summaryrefslogtreecommitdiff
path: root/drivers/net/virtio_net.c
AgeCommit message (Collapse)Author
2016-07-19virtio-net: Remove more stack DMAAndy Lutomirski
VLAN and MQ control was doing DMA from the stack. Fix it. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org> Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14virtio_net: fix csum generation for virtio-net devicesMike Rapoport
The commit e858fae2b0b8 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion") replaced the tun code for header manipulation with the generic helpers. While doing so, it implictly moved the skb_partial_csum_set() invocation after eth_type_trans(), which invalidate the current gso start/offset values. Fix it by moving the helper invocation before the mac pulling. Fixes: e858fae2b0b8 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion") Reported-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10virtio_net: use common code for virtio_net_hdr and skb GSO conversionMike Rapoport
Replace open coded conversion between virtio_net_hdr to skb GSO info with virtio_net_hdr_{from,to}_skb Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-06virtio-net: Add initial MTU advice featureAaron Conole
This commit adds the feature bit and associated mtu device entry for the virtio network device. When a virtio device comes up, it checks the feature bit for the VIRTIO_NET_F_MTU feature. If such feature bit is enabled, the driver will read the advised MTU and use it as the initial value. Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recvwangyunjian
In function virtnet_open() and virtnet_probe(), func try_fill_recv() may be executed at the same time. VQ in virtqueue_add() has not been protected well and BUG_ON will be triggered when virito_net.ko being removed. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost updates from Michael Tsirkin: "New features, performance improvements, cleanups: - basic polling support for vhost - rework virtio to optionally use DMA API, fixing it on Xen - balloon stats gained a new entry - using the new napi_alloc_skb speeds up virtio net - virtio blk stats can now be read while another VCPU is busy inflating or deflating the balloon plus misc cleanups in various places" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_net: replace netdev_alloc_skb_ip_align() with napi_alloc_skb() vhost_net: basic polling support vhost: introduce vhost_vq_avail_empty() vhost: introduce vhost_has_work() virtio_balloon: Allow to resize and update the balloon stats in parallel virtio_balloon: Use a workqueue instead of "vballoon" kthread virtio/s390: size of SET_IND payload virtio/s390: use dev_to_virtio vhost: rename vhost_init_used() vhost: rename cross-endian helpers virtio_blk: VIRTIO_BLK_F_WCE->VIRTIO_BLK_F_FLUSH vring: Use the DMA API on Xen virtio_pci: Use the DMA API if enabled virtio_mmio: Use the DMA API if enabled virtio: Add improved queue allocation API virtio_ring: Support DMA APIs vring: Introduce vring_use_dma_api() s390/dma: Allow per device dma ops alpha/dma: use common noop dma ops dma: Provide simple noop dma ops
2016-03-17virtio_net: replace netdev_alloc_skb_ip_align() with napi_alloc_skb()Paolo Abeni
This gives small but noticeable rx performance improvement (2-3%) and will allow exploiting future napi improvement. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-11virtio_net: validate ethtool port setting and explain the user validationNikolay Aleksandrov
We should validate the port setting that we got from the user and check if it's what we've set it to (PORT_OTHER), also add explanation that ignoring advertising is good as long as we don't have autonegotiation. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-07virtio_net: add ethtool support for set and get of settingsNikolay Aleksandrov
This patch allows the user to set and retrieve speed and duplex of the virtio_net device via ethtool. Having this functionality is very helpful for simulating different environments and also enables the virtio_net device to participate in operations where proper speed and duplex are required (e.g. currently bonding lacp mode requires full duplex). Custom speed and duplex are not allowed, the user-supplied settings are validated before applying. Example: $ ethtool eth1 Settings for eth1: ... Speed: Unknown! Duplex: Unknown! (255) $ ethtool -s eth1 speed 1000 duplex full $ ethtool eth1 Settings for eth1: ... Speed: 1000Mb/s Duplex: Full Based on a patch by Roopa Prabhu. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07virtio-net: Stop doing DMA from the stackMichael S. Tsirkin
Once virtio starts using the DMA API, we won't be able to safely DMA from the stack. virtio-net does a couple of config DMA requests from small stack buffers -- switch to using dynamically-allocated memory. This should have no effect on any performance-critical code paths. Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Andy Lutomirski <luto@kernel.org>
2015-11-18net: provide generic busy polling to all NAPI driversEric Dumazet
NAPI drivers no longer need to observe a particular protocol to benefit from busy polling (CONFIG_NET_RX_BUSY_POLL=y) napi_hash_add() and napi_hash_del() are automatically called from core networking stack, respectively from netif_napi_add() and netif_napi_del() This patch depends on free_netdev() and netif_napi_del() being called from process context, which seems to be the norm. Drivers might still prefer to call napi_hash_del() on their own, since they might combine all the rcu grace periods into a single one, knowing their NAPI structures lifetime, while core networking stack has no idea of a possible combining. Once this patch proves to not bring serious regressions, we will cleanup drivers to either remove napi_hash_del() or provide appropriate rcu grace periods combining. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18net: move skb_mark_napi_id() into core networking stackEric Dumazet
We would like to automatically provide busy polling support to all NAPI drivers, without them having to implement anything. skb_mark_napi_id() can be called from napi_gro_receive() and napi_get_frags(). Few drivers are still calling skb_mark_napi_id() because they use netif_receive_skb(). They should eventually call napi_gro_receive() instead. I will leave this to drivers maintainers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27virtio-net: avoid unnecessary sg initialzationJason Wang
Usually an skb does not have up to MAX_SKB_FRAGS frags. So no need to initialize the unuse part of sg. This patch initialize the sg based on the real number it will used: - during xmit, it could be inferred from nr_frags and can_push. - for small receive buffer, it will also be 2. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20virtio_net: use DECLARE_EWMAJohannes Berg
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA() to create static inlines. On x86/64 this results in no change in code size for me, but reduces the struct receive_queue size by the two unsigned long values that store the parameters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07virtio-net: drop NETIF_F_FRAGLISTJason Wang
virtio declares support for NETIF_F_FRAGLIST, but assumes that there are at most MAX_SKB_FRAGS + 2 fragments which isn't always true with a fraglist. A longer fraglist in the skb will make the call to skb_to_sgvec overflow the sg array, leading to memory corruption. Drop NETIF_F_FRAGLIST so we only get what we can handle. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03virtio_net: add gro capabilityEric Dumazet
Straightforward patch to add GRO processing to virtio_net. napi_complete_done() usage allows more aggressive aggregation, opted-in by setting /sys/class/net/xxx/gro_flush_timeout Tested: Setting /sys/class/net/xxx/gro_flush_timeout to 1000 nsec, Rick Jones reported following results. One VM of each on a pair of OpenStack compute nodes with E5-2650Lv3 CPUs and Intel 82599ES-based NICs. So, two "before" and two "after" VMs. The OpenStack compute nodes were running OpenStack Kilo, with VxLAN encapsulation being used through OVS so no GRO coming-up the host stack. The compute nodes themselves were running a 3.14-based kernel. Single-stream netperf, CPU utilizations and thus service demands are based on intra-guest reported CPU. Throughput Mbit/s, bigger is better Min Median Average Max 4.2.0-rc3+ 1364 1686 1678 1938 4.2.0-rc3+flush1k 1824 2269 2275 2647 Send Service Demand, smaller is better Min Median Average Max 4.2.0-rc3+ 0.236 0.558 0.524 0.802 4.2.0-rc3+flush1k 0.176 0.503 0.471 0.738 Receive Service Demand, smaller is better. Min Median Average Max 4.2.0-rc3+ 1.906 2.188 2.191 2.531 4.2.0-rc3+flush1k 0.448 0.529 0.533 0.692 Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Rick Jones <rick.jones2@hp.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20virtio_net: don't require ANY_LAYOUT with VERSION_1Michael S. Tsirkin
ANY_LAYOUT is a compatibility feature. It's implied for VERSION_1 devices, and non-transitional devices might not offer it. Change code to behave accordingly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06virtio: document queue state logicMichael S. Tsirkin
commit d631b94e7a15277858ec5f88d674d93080506999 virtio: change comment in transmit started clarifying the logic behind queue state management, but introduced an inaccuracy: TX_BUSY does not cause a BUG message. Clean this up some more, explaining the tradeoffs in detail. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29virtio: simplify the using of received in virtnet_pollLi RongQing
received is 0, no need to minus it and use "+=" to reassign it Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24virtio: change comment in transmitstephen hemminger
The original comment was not really informative or funny as well as sexist. Replace it with a better explanation of why the driver does stop and what the impacts are. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12virtio-net: correctly delete napi hashJason Wang
We don't delete napi from hash list during module exit. This will cause the following panic when doing module load and unload: BUG: unable to handle kernel paging request at 0000004e00000075 IP: [<ffffffff816bd01b>] napi_hash_add+0x6b/0xf0 PGD 3c5d5067 PUD 0 Oops: 0000 [#1] SMP ... Call Trace: [<ffffffffa0a5bfb7>] init_vqs+0x107/0x490 [virtio_net] [<ffffffffa0a5c9f2>] virtnet_probe+0x562/0x791815639d880be [virtio_net] [<ffffffff8139e667>] virtio_dev_probe+0x137/0x200 [<ffffffff814c7f2a>] driver_probe_device+0x7a/0x250 [<ffffffff814c81d3>] __driver_attach+0x93/0xa0 [<ffffffff814c8140>] ? __device_attach+0x40/0x40 [<ffffffff814c6053>] bus_for_each_dev+0x63/0xa0 [<ffffffff814c7a79>] driver_attach+0x19/0x20 [<ffffffff814c76f0>] bus_add_driver+0x170/0x220 [<ffffffffa0a60000>] ? 0xffffffffa0a60000 [<ffffffff814c894f>] driver_register+0x5f/0xf0 [<ffffffff8139e41b>] register_virtio_driver+0x1b/0x30 [<ffffffffa0a60010>] virtio_net_driver_init+0x10/0x12 [virtio_net] This patch fixes this by doing this in virtnet_free_queues(). And also don't delete napi in virtnet_freeze() since it will call virtnet_free_queues() which has already did this. Fixes 91815639d880 ("virtio-net: rx busy polling support") Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-18Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "OK, this has the big virtio 1.0 implementation, as specified by OASIS. On top of tht is the major rework of lguest, to use PCI and virtio 1.0, to double-check the implementation. Then comes the inevitable fixes and cleanups from that work" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (80 commits) virtio: don't set VIRTIO_CONFIG_S_DRIVER_OK twice. virtio_net: unconditionally define struct virtio_net_hdr_v1. tools/lguest: don't use legacy definitions for net device in example launcher. virtio: Don't expose legacy net features when VIRTIO_NET_NO_LEGACY defined. tools/lguest: use common error macros in the example launcher. tools/lguest: give virtqueues names for better error messages tools/lguest: more documentation and checking of virtio 1.0 compliance. lguest: don't look in console features to find emerg_wr. tools/lguest: don't start devices until DRIVER_OK status set. tools/lguest: handle indirect partway through chain. tools/lguest: insert driver references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: insert device references from the 1.0 spec (4.1 Virtio Over PCI) tools/lguest: rename virtio_pci_cfg_cap field to match spec. tools/lguest: fix features_accepted logic in example launcher. tools/lguest: handle device reset correctly in example launcher. virtual: Documentation: simplify and generalize paravirt_ops.txt lguest: remove NOTIFY call and eventfd facility. lguest: remove NOTIFY facility from demonstration launcher. lguest: use the PCI console device's emerg_wr for early boot messages. lguest: always put console in PCI slot #1. ...
2015-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03Revert "drivers/net: Disable UFO through virtio"Vlad Yasevich
This reverts commit 3d0ad09412ffe00c9afa201d01effdb6023d09b4. Now that GSO functionality can correctly track if the fragment id has been selected and select a fragment id if necessary, we can re-enable UFO on tap/macvap and virtio devices. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-22virtio_net: add software timestamp supportJacob Keller
This patch enables the use of software timestamping via the virtio_net driver. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-21virtio/net: verify device has config spaceMichael S. Tsirkin
Some devices might not implement config space access (e.g. remoteproc used not to - before 3.9). virtio/net needs config space access so make it fail gracefully if not there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-12-30virtio-net: don't do header check for dodgy gso packetsJason Wang
There's no need to do header check for virtio-net since: - Host sets dodgy for all gso packets from guest and check the header. - Host should be prepared for all kinds of evil packets from guest, since malicious guest can send any kinds of packet. So this patch sets NETIF_F_GSO_ROBUST for virtio-net to skip the check. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-22virtio_net: Fix napi poll list corruptionHerbert Xu
The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) breaks virtio_net in an insidious way. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers virtio_net tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in virtio_net. The worst part of this bug is that the list corruption causes other napi users to be moved off-list. In my case I was chasing a stall in IPsec (IPsec uses netif_rx) and I only belatedly realised that it was virtio_net which caused the stall even though the virtio_net poll was still functioning perfectly after IPsec stalled. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09virtio: drop VIRTIO_F_VERSION_1 from driversMichael S. Tsirkin
Core activates this bit automatically now, drop it from drivers that set it explicitly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09virtio_net: enable v1.0 supportMichael S. Tsirkin
Now that we have completed 1.0 support, enable it in our driver. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09virtio_net: disable mac write for virtio 1.0Michael S. Tsirkin
The spec states that mac in config space is only driver-writable in the legacy case. Fence writing it in virtnet_set_mac_address() in the virtio 1.0 case. Suggested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09virtio_net: bigger header when VERSION_1 is setMichael S. Tsirkin
With VERSION_1 virtio_net uses same header size whether mergeable buffers are enabled or not. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-12-09virtio_net: stricter short buffer length checksMichael S. Tsirkin
Our buffer length check is not strict enough for mergeable buffers: buffer can still be shorter that header + address by 2 bytes. Fix that up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-12-09virtio_net: get rid of virtio_net_hdr/skb_vnet_hdrMichael S. Tsirkin
virtio 1.0 doesn't use virtio_net_hdr anymore, and in fact, it's not really useful since virtio_net_hdr_mrg_rxbuf includes that as the first field anyway. Let's drop it, precalculate header len and store within vi instead. This way we can also remove struct skb_vnet_hdr. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2014-12-09virtio_net: pass vi aroundMichael S. Tsirkin
Too many places poke at [rs]q->vq->vdev->priv just to get the vi structure. Let's just pass the pointer around: seems cleaner, and might even be faster. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09virtio_net: v1.0 endiannessMichael S. Tsirkin
Based on patches by Rusty Russell, Cornelia Huck. Note: more code changes are needed for 1.0 support (due to different header size). So we don't advertize support for 1.0 yet. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-21virtio-net: validate features during probeJason Wang
We currently trigger BUG when VIRTIO_NET_F_CTRL_VQ is not set but one of features depending on it is. That's not a friendly way to report errors to hypervisors. Let's check, and fail probe instead. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30drivers/net: Disable UFO through virtioBen Hutchings
IPv6 does not allow fragmentation by routers, so there is no fragmentation ID in the fixed header. UFO for IPv6 requires the ID to be passed separately, but there is no provision for this in the virtio net protocol. Until recently our software implementation of UFO/IPv6 generated a new ID, but this was a bug. Now we will use ID=0 for any UFO/IPv6 packet passed through a tap, which is even worse. Unfortunately there is no distinction between UFO/IPv4 and v6 features, so disable UFO on taps and virtio_net completely until we have a proper solution. We cannot depend on VM managers respecting the tap feature flags, so keep accepting UFO packets but log a warning the first time we do this. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 916e4cf46d02 ("ipv6: reuse ip6_frag_id from ip6_ufo_append_data") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-18Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "One cc: stable commit, the rest are a series of minor cleanups which have been sitting in MST's tree during my vacation. I changed a function name and made one trivial change, then they spent two days in linux-next" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits) virtio-rng: refactor probe error handling virtio_scsi: drop scan callback virtio_balloon: enable VQs early on restore virtio_scsi: fix race on device removal virito_scsi: use freezable WQ for events virtio_net: enable VQs early on restore virtio_console: enable VQs early on restore virtio_scsi: enable VQs early on restore virtio_blk: enable VQs early on restore virtio_scsi: move kick event out from virtscsi_init virtio_net: fix use after free on allocation failure 9p/trans_virtio: enable VQs early virtio_console: enable VQs early virtio_blk: enable VQs early virtio_net: enable VQs early virtio: add API to enable VQs early virtio_net: minor cleanup virtio-net: drop config_mutex virtio_net: drop config_enable virtio-blk: drop config_mutex ...
2014-10-15virtio_net: fix use after freeMichael S. Tsirkin
commit 0b725a2ca61bedc33a2a63d0451d528b268cf975 net: Remove ndo_xmit_flush netdev operation, use signalling instead. added code that looks at skb->xmit_more after the skb has been put in TX VQ. Since some paths process the ring and free the skb immediately, this can cause use after free. Fix by storing xmit_more in a local variable. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15virtio_net: enable VQs early on restoreMichael S. Tsirkin
virtio spec requires drivers to set DRIVER_OK before using VQs. This is set automatically after restore returns, virtio net violated this rule by using receive VQs within restore. To fix, call virtio_device_ready before using VQs. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_net: fix use after free on allocation failureMichael S. Tsirkin
In the extremely unlikely event that driver initialization fails after RX buffers are added, virtio net frees RX buffers while VQs are still active, potentially causing device to use a freed buffer. To fix, reset device first - same as we do on device removal. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_net: enable VQs earlyMichael S. Tsirkin
virtio spec requires drivers to set DRIVER_OK before using VQs. This is set automatically after probe returns, virtio net violated this rule by using receive VQs within probe. To fix, call virtio_device_ready before using VQs. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_net: minor cleanupMichael S. Tsirkin
goto done; done: return; is ugly, it was put there to make diff review easier. replace by open-coded return. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio-net: drop config_mutexMichael S. Tsirkin
config_mutex served two purposes: prevent multiple concurrent config change handlers, and synchronize access to config_enable flag. Since commit dbf2576e37da0fcc7aacbfbb9fd5d3de7888a3c1 workqueue: make all workqueues non-reentrant all workqueues are non-reentrant, and config_enable is now gone. Get rid of the unnecessary lock. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_net: drop config_enableMichael S. Tsirkin
Now that virtio core ensures config changes don't arrive during probing, drop config_enable flag in virtio net. On removal, flush is now sufficient to guarantee that no change work is queued. This help simplify the driver, and will allow setting DRIVER_OK earlier without losing config change notifications. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-09-13virtio_net: pass well-formed sgs to virtqueue_add_*()Rusty Russell
This is the only driver which doesn't hand virtqueue_add_inbuf and virtqueue_add_outbuf a well-formed, well-terminated sg. Fix it, so we can make virtio_add_* simpler. pktgen results: modprobe pktgen echo 'add_device eth0' > /proc/net/pktgen/kpktgend_0 echo nowait 1 > /proc/net/pktgen/eth0 echo count 1000000 > /proc/net/pktgen/eth0 echo clone_skb 100000 > /proc/net/pktgen/eth0 echo dst_mac 4e:14:25:a9:30:ac > /proc/net/pktgen/eth0 echo dst 192.168.1.2 > /proc/net/pktgen/eth0 for i in `seq 20`; do echo start > /proc/net/pktgen/pgctrl; tail -n1 /proc/net/pktgen/eth0; done Before: 746547-793084(786421+/-9.6e+03)pps 346-367(364.4+/-4.4)Mb/sec (346397808-367990976(3.649e+08+/-4.5e+06)bps) errors: 0 After: 767390-792966(785159+/-6.5e+03)pps 356-367(363.75+/-2.9)Mb/sec (356068960-367936224(3.64314e+08+/-3e+06)bps) errors: 0 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28virtio_net: flush when in xmit_more mode and under descriptor pressureDavid S. Miller
Mirror the changes made to ixgbe in commit 2367a17390138f68b3aa28f2f220b8d7ff8d91f4 ("ixgbe: flush when in xmit_more mode and under descriptor pressure") Signed-off-by: David S. Miller <davem@davemloft.net>