mxs_toggle_clock(const struct ehci_mxs_port *port, int enable) { - uint32_t usb_base, phy_base; - switch (port) { - case 0: - usb_base = MXS_USBCTRL0_BASE; - phy_base = MXS_USBPHY0_BASE; - break; - case 1: - usb_base = MXS_USBCTRL1_BASE; - phy_base = MXS_USBPHY1_BASE; - break; - default: - printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port); - return -1; + struct mxs_register_32 *digctl_ctrl = + (struct mxs_register_32 *)HW_DIGCTL_CTRL; + int pll_offset, dig_offset; + + if (enable) { + pll_offset = offsetof(struct mxs_register_32, reg_set); + dig_offset = offsetof(struct mxs_register_32, reg_clr); + writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset); + writel(port->pll_en_bits, (u32)port->pll + pll_offset); + } else { + pll_offset = offsetof(struct mxs_register_32, reg_clr); + dig_offset = offsetof(struct mxs_register_32, reg_set); + writel(port->pll_dis_bits, (u32)port->pll + pll_offset); + writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset); } - mxs_usb->usb_regs = (struct mxs_usb_regs *)usb_base; - mxs_usb->phy_regs = (struct mxs_usbphy_regs *)phy_base; return 0; } -/* This DIGCTL register ungates clock to USB */ -#define HW_DIGCTL_CTRL 0x8001c000 -#define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2) -#define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16) - int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { int ret; uint32_t usb_base, cap_base; - struct mxs_register_32 *digctl_ctrl = - (struct mxs_register_32 *)HW_DIGCTL_CTRL; - struct mxs_clkctrl_regs *clkctrl_regs = - (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + const struct ehci_mxs_port *port; - ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT); - if (ret) - return ret; + if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) { + printf("Invalid port index (index = %d)!\n", index); + return -EINVAL; + } + + port = &mxs_port[index]; /* Reset the PHY block */ - writel(USBPHY_CTRL_SFTRST, &ehci_mxs.phy_regs->hw_usbphy_ctrl_set); + writel(USBPHY_CTRL_SFTRST, &port->phy_regs->hw_usbphy_ctrl_set); udelay(10); writel(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE, - &ehci_mxs.phy_regs->hw_usbphy_ctrl_clr); + &port->phy_regs->hw_usbphy_ctrl_clr); /* Enable USB clock */ - writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER, - &clkctrl_regs->hw_clkctrl_pll0ctrl0_set); - writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER, - &clkctrl_regs->hw_clkctrl_pll1ctrl0_set); - - writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE, - &digctl_ctrl->reg_clr); + ret = ehci_mxs_toggle_clock(port, 1); + if (ret) + return ret; /* Start USB PHY */ - writel(0, &ehci_mxs.phy_regs->hw_usbphy_pwd); + writel(0, &port->phy_regs->hw_usbphy_pwd); /* Enable UTMI+ Level 2 and Level 3 compatibility */ writel(USBPHY_CTRL_ENUTMILEVEL3 | USBPHY_CTRL_ENUTMILEVEL2 | 1, - &ehci_mxs.phy_regs->hw_usbphy_ctrl_set); + &port->phy_regs->hw_usbphy_ctrl_set); - usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100; + usb_base = port->usb_regs + 0x100; *hccr = (struct ehci_hccr *)usb_base; cap_base = ehci_readl(&(*hccr)->cr_capbase); @@ -118,19 +134,19 @@ int ehci_hcd_stop(int index) { int ret; uint32_t usb_base, cap_base, tmp; - struct mxs_register_32 *digctl_ctrl = - (struct mxs_register_32 *)HW_DIGCTL_CTRL; - struct mxs_clkctrl_regs *clkctrl_regs = - (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; struct ehci_hccr *hccr; struct ehci_hcor *hcor; + const struct ehci_mxs_port *port; - ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT); - if (ret) - return ret; + if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) { + printf("Invalid port index (index = %d)!\n", index); + return -EINVAL; + } + + port = &mxs_port[index]; /* Stop the USB port */ - usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100; + usb_base = port->usb_regs + 0x100; hccr = (struct ehci_hccr *)usb_base; cap_base = ehci_readl(&hccr->cr_capbase); hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base)); @@ -144,17 +160,10 @@ int ehci_hcd_stop(int index) USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV | USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS | USBPHY_PWD_TXPWDFS; - writel(tmp, &ehci_mxs.phy_regs->hw_usbphy_pwd); + writel(tmp, &port->phy_regs->hw_usbphy_pwd); /* Disable USB clock */ - writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS, - &clkctrl_regs->hw_clkctrl_pll0ctrl0_clr); - writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS, - &clkctrl_regs->hw_clkctrl_pll1ctrl0_clr); + ret = ehci_mxs_toggle_clock(port, 0); - /* Gate off the USB clock */ - writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE, - &digctl_ctrl->reg_set); - - return 0; + return ret; } diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index a1c43f8331..554145a250 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -1,5 +1,7 @@ /* + * Copyright (c) 2011 The Chromium OS Authors. * Copyright (c) 2009-2012 NVIDIA Corporation + * Copyright (c) 2013 Lucas Stach * * See file CREDITS for list of people who contributed to this * project. @@ -21,12 +23,128 @@ */ #include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm-generic/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch-tegra/usb.h> #include <usb.h> +#include <usb/ulpi.h> +#include <libfdt.h> +#include <fdtdec.h> #include "ehci.h" -#include <asm/errno.h> -#include <asm/arch/usb.h> +#ifdef CONFIG_USB_ULPI + #ifndef CONFIG_USB_ULPI_VIEWPORT + #error "To use CONFIG_USB_ULPI on Tegra Boards you have to also \ + define CONFIG_USB_ULPI_VIEWPORT" + #endif +#endif + +enum { + USB_PORTS_MAX = 3, /* Maximum ports we allow */ +}; + +/* Parameters we need for USB */ +enum { + PARAM_DIVN, /* PLL FEEDBACK DIVIDer */ + PARAM_DIVM, /* PLL INPUT DIVIDER */ + PARAM_DIVP, /* POST DIVIDER (2^N) */ + PARAM_CPCON, /* BASE PLLC CHARGE Pump setup ctrl */ + PARAM_LFCON, /* BASE PLLC LOOP FILter setup ctrl */ + PARAM_ENABLE_DELAY_COUNT, /* PLL-U Enable Delay Count */ + PARAM_STABLE_COUNT, /* PLL-U STABLE count */ + PARAM_ACTIVE_DELAY_COUNT, /* PLL-U Active delay count */ + PARAM_XTAL_FREQ_COUNT, /* PLL-U XTAL frequency count */ + PARAM_DEBOUNCE_A_TIME, /* 10MS DELAY for BIAS_DEBOUNCE_A */ + PARAM_BIAS_TIME, /* 20US DELAY AFter bias cell op */ + + PARAM_COUNT +}; + +/* Possible port types (dual role mode) */ +enum dr_mode { + DR_MODE_NONE = 0, + DR_MODE_HOST, /* supports host operation */ + DR_MODE_DEVICE, /* supports device operation */ + DR_MODE_OTG, /* supports both */ +}; + +/* Information about a USB port */ +struct fdt_usb { + struct usb_ctlr *reg; /* address of registers in physical memory */ + unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */ + unsigned ulpi:1; /* 1 if port has external ULPI transceiver */ + unsigned enabled:1; /* 1 to enable, 0 to disable */ + unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */ + unsigned initialized:1; /* has this port already been initialized? */ + enum dr_mode dr_mode; /* dual role mode */ + enum periph_id periph_id;/* peripheral id */ + struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */ + struct fdt_gpio_state phy_reset_gpio; /* GPIO to reset ULPI phy */ +}; + +static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ +static unsigned port_count; /* Number of available ports */ + +/* + * This table has USB timing parameters for each Oscillator frequency we + * support. There are four sets of values: + * + * 1. PLLU configuration information (reference clock is osc/clk_m and + * PLLU-FOs are fixed at 12MHz/60MHz/480MHz). + * + * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz + * ---------------------------------------------------------------------- + * DIVN 960 (0x3c0) 200 (0c8) 960 (3c0h) 960 (3c0) + * DIVM 13 (0d) 4 (04) 12 (0c) 26 (1a) + * Filter frequency (MHz) 1 4.8 6 2 + * CPCON 1100b 0011b 1100b 1100b + * LFCON0 0 0 0 0 + * + * 2. PLL CONFIGURATION & PARAMETERS for different clock generators: + * + * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz + * --------------------------------------------------------------------------- + * PLLU_ENABLE_DLY_COUNT 02 (0x02) 03 (03) 02 (02) 04 (04) + * PLLU_STABLE_COUNT 51 (33) 75 (4B) 47 (2F) 102 (66) + * PLL_ACTIVE_DLY_COUNT 05 (05) 06 (06) 04 (04) 09 (09) + * XTAL_FREQ_COUNT 127 (7F) 187 (BB) 118 (76) 254 (FE) + * + * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and + * SessEnd. Each of these signals have their own debouncer and for each of + * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or + * BIAS_DEBOUNCE_B). + * + * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows: + * 0xffff -> No debouncing at all + * <n> ms = <n> *1000 / (1/19.2MHz) / 4 + * + * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have: + * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4 = 4800 = 0x12c0 + * + * We need to use only DebounceA for BOOTROM. We don't need the DebounceB + * values, so we can keep those to default. + * + * 4. The 20 microsecond delay after bias cell operation. + */ +static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { + /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */ + { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 }, + { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 }, + { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 }, + { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 } +}; + +/* UTMIP Idle Wait Delay */ +static const u8 utmip_idle_wait_delay = 17; + +/* UTMIP Elastic limit */ +static const u8 utmip_elastic_limit = 16; + +/* UTMIP High Speed Sync Start Delay */ +static const u8 utmip_hs_sync_start_delay = 9; /* * A known hardware issue where Connect Status Change bit of PORTSC register @@ -45,32 +163,428 @@ void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) *reg |= EHCI_PS_CSC; } -/* - * Create the appropriate control structures to manage - * a new EHCI host controller. - */ -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +/* Put the port into host mode */ +static void set_host_mode(struct fdt_usb *config) +{ + /* + * If we are an OTG port, check if remote host is driving VBus and + * bail out in this case. + */ + if (config->dr_mode == DR_MODE_OTG && + (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS)) + return; + + /* + * If not driving, we set the GPIO to enable VBUS. We assume + * that the pinmux is set up correctly for this. + */ + if (fdt_gpio_isvalid(&config->vbus_gpio)) { + fdtdec_setup_gpio(&config->vbus_gpio); + gpio_direction_output(config->vbus_gpio.gpio, + (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ? + 0 : 1); + debug("set_host_mode: GPIO %d %s\n", config->vbus_gpio.gpio, + (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ? + "low" : "high"); + } +} + +void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr) +{ + /* Reset the USB controller with 2us delay */ + reset_periph(config->periph_id, 2); + + /* + * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under + * base address + */ + if (config->has_legacy_mode) + setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE); + + /* Put UTMIP1/3 in reset */ + setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET); + + /* Enable the UTMIP PHY */ + if (config->utmi) + setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB); +} + +/* set up the UTMI USB controller with the parameters provided */ +static int init_utmi_usb_controller(struct fdt_usb *config) { - u32 our_hccr, our_hcor; + u32 val; + int loop_count; + const unsigned *timing; + struct usb_ctlr *usbctlr = config->reg; + + clock_enable(config->periph_id); + + /* Reset the usb controller */ + usbf_reset_controller(config, usbctlr); + + /* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */ + clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN); + + /* Follow the crystal clock disable by >100ns delay */ + udelay(1); + + /* + * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP + * mux must be switched to actually use a_sess_vld threshold. + */ + if (fdt_gpio_isvalid(&config->vbus_gpio)) { + clrsetbits_le32(&usbctlr->usb1_legacy_ctrl, + VBUS_SENSE_CTL_MASK, + VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT); + } + + /* + * PLL Delay CONFIGURATION settings. The following parameters control + * the bring up of the plls. + */ + timing = usb_pll[clock_get_osc_freq()]; + + val = readl(&usbctlr->utmip_misc_cfg1); + clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK, + timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT); + clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK, + timing[PARAM_ACTIVE_DELAY_COUNT] << + UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT); + writel(val, &usbctlr->utmip_misc_cfg1); + + /* Set PLL enable delay count and crystal frequency count */ + val = readl(&usbctlr->utmip_pll_cfg1); + clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK, + timing[PARAM_ENABLE_DELAY_COUNT] << + UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT); + clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK, + timing[PARAM_XTAL_FREQ_COUNT] << + UTMIP_XTAL_FREQ_COUNT_SHIFT); + writel(val, &usbctlr->utmip_pll_cfg1); + + /* Setting the tracking length time */ + clrsetbits_le32(&usbctlr->utmip_bias_cfg1, + UTMIP_BIAS_PDTRK_COUNT_MASK, + timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT); + + /* Program debounce time for VBUS to become valid */ + clrsetbits_le32(&usbctlr->utmip_debounce_cfg0, + UTMIP_DEBOUNCE_CFG0_MASK, + timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT); + + setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J); + + /* Disable battery charge enabling bit */ + setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG); + + clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE); + setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL); /* - * Select the first port, as we don't have a way of selecting others - * yet + * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT + * Setting these fields, together with default values of the + * other fields, results in programming the registers below as + * follows: + * UTMIP_HSRX_CFG0 = 0x9168c000 + * UTMIP_HSRX_CFG1 = 0x13 */ - if (tegrausb_start_port(index, &our_hccr, &our_hcor)) + + /* Set PLL enable delay count and Crystal frequency count */ + val = readl(&usbctlr->utmip_hsrx_cfg0); + clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK, + utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT); + clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK, + utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT); + writel(val, &usbctlr->utmip_hsrx_cfg0); + + /* Configure the UTMIP_HS_SYNC_START_DLY */ + clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1, + UTMIP_HS_SYNC_START_DLY_MASK, + utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT); + + /* Preceed the crystal clock disable by >100ns delay. */ + udelay(1); + + /* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */ + setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN); + + /* Finished the per-controller init. */ + + /* De-assert UTMIP_RESET to bring out of reset. */ + clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET); + + /* Wait for the phy clock to become valid in 100 ms */ + for (loop_count = 100000; loop_count != 0; loop_count--) { + if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID) + break; + udelay(1); + } + if (!loop_count) + return -1; + + /* Disable ICUSB FS/LS transceiver */ + clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1); + + /* Select UTMI parallel interface */ + clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, + PTS_UTMI << PTS_SHIFT); + clrbits_le32(&usbctlr->port_sc1, STS); + + /* Deassert power down state */ + clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN | + UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN); + clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN | + UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN); + + return 0; +} + +#ifdef CONFIG_USB_ULPI +/* if board file does not set a ULPI reference frequency we default to 24MHz */ +#ifndef CONFIG_ULPI_REF_CLK +#define CONFIG_ULPI_REF_CLK 24000000 +#endif + +/* set up the ULPI USB controller with the parameters provided */ +static int init_ulpi_usb_controller(struct fdt_usb *config) +{ + u32 val; + int loop_count; + struct ulpi_viewport ulpi_vp; + struct usb_ctlr *usbctlr = config->reg; + + /* set up ULPI reference clock on pllp_out4 */ + clock_enable(PERIPH_ID_DEV2_OUT); + clock_set_pllout(CLOCK_ID_PERIPH, PLL_OUT4, CONFIG_ULPI_REF_CLK); + + /* reset ULPI phy */ + if (fdt_gpio_isvalid(&config->phy_reset_gpio)) { + fdtdec_setup_gpio(&config->phy_reset_gpio); + gpio_direction_output(config->phy_reset_gpio.gpio, 0); + mdelay(5); + gpio_set_value(config->phy_reset_gpio.gpio, 1); + } + + /* Reset the usb controller */ + clock_enable(config->periph_id); + usbf_reset_controller(config, usbctlr); + + /* enable pinmux bypass */ + setbits_le32(&usbctlr->ulpi_timing_ctrl_0, + ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP); + + /* Select ULPI parallel interface */ + clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT); + + /* enable ULPI transceiver */ + setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB); + + /* configure ULPI transceiver timings */ + val = 0; + writel(val, &usbctlr->ulpi_timing_ctrl_1); + + val |= ULPI_DATA_TRIMMER_SEL(4); + val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); + val |= ULPI_DIR_TRIMMER_SEL(4); + writel(val, &usbctlr->ulpi_timing_ctrl_1); + udelay(10); + + val |= ULPI_DATA_TRIMMER_LOAD; + val |= ULPI_STPDIRNXT_TRIMMER_LOAD; + val |= ULPI_DIR_TRIMMER_LOAD; + writel(val, &usbctlr->ulpi_timing_ctrl_1); + + /* set up phy for host operation with external vbus supply */ + ulpi_vp.port_num = 0; + ulpi_vp.viewport_addr = (u32)&usbctlr->ulpi_viewport; + + if (ulpi_init(&ulpi_vp)) { + printf("Tegra ULPI viewport init failed\n"); + return -1; + } + + ulpi_set_vbus(&ulpi_vp, 1, 1); + ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 0); + + /* enable wakeup events */ + setbits_le32(&usbctlr->port_sc1, WKCN | WKDS | WKOC); + + /* Enable and wait for the phy clock to become valid in 100 ms */ + setbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR); + for (loop_count = 100000; loop_count != 0; loop_count--) { + if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID) + break; + udelay(1); + } + if (!loop_count) + return -1; + clrbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR); + + return 0; +} +#else +static int init_ulpi_usb_controller(struct fdt_usb *config) +{ + printf("No code to set up ULPI controller, please enable" + "CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT"); + return -1; +} +#endif + +static void config_clock(const u32 timing[]) +{ + clock_start_pll(CLOCK_ID_USB, + timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP], + timing[PARAM_CPCON], timing[PARAM_LFCON]); +} + +int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config) +{ + const char *phy, *mode; + + config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg"); + mode = fdt_getprop(blob, node, "dr_mode", NULL); + if (mode) { + if (0 == strcmp(mode, "host")) + config->dr_mode = DR_MODE_HOST; + else if (0 == strcmp(mode, "peripheral")) + config->dr_mode = DR_MODE_DEVICE; + else if (0 == strcmp(mode, "otg")) + config->dr_mode = DR_MODE_OTG; + else { + debug("%s: Cannot decode dr_mode '%s'\n", __func__, + mode); + return -FDT_ERR_NOTFOUND; + } + } else { + config->dr_mode = DR_MODE_HOST; + } + + phy = fdt_getprop(blob, node, "phy_type", NULL); + config->utmi = phy && 0 == strcmp("utmi", phy); + config->ulpi = phy && 0 == strcmp("ulpi", phy); + config->enabled = fdtdec_get_is_enabled(blob, node); + config->has_legacy_mode = fdtdec_get_bool(blob, node, + "nvidia,has-legacy-mode"); + config->periph_id = clock_decode_periph_id(blob, node); + if (config->periph_id == PERIPH_ID_NONE) { + debug("%s: Missing/invalid peripheral ID\n", __func__); + return -FDT_ERR_NOTFOUND; + } + fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio); + fdtdec_decode_gpio(blob, node, "nvidia,phy-reset-gpio", + &config->phy_reset_gpio); + debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, " + "vbus=%d, phy_reset=%d, dr_mode=%d\n", + config->enabled, config->has_legacy_mode, config->utmi, + config->ulpi, config->periph_id, config->vbus_gpio.gpio, + config->phy_reset_gpio.gpio, config->dr_mode); + + return 0; +} + +int board_usb_init(const void *blob) +{ + struct fdt_usb config; + enum clock_osc_freq freq; + int node_list[USB_PORTS_MAX]; + int node, count, i; + + /* Set up the USB clocks correctly based on our oscillator frequency */ + freq = clock_get_osc_freq(); + config_clock(usb_pll[freq]); + + /* count may return <0 on error */ + count = fdtdec_find_aliases_for_id(blob, "usb", + COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX); + for (i = 0; i < count; i++) { + if (port_count == USB_PORTS_MAX) { + printf("tegrausb: Cannot register more than %d ports\n", + USB_PORTS_MAX); + return -1; + } + + debug("USB %d: ", i); + node = node_list[i]; + if (!node) + continue; + if (fdt_decode_usb(blob, node, &config)) { + debug("Cannot decode USB node %s\n", + fdt_get_name(blob, node, NULL)); + return -1; + } + config.initialized = 0; + + /* add new USB port to the list of available ports */ + port[port_count++] = config; + } + + return 0; +} + +/** + * Start up the given port number (ports are numbered from 0 on each board). + * This returns values for the appropriate hccr and hcor addresses to use for + * USB EHCI operations. + * + * @param index port number to start + * @param hccr returns start address of EHCI HCCR registers + * @param hcor returns start address of EHCI HCOR registers + * @return 0 if ok, -1 on error (generally invalid port number) + */ +int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + struct fdt_usb *config; + struct usb_ctlr *usbctlr; + + if (index >= port_count) return -1; - *hccr = (struct ehci_hccr *)our_hccr; - *hcor = (struct ehci_hcor *)our_hcor; + config = &port[index]; + + /* skip init, if the port is already initialized */ + if (config->initialized) + goto success; + + if (config->utmi && init_utmi_usb_controller(config)) { + printf("tegrausb: Cannot init port %d\n", index); + return -1; + } + + if (config->ulpi && init_ulpi_usb_controller(config)) { + printf("tegrausb: Cannot init port %d\n", index); + return -1; + } + set_host_mode(config); + + config->initialized = 1; + +success: + usbctlr = config->reg; + *hccr = (struct ehci_hccr *)&usbctlr->cap_length; + *hcor = (struct ehci_hcor *)&usbctlr->usb_cmd; return 0; } /* - * Destroy the appropriate control structures corresponding - * the the EHCI host controller. + * Bring down the specified USB controller */ int ehci_hcd_stop(int index) { - return tegrausb_stop_port(index); + struct usb_ctlr *usbctlr; + + usbctlr = port[index].reg; + + /* Stop controller */ + writel(0, &usbctlr->usb_cmd); + udelay(1000); + + /* Initiate controller reset */ + writel(2, &usbctlr->usb_cmd); + udelay(1000); + + port[index].initialized = 0; + + return 0; } diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c index b1424bfd03..6efba122e7 100644 --- a/drivers/video/omap3_dss.c +++ b/drivers/video/omap3_dss.c @@ -121,7 +121,7 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg) if (!panel_cfg->frame_buffer) return; - writel(8 << GFX_FORMAT_SHIFT | GFX_ENABLE, &dispc->gfx_attributes); + writel(panel_cfg->gfx_format | GFX_ENABLE, &dispc->gfx_attributes); writel(1, &dispc->gfx_row_inc); writel(1, &dispc->gfx_pixel_inc); writel(panel_cfg->lcd_size, &dispc->gfx_size); diff --git a/dts/Makefile b/dts/Makefile index 922c78c1ca..6f36153634 100644 --- a/dts/Makefile +++ b/dts/Makefile @@ -38,7 +38,8 @@ Please define CONFIG_ARCH_DEVICE_TREE)) # We preprocess the device tree file provide a useful define DTS_CPPFLAGS := -x assembler-with-cpp \ -DARCH_CPU_DTS=\"$(SRCTREE)/arch/$(ARCH)/dts/$(CONFIG_ARCH_DEVICE_TREE).dtsi\" \ - -DBOARD_DTS=\"$(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts/$(DEVICE_TREE).dts\" + -DBOARD_DTS=\"$(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts/$(DEVICE_TREE).dts\" \ + -I$(SRCTREE)/board/$(VENDOR)/dts -I$(SRCTREE)/arch/$(ARCH)/dts all: $(obj).depend $(LIB) diff --git a/helper.mk b/helper.mk deleted file mode 100644 index 79a1da01e3..0000000000 --- a/helper.mk +++ /dev/null @@ -1,64 +0,0 @@ -# -# Copyright (C) 2012 Marek Vasut <marex@denx.de> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -######################################################################### - -## -# make_u_boot_list - Generate contents of u_boot_list section -# 1: The name of the resulting file (usually u-boot.lst) -# 2: Files to analyze for possible u_boot_list entries -# -# This function generates the contents of the u_boot_list section, -# including all the border symbols for it's subsections. The operation -# of this function is as follows, numbering goes per lines: -# -# 1) Dump the ELF header sections from all files supplied via $(2) -# 2) Filter out all other stuff that does not belong into .u_boot_list -# section. -# 3) Fix up the lines so that the resulting output is is in format -# ".u_boot_list.*". -# 4) Remove the last .something$, since that only contains the name -# of the variable to be put into a subsection. This name is irelevant -# for generation of border symbols, thus of no interest, remove it. -# 5) Take each line and for every dot "." in that line, print the whole -# line until that dot "." . This is important so that we have all -# parent border symbols generated as well. -# 6) Load every line and firstly append "\a" at the end and print the -# line. Next, append "@" at the end and print the line. Finally, -# append "~" at the end of line. This will make sense in conjunction -# with 6) and 7). -# 7) Sort the lines. It is imperative to use LC_COLLATE=C here because -# with this, the "\a" symbol is first and "~" symbol is last. Any -# other symbols fall inbetween. Symbols like "@", which marks the -# end of current line (representing current section) and ".", which -# means the line continues and thus represents subsection. -# 8) With such ordering, all lines ending with "\a" will float at the -# begining of all lines with the same prefix. Thus it is easy to -# replace "\a" with __start and make it the __start border symbol. -# Very similarly for "~", which will be always at the bottom and so -# can be replaced by "__end" and made into the __end border symbol. -# Finally, every line ending with "@" symbol will be transformed -# into " *(SORT(${line}*)); " format, which in the linker parlance -# will allow it to trap all symbols relevant to the subsection. -# -define make_u_boot_list -$(1): $(2) - $(OBJDUMP) -h $(2) | \ - sed -n -e '/.*\.u_boot_list[^ ]\+/ ! {d;n}' \ - -e 's/.*\(\.u_boot_list[^ ]\+\).*$$$$/\1/' \ - -e 's/\.[^\.]\+$$$$//' \ - -e ':s /^.\+$$$$/ { p;s/^\(.*\)\.[^\.]*$$$$/\1/;b s }' | \ - sed -n -e 'h;s/$$$$/\a/p;g;s/$$$$/@/p;g;s/$$$$/~/p;' | \ - LC_COLLATE=C sort -u | \ - sed -n -e '/\a$$$$/ { s/\./_/g;s/\a$$$$/__start = .;/p; }'\ - -e '/~$$$$/ { s/\./_/g;s/~$$$$/__end = .;/p; }'\ - -e '/@$$$$/ { s/\(.*\)@$$$$/*(SORT(\1.*));/p }' > $(1) -endef diff --git a/include/command.h b/include/command.h index 3785eb987f..65692fd2a6 100644 --- a/include/command.h +++ b/include/command.h @@ -175,7 +175,7 @@ int cmd_process(int flag, int argc, char * const argv[], _usage, _help, NULL) #define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \ - ll_entry_declare(cmd_tbl_t, _name, cmd, cmd) = \ + ll_entry_declare(cmd_tbl_t, _name, cmd) = \ U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ _usage, _help, _comp); diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index bfb9680d68..9298d0ee97 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -26,4 +26,15 @@ #define CONFIG_EXT4_WRITE #endif +/* Rather than repeat this expression each time, add a define for it */ +#if defined(CONFIG_CMD_IDE) || \ + defined(CONFIG_CMD_SATA) || \ + defined(CONFIG_CMD_SCSI) || \ + defined(CONFIG_CMD_USB) || \ + defined(CONFIG_CMD_PART) || \ + defined(CONFIG_MMC) || \ + defined(CONFIG_SYSTEMACE) +#define HAVE_BLOCK_DEVICE +#endif + #endif /* __CONFIG_FALLBACKS_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 33ee2c49d5..9eada95c04 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -35,6 +35,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM #define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -49,6 +50,7 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x80F80000\0" \ @@ -61,12 +63,38 @@ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 ro\0" \ "mmcrootfstype=ext4 rootwait\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ + "nandrootfstype=ubifs rootwait=1\0" \ + "nandsrcaddr=0x280000\0" \ + "nandimgsize=0x500000\0" \ + "rootpath=/export/rootfs\0" \ + "nfsopts=nolock\0" \ + "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ + "::off\0" \ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ "ramrootfstype=ext2\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "spiroot=/dev/mtdblock4 rw\0" \ + "spirootfstype=jffs2\0" \ + "spisrcaddr=0xe0000\0" \ + "spiimgsize=0x362000\0" \ + "spibusno=0\0" \ + "spiargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${spiroot} " \ + "rootfstype=${spirootfstype}\0" \ + "netargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ + "ip=dhcp\0" \ "bootenv=uEnv.txt\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ @@ -81,6 +109,21 @@ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \ + "bootm ${loadaddr}\0" \ + "spiboot=echo Booting from spi ...; " \ + "run spiargs; " \ + "sf probe ${spibusno}:0; " \ + "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ + "bootm ${loadaddr}\0" \ + "netboot=echo Booting from network ...; " \ + "setenv autoload no; " \ + "dhcp; " \ + "tftp ${loadaddr} ${bootfile}; " \ + "run netargs; " \ + "bootm ${loadaddr}\0" \ "ramboot=echo Booting from ramdisk ...; " \ "run ramargs; " \ "bootm ${loadaddr}\0" \ @@ -92,6 +135,8 @@ "if test $board_name = A335X_SK; then " \ "setenv fdtfile am335x-evmsk.dtb; fi\0" \ +#endif + #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ @@ -106,6 +151,8 @@ "if run loaduimage; then " \ "run mmcboot;" \ "fi;" \ + "else " \ + "run nandboot;" \ "fi;" \ /* Clock Defines */ @@ -237,9 +284,9 @@ #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000 +#define CONFIG_SPL_MUSB_NEW_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_AM33XX_BCH @@ -312,8 +359,38 @@ #ifdef CONFIG_MUSB_GADGET #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" #endif /* CONFIG_MUSB_GADGET */ +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) +/* disable host part of MUSB in SPL */ +#undef CONFIG_MUSB_HOST +/* + * Disable CPSW SPL support so we fit within the 101KiB limit. + */ +#undef CONFIG_SPL_ETH_SUPPORT +#endif + +/* + * Default to using SPI for environment, etc. We have multiple copies + * of SPL as the ROM will check these locations. + * 0x0 - 0x20000 : First copy of SPL + * 0x20000 - 0x40000 : Second copy of SPL + * 0x40000 - 0x60000 : Third copy of SPL + * 0x60000 - 0x80000 : Fourth copy of SPL + * 0x80000 - 0xDF000 : U-Boot + * 0xDF000 - 0xE0000 : U-Boot Environment + * 0xE0000 - 0x442000 : Linux Kernel + * 0x442000 - 0x800000 : Userland + */ +#if defined(CONFIG_SPI_BOOT) +# undef CONFIG_ENV_IS_NOWHERE +# define CONFIG_ENV_IS_IN_SPI_FLASH +# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ +# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ +#endif /* SPI support */ + /* Unsupported features */ #undef CONFIG_USE_IRQ @@ -346,10 +423,12 @@ /* CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#if !defined(CONFIG_SPI_BOOT) #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #endif +#endif #endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index ab4efa4b03..32421339d5 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -182,7 +182,8 @@ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS -#define CONFIG_EHCI_MXS_PORT 1 +#define CONFIG_EHCI_MXS_PORT1 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #endif diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index bf20065afd..7352113266 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -75,6 +75,9 @@ #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + /* * Memory Configuration */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index f921fac64d..ebcc69afa3 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -62,6 +62,9 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -126,6 +129,7 @@ #endif /* DataFlash */ +#ifndef CONFIG_AT91SAM9G20EK_2MMC #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH 1 #define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) @@ -133,6 +137,7 @@ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ #define AT91_SPI_CLK 15000000 +#endif #ifdef CONFIG_AT91SAM9G20EK #define DATAFLASH_TCSS (0x22 << 16) @@ -210,16 +215,16 @@ /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro," \ - "128k(env2)ro,2M(linux),-(root) " \ - "rw rootfstype=jffs2" +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock7 rw rootfstype=jffs2" #endif diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 611e3e2532..cabff9a9fe 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -212,17 +212,16 @@ /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro," \ - "128k(env2)ro,2M(linux),-(root) " \ - "rw rootfstype=jffs2" - +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock7 rw rootfstype=jffs2" #endif #define CONFIG_SYS_PROMPT "U-Boot> " diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 35038229ad..1ab9c30488 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -62,6 +62,9 @@ #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + /* * Hardware drivers */ @@ -324,15 +327,16 @@ /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \ - "rw rootfstype=jffs2" - +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock7 rw rootfstype=jffs2" #endif #define CONFIG_SYS_PROMPT "U-Boot> " diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index e988d81410..07e1c9f890 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -47,6 +47,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* general purpose I/O */ @@ -149,19 +150,19 @@ /* bootstrap + u-boot + env in nandflash */ #define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x70000000 0x100000 0x200000;" \ +#define CONFIG_BOOTCOMMAND \ + "nand read 0x70000000 0x200000 0x300000;" \ "bootm 0x70000000" #define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro,128k(env2)ro," \ - "2M@1M(linux),-(root) " \ - "rw rootfstype=jffs2" + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock7 rw rootfstype=jffs2" #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 8178b32a84..aa359b13db 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -48,6 +48,9 @@ #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + #define CONFIG_ATMEL_LEGACY #define CONFIG_AT91_GPIO 1 #define CONFIG_AT91_GPIO_PULLUP 1 diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 6fac5ac4eb..ee6e3fcdec 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -42,6 +42,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* general purpose I/O */ @@ -231,11 +232,12 @@ "root=/dev/mmcblk0p2 " \ "rw rootfstype=ext4 rootwait" #else -#define CONFIG_BOOTARGS "mem=128M console=ttyS0,115200 " \ - "mtdparts=atmel_nand:" \ - "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock1 rw " \ - "rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw" #endif #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 1616b39778..55dc83da6a 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -47,7 +47,17 @@ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_CMD_I2C -#define CONFIG_ENV_IS_NOWHERE +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* SPI */ #define CONFIG_TEGRA_SLINK diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 943b65841c..8d79ffd48a 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -331,9 +331,18 @@ #define STATUS_LED_BOOT STATUS_LED_BIT #define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */ +#define CONFIG_SPLASHIMAGE_GUARD + /* GPIO banks */ #ifdef CONFIG_STATUS_LED #define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ #endif +/* Display Configuration */ +#define CONFIG_OMAP3_GPIO_2 +#define CONFIG_VIDEO_OMAP3 +#define LCD_BPP LCD_COLOR16 + +#define CONFIG_LCD + #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h index 0e5f281b25..856c860cda 100644 --- a/include/configs/colibri_t20_iris.h +++ b/include/configs/colibri_t20_iris.h @@ -40,12 +40,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -/* File system support */ -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - /* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index ce32c8030b..b1a6e34eba 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -41,6 +41,15 @@ #define CONFIG_MACH_TYPE MACH_TYPE_DALMORE #define CONFIG_BOARD_EARLY_INIT_F + +/* I2C */ +#define CONFIG_TEGRA_I2C +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_CMD_I2C + #define CONFIG_ENV_IS_NOWHERE #define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h new file mode 100644 index 0000000000..10a493995f --- /dev/null +++ b/include/configs/dra7xx_evm.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated. + * Lokesh Vutla <lokeshvutla@ti.com> + * + * Configuration settings for the TI DRA7XX board. + * See omap5_common.h for omap5 common settings. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_DRA7XX_EVM_H +#define __CONFIG_DRA7XX_EVM_H + +#include <configs/omap5_common.h> + +#define CONFIG_DRA7XX /* in a TI DRA7XX core */ +#define CONFIG_SYS_PROMPT "DRA752 EVM # " + +#endif /* __CONFIG_DRA7XX_EVM_H */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index a8c08e8d95..90fc7c58d2 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -42,6 +42,7 @@ #define CONFIG_MACH_DAVINCI_DA850_EVM #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 8d1fd47afe..0c73f86ec1 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -56,14 +56,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* NAND support */ #define CONFIG_CMD_NAND #define CONFIG_TEGRA_NAND diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index 0e7f9247c8..559e3759de 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -36,6 +36,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/omap3.h> +#include <asm/mach-types.h> /* * Display CPU and Board information @@ -86,7 +87,10 @@ #define CONFIG_DOS_PARTITION 1 /* define to enable boot progress via leds */ +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ + (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) #define CONFIG_SHOW_BOOT_PROGRESS +#endif /* USB */ #define CONFIG_MUSB_UDC 1 @@ -118,7 +122,8 @@ #ifdef CONFIG_BOOT_NAND #define CONFIG_CMD_NAND #endif -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ + (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #endif #define CONFIG_CMD_DHCP diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 1b51fe2dc5..f2725cc87f 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -233,7 +233,9 @@ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS -#define CONFIG_EHCI_MXS_PORT 1 +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_EHCI_MXS_PORT1 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #endif @@ -244,7 +246,6 @@ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI #define CONFIG_MXS_SPI -#define CONFIG_MXS_SPI_DMA_ENABLE #define CONFIG_SPI_HALF_DUPLEX #define CONFIG_DEFAULT_SPI_BUS 2 #define CONFIG_DEFAULT_SPI_CS 0 diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index bae4ba0bb5..57a50d730c 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -66,11 +66,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - #define CONFIG_FIT #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index 7983c5d55f..03893d744d 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -19,6 +19,8 @@ #ifndef __MX23_OLINUXINO_CONFIG_H__ #define __MX23_OLINUXINO_CONFIG_H__ +#include <asm/arch/iomux-mx23.h> + /* * SoC configurations */ @@ -53,10 +55,14 @@ #define CONFIG_DOS_PARTITION #define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_GPIO +#define CONFIG_CMD_LED #define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_USB /* * Memory configurations @@ -112,6 +118,17 @@ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ /* + * Status LED + */ +#define CONFIG_STATUS_LED +#define CONFIG_GPIO_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define STATUS_LED_BOOT 0 +#define STATUS_LED_BIT MX23_PAD_SSP1_DETECT__GPIO_2_1 +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) + +/* * MMC Driver */ #ifdef CONFIG_CMD_MMC @@ -126,6 +143,22 @@ */ #define CONFIG_APBH_DMA +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + +/* Ethernet */ +#ifdef CONFIG_CMD_NET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#endif + /* * Boot Linux */ @@ -167,6 +200,7 @@ "fdt_file=imx23-olinuxino.dtb\0" \ "fdt_addr=0x41000000\0" \ "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ @@ -192,6 +226,31 @@ "fi; " \ "else " \ "bootm; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console_mainline},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "usb start; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi;" \ + "fi; " \ + "else " \ + "bootm; " \ "fi;\0" #define CONFIG_BOOTCOMMAND \ @@ -201,10 +260,9 @@ "else " \ "if run loaduimage; then " \ "run mmcboot; " \ - "else " \ - "echo ERR: Fail to boot from MMC; " \ + "else run netboot; " \ "fi; " \ "fi; " \ - "else exit; fi" + "else run netboot; fi" #endif /* __MX23_OLINUXINO_CONFIG_H__ */ diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index c44a8b8016..e5a15a451c 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -33,8 +33,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_MX23EVK #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_ARCH_MISC_INIT @@ -60,6 +58,7 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_GPIO #define CONFIG_CMD_MMC +#define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ /* Memory configurations */ @@ -112,7 +111,6 @@ #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* DMA */ #define CONFIG_APBH_DMA @@ -125,6 +123,16 @@ #define CONFIG_MXS_MMC #endif +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + /* Boot Linux */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 71447d910e..0d918a153d 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -181,7 +181,8 @@ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS -#define CONFIG_EHCI_MXS_PORT 1 +#define CONFIG_EHCI_MXS_PORT1 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #define CONFIG_USB_HOST_ETHER @@ -202,7 +203,6 @@ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI #define CONFIG_MXS_SPI -#define CONFIG_MXS_SPI_DMA_ENABLE #define CONFIG_SPI_HALF_DUPLEX #define CONFIG_DEFAULT_SPI_BUS 2 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h new file mode 100644 index 0000000000..b333937827 --- /dev/null +++ b/include/configs/mx6_common.h @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __MX6_COMMON_H +#define __MX6_COMMON_H + +#define CONFIG_ARM_ERRATA_743622 +#define CONFIG_ARM_ERRATA_751472 + +#endif diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 138e460180..bd52cde56b 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -24,6 +24,9 @@ #define CONFIG_MX6 #define CONFIG_MX6Q + +#include "mx6_common.h" + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index d76357c70f..9eda9ed91a 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -19,6 +19,9 @@ #define CONFIG_MX6 #define CONFIG_MX6Q + +#include "mx6_common.h" + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -171,6 +174,7 @@ #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 752f0981d2..5dc8255cec 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -24,6 +24,9 @@ #define CONFIG_MX6 #define CONFIG_MX6Q + +#include "mx6_common.h" + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -241,6 +244,7 @@ #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h new file mode 100644 index 0000000000..93e7fe4e62 --- /dev/null +++ b/include/configs/nitrogen6x.h @@ -0,0 +1,285 @@ +/* + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * + * Configuration settings for the Boundary Devices Nitrogen6X + * and Freescale i.MX6Q Sabre Lite boards. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_MACH_TYPE 3769 + +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE + +#define CONFIG_CMD_SF +#ifdef CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#endif + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* OCOTP Configs */ +#define CONFIG_CMD_IMXOTP +#ifdef CONFIG_CMD_IMXOTP +#define CONFIG_IMX_OTP +#define IMX_OTP_BASE OCOTP_BASE_ADDR +#define IMX_OTP_ADDR_MAX 0x7F +#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA +#define IMX_OTPWRITE_ENABLED +#endif + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#ifdef CONFIG_MX6Q +#define CONFIG_CMD_SATA +#endif + +/* + * SATA Configs + */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 6 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +/* Miscellaneous commands */ +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + +/* Framebuffer and LCD */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_IPUV3_CLK 260000000 +#define CONFIG_CMD_HDMIDETECT +#define CONFIG_CONSOLE_MUX + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_PREBOOT "" + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +#ifdef CONFIG_CMD_SATA +#define CONFIG_DRIVE_SATA "sata " +#else +#define CONFIG_DRIVE_SATA +#endif + +#ifdef CONFIG_CMD_MMC +#define CONFIG_DRIVE_MMC "mmc " +#else +#define CONFIG_DRIVE_MMC +#endif + +#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttymxc1\0" \ + "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ + "sf erase 0xc0000 0x2000 && " \ + "echo restored environment to factory default ; fi\0" \ + "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \ + "; do " \ + "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ + "for fs in fat ext2 ; do " \ + "${fs}load " \ + "${dtype} ${disk}:1 " \ + "10008000 " \ + "/6x_bootscript" \ + "&& source 10008000 ; " \ + "done ; " \ + "done ; " \ + "done; " \ + "setenv stdout serial,vga ; " \ + "echo ; echo 6x_bootscript not found ; " \ + "echo ; echo serial console at 115200, 8N1 ; echo ; " \ + "echo details at http://boundarydevices.com/6q_bootscript ; " \ + "setenv stdout serial\0" \ + "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \ + "; do " \ + "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ + "for fs in fat ext2 ; do " \ + "${fs}load ${dtype} ${disk}:1 10008000 " \ + "/6x_upgrade " \ + "&& source 10008000 ; " \ + "done ; " \ + "done ; " \ + "done\0" \ + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 1024 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE (8 * 1024) + +/* #define CONFIG_ENV_IS_IN_MMC */ +#define CONFIG_ENV_IS_IN_SPI_FLASH + +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_ENV_SECT_SIZE (8 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#endif + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#define CONFIG_SYS_DCACHE_OFF + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#define CONFIG_CMD_BMP + +#define CONFIG_CMD_TIME +#define CONFIG_SYS_ALT_MEMTEST + +#endif /* __CONFIG_H */ diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h deleted file mode 100644 index 3f49c6f0b1..0000000000 --- a/include/configs/ns9750dev.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * Markus Pietrek <mpietrek@fsforth.de> - * - * Configuation settings for the NetSilicon NS9750 DevBoard - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */ -#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */ - -#define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2) -#define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4) -#define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8) - -/*@TODO #define CONFIG_STATUS_LED*/ -#define CONFIG_USE_IRQ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NS9750_UART 1 /* use on-chip UART */ - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 /* Port B */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 3 -/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ - -#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.42.30 -#define CONFIG_SERVERIP 192.168.42.1 - -/*#define CONFIG_BOOTFILE "elinos-lart" */ -/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "NS9750DEV # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */ - -#define CONFIG_SYS_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */ - -#define CONFIG_SYS_HZ (CPU_CLK_FREQ/64) - -#define NS9750_ETH_PHY_ADDRESS (0x0000) - -/*----------------------------------------------------------------------- - * Stack sizes - */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -/* TODO */ -#define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */ -#define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */ - -#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* @TODO*/ -#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -#if 0 -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -#endif - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */ -#endif - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* @TODO */ -/*#define CONFIG_ENV_IS_IN_FLASH 1*/ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ - -#ifdef CONFIG_STATUS_LED - -extern void __led_init(led_id_t mask, int state); -extern void __led_toggle(led_id_t mask); -extern void __led_set(led_id_t mask, int state); - -#endif /* CONFIG_STATUS_LED */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 59255c4e26..48ce4c05f5 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -53,7 +53,8 @@ #define CONFIG_MISC_INIT_R -#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 07de56567d..376a3d031e 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -90,9 +90,9 @@ /* * select serial console configuration */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#define CONFIG_SERIAL1 1 /* UART1 */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ @@ -102,6 +102,10 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 +/* silent console by default */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 +#define CONFIG_SILENT_CONSOLE 1 + /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 @@ -152,19 +156,23 @@ /* Environment information */ #undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */ -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 0 +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "S" #define CONFIG_EXTRA_ENV_SETTINGS \ + "silent=true\0" \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ - "console=ttyO2,115200n8\0" \ + "console=ttyO0,115200n8\0" \ "mpurate=600\0" \ "vram=12M\0" \ "dvimode=1024x768-24@60\0" \ "defaultdisplay=dvi\0" \ - "fpgafilename=mvbluelynx_x.rbf\0" \ - "loadfpga=if fatload mmc ${mmcdev} ${loadaddr} ${fpgafilename}; then " \ - "fpga load 0 ${loadaddr} ${filesize}; " \ + "loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\ + "/lib/firmware/mvblx/${fpgafilename}; then " \ + "fpga load 0 ${loadaddr} ${filesize}; " \ "fi;\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ @@ -177,6 +185,7 @@ "omapdss.def_disp=${defaultdisplay} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype} " \ + "mvfw.fpgavers=${fpgavers} " \ "${cmdline_suffix}\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ "importbootenv=echo Importing environment from mmc ...; " \ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 180cb24f38..6ae6a0f435 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -52,7 +52,7 @@ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 - +#define CONFIG_CMD_BOOTZ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h new file mode 100644 index 0000000000..af97564011 --- /dev/null +++ b/include/configs/omap5_common.h @@ -0,0 +1,262 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated. + * Sricharan R <r.sricharan@ti.com> + * + * Derived from OMAP4 done by: + * Aneesh V <aneesh@ti.com> + * + * TI OMAP5 AND DRA7XX common configuration settings + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_OMAP5_COMMON_H +#define __CONFIG_OMAP5_COMMON_H + +/* + * High Level Configuration Options + */ +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_OMAP54XX /* which is a 54XX */ +#define CONFIG_OMAP_GPIO + +/* Get CPU defs */ +#include <asm/arch/cpu.h> +#include <asm/arch/omap.h> + +/* Display CPU and Board Info */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 19200000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + * Total Size Environment - 128k + * Malloc - add 256k + */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) +/* Vector Base */ +#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE + +/* + * Hardware drivers + */ + +/* + * serial port - NS16550 compatible + */ +#define V_NS16550_CLK 48000000 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 UART3_BASE + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +/* I2C */ +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP34XX_I2C +#define CONFIG_I2C_MULTI_BUS + + +/* MMC */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* MMC ENV related defines */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ +#define CONFIG_ENV_OFFSET 0xE0000 +#define CONFIG_CMD_SAVEENV + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Flash */ +#define CONFIG_SYS_NO_FLASH + +/* Cache */ +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_CACHELINE_SHIFT 6 + +/* commands to include */ +#include <config_cmd_default.h> + +/* Enabled commands */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_SAVEENV + +/* Disabled commands */ +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +/* + * Environment setup + */ + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyO2,115200n8\0" \ + "usbtty=cdc_acm\0" \ + "vram=16M\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "vram=${vram} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi" + +#define CONFIG_AUTO_COMPLETE 1 + +/* + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +/* + * memtest setup + */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x80000000 + +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT2_BASE +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* + * SDRAM Memory Map + * Even though we use two CS all the memory + * is mapped to one contiguous block + */ +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + +/* Defines for SDRAM init */ +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +#endif + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40300350 +#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SPL_DISPLAY_PRINT + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +/* + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 80E7FFC0--0x80E80000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80E80000 + +/* + * BSS and malloc area 64MB into memory to allow enough + * space for the kernel at the beginning of memory + */ +#define CONFIG_SPL_BSS_START_ADDR 0x84000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SPL_GPIO_SUPPORT + +#endif /* __CONFIG_OMAP5_COMMON_H */ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index 623da777fa..22a8e13f48 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -1,12 +1,10 @@ /* - * (C) Copyright 2010 + * (C) Copyright 2013 * Texas Instruments Incorporated. * Sricharan R <r.sricharan@ti.com> * - * Derived from OMAP4 done by: - * Aneesh V <aneesh@ti.com> - * * Configuration settings for the TI EVM5430 board. + * See omap5_common.h for omap5 common settings. * * See file CREDITS for list of people who contributed to this * project. @@ -27,242 +25,16 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP54XX /* which is a 54XX */ -#define CONFIG_OMAP5430 /* which is in a 5430 */ -#define CONFIG_5430EVM /* working with EVM */ -#define CONFIG_OMAP_GPIO - -/* Get CPU defs */ -#include <asm/arch/cpu.h> -#include <asm/arch/omap.h> - -/* Display CPU and Board Info */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* Clock Defines */ -#define V_OSCK 19200000 /* Clock output from T2 */ -#define V_SCLK V_OSCK - -#define CONFIG_MISC_INIT_R - -#define CONFIG_OF_LIBFDT - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Size of malloc() pool - * Total Size Environment - 128k - * Malloc - add 256k - */ -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -/* Vector Base */ -#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE - -/* - * Hardware drivers - */ - -/* - * serial port - NS16550 compatible - */ -#define V_NS16550_CLK 48000000 - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 UART3_BASE +#ifndef __CONFIG_OMAP5_EVM_H +#define __CONFIG_OMAP5_EVM_H -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -/* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C -#define CONFIG_I2C_MULTI_BUS +#include <configs/omap5_common.h> /* TWL6035 */ #ifndef CONFIG_SPL_BUILD #define CONFIG_TWL6035_POWER #endif -/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* MMC ENV related defines */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ -#define CONFIG_ENV_OFFSET 0xE0000 -#define CONFIG_CMD_SAVEENV - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Cache */ -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_CACHELINE_SHIFT 6 - -/* commands to include */ -#include <config_cmd_default.h> - -/* Enabled commands */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_SAVEENV - -/* Disabled commands */ -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ - -/* - * Environment setup - */ - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "vram=${vram} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "OMAP5430 EVM # " -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* - * memtest setup - */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/* - * SDRAM Memory Map - * Even though we use two CS all the memory - * is mapped to one contiguous block - */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -/* Defines for SDRAM init */ -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SPL_DISPLAY_PRINT - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" - -/* - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 80E7FFC0--0x80E80000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80E80000 - -/* - * BSS and malloc area 64MB into memory to allow enough - * space for the kernel at the beginning of memory - */ -#define CONFIG_SPL_BSS_START_ADDR 0x84000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#endif /* __CONFIG_H */ +#endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 2edb4aaba9..eac1ef9e02 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -44,14 +44,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index aa90ba9c5d..63ab12329b 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -234,7 +234,7 @@ #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM diff --git a/include/configs/plutux.h b/include/configs/plutux.h index deee237879..4cfe88a5e7 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -65,11 +65,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - #define CONFIG_FIT #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h index decf8d9dec..349497f67a 100644 --- a/include/configs/sc_sps_1.h +++ b/include/configs/sc_sps_1.h @@ -170,7 +170,8 @@ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS -#define CONFIG_EHCI_MXS_PORT 0 +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #endif diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index de0c777819..f66173e0f2 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -70,14 +70,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) diff --git a/include/configs/tec.h b/include/configs/tec.h index caeb9cd8a8..f90f5c7526 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -73,11 +73,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - #define CONFIG_FIT #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 88acccf56d..036ded0c79 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef __TEGRA_COMMON_H -#define __TEGRA_COMMON_H +#ifndef _TEGRA_COMMON_H_ +#define _TEGRA_COMMON_H_ #include <asm/sizes.h> #include <linux/stringify.h> @@ -56,10 +56,8 @@ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ /* - * PllX Configuration + * NS16550 Configuration */ -#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */ - #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) @@ -90,6 +88,18 @@ #define CONFIG_COMMAND_HISTORY #define CONFIG_AUTO_COMPLETE +/* turn on commonly used storage-related commands */ + +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_PART + #define CONFIG_SYS_NO_FLASH #define CONFIG_CONSOLE_MUX @@ -158,5 +168,7 @@ #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SYS_GENERIC_BOARD +/* Misc utility code */ +#define CONFIG_BOUNCE_BUFFER #endif /* _TEGRA_COMMON_H_ */ diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 003353040e..c2986d8309 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -76,4 +76,7 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds" +/* Total I2C ports on Tegra114 */ +#define TEGRA_I2C_NUM_CONTROLLERS 5 + #endif /* _TEGRA114_COMMON_H_ */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 33e5f524f1..e464e06173 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -26,6 +26,12 @@ #include "tegra-common.h" /* + * Errata configuration + */ +#define CONFIG_ARM_ERRATA_742230 +#define CONFIG_ARM_ERRATA_751472 + +/* * NS16550 Configuration */ #define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */ @@ -108,13 +114,7 @@ /* Total I2C ports on Tegra20 */ #define TEGRA_I2C_NUM_CONTROLLERS 4 -#define CONFIG_PARTITION_UUIDS -#define CONFIG_CMD_PART - #define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_NAND_ONFI_DETECTION -/* Misc utility code */ -#define CONFIG_BOUNCE_BUFFER - #endif /* _TEGRA20_COMMON_H_ */ diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index 04517e1409..f6c07c6ecc 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -26,6 +26,12 @@ #include "tegra-common.h" /* + * Errata configuration + */ +#define CONFIG_ARM_ERRATA_743622 +#define CONFIG_ARM_ERRATA_751472 + +/* * NS16550 Configuration */ #define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index 334d3a3b8b..0644f7a5b8 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -67,14 +67,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* Environment in SPI */ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_MAX_HZ 48000000 diff --git a/include/configs/ventana.h b/include/configs/ventana.h index b55ebc9bfc..5755f11714 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -50,14 +50,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 1e554d8164..9542c7e213 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -59,14 +59,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes * the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 18fd76f47e..2989e723e0 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -58,6 +58,11 @@ #define CONFIG_ZYNQ_GEM #define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000 +#if defined(CONFIG_ZYNQ_DCC) +# define CONFIG_ARM_DCC +# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ +#endif + #define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY diff --git a/include/env_callback.h b/include/env_callback.h index c583120c1c..e89b6dadc9 100644 --- a/include/env_callback.h +++ b/include/env_callback.h @@ -41,6 +41,12 @@ #define SILENT_CALLBACK #endif +#ifdef CONFIG_SPLASHIMAGE_GUARD +#define SPLASHIMAGE_CALLBACK "splashimage:splashimage," +#else +#define SPLASHIMAGE_CALLBACK +#endif + /* * This list of callback bindings is static, but may be overridden by defining * a new association in the ".callbacks" environment variable. @@ -51,6 +57,7 @@ "bootfile:bootfile," \ "loadaddr:loadaddr," \ SILENT_CALLBACK \ + SPLASHIMAGE_CALLBACK \ "stdin:console,stdout:console,stderr:console," \ CONFIG_ENV_CALLBACK_LIST_STATIC @@ -76,7 +83,7 @@ void env_callback_init(ENTRY *var_entry); } #else #define U_BOOT_ENV_CALLBACK(name, callback) \ - ll_entry_declare(struct env_clbk_tbl, name, env_clbk, env_clbk) = \ + ll_entry_declare(struct env_clbk_tbl, name, env_clbk) = \ {#name, callback} #endif diff --git a/include/fdtdec.h b/include/fdtdec.h index 77f244f417..21894835d1 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -62,6 +62,7 @@ struct fdt_memory { enum fdt_compat_id { COMPAT_UNKNOWN, COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */ + COMPAT_NVIDIA_TEGRA114_I2C, /* Tegra114 I2C w/single clock source */ COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */ COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */ COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */ @@ -70,6 +71,8 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */ COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */ COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */ + COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */ + COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */ COMPAT_NVIDIA_TEGRA20_SFLASH, /* Tegra 2 SPI flash controller */ COMPAT_NVIDIA_TEGRA20_SLINK, /* Tegra 2 SPI SLINK controller */ COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */ diff --git a/include/lcd.h b/include/lcd.h index c24164a9de..4ac4ddd1e0 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -47,6 +47,7 @@ extern struct vidinfo panel_info; extern void lcd_ctrl_init (void *lcdbase); extern void lcd_enable (void); +extern int board_splash_screen_prepare(void); /* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */ extern void lcd_setcolreg (ushort regno, diff --git a/include/linker_lists.h b/include/linker_lists.h index 0b405d78ea..6c28bf961b 100644 --- a/include/linker_lists.h +++ b/include/linker_lists.h @@ -13,6 +13,96 @@ * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. */ + +/* + * There is no use in including this from ASM files, but that happens + * anyway, e.g. PPC kgdb.S includes command.h which incluse us. + * So just don't define anything when included from ASM. + */ + +#if !defined(__ASSEMBLY__) + +/** + * A linker list is constructed by grouping together linker input + * sections, each containning one entry of the list. Each input section + * contains a constant initialized variable which holds the entry's + * content. Linker list input sections are constructed from the list + * and entry names, plus a prefix which allows grouping all lists + * together. Assuming _list and _entry are the list and entry names, + * then the corresponding input section name is + * + * _u_boot_list + _2_ + @_list + _2_ + @_entry + * + * and the C variable name is + * + * .u_boot_list_ + 2_ + @_list + _2_ + @_entry + * + * This ensures uniqueness for both input section and C variable name. + * + * Note that the names differ only in the first character, "." for the + * setion and "_" for the variable, so that the linker cannot confuse + * section and symbol names. From now on, both names will be referred + * to as + * + * %u_boot_list_ + 2_ + @_list + _2_ + @_entry + * + * Entry variables need never be referred to directly. + * + * The naming scheme for input sections allows grouping all linker lists + * into a single linker output section and grouping all entries for a + * single list. + * + * Note the two '_2_' constant components in the names: their presence + * allows putting a start and end symbols around a list, by mapping + * these symbols to sections names with components "1" (before) and + * "3" (after) instead of "2" (within). + * Start and end symbols for a list can generally be defined as + * + * %u_boot_list_2_ + @_list + _1_... + * %u_boot_list_2_ + @_list + _3_... + * + * Start and end symbols for the whole of the linker lists area can be + * defined as + * + * %u_boot_list_1_... + * %u_boot_list_3_... + * + * Here is an example of the sorted sections which result from a list + * "array" made up of three entries : "first", "second" and "third", + * iterated at least once. + * + * .u_boot_list_2_array_1 + * .u_boot_list_2_array_2_first + * .u_boot_list_2_array_2_second + * .u_boot_list_2_array_2_third + * .u_boot_list_2_array_3 + * + * If lists must be divided into sublists (e.g. for iterating only on + * part of a list), one can simply give the list a name of the form + * 'outer_2_inner', where 'outer' is the global list name and 'inner' + * is the sub-list name. Iterators for the whole list should use the + * global list name ("outer"); iterators for only a sub-list should use + * the full sub-list name ("outer_2_inner"). + * + * Here is an example of the sections generated from a global list + * named "drivers", two sub-lists named "i2c" and "pci", and iterators + * defined for the whole list and each sub-list: + * + * %u_boot_list_2_drivers_1 + * %u_boot_list_2_drivers_2_i2c_1 + * %u_boot_list_2_drivers_2_i2c_2_first + * %u_boot_list_2_drivers_2_i2c_2_first + * %u_boot_list_2_drivers_2_i2c_2_second + * %u_boot_list_2_drivers_2_i2c_2_third + * %u_boot_list_2_drivers_2_i2c_3 + * %u_boot_list_2_drivers_2_pci_1 + * %u_boot_list_2_drivers_2_pci_2_first + * %u_boot_list_2_drivers_2_pci_2_second + * %u_boot_list_2_drivers_2_pci_2_third + * %u_boot_list_2_drivers_2_pci_3 + * %u_boot_list_2_drivers_3 + */ + #ifndef __LINKER_LISTS_H__ #define __LINKER_LISTS_H__ @@ -20,43 +110,28 @@ * ll_entry_declare() - Declare linker-generated array entry * @_type: Data type of the entry * @_name: Name of the entry - * @_section_u: Subsection of u_boot_list in which this entry is placed - * (with underscores instead of dots, for name concatenation) - * @_section_d: Subsection of u_boot_list in which this entry is placed - * (with dots, for section concatenation) + * @_list: name of the list. Should contain only characters allowed + * in a C variable name! * * This macro declares a variable that is placed into a linker-generated * array. This is a basic building block for more advanced use of linker- * generated arrays. The user is expected to build their own macro wrapper * around this one. * - * A variable declared using this macro must be compile-time initialized - * and is as such placed into subsection of special section, .u_boot_list. - * The subsection is specified by the _section_[u,d] parameter, see below. - * The base name of the variable is _name, yet the actual variable is - * declared as concatenation of - * - * %_u_boot_list_ + @_section_u + _ + @_name - * - * which ensures name uniqueness. This variable shall never be refered - * directly though. + * A variable declared using this macro must be compile-time initialized. * * Special precaution must be made when using this macro: - * 1) The _type must not contain the "static" keyword, otherwise the entry - * is not generated. * - * 2) The @_section_u and @_section_d variables must match, the only difference - * is that in @_section_u is every dot "." character present in @_section_d - * replaced by a single underscore "_" character in @_section_u. The actual - * purpose of these parameters is to select proper subsection in the global - * .u_boot_list section. + * 1) The _type must not contain the "static" keyword, otherwise the + * entry is generated and can be iterated but is listed in the map + * file and cannot be retrieved by name. * - * 3) In case a section is declared that contains some array elements AND a - * subsection of this section is declared and contains some elements, it is - * imperative that the elements are of the same type. + * 2) In case a section is declared that contains some array elements AND + * a subsection of this section is declared and contains some elements, + * it is imperative that the elements are of the same type. * * 4) In case an outer section is declared that contains some array elements - * AND am inner subsection of this section is declared and contains some + * AND an inner subsection of this section is declared and contains some * elements, then when traversing the outer section, even the elements of * the inner sections are present in the array. * @@ -66,39 +141,71 @@ * .y = 4, * }; */ -#define ll_entry_declare(_type, _name, _section_u, _section_d) \ - _type _u_boot_list_##_section_u##_##_name __attribute__(( \ - unused, aligned(4), \ - section(".u_boot_list."#_section_d"."#_name))) +#define ll_entry_declare(_type, _name, _list) \ + _type _u_boot_list_2_##_list##_2_##_name __aligned(4) \ + __attribute__((unused, \ + section(".u_boot_list_2_"#_list"_2_"#_name))) + +/** + * We need a 0-byte-size type for iterator symbols, and the compiler + * does not allow defining objects of C type 'void'. Using an empty + * struct is allowed by the compiler, but causes gcc versions 4.4 and + * below to complain about aliasing. Therefore we use the next best + * thing: zero-sized arrays, which are both 0-byte-size and exempt from + * aliasing warnings. + */ /** * ll_entry_start() - Point to first entry of linker-generated array * @_type: Data type of the entry - * @_section_u: Subsection of u_boot_list in which this entry is placed - * (with underscores instead of dots) + * @_list: Name of the list in which this entry is placed * * This function returns (_type *) pointer to the very first entry of a * linker-generated array placed into subsection of .u_boot_list section - * specified by _section_u argument. + * specified by _list argument. + * + * Since this macro defines an array start symbol, its leftmost index + * must be 2 and its rightmost index must be 1. * * Example: * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub); */ -#define ll_entry_start(_type, _section_u) \ - ({ \ - extern _type _u_boot_list_##_section_u##__start; \ - _type *_ll_result = &_u_boot_list_##_section_u##__start;\ - _ll_result; \ - }) +#define ll_entry_start(_type, _list) \ +({ \ + static char start[0] __aligned(4) __attribute__((unused, \ + section(".u_boot_list_2_"#_list"_1"))); \ + (_type *)&start; \ +}) /** - * ll_entry_count() - Return the number of elements in linker-generated array + * ll_entry_end() - Point after last entry of linker-generated array * @_type: Data type of the entry - * @_section_u: Subsection of u_boot_list in which this entry is placed + * @_list: Name of the list in which this entry is placed * (with underscores instead of dots) * + * This function returns (_type *) pointer after the very last entry of + * a linker-generated array placed into subsection of .u_boot_list + * section specified by _list argument. + * + * Since this macro defines an array end symbol, its leftmost index + * must be 2 and its rightmost index must be 3. + * + * Example: + * struct my_sub_cmd *msc = ll_entry_end(struct my_sub_cmd, cmd_sub); + */ +#define ll_entry_end(_type, _list) \ +({ \ + static char end[0] __aligned(4) __attribute__((unused, \ + section(".u_boot_list_2_"#_list"_3"))); \ + (_type *)&end; \ +}) +/** + * ll_entry_count() - Return the number of elements in linker-generated array + * @_type: Data type of the entry + * @_list: Name of the list of which the number of elements is computed + * * This function returns the number of elements of a linker-generated array - * placed into subsection of .u_boot_list section specified by _section_u + * placed into subsection of .u_boot_list section specified by _list * argument. The result is of an unsigned int type. * * Example: @@ -108,23 +215,19 @@ * for (i = 0; i < count; i++, msc++) * printf("Entry %i, x=%i y=%i\n", i, msc->x, msc->y); */ -#define ll_entry_count(_type, _section_u) \ +#define ll_entry_count(_type, _list) \ ({ \ - extern _type _u_boot_list_##_section_u##__start; \ - extern _type _u_boot_list_##_section_u##__end; \ - unsigned int _ll_result = \ - &_u_boot_list_##_section_u##__end - \ - &_u_boot_list_##_section_u##__start; \ + _type *start = ll_entry_start(_type, _list); \ + _type *end = ll_entry_end(_type, _list); \ + unsigned int _ll_result = end - start; \ _ll_result; \ }) - /** * ll_entry_get() - Retrieve entry from linker-generated array by name * @_type: Data type of the entry * @_name: Name of the entry - * @_section_u: Subsection of u_boot_list in which this entry is placed - * (with underscores instead of dots) + * @_list: Name of the list in which this entry is placed * * This function returns a pointer to a particular entry in LG-array * identified by the subsection of u_boot_list where the entry resides @@ -138,11 +241,54 @@ * ... * struct my_sub_cmd *c = ll_entry_get(struct my_sub_cmd, my_sub_cmd, cmd_sub); */ -#define ll_entry_get(_type, _name, _section_u) \ +#define ll_entry_get(_type, _name, _list) \ ({ \ - extern _type _u_boot_list_##_section_u##_##_name; \ - _type *_ll_result = &_u_boot_list_##_section_u##_##_name;\ + extern _type _u_boot_list_2_##_list##_2_##_name; \ + _type *_ll_result = \ + &_u_boot_list_2_##_list##_2_##_name; \ _ll_result; \ }) +/** + * ll_start() - Point to first entry of first linker-generated array + * @_type: Data type of the entry + * + * This function returns (_type *) pointer to the very first entry of + * the very first linker-generated array. + * + * Since this macro defines the start of the linker-generated arrays, + * its leftmost index must be 1. + * + * Example: + * struct my_sub_cmd *msc = ll_start(struct my_sub_cmd); + */ +#define ll_start(_type) \ +({ \ + static char start[0] __aligned(4) __attribute__((unused, \ + section(".u_boot_list_1"))); \ + (_type *)&start; \ +}) + +/** + * ll_entry_end() - Point after last entry of last linker-generated array + * @_type: Data type of the entry + * + * This function returns (_type *) pointer after the very last entry of + * the very last linker-generated array. + * + * Since this macro defines the end of the linker-generated arrays, + * its leftmost index must be 3. + * + * Example: + * struct my_sub_cmd *msc = ll_end(struct my_sub_cmd); + */ +#define ll_end(_type) \ +({ \ + static char end[0] __aligned(4) __attribute__((unused, \ + section(".u_boot_list_3"))); \ + (_type *)&end; \ +}) + +#endif /* __ASSEMBLY__ */ + #endif /* __LINKER_LISTS_H__ */ diff --git a/include/mmc.h b/include/mmc.h index a13e2bdcf1..de6d497d53 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -259,6 +259,7 @@ struct mmc { void (*set_ios)(struct mmc *mmc); int (*init)(struct mmc *mmc); int (*getcd)(struct mmc *mmc); + int (*getwp)(struct mmc *mmc); uint b_max; }; @@ -274,6 +275,7 @@ int get_mmc_num(void); int board_mmc_getcd(struct mmc *mmc); int mmc_switch_part(int dev_num, unsigned int part_num); int mmc_getcd(struct mmc *mmc); +int mmc_getwp(struct mmc *mmc); void spl_mmc_load(void) __noreturn; #ifdef CONFIG_GENERIC_MMC diff --git a/include/ns9750_bbus.h b/include/ns9750_bbus.h deleted file mode 100644 index 9485338f73..0000000000 --- a/include/ns9750_bbus.h +++ /dev/null @@ -1,125 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_bbus.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for BBus usage - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 10 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * - ***********************************************************************/ - -#ifndef FS_NS9750_BBUS_H -#define FS_NS9750_BBUS_H - -#define NS9750_BBUS_MODULE_BASE (0x90600000) - -#define get_bbus_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_BBUS_MODULE_BASE+(unsigned int) (c))) - -/* We have support for 50 GPIO pins */ - -#define get_gpio_cfg_reg_addr(pin) \ - get_bbus_reg_addr( NS9750_BBUS_GPIO_CFG_BASE + (((pin) >> 3) * 4) ) - -/* To Read/Modify/Write a pin configuration register, use it like - set_gpio_cfg_reg_val( 12, NS9750_GPIO_CFG_FUNC_GPIO|NS9750_GPIO_CFG_OUTPUT ); - They should be wrapped by cli()/sti() */ -#define set_gpio_cfg_reg_val(pin,cfg) \ - *get_gpio_cfg_reg_addr(pin)=(*get_gpio_cfg_reg_addr((pin)) & \ - ~NS9750_GPIO_CFG_MASK((pin))) |\ - NS9750_GPIO_CFG_VAL((pin),(cfg)); - -#define NS9750_GPIO_CFG_MASK(pin) (NS9750_GPIO_CFG_VAL(pin, \ - NS9750_GPIO_CFG_MA)) -#define NS9750_GPIO_CFG_VAL(pin,cfg) ((cfg) << (((pin) % 8) * 4)) - -#define NS9750_GPIO_CFG_MA (0x0F) -#define NS9750_GPIO_CFG_INPUT (0x00) -#define NS9750_GPIO_CFG_OUTPUT (0x08) -#define NS9750_GPIO_CFG_FUNC_GPIO (0x03) -#define NS9750_GPIO_CFG_FUNC_2 (0x02) -#define NS9750_GPIO_CFG_FUNC_1 (0x01) -#define NS9750_GPIO_CFG_FUNC_0 (0x00) - -/* the register addresses */ - -#define NS9750_BBUS_MASTER_RESET (0x00) -#define NS9750_BBUS_GPIO_CFG_BASE (0x10) -#define NS9750_BBUS_GPIO_CTRL_BASE (0x30) -#define NS9750_BBUS_GPIO_STAT_BASE (0x40) -#define NS9750_BBUS_MONITOR (0x50) -#define NS9750_BBUS_DMA_INT_STAT (0x60) -#define NS9750_BBUS_DMA_INT_ENABLE (0x64) -#define NS9750_BBUS_USB_CFG (0x70) -#define NS9750_BBUS_ENDIAN_CFG (0x80) -#define NS9750_BBUS_ARM_WAKE_UP (0x90) - -/* register bit fields */ - -#define NS9750_BBUS_MASTER_RESET_UTIL (0x00000100) -#define NS9750_BBUS_MASTER_RESET_I2C (0x00000080) -#define NS9750_BBUS_MASTER_RESET_1284 (0x00000040) -#define NS9750_BBUS_MASTER_RESET_SER4 (0x00000020) -#define NS9750_BBUS_MASTER_RESET_SER3 (0x00000010) -#define NS9750_BBUS_MASTER_RESET_SER2 (0x00000008) -#define NS9750_BBUS_MASTER_RESET_SER1 (0x00000004) -#define NS9750_BBUS_MASTER_RESET_USB (0x00000002) -#define NS9750_BBUS_MASTER_RESET_DMA (0x00000001) - -/* BS9750_BBUS_DMA_INT_BINT* are valid for *DMA_INT_STAT and *DMA_INT_ENABLE */ - -#define NS9750_BBUS_DMA_INT_BINT16 (0x00010000) -#define NS9750_BBUS_DMA_INT_BINT15 (0x00008000) -#define NS9750_BBUS_DMA_INT_BINT14 (0x00004000) -#define NS9750_BBUS_DMA_INT_BINT13 (0x00002000) -#define NS9750_BBUS_DMA_INT_BINT12 (0x00001000) -#define NS9750_BBUS_DMA_INT_BINT11 (0x00000800) -#define NS9750_BBUS_DMA_INT_BINT10 (0x00000400) -#define NS9750_BBUS_DMA_INT_BINT9 (0x00000200) -#define NS9750_BBUS_DMA_INT_BINT8 (0x00000100) -#define NS9750_BBUS_DMA_INT_BINT7 (0x00000080) -#define NS9750_BBUS_DMA_INT_BINT6 (0x00000040) -#define NS9750_BBUS_DMA_INT_BINT5 (0x00000020) -#define NS9750_BBUS_DMA_INT_BINT4 (0x00000010) -#define NS9750_BBUS_DMA_INT_BINT3 (0x00000008) -#define NS9750_BBUS_DMA_INT_BINT2 (0x00000004) -#define NS9750_BBUS_DMA_INT_BINT1 (0x00000002) -#define NS9750_BBUS_DMA_INT_BINT0 (0x00000001) - -#define NS9750_BBUS_USB_CFG_OUTEN (0x00000008) -#define NS9750_BBUS_USB_CFG_SPEED (0x00000004) -#define NS9750_BBUS_USB_CFG_CFG_MA (0x00000003) -#define NS9750_BBUS_USB_CFG_CFG_HOST_SOFT (0x00000003) -#define NS9750_BBUS_USB_CFG_CFG_DEVICE (0x00000002) -#define NS9750_BBUS_USB_CFG_CFG_HOST (0x00000001) -#define NS9750_BBUS_USB_CFG_CFG_DIS (0x00000000) - -#define NS9750_BBUS_ENDIAN_CFG_AHBM (0x00001000) -#define NS9750_BBUS_ENDIAN_CFG_I2C (0x00000080) -#define NS9750_BBUS_ENDIAN_CFG_IEEE1284 (0x00000040) -#define NS9750_BBUS_ENDIAN_CFG_SER4 (0x00000020) -#define NS9750_BBUS_ENDIAN_CFG_SER3 (0x00000010) -#define NS9750_BBUS_ENDIAN_CFG_SER2 (0x00000008) -#define NS9750_BBUS_ENDIAN_CFG_SER1 (0x00000004) -#define NS9750_BBUS_ENDIAN_CFG_USB (0x00000002) -#define NS9750_BBUS_ENDIAN_CFG_DMA (0x00000001) - -#endif /* FS_NS9750_BBUS_H */ diff --git a/include/ns9750_mem.h b/include/ns9750_mem.h deleted file mode 100644 index 666e4127c8..0000000000 --- a/include/ns9750_mem.h +++ /dev/null @@ -1,172 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_mem.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for Memory Control Module - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 5 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifndef FS_NS9750_MEM_H -#define FS_NS9750_SYS_H - -#define NS9750_MEM_MODULE_BASE (0xA0700000) - -#define get_mem_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_MEM_MODULE_BASE+(unsigned int) (c))) - -/* the register addresses */ - -#define NS9750_MEM_CTRL (0x0000) -#define NS9750_MEM_STATUS (0x0004) -#define NS9750_MEM_CFG (0x0008) -#define NS9750_MEM_DYN_CTRL (0x0020) -#define NS9750_MEM_DYN_REFRESH (0x0024) -#define NS9750_MEM_DYN_READ_CFG (0x0028) -#define NS9750_MEM_DYN_TRP (0x0030) -#define NS9750_MEM_DYN_TRAS (0x0034) -#define NS9750_MEM_DYN_TSREX (0x0038) -#define NS9750_MEM_DYN_TAPR (0x003C) -#define NS9750_MEM_DYN_TDAL (0x0040) -#define NS9750_MEM_DYN_TWR (0x0044) -#define NS9750_MEM_DYN_TRC (0x0048) -#define NS9750_MEM_DYN_TRFC (0x004C) -#define NS9750_MEM_DYN_TXSR (0x0050) -#define NS9750_MEM_DYN_TRRD (0x0054) -#define NS9750_MEM_DYN_TMRD (0x0058) -#define NS9750_MEM_STAT_EXT_WAIT (0x0080) -#define NS9750_MEM_DYN_CFG_BASE (0x0100) -#define NS9750_MEM_DYN_RAS_CAS_BASE (0x0104) -#define NS9750_MEM_STAT_CFG_BASE (0x0200) -#define NS9750_MEM_STAT_WAIT_WEN_BASE (0x0204) -#define NS9750_MEM_STAT_WAIT_OEN_BASE (0x0208) -#define NS9750_MEM_STAT_WAIT_RD_BASE (0x020C) -#define NS9750_MEM_STAT_WAIT_PAGE_BASE (0x0210) -#define NS9750_MEM_STAT_WAIR_WR_BASE (0x0214) -#define NS9750_MEM_STAT_WAIT_TURN_BASE (0x0218) - -/* the vectored register addresses */ - -#define NS9750_MEM_DYN_CFG(c) (NS9750_MEM_DYN_CFG_BASE + (c)*0x20) -#define NS9750_MEM_DYN_RAS_CAS(c) (NS9750_MEM_DYN_RAS_CAS_BASE + (c)*0x20) -#define NS9750_MEM_STAT_CFG(c) (NS9750_MEM_STAT_CFG_BASE + (c)*0x20) -#define NS9750_MEM_STAT_WAIT_WEN(c) (NS9750_MEM_STAT_WAIT_WEN_BASE+(c)*0x20) -#define NS9750_MEM_STAT_WAIT_OEN(c) (NS9750_MEM_STAT_WAIT_OEN_BASE+(c)*0x20) -#define NS9750_MEM_STAT_RD(c) (NS9750_MEM_STAT_WAIT_RD_BASE+(c)*0x20) -#define NS9750_MEM_STAT_PAGE(c) (NS9750_MEM_STAT_WAIT_PAGE_BASE+(c)*0x20) -#define NS9750_MEM_STAT_WR(c) (NS9750_MEM_STAT_WAIT_WR_BASE+(c)*0x20) -#define NS9750_MEM_STAT_TURN(c) (NS9750_MEM_STAT_WAIT_TURN_BASE+(c)*0x20) - -/* register bit fields */ - -#define NS9750_MEM_CTRL_L (0x00000004) -#define NS9750_MEM_CTRL_M (0x00000002) -#define NS9750_MEM_CTRL_E (0x00000001) - -#define NS9750_MEM_STAT_SA (0x00000004) -#define NS9750_MEM_STAT_S (0x00000002) -#define NS9750_MEM_STAT_B (0x00000001) - -#define NS9750_MEM_CFG_CLK (0x00000010) -#define NS9750_MEM_CFG_N (0x00000001) - -#define NS9750_MEM_DYN_CTRL_NRP (0x00004000) -#define NS9750_MEM_DYN_CTRL_DP (0x00002000) -#define NS9750_MEM_DYN_CTRL_I_MA (0x00000180) -#define NS9750_MEM_DYN_CTRL_I_NORMAL (0x00000000) -#define NS9750_MEM_DYN_CTRL_I_MODE (0x00000080) -#define NS9750_MEM_DYN_CTRL_I_PALL (0x00000100) -#define NS9750_MEM_DYN_CTRL_I_NOP (0x00000180) -#define NS9750_MEM_DYN_CTRL_SR (0x00000002) -#define NS9750_MEM_DYN_CTRL_CE (0x00000001) - - -#define NS9750_MEM_DYN_REFRESH_MA (0x000007FF) - -#define NS9750_MEM_DYN_READ_CFG_MA (0x00000003) -#define NS9750_MEM_DYN_READ_CFG_DELAY0 (0x00000001) -#define NS9750_MEM_DYN_READ_CFG_DELAY1 (0x00000002) -#define NS9750_MEM_DYN_READ_CFG_DELAY2 (0x00000003) - -#define NS9750_MEM_DYN_TRP_MA (0x0000000F) - -#define NS9750_MEM_DYN_TRAS_MA (0x0000000F) - -#define NS9750_MEM_DYN_TSREX_MA (0x0000000F) - -#define NS9750_MEM_DYN_TAPR_MA (0x0000000F) - -#define NS9750_MEM_DYN_TDAL_MA (0x0000000F) - -#define NS9750_MEM_DYN_TWR_MA (0x0000000F) - -#define NS9750_MEM_DYN_TRC_MA (0x0000001F) - -#define NS9750_MEM_DYN_TRFC_MA (0x0000001F) - -#define NS9750_MEM_DYN_TXSR_MA (0x0000001F) - -#define NS9750_MEM_DYN_TRRD_MA (0x0000000F) - -#define NS9750_MEM_DYN_TMRD_MA (0x0000000F) - -#define NS9750_MEM_STAT_EXTW_WAIT_MA (0x0000003F) - -#define NS9750_MEM_DYN_CFG_P (0x00100000) -#define NS9750_MEM_DYN_CFG_BDMC (0x00080000) -#define NS9750_MEM_DYN_CFG_AM (0x00004000) -#define NS9750_MEM_DYN_CFG_AM_MA (0x00001F80) -#define NS9750_MEM_DYN_CFG_MD (0x00000018) - -#define NS9750_MEM_DYN_RAS_CAS_CAS_MA (0x00000300) -#define NS9750_MEM_DYN_RAS_CAS_CAS_1 (0x00000100) -#define NS9750_MEM_DYN_RAS_CAS_CAS_2 (0x00000200) -#define NS9750_MEM_DYN_RAS_CAS_CAS_3 (0x00000300) -#define NS9750_MEM_DYN_RAS_CAS_RAS_MA (0x00000003) -#define NS9750_MEM_DYN_RAS_CAS_RAS_1 (0x00000001) -#define NS9750_MEM_DYN_RAS_CAS_RAS_2 (0x00000002) -#define NS9750_MEM_DYN_RAS_CAS_RAS_3 (0x00000003) - -#define NS9750_MEM_STAT_CFG_PSMC (0x00100000) -#define NS9750_MEM_STAT_CFG_BSMC (0x00080000) -#define NS9750_MEM_STAT_CFG_EW (0x00000100) -#define NS9750_MEM_STAT_CFG_PB (0x00000080) -#define NS9750_MEM_STAT_CFG_PC (0x00000040) -#define NS9750_MEM_STAT_CFG_PM (0x00000008) -#define NS9750_MEM_STAT_CFG_MW_MA (0x00000003) -#define NS9750_MEM_STAT_CFG_MW_8 (0x00000000) -#define NS9750_MEM_STAT_CFG_MW_16 (0x00000001) -#define NS9750_MEM_STAT_CFG_MW_32 (0x00000002) - -#define NS9750_MEM_STAT_WAIT_WEN_MA (0x0000000F) - -#define NS9750_MEM_STAT_WAIT_OEN_MA (0x0000000F) - -#define NS9750_MEM_STAT_WAIT_RD_MA (0x0000001F) - -#define NS9750_MEM_STAT_WAIT_PAGE_MA (0x0000001F) - -#define NS9750_MEM_STAT_WAIT_WR_MA (0x0000001F) - -#define NS9750_MEM_STAT_WAIT_TURN_MA (0x0000000F) - - -#endif /* FS_NS9750_MEM_H */ diff --git a/include/ns9750_ser.h b/include/ns9750_ser.h deleted file mode 100644 index b5c297e436..0000000000 --- a/include/ns9750_ser.h +++ /dev/null @@ -1,202 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_ser.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @References: [1] NS9750 Hardware Reference, December 2003 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifndef FS_NS9750_SER_H -#define FS_NS9750_SER_H - -#define NS9750_SER_MODULE_BASE (0x90200000) - -#define get_ser_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_SER_MODULE_BASE+(unsigned int) (c))) - -#define get_ser_reg_addr_channel(reg,chan) \ - get_ser_reg_addr((reg)+(((chan)<2)?0:0x00100000)+(((chan)&1)?0x40:0)) - -/* the register addresses */ - -#define NS9750_SER_CTRL_A (0x00) -#define NS9750_SER_CTRL_B (0x04) -#define NS9750_SER_STAT_A (0x08) -#define NS9750_SER_BITRATE (0x0C) -#define NS9750_SER_FIFO (0x10) -#define NS9750_SER_RX_BUF_TIMER (0x14) -#define NS9750_SER_RX_CHAR_TIMER (0x18) -#define NS9750_SER_RX_MATCH (0x1C) -#define NS9750_SER_RX_MATCH_MASK (0x20) -#define NS9750_SER_FLOW_CTRL (0x34) -#define NS9750_SER_FLOW_CTRL_FORCE (0x38) - -/* register bit fields */ - -/* control A register */ - -#define NS9750_SER_CTRL_A_CE (0x80000000) -#define NS9750_SER_CTRL_A_BRK (0x40000000) -#define NS9750_SER_CTRL_A_STICKP (0x20000000) -#define NS9750_SER_CTRL_A_EPS (0x10000000) -#define NS9750_SER_CTRL_A_PE (0x08000000) -#define NS9750_SER_CTRL_A_STOP (0x04000000) -#define NS9750_SER_CTRL_A_WLS_MA (0x03000000) -#define NS9750_SER_CTRL_A_WLS_5 (0x00000000) -#define NS9750_SER_CTRL_A_WLS_6 (0x01000000) -#define NS9750_SER_CTRL_A_WLS_7 (0x02000000) -#define NS9750_SER_CTRL_A_WLS_8 (0x03000000) -#define NS9750_SER_CTRL_A_CTSTX (0x00800000) -#define NS9750_SER_CTRL_A_RTSRX (0x00400000) -#define NS9750_SER_CTRL_A_RL (0x00200000) -#define NS9750_SER_CTRL_A_LL (0x00100000) -#define NS9750_SER_CTRL_A_RES (0x000CF000) -#define NS9750_SER_CTRL_A_DTR (0x00020000) -#define NS9750_SER_CTRL_A_RTS (0x00010000) -#define NS9750_SER_CTRL_A_RIE_MA (0x00000E00) -#define NS9750_SER_CTRL_A_ERXDMA (0x00000100) -#define NS9750_SER_CTRL_A_RIC_MA (0x000000E0) -#define NS9750_SER_CTRL_A_TIC_MA (0x0000001E) -#define NS9750_SER_CTRL_A_ETXDMA (0x00000001) - -/* control B register */ - -#define NS9750_SER_CTRL_B_RDM1 (0x80000000) -#define NS9750_SER_CTRL_B_RDM2 (0x40000000) -#define NS9750_SER_CTRL_B_RDM3 (0x20000000) -#define NS9750_SER_CTRL_B_RDM4 (0x10000000) -#define NS9750_SER_CTRL_B_RBGT (0x08000000) -#define NS9750_SER_CTRL_B_RCGT (0x04000000) -#define NS9750_SER_CTRL_B_MODE_MA (0x00300000) -#define NS9750_SER_CTRL_B_MODE_UART (0x00000000) -#define NS9750_SER_CTRL_B_MODE_HDLC (0x00100000) -#define NS9750_SER_CTRL_B_MODE_SPI_M (0x00200000) -#define NS9750_SER_CTRL_B_MODE_SPI_S (0x00300000) -#define NS9750_SER_CTRL_B_BITORDR (0x00080000) -#define NS9750_SER_CTRL_B_RES (0x0007703F) -#define NS9750_SER_CTRL_B_RTSTX (0x00008000) -#define NS9750_SER_CTRL_B_ENDEC_MA (0x00000FC0) - -/* status A register */ - -#define NS9750_SER_STAT_A_MATCH1 (0x80000000) -#define NS9750_SER_STAT_A_MATCH2 (0x40000000) -#define NS9750_SER_STAT_A_MATCH3 (0x20000000) -#define NS9750_SER_STAT_A_MATCH4 (0x10000000) -#define NS9750_SER_STAT_A_BGAP (0x08000000) -#define NS9750_SER_STAT_A_CGAP (0x04000000) -#define NS9750_SER_STAT_A_RXFDB_MA (0x00300000) -#define NS9750_SER_STAT_A_RXFDB_FULL (0x00000000) -#define NS9750_SER_STAT_A_RXFDB_1 (0x00100000) -#define NS9750_SER_STAT_A_RXFDB_2 (0x00200000) -#define NS9750_SER_STAT_A_RXFDB_3 (0x00300000) -#define NS9750_SER_STAT_A_DCD (0x00080000) -#define NS9750_SER_STAT_A_RI (0x00040000) -#define NS9750_SER_STAT_A_DSR (0x00020000) -#define NS9750_SER_STAT_A_CTS (0x00010000) -#define NS9750_SER_STAT_A_RBRK (0x00008000) -#define NS9750_SER_STAT_A_RFE (0x00004000) -#define NS9750_SER_STAT_A_RPE (0x00002000) -#define NS9750_SER_STAT_A_ROVER (0x00001000) -#define NS9750_SER_STAT_A_RRDY (0x00000800) -#define NS9750_SER_STAT_A_RHALF (0x00000400) -#define NS9750_SER_STAT_A_RBC (0x00000200) -#define NS9750_SER_STAT_A_RFULL (0x00000100) -#define NS9750_SER_STAT_A_DCDI (0x00000080) -#define NS9750_SER_STAT_A_RII (0x00000040) -#define NS9750_SER_STAT_A_DSRI (0x00000020) -#define NS9750_SER_STAT_A_CTSI (0x00000010) -#define NS9750_SER_STAT_A_TRDY (0x00000008) -#define NS9750_SER_STAT_A_THALF (0x00000004) -#define NS9750_SER_STAT_A_TBC (0x00000002) -#define NS9750_SER_STAT_A_TEMPTY (0x00000001) - -#define NS9750_SER_STAT_A_RX_COND_ERR ( NS9750_SER_STAT_A_RFE | \ - NS9750_SER_STAT_A_ROVER | \ - NS9750_SER_STAT_A_RPE ) -#define NS9750_SER_STAT_A_RX_COND_ALL ( NS9750_SER_STAT_A_RX_COND_ERR | \ - NS9750_SER_STAT_A_RBRK | \ - NS9750_SER_STAT_A_RRDY | \ - NS9750_SER_STAT_A_RHALF | \ - NS9750_SER_STAT_A_RBC | \ - NS9750_SER_STAT_A_DCDI | \ - NS9750_SER_STAT_A_RII | \ - NS9750_SER_STAT_A_DSRI | \ - NS9750_SER_STAT_A_CTSI ) -#define NS9750_SER_STAT_A_TX_COND_ALL ( NS9750_SER_STAT_A_TRDY | \ - NS9750_SER_STAT_A_THALF | \ - NS9750_SER_STAT_A_TBC | \ - NS9750_SER_STAT_A_TEMPTY ) -/* bit rate register */ - -#define NS9750_SER_BITRATE_EBIT (0x80000000) -#define NS9750_SER_BITRATE_TMODE (0x40000000) -#define NS9750_SER_BITRATE_RXSRC (0x20000000) -#define NS9750_SER_BITRATE_TXSRC (0x10000000) -#define NS9750_SER_BITRATE_RXEXT (0x08000000) -#define NS9750_SER_BITRATE_TXEXT (0x04000000) -#define NS9750_SER_BITRATE_CLKMUX_MA (0x03000000) -#define NS9750_SER_BITRATE_CLKMUX_XTAL (0x00000000) -#define NS9750_SER_BITRATE_CLKMUX_BCLK (0x01000000) -#define NS9750_SER_BITRATE_CLKMUX_OUT1 (0x02000000) -#define NS9750_SER_BITRATE_CLKMUX_OUT2 (0x03000000) -#define NS9750_SER_BITRATE_TXCINV (0x00800000) -#define NS9750_SER_BITRATE_RXCINV (0x00400000) -#define NS9750_SER_BITRATE_TCDR_MA (0x00180000) -#define NS9750_SER_BITRATE_TCDR_1 (0x00000000) -#define NS9750_SER_BITRATE_TCDR_8 (0x00080000) -#define NS9750_SER_BITRATE_TCDR_16 (0x00100000) -#define NS9750_SER_BITRATE_TCDR_32 (0x00180000) -#define NS9750_SER_BITRATE_RCDR_MA (0x00070000) -#define NS9750_SER_BITRATE_RCDR_1 (0x00000000) -#define NS9750_SER_BITRATE_RCDR_8 (0x00020000) -#define NS9750_SER_BITRATE_RCDR_16 (0x00040000) -#define NS9750_SER_BITRATE_RCDR_32 (0x00060000) -#define NS9750_SER_BITRATE_TICS (0x00010000) -#define NS9750_SER_BITRATE_RICS (0x00008000) -#define NS9750_SER_BITRATE_N_MA (0x00007FFF) - -/* receive buffer gap timer */ - -#define NS9750_SER_RX_BUF_TIMER_TRUN (0x80000000) /* UART and SPI */ -#define NS9750_SER_RX_BUF_TIMER_BT_MA (0x0000FFFF) /* UART and SPI */ -#define NS9750_SER_RX_BUF_TIMER_MAXLEN_MA (0x0000FFFF) /* HDLC only */ - -/* receive character gap timer */ - -#define NS9750_SER_RX_CHAR_TIMER_TRUN (0x80000000) -#define NS9750_SER_RX_CHAR_TIMER_CT_MA (0x000FFFFF) - -/* receive match */ - -#define NS9750_SER_RX_MATCH_RDMB1_MA (0xFF000000) -#define NS9750_SER_RX_MATCH_RDMB2_MA (0x00FF0000) -#define NS9750_SER_RX_MATCH_RDMB3_MA (0x0000FF00) -#define NS9750_SER_RX_MATCH_RDMB4_MA (0x000000FF) - -/* receive match mask */ - -#define NS9750_SER_RX_MATCH_MASK_RDMB1_MA (0xFF000000) -#define NS9750_SER_RX_MATCH_MASK_RDMB2_MA (0x00FF0000) -#define NS9750_SER_RX_MATCH_MASK_RDMB3_MA (0x0000FF00) -#define NS9750_SER_RX_MATCH_MASK_RDMB4_MA (0x000000FF) - -#endif /* FS_NS9750_SER_H */ diff --git a/include/ns9750_sys.h b/include/ns9750_sys.h deleted file mode 100644 index f1dc2b2382..0000000000 --- a/include/ns9750_sys.h +++ /dev/null @@ -1,215 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_sys.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for SYS Control Module - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 4 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifndef FS_NS9750_SYS_H -#define FS_NS9750_SYS_H - -#define NS9750_SYS_MODULE_BASE (0xA0900000) - -#define get_sys_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_SYS_MODULE_BASE+(unsigned int) (c))) - -/* the register addresses */ - -#define NS9750_SYS_AHB_GEN (0x0000) -#define NS9750_SYS_BRC_BASE (0x0004) -#define NS9750_SYS_AHB_TIMEOUT (0x0014) -#define NS9750_SYS_AHB_ERROR1 (0x0018) -#define NS9750_SYS_AHB_ERROR2 (0x001C) -#define NS9750_SYS_AHB_MON (0x0020) -#define NS9750_SYS_TIMER_COUNT_BASE (0x0044) -#define NS9750_SYS_TIMER_READ_BASE (0x0084) -#define NS9750_SYS_INT_VEC_ADR_BASE (0x00C4) -#define NS9750_SYS_INT_CFG_BASE (0x0144) -#define NS9750_SYS_ISRADDR (0x0164) -#define NS9750_SYS_INT_STAT_ACTIVE (0x0168) -#define NS9750_SYS_INT_STAT_RAW (0x016C) -#define NS9750_SYS_TIMER_INT_STAT (0x0170) -#define NS9750_SYS_SW_WDOG_CFG (0x0174) -#define NS9750_SYS_SW_WDOG_TIMER (0x0178) -#define NS9750_SYS_CLOCK (0x017C) -#define NS9750_SYS_RESET (0x0180) -#define NS9750_SYS_MISC (0x0184) -#define NS9750_SYS_PLL (0x0188) -#define NS9750_SYS_ACT_INT_STAT (0x018C) -#define NS9750_SYS_TIMER_CTRL_BASE (0x0190) -#define NS9750_SYS_CS_DYN_BASE_BASE (0x01D0) -#define NS9750_SYS_CS_DYN_MASK_BASE (0x01D4) -#define NS9750_SYS_CS_STATIC_BASE_BASE (0x01F0) -#define NS9750_SYS_CS_STATIC_MASK_BASE (0x01F4) -#define NS9750_SYS_GEN_ID (0x0210) -#define NS9750_SYS_EXT_INT_CTRL_BASE (0x0214) - -/* the vectored register addresses */ - -#define NS9750_SYS_TIMER_COUNT(c) (NS9750_SYS_TIMER_COUNT_BASE + (c)) -#define NS9750_SYS_TIMER_READ(c) (NS9750_SYS_TIMER_READ_BASE + (c)) -#define NS9750_SYS_INT_VEC_ADR(c) (NS9750_SYS_INT_VEC_ADR_BASE + (c)) -#define NS9750_SYS_TIMER_CTRL(c) (NS9750_SYS_TIMER_CTRL_BASE + (c)) -/* CS_DYN start with 4 */ -#define NS9750_SYS_CS_DYN_BASE(c) (NS9750_SYS_CS_DYN_BASE_BASE + ((c)-4)*2) -#define NS9750_SYS_CS_DYN_MASK(c) (NS9750_SYS_CS_DYN_MASK_BASE + ((c)-4)*2) -/* CS_STATIC start with 0 */ -#define NS9750_SYS_CS_STATIC_BASE(c) (NS9750_SYS_CS_STATIC_BASE_BASE + (c)*2) -#define NS9750_SYS_CS_STATIC_MASK(c) (NS9750_SYS_CS_STATIC_MASK_BASE + (c)*2) -#define NS9750_SYS_EXT_INT_CTRL(c) (NS9750_SYS_EXT_INT_CTRL + (c)) - -/* register bit fields */ - -#define NS9750_SYS_AHB_GEN_EXMAM (0x00000001) - -/* need to be n*8bit to BRC channel */ -#define NS9750_SYS_BRC_CEB (0x00000080) -#define NS9750_SYS_BRC_BRF_MA (0x00000030) -#define NS9750_SYS_BRC_BRF_100 (0x00000000) -#define NS9750_SYS_BRC_BRF_75 (0x00000010) -#define NS9750_SYS_BRC_BRF_50 (0x00000020) -#define NS9750_SYS_BRC_BRF_25 (0x00000030) - -#define NS9750_SYS_AHB_TIMEOUT_BAT_MA (0xFFFF0000) -#define NS9750_SYS_AHB_TIMEOUT_BMT_MA (0x0000FFFF) - -#define NS9750_SYS_AHB_ERROR2_ABL (0x00040000) -#define NS9750_SYS_AHB_ERROR2_AER (0x00020000) -#define NS9750_SYS_AHB_ERROR2_ABM (0x00010000) -#define NS9750_SYS_AHB_ERROR2_ABA (0x00008000) -#define NS9750_SYS_AHB_ERROR2_HWRT (0x00004000) -#define NS9750_SYS_AHB_ERROR2_HMID_MA (0x00003C00) -#define NS9750_SYS_AHB_ERROR2_HTPC_MA (0x000003C0) -#define NS9750_SYS_AHB_ERROR2_HSZ_MA (0x00000038) -#define NS9750_SYS_AHB_ERROR2_RR_MA (0x00000007) - -#define NS9750_SYS_AHB_MON_EIC (0x00800000) -#define NS9750_SYS_AHB_MON_MBII (0x00400000) -#define NS9750_SYS_AHB_MON_MBL_MA (0x003FFFC0) -#define NS9750_SYS_AHB_MON_MBLDC (0x00000020) -#define NS9750_SYS_AHB_MON_SERDC (0x00000010) -#define NS9750_SYS_AHB_MON_BMTC_MA (0x0000000C) -#define NS9750_SYS_AHB_MON_BMTC_RECORD (0x00000000) -#define NS9750_SYS_AHB_MON_BMTC_GEN_IRQ (0x00000004) -#define NS9750_SYS_AHB_MON_BMTC_GEN_RES (0x00000008) -#define NS9750_SYS_AHB_MON_BATC_MA (0x00000003) -#define NS9750_SYS_AHB_MON_BATC_RECORD (0x00000000) -#define NS9750_SYS_AHB_MON_BATC_GEN_IRQ (0x00000001) -#define NS9750_SYS_AHB_MON_BATC_GEN_RES (0x00000002) - -/* need to be n*8bit to Int Level */ - -#define NS9750_SYS_INT_CFG_IE (0x00000080) -#define NS9750_SYS_INT_CFG_IT (0x00000020) -#define NS9750_SYS_INT_CFG_IAD_MA (0x0000001F) - -#define NS9750_SYS_TIMER_INT_STAT_MA (0x0000FFFF) - -#define NS9750_SYS_SW_WDOG_CFG_SWWE (0x00000080) -#define NS9750_SYS_SW_WDOG_CFG_SWWI (0x00000020) -#define NS9750_SYS_SW_WDOG_CFG_SWWIC (0x00000010) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_MA (0x00000007) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_2 (0x00000000) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_4 (0x00000001) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_8 (0x00000002) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_16 (0x00000003) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_32 (0x00000004) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_64 (0x00000005) - -#define NS9750_SYS_CLOCK_LPCS_MA (0x00000380) -#define NS9750_SYS_CLOCK_LPCS_1 (0x00000000) -#define NS9750_SYS_CLOCK_LPCS_2 (0x00000080) -#define NS9750_SYS_CLOCK_LPCS_4 (0x00000100) -#define NS9750_SYS_CLOCK_LPCS_8 (0x00000180) -#define NS9750_SYS_CLOCK_LPCS_EXT (0x00000200) -#define NS9750_SYS_CLOCK_BBC (0x00000040) -#define NS9750_SYS_CLOCK_LCC (0x00000020) -#define NS9750_SYS_CLOCK_MCC (0x00000010) -#define NS9750_SYS_CLOCK_PARBC (0x00000008) -#define NS9750_SYS_CLOCK_PC (0x00000004) -#define NS9750_SYS_CLOCK_MACC (0x00000001) - -#define NS9750_SYS_RESET_SR (0x80000000) -#define NS9750_SYS_RESET_I2CW (0x00100000) -#define NS9750_SYS_RESET_CSE (0x00080000) -#define NS9750_SYS_RESET_SMWE (0x00040000) -#define NS9750_SYS_RESET_EWE (0x00020000) -#define NS9750_SYS_RESET_PI3WE (0x00010000) -#define NS9750_SYS_RESET_BBT (0x00000040) -#define NS9750_SYS_RESET_LCDC (0x00000020) -#define NS9750_SYS_RESET_MEMC (0x00000010) -#define NS9750_SYS_RESET_PCIAR (0x00000008) -#define NS9750_SYS_RESET_PCIM (0x00000004) -#define NS9750_SYS_RESET_MACM (0x00000001) - -#define NS9750_SYS_MISC_REV_MA (0xFF000000) -#define NS9750_SYS_MISC_PCIA (0x00002000) -#define NS9750_SYS_MISC_VDIS (0x00001000) -#define NS9750_SYS_MISC_BMM (0x00000800) -#define NS9750_SYS_MISC_CS1DB (0x00000400) -#define NS9750_SYS_MISC_CS1DW_MA (0x00000300) -#define NS9750_SYS_MISC_MCCM (0x00000080) -#define NS9750_SYS_MISC_PMSS (0x00000040) -#define NS9750_SYS_MISC_CS1P (0x00000020) -#define NS9750_SYS_MISC_ENDM (0x00000008) -#define NS9750_SYS_MISC_MBAR (0x00000004) -#define NS9750_SYS_MISC_IRAM0 (0x00000001) - -#define NS9750_SYS_PLL_PLLBS (0x02000000) -#define NS9750_SYS_PLL_PLLFS_MA (0x01800000) -#define NS9750_SYS_PLL_PLLIS_MA (0x00600000) -#define NS9750_SYS_PLL_PLLND_MA (0x001F0000) -#define NS9750_SYS_PLL_PLLSW (0x00008000) -#define NS9750_SYS_PLL_PLLBSSW (0x00000200) -#define NS9750_SYS_PLL_FSEL_MA (0x00000180) -#define NS9750_SYS_PLL_CPCC_MA (0x00000060) -#define NS9750_SYS_PLL_NDSW_MA (0x0000001F) - -#define NS9750_SYS_ACT_INT_STAT_MA (0x0000FFFF) - -#define NS9750_SYS_TIMER_CTRL_TEN (0x00008000) -#define NS9750_SYS_TIMER_CTRL_INTC (0x00000200) -#define NS9750_SYS_TIMER_CTRL_TLCS_MA (0x000001C0) -#define NS9750_SYS_TIMER_CTRL_TLCS_1 (0x00000000) -#define NS9750_SYS_TIMER_CTRL_TLCS_2 (0x00000040) -#define NS9750_SYS_TIMER_CTRL_TLCS_4 (0x00000080) -#define NS9750_SYS_TIMER_CTRL_TLCS_8 (0x000000C0) -#define NS9750_SYS_TIMER_CTRL_TLCS_16 (0x00000100) -#define NS9750_SYS_TIMER_CTRL_TLCS_32 (0x00000140) -#define NS9750_SYS_TIMER_CTRL_TLCS_64 (0x00000180) -#define NS9750_SYS_TIMER_CTRL_TLCS_EXT (0x000001C0) -#define NS9750_SYS_TIMER_CTRL_TM_MA (0x00000030) -#define NS9750_SYS_TIMER_CTRL_TM_INT (0x00000000) -#define NS9750_SYS_TIMER_CTRL_TM_LOW (0x00000010) -#define NS9750_SYS_TIMER_CTRL_TM_HIGH (0x00000020) -#define NS9750_SYS_TIMER_CTRL_INTS (0x00000008) -#define NS9750_SYS_TIMER_CTRL_UDS (0x00000004) -#define NS9750_SYS_TIMER_CTRL_TSZ (0x00000002) -#define NS9750_SYS_TIMER_CTRL_REN (0x00000001) - -#define NS9750_SYS_EXT_INT_CTRL_STS (0x00000008) -#define NS9750_SYS_EXT_INT_CTRL_CLR (0x00000004) -#define NS9750_SYS_EXT_INT_CTRL_PLTY (0x00000002) -#define NS9750_SYS_EXT_INT_CTRL_LVEDG (0x00000001) - -#endif /* FS_NS9750_SYS_H */ diff --git a/include/spl.h b/include/spl.h index b02f36fa94..b40be8039c 100644 --- a/include/spl.h +++ b/include/spl.h @@ -59,6 +59,9 @@ void spl_display_print(void); /* NAND SPL functions */ void spl_nand_load_image(void); +/* OneNAND SPL functions */ +void spl_onenand_load_image(void); + /* NOR SPL functions */ void spl_nor_load_image(void); diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 3ae348dd30..43f29f5c6b 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -37,6 +37,7 @@ DECLARE_GLOBAL_DATA_PTR; static const char * const compat_names[COMPAT_COUNT] = { COMPAT(UNKNOWN, "<none>"), COMPAT(NVIDIA_TEGRA20_USB, "nvidia,tegra20-ehci"), + COMPAT(NVIDIA_TEGRA114_I2C, "nvidia,tegra114-i2c"), COMPAT(NVIDIA_TEGRA20_I2C, "nvidia,tegra20-i2c"), COMPAT(NVIDIA_TEGRA20_DVC, "nvidia,tegra20-i2c-dvc"), COMPAT(NVIDIA_TEGRA20_EMC, "nvidia,tegra20-emc"), @@ -45,6 +46,8 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"), COMPAT(NVIDIA_TEGRA20_PWM, "nvidia,tegra20-pwm"), COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"), + COMPAT(NVIDIA_TEGRA30_SDMMC, "nvidia,tegra30-sdhci"), + COMPAT(NVIDIA_TEGRA20_SDMMC, "nvidia,tegra20-sdhci"), COMPAT(NVIDIA_TEGRA20_SFLASH, "nvidia,tegra20-sflash"), COMPAT(NVIDIA_TEGRA20_SLINK, "nvidia,tegra20-slink"), COMPAT(SMSC_LAN9215, "smsc,lan9215"), diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile index 9c778261b6..3a2a2d4b17 100644 --- a/nand_spl/board/freescale/mpc8536ds/Makefile +++ b/nand_spl/board/freescale/mpc8536ds/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile index 9c778261b6..3a2a2d4b17 100644 --- a/nand_spl/board/freescale/mpc8569mds/Makefile +++ b/nand_spl/board/freescale/mpc8569mds/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile index 9c778261b6..3a2a2d4b17 100644 --- a/nand_spl/board/freescale/mpc8572ds/Makefile +++ b/nand_spl/board/freescale/mpc8572ds/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile index fd0dfc19d8..3d57059f50 100644 --- a/nand_spl/board/freescale/mx31pdk/Makefile +++ b/nand_spl/board/freescale/mx31pdk/Makefile @@ -6,7 +6,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL @@ -38,11 +37,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds index eaccd55977..5f2b5e2022 100644 --- a/nand_spl/board/freescale/mx31pdk/u-boot.lds +++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4); diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile index c3495ec0df..f7bdf9207d 100644 --- a/nand_spl/board/freescale/p1010rdb/Makefile +++ b/nand_spl/board/freescale/p1010rdb/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile index 9b2c0d7f35..fb7d5612a1 100644 --- a/nand_spl/board/freescale/p1023rds/Makefile +++ b/nand_spl/board/freescale/p1023rds/Makefile @@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -57,11 +56,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile index 9c778261b6..3a2a2d4b17 100644 --- a/nand_spl/board/freescale/p1_p2_rdb/Makefile +++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile index 82489d2405..9f9c5893cf 100644 --- a/nand_spl/board/karo/tx25/Makefile +++ b/nand_spl/board/karo/tx25/Makefile @@ -27,7 +27,6 @@ include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL @@ -59,11 +58,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds index e047edb4d3..4d1aac3677 100644 --- a/nand_spl/board/karo/tx25/u-boot.lds +++ b/nand_spl/board/karo/tx25/u-boot.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4); diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds index ae2bc4b651..b6c573be5c 100644 --- a/nand_spl/board/samsung/smdk6400/u-boot.lds +++ b/nand_spl/board/samsung/smdk6400/u-boot.lds @@ -53,7 +53,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4); diff --git a/spl/.gitignore b/spl/.gitignore index 8cf487e5c8..7c8814709f 100644 --- a/spl/.gitignore +++ b/spl/.gitignore @@ -2,4 +2,3 @@ u-boot-spl u-boot-spl.bin u-boot-spl.lds u-boot-spl.map -u-boot.lst diff --git a/spl/Makefile b/spl/Makefile index 101d478c66..14095c8df7 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -81,6 +81,8 @@ LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o +LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o +LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o @@ -117,7 +119,7 @@ ifeq ($(wildcard $(LDSCRIPT)),) LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-spl.lds endif ifeq ($(wildcard $(LDSCRIPT)),) - LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds + LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot-spl.lds endif ifeq ($(wildcard $(LDSCRIPT)),) $(error could not find linker script) @@ -175,11 +177,7 @@ $(START): depend $(LIBS): depend $(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@)) -# The following line expands into whole rule which generates u-boot.lst, -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS))) -$(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend +$(obj)u-boot-spl.lds: $(LDSCRIPT) depend $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@ depend: $(obj).depend |