summaryrefslogtreecommitdiff
path: root/drivers/memory
AgeCommit message (Collapse)Author
2016-08-08memory: omap-gpmc: allow probe of child nodes to failJohan Hovold
A recent commit (inadvertently?) changed how failed probe of a gpmc child node was handled. Instead of proceeding with setting up any other children as before, a single error now aborts the whole process. This change broke networking on some Overo boards due to probe failing for an unrelated nand node. This second issue should obviously be fixed, but let's restore the old behaviour of allowing child-node probe to fail to avoid further similar breakage on other systems. Fixes: d2d00862dfbb ("memory: omap-gpmc: Support general purpose input for WAITPINs") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com>
2016-08-02Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND: Quoting Boris: 'This pull request contains only one notable change: - Addition of the MTK NAND controller driver And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: - A few fixes/improvements for the xway NAND controller driver - A few fixes for the sunxi NAND controller driver - Support for DMA in the sunxi NAND driver - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs - Addition for bitflips detection in erased pages to the brcmnand driver - Support for new brcmnand IPs - Update of the OMAP-GPMC binding to support DMA channel description' In addition, some small fixes around error handling, etc., as well as one long-standing corner case issue (2.6.20, I think?) with writing 1 byte less than a page. NOR: - rework some error handling on reads and writes, so we can better handle (for instance) SPI controllers which have limitations on their maximum transfer size - add new Cadence Quad SPI flash controller driver - add new Atmel QSPI flash controller driver - add new Hisilicon SPI flash controller driver - support a few new flash, and update supported features on others - fix the logic used for detecting a fully-unlocked flash And other miscellaneous small fixes" * tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits) mtd: spi-nor: don't build Cadence QuadSPI on non-ARM mtd: mtk-nor: remove duplicated include from mtk-quadspi.c mtd: nand: fix bug writing 1 byte less than page size mtd: update description of MTD_BCM47XXSFLASH symbol mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd mtd: pmcmsp-flash: Allocating too much in init_msp_flash() mtd: maps: sa1100-flash: potential NULL dereference mtd: atmel-quadspi: add driver for Atmel QSPI controller mtd: nand: omap2: fix return value check in omap_nand_probe() Documentation: atmel-quadspi: add binding file for Atmel QSPI driver mtd: spi-nor: add hisilicon spi-nor flash controller driver mtd: spi-nor: support dual, quad, and WP for Gigadevice mtd: spi-nor: Added support for n25q00a. memory: Update dependency of IFC for Layerscape mtd: nand: jz4780: Update MODULE_AUTHOR email address mtd: nand: sunxi: prevent a small memory leak mtd: nand: sunxi: add reset line support mtd: nand: sunxi: update DT bindings ...
2016-08-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-08-01Merge tag 'iommu-updates-v4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - big-endian support and preparation for defered probing for the Exynos IOMMU driver - simplifications in iommu-group id handling - support for Mediatek generation one IOMMU hardware - conversion of the AMD IOMMU driver to use the generic IOVA allocator. This driver now also benefits from the recent scalability improvements in the IOVA code. - preparations to use generic DMA mapping code in the Rockchip IOMMU driver - device tree adaption and conversion to use generic page-table code for the MSM IOMMU driver - an iova_to_phys optimization in the ARM-SMMU driver to greatly improve page-table teardown performance with VFIO - various other small fixes and conversions * tag 'iommu-updates-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits) iommu/amd: Initialize dma-ops domains with 3-level page-table iommu/amd: Update Alias-DTE in update_device_table() iommu/vt-d: Return error code in domain_context_mapping_one() iommu/amd: Use container_of to get dma_ops_domain iommu/amd: Flush iova queue before releasing dma_ops_domain iommu/amd: Handle IOMMU_DOMAIN_DMA in ops->domain_free call-back iommu/amd: Use dev_data->domain in get_domain() iommu/amd: Optimize map_sg and unmap_sg iommu/amd: Introduce dir2prot() helper iommu/amd: Implement timeout to flush unmap queues iommu/amd: Implement flush queue iommu/amd: Allow NULL pointer parameter for domain_flush_complete() iommu/amd: Set up data structures for flush queue iommu/amd: Remove align-parameter from __map_single() iommu/amd: Remove other remains of old address allocator iommu/amd: Make use of the generic IOVA allocator iommu/amd: Remove special mapping code for dma_ops path iommu/amd: Pass gfp-flags to iommu_map_page() iommu/amd: Implement apply_dm_region call-back iommu/amd: Create a list of reserved iova addresses ...
2016-07-30Merge tag 'devicetree-for-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - remove most of_platform_populate() calls in arch code. Now the DT core code calls it in the default case and platforms only need to call it if they have special needs - use pr_fmt on all the DT core print statements - CoreSight binding doc improvements to block name descriptions - add dt_to_config script which can parse dts files and list corresponding kernel config options - fix memory leak hit with a PowerMac DT - correct a bunch of STMicro compatible strings to use the correct vendor prefix - fix DA9052 PMIC binding doc to match what is actually used in dts files * tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table" xtensa: Fix build error due to missing include file MIPS: ath79: Add missing include file Fix spelling errors in Documentation/devicetree ARM: dts: fix STMicroelectronics compatible strings powerpc/dts: fix STMicroelectronics compatible strings Documentation: dt: i2c: use correct STMicroelectronics vendor prefix scripts/dtc: dt_to_config - kernel config options for a devicetree of: fdt: mark unflattened tree as detached of: overlay: add resolver error prints coresight: document binding acronyms Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties of: use pr_fmt prefix for all console printing of/irq: Mark initialised interrupt controllers as populated of: fix memory leak related to safe_name() Revert "of/platform: export of_default_bus_match_table" of: unittest: use of_platform_default_populate() to populate default bus memory: omap-gpmc: use of_platform_default_populate() to populate default bus bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus ...
2016-07-26Merge branches 'x86/amd', 'x86/vt-d', 'arm/exynos', 'arm/mediatek', ↵Joerg Roedel
'arm/msm', 'arm/rockchip', 'arm/smmu' and 'core' into next
2016-07-14Merge tag 'samsung-drivers-4.8-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Merge "Samsung drivers/soc update for v4.8, part 3" into next/drivers: 1. Fix size of allocation for Exynos SROM registers (too much was allocated). 2. Constify fix. * tag 'samsung-drivers-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: pmu: Constify arrays with PMU data memory: samsung: exynos-srom: Fix wrong count of registers
2016-07-13memory: Update dependency of IFC for LayerscapeRaghav Dogra
This patch enables IFC NAND support on ARM layerscape platform. It fixes the dependency to enable NAND. The include files are being modified to ensure complilation for both PowerPC and ARM architectures. Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-06Merge tag 'tegra-for-4.8-memory' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers memory: tegra: Changes for v4.8-rc1 Contains three reference count fixes from coccinelle. * tag 'tegra-for-4.8-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: tegra: mc: Add missing of_node_put() memory: tegra: Delete unneeded of_node_put() memory: tegra: tegra124-emc: Add missing of_node_put() Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-06memory: samsung: exynos-srom: Fix wrong count of registersSeung-Woo Kim
This patch fixes wrong count of array for SROM registers from probe function. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-07-05Merge tag 'samsung-drivers-4.8-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Samsung drivers/soc update for v4.8, part 2: 1. Endian-friendly fixes. 2. Make SROMC driver explicitly non-module. * tag 'samsung-drivers-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: cpufreq: s5pv210: use relaxed IO accesors memory: samsung: exynos-srom: make it explicitly non-modular memory: samsung: endian fixes for IO Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-04Merge tag 'gpmc-omap-for-v4.8' of https://github.com/rogerq/linux into ↵Olof Johansson
next/drivers OMAP-GPMC: driver updates for v4.8 * Make GPMC driver non modular as it is going to be built-in only till arch/arm/mach-omap2 users are removed. * Fix build if CONFIG_OF is not defined. * tag 'gpmc-omap-for-v4.8' of https://github.com/rogerq/linux: memory: omap-gpmc: Move gpio functions out of #ifdef CONFIG_OF memory: omap-gpmc: make it explicitly non-modular Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-23memory: omap-gpmc: use of_platform_default_populate() to populate default busKefeng Wang
Use helper of_platform_default_populate() in linux/of_platform when possible, instead of calling of_platform_populate() with the default match table. Acked-by: Roger Quadros <rogerq@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-21memory: atmel-ebi: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/memory/Kconfig:config ATMEL_EBI drivers/memory/Kconfig: bool "Atmel EBI driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the few remaining modular references, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-21memory: atmel-sdramc: make it explicitly non-modularPaul Gortmaker
The Kconfig for this option is currently: config ATMEL_SDRAMC bool "Atmel (Multi-port DDR-)SDRAM Controller" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. An alternate init level might be worth considering at a later date. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-21memory/mediatek: add support for mt2701Honghui Zhang
Mediatek SMI has two generations of HW architecture, mt8173 uses the second generation of SMI HW while mt2701 uses the first generation HW of SMI. There's slight differences between the two generations, for generation 2, the register which control the iommu port access PA or IOVA is at each larb's register base. But for generation 1, the register is at smi ao base(smi always on register base). Besides that, the smi async clock should be prepared and enabled for SMI generation 1 HW to transform the smi clock into emi clock domain, but is not needed for SMI generation 2. This patch add SMI driver for mt2701 which use generation 1 SMI HW. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-20memory: samsung: exynos-srom: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: memory/samsung/Kconfig:config EXYNOS_SROM memory/samsung/Kconfig: bool "Exynos SROM controller driver" if COMPILE_TEST ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-20memory: samsung: endian fixes for IOBen Dooks
Use the relaxed versions of the IO accessors to avoid any issues if running in big endian. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-06-17memory: omap-gpmc: Move gpio functions out of #ifdef CONFIG_OFRoger Quadros
The gpio related functions were mistakenly built only if CONFIG_OF is defined. They are needed even otherwise and will cause build failures if CONFIG_OF is not defined. Move the gpio functions outside #ifdef CONFIG_OF. Fixes: d2d00862dfbb ("memory: omap-gpmc: Support general purpose input for WAITPINs") Signed-off-by: Roger Quadros <rogerq@ti.com>
2016-06-17memory: omap-gpmc: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/memory/Kconfig:config OMAP_GPMC drivers/memory/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We don't replace module.h with init.h since the file already has that. Cc: Roger Quadros <rogerq@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2016-06-16memory: omap-gpmc: Fix omap gpmc EXTRADELAY timingOcquidant, Sebastien
In the omap gpmc driver it can be noticed that GPMC_CONFIG4_OEEXTRADELAY is overwritten by the WEEXTRADELAY value from the device tree and GPMC_CONFIG4_WEEXTRADELAY is not updated by the value from the device tree. As a consequence, the memory accesses cannot be configured properly when the extra delay are needed for OE and WE. Fix the update of GPMC_CONFIG4_WEEXTRADELAY with the value from the device tree file and prevents GPMC_CONFIG4_OEXTRADELAY being overwritten by the WEXTRADELAY value from the device tree. Cc: stable@vger.kernel.org Signed-off-by: Ocquidant, Sebastien <sebastienocquidant@eaton.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
2016-06-14memory: tegra: mc: Add missing of_node_put()Amitoj Kaur Chawla
for_each_child_of_node() performs an of_node_get() on each iteration, so to break out of the loop an of_node_put() is required. Found using Coccinelle. The semantic patch used for this is as follows: // <smpl> @@ expression e; local idexpression n; @@ for_each_child_of_node(..., n) { ... when != of_node_put(n) when != e = n ( return n; | + of_node_put(n); ? return ...; ) ... } // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-14memory: tegra: Delete unneeded of_node_put()Julia Lawall
for_each_child_of_node() performs an of_node_put() on each iteration, so putting an of_node_put() before a continue results in a double put. The semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_get(child) * of_node_put(child); ... * continue; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-14memory: tegra: tegra124-emc: Add missing of_node_put()Amitoj Kaur Chawla
for_each_child_of_node() performs an of_node_get() on each iteration, so to break out of the loop an of_node_put() is required. Found using Coccinelle. The semantic patch used for this is as follows: // <smpl> @@ expression e; local idexpression n; @@ for_each_child_of_node(..., n) { ... when != of_node_put(n) when != e = n ( return n; | + of_node_put(n); ? return ...; ) ... } // </smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-02memory: add Atmel EBI (External Bus Interface) driverBoris Brezillon
The EBI (External Bus Interface) is used to access external peripherals (NOR, SRAM, NAND, and other specific devices like ethernet controllers). Each device is assigned a CS line and an address range and can have its own configuration (timings, access mode, bus width, ...). This driver provides a generic DT binding to configure a device according to its requirements. For specific device controllers (like the NAND one) the SMC timings should be configured by the controller driver through the matrix and smc syscon regmaps. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-05-23Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "Here's the main drm pull request for 4.7, it's been a busy one, and I've been a bit more distracted in real life this merge window. Lots more ARM drivers, not sure if it'll ever end. I think I've at least one more coming the next merge window. But changes are all over the place, support for AMD Polaris GPUs is in here, some missing GM108 support for nouveau (found in some Lenovos), a bunch of MST and skylake fixes. I've also noticed a few fixes from Arnd in my inbox, that I'll try and get in asap, but I didn't think they should hold this up. New drivers: - Hisilicon kirin display driver - Mediatek MT8173 display driver - ARC PGU - bitstreamer on Synopsys ARC SDP boards - Allwinner A13 initial RGB output driver - Analogix driver for DisplayPort IP found in exynos and rockchip DRM Core: - UAPI headers fixes and C++ safety - DRM connector reference counting - DisplayID mode parsing for Dell 5K monitors - Removal of struct_mutex from drivers - Connector registration cleanups - MST robustness fixes - MAINTAINERS updates - Lockless GEM object freeing - Generic fbdev deferred IO support panel: - Support for a bunch of new panels i915: - VBT refactoring - PLL computation cleanups - DSI support for BXT - Color manager support - More atomic patches - GEM improvements - GuC fw loading fixes - DP detection fixes - SKL GPU hang fixes - Lots of BXT fixes radeon/amdgpu: - Initial Polaris support - GPUVM/Scheduler/Clock/Power improvements - ASYNC pageflip support - New mesa feature support nouveau: - GM108 support - Power sensor support improvements - GR init + ucode fixes. - Use GPU provided topology information vmwgfx: - Add host messaging support gma500: - Some cleanups and fixes atmel: - Bridge support - Async atomic commit support fsl-dcu: - Timing controller for LCD support - Pixel clock polarity support rcar-du: - Misc fixes exynos: - Pipeline clock support - Exynoss4533 SoC support - HW trigger mode support - export HDMI_PHY clock - DECON5433 fixes - Use generic prime functions - use DMA mapping APIs rockchip: - Lots of little fixes vc4: - Render node support - Gamma ramp support - DPI output support msm: - Mostly cleanups and fixes - Conversion to generic struct fence etnaviv: - Fix for prime buffer handling - Allow hangcheck to be coalesced with other wakeups tegra: - Gamme table size fix" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits) drm/edid: add displayid detailed 1 timings to the modelist. (v1.1) drm/edid: move displayid validation to it's own function. drm/displayid: Iterate over all DisplayID blocks drm/edid: move displayid tiled block parsing into separate function. drm: Nuke ->vblank_disable_allowed drm/vmwgfx: Report vmwgfx version to vmware.log drm/vmwgfx: Add VMWare host messaging capability drm/vmwgfx: Kill some lockdep warnings drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode drm/nouveau/core: recognise GM108 chipsets drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup drm/nouveau/gr/gk104-: share implementation of ppc exception init drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx drm/nouveau/bios/pll: check BIT table version before trying to parse it drm/nouveau/bios/pll: prevent oops when limits table can't be parsed drm/nouveau/volt/gk104: round up in gk104_volt_set drm/nouveau/fb/gm200: setup mmu debug buffer registers at init() drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init() drm/nouveau/fb/gf100-: allocate mmu debug buffers drm/nouveau/fb: allow chipset-specific actions for oneinit() ...
2016-05-20Merge tag 'char-misc-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here's the big char and misc driver update for 4.7-rc1. Lots of different tiny driver subsystems have updates here with new drivers and functionality. Details in the shortlog. All have been in linux-next with no reported issues for a while" * tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits) mcb: Delete num_cells variable which is not required mcb: Fixed bar number assignment for the gdd mcb: Replace ioremap and request_region with the devm version mcb: Implement bus->dev.release callback mcb: export bus information via sysfs mcb: Correctly initialize the bus's device mei: bus: call mei_cl_read_start under device lock coresight: etb10: adjust read pointer only when needed coresight: configuring ETF in FIFO mode when acting as link coresight: tmc: implementing TMC-ETF AUX space API coresight: moving struct cs_buffers to header file coresight: tmc: keep track of memory width coresight: tmc: make sysFS and Perf mode mutually exclusive coresight: tmc: dump system memory content only when needed coresight: tmc: adding mode of operation for link/sinks coresight: tmc: getting rid of multiple read access coresight: tmc: allocating memory when needed coresight: tmc: making prepare/unprepare functions generic coresight: tmc: splitting driver in ETB/ETF and ETR components coresight: tmc: cleaning up header file ...
2016-05-06memory: mtk-smi: export mtk_smi_larb_get/putPhilipp Zabel
To allow building mediatek-drm.ko as a module, the mtk_smi_larb_get and mtk_smi_larb_put symbols have to be exported. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-01memory: of_memory: Silence uninitialized variable warningDan Carpenter
Presumably we never use the default: case statement which prints a warning message. But my static checker complains that if we do, we will hit an uninitialized variable warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-19mtd: nand: omap2: rely on generic DT parsing done in nand_scan_ident()Boris Brezillon
The core now takes care of parsing generic DT properties in nand_scan_ident() when nand_set_flash_node() has been called. Rely on this initialization instead of calling of_get_nand_xxx() manually. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Roger Quadros <rogerq@ti.com> Tested-by: Franklin S Cooper Jr. <fcooper@ti.com>
2016-04-19mtd/ifc: Add support for IFC controller version 2.0Raghav Dogra
The new IFC controller version 2.0 has a different memory map page. Upto IFC 1.4 PAGE size is 4 KB and from IFC2.0 PAGE size is 64KB. This patch segregates the IFC global and runtime registers to appropriate PAGE sizes. Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Signed-off-by: Raghav Dogra <raghav@freescale.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-18memory: samsung: exynos-srom: Add support for bank configurationPavel Fedin
Implement handling properties in subnodes and adding child devices to the system. Child devices will not be added if configuration fails. Since the driver now does more than suspend-resume support, dependency on CONFIG_PM is removed. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-18memory: Add support for Exynos SROM driverPankaj Dubey
This patch adds Exynos SROM controller driver which will handle save restore of SROM registers during S2R. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [p.fedin@samsung.com: tested on SMDK5410] Tested-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> [k.kozlowski: Minor COMPILE_TEST adjustments in Kconfig entries] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-15memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regsRoger Quadros
GPMC_STATUS register is private to the GPMC module and must not be accessed directly by NAND driver through the gpmc_regs. They must use gpmc_omap_get_nand_ops() instead. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Support WAIT pin edge interruptsRoger Quadros
OMAPs can have 2 to 4 WAITPINs that can be used as edge triggered interrupts if not used for memory wait state insertion. Support these interrupts via the gpmc IRQ domain. The gpmc IRQ domain interrupt map is: 0 - NAND_fifoevent 1 - NAND_termcount 2 - GPMC_WAIT0 edge 3 - GPMC_WAIT1 edge, and so on Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoringRoger Quadros
If the device attached to GPMC wants to use the WAIT pin for WAIT monitoring then we reserve it internally for exclusive use. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Support general purpose input for WAITPINsRoger Quadros
OMAPs can have 2 to 4 WAITPINs that can be used as general purpose input if not used for memory wait state insertion. The first user will be the OMAP NAND chip to get the NAND read/busy status using gpiolib. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Prevent mapping into 1st 16MBRoger Quadros
We have been preventing mapping GPMC children in the first 1MB but really it has to be the first 16MB as the minimum GPMC partition size is 16MB. Also print an error message if CS mapping fails due to DT requesting address outside the GPMC map. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15mtd: nand: omap: Clean up device tree supportRoger Quadros
Move NAND specific device tree parsing to NAND driver. The NAND controller node must have a compatible id, register space resource and interrupt resource. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Implement IRQ domain for NAND IRQsRoger Quadros
GPMC provides 2 interrupts for NAND use. i.e. fifoevent and termcount. Use IRQ domain for this. NAND device tree node can then get the necessary interrupts by using gpmc as the interrupt parent. Legacy boot uses gpmc_get_client_irq to get the NAND interrupts from the GPMC IRQ domain. Get rid of custom bitmasks and use IRQ domain for that as well. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty statusRoger Quadros
This is needed by OMAP NAND driver to poll the empty status of the writebuffer. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15memory: omap-gpmc: Introduce GPMC to NAND interfaceRoger Quadros
The OMAP GPMC module has certain registers dedicated for NAND access and some NAND bits mixed with other GPMC functionality. For the NAND dedicated registers we have the struct gpmc_nand_regs. The NAND driver needs to access NAND specific bits from the following non-dedicated registers - EMPTYWRITEBUFFERSTATUS from GPMC_STATUS For accessing these bits we introduce the struct gpmc_nand_ops. Add gpmc_omap_get_nand_ops() that returns the gpmc_nand_ops along with updating the gpmc_nand_regs. This API will be called by the OMAP NAND driver to access the necessary bits in GPMC register space. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-03-24Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND: - Add sunxi_nand randomizer support - begin refactoring NAND ecclayout structs - fix pxa3xx_nand dmaengine usage - brcmnand: fix support for v7.1 controller - add Qualcomm NAND controller driver SPI NOR: - add new ls1021a, ls2080a support to Freescale QuadSPI - add new flash ID entries - support bottom-block protection for Winbond flash - support Status Register Write Protect - remove broken QPI support for Micron SPI flash JFFS2: - improve post-mount CRC scan efficiency General: - refactor bcm63xxpart parser, to later extend for NAND - add writebuf size parameter to mtdram Other minor code quality improvements" * tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits) mtd: nand: remove kerneldoc for removed function parameter mtd: nand: Qualcomm NAND controller driver dt/bindings: qcom_nandc: Add DT bindings mtd: nand: don't select chip in nand_chip's block_bad op mtd: spi-nor: support lock/unlock for a few Winbond chips mtd: spi-nor: add TB (Top/Bottom) protect support mtd: spi-nor: add SPI_NOR_HAS_LOCK flag mtd: spi-nor: use BIT() for flash_info flags mtd: spi-nor: disallow further writes to SR if WP# is low mtd: spi-nor: make lock/unlock bounds checks more obvious and robust mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region mtd: spi-nor: wait for SR_WIP to clear on initial unlock mtd: nand: simplify nand_bch_init() usage mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: create an mtd_oobavail() helper and make use of it mtd: kill the ecclayout->oobavail field mtd: nand: check status before reporting timeout mtd: bcm63xxpart: give width specifier an 'int', not 'size_t' mtd: mtdram: Add parameter for setting writebuf size mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd' ...
2016-03-22Merge tag 'iommu-updates-v4.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - updates for the Exynos IOMMU driver to make use of default domains and to add support for the SYSMMU v5 - new Mediatek IOMMU driver - support for the ARMv7 short descriptor format in the io-pgtable code - default domain support for the ARM SMMU - couple of other small fixes all over the place * tag 'iommu-updates-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/ipmmu-vmsa: Add r8a7795 DT binding iommu/mediatek: Check for NULL instead of IS_ERR() iommu/io-pgtable-armv7s: Fix kmem_cache_alloc() flags iommu/mediatek: Fix handling of of_count_phandle_with_args result iommu/dma: Fix NEED_SG_DMA_LENGTH dependency iommu/mediatek: Mark PM functions as __maybe_unused iommu/mediatek: Select ARM_DMA_USE_IOMMU iommu/exynos: Use proper readl/writel register interface iommu/exynos: Pointers are nto physical addresses dts: mt8173: Add iommu/smi nodes for mt8173 iommu/mediatek: Add mt8173 IOMMU driver memory: mediatek: Add SMI driver dt-bindings: mediatek: Add smi dts binding dt-bindings: iommu: Add binding for mediatek IOMMU iommu/ipmmu-vmsa: Use ARCH_RENESAS iommu/exynos: Support multiple attach_device calls iommu/exynos: Add Maintainers entry for Exynos SYSMMU driver iommu/exynos: Add support for v5 SYSMMU iommu/exynos: Update device tree documentation iommu/exynos: Add support for SYSMMU controller with bogus version reg ...
2016-02-25memory: mediatek: Add SMI driverYong Wu
This patch add SMI(Smart Multimedia Interface) driver. This driver is responsible to enable/disable iommu and control the power domain and clocks of each local arbiter. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-02-08memory: omap-gpmc: Add support for AAD timingsNeil Armstrong
In order to support extended timings parameters on hardware supporting the "AAD" mode like the AM335x or DM816x, add these entries into the GPMC driver if the hardware is capable. Tested on DM816x and AM335x. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
2016-02-01driver/memory: Removal of deprecated NO_IRQRaghav Dogra
Replacing the NO_IRQ macro with 0. If there is no interrupt, returned value will be 0 regardless of what NO_IRQ is defined. Signed-off-by: Raghav Dogra <raghav@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-01-20Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...
2015-12-16fsl-ifc: add missing include on ARM64Lijun Pan
Need to include sched.h to fix the following compilation error if FSL_IFC is enabled on ARM64 machine. In file included from include/linux/mmzone.h:9:0, from include/linux/gfp.h:5, from include/linux/kmod.h:22, from include/linux/module.h:13, from drivers/memory/fsl_ifc.c:22: drivers/memory/fsl_ifc.c: In function ‘check_nand_stat’: include/linux/wait.h:165:35: error: ‘TASK_NORMAL’ undeclared (first use in this function) #define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL) ^ drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’ wake_up(&ctrl->nand_wait); ^ include/linux/wait.h:165:35: note: each undeclared identifier is reported only once for each function it appears in #define wake_up(x) __wake_up(x, TASK_NORMAL, 1, NULL) ^ drivers/memory/fsl_ifc.c:136:3: note: in expansion of macro ‘wake_up’ wake_up(&ctrl->nand_wait); ^ Analysis is as follows: I put some instrumental code and get the following .h files inclusion sequence: In file included from ./arch/arm64/include/asm/compat.h:25:0, from ./arch/arm64/include/asm/stat.h:23, from include/linux/stat.h:5, from include/linux/module.h:10, from drivers/memory/fsl_ifc.c:23: include/linux/sched.h:113:1: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘struct’ struct sched_attr { ^ CONFIG_COMPAT=y is enabled while 39 and 48 bit VA is selected. When 42 bit VA is selected, it does not enable CONFIG_COMPAT=y In ./arch/arm64/include/asm/stat.h:23, it has "#ifdef CONFIG_COMPAT" "#include <asm/compat.h>" "..." "#endif" Since ./arch/arm64/include/asm/stat.h does not include ./arch/arm64/include/asm/compat.h, then it will not include include/linux/sched.h Hence we have to manually add "#include <linux/sched.h>" in drivers/memory/fsl_ifc.c Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>