summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorCodrin Ciubotariu <codrin.ciubotariu@freescale.com>2015-12-15 15:21:04 +0200
committerJoe Hershberger <joe.hershberger@ni.com>2016-01-28 12:22:11 -0600
commit3507cf7f4a7ad09b017a3890a4a71322238d693f (patch)
tree5f9db15b078976f44bcf5b87a61f72b8871fc8ee /doc
parentba389e65e5bb64506ad35b3d7007ec1b3b9cf4de (diff)
doc: t1040-l2switch: Update README
The driver for VSC9953 L2 switch IP supports many features and the documentation needs to be updated. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.t1040-l2switch27
1 files changed, 20 insertions, 7 deletions
diff --git a/doc/README.t1040-l2switch b/doc/README.t1040-l2switch
index 14dbf31bf2..4e0f418c7c 100644
--- a/doc/README.t1040-l2switch
+++ b/doc/README.t1040-l2switch
@@ -24,16 +24,29 @@ Switch interfaces:
Commands Overview:
=============
Commands supported
- - enable/disable a port
- - check a port's link speed, duplexity and status.
+ - enable/disable a port or show its configuration (speed, duplexity, status, etc.)
+ - port statistics
+ - MAC learning
+ - add/remove FDB entries
+ - Port-based VLAN
+ - Private/Shared VLAN learning
+ - VLAN ingress filtering
Commands syntax
- ethsw port <port_nr> enable|disable - enable/disable an l2 switch port
- ethsw port <port_nr> show - show an l2 switch port's configuration
+ethsw [port <port_no>] { enable | disable | show } - enable/disable a port; show a port's configuration
+ethsw [port <port_no>] statistics { [help] | [clear] } - show an l2 switch port's statistics
+ethsw [port <port_no>] learning { [help] | show | auto | disable } - enable/disable/show learning configuration on a port
+ethsw [port <port_no>] [vlan <vid>] fdb { [help] | show | flush | { add | del } <mac> } - add/delete a mac entry in FDB; use show to see FDB entries;
+ if [vlan <vid>] is missing, VID 1 will be used
+ethsw [port <port_no>] pvid { [help] | show | <pvid> } - set/show PVID (ingress and egress VLAN tagging) for a port
+ethsw [port <port_no>] vlan { [help] | show | add <vid> | del <vid> } - add a VLAN to a port (VLAN members)
+ethsw [port <port_no>] untagged { [help] | show | all | none | pvid } - set egress tagging mode for a port
+ethsw [port <port_no>] egress tag { [help] | show | pvid | classified } - configure VID source for egress tag.
+ Tag's VID could be the frame's classified VID or the PVID of the port
+ethsw vlan fdb { [help] | show | shared | private } - make VLAN learning shared or private
+ethsw [port <port_no>] ingress filtering { [help] | show | enable | disable } - enable/disable VLAN ingress filtering on port
- port_nr=0..9; use "all" for all ports
-
-=> ethsw port all show
+=> ethsw show
Port Status Link Speed Duplex
0 enabled down 10 half
1 enabled down 10 half