summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2016-08-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "KVM: - lock kvm_device list to prevent corruption on device creation. PPC: - split debugfs initialization from creation of the xics device to unlock the newly taken kvm lock earlier. s390: - prevent userspace from triggering two WARN_ON_ONCE. MIPS: - fix several issues in the management of TLB faults (Cc: stable)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: MIPS: KVM: Propagate kseg0/mapped tlb fault errors MIPS: KVM: Fix gfn range check in kseg0 tlb faults MIPS: KVM: Add missing gfn range check MIPS: KVM: Fix mapped fault broken commpage handling KVM: Protect device ops->create and list_add with kvm->lock KVM: PPC: Move xics_debugfs_init out of create KVM: s390: reset KVM_REQ_MMU_RELOAD if mapping the prefix failed KVM: s390: set the prefix initially properly
2016-08-12Merge tag 'powerpc-4.8-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some powerpc fixes for 4.8: Misc: - powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin - powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur - powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy - cxl: Set psl_fir_cntl to production environment value from Frederic Barrat - powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli - cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud - powerpc/vdso: Add missing include file from Guenter Roeck - powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva - powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy - powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter - crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard - powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens Benjamin Herrenschmidt: - powerpc/32: Fix crash during static key init - powerpc: Update obsolete comment in setup_32.c about early_init() - powerpc: Print the kernel load address at the end of prom_init() - powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs - powerpc/xics: Properly set Edge/Level type and enable resend Mahesh Salgaonkar: - powerpc/book3s: Fix MCE console messages for unrecoverable MCE. - powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers. - powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h - powerpc/powernv: Load correct TOC pointer while waking up from winkle. Andrew Donnellan: - cxl: Fix sparse warnings - cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests Michael Ellerman: - selftests/powerpc: Specify we expect to build with std=gnu99 - powerpc/Makefile: Use cflags-y/aflags-y for setting endian options - powerpc/pci: Fix endian bug in fixed PHB numbering" * tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits) selftests/powerpc: Specify we expect to build with std=gnu99 powerpc/vdso: Fix build rules to rebuild vdsos correctly powerpc/Makefile: Use cflags-y/aflags-y for setting endian options powerpc/32: Fix crash during static key init powerpc: Update obsolete comment in setup_32.c about early_init() powerpc: Print the kernel load address at the end of prom_init() powerpc/ptrace: Fix coredump since ptrace TM changes powerpc/32: Fix csum_partial_copy_generic() cxl: Set psl_fir_cntl to production environment value powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs powerpc/book3s: Fix MCE console messages for unrecoverable MCE. powerpc/pci: Fix endian bug in fixed PHB numbering powerpc/eeh: Switch to conventional PCI address output in EEH log cxl: Fix sparse warnings cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests cxl: Use fixed width predefined types in data structure. powerpc/vdso: Add missing include file powerpc: Fix unused function warning 'lmb_to_memblock' powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers. powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h ...
2016-08-12KVM: Protect device ops->create and list_add with kvm->lockChristoffer Dall
KVM devices were manipulating list data structures without any form of synchronization, and some implementations of the create operations also suffered from a lack of synchronization. Now when we've split the xics create operation into create and init, we can hold the kvm->lock mutex while calling the create operation and when manipulating the devices list. The error path in the generic code gets slightly ugly because we have to take the mutex again and delete the device from the list, but holding the mutex during anon_inode_getfd or releasing/locking the mutex in the common non-error path seemed wrong. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-08-12KVM: PPC: Move xics_debugfs_init out of createChristoffer Dall
As we are about to hold the kvm->lock during the create operation on KVM devices, we should move the call to xics_debugfs_init into its own function, since holding a mutex over extended amounts of time might not be a good idea. Introduce an init operation on the kvm_device_ops struct which cannot fail and call this, if configured, after the device has been created. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-08-10powerpc/vdso: Fix build rules to rebuild vdsos correctlyNicholas Piggin
When using if_changed, we need to add FORCE as a dependency (see Documentation/kbuild/makefiles.txt) otherwise we don't get command line change checking amongst other things. This has resulted in vdsos not being rebuilt when switching between big and little endian. The vdso64/32ld commands have to be changed around to avoid pulling FORCE into the linker command line (code copied from x86). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-10powerpc/Makefile: Use cflags-y/aflags-y for setting endian optionsMichael Ellerman
When we introduced the little endian support, we added the endian flags to CC directly using override. I don't know the history of why we did that, I suspect no one does. Although this mostly works, it has one bug, which is that CROSS32CC doesn't get -mbig-endian. That means when the compiler is little endian by default and the user is building big endian, vdso32 is incorrectly compiled as little endian and the kernel fails to build. Instead we can add the endian flags to cflags-y/aflags-y, and then append those to KBUILD_CFLAGS/KBUILD_AFLAGS. This has the advantage of being 1) less ugly, 2) the documented way of adding flags in the arch Makefile and 3) it fixes building vdso32 with a LE toolchain. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-10powerpc/32: Fix crash during static key initBenjamin Herrenschmidt
We cannot do those initializations from apply_feature_fixups() as this function runs in a very restricted environment on 32-bit where the kernel isn't running at its linked address and the PTRRELOC() macro must be used for any global accesss. Instead, split them into a separtate steup_feature_keys() function which is called in a more suitable spot on ppc32. Fixes: 309b315b6ec6 ("powerpc: Call jump_label_init() in apply_feature_fixups()") Reported-and-tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-10powerpc: Update obsolete comment in setup_32.c about early_init()Benjamin Herrenschmidt
We don't identify the machine type anymore... Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-10powerpc: Print the kernel load address at the end of prom_init()Benjamin Herrenschmidt
This makes it easier to debug crashes that happen very early before the kernel takes over Open Firmware by allowing us to relate the OF reported crashing addresses to offsets within the kernel. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-10powerpc/ptrace: Fix coredump since ptrace TM changesCyril Bur
Commit 8d460f6156cd ("powerpc/process: Add the function flush_tmregs_to_thread") added flush_tmregs_to_thread() and included the assumption that it would only be called for a task which is not current. Although this is correct for ptrace, when generating a core dump, some of the routines which call flush_tmregs_to_thread() are called. This leads to a WARNing such as: Not expecting ptrace on self: TM regs may be incorrect ------------[ cut here ]------------ WARNING: CPU: 123 PID: 7727 at arch/powerpc/kernel/process.c:1088 flush_tmregs_to_thread+0x78/0x80 CPU: 123 PID: 7727 Comm: libvirtd Not tainted 4.8.0-rc1-gcc6x-g61e8a0d #1 task: c000000fe631b600 task.stack: c000000fe63b0000 NIP: c00000000001a1a8 LR: c00000000001a1a4 CTR: c000000000717780 REGS: c000000fe63b3420 TRAP: 0700 Not tainted (4.8.0-rc1-gcc6x-g61e8a0d) MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28004222 XER: 20000000 ... NIP [c00000000001a1a8] flush_tmregs_to_thread+0x78/0x80 LR [c00000000001a1a4] flush_tmregs_to_thread+0x74/0x80 Call Trace: flush_tmregs_to_thread+0x74/0x80 (unreliable) vsr_get+0x64/0x1a0 elf_core_dump+0x604/0x1430 do_coredump+0x5fc/0x1200 get_signal+0x398/0x740 do_signal+0x54/0x2b0 do_notify_resume+0x98/0xb0 ret_from_except_lite+0x70/0x74 So fix flush_tmregs_to_thread() to detect the case where it is called on current, and a transaction is active, and in that case flush the TM regs to the thread_struct. This patch also moves flush_tmregs_to_thread() into ptrace.c as it is only called from that file. Fixes: 8d460f6156cd ("powerpc/process: Add the function flush_tmregs_to_thread") Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [mpe: Flesh out change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-10powerpc/32: Fix csum_partial_copy_generic()Christophe Leroy
Commit 7aef4136566b0 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") introduced a bug when destination address is odd and initial csum is not null In that (rare) case the initial csum value has to be rotated one byte as well as the resulting value is This patch also fixes related comments Fixes: 7aef4136566b0 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARsBenjamin Herrenschmidt
The generic allocation code may sometimes decide to assign a prefetchable 64-bit BAR to the M32 window. In fact it may also decide to allocate a 64-bit non-prefetchable BAR to the M64 one ! So using the resource flags as a test to decide which window was used for PE allocation is just wrong and leads to insane PE numbers. Instead, compare the addresses to figure it out. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rename the function as agreed by Ben & Gavin] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/book3s: Fix MCE console messages for unrecoverable MCE.Mahesh Salgaonkar
When machine check occurs with MSR(RI=0), it means MC interrupt is unrecoverable and kernel goes down to panic path. But the console message still shows it as recovered. This patch fixes the MCE console messages. Fixes: 36df96f8acaf ("powerpc/book3s: Decode and save machine check event.") Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/pci: Fix endian bug in fixed PHB numberingMichael Ellerman
The recent commit 63a72284b159 ("powerpc/pci: Assign fixed PHB number based on device-tree properties"), added code to read a 64-bit property from the device tree, and if not found read a 32-bit property (reg). There was a bug in the 32-bit case, on big endian machines, due to the use of the 64-bit value to read the 32-bit property. The cast of &prop means we end up writing to the high 32-bit of prop, leaving the low 32-bits containing whatever junk was on the stack. If that junk value was non-zero, and < MAX_PHBS, we would end up using it as the PHB id. This results in users seeing what appear to be random PHB ids. Fix it by reading into a u32 property and then assigning that to the u64 value, letting the CPU do the correct conversions for us. Fixes: 63a72284b159 ("powerpc/pci: Assign fixed PHB number based on device-tree properties") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/eeh: Switch to conventional PCI address output in EEH logGuilherme G. Piccoli
This is a very minor/trivial fix for the output of PCI address on EEH logs. The PCI address on "OF node" field currently is using ":" as a separator for the function, but the usual separator is ".". This patch changes the separator to dot, so the PCI address is printed as usual. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/vdso: Add missing include fileGuenter Roeck
Some powerpc builds fail with the following buld error. In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0, from arch/powerpc/kernel/vdso.c:28: arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr': arch/powerpc/include/asm/cputhreads.h:101:2: error: implicit declaration of function 'cpu_has_feature' Fixes: b92a226e5284 ("powerpc: Move cpu_has_feature() to a separate file") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc: Fix unused function warning 'lmb_to_memblock'Alastair D'Silva
This patch fixes the following warning: arch/powerpc/platforms/pseries/hotplug-memory.c:323:29: error: 'lmb_to_memblock' defined but not used [-Werror=unused-function] static struct memory_block *lmb_to_memblock(struct of_drconf_cell *lmb) ^~~~~~~~~~~~~~~ The only consumer of this function is 'dlpar_remove_lmb', which is enabled with CONFIG_MEMORY_HOTREMOVE, so move it into the same ifdef block. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.Mahesh Salgaonkar
The current implementation of MCE early handling modifies CR0/1 registers without saving its old values. Fix this by moving early check for powersaving mode to machine_check_handle_early(). The power architecture 2.06 or later allows the possibility of getting machine check while in nap/sleep/winkle. The last bit of HSPRG0 is set to 1, if thread is woken up from winkle. Hence, clear the last bit of HSPRG0 (r13) before MCE handler starts using it as paca pointer. Also, the current code always puts the thread into nap state irrespective of whatever idle state it woke up from. Fix that by looking at paca->thread_idle_state and put the thread back into same state where it came from. Fixes: 1c51089f777b ("powerpc/book3s: Return from interrupt if coming from evil context.") Reported-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Reviewed-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.hMahesh Salgaonkar
Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h so that MCE handler changes in subsequent patch can use it. No functionality change. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/powernv: Load correct TOC pointer while waking up from winkle.Mahesh Salgaonkar
The function pnv_restore_hyp_resource() loads the TOC into r2 from the invalid PACA pointer before fixing r13 value. This do not affect POWER ISA 3.0 but it does have an impact on POWER ISA 2.07 or less leading CPU to get stuck forever. login: [ 471.830433] Processor 120 is stuck. This can be easily reproducible using following steps: - Turn off SMT $ ppc64_cpu --smt=off - offline/online any online cpu (Thread 0 of any core which is online) $ echo 0 > /sys/devices/system/cpu/cpu<num>/online $ echo 1 > /sys/devices/system/cpu/cpu<num>/online For POWER ISA 2.07 or less, the last bit of HSPRG0 is set indicating that thread is waking up from winkle. Hence, the last bit of HSPRG0(r13) needs to be clear before accessing it as PACA to avoid loading invalid values from invalid PACA pointer. Fix this by loading TOC after r13 register is corrected. Fixes: bcef83a00dc4 ("powerpc/powernv: Add platform support for stop instruction") Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/powernv/ioda: Fix TCE invalidate to work in real mode againAlexey Kardashevskiy
Commit fd141d1a99a3 ("powerpc/powernv/pci: Rework accessing the TCE invalidate register") broke TCE invalidation on IODA2/PHB3 for real mode. This makes invalidate work again. Fixes: fd141d1a99a3 ("powerpc/powernv/pci: Rework accessing the TCE invalidate register") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/cell: Add missing error code in spufs_mkgang()Dan Carpenter
We should return -ENOMEM if alloc_spu_gang() fails. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/xics: Properly set Edge/Level type and enable resendBenjamin Herrenschmidt
This sets the type of the interrupt appropriately. We set it as follow: - If not mapped from the device-tree, we use edge. This is the case of the virtual interrupts and PCI MSIs for example. - If mapped from the device-tree and #interrupt-cells is 2 (PAPR compliant), we use the second cell to set the appropriate type - If mapped from the device-tree and #interrupt-cells is 1 (current OPAL on P8 does that), we assume level sensitive since those are typically going to be the PSI LSIs which are level sensitive. Additionally, we mark the interrupts requested via the opal_interrupts property all level. This is a bit fishy but the best we can do until we fix OPAL to properly expose them with a complete descriptor. It is also correct for the current HW anyway as OPAL interrupts are currently PCI error and PSI interrupts which are level. Finally now that edge interrupts are properly identified, we can enable CONFIG_HARDIRQS_SW_RESEND which will make the core re-send them if they occur while masked, which some drivers rely upon. This fixes issues with lost interrupts on some Mellanox adapters. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09crypto: crc32c-vpmsum - Convert to CPU feature based module autoloadingAnton Blanchard
This patch utilises the GENERIC_CPU_AUTOPROBE infrastructure to automatically load the crc32c-vpmsum module if the CPU supports it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-08Merge tag 'usercopy-v4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull usercopy protection from Kees Cook: "Tbhis implements HARDENED_USERCOPY verification of copy_to_user and copy_from_user bounds checking for most architectures on SLAB and SLUB" * tag 'usercopy-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: SLUB hardened usercopy support mm: SLAB hardened usercopy support s390/uaccess: Enable hardened usercopy sparc/uaccess: Enable hardened usercopy powerpc/uaccess: Enable hardened usercopy ia64/uaccess: Enable hardened usercopy arm64/uaccess: Enable hardened usercopy ARM: uaccess: Enable hardened usercopy x86/uaccess: Enable hardened usercopy mm: Hardened usercopy mm: Implement stack frame object validation mm: Add is_migrate_cma_page
2016-08-08powerpc/pasemi: Fix coherent_dma_mask for dma engineDarren Stevens
Commit 817820b0226a ("powerpc/iommu: Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask) adds a check of coherent_dma_mask for dma allocations. Unfortunately current PASemi code does not set this value for the DMA engine, which ends up with the default value of 0xffffffff, the result is on a PASemi system with >2Gb ram and iommu enabled the the onboard ethernet stops working due to an inability to allocate memory. Add an initialisation to pci_dma_dev_setup_pasemi(). Signed-off-by: Darren Stevens <darren@stevens-zone.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-05Merge tag 'rtc-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.8 Cleanups: - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc - move mn10300 to rtc-cmos Subsystem: - fix wakealarms after hibernate - multiples fixes for rctest - simplify implementations of .read_alarm New drivers: - Maxim MAX6916 Drivers: - ds1307: fix weekday - m41t80: add wakeup support - pcf85063: add support for PCF85063A variant - rv8803: extend i2c fix and other fixes - s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP TS-41x - s3c: clock fixes" * tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits) rtc: rv8803: Clear V1F when setting the time rtc: rv8803: Stop the clock while setting the time rtc: rv8803: Always apply the I²C workaround rtc: rv8803: Fix read day of week rtc: rv8803: Remove the check for valid time rtc: rv8803: Kconfig: Indicate rx8900 support rtc: asm9260: remove .owner field for driver rtc: at91sam9: Fix missing spin_lock_init() rtc: m41t80: add suspend handlers for alarm IRQ rtc: m41t80: make it a real error message rtc: pcf85063: Add support for the PCF85063A device rtc: pcf85063: fix year range rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy rtc: explicitly set tm_sec = 0 for drivers with minute accurancy rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() rtc: s3c: Remove unnecessary call to disable already disabled clock rtc: abx80x: use devm_add_action_or_reset() rtc: m41t80: use devm_add_action_or_reset() rtc: fix a typo and reduce three empty lines to one rtc: s35390a: improve two comments in .set_alarm ...
2016-08-05Merge tag 'powerpc-4.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "These were delayed for various reasons, so I let them sit in next a bit longer, rather than including them in my first pull request. Fixes: - Fix early access to cpu_spec relocation from Benjamin Herrenschmidt - Fix incorrect event codes in power9-event-list from Madhavan Srinivasan - Move register_process_table() out of ppc_md from Michael Ellerman Use jump_label use for [cpu|mmu]_has_feature(): - Add mmu_early_init_devtree() from Michael Ellerman - Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman - Do hash device tree scanning earlier from Michael Ellerman - Do radix device tree scanning earlier from Michael Ellerman - Do feature patching before MMU init from Michael Ellerman - Check features don't change after patching from Michael Ellerman - Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V - Convert mmu_has_feature() to returning bool from Michael Ellerman - Convert cpu_has_feature() to returning bool from Michael Ellerman - Define radix_enabled() in one place & use static inline from Michael Ellerman - Add early_[cpu|mmu]_has_feature() from Michael Ellerman - Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V - jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao - Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V - Remove mfvtb() from Kevin Hao - Move cpu_has_feature() to a separate file from Kevin Hao - Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman - Add option to use jump label for cpu_has_feature() from Kevin Hao - Add option to use jump label for mmu_has_feature() from Kevin Hao - Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V - Annotate jump label assembly from Michael Ellerman TLB flush enhancements from Aneesh Kumar K.V: - radix: Implement tlb mmu gather flush efficiently - Add helper for finding SLBE LLP encoding - Use hugetlb flush functions - Drop multiple definition of mm_is_core_local - radix: Add tlb flush of THP ptes - radix: Rename function and drop unused arg - radix/hugetlb: Add helper for finding page size - hugetlb: Add flush_hugetlb_tlb_range - remove flush_tlb_page_nohash Add new ptrace regsets from Anshuman Khandual and Simon Guo: - elf: Add powerpc specific core note sections - Add the function flush_tmregs_to_thread - Enable in transaction NT_PRFPREG ptrace requests - Enable in transaction NT_PPC_VMX ptrace requests - Enable in transaction NT_PPC_VSX ptrace requests - Adapt gpr32_get, gpr32_set functions for transaction - Enable support for NT_PPC_CGPR - Enable support for NT_PPC_CFPR - Enable support for NT_PPC_CVMX - Enable support for NT_PPC_CVSX - Enable support for TM SPR state - Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR - Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR - Enable support for EBB registers - Enable support for Performance Monitor registers" * tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc/mm: Move register_process_table() out of ppc_md powerpc/perf: Fix incorrect event codes in power9-event-list powerpc/32: Fix early access to cpu_spec relocation powerpc/ptrace: Enable support for Performance Monitor registers powerpc/ptrace: Enable support for EBB registers powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR powerpc/ptrace: Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR powerpc/ptrace: Enable support for TM SPR state powerpc/ptrace: Enable support for NT_PPC_CVSX powerpc/ptrace: Enable support for NT_PPC_CVMX powerpc/ptrace: Enable support for NT_PPC_CFPR powerpc/ptrace: Enable support for NT_PPC_CGPR powerpc/ptrace: Adapt gpr32_get, gpr32_set functions for transaction powerpc/ptrace: Enable in transaction NT_PPC_VSX ptrace requests powerpc/ptrace: Enable in transaction NT_PPC_VMX ptrace requests powerpc/ptrace: Enable in transaction NT_PRFPREG ptrace requests powerpc/process: Add the function flush_tmregs_to_thread elf: Add powerpc specific core note sections powerpc/mm: remove flush_tlb_page_nohash powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range ...
2016-08-04powerpc/fsl_rio: fix a missing error codeDan Carpenter
We should set the error code here rather than incorrectly returning 0. Otherwise static checkers complain. Link: http://lkml.kernel.org/r/20160804053525.GM775@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04powerpc: add explicit #include <asm/asm-compat.h> for jump labelJason Baron
The stringify_in_c() macro may not be included. Make the dependency explicit. Link: http://lkml.kernel.org/r/564720c5328edd53c9d56db325be7215440eec3e.1467837322.git.jbaron@akamai.com Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Joe Perches <joe@perches.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04powerpc/mm: Move register_process_table() out of ppc_mdMichael Ellerman
We want to initialise register_process_table() before ppc_md is setup, so that it can be called as part of MMU init (at least on Radix ATM). That no longer works because probe_machine() requires that ppc_md be empty before it's called, and we now do probe_machine() much later. So make register_process_table a global for now. It will probably move into a mmu_radix_ops struct at some point in the future. This was broken by me when applying commit 7025776ed1eb "powerpc/mm: Move hash table ops to a separate structure" due to conflicts with other patches. Fixes: 7025776ed1eb ("powerpc/mm: Move hash table ops to a separate structure") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-04powerpc/perf: Fix incorrect event codes in power9-event-listMadhavan Srinivasan
These have been changed in the hardware, update Linux's version. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-03powerpc/32: Fix early access to cpu_spec relocationBenjamin Herrenschmidt
Commit 9402c6846131 ("powerpc: Factor do_feature_fixup calls") introduced a subtle bug on 32-bit. When reading the cpu spec from the global, we not only need to do a pointer relocation on the global address but also on the pointer we read from it. This fixes crashes reported on MPC5200 based machines. Fixes: 9402c6846131 ("powerpc: Factor do_feature_fixup calls") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-02Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - the rest of ocfs2 - various hotfixes, mainly MM - quite a bit of misc stuff - drivers, fork, exec, signals, etc. - printk updates - firmware - checkpatch - nilfs2 - more kexec stuff than usual - rapidio updates - w1 things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) ipc: delete "nr_ipc_ns" kcov: allow more fine-grained coverage instrumentation init/Kconfig: add clarification for out-of-tree modules config: add android config fragments init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig relay: add global mode support for buffer-only channels init: allow blacklisting of module_init functions w1:omap_hdq: fix regression w1: add helper macro module_w1_family w1: remove need for ida and use PLATFORM_DEVID_AUTO rapidio/switches: add driver for IDT gen3 switches powerpc/fsl_rio: apply changes for RIO spec rev 3 rapidio: modify for rev.3 specification changes rapidio: change inbound window size type to u64 rapidio/idt_gen2: fix locking warning rapidio: fix error handling in mbox request/release functions rapidio/tsi721_dma: advance queue processing from transfer submit call rapidio/tsi721: add messaging mbox selector parameter rapidio/tsi721: add PCIe MRRS override parameter rapidio/tsi721_dma: add channel mask and queue size parameters ...
2016-08-02powerpc/fsl_rio: apply changes for RIO spec rev 3Alexandre Bounine
- Remove check for parallel PHY - Set LP-Serial Register Map type [akpm@linux-foundation.org: fix build] [alexandre.bounine@idt.com: fix build fix] Link: http://lkml.kernel.org/r/20160802184932.2755-1-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-13-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02rapidio: change inbound window size type to u64Alexandre Bounine
Current definition of map_inb() mport operations callback uses u32 type to specify required inbound window (IBW) size. This is limiting factor because existing hardware - tsi721 and fsl_rio, both support IBW size up to 16GB. Changing type of size parameter to u64 to allow IBW size configurations larger than 4GB. [alexandre.bounine@idt.com: remove compiler warning about size of constant] Link: http://lkml.kernel.org/r/20160802184856.2566-1-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-11-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02signal: consolidate {TS,TLF}_RESTORE_SIGMASK codeAndy Lutomirski
In general, there's no need for the "restore sigmask" flag to live in ti->flags. alpha, ia64, microblaze, powerpc, sh, sparc (64-bit only), tile, and x86 use essentially identical alternative implementations, placing the flag in ti->status. Replace those optimized implementations with an equally good common implementation that stores it in a bitfield in struct task_struct and drop the custom implementations. Additional architectures can opt in by removing their TIF_RESTORE_SIGMASK defines. Link: http://lkml.kernel.org/r/8a14321d64a28e40adfddc90e18a96c086a6d6f9.1468522723.git.luto@kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Tested-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02include: mman: use bool instead of int for the return value of ↵Chen Gang
arch_validate_prot For pure bool function's return value, bool is a little better more or less than int. Link: http://lkml.kernel.org/r/1469331815-2026-1-git-send-email-chengang@emindsoft.com.cn Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02treewide: replace obsolete _refok by __refFabian Frederick
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-08-02Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - GCC plugin support by Emese Revfy from grsecurity, with a fixup from Kees Cook. The plugins are meant to be used for static analysis of the kernel code. Two plugins are provided already. - reduction of the gcc commandline by Arnd Bergmann. - IS_ENABLED / IS_REACHABLE macro enhancements by Masahiro Yamada - bin2c fix by Michael Tautschnig - setlocalversion fix by Wolfram Sang * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: gcc-plugins: disable under COMPILE_TEST kbuild: Abort build on bad stack protector flag scripts: Fix size mismatch of kexec_purgatory_size kbuild: make samples depend on headers_install Kbuild: don't add obj tree in additional includes Kbuild: arch: look for generated headers in obtree Kbuild: always prefix objtree in LINUXINCLUDE Kbuild: avoid duplicate include path Kbuild: don't add ../../ to include path vmlinux.lds.h: replace config_enabled() with IS_ENABLED() kconfig.h: allow to use IS_{ENABLE,REACHABLE} in macro expansion kconfig.h: use already defined macros for IS_REACHABLE() define export.h: use __is_defined() to check if __KSYM_* is defined kconfig.h: use __is_defined() to check if MODULE is defined kbuild: setlocalversion: print error to STDERR Add sancov plugin Add Cyclomatic complexity GCC plugin GCC plugin infrastructure Shared library support
2016-08-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: - ARM: GICv3 ITS emulation and various fixes. Removal of the old VGIC implementation. - s390: support for trapping software breakpoints, nested virtualization (vSIE), the STHYI opcode, initial extensions for CPU model support. - MIPS: support for MIPS64 hosts (32-bit guests only) and lots of cleanups, preliminary to this and the upcoming support for hardware virtualization extensions. - x86: support for execute-only mappings in nested EPT; reduced vmexit latency for TSC deadline timer (by about 30%) on Intel hosts; support for more than 255 vCPUs. - PPC: bugfixes. * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits) KVM: PPC: Introduce KVM_CAP_PPC_HTM MIPS: Select HAVE_KVM for MIPS64_R{2,6} MIPS: KVM: Reset CP0_PageMask during host TLB flush MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX() MIPS: KVM: Sign extend MFC0/RDHWR results MIPS: KVM: Fix 64-bit big endian dynamic translation MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase MIPS: KVM: Use 64-bit CP0_EBase when appropriate MIPS: KVM: Set CP0_Status.KX on MIPS64 MIPS: KVM: Make entry code MIPS64 friendly MIPS: KVM: Use kmap instead of CKSEG0ADDR() MIPS: KVM: Use virt_to_phys() to get commpage PFN MIPS: Fix definition of KSEGX() for 64-bit KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD kvm: x86: nVMX: maintain internal copy of current VMCS KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures KVM: arm64: vgic-its: Simplify MAPI error handling KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers KVM: arm64: vgic-its: Turn device_id validation into generic ID validation ...
2016-08-01KVM: PPC: Introduce KVM_CAP_PPC_HTMSam Bobroff
Introduce a new KVM capability, KVM_CAP_PPC_HTM, that can be queried to determine if a PowerPC KVM guest should use HTM (Hardware Transactional Memory). This will be used by QEMU to populate the pa-features bits in the guest's device tree. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-01Merge branch 'pci/msi-affinity' into nextBjorn Helgaas
Conflicts: drivers/nvme/host/pci.c
2016-08-01powerpc/ptrace: Enable support for Performance Monitor registersAnshuman Khandual
This patch enables support for Performance monitor registers related ELF core note NT_PPC_PMU based ptrace requests through PTRACE_GETREGSET, PTRACE_SETREGSET calls. This is achieved through adding one new register sets REGSET_PMU in powerpc corresponding to the ELF core note sections added in this regard. It also implements the get, set and active functions for this new register sets added. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-01powerpc/ptrace: Enable support for EBB registersAnshuman Khandual
This patch enables support for EBB state registers related ELF core note NT_PPC_EBB based ptrace requests through PTRACE_GETREGSET, PTRACE_SETREGSET calls. This is achieved through adding one new register sets REGSET_EBB in powerpc corresponding to the ELF core note sections added in this regard. It also implements the get, set and active functions for this new register sets added. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-01powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCRAnshuman Khandual
This patch enables support for running TAR, PPR, DSCR registers related ELF core notes NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR based ptrace requests through PTRACE_GETREGSET, PTRACE_SETREGSET calls. This is achieved through adding three new register sets REGSET_TAR, REGSET_PPR, REGSET_DSCR in powerpc corresponding to the ELF core note sections added in this regad. It implements the get, set and active functions for all these new register sets added. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-01powerpc/ptrace: Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCRAnshuman Khandual
This patch enables support for all three TM checkpointed SPR states related ELF core note NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR based ptrace requests through PTRACE_GETREGSET, PTRACE_SETREGSET calls. This is achieved through adding three new register sets REGSET_TM_CTAR, REGSET_TM_CPPR and REGSET_TM_CDSCR in powerpc corresponding to the ELF core note sections added. It implements the get, set and active functions for all these new register sets added. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-01powerpc/ptrace: Enable support for TM SPR stateAnshuman Khandual
This patch enables support for TM SPR state related ELF core note NT_PPC_TM_SPR based ptrace requests through PTRACE_GETREGSET, PTRACE_SETREGSET calls. This is achieved through adding a register set REGSET_TM_SPR in powerpc corresponding to the ELF core note section added. It implements the get, set and active functions for this new register set added. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>