sunxi: add initial clock setup for sun9i for SPL

2 files changed, 204 insertions, 4 deletions

diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun9i.c b/arch/arm/cpu/armv7/sunxi/clock_sun9i.c
index 180634c838..78d373e573 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun9i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun9i.c
@@ -1,8 +1,12 @@
+
 /*
  * sun9i specific clock code
  *
  * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
  *
+ * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
+ *                    Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
+ *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
@@ -12,6 +16,46 @@
 #include <asm/arch/prcm.h>
 #include <asm/arch/sys_proto.h>
 
+
+#ifdef CONFIG_SPL_BUILD
+
+void clock_init_safe(void)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* Set up PLL12 (peripheral 1) */
+	clock_set_pll12(1200000000);
+
+	/* Set up PLL1 (cluster 0) and PLL2 (cluster 1) */
+	clock_set_pll1(408000000);
+	clock_set_pll2(408000000);
+
+	/* Set up PLL4 (peripheral 0) */
+	clock_set_pll4(960000000);
+
+	/* Set up dividers for AXI0 and APB0 on cluster 0: PLL1 / 2 = 204MHz */
+	writel(C0_CFG_AXI0_CLK_DIV_RATIO(2) | C0_CFG_APB0_CLK_DIV_RATIO(2), &ccm->c0_cfg);
+
+	writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8), &ccm->ahb0_cfg); /* AHB0: 120MHz */
+	writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(4), &ccm->ahb1_cfg); /* AHB1: 240MHz */
+	writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8), &ccm->ahb2_cfg); /* AHB2: 120MHz */
+	writel(APB0_SRC_PLL_PERIPH0 | APB0_CLK_DIV_RATIO(8), &ccm->apb0_cfg); /* APB0: 120MHz */
+
+	/* GTBUS: 400MHz (PERIPH0 div 3) */
+	writel(GTBUS_SRC_PLL_PERIPH1 | GTBUS_CLK_DIV_RATIO(3), &ccm->gtbus_cfg);
+	/* CCI400: 480MHz (PERIPH1 div 2) */
+	writel(CCI400_SRC_PLL_PERIPH0 | CCI400_CLK_DIV_RATIO(2), &ccm->cci400_cfg);
+
+	/* Deassert DMA reset and open clock gating for DMA */
+	setbits_le32(&ccm->ahb_reset1_cfg, (1 << 24));
+	setbits_le32(&ccm->apb1_gate, (1 << 24));
+
+	/* set enable-bit in TSTAMP_CTRL_REG */
+	writel(1, 0x01720000);
+}
+#endif
+
 void clock_init_uart(void)
 {
 	struct sunxi_ccm_reg *const ccm =
@@ -25,10 +69,89 @@ void clock_init_uart(void)
 	setbits_le32(&ccm->apb1_reset_cfg,
 		     1 << (APB1_RESET_UART_SHIFT +
 			   CONFIG_CONS_INDEX - 1));
+}
+
+#ifdef CONFIG_SPL_BUILD
+void clock_set_pll1(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int p = 0;
+
+	/* Switch cluster 0 to 24MHz clock while changing PLL1 */
+	clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK, C0_CPUX_CLK_SRC_OSC24M);
+
+	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | CCM_PLL1_CLOCK_TIME_2 |
+	       CCM_PLL1_CTRL_N(clk / 24000000),
+	       &ccm->pll1_c0_cfg);
+	/* Don't bother with the stable-time registers, as it doesn't wait until the PLL is
+	   stable.  Note, that even Allwinner just uses a delay loop (or rather the AVS timer)
+	   for this instead of the PLL_STABLE_STATUS register. */
+	sdelay(2000);
+
+	/* Switch cluster 0 back to PLL1 */
+	clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK, C0_CPUX_CLK_SRC_PLL1);
+}
+
+void clock_set_pll2(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int p = 0;
+
+	/* Switch cluster 1 to 24MHz clock while changing PLL2 */
+	clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK, C1_CPUX_CLK_SRC_OSC24M);
+
+	writel(CCM_PLL2_CTRL_EN | CCM_PLL2_CTRL_P(p) | CCM_PLL2_CLOCK_TIME_2 |
+	       CCM_PLL2_CTRL_N(clk / 24000000),
+	       &ccm->pll2_c1_cfg);
+
+	sdelay(2000);
+
+	/* Switch cluster 1 back to PLL2 */
+	clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK, C1_CPUX_CLK_SRC_PLL2);
+}
+
+void clock_set_pll6(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int p = 0;
+
+	writel(CCM_PLL6_CTRL_EN | CCM_PLL6_CFG_UPDATE | CCM_PLL6_CTRL_P(p)
+	       | CCM_PLL6_CTRL_N(clk / 24000000),
+	       &ccm->pll6_ddr_cfg);
+	do { } while (!(readl(&ccm->pll_stable_status) & PLL_DDR_STATUS));
+
+	sdelay(2000);
+}
+
+void clock_set_pll12(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	if (readl(&ccm->pll12_periph1_cfg) & CCM_PLL12_CTRL_EN)
+	  return;
+
+	writel(CCM_PLL12_CTRL_EN | CCM_PLL12_CTRL_N(clk / 24000000),
+	       &ccm->pll12_periph1_cfg);
+
+	sdelay(2000);
+}
+
+
+void clock_set_pll4(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	writel(CCM_PLL4_CTRL_EN | CCM_PLL4_CTRL_N(clk / 24000000),
+	       &ccm->pll4_periph0_cfg);
 
-	/* Dup with clock_init_safe(), drop once sun9i SPL support lands */
-	writel(PLL4_CFG_DEFAULT, &ccm->pll4_periph0_cfg);
+	sdelay(2000);
 }
+#endif
 
 int clock_twi_onoff(int port, int state)
 {
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun9i.h b/arch/arm/include/asm/arch-sunxi/clock_sun9i.h
index 1e73d7dd6a..b79eceaba2 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun9i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun9i.h
@@ -105,8 +105,6 @@ struct sunxi_sysctl_reg {
 	u32 disp_mux_cfg;       /* 0x38 display MUX control */
 };
 
-/* pll4_periph0_cfg */
-#define PLL4_CFG_DEFAULT		0x90002800 /* 960 MHz */
 
 #define CCM_PLL4_CTRL_N_SHIFT		8
 #define CCM_PLL4_CTRL_N_MASK		(0xff << CCM_PLL4_CTRL_N_SHIFT)
@@ -115,6 +113,80 @@ struct sunxi_sysctl_reg {
 #define CCM_PLL4_CTRL_M_SHIFT		18
 #define CCM_PLL4_CTRL_M_MASK		(0x1 << CCM_PLL4_CTRL_M_SHIFT)
 
+/* pllx_cfg bits */
+#define CCM_PLL1_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL1_CTRL_P(n)		(((n) & 0x1) << 16)
+#define CCM_PLL1_CTRL_EN		(1 << 31)
+#define CCM_PLL1_CLOCK_TIME_2		(2 << 24)
+
+#define CCM_PLL2_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL2_CTRL_P(n)		(((n) & 0x1) << 16)
+#define CCM_PLL2_CTRL_EN		(1 << 31)
+#define CCM_PLL2_CLOCK_TIME_2		(2 << 24)
+
+#define CCM_PLL4_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL4_CTRL_EN		(1 << 31)
+
+#define CCM_PLL6_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL6_CTRL_P(p)		(((p) & 0x1) << 16)
+#define CCM_PLL6_CTRL_EN		(1 << 31)
+#define CCM_PLL6_CFG_UPDATE             (1 << 30)
+
+#define CCM_PLL12_CTRL_N(n)		(((n) & 0xff) << 8)
+#define CCM_PLL12_CTRL_EN		(1 << 31)
+
+#define PLL_C0CPUX_STATUS               (1 << 0)
+#define PLL_C1CPUX_STATUS               (1 << 1)
+#define PLL_DDR_STATUS                  (1 << 5)
+#define PLL_PERIPH1_STATUS              (1 << 11)
+
+/* cpu_clk_source bits */
+#define C0_CPUX_CLK_SRC_SHIFT           0
+#define C1_CPUX_CLK_SRC_SHIFT           8
+#define C0_CPUX_CLK_SRC_MASK            (1 << C0_CPUX_CLK_SRC_SHIFT)
+#define C1_CPUX_CLK_SRC_MASK            (1 << C1_CPUX_CLK_SRC_SHIFT)
+#define C0_CPUX_CLK_SRC_OSC24M		(0 << C0_CPUX_CLK_SRC_SHIFT)
+#define C0_CPUX_CLK_SRC_PLL1		(1 << C0_CPUX_CLK_SRC_SHIFT)
+#define C1_CPUX_CLK_SRC_OSC24M		(0 << C1_CPUX_CLK_SRC_SHIFT)
+#define C1_CPUX_CLK_SRC_PLL2		(1 << C1_CPUX_CLK_SRC_SHIFT)
+
+/* c0_cfg */
+#define C0_CFG_AXI0_CLK_DIV_RATIO(n)    (((n - 1) & 0x3) << 0)
+#define C0_CFG_APB0_CLK_DIV_RATIO(n)    (((n - 1) & 0x3) << 8)
+
+/* ahbx_cfg */
+#define AHBx_SRC_CLK_SELECT_SHIFT       24
+#define AHBx_SRC_MASK                   (0b11 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHB0_SRC_GTBUS_CLK              (0b00 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHB1_SRC_GTBUS_CLK              (0b00 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHB2_SRC_OSC24M                 (0b00 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHBx_SRC_PLL_PERIPH0            (0b01 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHBx_SRC_PLL_PERIPH1            (0b10 << AHBx_SRC_CLK_SELECT_SHIFT)
+#define AHBx_CLK_DIV_RATIO(n)           (((ffs(n) - 1) & 0x3) << 0)
+
+/* apb0_cfg */
+#define APB0_SRC_CLK_SELECT_SHIFT       24
+#define APB0_SRC_MASK                   (0b1 << APB0_SRC_CLK_SELECT_SHIFT)
+#define APB0_SRC_OSC24M                 (0b0 << APB0_SRC_CLK_SELECT_SHIFT)
+#define APB0_SRC_PLL_PERIPH0            (0b1 << APB0_SRC_CLK_SELECT_SHIFT)
+#define APB0_CLK_DIV_RATIO(n)           (((ffs(n) - 1) & 0x3) << 0)
+
+/* gtbus_clk_cfg */
+#define GTBUS_SRC_CLK_SELECT_SHIFT      24
+#define GTBUS_SRC_MASK                  (0b11 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_SRC_OSC24M                (0b00 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_SRC_PLL_PERIPH0           (0b01 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_SRC_PLL_PERIPH1           (0b10 << GTBUS_SRC_CLK_SELECT_SHIFT)
+#define GTBUS_CLK_DIV_RATIO(n)          (((n - 1) & 0x3) << 0)
+
+/* cci400_clk_cfg */
+#define CCI400_SRC_CLK_SELECT_SHIFT     24
+#define CCI400_SRC_MASK                 (0b11 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_SRC_OSC24M               (0b00 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_SRC_PLL_PERIPH0          (0b01 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_SRC_PLL_PERIPH1          (0b10 << CCI400_SRC_CLK_SELECT_SHIFT)
+#define CCI400_CLK_DIV_RATIO(n)         (((n - 1) & 0x3) << 0)
+
 /* sd#_clk_cfg fields */
 #define CCM_MMC_CTRL_M(x)		((x) - 1)
 #define CCM_MMC_CTRL_OCLK_DLY(x)	((x) << 8)
@@ -165,6 +237,11 @@ struct sunxi_sysctl_reg {
 #define CCM_GMAC_CTRL_TX_CLK_DELAY(x)	     ((x) << 10)
 
 #ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int clk);
+void clock_set_pll2(unsigned int clk);
+void clock_set_pll4(unsigned int clk);
+void clock_set_pll6(unsigned int clk);
+void clock_set_pll12(unsigned int clk);
 unsigned int clock_get_pll4_periph0(void);
 #endif