summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap3-cm-t3x.dtsi
AgeCommit message (Collapse)Author
2016-06-29ARM: dts: cm-t3x: remove unneeded unit name in connectorJavier Martinez Canillas
This patch fixes the following DTC warnings for omap3-cm-t3517.dtb, omap3-cm-t3530.dtb and omap3-cm-t3730.dtb: "connector@1 has a unit name, but no reg property" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-26ARM: dts: omap3: Fix NAND device nodesRoger Quadros
Add compatible id, GPMC register resource and interrupt resource to NAND controller nodes. The GPMC node will provide an interrupt controller for the NAND IRQs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: dts: omap: replace legacy *,wakeup property with wakeup-sourceSudeep Holla
Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "linux,wakeup" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-10-12ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boardsJavier Martinez Canillas
Many OMAP2+ DTS are not using the defined constants to express the GPIO polarity. Replace these so the DTS are easier to read. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-13ARM: dts: cm-t3x: add NAND supportDmitry Lifshitz
CM-T3517, CM-T3530 and CM-T3730 features NAND storage chip connected to GPMC bus. Add GPMC DT entry into the root DT file omap3-cm-t3x.dtsi, common for all three modules. NAND timings are calculated to be safe for CM-T3x devices as it works now in non DT boot (in this case the timings are updated by U-Boot). Update GPMC ranges in boards DT files to include all connected devices. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-24ARM: dts: sbc-t3x30: add audio supportDmitry Lifshitz
Add audio related DT nodes Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-24ARM: dts: cm-t3x: add TV out supportDmitry Lifshitz
Add TV out support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-24ARM: dts: cm-t3x: add I2C1 pinmuxDmitry Lifshitz
Add missing I2C1 pinmux setup. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-21ARM: dts: cm-t3x: add EEPROM supportDmitry Lifshitz
Add at24 EEPROM chip support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> [tony@atomide.com: updated to remove missing i2c1_pins] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-21ARM: dts: cm-t3x: add ADS7846 touchscreen supportDmitry Lifshitz
Add ADS7846 touchscreen support. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-21ARM: dts: cm-t3x: cleanup comments indentationDmitry Lifshitz
Fix comment style Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: sbc-t3x: add DVI display dataDmitry Lifshitz
Add DSS related pinmux and display data nodes required to support DVI video out on SBC-T3530, SBC-T3730 and SBC-T3517. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: cm-t3x30: add HS USB Host supportDmitry Lifshitz
Add HS USB Host support along with USB PHYs and power supply regulators Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: cm-t3x: add gpio-led pinmuxDmitry Lifshitz
GPIO186 is used for the heartbeat led. Setup the pinmux for the GPIO186. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: sbc-t3x: disable mmc3Dmitry Lifshitz
Disable mmc3 interface, since is not used on sbc-t3x boards. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-28ARM: dts: sbc-t3x: refactor DT supportDmitry Lifshitz
Refactor the sbc-t3x device tree as a preparation for additional (sbc-t3530, sbc-t3517, etc.) boards support. No functional changes. The device tree will have the following structure: omap3-cm-t3x.dtsi | |<-- omap3-cm-t3x30.dtsi | | | | | | ----- ------- ------------ | | | CoM | | Board | | Base board | | | ----- ------- ------------ | | omap3-sb-t35.dtsi | | | | |<-- omap3-cm-t3730.dts <-- omap3-sbc-t3730.dts -->| | | | | |<-- omap3-cm-t3530.dts <-- omap3-sbc-t3530.dts -->| | | |<-------- omap3-cm-t3517.dts <-- omap3-sbc-t3517.dts -->| Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-22 16:13:18 +0000