summaryrefslogtreecommitdiff
path: root/drivers/rapidio
AgeCommit message (Collapse)Author
2016-09-01rapidio/tsi721: fix incorrect detection of address translation conditionAlexandre Bounine
Fix incorrect condition to identify involvment of a address translation mechanism. This bug results in NULL pointer kernel crash dump in cases when mapping of inbound RapidIO address range is requested within existing aprture. Link: http://lkml.kernel.org/r/20160901173144.2983-1-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-10rapidio: dereferencing an error pointerDan Carpenter
Original patch: https://lkml.org/lkml/2016/8/4/32 If riocm_ch_alloc() fails then we end up dereferencing the error pointer. The problem is that we're not unwinding in the reverse order from how we allocate things so it gets confusing. I've changed this around so now "ch" is NULL when we are done with it after we call riocm_put_channel(). That way we can check if it's NULL and avoid calling riocm_put_channel() on it twice. I renamed err_nodev to err_put_new_ch so that it better reflects what the goto does. Then because we had flipping things around, it means we don't neeed to initialize the pointers to NULL and we can remove an if statement and pull things in an indent level. Link: http://lkml.kernel.org/r/20160805152406.20713-1-alexandre.bounine@idt.com Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/switches: add driver for IDT gen3 switchesAlexandre Bounine
Add RapidIO switch driver for IDT Gen3 switch devices: RXS1632 and RXS2448. [alexandre.bounine@idt.com: fixup for original driver patch] Link: http://lkml.kernel.org/r/1469137596-18241-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-14-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: modify for rev.3 specification changesAlexandre Bounine
Implement changes made in RapidIO specification rev.3 to LP-Serial Physical Layer register definitions: - use per-port register offset calculations based on LP-Serial Extended Features Block (EFB) Register Map type (I or II) with different per-port offset step (0x20 vs 0x40 respectfully). - remove deprecated Parallel Physical layer definitions and related code. [alexandre.bounine@idt.com: fix DocBook warning for gen3 update] Link: http://lkml.kernel.org/r/1469191173-19338-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-12-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: change inbound window size type to u64Alexandre Bounine
Current definition of map_inb() mport operations callback uses u32 type to specify required inbound window (IBW) size. This is limiting factor because existing hardware - tsi721 and fsl_rio, both support IBW size up to 16GB. Changing type of size parameter to u64 to allow IBW size configurations larger than 4GB. [alexandre.bounine@idt.com: remove compiler warning about size of constant] Link: http://lkml.kernel.org/r/20160802184856.2566-1-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-11-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/idt_gen2: fix locking warningAlexandre Bounine
Fix lockdep warning during device probing: move sysfs initialization out of code protected by a spin lock. Link: http://lkml.kernel.org/r/1469125134-16523-10-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: fix error handling in mbox request/release functionsAlexandre Bounine
Add checking for error code returned by HW-specific mbox open routines. Ensure that resources are properly release if failed. This patch is applicable to kernel versions starting from v2.6.15. Link: http://lkml.kernel.org/r/1469125134-16523-9-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721_dma: advance queue processing from transfer submit callAlexandre Bounine
Add advancing transfer queue immediately from transfer submit call. DMA performance improvement: This will start transfer without waiting for 'issue_pending' command if there is no DMA transfer in progress. Link: http://lkml.kernel.org/r/1469125134-16523-8-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721: add messaging mbox selector parameterAlexandre Bounine
Add module parameter to allow load time configuration of available RapidIO messaging mailboxes (MBOX1 - MBOX4). Having a messaging MBOX selector mask allows to define which MBOXes are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-7-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721: add PCIe MRRS override parameterAlexandre Bounine
Add PCIe Maximum Read Request Size (MRRS) adjustment parameter to allow users to override configuration register value set during PCIe bus initialization. Performance of Tsi721 device as PCIe bus master can be improved if MRRS is set to its maximum value (4096 bytes). Some platforms have limitations for supported MRRS and therefore the default value should be preserved, unless it is known that given platform supports full set of MRRS values defined by PCI Express specification. Link: http://lkml.kernel.org/r/1469125134-16523-6-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio/tsi721_dma: add channel mask and queue size parametersAlexandre Bounine
Add module parameters to allow load time configuration of DMA channels. Depending on application, performance of DMA data transfers can benefit from adjusted sizes of buffer descriptor ring and/or transaction requests queue. Having HW DMA channel selector mask allows to define which channels (from seven available) are controlled by the mport device driver and reserve some of them for direct use by other drivers. Link: http://lkml.kernel.org/r/1469125134-16523-5-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: fix return value description for dma_prep functionsAlexandre Bounine
Update return value description for rio_dma_prep_... functions to include error-valued pointer that can be returned by HW mport device drivers. Return values from these functions must be checked using IS_ERR_OR_NULL macro. This patch is applicable to kernel versions starting from v4.6-rc1. Link: http://lkml.kernel.org/r/1469125134-16523-4-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: remove unnecessary 0x prefixes before %pa extension usesJoe Perches
Patch series "RapidIO subsystem updates". This set of patches contains RapidIO subsystem fixes and updates that have been made since kernel v4.6. The most significant update brings changes related to the latest revision of RapidIO specification (rev.3.x) and introduction of next generation of RapidIO switches by IDT (RXS1632 and RXS2448). This patch (of 13): This is RapidIO part of the original patch submitted by Joe Perches. (see: https://lkml.org/lkml/2016/3/5/19) Since commit 3cab1e711297 ("lib/vsprintf: refactor duplicate code to special_hex_number()") %pa uses have been output with a 0x prefix. These 0x prefixes in the formats are unnecessary. Link: http://lkml.kernel.org/r/1469125134-16523-2-git-send-email-alexandre.bounine@idt.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: add RapidIO channelized messaging driverAlexandre Bounine
Add channelized messaging driver to support native RapidIO messaging exchange between multiple senders/recipients on devices that use kernel RapidIO subsystem services. This device driver is the result of collaboration within the RapidIO.org Software Task Group (STG) between Texas Instruments, Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was received from other members of RapidIO.org. The objective was to create a character mode driver interface which exposes messaging capabilities of RapidIO endpoint devices (mports) directly to applications, in a manner that allows the numerous and varied RapidIO implementations to interoperate. This char mode device driver allows user-space applications to setup messaging communication channels using single shared RapidIO messaging mailbox. By default this driver uses RapidIO MBOX_1 (MBOX_0 is reserved for use by RIONET Ethernet emulation driver). [weiyj.lk@gmail.com: rapidio/rio_cm: fix return value check in riocm_init()] Link: http://lkml.kernel.org/r/1469198221-21970-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1468952862-18056-1-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-05rapidio/mport_cdev: fix uapi type definitionsAlexandre Bounine
Fix problems in uapi definitions reported by Gabriel Laskar: (see https://lkml.org/lkml/2016/4/5/205 for details) - move public header file rio_mport_cdev.h to include/uapi/linux directory - change types in data structures passed as IOCTL parameters - improve parameter checking in some IOCTL service routines Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Reported-by: Gabriel Laskar <gabriel@lse.epita.fr> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Gabriel Laskar <gabriel@lse.epita.fr> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-28rapidio: fix potential NULL pointer dereferenceVladimir Zapolskiy
The change fixes improper check for a returned error value by class_create() function, which on error returns ERR_PTR() value, thus the original check always results in a dead code on error path. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-02Convert straggling drivers to new six-argument get_user_pages()Linus Torvalds
Commit d4edcf0d5695 ("mm/gup: Switch all callers of get_user_pages() to not pass tsk/mm") switched get_user_pages() callers to the simpler model where they no longer pass in the thread and mm pointer. But since then we've merged changes to a few drivers that re-introduce use of the old interface. Let's fix them up. They continued to work fine (thanks to the truly disgusting macros introduced in commit cde70140fed8: "mm/gup: Overload get_user_pages() functions"), but cause unnecessary build noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: add mport char device driverAlexandre Bounine
Add mport character device driver to provide user space interface to basic RapidIO subsystem operations. See included Documentation/rapidio/mport_cdev.txt for more details. [akpm@linux-foundation.org: fix printk warning on i386] [dan.carpenter@oracle.com: mport_cdev: fix some error codes] Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721_dma: fix hardware error handlingAlexandre Bounine
Add DMA channel re-initialization after an error to avoid termination of all pending transfer requests. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Reported-by: Barry Wood <barry.wood@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721_dma: fix synchronization issuesAlexandre Bounine
Fix synchronization issues found during testing using multiple DMA transfer requests to the same channel: - lost MSI-X interrupt notifications - non-synchronized attempts to start DMA channel HW resulting in error message from the driver - cookie tracking/update race conditions resulting in incorrect DMA transfer status report Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Reported-by: Barry Wood <barry.wood@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721_dma: update error reporting from prep_sg callbackAlexandre Bounine
Switch to returning error-valued pointer instead of simple NULL pointer. This allows to properly identify situation when request queue is full and therefore gives to upper layer an option to retry operation later. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721: add filtered debug outputAlexandre Bounine
Replace "all-or-nothing" debug output with controlled debug output using functional block masks. This allows run time control of debug messages through 'dbg_level' module parameter. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721: add outbound windows mapping supportAlexandre Bounine
Add device-specific callback functions to support outbound windows mapping and release. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: add outbound window supportAlexandre Bounine
Add RapidIO controller (mport) outbound window configuration operations. This patch is a part of the original patch submitted by Li Yang: https://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/071210.html For some reason the original part was not applied to mainline code tree. The inbound window mapping part has been applied later during tsi721 mport driver submission. Now goes the second part with corresponding HW support. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721: fix locking in OB_MSG processingAlexandre Bounine
- Add spinlock protection into outbound message queuing routine. - Change outbound message interrupt handler to avoid deadlock when calling registered callback routine. - Allow infinite retries for outbound messages to avoid retry threshold error signaling in systems with nodes that have slow message receive queue processing. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: add global inbound port write interfacesAlexandre Bounine
Add new Port Write handler registration interfaces that attach PW handlers to local mport device objects. This is different from old interface that attaches PW callback to individual RapidIO device. The new interfaces are intended for use for common event handling (e.g. hot-plug notifications) while the old interface is available for individual device drivers. This patch is based on patch proposed by Andre van Herk but preserves existing per-device interface and adds lock protection for list handling. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: move rio_pw_enable into core codeAlexandre Bounine
Make rio_pw_enable() routine available to other RapidIO drivers. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: move rio_local_set_device_id function to the common coreAlexandre Bounine
Make function rio_local_set_device_id() common for all components of RapidIO subsystem. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: add lock protection for doorbell listAlexandre Bounine
Add lock protection around doorbell list handling to prevent list corruption on SMP platforms. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721: add HW specific mport removalAlexandre Bounine
Add hardware-specific device removal support for Tsi721 PCIe-to-RapidIO bridge. To avoid excessive data type conversions, parameters passed to some internal functions have been revised. Dynamic memory allocations of rio_mport and rio_ops have been replaced to reduce references between data structures. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: add core mport removal supportAlexandre Bounine
Add common mport removal support functions into the RapidIO subsystem core. Changes to the existing mport registration process have been made to avoid race conditions with active subsystem interfaces immediately after mport device registration: part of initialization code from rio_register_mport() have been moved into separate function rio_mport_initialize() to allow to perform mport registration as the final step of setup process. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: move net allocation into core codeAlexandre Bounine
Make net allocation/release routines available to all components of RapidIO subsystem by moving code from rio-scan enumerator. Make destination ID allocation method private to existing enumerator because other enumeration methods can use their own algorithm. Setup net device object as a parent of all RapidIO devices residing in it and register net as a child of active mport device. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: rework common RIO device add/delete routinesAlexandre Bounine
This patch moves per-net device list handling from rio-scan to common RapidIO core and adds a matching device deletion routine. This makes device object creation/removal available to other implementations of enumeration/discovery process. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721: add shutdown notification callbackAlexandre Bounine
Add device driver specific shutdown notification callback. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: add shutdown notification for RapidIO devicesAlexandre Bounine
Add bus-specific callback to stop RapidIO devices during a system shutdown. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721: add query_mport callbackAlexandre Bounine
Add device-specific implementation of query_mport callback function. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio: add query_mport operationAlexandre Bounine
Add mport query operation to report master port RapidIO capabilities and run time configuration to upper level drivers. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721_dma: fix pending transaction queue handlingAlexandre Bounine
Fix pending DMA request queue handling to avoid broken ordering during concurrent request submissions. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721: add option to configure direct mapping of IB windowAlexandre Bounine
Add an option to configure mapping of Inbound Window without RIO-to-PCIe address translation. If a local memory buffer is not properly aligned to meet HW requirements for RapidIO address mapping with address translation, caller can request an inbound window with matching RapidIO address assigned to it. This implementation selects RapidIO base address and size for inbound window that are capable to accommodate the local memory buffer. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721: add check for overlapped IB window mappingsAlexandre Bounine
Add check for attempts to request mapping of inbound RapidIO address space that overlaps with existing active mapping windows. Tsi721 device does not support overlapped inbound windows and SRIO address decoding behavior is not defined in such cases. This patch is applicable to kernel versions starting from v3.7. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22rapidio/tsi721: fix hardcoded MRRS settingAlexandre Bounine
Remove use of hardcoded setting for Maximum Read Request Size (MRRS) value and use one set by PCIe bus driver. Using hardcoded value can cause PCIe bus errors on platforms that have tsi721 device on PCIe path that allows only smaller read request sizes. This fix is applicable to kernel versions starting from v3.2. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-30drivers: Initialize resource entry to zeroToshi Kani
I/O resource descriptor, 'desc' in struct resource, needs to be initialized to zero by default. Some drivers call kmalloc() to allocate a resource entry, but do not initialize it to zero by memset(). Change these drivers to call kzalloc(), instead. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Helge Deller <deller@gmx.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-acpi@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mm <linux-mm@kvack.org> Cc: linux-parisc@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-sh@vger.kernel.org Link: http://lkml.kernel.org/r/1453841853-11383-10-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-20rapidio: use kobj_to_dev()Geliang Tang
Use kobj_to_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: "Bounine, Alexandre" <Alexandre.Bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "As usual, mostly comment, kerneldoc and printk() fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: lpfc: Grammar s/an negative/a negative/ ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/ cx25821: cx25821-medusa-reg.h: fix 0x0x prefix lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants rapidio: Fix kerneldoc and comment qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config() treewide: Kconfig: fix wording / spelling usb/serial: fix grammar in Kconfig help text for FTDI_SIO megaraid_sas: fix kerneldoc netfilter: ebtables: fix comment grammar drm/radeon: fix comment isdn: fix grammar in comment ARM: KVM: fix comment
2015-05-26rapidio: Fix kerneldoc and commentMasanari Iida
This patch fix spelling typos found in DocBook/rapidio.xml Ths file was generated from comments in the source files, I had to fix them, instead of the xml file. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This update brings: - the big cleanup up by Maxime for device control and slave capabilities. This makes the API much cleaner. - new IMG MDC driver by Andrew - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with bunch of fixes on rcar drivers - odd fixes and updates spread over driver" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits) dmaengine: pl330: add DMA_PAUSE feature dmaengine: pl330: improve pl330_tx_status() function dmaengine: rcar-dmac: Disable channel 0 when using IOMMU dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR dmaengine: rcar-dmac: Fix spinlock issues in interrupt dmaenegine: edma: fix sparse warnings dmaengine: rcar-dmac: Fix uninitialized variable usage dmaengine: shdmac: extend PM methods dmaengine: shdmac: use SET_RUNTIME_PM_OPS() dmaengine: pl330: fix bug that cause start the same descs in cyclic dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers dmaengine: at_xdmac: simplify channel configuration stuff dmaengine: at_xdmac: introduce save_cc field dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel ioat: fail self-test if wait_for_completion times out dmaengine: dw: define DW_DMA_MAX_NR_MASTERS dmaengine: dw: amend description of dma_dev field dmatest: move src_off, dst_off, len inside loop ...
2015-01-27rapidio/tsi721: use PCI define for Max_Read_Request_SizeRafał Miłecki
Replace a magic number with a PCI #define symbol. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
2014-12-22dmaengine: rapidio: tsi721: Rename device_controlMaxime Ripard
Rename the device_control callback of the TXX9 DMA driver to terminate_all since it's all it's really doing. That will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-08rapidio/tsi721_dma: rework scatter-gather list handlingAlexandre Bounine
Rework Tsi721 RapidIO DMA engine support to allow handling data scatter/gather lists longer than number of hardware buffer descriptors in the DMA channel's descriptor list. The current implementation of Tsi721 DMA transfers requires that number of entries in a scatter/gather list provided by a caller of dmaengine_prep_rio_sg() should not exceed number of allocated hardware buffer descriptors. This patch removes the limitation by processing long scatter/gather lists by sections that can be transferred using hardware descriptor ring of configured size. It also introduces a module parameter "dma_desc_per_channel" to allow run-time configuration of Tsi721 hardware buffer descriptor rings. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Stef van Os <stef.van.os@prodrive-technologies.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>