summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-rx51-video.c
AgeCommit message (Collapse)Author
2016-06-03ARM: OMAP2: Use the platform_data header for omapdssPeter Ujfalusi
Instead of the full omapdss internal header, include only the platform_data header. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-06-03ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.hPeter Ujfalusi
The omap_display_init() is implemented in the mach-omap2/display.c so the declaration should have been there as well. Change the board files to include display.h to avoid build breakage at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-06-03ARM: OMAP: rx51-video: Do not set TV connector_typePeter Ujfalusi
OMAP_DSS_VENC_TYPE_COMPOSITE is 0. There is no need to explicitly set the connector_type. This change is needed for the omapdss header cleanup. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2014-04-18ARM: OMAP2+: N900: remove omapdss init for DT bootSebastian Reichel
Do not try to initialize display for DT boot, since omapdss is now initialized via Device Tree. Without this patch the display subsystem does not properly come up. Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: rx51: use new display driversTomi Valkeinen
Use the new display drivers for RX51 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com>
2013-07-04ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabledPavel Machek
We still need video & sound drivers with device tree enabled. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-04arm: omap: board-rx-51: use acx565akm panel's gpio handlingArchit Taneja
The rx-51 board file currently requests gpios required by the acx565akm panel, and provides platform_enable/disable callbacks to configure them. These tasks have been moved to the acx565akm panel driver itself and shouldn't be done in the board files. Remove the gpio requests and the platform callbacks from the board file. Pass the panel_acx565akm_data instance 'lcd_data' to omap_dss_device instead of passing the gpio number in omap_dss_device's reset_gpio. Add the gpio information to panel_acx565akm_data so that it's passed to the panel driver. Signed-off-by: Archit Taneja <archit@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2013-01-11ARM: OMAP2+: Use omap initcallsTony Lindgren
This way the initcalls don't run on other SoCs on multiplatform kernels. Otherwise we'll get something like this when booting on vexpress: omap_hwmod: _ensure_mpu_hwmod_is_setup: MPU initiator hwmod mpu not yet registered ... WARNING: at arch/arm/mach-omap2/pm.c:82 _init_omap_device+0x74/0x94() _init_omap_device: could not find omap_hwmod for mpu ... omap-dma-engine omap-dma-engine: OMAP DMA engine driver ... Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-13OMAP: RX51: remove use of vramTomi Valkeinen
As omapfb no longer uses omap specific vram allocator we can remove the vram pre-allocation from rx51 board file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-09-20ARM: OMAP2+: Make board-rx51.h localTony Lindgren
This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-19ARM: omap: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
2011-05-26Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
2011-05-12arm: omap2plus: GPIO cleanupIgor Grinberg
use gpio_request_<one|array>() instead of multiple gpiolib calls, remove unneeded variables, etc. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-11OMAP: DSS2: Move display.h to include/video/Tomi Valkeinen
arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS driver. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-23OMAP2, 3: DSS2: board files: replace platform_device_register with ↵Senthilvadivu Guruswamy
omap_display_init() This patch updated board files to replace platform_device_register or platform_add_devices of DSS with omap_display_init(). This moves away registration of DSS from board files into a common place. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2010-12-22omap: rx51: Remove tvout code that plays with gpio 40Jarkko Nikula
Commit 60d24ee "Added video data to support tvout on rx51" added code that tries to assign gpio 40 as OMAP DSS reset_gpio for tvout. This is wrong since this gpio has nothing to do with OMAP DSS but it is used to control one switch that selects is the audio jack connected to tvout or audio circuitry. This switch is already supported by the RX51 ASoC driver so there is no need to control it elsewhere. Switch is contolled with ALSA control 'Jack Function' and tvout can be selected with following example: amixer -D hw:0 set 'Jack Function' 'TV-OUT' Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20Added video data to support tvout on rx51Srikar
To support tvout on rx51,added Intilization data, tvout as display device and enabled venc through gpio on rx51 Signed-off-by: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08OMAP2plus: Fix static function warningsManjunath Kondaiah G
This patch fixes sparse warnings due non declarations of static functions. arch/arm/mach-omap2/timer-gp.c:115:12: warning: symbol 'omap2_gp_clockevent_set_gptimer' was not declared. Should it be static? arch/arm/mach-omap2/powerdomain.c:993:5: warning: symbol 'pwrdm_set_lowpwrstchange' was not declared. Should it be static? arch/arm/mach-omap2/board-flash.c:141:8: warning: symbol 'board_nand_init' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:416:6: warning: symbol 'n8x0_mmc_slot1_cover_handler' was not declared. Should it be static? arch/arm/mach-omap2/board-n8x0.c:544:13: warning: symbol 'n8x0_mmc_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-peripherals.c:902:13: warning: symbol 'rx51_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-video.c:107:13: warning: symbol 'rx51_video_mem_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-debugboard.c:155:12: warning: symbol 'zoom_debugboard_init' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-peripherals.c:280:13: warning: symbol 'zoom_peripherals_init' was not declared. Should it be static? arch/arm/mach-omap2/board-igep0020.c:110:13: warning: symbol 'igep2_flash_init' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:109:6: warning: symbol 'am3517_evm_ethernet_init' was not declared. Should it be static? drivers/mtd/onenand/omap2.c:577:5: warning: symbol 'omap2_onenand_rephase' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05omap: mux: Remove old mux codeTony Lindgren
All mach-omap2 omaps should now use the new mux code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-18OMAP: RX51: Add LCD Panel supportRoger Quadros
Adds basic support for LCD Panel on Nokia N900 Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-03 07:38:25 +0000