From 97cb8f1ed91fd1d4993cd18168b600a8294a7c6f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 30 Jun 2014 23:57:57 +0200 Subject: ARM: dts: sun4i: Add new ba10-tvbox board The ba10 tvbox is an A10 based android tvbox, with 512M RAM, 8G nand flash, rtl8188ctv usb wifi 1 USB-A receptacle hooked up to an EHCI/OHCI controller, 1 USB-A receptacle hooked up to the OTG and 100Mbit ethernet using a rtl8201 phy. The PCB is labelled ba10 hence I've named the board ba10-tvbox. It is used in noname allwinner A10 tv-boxes. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 110 +++++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts (limited to 'arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts') diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts new file mode 100644 index 000000000000..1763cc7ec023 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -0,0 +1,110 @@ +/* + * Copyright 2014 Hans de Goede + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i-a10.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "BA10 tvbox"; + compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; + + soc@01c00000 { + emac: ethernet@01c0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; + }; + + mdio@01c0b080 { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + gpio = <&pio 7 12 0>; + status = "okay"; + }; +}; -- cgit v1.2.3