summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2016-08-10pinctrl: intel: merrifield: Add missed headerAndy Shevchenko
On x86 builds the absense of <linux/io.h> makes static analyzer and compiler unhappy which fails to build the driver. CHECK drivers/pinctrl/intel/pinctrl-merrifield.c drivers/pinctrl/intel/pinctrl-merrifield.c:518:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:570:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:575:9: error: undefined identifier 'writel' drivers/pinctrl/intel/pinctrl-merrifield.c:645:17: error: undefined identifier 'readl' CC drivers/pinctrl/intel/pinctrl-merrifield.o drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_pin_dbg_show’: drivers/pinctrl/intel/pinctrl-merrifield.c:518:10: error: implicit declaration of function ‘readl’ [-Werror=implicit-function-declaration] value = readl(bufcfg); ^ drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_update_bufcfg’: drivers/pinctrl/intel/pinctrl-merrifield.c:575:2: error: implicit declaration of function ‘writel’ [-Werror=implicit-function-declaration] writel(value, bufcfg); ^ cc1: some warnings being treated as errors Add header to the top of the module. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl/amd: Remove the default de-bounce timeAgrawal, Nitesh-kumar
In the function amd_gpio_irq_enable() and amd_gpio_direction_input(), remove the code which is setting the default de-bounce time to 2.75ms. The driver code shall use the same settings as specified in BIOS. Any default assignment impacts TouchPad behaviour when the LevelTrig is set to EDGE FALLING. Cc: stable@vger.kernel.org Reviewed-by:  Ken Xue <Ken.Xue@amd.com> Signed-off-by: Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl: pistachio: Drop pinctrl_unregister for devm_ registered deviceWei Yongjun
It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl: meson: Drop pinctrl_unregister for devm_ registered deviceWei Yongjun
It's not necessary to unregister pin controller device registered with devm_pinctrl_register() and using pinctrl_unregister() leads to a double free. This is detected by Coccinelle semantic patch. Fixes: e649f7ec8c5f ("pinctrl: meson: Use devm_pinctrl_register() for pinctrl registration") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-28Merge tag 'pinctrl-v4.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.8 kernel cycle. Nothing stands out as especially exiting: new drivers, new subdrivers, lots of cleanups and incremental features. Business as usual. New drivers: - New driver for Oxnas pin control and GPIO. This ARM-based chipset is used in a few storage (NAS) type devices. - New driver for the MAX77620/MAX20024 pin controller portions. - New driver for the Intel Merrifield pin controller. New subdrivers: - New subdriver for the Qualcomm MDM9615 - New subdriver for the STM32F746 MCU - New subdriver for the Broadcom NSP SoC. Cleanups: - Demodularization of bool compiled-in drivers. Apart from this there is just regular incremental improvements to a lot of drivers, especially Uniphier and PFC" * tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits) pinctrl: fix pincontrol definition for marvell pinctrl: xway: fix typo Revert "pinctrl: amd: make it explicitly non-modular" pinctrl: iproc: Add NSP and Stingray GPIO support pinctrl: Update iProc GPIO DT bindings pinctrl: bcm: add OF dependencies pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe() pinctrl: Add STM32F746 MCU support pinctrl: intel: Protect set wake flow by spin lock pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe() pinctrl: uniphier: add Ethernet pin-mux settings sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code pinctrl: ns2: fix return value check in ns2_pinmux_probe() pinctrl: qcom: update DT bindings with ebi2 groups pinctrl: qcom: establish proper EBI2 pin groups pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro Documentation: dt: Add new compatible to STM32 pinctrl driver bindings includes: dt-bindings: Add STM32F746 pinctrl DT bindings pinctrl: sunxi: fix nand0 function name for sun8i pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11 ...
2016-07-26Merge tag 'gpio-v4.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.8 kernel cycle. The big news is the completion of the chardev ABI which I'm very happy about and apart from that it's an ordinary, quite busy cycle. The details are below. The patches are tested in linux-next for some time, patches to other subsystem mostly have ACKs. I got overly ambitious with configureing lines as input for IRQ lines but it turns out that some controllers have their interrupt-enable and input-enabling in orthogonal settings so the assumption that all IRQ lines are input lines does not hold. Oh well, revert and back to the drawing board with that. Core changes: - The big item is of course the completion of the character device ABI. It has now replaced and surpassed the former unmaintainable sysfs ABI: we can now hammer (bitbang) individual lines or sets of lines and read individual lines or sets of lines from userspace, and we can also register to listen to GPIO events from userspace. As a tie-in we have two new tools in tools/gpio: gpio-hammer and gpio-event-mon that illustrate the proper use of the new ABI. As someone said: the wild west days of GPIO are now over. - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB Kconfig symbols. I'm patching hexagon, openrisc, powerpc, sh, unicore, ia64 and microblaze. These are either ACKed by their maintainers or patched anyways after a grace period and no response from maintainers. Some archs (ARM) come in from their trees, and others (x86) are still not fixed, so I might send a second pull request to root it out later in this merge window, or just defer to v4.9. - The GPIO tools are moved to the tools build system. New drivers: - New driver for the MAX77620/MAX20024. - New driver for the Intel Merrifield. - Enabled PCA953x for the TI PCA9536. - Enabled PCA953x for the Intel Edison. - Enabled R8A7792 in the RCAR driver. Driver improvements: - The STMPE and F7188x now supports the .get_direction() callback. - The Xilinx driver supports setting multiple lines at once. - ACPI support for the Vulcan GPIO controller. - The MMIO GPIO driver supports device tree probing. - The Acer One 10 is supported through the _DEP ACPI attribute. Cleanups: - A major cleanup of the OF/DT support code. It is way easier to read and understand now, probably this improves performance too. - Drop a few redundant .owner assignments. - Remove CLPS711x boardfile support: we are 100% DT" * tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits) MAINTAINERS: Add INTEL MERRIFIELD GPIO entry gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata() gpio: merrifield: Protect irq_ack() and gpio_set() by lock gpio: merrifield: Introduce GPIO driver to support Merrifield gpio: intel-mid: Make it depend to X86_INTEL_MID gpio: intel-mid: Sort header block alphabetically gpio: intel-mid: Remove potentially harmful code gpio: rcar: add R8A7792 support gpiolib: remove duplicated include from gpiolib.c Revert "gpio: convince line to become input in irq helper" gpiolib: of_find_gpio(): Don't discard errors gpio: of: Allow overriding the device node gpio: free handles in fringe cases gpio: tps65218: Add platform_device_id table gpio: max77620: get gpio value based on direction gpio: lynxpoint: avoid potential warning on error path tools/gpio: add install section tools/gpio: move to tools buildsystem gpio: intel-mid: switch to devm_gpiochip_add_data() gpio: 74x164: Use spi_write() helper instead of open coding ...
2016-07-24pinctrl: fix pincontrol definition for marvellAndreas Klinger
On Marvell mv88f6180 with pin control driver one can not use multi purpose pins 35 through 44. I'm using this controller on an embedded board and i found that the pin multiplexing is not the same as in the hardware spezification. This patch alters the pin description so that mpp pins 0 to 19 as well as 35 to 44 are usable. Pin settings i used can be found here: http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf Signed-off-by: Andreas Klinger <ak@it-klinger.de> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22pinctrl: xway: fix typoLinus Walleij
A typo in the previous commit to this file needs fixing. Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 6b4316aecec0 ("pinctrl: xway: Change structure initialisation to c99 style") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22Revert "pinctrl: amd: make it explicitly non-modular"Paul Gortmaker
This reverts commit b8c2b10a9bc0272a20e096852f8fbbf361749dda. This patch was in my queue at the same time that a conversion of the same driver from bool --> tristate was pending and merged. That is commit 337ea0fb1535 ("pinctrl: Turn AMD support to tristate") Normally the conflict would show up in the build coverage I do, however in this case an avoidable instance of linux/module.h in linux/gpio/driver.h (!) causes the build failure to be masked and instead the tristate gets built-in even for selected "=m". In working on removing module.h from driver.h this issue was then revealed (along with other implicit module.h assumptions in gpio, and mfd -- which will be fixed separately.) Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22pinctrl: iproc: Add NSP and Stingray GPIO supportRay Jui
The iProc GPIO controller is shared among multiple iProc based SoCs. In the NSP integration, the drive strength pinctrl function is disabled. In the integration of Stingray, pinctrl is handled by another block and this GPIO controller is solely used as a GPIO controller, and therefore should not be registered to the pinconf framework This patch introduces new SoC specific compatible strings "brcm,iproc-nsp-gpio" for NSP with drive strength feature disabled and "brcm,iproc-stingray-gpio" for Stingray with all PINCONF features disabled This patch is developed based on the initial work from Yendapally Reddy Dhananjaya <yendapally.reddy@broadcom.com> who attempted to disable drive strength configuration for the iProc based NSP chip. In addition, Pramod Kumar <pramod.kumar@broadcom.com> also contributed to make the support more generic across all currently supported PINCONF functions in the iProc GPIO/PINCONF driver Signed-off-by: Pramod Kumar <pramodku@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22pinctrl: bcm: add OF dependenciesArnd Bergmann
Building without CONFIG_OF gives us these warnings for the broadcom pinctrl drivers: drivers/pinctrl/bcm/pinctrl-nsp-mux.c:356:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function) drivers/pinctrl/bcm/pinctrl-cygnus-mux.c:739:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function) The function is only available when CONFIG_OF is set, so we should add a Kconfig dependency for both drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: Add STM32F746 MCU supportAlexandre TORGUE
This patch which adds STM32F746 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: intel: Protect set wake flow by spin lockAndy Shevchenko
It seems intel_gpio_irq_wake() misses lock protection against I/O flow. Use spin lock here as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe()Wei Yongjun
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: uniphier: add Ethernet pin-mux settingsMasahiro Yamada
Add the following Ethernet interfaces: PH1-LD4: MII, RMII PH1-Pro4: MII, RMII, RGMII PH1-sLD8: MII, RMII (Built-in PHY is also supported) ProXstream2: MII, RMII, RGMII PH1-LD6b: RMII, RGMII PH1-LD11: RMII (Built-in PHY is also supported) PH1-LD20: RMII, RGMII Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the codeWei Yongjun
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: ns2: fix return value check in ns2_pinmux_probe()Wei Yongjun
In case of error, the function pinctrl_register() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-08pinctrl: qcom: establish proper EBI2 pin groupsLinus Walleij
After some digging around I found documentation (!) of the APQ8060 EBI2 pin groups. It turns out I first need to split the group in two: ebi2cs and ebi2 proper. The chip select pins are kind of orthogonal to the other EBI2 pins since CS1B and CS2B can be muxed over address bits 7 and 6 (don't know why, but they can). This is good to fix up before we add users. Also found what the "holes" in the assignment all the way up to gpio158 was actually for. All mux documentation comes from "Snapdragon(TM) S3 APQ8060-based DragonBoard(TM) GPIO User Guide Rev. E August 10, 2012", published by Bsquare Corporation. As the documentation seems a bit hard to come by I put some comments in the group definitions so that it is clear to all readers what is going on here and what the lines are used for. Cc: Björn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-06pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macroFabio Estevam
Commit e2756baa4217 ("pinctrl: imx21: make it explicitly non-modular") missed the removal of the MODULE_DEVICE_TABLE() macro causing the following build error: drivers/pinctrl/freescale/pinctrl-imx21.c:328:1: error: data definition has no type or storage class [-Werror] MODULE_DEVICE_TABLE(of, imx21_pinctrl_of_match); ,so remove the macro to fix this problem. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-05pinctrl: sunxi: fix nand0 function name for sun8iIcenowy Zheng
In sun4/5/6/7i, all the pin function related to NAND0 controller is named "nand0". However, in sun8i, some of the functions are named as "nand". This patch renamed them to "nand0", for the consistency. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-04pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11Masahiro Yamada
This SoC has no SD card controller. Nor does it have USB port3. These pin-mux settings have no point. Fixes: 70f2f9c4cf25 ("pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-03pinctrl: qcom: add support for EBI2Linus Walleij
Add support to mux in the second external bus interface as follows: - CS1 and CS2 on GPIO39 and GPIO40 as func 2 - ADDR_7 thru ADDR_0 on GPIO123 thru GPIO130 as func 1 - CS4, CS3 and CS0 on GPIO132, GPIO133, GPIO134 as func 1 - DATA_15 thru DATA_0 on GPIO135 thru GPIO150 as func 1 - OE on GPIO151 as func 1 - ADV on GPIO153 as func 1 - WE on GPIO157 as func 1 This external bus is used on the APQ8060 Dragonboard to connect an external SMSC9211 ethernet adapter, but there are many other usecases for the EBI2. Cc: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: qcom: msm8974: Add hsic_ctl pinmuxStephen Boyd
The msm8974 pinctrl variant has a couple USB HSIC "glue" registers that let us mux between the pinctrl register settings or the HSIC core settings for the HSIC pins (gpio 144 and gpio 145). Support this method of operation by adding hsic_data and hsic_strobe pins that can select between hsic_ctl and gpio functions. This allows us to toggle the hsic pin configuration over to the HSIC core at runtime. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: qcom: Clear all function selection bitsStephen Boyd
The function selection bitfield is not always 3 bits wide. Sometimes it is 4 bits wide. Let's use the npins struct member to determine how many bits wide the function selection bitfield is so we clear the correct amount of bits in the register while remuxing the pins. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: qcom: Add support for MDM9615 TLMMNeil Armstrong
In order to support the Qualcomm MDM9615 SoC, add support for the TLMM using the Qualcomm pinctrl generic driver. Note: the pinctrl is partial, need Documentation to complete all the groups. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: sirf: atlas7: Add missing of_node_putAmitoj Kaur Chawla
of_find_node_by_name does an of_node_get on its return value, so an of_node_put is needed on this value before the corresponding variable goes out of scope. The Coccinelle semantic patch used to make this change is as follows: @@ struct device_node *n; struct device_node *n1; statement S; identifier f; expression E; constant C; @@ n = of_find_node_by_name(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f(n,...) when != E = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n1 = f(n,...) | E = n | return ...; ) Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: nsp: add pinmux driver support for Broadcom NSP SoCYendapally Reddy Dhananjaya Reddy
This adds the initial support of the Broadcom NSP pinmux driver. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29Merge tag 'sh-pfc-for-v4.8-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.8 - Voltage switching support for R-Car H3, - DRIF pin support for R-Car H3, - Cleanups and fixes.
2016-06-29pinctrl: intel: Add Intel Merrifield pin controller supportAndy Shevchenko
This driver adds pinctrl support for Intel Merrifield. The IP block which is called Family-Level Interface Shim is a separate entity in SoC. The GPIO driver (gpio-intel-mid.c) will be updated accordingly to support pinctrl interface. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: remove orphaned exported ".remove" functionPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_MXS drivers/pinctrl/freescale/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. It also doesn't have any modular functionality, so it doesn't need module.h included at all. What it does have is an exported function that was used as a shared ".remove" by other drivers, but those use cases (imx23 and imx28) are now gone, and hence this can disappear as well. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx28: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX28 drivers/pinctrl/freescale/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx23: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX23 drivers/pinctrl/freescale/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init wasn't actually used by this driver, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: vf610: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_VF610 drivers/pinctrl/freescale/Kconfig: bool "Freescale Vybrid VF610 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init wasn't in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx7d: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX7D drivers/pinctrl/freescale/Kconfig: bool "IMX7D pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Anson Huang <Anson.Huang@freescale.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx6ul: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6UL drivers/pinctrl/freescale/Kconfig: bool "IMX6UL pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Anson Huang <Anson.Huang@freescale.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx6sx: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6SX drivers/pinctrl/freescale/Kconfig: bool "IMX6SX pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Anson Huang <Anson.Huang@freescale.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx6sl: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6SL drivers/pinctrl/freescale/Kconfig: bool "IMX6SL pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx6q: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6Q drivers/pinctrl/freescale/Kconfig: bool "IMX6Q/DL pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. But we do add export.h since this file uses the global THIS_MODULE. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx6dl: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6Q drivers/pinctrl/freescale/Kconfig: bool "IMX6Q/DL pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx53: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX53 drivers/pinctrl/freescale/Kconfig: bool "IMX53 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx51: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX51 drivers/pinctrl/freescale/Kconfig: bool "IMX51 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx50: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX50 drivers/pinctrl/freescale/Kconfig: bool "IMX50 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx35: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX35 drivers/pinctrl/freescale/Kconfig: bool "IMX35 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx27: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX27 drivers/pinctrl/freescale/Kconfig: bool "IMX27 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx25: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX25 drivers/pinctrl/freescale/Kconfig: bool "IMX25 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Denis Carikli <denis@eukrea.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx21: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX21 drivers/pinctrl/freescale/Kconfig: bool "i.MX21 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: imx1: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX1 drivers/pinctrl/freescale/Kconfig: bool "IMX1 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: freescale: remove needless module.h includePaul Gortmaker
None of these files have anything modular in them, so they don't need to be bringing in module.h and all its dependencies. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23Merge branch 'devel-dt-free-map' into develLinus Walleij