hikey: support BL2

BL2 is used to load BL31 and SCP_BL2. In HiKey platform, SCP_BL2
is the mcu firmware that is used to scale cpu frequency and switch
low power mode.

Change-Id: I1621aa65bea989fd125ee8502fd56ef72362bf97
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Dan Handley <dan.handley@arm.com>

7 files changed, 2623 insertions, 0 deletions

diff --git a/plat/hisilicon/hikey/hikey_bl2_setup.c b/plat/hisilicon/hikey/hikey_bl2_setup.c
new file mode 100644
index 00000000..9e9909b9
--- /dev/null
+++ b/plat/hisilicon/hikey/hikey_bl2_setup.c
@@ -0,0 +1,315 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <dw_mmc.h>
+#include <emmc.h>
+#include <errno.h>
+#include <hi6220.h>
+#include <hisi_mcu.h>
+#include <hisi_sram_map.h>
+#include <mmio.h>
+#include <platform_def.h>
+#include <sp804_delay_timer.h>
+#include <string.h>
+
+#include "hikey_def.h"
+#include "hikey_private.h"
+
+/*
+ * The next 2 constants identify the extents of the code & RO data region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned.  It is the responsibility of the linker script to ensure that
+ * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
+ */
+#define BL2_RO_BASE (unsigned long)(&__RO_START__)
+#define BL2_RO_LIMIT (unsigned long)(&__RO_END__)
+
+/*
+ * The next 2 constants identify the extents of the coherent memory region.
+ * These addresses are used by the MMU setup code and therefore they must be
+ * page-aligned.  It is the responsibility of the linker script to ensure that
+ * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
+ * page-aligned addresses.
+ */
+#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
+#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
+
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+typedef struct bl2_to_bl31_params_mem {
+	bl31_params_t		bl31_params;
+	image_info_t		bl31_image_info;
+	image_info_t		bl32_image_info;
+	image_info_t		bl33_image_info;
+	entry_point_info_t	bl33_ep_info;
+	entry_point_info_t	bl32_ep_info;
+	entry_point_info_t	bl31_ep_info;
+} bl2_to_bl31_params_mem_t;
+
+static bl2_to_bl31_params_mem_t bl31_params_mem;
+
+meminfo_t *bl2_plat_sec_mem_layout(void)
+{
+	return &bl2_tzram_layout;
+}
+
+void bl2_plat_get_scp_bl2_meminfo(meminfo_t *scp_bl2_meminfo)
+{
+	scp_bl2_meminfo->total_base = SCP_BL2_BASE;
+	scp_bl2_meminfo->total_size = SCP_BL2_SIZE;
+	scp_bl2_meminfo->free_base = SCP_BL2_BASE;
+	scp_bl2_meminfo->free_size = SCP_BL2_SIZE;
+}
+
+int bl2_plat_handle_scp_bl2(struct image_info *scp_bl2_image_info)
+{
+	/* Enable MCU SRAM */
+	hisi_mcu_enable_sram();
+
+	/* Load MCU binary into SRAM */
+	hisi_mcu_load_image(scp_bl2_image_info->image_base,
+			    scp_bl2_image_info->image_size);
+	/* Let MCU running */
+	hisi_mcu_start_run();
+
+	INFO("%s: MCU PC is at 0x%x\n",
+	     __func__, mmio_read_32(AO_SC_MCU_SUBSYS_STAT2));
+	INFO("%s: AO_SC_PERIPH_CLKSTAT4 is 0x%x\n",
+	     __func__, mmio_read_32(AO_SC_PERIPH_CLKSTAT4));
+	return 0;
+}
+
+bl31_params_t *bl2_plat_get_bl31_params(void)
+{
+	bl31_params_t *bl2_to_bl31_params = NULL;
+
+	/*
+	 * Initialise the memory for all the arguments that needs to
+	 * be passed to BL3-1
+	 */
+	memset(&bl31_params_mem, 0, sizeof(bl2_to_bl31_params_mem_t));
+
+	/* Assign memory for TF related information */
+	bl2_to_bl31_params = &bl31_params_mem.bl31_params;
+	SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
+
+	/* Fill BL3-1 related information */
+	bl2_to_bl31_params->bl31_image_info = &bl31_params_mem.bl31_image_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
+		VERSION_1, 0);
+
+	/* Fill BL3-2 related information if it exists */
+#if BL32_BASE
+	bl2_to_bl31_params->bl32_ep_info = &bl31_params_mem.bl32_ep_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, PARAM_EP,
+		VERSION_1, 0);
+	bl2_to_bl31_params->bl32_image_info = &bl31_params_mem.bl32_image_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, PARAM_IMAGE_BINARY,
+		VERSION_1, 0);
+#endif
+
+	/* Fill BL3-3 related information */
+	bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem.bl33_ep_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
+		PARAM_EP, VERSION_1, 0);
+
+	/* BL3-3 expects to receive the primary CPU MPID (through x0) */
+	bl2_to_bl31_params->bl33_ep_info->args.arg0 = 0xffff & read_mpidr();
+
+	bl2_to_bl31_params->bl33_image_info = &bl31_params_mem.bl33_image_info;
+	SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
+		VERSION_1, 0);
+
+	return bl2_to_bl31_params;
+}
+
+struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
+{
+	return &bl31_params_mem.bl31_ep_info;
+}
+
+void bl2_plat_set_bl31_ep_info(image_info_t *image,
+			       entry_point_info_t *bl31_ep_info)
+{
+	SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
+	bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+				       DISABLE_ALL_EXCEPTIONS);
+}
+
+void bl2_plat_set_bl33_ep_info(image_info_t *image,
+			       entry_point_info_t *bl33_ep_info)
+{
+	unsigned long el_status;
+	unsigned int mode;
+
+	/* Figure out what mode we enter the non-secure world in */
+	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+	el_status &= ID_AA64PFR0_ELX_MASK;
+
+	if (el_status)
+		mode = MODE_EL2;
+	else
+		mode = MODE_EL1;
+
+	/*
+	 * TODO: Consider the possibility of specifying the SPSR in
+	 * the FIP ToC and allowing the platform to have a say as
+	 * well.
+	 */
+	bl33_ep_info->spsr = SPSR_64(mode, MODE_SP_ELX,
+				       DISABLE_ALL_EXCEPTIONS);
+	SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
+}
+
+void bl2_plat_flush_bl31_params(void)
+{
+	flush_dcache_range((unsigned long)&bl31_params_mem,
+			   sizeof(bl2_to_bl31_params_mem_t));
+}
+
+void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
+{
+	bl33_meminfo->total_base = DDR_BASE;
+	bl33_meminfo->total_size = DDR_SIZE;
+	bl33_meminfo->free_base = DDR_BASE;
+	bl33_meminfo->free_size = DDR_SIZE;
+}
+
+static void reset_dwmmc_clk(void)
+{
+	unsigned int data;
+
+	/* disable mmc0 bus clock */
+	mmio_write_32(PERI_SC_PERIPH_CLKDIS0, PERI_CLK0_MMC0);
+	do {
+		data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
+	} while (data & PERI_CLK0_MMC0);
+	/* enable mmc0 bus clock */
+	mmio_write_32(PERI_SC_PERIPH_CLKEN0, PERI_CLK0_MMC0);
+	do {
+		data = mmio_read_32(PERI_SC_PERIPH_CLKSTAT0);
+	} while (!(data & PERI_CLK0_MMC0));
+	/* reset mmc0 clock domain */
+	mmio_write_32(PERI_SC_PERIPH_RSTEN0, PERI_RST0_MMC0);
+
+	/* bypass mmc0 clock phase */
+	data = mmio_read_32(PERI_SC_PERIPH_CTRL2);
+	data |= 3;
+	mmio_write_32(PERI_SC_PERIPH_CTRL2, data);
+
+	/* disable low power */
+	data = mmio_read_32(PERI_SC_PERIPH_CTRL13);
+	data |= 1 << 3;
+	mmio_write_32(PERI_SC_PERIPH_CTRL13, data);
+	do {
+		data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
+	} while (!(data & PERI_RST0_MMC0));
+
+	/* unreset mmc0 clock domain */
+	mmio_write_32(PERI_SC_PERIPH_RSTDIS0, PERI_RST0_MMC0);
+	do {
+		data = mmio_read_32(PERI_SC_PERIPH_RSTSTAT0);
+	} while (data & PERI_RST0_MMC0);
+}
+
+static void hikey_boardid_init(void)
+{
+	u_register_t midr;
+
+	midr = read_midr();
+	mmio_write_32(MEMORY_AXI_CHIP_ADDR, midr);
+	INFO("[BDID] [%x] midr: 0x%x\n", MEMORY_AXI_CHIP_ADDR,
+	     (unsigned int)midr);
+
+	mmio_write_32(MEMORY_AXI_BOARD_TYPE_ADDR, 0);
+	mmio_write_32(MEMORY_AXI_BOARD_ID_ADDR, 0x2b);
+
+	mmio_write_32(ACPU_ARM64_FLAGA, 0x1234);
+	mmio_write_32(ACPU_ARM64_FLAGB, 0x5678);
+}
+
+static void hikey_sd_init(void)
+{
+	/* switch pinmux to SD */
+	mmio_write_32(IOMG_SD_CLK, IOMG_MUX_FUNC0);
+	mmio_write_32(IOMG_SD_CMD, IOMG_MUX_FUNC0);
+	mmio_write_32(IOMG_SD_DATA0, IOMG_MUX_FUNC0);
+	mmio_write_32(IOMG_SD_DATA1, IOMG_MUX_FUNC0);
+	mmio_write_32(IOMG_SD_DATA2, IOMG_MUX_FUNC0);
+	mmio_write_32(IOMG_SD_DATA3, IOMG_MUX_FUNC0);
+
+	mmio_write_32(IOCG_SD_CLK, IOCG_INPUT_16MA);
+	mmio_write_32(IOCG_SD_CMD, IOCG_INPUT_12MA);
+	mmio_write_32(IOCG_SD_DATA0, IOCG_INPUT_12MA);
+	mmio_write_32(IOCG_SD_DATA1, IOCG_INPUT_12MA);
+	mmio_write_32(IOCG_SD_DATA2, IOCG_INPUT_12MA);
+	mmio_write_32(IOCG_SD_DATA3, IOCG_INPUT_12MA);
+
+	/* set SD Card detect as nopull */
+	mmio_write_32(IOCG_GPIO8, 0);
+}
+
+static void hikey_jumper_init(void)
+{
+	/* set jumper detect as nopull */
+	mmio_write_32(IOCG_GPIO24, 0);
+	/* set jumper detect as GPIO */
+	mmio_write_32(IOMG_GPIO24, IOMG_MUX_FUNC0);
+}
+
+void bl2_early_platform_setup(meminfo_t *mem_layout)
+{
+	dw_mmc_params_t params;
+
+	/* Initialize the console to provide early debug support */
+	console_init(CONSOLE_BASE, PL011_UART_CLK_IN_HZ, PL011_BAUDRATE);
+
+	/* Setup the BL2 memory layout */
+	bl2_tzram_layout = *mem_layout;
+
+	/* Clear SRAM since it'll be used by MCU right now. */
+	memset((void *)SRAM_BASE, 0, SRAM_SIZE);
+
+	sp804_timer_init(SP804_TIMER0_BASE, 10, 192);
+	dsb();
+	hikey_ddr_init();
+
+	hikey_boardid_init();
+	init_acpu_dvfs();
+	hikey_sd_init();
+	hikey_jumper_init();
+
+	reset_dwmmc_clk();
+	memset(&params, 0, sizeof(dw_mmc_params_t));
+	params.reg_base = DWMMC0_BASE;
+	params.desc_base = HIKEY_MMC_DESC_BASE;
+	params.desc_size = 1 << 20;
+	params.clk_rate = 24 * 1000 * 1000;
+	params.bus_width = EMMC_BUS_WIDTH_8;
+	params.flags = EMMC_FLAG_CMD23;
+	dw_mmc_init(&params);
+
+	hikey_io_setup();
+}
+
+void bl2_plat_arch_setup(void)
+{
+	hikey_init_mmu_el1(bl2_tzram_layout.total_base,
+			   bl2_tzram_layout.total_size,
+			   BL2_RO_BASE,
+			   BL2_RO_LIMIT,
+			   BL2_COHERENT_RAM_BASE,
+			   BL2_COHERENT_RAM_LIMIT);
+}
+
+void bl2_platform_setup(void)
+{
+}
diff --git a/plat/hisilicon/hikey/hikey_ddr.c b/plat/hisilicon/hikey/hikey_ddr.c
new file mode 100644
index 00000000..6328eb69
--- /dev/null
+++ b/plat/hisilicon/hikey/hikey_ddr.c
@@ -0,0 +1,967 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <debug.h>
+#include <errno.h>
+#include <hi6220.h>
+#include <hi6553.h>
+#include <mmio.h>
+#include <sp804_delay_timer.h>
+
+enum {
+	DDR_FREQ_533M = 0,
+	DDR_FREQ_800M,
+};
+
+static void init_pll(void)
+{
+	unsigned int data;
+
+	data = mmio_read_32((0xf7032000 + 0x000));
+	data |= 0x1;
+	mmio_write_32((0xf7032000 + 0x000), data);
+	dsb();
+	do {
+		data = mmio_read_32((0xf7032000 + 0x000));
+	} while (!(data & (1 << 28)));
+
+	data = mmio_read_32((0xf7800000 + 0x000));
+	data &= ~0x007;
+	data |= 0x004;
+	mmio_write_32((0xf7800000 + 0x000), data);
+	dsb();
+	do {
+		data = mmio_read_32((0xf7800000 + 0x014));
+		data &= 0x007;
+	} while (data != 0x004);
+
+	mmio_write_32(PERI_SC_PERIPH_CTRL14, 0x2101);
+	data = mmio_read_32(PERI_SC_PERIPH_STAT1);
+	mmio_write_32(0xf7032000 + 0x02c, 0x5110103e);
+	data = mmio_read_32(0xf7032000 + 0x050);
+	data |= 1 << 28;
+	mmio_write_32(0xf7032000 + 0x050, data);
+	mmio_write_32(PERI_SC_PERIPH_CTRL14, 0x2101);
+	mdelay(1);
+	data = mmio_read_32(PERI_SC_PERIPH_STAT1);
+	NOTICE("syspll frequency:%dHz\n", data);
+}
+
+static void init_freq(void)
+{
+	unsigned int data, tmp;
+	unsigned int cpuext_cfg, ddr_cfg;
+
+	mmio_write_32((0xf7032000 + 0x374), 0x4a);
+	mmio_write_32((0xf7032000 + 0x368), 0xda);
+	mmio_write_32((0xf7032000 + 0x36c), 0x01);
+	mmio_write_32((0xf7032000 + 0x370), 0x01);
+	mmio_write_32((0xf7032000 + 0x360), 0x60);
+	mmio_write_32((0xf7032000 + 0x364), 0x60);
+
+	mmio_write_32((0xf7032000 + 0x114), 0x1000);
+
+	data = mmio_read_32((0xf7032000 + 0x110));
+	data |= (3 << 12);
+	mmio_write_32((0xf7032000 + 0x110), data);
+
+	data = mmio_read_32((0xf7032000 + 0x110));
+	data |= (1 << 4);
+	mmio_write_32((0xf7032000 + 0x110), data);
+
+
+	data = mmio_read_32((0xf7032000 + 0x110));
+	data &= ~0x7;
+	data |= 0x5;
+	mmio_write_32((0xf7032000 + 0x110), data);
+	dsb();
+	mdelay(10);
+
+
+	do {
+		data = mmio_read_32((0xf6504000 + 0x008));
+		data &= (3 << 20);
+	} while (data != (3 << 20));
+	dsb();
+	mdelay(10);
+
+
+	data = mmio_read_32((0xf6504000 + 0x054));
+	data &= ~((1 << 0) | (1 << 11));
+	mmio_write_32((0xf6504000 + 0x054), data);
+	mdelay(10);
+
+	data = mmio_read_32((0xf7032000 + 0x104));
+	data &= ~(3 << 8);
+	data |= (1 << 8);
+	mmio_write_32((0xf7032000 + 0x104), data);
+
+	data = mmio_read_32((0xf7032000 + 0x100));
+	data |= (1 << 0);
+	mmio_write_32((0xf7032000 + 0x100), data);
+	dsb();
+
+	do {
+		data = mmio_read_32((0xf7032000 + 0x100));
+		data &= (1 << 2);
+	} while (data != (1 << 2));
+
+	data = mmio_read_32((0xf6504000 + 0x06c));
+	data &= ~0xffff;
+	data |= 0x56;
+	mmio_write_32((0xf6504000 + 0x06c), data);
+
+	data = mmio_read_32((0xf6504000 + 0x06c));
+	data &= ~(0xffffff << 8);
+	data |= 0xc7a << 8;
+	mmio_write_32((0xf6504000 + 0x06c), data);
+
+	data = mmio_read_32((0xf6504000 + 0x058));
+	data &= ((1 << 13) - 1);
+	data |= 0xccb;
+	mmio_write_32((0xf6504000 + 0x058), data);
+
+	mmio_write_32((0xf6504000 + 0x060), 0x1fff);
+	mmio_write_32((0xf6504000 + 0x064), 0x1ffffff);
+	mmio_write_32((0xf6504000 + 0x068), 0x7fffffff);
+	mmio_write_32((0xf6504000 + 0x05c), 0x1);
+
+	data = mmio_read_32((0xf6504000 + 0x054));
+	data &= ~(0xf << 12);
+	data |= 1 << 12;
+	mmio_write_32((0xf6504000 + 0x054), data);
+	dsb();
+
+
+	data = mmio_read_32((0xf7032000 + 0x000));
+	data &= ~(1 << 0);
+	mmio_write_32((0xf7032000 + 0x000), data);
+
+	mmio_write_32((0xf7032000 + 0x004), 0x5110207d);
+	mmio_write_32((0xf7032000 + 0x134), 0x10000005);
+	data = mmio_read_32((0xf7032000 + 0x134));
+
+
+	data = mmio_read_32((0xf7032000 + 0x000));
+	data |= (1 << 0);
+	mmio_write_32((0xf7032000 + 0x000), data);
+
+	mmio_write_32((0xf7032000 + 0x368), 0x100da);
+	data = mmio_read_32((0xf7032000 + 0x378));
+	data &= ~((1 << 7) - 1);
+	data |= 0x6b;
+	mmio_write_32((0xf7032000 + 0x378), data);
+	dsb();
+	do {
+		data = mmio_read_32((0xf7032000 + 0x378));
+		tmp = data & 0x7f;
+		data = (data & (0x7f << 8)) >> 8;
+		if (data != tmp)
+			continue;
+		data = mmio_read_32((0xf7032000 + 0x37c));
+	} while (!(data & 1));
+
+	data = mmio_read_32((0xf7032000 + 0x104));
+	data &= ~((3 << 0) |
+			(3 << 8));
+	cpuext_cfg = 1;
+	ddr_cfg = 1;
+	data |= cpuext_cfg | (ddr_cfg << 8);
+	mmio_write_32((0xf7032000 + 0x104), data);
+	dsb();
+
+	do {
+		data = mmio_read_32((0xf7032000 + 0x104));
+		tmp = (data & (3 << 16)) >> 16;
+		if (cpuext_cfg != tmp)
+			continue;
+		tmp = (data & (3 << 24)) >> 24;
+		if (ddr_cfg != tmp)
+			continue;
+		data = mmio_read_32((0xf7032000 + 0x000));
+		data &= 1 << 28;
+	} while (!data);
+
+	data = mmio_read_32((0xf7032000 + 0x100));
+	data &= ~(1 << 0);
+	mmio_write_32((0xf7032000 + 0x100), data);
+	dsb();
+	do {
+		data = mmio_read_32((0xf7032000 + 0x100));
+		data &= (1 << 1);
+	} while (data != (1 << 1));
+	mdelay(1000);
+
+	data = mmio_read_32((0xf6504000 + 0x054));
+	data &= ~(1 << 28);
+	mmio_write_32((0xf6504000 + 0x054), data);
+	dsb();
+
+	data = mmio_read_32((0xf7032000 + 0x110));
+	data &= ~((1 << 4) |
+			(3 << 12));
+	mmio_write_32((0xf7032000 + 0x110), data);
+}
+
+int cat_533mhz_800mhz(void)
+{
+	unsigned int data, i;
+	unsigned int bdl[5];
+
+
+	data = mmio_read_32((0xf712c000 + 0x1c8));
+	data &= 0xfffff0f0;
+	data |= 0x100f0f;
+	mmio_write_32((0xf712c000 + 0x1c8), data);
+
+	for (i = 0; i < 0x20; i++) {
+		mmio_write_32((0xf712c000 + 0x1d4), 0xc0000);
+		data = (i << 0x10) + i;
+		mmio_write_32((0xf712c000 + 0x140), data);
+		mmio_write_32((0xf712c000 + 0x144), data);
+		mmio_write_32((0xf712c000 + 0x148), data);
+		mmio_write_32((0xf712c000 + 0x14c), data);
+		mmio_write_32((0xf712c000 + 0x150), data);
+
+
+		data = mmio_read_32((0xf712c000 + 0x070));
+		data |= 0x80000;
+		mmio_write_32((0xf712c000 + 0x070), data);
+		data = mmio_read_32((0xf712c000 + 0x070));
+		data &= 0xfff7ffff;
+		mmio_write_32((0xf712c000 + 0x070), data);
+
+
+		mmio_write_32((0xf712c000 + 0x004), 0x8000);
+		mmio_write_32((0xf712c000 + 0x004), 0x0);
+		mmio_write_32((0xf712c000 + 0x004), 0x801);
+		do {
+			data = mmio_read_32((0xf712c000 + 0x004));
+		} while (data & 1);
+
+		data = mmio_read_32((0xf712c000 + 0x008));
+		if (!(data & 0x400)) {
+			mdelay(10);
+			return 0;
+		}
+		WARN("lpddr3 cat fail\n");
+		data = mmio_read_32((0xf712c000 + 0x1d4));
+		if ((data & 0x1f00) && ((data & 0x1f) == 0)) {
+			bdl[0] = mmio_read_32((0xf712c000 + 0x140));
+			bdl[1] = mmio_read_32((0xf712c000 + 0x144));
+			bdl[2] = mmio_read_32((0xf712c000 + 0x148));
+			bdl[3] = mmio_read_32((0xf712c000 + 0x14c));
+			bdl[4] = mmio_read_32((0xf712c000 + 0x150));
+			if ((!(bdl[0] & 0x1f001f)) || (!(bdl[1] & 0x1f001f)) ||
+					(!(bdl[2] & 0x1f001f)) || (!(bdl[3] & 0x1f001f)) ||
+					(!(bdl[4] & 0x1f001f))) {
+				WARN("lpddr3 cat deskew error\n");
+				if (i == 0x1f) {
+					WARN("addrnbdl is max\n");
+					return -EINVAL;
+				}
+				mmio_write_32((0xf712c000 + 0x008), 0x400);
+			} else {
+				WARN("lpddr3 cat other error1\n");
+				return -EINVAL;
+			}
+		} else {
+			WARN("lpddr3 cat other error2\n");
+			return -EINVAL;
+		}
+	}
+	return -EINVAL;
+}
+
+static void ddrx_rdet(void)
+{
+	unsigned int data, rdet, bdl[4];
+
+	data = mmio_read_32((0xf712c000 + 0x0d0));
+	data &= 0xf800ffff;
+	data |= 0x8f0000;
+	mmio_write_32((0xf712c000 + 0x0d0), data);
+
+	data = mmio_read_32((0xf712c000 + 0x0dc));
+	data &= 0xfffffff0;
+	data |= 0xf;
+	mmio_write_32((0xf712c000 + 0x0dc), data);
+
+
+	data = mmio_read_32((0xf712c000 + 0x070));
+	data |= 0x80000;
+	mmio_write_32((0xf712c000 + 0x070), data);
+	data = mmio_read_32((0xf712c000 + 0x070));
+	data &= 0xfff7ffff;
+	mmio_write_32((0xf712c000 + 0x070), data);
+
+	mmio_write_32((0xf712c000 + 0x004), 0x8000);
+	mmio_write_32((0xf712c000 + 0x004), 0);
+
+	data = mmio_read_32((0xf712c000 + 0x0d0));
+	data &= ~0xf0000000;
+	data |= 0x80000000;
+	mmio_write_32((0xf712c000 + 0x0d0), data);
+
+	mmio_write_32((0xf712c000 + 0x004), 0x101);
+	do {
+		data = mmio_read_32((0xf712c000 + 0x004));
+	} while (!(data & 1));
+	data = mmio_read_32((0xf712c000 + 0x008));
+	if (data & 0x100)
+		WARN("rdet lbs fail\n");
+
+	bdl[0] = mmio_read_32((0xf712c000 + 0x22c)) & 0x7f;
+	bdl[1] = mmio_read_32((0xf712c000 + 0x2ac)) & 0x7f;
+	bdl[2] = mmio_read_32((0xf712c000 + 0x32c)) & 0x7f;
+	bdl[3] = mmio_read_32((0xf712c000 + 0x3ac)) & 0x7f;
+	do {
+		data = mmio_read_32((0xf712c000 + 0x22c));
+		data &= ~0x7f;
+		data |= bdl[0];
+		mmio_write_32((0xf712c000 + 0x22c), data);
+		data = mmio_read_32((0xf712c000 + 0x2ac));
+		data &= ~0x7f;
+		data |= bdl[1];
+		mmio_write_32((0xf712c000 + 0x2ac), data);
+		data = mmio_read_32((0xf712c000 + 0x32c));
+		data &= ~0x7f;
+		data |= bdl[2];
+		mmio_write_32((0xf712c000 + 0x32c), data);
+		data = mmio_read_32((0xf712c000 + 0x3ac));
+		data &= ~0x7f;
+		data |= bdl[3];
+		mmio_write_32((0xf712c000 + 0x3ac), data);
+
+
+		data = mmio_read_32((0xf712c000 + 0x070));
+		data |= 0x80000;
+		mmio_write_32((0xf712c000 + 0x070), data);
+		data = mmio_read_32((0xf712c000 + 0x070));
+		data &= 0xfff7ffff;
+		mmio_write_32((0xf712c000 + 0x070), data);
+
+		mmio_write_32((0xf712c000 + 0x004), 0x8000);
+		mmio_write_32((0xf712c000 + 0x004), 0);
+
+		data = mmio_read_32((0xf712c000 + 0x0d0));
+		data &= ~0xf0000000;
+		data |= 0x40000000;
+		mmio_write_32((0xf712c000 + 0x0d0), data);
+		mmio_write_32((0xf712c000 + 0x004), 0x101);
+		do {
+			data = mmio_read_32((0xf712c000 + 0x004));
+		} while (data & 1);
+
+		data = mmio_read_32((0xf712c000 + 0x008));
+		rdet = data & 0x100;
+		if (rdet) {
+			INFO("rdet ds fail\n");
+			mmio_write_32((0xf712c000 + 0x008), 0x100);
+		}
+		bdl[0]++;
+		bdl[1]++;
+		bdl[2]++;
+		bdl[3]++;
+	} while (rdet);
+
+	data = mmio_read_32((0xf712c000 + 0x0d0));
+	data &= ~0xf0000000;
+	data |= 0x30000000;
+	mmio_write_32((0xf712c000 + 0x0d0), data);
+
+	mmio_write_32((0xf712c000 + 0x004), 0x101);
+	do {
+		data = mmio_read_32((0xf712c000 + 0x004));
+	} while (data & 1);
+	data = mmio_read_32((0xf712c000 + 0x008));
+	if (data & 0x100)
+		INFO("rdet rbs av fail\n");
+}
+
+static void ddrx_wdet(void)
+{
+	unsigned int data, wdet, zero_bdl, dq[4];
+	int i;
+
+	data = mmio_read_32((0xf712c000 + 0x0d0));
+	data &= ~0xf;
+	data |= 0xf;
+	mmio_write_32((0xf712c000 + 0x0d0), data);
+
+	data = mmio_read_32((0xf712c000 + 0x070));
+	data |= 0x80000;
+	mmio_write_32((0xf712c000 + 0x070), data);
+	data = mmio_read_32((0xf712c000 + 0x070));
+	data &= ~0x80000;
+	mmio_write_32((0xf712c000 + 0x070), data);
+
+	mmio_write_32((0xf712c000 + 0x004), 0x8000);
+	mmio_write_32((0xf712c000 + 0x004), 0);
+	data = mmio_read_32((0xf712c000 + 0x0d0));
+	data &= ~0xf000;
+	data |= 0x8000;
+	mmio_write_32((0xf712c000 + 0x0d0), data);
+	mmio_write_32((0xf712c000 + 0x004), 0x201);
+	do {
+		data = mmio_read_32((0xf712c000 + 0x004));
+	} while (data & 1);
+	data = mmio_read_32((0xf712c000 + 0x008));
+	if (data & 0x200)
+		INFO("wdet lbs fail\n");
+
+	dq[0] = mmio_read_32((0xf712c000 + 0x234)) & 0x1f00;
+	dq[1] = mmio_read_32((0xf712c000 + 0x2b4)) & 0x1f00;
+	dq[2] = mmio_read_32((0xf712c000 + 0x334)) & 0x1f00;
+	dq[3] = mmio_read_32((0xf712c000 + 0x3b4)) & 0x1f00;
+
+	do {
+		mmio_write_32((0xf712c000 + 0x234), dq[0]);
+		mmio_write_32((0xf712c000 + 0x2b4), dq[1]);
+		mmio_write_32((0xf712c000 + 0x334), dq[2]);
+		mmio_write_32((0xf712c000 + 0x3b4), dq[3]);
+
+		data = mmio_read_32((0xf712c000 + 0x070));
+		data |= 0x80000;
+		mmio_write_32((0xf712c000 + 0x070), data);
+		data = mmio_read_32((0xf712c000 + 0x070));
+		data &= ~0x80000;
+		mmio_write_32((0xf712c000 + 0x070), data);
+		mmio_write_32((0xf712c000 + 0x004), 0x8000);
+		mmio_write_32((0xf712c000 + 0x004), 0);
+
+		data = mmio_read_32((0xf712c000 + 0x0d0));
+		data &= ~0xf000;
+		data |= 0x4000;
+		mmio_write_32((0xf712c000 + 0x0d0), data);
+		mmio_write_32((0xf712c000 + 0x004), 0x201);
+		do {
+			data = mmio_read_32((0xf712c000 + 0x004));
+		} while (data & 1);
+
+		data = mmio_read_32((0xf712c000 + 0x008));
+		wdet = data & 0x200;
+		if (wdet) {
+			INFO("wdet ds fail\n");
+			mmio_write_32((0xf712c000 + 0x008), 0x200);
+		}
+		mdelay(10);
+
+		for (i = 0; i < 4; i++) {
+			data = mmio_read_32((0xf712c000 + 0x210 + i * 0x80));
+			if ((!(data & 0x1f)) || (!(data & 0x1f00)) ||
+					(!(data & 0x1f0000)) || (!(data & 0x1f000000)))
+				zero_bdl = 1;
+			data = mmio_read_32((0xf712c000 + 0x214 + i * 0x80));
+			if ((!(data & 0x1f)) || (!(data & 0x1f00)) ||
+					(!(data & 0x1f0000)) || (!(data & 0x1f000000)))
+				zero_bdl = 1;
+			data = mmio_read_32((0xf712c000 + 0x218 + i * 0x80));
+			if (!(data & 0x1f))
+				zero_bdl = 1;
+			if (zero_bdl) {
+				if (i == 0)
+					dq[0] = dq[0] - 0x100;
+				if (i == 1)
+					dq[1] = dq[1] - 0x100;
+				if (i == 2)
+					dq[2] = dq[2] - 0x100;
+				if (i == 3)
+					dq[3] = dq[3] - 0x100;
+			}
+		}
+	} while (wdet);
+
+	data = mmio_read_32((0xf712c000 + 0x0d0));
+	data &= ~0xf000;
+	data |= 0x3000;
+	mmio_write_32((0xf712c000 + 0x0d0), data);
+	mmio_write_32((0xf712c000 + 0x004), 0x201);
+	do {
+		data = mmio_read_32((0xf712c000 + 0x004));
+	} while (data & 1);
+	data = mmio_read_32((0xf712c000 + 0x008));
+	if (data & 0x200)
+		INFO("wdet rbs av fail\n");
+}
+
+static void set_ddrc_533mhz(void)
+{
+	unsigned int data;
+
+	mmio_write_32((0xf7032000 + 0x580), 0x3);
+	mmio_write_32((0xf7032000 + 0x5a8), 0x11111);
+	data = mmio_read_32((0xf7032000 + 0x104));
+	data |= 0x100;
+	mmio_write_32((0xf7032000 + 0x104), data);
+
+	mmio_write_32((0xf7030000 + 0x050), 0x30);
+	mmio_write_32((0xf7030000 + 0x240), 0x5ffff);
+	mmio_write_32((0xf7030000 + 0x344), 0xf5ff);
+	mmio_write_32((0xf712c000 + 0x00c), 0x400);
+	mmio_write_32((0xf712c000 + 0x018), 0x7);
+	mmio_write_32((0xf712c000 + 0x090), 0x6400000);
+	mmio_write_32((0xf712c000 + 0x258), 0x640);
+	mmio_write_32((0xf712c000 + 0x2d8), 0x640);
+	mmio_write_32((0xf712c000 + 0x358), 0x640);
+	mmio_write_32((0xf712c000 + 0x3d8), 0x640);
+	mmio_write_32((0xf712c000 + 0x018), 0x0);
+	mmio_write_32((0xf712c000 + 0x0b0), 0xf00000f);
+	mmio_write_32((0xf712c000 + 0x0b4), 0xf);
+	mmio_write_32((0xf712c000 + 0x088), 0x3fff801);
+	mmio_write_32((0xf712c000 + 0x070), 0x8940000);
+
+	data = mmio_read_32((0xf712c000 + 0x078));
+	data |= 4;
+	mmio_write_32((0xf712c000 + 0x078), data);
+	mmio_write_32((0xf712c000 + 0x01c), 0x8000080);
+	data = mmio_read_32((0xf712c000 + 0x020));
+	data &= 0xfffffffe;
+	mmio_write_32((0xf712c000 + 0x020), data);
+	mmio_write_32((0xf712c000 + 0x1d4), 0xc0000);
+	mmio_write_32((0xf712c000 + 0x010), 0x500000f);
+	mmio_write_32((0xf712c000 + 0x014), 0x10);
+	data = mmio_read_32((0xf712c000 + 0x1e4));
+	data &= 0xffffff00;
+	mmio_write_32((0xf712c000 + 0x1e4), data);
+	mmio_write_32((0xf712c000 + 0x030), 0x9dd87855);
+	mmio_write_32((0xf712c000 + 0x034), 0xa7138bb);
+	mmio_write_32((0xf712c000 + 0x038), 0x20091477);
+	mmio_write_32((0xf712c000 + 0x03c), 0x84534e16);
+	mmio_write_32((0xf712c000 + 0x040), 0x3008817);
+	mmio_write_32((0xf712c000 + 0x064), 0x106c3);
+	mmio_write_32((0xf712c000 + 0x068), 0xff0a0000);
+	data = mmio_read_32((0xf712c000 + 0x070));
+	data &= 0xffff0000;
+	data |= 0x305;
+	mmio_write_32((0xf712c000 + 0x070), data);
+	data = mmio_read_32((0xf712c000 + 0x048));
+	data |= 0x40000000;
+	mmio_write_32((0xf712c000 + 0x048), data);
+	data = mmio_read_32((0xf712c000 + 0x020));
+	data &= ~0x10;
+	mmio_write_32((0xf712c000 + 0x020), data);
+	data = mmio_read_32((0xf712c000 + 0x080));
+	data &= ~0x2000;
+	mmio_write_32((0xf712c000 + 0x080), data);
+	mmio_write_32((0xf712c000 + 0x270), 0x3);
+	mmio_write_32((0xf712c000 + 0x2f0), 0x3);
+	mmio_write_32((0xf712c000 + 0x370), 0x3);
+	mmio_write_32((0xf712c000 + 0x3f0), 0x3);
+	mmio_write_32((0xf712c000 + 0x048), 0xd0420900);
+
+	mmio_write_32((0xf7128000 + 0x040), 0x0);
+	mmio_write_32((0xf712c000 + 0x004), 0x140f);
+	do {
+		data = mmio_read_32((0xf712c000 + 0x004));
+	} while (data & 1);
+	data = mmio_read_32((0xf712c000 + 0x008));
+	if (data & 0x7fe) {
+		NOTICE("failed to init lpddr3 rank0 dram phy\n");
+		return;
+	}
+	NOTICE("succeed to init lpddr3 rank0 dram phy\n");
+}
+
+static void set_ddrc_800mhz(void)
+{
+	unsigned int data;
+
+	mmio_write_32((0xf7032000 + 0x580), 0x2);
+	mmio_write_32((0xf7032000 + 0x5a8), 0x1003);
+	data = mmio_read_32((0xf7032000 + 0x104));
+	data &= 0xfffffcff;
+	mmio_write_32((0xf7032000 + 0x104), data);
+
+	mmio_write_32((0xf7030000 + 0x050), 0x30);
+	mmio_write_32((0xf7030000 + 0x240), 0x5ffff);
+	mmio_write_32((0xf7030000 + 0x344), 0xf5ff);
+	mmio_write_32((0xf712c000 + 0x00c), 0x400);
+	mmio_write_32((0xf712c000 + 0x018), 0x7);
+	mmio_write_32((0xf712c000 + 0x090), 0x5400000);
+	mmio_write_32((0xf712c000 + 0x258), 0x540);
+	mmio_write_32((0xf712c000 + 0x2d8), 0x540);
+	mmio_write_32((0xf712c000 + 0x358), 0x540);
+	mmio_write_32((0xf712c000 + 0x3d8), 0x540);
+	mmio_write_32((0xf712c000 + 0x018), 0x0);
+	mmio_write_32((0xf712c000 + 0x0b0), 0xf00000f);
+	mmio_write_32((0xf712c000 + 0x0b4), 0xf);
+	mmio_write_32((0xf712c000 + 0x088), 0x3fff801);
+	mmio_write_32((0xf712c000 + 0x070), 0x8940000);
+
+	data = mmio_read_32((0xf712c000 + 0x078));
+	data |= 4;
+	mmio_write_32((0xf712c000 + 0x078), data);
+	mmio_write_32((0xf712c000 + 0x01c), 0x8000080);
+	data = mmio_read_32((0xf712c000 + 0x020));
+	data &= 0xfffffffe;
+	mmio_write_32((0xf712c000 + 0x020), data);
+	mmio_write_32((0xf712c000 + 0x1d4), 0xc0000);
+	mmio_write_32((0xf712c000 + 0x010), 0x500000f);
+	mmio_write_32((0xf712c000 + 0x014), 0x10);
+	data = mmio_read_32((0xf712c000 + 0x1e4));
+	data &= 0xffffff00;
+	mmio_write_32((0xf712c000 + 0x1e4), data);
+	mmio_write_32((0xf712c000 + 0x030), 0xe663ab77);
+	mmio_write_32((0xf712c000 + 0x034), 0xea952db);
+	mmio_write_32((0xf712c000 + 0x038), 0x200d1cb1);
+	mmio_write_32((0xf712c000 + 0x03c), 0xc67d0721);
+	mmio_write_32((0xf712c000 + 0x040), 0x3008aa1);
+	mmio_write_32((0xf712c000 + 0x064), 0x11a43);
+	mmio_write_32((0xf712c000 + 0x068), 0xff0a0000);
+	data = mmio_read_32((0xf712c000 + 0x070));
+	data &= 0xffff0000;
+	data |= 0x507;
+	mmio_write_32((0xf712c000 + 0x070), data);
+	data = mmio_read_32((0xf712c000 + 0x048));
+	data |= 0x40000000;
+	mmio_write_32((0xf712c000 + 0x048), data);
+	data = mmio_read_32((0xf712c000 + 0x020));
+	data &= 0xffffffef;
+	mmio_write_32((0xf712c000 + 0x020), data);
+	data = mmio_read_32((0xf712c000 + 0x080));
+	data &= 0xffffdfff;
+	mmio_write_32((0xf712c000 + 0x080), data);
+	mmio_write_32((0xf712c000 + 0x270), 0x3);
+	mmio_write_32((0xf712c000 + 0x2f0), 0x3);
+	mmio_write_32((0xf712c000 + 0x370), 0x3);
+	mmio_write_32((0xf712c000 + 0x3f0), 0x3);
+	mmio_write_32((0xf712c000 + 0x048), 0xd0420900);
+
+	mmio_write_32((0xf7128000 + 0x040), 0x2001);
+	mmio_write_32((0xf712c000 + 0x004), 0x140f);
+	do {
+		data = mmio_read_32((0xf712c000 + 0x004));
+	} while (data & 1);
+	data = mmio_read_32((0xf712c000 + 0x008));
+	if (data & 0x7fe) {
+		WARN("failed to init lpddr3 rank0 dram phy\n");
+		return;
+	}
+}
+
+static void ddrc_common_init(int ddr800)
+{
+	unsigned int data;
+
+	mmio_write_32((0xf7120000 + 0x020), 0x1);
+	mmio_write_32((0xf7120000 + 0x100), 0x1700);
+	mmio_write_32((0xf7120000 + 0x104), 0x71040004);
+	mmio_write_32((0xf7121400 + 0x104), 0xf);
+	mmio_write_32((0xf7121800 + 0x104), 0xf);
+	mmio_write_32((0xf7121800 + 0x104), 0xf);
+	mmio_write_32((0xf7121c00 + 0x104), 0xf);
+	mmio_write_32((0xf7122000 + 0x104), 0xf);
+	mmio_write_32((0xf7128000 + 0x02c), 0x6);
+	mmio_write_32((0xf7128000 + 0x020), 0x1);
+	mmio_write_32((0xf7128000 + 0x028), 0x310201);
+	mmio_write_32((0xf712c000 + 0x1e4), 0xfe007600);
+	mmio_write_32((0xf7128000 + 0x01c), 0xaf001);
+
+
+	data = mmio_read_32((0xf7128000 + 0x280));
+	data |= 1 << 7;
+	mmio_write_32((0xf7128000 + 0x280), data);
+	mmio_write_32((0xf7128000 + 0x244), 0x3);
+
+	if (ddr800)
+		mmio_write_32((0xf7128000 + 0x240), 167 * 400000 / 1024);
+	else
+		mmio_write_32((0xf7128000 + 0x240), 167 * 533000 / 1024);
+
+	data = mmio_read_32((0xf712c000 + 0x080));
+	data &= 0xffff;
+	data |= 0x4002000;
+	mmio_write_32((0xf712c000 + 0x080), data);
+	mmio_write_32((0xf7128000 + 0x000), 0x0);
+	do {
+		data = mmio_read_32((0xf7128000 + 0x294));
+	} while (data & 1);
+	mmio_write_32((0xf7128000 + 0x000), 0x2);
+}
+
+
+static int dienum_det_and_rowcol_cfg(void)
+{
+	unsigned int data;
+
+	mmio_write_32((0xf7128000 + 0x210), 0x87);
+	mmio_write_32((0xf7128000 + 0x218), 0x10000);
+	mmio_write_32((0xf7128000 + 0x00c), 0x1);
+	do {
+		data = mmio_read_32((0xf7128000 + 0x00c));
+	} while (data & 1);
+	data = mmio_read_32((0xf7128000 + 0x4a8)) & 0xfc;
+	switch (data) {
+	case 0x18:
+		mmio_write_32((0xf7128000 + 0x060), 0x132);
+		mmio_write_32((0xf7128000 + 0x064), 0x132);
+		mmio_write_32((0xf7120000 + 0x100), 0x1600);
+		mmio_write_32((0xf7120000 + 0x104), 0x71040004);
+		break;
+	case 0x1c:
+		mmio_write_32((0xf7128000 + 0x060), 0x142);
+		mmio_write_32((0xf7128000 + 0x064), 0x142);
+		mmio_write_32((0xf7120000 + 0x100), 0x1700);
+		mmio_write_32((0xf7120000 + 0x104), 0x71040004);
+		break;
+	case 0x58:
+		mmio_write_32((0xf7128000 + 0x060), 0x133);
+		mmio_write_32((0xf7128000 + 0x064), 0x133);
+		mmio_write_32((0xf7120000 + 0x100), 0x1700);
+		mmio_write_32((0xf7120000 + 0x104), 0x71040004);
+		break;
+	default:
+		break;
+	}
+	if (!data)
+		return -EINVAL;
+	return 0;
+}
+
+static int detect_ddr_chip_info(void)
+{
+	unsigned int data, mr5, mr6, mr7;
+
+	mmio_write_32((0xf7128000 + 0x210), 0x57);
+	mmio_write_32((0xf7128000 + 0x218), 0x10000);
+	mmio_write_32((0xf7128000 + 0x00c), 0x1);
+
+	do {
+		data = mmio_read_32((0xf7128000 + 0x00c));
+	} while (data & 1);
+
+	data = mmio_read_32((0xf7128000 + 0x4a8));
+	mr5 = data & 0xff;
+	switch (mr5) {
+	case 1:
+		INFO("Samsung DDR\n");
+		break;
+	case 6:
+		INFO("Hynix DDR\n");
+		break;
+	case 3:
+		INFO("Elpida DDR\n");
+		break;
+	default:
+		INFO("DDR from other vendors\n");
+		break;
+	}
+
+	mmio_write_32((0xf7128000 + 0x210), 0x67);
+	mmio_write_32((0xf7128000 + 0x218), 0x10000);
+	mmio_write_32((0xf7128000 + 0x00c), 0x1);
+	do {
+		data = mmio_read_32((0xf7128000 + 0x00c));
+	} while (data & 1);
+	data = mmio_read_32((0xf7128000 + 0x4a8));
+	mr6 = data & 0xff;
+	mmio_write_32((0xf7128000 + 0x210), 0x77);
+	mmio_write_32((0xf7128000 + 0x218), 0x10000);
+	mmio_write_32((0xf7128000 + 0x00c), 0x1);
+	do {
+		data = mmio_read_32((0xf7128000 + 0x00c));
+	} while (data & 1);
+	data = mmio_read_32((0xf7128000 + 0x4a8));
+	mr7 = data & 0xff;
+	data = mr5 + (mr6 << 8) + (mr7 << 16);
+	return data;
+}
+
+int lpddr3_freq_init(int freq)
+{
+	unsigned int data;
+
+	if (freq == DDR_FREQ_800M) {
+		set_ddrc_800mhz();
+		INFO("%s, set ddrc 800mhz\n", __func__);
+	} else {
+		set_ddrc_533mhz();
+		INFO("%s, set ddrc 533mhz\n", __func__);
+	}
+
+	mmio_write_32((0xf712c000 + 0x004), 0xf1);
+	if (freq == DDR_FREQ_800M)
+		mmio_write_32((0xf7128000 + 0x050), 0x100023);
+	else
+		mmio_write_32((0xf7128000 + 0x050), 0x100123);
+	mmio_write_32((0xf7128000 + 0x060), 0x133);
+	mmio_write_32((0xf7128000 + 0x064), 0x133);
+	mmio_write_32((0xf7128000 + 0x200), 0xa1000);
+
+	if (freq == DDR_FREQ_800M) {
+		mmio_write_32((0xf7128000 + 0x100), 0x755a9d12);
+		mmio_write_32((0xf7128000 + 0x104), 0x1753b055);
+		mmio_write_32((0xf7128000 + 0x108), 0x7401505f);
+		mmio_write_32((0xf7128000 + 0x10c), 0x578ca244);
+		mmio_write_32((0xf7128000 + 0x110), 0x10700000);
+		mmio_write_32((0xf7128000 + 0x114), 0x13141306);
+	} else {
+		mmio_write_32((0xf7128000 + 0x100), 0xb77b6718);
+		mmio_write_32((0xf7128000 + 0x104), 0x1e82a071);
+		mmio_write_32((0xf7128000 + 0x108), 0x9501c07e);
+		mmio_write_32((0xf7128000 + 0x10c), 0xaf50c255);
+		mmio_write_32((0xf7128000 + 0x110), 0x10b00000);
+		mmio_write_32((0xf7128000 + 0x114), 0x13181908);
+	}
+	mmio_write_32((0xf7128000 + 0x118), 0x44);
+	do {
+		data = mmio_read_32((0xf712c000 + 0x004));
+	} while (data & 1);
+
+	data = mmio_read_32((0xf712c000 + 0x008));
+	if (data & 0x7fe) {
+		NOTICE("fail to init ddr3 rank0\n");
+		return -EFAULT;
+	}
+	INFO("init ddr3 rank0\n");
+	ddrx_rdet();
+	ddrx_wdet();
+
+	data = mmio_read_32((0xf712c000 + 0x048));
+	data |= 1;
+	mmio_write_32((0xf712c000 + 0x048), data);
+	mmio_write_32((0xf712c000 + 0x004), 0x21);
+	do {
+		data = mmio_read_32((0xf712c000 + 0x004));
+	} while (data & 1);
+
+	data = mmio_read_32((0xf712c000 + 0x008));
+	if (data & 0x7fe)
+		NOTICE("ddr3 rank1 init failure\n");
+	else
+		INFO("ddr3 rank1 init pass\n");
+
+	data = mmio_read_32((0xf712c000 + 0x048));
+	data &= ~0xf;
+	mmio_write_32((0xf712c000 + 0x048), data);
+	return 0;
+}
+
+static void init_ddr(int freq)
+{
+	unsigned int data;
+	int ret;
+
+
+	data = mmio_read_32((0xf7032000 + 0x030));
+	data |= 1;
+	mmio_write_32((0xf7032000 + 0x030), data);
+	data = mmio_read_32((0xf7032000 + 0x010));
+	data |= 1;
+	mmio_write_32((0xf7032000 + 0x010), data);
+
+	udelay(100);
+	do {
+		data = mmio_read_32((0xf7032000 + 0x030));
+		data &= 3 << 28;
+	} while (data != (3 << 28));
+	do {
+		data = mmio_read_32((0xf7032000 + 0x010));
+		data &= 3 << 28;
+	} while (data != (3 << 28));
+
+	ret = lpddr3_freq_init(freq);
+	if (ret)
+		return;
+}
+
+static void init_ddrc_qos(void)
+{
+	unsigned int port, data;
+
+	mmio_write_32((0xf7124000 + 0x088), 1);
+
+	port = 0;
+	mmio_write_32((0xf7120000 + 0x200 + port * 0x10), 0x1210);
+	mmio_write_32((0xf7120000 + 0x204 + port * 0x10), 0x11111111);
+	mmio_write_32((0xf7120000 + 0x208 + port * 0x10), 0x11111111);
+	mmio_write_32((0xf7120000 + 0x400 + 0 * 0x10), 0x001d0007);
+
+	for (port = 3; port <= 4; port++) {
+		mmio_write_32((0xf7120000 + 0x200 + port * 0x10), 0x1210);
+		mmio_write_32((0xf7120000 + 0x204 + port * 0x10), 0x77777777);
+		mmio_write_32((0xf7120000 + 0x208 + port * 0x10), 0x77777777);
+	}
+
+	port = 1;
+	mmio_write_32((0xf7120000 + 0x200 + port * 0x10), 0x30000);
+	mmio_write_32((0xf7120000 + 0x204 + port * 0x10), 0x1234567);
+	mmio_write_32((0xf7120000 + 0x208 + port * 0x10), 0x1234567);
+
+	mmio_write_32((0xf7124000 + 0x1f0), 0);
+	mmio_write_32((0xf7124000 + 0x0bc), 0x3020100);
+	mmio_write_32((0xf7124000 + 0x0d0), 0x3020100);
+	mmio_write_32((0xf7124000 + 0x1f4), 0x01000100);
+	mmio_write_32((0xf7124000 + 0x08c + 0 * 4), 0xd0670402);
+	mmio_write_32((0xf7124000 + 0x068 + 0 * 4), 0x31);
+	mmio_write_32((0xf7124000 + 0x000), 0x7);
+
+	data = mmio_read_32((0xf7124000 + 0x09c));
+	data &= ~0xff0000;
+	data |= 0x400000;
+	mmio_write_32((0xf7124000 + 0x09c), data);
+	data = mmio_read_32((0xf7124000 + 0x0ac));
+	data &= ~0xff0000;
+	data |= 0x400000;
+	mmio_write_32((0xf7124000 + 0x0ac), data);
+	port = 2;
+	mmio_write_32((0xf7120000 + 0x200 + port * 0x10), 0x30000);
+	mmio_write_32((0xf7120000 + 0x204 + port * 0x10), 0x1234567);
+	mmio_write_32((0xf7120000 + 0x208 + port * 0x10), 0x1234567);
+
+
+	mmio_write_32((0xf7124000 + 0x09c), 0xff7fff);
+	mmio_write_32((0xf7124000 + 0x0a0), 0xff);
+	mmio_write_32((0xf7124000 + 0x0ac), 0xff7fff);
+	mmio_write_32((0xf7124000 + 0x0b0), 0xff);
+	mmio_write_32((0xf7124000 + 0x0bc), 0x3020100);
+	mmio_write_32((0xf7124000 + 0x0d0), 0x3020100);
+}
+
+static void ddr_phy_reset(void)
+{
+	mmio_write_32(0xf7030340, 0xa000);
+	mmio_write_32(0xf7030344, 0xa000);
+}
+
+void hikey_ddr_init(void)
+{
+	uint32_t data;
+
+	init_pll();
+	init_freq();
+
+	/*
+	 * Init DDR with 533MHz. Otherwise, DDR initialization
+	 * may fail on 800MHz on some boards.
+	 */
+	ddr_phy_reset();
+	init_ddr(DDR_FREQ_533M);
+	/* Init DDR with 800MHz. */
+	ddr_phy_reset();
+	init_ddr(DDR_FREQ_800M);
+
+
+	ddrc_common_init(1);
+	dienum_det_and_rowcol_cfg();
+	detect_ddr_chip_info();
+
+	data = mmio_read_32(0xf7032000 + 0x010);
+	data &= ~0x1;
+	mmio_write_32(0xf7032000 + 0x010, data);
+	data = mmio_read_32(0xf7032000 + 0x010);
+
+	/*
+	 * Test memory access. Do not use address 0x0 because the compiler
+	 * may assume it is not a valid address and generate incorrect code
+	 * (GCC 4.9.1 without -fno-delete-null-pointer-checks for instance).
+	 */
+	mmio_write_32(0x4, 0xa5a55a5a);
+	INFO("ddr test value:0x%x\n", mmio_read_32(0x4));
+	init_ddrc_qos();
+}
diff --git a/plat/hisilicon/hikey/hisi_dvfs.c b/plat/hisilicon/hikey/hisi_dvfs.c
new file mode 100644
index 00000000..0d4f893b
--- /dev/null
+++ b/plat/hisilicon/hikey/hisi_dvfs.c
@@ -0,0 +1,778 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <hi6220.h>
+#include <hi6553.h>
+#include <hisi_sram_map.h>
+#include <mmio.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <string.h>
+
+#define ACPU_FREQ_MAX_NUM		5
+#define	ACPU_OPP_NUM			7
+
+#define ACPU_VALID_VOLTAGE_MAGIC	(0x5A5AC5C5)
+
+#define ACPU_WAIT_TIMEOUT		(200)
+#define ACPU_WAIT_FOR_WFI_TIMOUT	(2000)
+#define ACPU_DFS_STATE_CNT		(0x10000)
+
+struct acpu_dvfs_sram_stru {
+	unsigned int magic;
+	unsigned int support_freq_num;
+	unsigned int support_freq_max;
+	unsigned int start_prof;
+	unsigned int vol[ACPU_OPP_NUM];
+};
+
+struct acpu_volt_cal_para {
+	unsigned int freq;
+	unsigned int ul_vol;
+	unsigned int dl_vol;
+	unsigned int core_ref_hpm;
+};
+
+struct ddr_volt_cal_para {
+	unsigned int freq;
+	unsigned int ul_vol;
+	unsigned int dl_vol;
+	unsigned int ddr_ref_hpm;
+};
+
+struct acpu_dvfs_opp_para {
+	unsigned int freq;
+	unsigned int acpu_clk_profile0;
+	unsigned int acpu_clk_profile1;
+	unsigned int acpu_vol_profile;
+	unsigned int acpu_pll_freq;
+	unsigned int acpu_pll_frac;
+};
+
+unsigned int efuse_acpu_freq[] = {
+	1200000, 1250000, 1300000, 1350000,
+	1400000, 1450000, 1500000, 1550000,
+	1600000, 1650000, 1700000, 1750000,
+	1800000, 1850000, 1900000, 1950000,
+};
+
+struct acpu_dvfs_opp_para hi6220_acpu_profile[] = {
+	{ 208000,  0x61E5, 0x022, 0x3A, 0x5220102B, 0x05555555 },
+	{ 432000,  0x10A6, 0x121, 0x3A, 0x5120102D, 0x10000005 },
+	{ 729000,  0x2283, 0x100, 0x4A, 0x51101026, 0x10000005 },
+	{ 960000,  0x1211, 0x100, 0x5B, 0x51101032, 0x10000005 },
+	{ 1200000, 0x1211, 0x100, 0x6B, 0x5110207D, 0x10000005 },
+	{ 1400000, 0x1211, 0x100, 0x6B, 0x51101049, 0x10000005 },
+	{ 1500000, 0x1211, 0x100, 0x6B, 0x51101049, 0x10000005 },
+};
+
+struct acpu_dvfs_opp_para *acpu_dvfs_profile = hi6220_acpu_profile;
+struct acpu_dvfs_sram_stru *acpu_dvfs_sram_buf =
+	(struct acpu_dvfs_sram_stru *)MEMORY_AXI_ACPU_FREQ_VOL_ADDR;
+
+static inline void write_reg_mask(uintptr_t addr,
+				  uint32_t val, uint32_t mask)
+{
+	uint32_t reg;
+
+	reg = mmio_read_32(addr);
+	reg = (reg & ~(mask)) | val;
+	mmio_write_32(addr, reg);
+}
+
+static inline uint32_t read_reg_mask(uintptr_t addr,
+				     uint32_t mask, uint32_t offset)
+{
+	uint32_t reg;
+
+	reg = mmio_read_32(addr);
+	reg &= (mask << offset);
+	return (reg >> offset);
+}
+
+static int acpu_dvfs_syspll_cfg(unsigned int prof_id)
+{
+	uint32_t reg0 = 0;
+	uint32_t count = 0;
+	uint32_t clk_div_status = 0;
+
+	/*
+	 * step 1:
+	 *  - ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x3;
+	 *  - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x1;
+	 */
+	write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x3 << 12, 0x3 << 12);
+	write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x1 << 4,  0x1 << 4);
+
+	/*
+	 * step 2:
+	 *  - ACPUSYSPLLCFG.acpu_syspll_div_cfg:
+	 *     208MHz, set to 0x5;
+	 *     500MHz, set to 0x2;
+	 *     other opps set to 0x1
+	 */
+	if (prof_id == 0)
+		write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x5 << 0, 0x7 << 0);
+	else if (prof_id == 1)
+		write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x2 << 0, 0x7 << 0);
+	else
+		write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x1 << 0, 0x7 << 0);
+
+	/*
+	 * step 3:
+	 *  - Polling ACPU_SC_CPU_STAT.clk_div_status_vd == 0x3;
+	 *  - ACPU_SC_VD_CTRL.tune_en_dif = 0
+	 *  - ACPU_SC_VD_CTRL.tune_en_int = 0
+	 *  - PMCTRL_ACPUCLKDIV.acpu_ddr_clk_div_cfg = 0x1
+	 *  - PMCTRL_ACPUPLLSEL.acpu_pllsw_cfg = 0x1
+	 */
+	clk_div_status = 0x3;
+	do {
+		reg0 = read_reg_mask(ACPU_SC_CPU_STAT, 0x3, 20);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: clk div status timeout!\n", __func__);
+			return -1;
+		}
+	} while (clk_div_status != reg0);
+
+	write_reg_mask(ACPU_SC_VD_CTRL, 0x0, (0x1 << 0) | (0x1 << 11));
+	write_reg_mask(PMCTRL_ACPUCLKDIV, 0x1 << 8, 0x3 << 8);
+	write_reg_mask(PMCTRL_ACPUPLLSEL, 0x1 << 0, 0x1 << 0);
+
+	return 0;
+}
+
+static void acpu_dvfs_clk_div_cfg(unsigned int prof_id,
+				  unsigned int *cpuext_cfg,
+				  unsigned int *acpu_ddr_cfg)
+{
+	if (prof_id == 0) {
+		write_reg_mask(PMCTRL_ACPUCLKDIV,
+			(0x1 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) |
+			(0x1 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START),
+			(0x3 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) |
+			(0x3 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START));
+		*cpuext_cfg = 0x1;
+		*acpu_ddr_cfg = 0x1;
+	} else if (prof_id == 1) {
+		write_reg_mask(PMCTRL_ACPUCLKDIV,
+			(0x1 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) |
+			(0x1 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START),
+			(0x3 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) |
+			(0x3 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START));
+		*cpuext_cfg = 0x1;
+		*acpu_ddr_cfg = 0x1;
+	} else {
+		/* ddr has not been inited */
+		write_reg_mask(PMCTRL_ACPUCLKDIV,
+			(0x1 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) |
+			(0x0 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START),
+			(0x3 << SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_cfg_START) |
+			(0x3 << SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_cfg_START));
+		*cpuext_cfg = 0x1;
+		*acpu_ddr_cfg = 0x0;
+	}
+}
+
+static int acpu_dvfs_freq_ascend(unsigned int cur_prof, unsigned int tar_prof)
+{
+	unsigned int reg0 = 0;
+	unsigned int reg1 = 0;
+	unsigned int reg2 = 0;
+	unsigned int count = 0;
+	unsigned int cpuext_cfg_val = 0;
+	unsigned int acpu_ddr_cfg_val = 0;
+	int ret = 0;
+
+	/*
+	 * step 1:
+	 *  - PMCTRL_ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x3;
+	 *  - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x1;
+	 *
+	 * step 2:
+	 *  - PMCTRL_ACPUSYSPLLCFG.acpu_syspll_div_cfg = 0x5 (208MHz)
+	 *  - PMCTRL_ACPUSYSPLLCFG.acpu_syspll_div_cfg = 0x2 (500MHz)
+	 *  - PMCTRL_ACPUSYSPLLCFG.acpu_syspll_div_cfg = 0x1 (Other OPPs)
+	 *
+	 * step 3:
+	 *  - ACPU_SC_CPU_STAT.clk_div_status_vd = 0x3;
+	 *  - ACPU_SC_VD_CTRL.tune_en_dif = 0x0;
+	 *  - ACPU_SC_VD_CTRL.tune_en_int = 0x0;
+	 *  - PMCTRL_ACPUCLKDIV.acpu_ddr_clk_div_cfg = 0x1;
+	 *  - PMCTRL_ACPUPLLSEL.acpu_pllsw_cfg = 0x1
+	 */
+	ret = acpu_dvfs_syspll_cfg(cur_prof);
+	if (ret)
+		return -1;
+
+	/*
+	 * step 4:
+	 *  - Polling PMCTRL_ACPUPLLSEL.syspll_sw_stat == 0x1
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(PMCTRL_ACPUPLLSEL, 0x1,
+			SOC_PMCTRL_ACPUPLLSEL_syspll_sw_stat_START);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: syspll sw status timeout\n", __func__);
+			return -1;
+		}
+	} while (reg0 != 0x1);
+
+	/* Enable VD functionality if > 800MHz */
+	if (acpu_dvfs_profile[tar_prof].freq > 800000) {
+
+		write_reg_mask(ACPU_SC_VD_HPM_CTRL,
+			HPM_OSC_DIV_VAL, HPM_OSC_DIV_MASK);
+
+		/*
+		 * step 5:
+		 *  - ACPU_SC_VD_HPM_CTRL.hpm_dly_exp = 0xC7A;
+		 *  - ACPU_SC_VD_MASK_PATTERN_CTRL[12:0] = 0xCCB;
+		 */
+		write_reg_mask(ACPU_SC_VD_HPM_CTRL,
+			HPM_DLY_EXP_VAL, HPM_DLY_EXP_MASK);
+		write_reg_mask(ACPU_SC_VD_MASK_PATTERN_CTRL,
+			ACPU_SC_VD_MASK_PATTERN_VAL,
+			ACPU_SC_VD_MASK_PATTERN_MASK);
+
+		/*
+		 * step 6:
+		 *  - ACPU_SC_VD_DLY_TABLE0_CTRL = 0x1FFF;
+		 *  - ACPU_SC_VD_DLY_TABLE1_CTRL = 0x1FFFFFF;
+		 *  - ACPU_SC_VD_DLY_TABLE2_CTRL = 0x7FFFFFFF;
+		 *  - ACPU_SC_VD_DLY_FIXED_CTRL  = 0x1;
+		 */
+		mmio_write_32(ACPU_SC_VD_DLY_TABLE0_CTRL, 0x1FFF);
+		mmio_write_32(ACPU_SC_VD_DLY_TABLE1_CTRL, 0x1FFFFFF);
+		mmio_write_32(ACPU_SC_VD_DLY_TABLE2_CTRL, 0x7FFFFFFF);
+		mmio_write_32(ACPU_SC_VD_DLY_FIXED_CTRL, 0x1);
+
+		/*
+		 * step 7:
+		 *  - ACPU_SC_VD_CTRL.shift_table0 = 0x1;
+		 *  - ACPU_SC_VD_CTRL.shift_table1 = 0x3;
+		 *  - ACPU_SC_VD_CTRL.shift_table2 = 0x5;
+		 *  - ACPU_SC_VD_CTRL.shift_table3 = 0x6;
+		 *
+		 * step 8:
+		 *  - ACPU_SC_VD_CTRL.tune = 0x7;
+		 */
+		write_reg_mask(ACPU_SC_VD_CTRL,
+			ACPU_SC_VD_SHIFT_TABLE_TUNE_VAL,
+			ACPU_SC_VD_SHIFT_TABLE_TUNE_MASK);
+	}
+
+	/* step 9: ACPUPLLCTRL.acpupll_en_cfg = 0x0 */
+	write_reg_mask(PMCTRL_ACPUPLLCTRL, 0x0,
+		0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START);
+
+	/* step 10: set PMCTRL_ACPUPLLFREQ and PMCTRL_ACPUPLLFRAC */
+	mmio_write_32(PMCTRL_ACPUPLLFREQ,
+		acpu_dvfs_profile[tar_prof].acpu_pll_freq);
+	mmio_write_32(PMCTRL_ACPUPLLFRAC,
+		acpu_dvfs_profile[tar_prof].acpu_pll_frac);
+
+	/*
+	 * step 11:
+	 *  - wait for 1us;
+	 *  - PMCTRL_ACPUPLLCTRL.acpupll_en_cfg = 0x1
+	 */
+	count = 0;
+	while (count < ACPU_WAIT_TIMEOUT)
+		count++;
+
+	write_reg_mask(PMCTRL_ACPUPLLCTRL,
+		0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START,
+		0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START);
+
+	/* step 12: PMCTRL_ACPUVOLPMUADDR = 0x100da */
+	mmio_write_32(PMCTRL_ACPUVOLPMUADDR, 0x100da);
+
+	/*
+	 * step 13:
+	 *  - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x13 (208MHz);
+	 *  - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x13 (500MHz);
+	 *  - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x20 (798MHz);
+	 *  - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x3A (1300MHz);
+	 *  - PMCTRL_ACPUDESTVOL.acpu_dest_vol = 0x3A (1500MHz);
+	 */
+	write_reg_mask(PMCTRL_ACPUDESTVOL,
+		acpu_dvfs_profile[tar_prof].acpu_vol_profile,
+		((0x1 << (SOC_PMCTRL_ACPUDESTVOL_acpu_dest_vol_END + 1)) - 1));
+
+	/*
+	 * step 14:
+	 *  - Polling PMCTRL_ACPUDESTVOL.acpu_vol_using == ACPUDESTVOL.acpu_dest_vol
+	 *  - Polling ACPUVOLTIMEOUT.acpu_vol_timeout == 0x1
+	 *  - Config PMCTRL_ACPUCLKDIV.acpu_ddr_clk_div_cfg
+	 *  - Config ACPUCLKDIV.cpuext_clk_div_cfg;
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(PMCTRL_ACPUDESTVOL, 0x7F,
+			SOC_PMCTRL_ACPUDESTVOL_acpu_dest_vol_START);
+		reg1 = read_reg_mask(PMCTRL_ACPUDESTVOL, 0x7F,
+			SOC_PMCTRL_ACPUDESTVOL_acpu_vol_using_START);
+		reg2 = read_reg_mask(PMCTRL_ACPUVOLTTIMEOUT, 0x1,
+			SOC_PMCTRL_ACPUVOLTIMEOUT_acpu_vol_timeout_START);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: acpu destvol cfg timeout.\n", __func__);
+			return -1;
+		}
+	} while ((reg0 != reg1) || (reg2 != 0x1));
+
+	acpu_dvfs_clk_div_cfg(tar_prof, &cpuext_cfg_val, &acpu_ddr_cfg_val);
+
+	/*
+	 * step 15:
+	 *  - Polling PMCTRL_ACPUCLKDIV.cpuext_clk_div_stat;
+	 *  - Polling ACPUCLKDIV.acpu_ddr_clk_div_stat;
+	 *  - ACPUPLLCTRL.acpupll_timeout = 0x1;
+	 *  - PMCTRL_ACPUPLLSEL.acpu_pllsw_cfg = 0x0;
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(PMCTRL_ACPUCLKDIV, 0x3,
+			SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_stat_START);
+		reg1 = read_reg_mask(PMCTRL_ACPUCLKDIV, 0x3,
+			SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_stat_START);
+		reg2 = read_reg_mask(PMCTRL_ACPUPLLCTRL, 0x1,
+			SOC_PMCTRL_ACPUPLLCTRL_acpupll_timeout_START);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: acpu clk div cfg timeout.\n", __func__);
+			return -1;
+		}
+	} while ((reg1 != cpuext_cfg_val) ||
+		(reg0 != acpu_ddr_cfg_val) ||
+		(reg2 != 0x1));
+
+	write_reg_mask(PMCTRL_ACPUPLLSEL, 0x0,
+		0x1 << SOC_PMCTRL_ACPUPLLSEL_acpu_pllsw_cfg_START);
+
+	/*
+	 * step 16:
+	 *  - Polling PMCTRL_ACPUPLLSEL.acpupll_sw_stat == 0x1;
+	 *  - ACPU_SC_VD_CTRL.force_clk_en = 0x0;
+	 *  - ACPU_SC_VD_CTRL.clk_dis_cnt_en = 0x0;
+	 *  - ACPU_SC_VD_CTRL.calibrate_en_ini = 0x0;
+	 *  - ACPU_SC_VD_CTRL.calibrate_en_dif = 0x0;
+	 *  - ACPU_SC_VD_CTRL.div_en_dif = 0x1;
+	 *  - ACPU_SC_VD_CTRL.tune_en_int = 0x1;
+	 *  - ACPU_SC_VD_CTRL.tune_en_dif = 0x1;
+	 *  - PMCTRL_ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x0;
+	 *  - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x0;
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(PMCTRL_ACPUPLLSEL, 0x1,
+			SOC_PMCTRL_ACPUPLLSEL_acpu_pllsw_stat_START);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: acpu pll sw status timeout.\n", __func__);
+			return -1;
+		}
+	} while (reg0 != 0x1);
+
+	if (acpu_dvfs_profile[tar_prof].freq > 800000)
+		write_reg_mask(ACPU_SC_VD_CTRL,
+			ACPU_SC_VD_EN_ASIC_VAL, ACPU_SC_VD_EN_MASK);
+
+	write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x0,
+		(0x3 << SOC_PMCTRL_ACPUSYSPLLCFG_acpu_subsys_clk_div_sw_START) |
+		(0x1 << SOC_PMCTRL_ACPUSYSPLLCFG_acpu_syspll_clken_cfg_START));
+
+	return 0;
+}
+
+static int acpu_dvfs_freq_descend(unsigned int cur_prof, unsigned int tar_prof)
+{
+	unsigned int reg0 = 0;
+	unsigned int reg1 = 0;
+	unsigned int reg2 = 0;
+	unsigned int count = 0;
+	unsigned int cpuext_cfg_val = 0;
+	unsigned int acpu_ddr_cfg_val = 0;
+	int ret = 0;
+
+	ret = acpu_dvfs_syspll_cfg(tar_prof);
+	if (ret)
+		return -1;
+
+	/*
+	 * step 4:
+	 *  - Polling PMCTRL_ACPUPLLSEL.syspll_sw_stat == 0x1
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(PMCTRL_ACPUPLLSEL, 0x1, 2);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: syspll sw status timeout.\n", __func__);
+			return -1;
+		}
+	} while (reg0 != 0x1);
+
+	/*
+	 * Step 5:
+	 *  - PMCTRL_ACPUPLLCTRL.acpupll_en_cfg = 0x0
+	 */
+	write_reg_mask(PMCTRL_ACPUPLLCTRL, 0x0, 0x1 << 0);
+
+	/*
+	 * step 6
+	 *  - Config PMCTRL_ACPUPLLFREQ and ACPUPLLFRAC
+	 */
+	mmio_write_32(PMCTRL_ACPUPLLFREQ, acpu_dvfs_profile[tar_prof].acpu_pll_freq);
+	mmio_write_32(PMCTRL_ACPUPLLFRAC, acpu_dvfs_profile[tar_prof].acpu_pll_frac);
+
+	/*
+	 * step 7:
+	 *  - Wait 1us;
+	 *  - Config PMCTRL_ACPUPLLCTRL.acpupll_en_cfg = 0x1
+	 */
+	count = 0;
+	while (count < ACPU_WAIT_TIMEOUT)
+		count++;
+
+	write_reg_mask(PMCTRL_ACPUPLLCTRL,
+		0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START,
+		0x1 << SOC_PMCTRL_ACPUPLLCTRL_acpupll_en_cfg_START);
+
+	/* Enable VD functionality if > 800MHz */
+	if (acpu_dvfs_profile[tar_prof].freq > 800000) {
+
+		write_reg_mask(ACPU_SC_VD_HPM_CTRL,
+			HPM_OSC_DIV_VAL, HPM_OSC_DIV_MASK);
+
+		/*
+		 * step 9:
+		 *  - ACPU_SC_VD_HPM_CTRL.hpm_dly_exp = 0xC7A;
+		 *  - ACPU_SC_VD_MASK_PATTERN_CTRL[12:0] = 0xCCB;
+		 */
+		write_reg_mask(ACPU_SC_VD_HPM_CTRL,
+			HPM_DLY_EXP_VAL, HPM_DLY_EXP_MASK);
+		write_reg_mask(ACPU_SC_VD_MASK_PATTERN_CTRL,
+			ACPU_SC_VD_MASK_PATTERN_VAL,
+			ACPU_SC_VD_MASK_PATTERN_MASK);
+
+		/*
+		 * step 10:
+		 *  - ACPU_SC_VD_DLY_TABLE0_CTRL = 0x1FFF;
+		 *  - ACPU_SC_VD_DLY_TABLE1_CTRL = 0x1FFFFFF;
+		 *  - ACPU_SC_VD_DLY_TABLE2_CTRL = 0x7FFFFFFF;
+		 *  - ACPU_SC_VD_DLY_FIXED_CTRL  = 0x1;
+		 */
+		mmio_write_32(ACPU_SC_VD_DLY_TABLE0_CTRL, 0x1FFF);
+		mmio_write_32(ACPU_SC_VD_DLY_TABLE1_CTRL, 0x1FFFFFF);
+		mmio_write_32(ACPU_SC_VD_DLY_TABLE2_CTRL, 0x7FFFFFFF);
+		mmio_write_32(ACPU_SC_VD_DLY_FIXED_CTRL, 0x1);
+
+		/*
+		 * step 11:
+		 *  - ACPU_SC_VD_CTRL.shift_table0 = 0x1;
+		 *  - ACPU_SC_VD_CTRL.shift_table1 = 0x3;
+		 *  - ACPU_SC_VD_CTRL.shift_table2 = 0x5;
+		 *  - ACPU_SC_VD_CTRL.shift_table3 = 0x6;
+		 *
+		 * step 12:
+		 *  - ACPU_SC_VD_CTRL.tune = 0x7;
+		 */
+		write_reg_mask(ACPU_SC_VD_CTRL,
+			ACPU_SC_VD_SHIFT_TABLE_TUNE_VAL,
+			ACPU_SC_VD_SHIFT_TABLE_TUNE_MASK);
+	}
+
+	/*
+	 * step 13:
+	 *  - Pollig PMCTRL_ACPUPLLCTRL.acpupll_timeout == 0x1;
+	 *  - PMCTRL_ACPUPLLSEL.acpu_pllsw_cfg = 0x0;
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(PMCTRL_ACPUPLLCTRL, 0x1,
+			SOC_PMCTRL_ACPUPLLCTRL_acpupll_timeout_START);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: acpupll timeout.\n", __func__);
+			return -1;
+		}
+	} while (reg0 != 0x1);
+
+	write_reg_mask(PMCTRL_ACPUPLLSEL, 0x0,
+		0x1 << SOC_PMCTRL_ACPUPLLSEL_acpu_pllsw_cfg_START);
+
+	/*
+	 * step 14:
+	 *  - Polling PMCTRL_ACPUPLLSEL.acpupll_sw_stat == 0x1;
+	 *  - ACPU_SC_VD_CTRL.force_clk_en = 0x0;
+	 *  - ACPU_SC_VD_CTRL.clk_dis_cnt_en = 0x0;
+	 *  - ACPU_SC_VD_CTRL.calibrate_en_ini = 0x0;
+	 *  - ACPU_SC_VD_CTRL.calibrate_en_dif = 0x0;
+	 *  - ACPU_SC_VD_CTRL.div_en_dif = 0x1;
+	 *  - ACPU_SC_VD_CTRL.tune_en_int = 0x1;
+	 *  - ACPU_SC_VD_CTRL.tune_en_dif = 0x1;
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(PMCTRL_ACPUPLLSEL, 0x1,
+			SOC_PMCTRL_ACPUPLLSEL_acpu_pllsw_stat_START);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: acpupll sw status timeout.\n", __func__);
+			return -1;
+		}
+	} while (reg0 != 0x1);
+
+	if (acpu_dvfs_profile[tar_prof].freq > 800000)
+		write_reg_mask(ACPU_SC_VD_CTRL,
+			ACPU_SC_VD_EN_ASIC_VAL, ACPU_SC_VD_EN_MASK);
+
+	/*
+	 * step 15:
+	 *  - PMCTRL_ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x0;
+	 *  - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x0;
+	 */
+	write_reg_mask(PMCTRL_ACPUSYSPLLCFG, 0x0,
+		(0x3 << SOC_PMCTRL_ACPUSYSPLLCFG_acpu_subsys_clk_div_sw_START) |
+		(0x1 << SOC_PMCTRL_ACPUSYSPLLCFG_acpu_syspll_clken_cfg_START));
+
+	/*
+	 * step 16:
+	 *  - Polling ACPU_SC_CPU_STAT.clk_div_status_vd == 0x0;
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(ACPU_SC_CPU_STAT, 0x3,
+			ACPU_SC_CPU_STAT_CLK_DIV_STATUS_VD_SHIFT);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: clk div status timeout.\n", __func__);
+			return -1;
+		}
+	} while (reg0 != 0x0);
+
+	acpu_dvfs_clk_div_cfg(tar_prof, &cpuext_cfg_val, &acpu_ddr_cfg_val);
+
+	/*
+	 * step 17:
+	 *  - Polling PMCTRL_ACPUCLKDIV.cpuext_clk_div_stat;
+	 *  - Polling ACPUCLKDIV.acpu_ddr_clk_div_stat;
+	 *  - PMCTRL_ACPUVOLPMUADDR = 0x1006C;
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(PMCTRL_ACPUCLKDIV, 0x3,
+			SOC_PMCTRL_ACPUCLKDIV_cpuext_clk_div_stat_START);
+		reg1 = read_reg_mask(PMCTRL_ACPUCLKDIV, 0x3,
+			SOC_PMCTRL_ACPUCLKDIV_acpu_ddr_clk_div_stat_START);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: acpu clk div cfg timeout.\n", __func__);
+			return -1;
+		}
+	} while ((reg0 != cpuext_cfg_val) || (reg1 != acpu_ddr_cfg_val));
+
+	mmio_write_32(PMCTRL_ACPUVOLPMUADDR, 0x100da);
+
+	/*
+	 * step 16:
+	 *  - Polling PMCTRL_ACPUPLLSEL.acpupll_sw_stat == 0x1;
+	 *  - ACPU_SC_VD_CTRL.force_clk_en = 0x0;
+	 *  - ACPU_SC_VD_CTRL.clk_dis_cnt_en = 0x0;
+	 *  - ACPU_SC_VD_CTRL.calibrate_en_ini = 0x0;
+	 *  - ACPU_SC_VD_CTRL.calibrate_en_dif = 0x0;
+	 *  - ACPU_SC_VD_CTRL.div_en_dif = 0x1;
+	 *  - ACPU_SC_VD_CTRL.tune_en_int = 0x1;
+	 *  - ACPU_SC_VD_CTRL.tune_en_dif = 0x1;
+	 *  - PMCTRL_ACPUSYSPLLCFG.acpu_subsys_clk_div_sw = 0x0;
+	 *  - ACPUSYSPLLCFG.acpu_syspll_clken_cfg = 0x0;
+	 */
+	write_reg_mask(PMCTRL_ACPUDESTVOL,
+		acpu_dvfs_profile[tar_prof].acpu_vol_profile,
+		((0x1 << (SOC_PMCTRL_ACPUDESTVOL_acpu_dest_vol_END + 1)) - 1));
+
+	/*
+	 * step 19:
+	 *  - Polling PMCTRL_ACPUDESTVOL.acpu_vol_using == ACPUDESTVOL.acpu_dest_vol
+	 *  - ACPUVOLTIMEOUT.acpu_vol_timeout = 0x1;
+	 */
+	count = 0;
+	do {
+		reg0 = read_reg_mask(PMCTRL_ACPUDESTVOL, 0x7F,
+			SOC_PMCTRL_ACPUDESTVOL_acpu_dest_vol_START);
+		reg1 = read_reg_mask(PMCTRL_ACPUDESTVOL, 0x7F,
+			SOC_PMCTRL_ACPUDESTVOL_acpu_vol_using_START);
+		reg2 = read_reg_mask(PMCTRL_ACPUVOLTTIMEOUT, 0x1,
+			SOC_PMCTRL_ACPUVOLTIMEOUT_acpu_vol_timeout_START);
+		if ((count++) > ACPU_DFS_STATE_CNT) {
+			ERROR("%s: acpu destvol cfg timeout.\n", __func__);
+			return -1;
+		}
+	} while ((reg0 != reg1) || (reg2 != 0x1));
+
+	return 0;
+}
+
+int acpu_dvfs_target(unsigned int curr_prof, unsigned int target_prof)
+{
+	int ret = 0;
+
+	if (curr_prof == target_prof) {
+		INFO("%s: target_prof is equal curr_prof: is %d!\n",
+			__func__, curr_prof);
+		return 0;
+	}
+
+	if ((curr_prof >= ACPU_FREQ_MAX_NUM) ||
+	    (target_prof >= ACPU_FREQ_MAX_NUM)) {
+		INFO("%s: invalid parameter %d %d\n",
+			__func__, curr_prof, target_prof);
+		return -1;
+	}
+
+	if (target_prof > acpu_dvfs_sram_buf->support_freq_num)
+		target_prof = acpu_dvfs_sram_buf->support_freq_num;
+
+	if (target_prof < curr_prof)
+		ret = acpu_dvfs_freq_descend(curr_prof, target_prof);
+	else if (target_prof > curr_prof)
+		ret = acpu_dvfs_freq_ascend(curr_prof, target_prof);
+
+	if (ret) {
+		ERROR("%s: acpu_dvfs_target failed!\n", __func__);
+		return -1;
+	}
+
+	/* Complete acpu dvfs setting and set magic number */
+	acpu_dvfs_sram_buf->start_prof = target_prof;
+	acpu_dvfs_sram_buf->magic = ACPU_VALID_VOLTAGE_MAGIC;
+
+	mmio_write_32(DDR_DFS_FREQ_ADDR, 800000);
+	return 0;
+}
+
+static int acpu_dvfs_set_freq(void)
+{
+	unsigned int i;
+	unsigned int curr_prof;
+	unsigned int target_prof;
+	unsigned int max_freq = 0;
+
+	max_freq = acpu_dvfs_sram_buf->support_freq_max;
+
+	for (i = 0; i < acpu_dvfs_sram_buf->support_freq_num; i++) {
+
+		if (max_freq == hi6220_acpu_profile[i].freq) {
+			target_prof = i;
+			break;
+		}
+	}
+
+	if (i == acpu_dvfs_sram_buf->support_freq_num) {
+		ERROR("%s: cannot found max freq profile\n", __func__);
+		return -1;
+	}
+
+	curr_prof = 0;
+	target_prof = i;
+
+	/* if max freq is 208MHz, do nothing */
+	if (curr_prof == target_prof)
+		return 0;
+
+	if (acpu_dvfs_target(curr_prof, target_prof)) {
+		ERROR("%s: set acpu freq failed!", __func__);
+		return -1;
+	}
+
+	INFO("%s: support freq num is %d\n",
+		__func__, acpu_dvfs_sram_buf->support_freq_num);
+	INFO("%s: start prof is 0x%x\n",
+		__func__,  acpu_dvfs_sram_buf->start_prof);
+	INFO("%s: magic is 0x%x\n",
+		__func__, acpu_dvfs_sram_buf->magic);
+	INFO("%s: voltage:\n", __func__);
+	for (i = 0; i < acpu_dvfs_sram_buf->support_freq_num; i++)
+		INFO("  - %d: 0x%x\n", i, acpu_dvfs_sram_buf->vol[i]);
+
+	NOTICE("%s: set acpu freq success!", __func__);
+	return 0;
+}
+
+struct acpu_dvfs_volt_setting {
+	unsigned int magic;
+	unsigned int support_freq_num;
+	unsigned int support_freq_max;
+	unsigned int start_prof;
+	unsigned int vol[7];
+	unsigned int hmp_dly_threshold[7];
+};
+
+static void acpu_dvfs_volt_init(void)
+{
+	struct acpu_dvfs_volt_setting *volt;
+
+	/*
+	 * - set default voltage;
+	 * - set pmu address;
+	 * - set voltage up and down step;
+	 * - set voltage stable time;
+	 */
+	mmio_write_32(PMCTRL_ACPUDFTVOL, 0x4a);
+	mmio_write_32(PMCTRL_ACPUVOLPMUADDR, 0xda);
+	mmio_write_32(PMCTRL_ACPUVOLUPSTEP, 0x1);
+	mmio_write_32(PMCTRL_ACPUVOLDNSTEP, 0x1);
+	mmio_write_32(PMCTRL_ACPUPMUVOLUPTIME, 0x60);
+	mmio_write_32(PMCTRL_ACPUPMUVOLDNTIME, 0x60);
+	mmio_write_32(PMCTRL_ACPUCLKOFFCFG, 0x1000);
+
+	volt = (void *)MEMORY_AXI_ACPU_FREQ_VOL_ADDR;
+	volt->magic = 0x5a5ac5c5;
+	volt->support_freq_num = 5;
+	volt->support_freq_max = 1200000;
+	volt->start_prof = 4;
+	volt->vol[0] = 0x49;
+	volt->vol[1] = 0x49;
+	volt->vol[2] = 0x50;
+	volt->vol[3] = 0x60;
+	volt->vol[4] = 0x78;
+	volt->vol[5] = 0x78;
+	volt->vol[6] = 0x78;
+
+	volt->hmp_dly_threshold[0] = 0x0;
+	volt->hmp_dly_threshold[1] = 0x0;
+	volt->hmp_dly_threshold[2] = 0x0;
+	volt->hmp_dly_threshold[3] = 0x0e8b0e45;
+	volt->hmp_dly_threshold[4] = 0x10691023;
+	volt->hmp_dly_threshold[5] = 0x10691023;
+	volt->hmp_dly_threshold[6] = 0x10691023;
+
+	INFO("%s: success!\n", __func__);
+}
+
+void init_acpu_dvfs(void)
+{
+	unsigned int i = 0;
+
+	INFO("%s: pmic version %d\n", __func__,
+	     mmio_read_8(HI6553_VERSION_REG));
+
+	/* init parameters */
+	mmio_write_32(ACPU_CHIP_MAX_FREQ, efuse_acpu_freq[8]);
+	INFO("%s: ACPU_CHIP_MAX_FREQ=0x%x.\n",
+		__func__, mmio_read_32(ACPU_CHIP_MAX_FREQ));
+
+	/* set maximum support frequency to 1.2GHz */
+	for (i = 0; i < ACPU_FREQ_MAX_NUM; i++)
+		acpu_dvfs_sram_buf->vol[i] = hi6220_acpu_profile[i].acpu_vol_profile;
+
+	acpu_dvfs_sram_buf->support_freq_num = ACPU_FREQ_MAX_NUM;
+	acpu_dvfs_sram_buf->support_freq_max = 1200000;
+
+	/* init acpu dvfs */
+	acpu_dvfs_volt_init();
+	acpu_dvfs_set_freq();
+}
diff --git a/plat/hisilicon/hikey/hisi_mcu.c b/plat/hisilicon/hikey/hisi_mcu.c
new file mode 100644
index 00000000..359b94d7
--- /dev/null
+++ b/plat/hisilicon/hikey/hisi_mcu.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <assert.h>
+#include <bl_common.h>
+#include <console.h>
+#include <debug.h>
+#include <hi6220.h>
+#include <mmio.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <string.h>
+
+#define MCU_SECTION_MAX		30
+
+enum MCU_IMAGE_SEC_TYPE_ENUM {
+	MCU_IMAGE_SEC_TYPE_TEXT = 0,	/* text section */
+	MCU_IMAGE_SEC_TYPE_DATA,	/* data section */
+	MCU_IMAGE_SEC_TYPE_BUTT
+};
+
+enum MCU_IMAGE_SEC_LOAD_ENUM {
+	MCU_IMAGE_SEC_LOAD_STATIC = 0,
+	MCU_IMAGE_SEC_LOAD_DYNAMIC,
+	MCU_IMAGE_SEC_LOAD_BUFFER,
+	MCU_IMAGE_SEC_LOAD_MODEM_ENTRY,
+	MCU_IMAGE_SEC_LOAD_BUTT
+};
+
+struct mcu_image_sec {
+	unsigned short serial;
+	char type;
+	char load_attr;
+	uint32_t src_offset;		/* offset in image */
+	uint32_t dst_offset;		/* offset in memory */
+	uint32_t size;
+};
+
+struct mcu_image_head {
+	char time_stamp[24];
+	uint32_t image_size;
+	uint32_t secs_num;
+	struct mcu_image_sec secs[MCU_SECTION_MAX];
+};
+
+#define SOC_SRAM_M3_BASE_ADDR		(0xF6000000)
+
+#define MCU_SRAM_SIZE			(0x0000C000)
+#define MCU_CACHE_SIZE			(0x00004000)
+#define MCU_CODE_SIZE			(MCU_SRAM_SIZE - MCU_CACHE_SIZE)
+
+#define MCU_SYS_MEM_ADDR		(0x05E00000)
+#define MCU_SYS_MEM_SIZE		(0x00100000)
+
+static uint32_t mcu2ap_addr(uint32_t mcu_addr)
+{
+	if (mcu_addr < MCU_CODE_SIZE)
+		return (mcu_addr + SOC_SRAM_M3_BASE_ADDR);
+	else if ((mcu_addr >= MCU_SRAM_SIZE) &&
+		 (mcu_addr < MCU_SRAM_SIZE + MCU_SYS_MEM_SIZE))
+		return mcu_addr - MCU_SRAM_SIZE + MCU_SYS_MEM_ADDR;
+	else
+		return mcu_addr;
+}
+
+static int is_binary_header_invalid(struct mcu_image_head *head,
+				    unsigned int length)
+{
+	/* invalid cases */
+	if ((head->image_size == 0) ||
+	    (head->image_size > length) ||
+	    (head->secs_num > MCU_SECTION_MAX) ||
+	    (head->secs_num == 0))
+		return 1;
+
+	return 0;
+}
+
+static int is_binary_section_invalid(struct mcu_image_sec *sec,
+				     struct mcu_image_head *head)
+{
+	unsigned long ap_dst_offset = 0;
+
+	if ((sec->serial >= head->secs_num) ||
+	    (sec->src_offset + sec->size > head->image_size))
+		return 1;
+
+	if ((sec->type >= MCU_IMAGE_SEC_TYPE_BUTT) ||
+	    (sec->load_attr >= MCU_IMAGE_SEC_LOAD_BUTT))
+		return 1;
+
+	ap_dst_offset = mcu2ap_addr(sec->dst_offset);
+	if ((ap_dst_offset >= SOC_SRAM_M3_BASE_ADDR) &&
+	    (ap_dst_offset < SOC_SRAM_M3_BASE_ADDR + 0x20000 - sec->size))
+		return 0;
+	else if ((ap_dst_offset >= MCU_SYS_MEM_ADDR) &&
+		 (ap_dst_offset < MCU_SYS_MEM_ADDR + MCU_SYS_MEM_SIZE - sec->size))
+		return 0;
+	else if ((ap_dst_offset >= 0xfff8e000) &&
+		 (ap_dst_offset < 0xfff91c00 - sec->size))
+		return 0;
+
+	ERROR("%s: mcu destination address invalid.\n", __func__);
+	ERROR("%s: number=%d, dst offset=%d size=%d\n",
+		__func__, sec->serial, sec->dst_offset, sec->size);
+	return 1;
+}
+
+void hisi_mcu_enable_sram(void)
+{
+	mmio_write_32(AO_SC_PERIPH_CLKEN4,
+		      AO_SC_PERIPH_CLKEN4_HCLK_IPC_S |
+		      AO_SC_PERIPH_CLKEN4_HCLK_IPC_NS);
+
+	/* set register to enable dvfs which is used by mcu */
+	mmio_write_32(PERI_SC_RESERVED8_ADDR, 0x0A001022);
+
+	/* mcu mem is powered on, need de-assert reset */
+	mmio_write_32(AO_SC_PERIPH_RSTDIS4,
+		      AO_SC_PERIPH_RSTDIS4_RESET_MCU_ECTR_N);
+
+	/* enable mcu hclk */
+	mmio_write_32(AO_SC_PERIPH_CLKEN4,
+		      AO_SC_PERIPH_CLKEN4_HCLK_MCU |
+		      AO_SC_PERIPH_CLKEN4_CLK_MCU_DAP);
+}
+
+void hisi_mcu_start_run(void)
+{
+	unsigned int val;
+
+	/* set mcu ddr remap configuration */
+	mmio_write_32(AO_SC_MCU_SUBSYS_CTRL2, MCU_SYS_MEM_ADDR);
+
+	/* de-assert reset for mcu and to run */
+	mmio_write_32(AO_SC_PERIPH_RSTDIS4,
+		AO_SC_PERIPH_RSTDIS4_RESET_MCU_ECTR_N |
+		AO_SC_PERIPH_RSTDIS4_RESET_MCU_SYS_N |
+		AO_SC_PERIPH_RSTDIS4_RESET_MCU_POR_N |
+		AO_SC_PERIPH_RSTDIS4_RESET_MCU_DAP_N);
+
+	val = mmio_read_32(AO_SC_SYS_CTRL2);
+	mmio_write_32(AO_SC_SYS_CTRL2,
+		val | AO_SC_SYS_CTRL2_GLB_SRST_STAT_CLEAR);
+
+	INFO("%s: AO_SC_SYS_CTRL2=%x\n", __func__,
+		mmio_read_32(AO_SC_SYS_CTRL2));
+}
+
+int hisi_mcu_load_image(uintptr_t image_base, uint32_t image_size)
+{
+	unsigned int i;
+	struct mcu_image_head *head;
+	char *buf;
+
+	head = (struct mcu_image_head *)image_base;
+	if (is_binary_header_invalid(head, image_size)) {
+		ERROR("Invalid %s image header.\n", head->time_stamp);
+		return -1;
+	}
+
+	buf = (char *)head;
+	for (i = 0; i < head->secs_num; i++) {
+
+		int *src, *dst;
+
+		/* check the sections */
+		if (is_binary_section_invalid(&head->secs[i], head)) {
+			ERROR("Invalid mcu section.\n");
+			return -1;
+		}
+
+		/* check if the section is static-loaded */
+		if (head->secs[i].load_attr != MCU_IMAGE_SEC_LOAD_STATIC)
+			continue;
+
+		/* copy the sections */
+		src = (int *)(intptr_t)(buf + head->secs[i].src_offset);
+		dst = (int *)(intptr_t)mcu2ap_addr(head->secs[i].dst_offset);
+
+		memcpy((void *)dst, (void *)src, head->secs[i].size);
+
+		INFO("%s: mcu sections %d:\n", __func__, i);
+		INFO("%s:  src  = 0x%x\n",
+		     __func__, (unsigned int)(uintptr_t)src);
+		INFO("%s:  dst  = 0x%x\n",
+		     __func__, (unsigned int)(uintptr_t)dst);
+		INFO("%s:  size = %d\n", __func__, head->secs[i].size);
+
+		INFO("%s:  [SRC 0x%x] 0x%x 0x%x 0x%x 0x%x\n",
+		     __func__, (unsigned int)(uintptr_t)src,
+		     src[0], src[1], src[2], src[3]);
+		INFO("%s:  [DST 0x%x] 0x%x 0x%x 0x%x 0x%x\n",
+		     __func__, (unsigned int)(uintptr_t)dst,
+		     dst[0], dst[1], dst[2], dst[3]);
+	}
+
+	return 0;
+}
diff --git a/plat/hisilicon/hikey/include/hisi_mcu.h b/plat/hisilicon/hikey/include/hisi_mcu.h
new file mode 100644
index 00000000..f5c6ed0d
--- /dev/null
+++ b/plat/hisilicon/hikey/include/hisi_mcu.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef	__HISI_MCU_H__
+#define	__HISI_MCU_H__
+
+#include <stdint.h>
+
+extern void hisi_mcu_enable_sram(void);
+extern void hisi_mcu_start_run(void);
+extern int hisi_mcu_load_image(uintptr_t image_base, uint32_t image_size);
+
+#endif	/* __HISI_MCU_H__ */
diff --git a/plat/hisilicon/hikey/include/hisi_sram_map.h b/plat/hisilicon/hikey/include/hisi_sram_map.h
new file mode 100644
index 00000000..ed90c7bf
--- /dev/null
+++ b/plat/hisilicon/hikey/include/hisi_sram_map.h
@@ -0,0 +1,327 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __HISI_SRAM_MAP_H__
+#define __HISI_SRAM_MAP_H__
+
+/*
+ * SRAM Memory Region Layout
+ *
+ *  +-----------------------+
+ *  |  Low Power Mode       | 7KB
+ *  +-----------------------+
+ *  |  Secure OS            | 64KB
+ *  +-----------------------+
+ *  |  Software Flag        | 1KB
+ *  +-----------------------+
+ *
+ */
+
+#define SOC_SRAM_OFF_BASE_ADDR		(0xFFF80000)
+
+/* PM Section: 7KB */
+#define SRAM_PM_ADDR			(SOC_SRAM_OFF_BASE_ADDR)
+#define SRAM_PM_SIZE			(0x00001C00)
+
+/* TEE OS Section: 64KB */
+#define SRAM_TEEOS_ADDR			(SRAM_PM_ADDR + SRAM_PM_SIZE)
+#define SRAM_TEEOS_SIZE			(0x00010000)
+
+/* General Use Section: 1KB */
+#define SRAM_GENERAL_ADDR		(SRAM_TEEOS_ADDR + SRAM_TEEOS_SIZE)
+#define SRAM_GENERAL_SIZE		(0x00000400)
+
+/*
+ * General Usage Section Layout:
+ *
+ *  +-----------------------+
+ *  |  AP boot flag         | 64B
+ *  +-----------------------+
+ *  |  DICC flag            | 32B
+ *  +-----------------------+
+ *  |  Soft flag            | 256B
+ *  +-----------------------+
+ *  |  Thermal flag         | 128B
+ *  +-----------------------+
+ *  |  CSHELL               | 4B
+ *  +-----------------------+
+ *  |  Uart Switching       | 4B
+ *  +-----------------------+
+ *  |  ICC                  | 1024B
+ *  +-----------------------+
+ *  |  Memory Management    | 1024B
+ *  +-----------------------+
+ *  |  IFC                  | 32B
+ *  +-----------------------+
+ *  |  HIFI                 | 32B
+ *  +-----------------------+
+ *  |  DDR capacity         | 4B
+ *  +-----------------------+
+ *  |  Reserved             |
+ *  +-----------------------+
+ *
+ */
+
+/* App Core Boot Flags */
+#define MEMORY_AXI_ACPU_START_ADDR		(SRAM_GENERAL_ADDR)
+#define MEMORY_AXI_ACPU_START_SIZE		(64)
+
+#define MEMORY_AXI_SRESET_FLAG_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0000)
+#define MEMORY_AXI_SECOND_CPU_BOOT_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0004)
+#define MEMORY_AXI_READY_FLAG_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0008)
+#define MEMORY_AXI_FASTBOOT_ENTRY_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x000C)
+#define MEMORY_AXI_PD_CHARGE_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0010)
+#define MEMORY_AXI_DBG_ALARM_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0014)
+#define MEMORY_AXI_CHIP_ADDR			(MEMORY_AXI_ACPU_START_ADDR + 0x0018)
+#define MEMORY_AXI_BOARD_TYPE_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x001C)
+#define MEMORY_AXI_BOARD_ID_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0020)
+#define MEMORY_AXI_CHARGETYPE_FLAG_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0024)
+#define MEMORY_AXI_COLD_START_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0028)
+#define MEMORY_AXI_ANDROID_REBOOT_FLAG_ADDR	(MEMORY_AXI_ACPU_START_ADDR + 0x002C)
+#define MEMORY_AXI_ACPU_WDTRST_REBOOT_FLAG_ADDR	(MEMORY_AXI_ACPU_START_ADDR + 0x0030)
+#define MEMORY_AXI_ABNRST_BITMAP_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0034)
+#define MEMORY_AXI_32K_CLK_TYPE_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x0038)
+#define AXI_MODEM_PANIC_FLAG_ADDR		(MEMORY_AXI_ACPU_START_ADDR + 0x003C)
+#define AXI_MODEM_PANIC_FLAG			(0x68697369)
+#define MEMORY_AXI_ACPU_END_ADDR		(AXI_MODEM_PANIC_FLAG_ADDR + 4)
+
+/* DICC Flags */
+#define MEMORY_AXI_DICC_ADDR			(MEMORY_AXI_ACPU_START_ADDR + MEMORY_AXI_ACPU_START_SIZE)
+#define MEMORY_AXI_DICC_SIZE			(32)
+
+#define MEMORY_AXI_SOFT_FLAG_ADDR		(MEMORY_AXI_DICC_ADDR + MEMORY_AXI_DICC_SIZE)
+#define MEMORY_AXI_SOFT_FLAG_SIZE		(256)
+
+/* Thermal Flags */
+#define MEMORY_AXI_TEMP_PROTECT_ADDR		(MEMORY_AXI_SOFT_FLAG_ADDR + MEMORY_AXI_SOFT_FLAG_SIZE)
+#define MEMORY_AXI_TEMP_PROTECT_SIZE		(128)
+
+/* CSHELL */
+#define MEMORY_AXI_USB_CSHELL_ADDR		(MEMORY_AXI_TEMP_PROTECT_ADDR + MEMORY_AXI_TEMP_PROTECT_SIZE)
+#define MEMORY_AXI_USB_CSHELL_SIZE		(4)
+
+/* Uart and A/C Shell Switch Flags */
+#define MEMORY_AXI_UART_INOUT_ADDR		(MEMORY_AXI_USB_CSHELL_ADDR + MEMORY_AXI_USB_CSHELL_SIZE)
+#define MEMORY_AXI_UART_INOUT_SIZE		(4)
+
+/* IFC Flags */
+#define MEMORY_AXI_IFC_ADDR			(MEMORY_AXI_UART_INOUT_ADDR + MEMORY_AXI_UART_INOUT_SIZE)
+#define MEMORY_AXI_IFC_SIZE			(32)
+
+/* HIFI Data */
+#define MEMORY_AXI_HIFI_ADDR			(MEMORY_AXI_IFC_ADDR + MEMORY_AXI_IFC_SIZE)
+#define MEMORY_AXI_HIFI_SIZE			(32)
+
+/* CONFIG Flags */
+#define MEMORY_AXI_CONFIG_ADDR			(MEMORY_AXI_HIFI_ADDR + MEMORY_AXI_HIFI_SIZE)
+#define MEMORY_AXI_CONFIG_SIZE			(32)
+
+/* DDR Capacity Flags */
+#define MEMORY_AXI_DDR_CAPACITY_ADDR		(MEMORY_AXI_CONFIG_ADDR + MEMORY_AXI_CONFIG_SIZE)
+#define MEMORY_AXI_DDR_CAPACITY_SIZE		(4)
+
+/* USB Shell Flags */
+#define MEMORY_AXI_USB_SHELL_FLAG_ADDR		(MEMORY_AXI_DDR_CAPACITY_ADDR + MEMORY_AXI_DDR_CAPACITY_SIZE)
+#define MEMORY_AXI_USB_SHELL_FLAG_SIZE		(4)
+
+/* MCU WDT Switch Flag */
+#define MEMORY_AXI_MCU_WDT_FLAG_ADDR		(MEMORY_AXI_USB_SHELL_FLAG_ADDR + MEMORY_AXI_USB_SHELL_FLAG_SIZE)
+#define MEMORY_AXI_MCU_WDT_FLAG_SIZE		(4)
+
+/* TLDSP Mailbox MNTN */
+#define SRAM_DSP_MNTN_INFO_ADDR			(MEMORY_AXI_MCU_WDT_FLAG_ADDR + MEMORY_AXI_MCU_WDT_FLAG_SIZE)
+#define SRAM_DSP_MNTN_SIZE			(32)
+
+/* TLDSP ARM Mailbox Protect Flag */
+#define SRAM_DSP_ARM_MAILBOX_PROTECT_FLAG_ADDR	(SRAM_DSP_MNTN_INFO_ADDR + SRAM_DSP_MNTN_SIZE)
+#define SRAM_DSP_ARM_MAILBOX_PROTECT_FLAG_SIZE	(4)
+
+/* RTT Sleep Flag */
+#define SRAM_RTT_SLEEP_FLAG_ADDR                (SRAM_DSP_ARM_MAILBOX_PROTECT_FLAG_ADDR + SRAM_DSP_ARM_MAILBOX_PROTECT_FLAG_SIZE)
+#define SRAM_RTT_SLEEP_FLAG_SIZE                (32)
+
+/* LDSP Awake Flag */
+#define MEMORY_AXI_LDSP_AWAKE_ADDR              (SRAM_RTT_SLEEP_FLAG_ADDR + SRAM_RTT_SLEEP_FLAG_SIZE)
+#define MEMORY_AXI_LDSP_AWAKE_SIZE              (4)
+
+#define NVUPDATE_SUCCESS			0x5555AAAA
+#define NVUPDATE_FAILURE			0xAAAA5555
+
+/*
+ * Low Power Mode Region
+ */
+#define PWRCTRL_ACPU_ASM_SPACE_ADDR		(SRAM_PM_ADDR)
+#define PWRCTRL_ACPU_ASM_SPACE_SIZE		(SRAM_PM_SIZE)
+
+#define PWRCTRL_ACPU_ASM_MEM_BASE		(PWRCTRL_ACPU_ASM_SPACE_ADDR)
+#define PWRCTRL_ACPU_ASM_MEM_SIZE		(PWRCTRL_ACPU_ASM_SPACE_SIZE)
+#define PWRCTRL_ACPU_ASM_CODE_BASE		(PWRCTRL_ACPU_ASM_MEM_BASE + 0x200)
+#define PWRCTRL_ACPU_ASM_DATA_BASE		(PWRCTRL_ACPU_ASM_MEM_BASE + 0xE00)
+#define PWRCTRL_ACPU_ASM_DATA_SIZE		(0xE00)
+
+#define PWRCTRL_ACPU_ASM_D_C0_ADDR		(PWRCTRL_ACPU_ASM_DATA_BASE)
+#define PWRCTRL_ACPU_ASM_D_C0_MMU_PARA_AD	(PWRCTRL_ACPU_ASM_DATA_BASE + 0)
+#define PWRCTRL_ACPU_ASM_D_ARM_PARA_AD		(PWRCTRL_ACPU_ASM_DATA_BASE + 0x20)
+
+#define PWRCTRL_ACPU_ASM_D_COMM_ADDR		(PWRCTRL_ACPU_ASM_DATA_BASE + 0x700)
+
+#define PWRCTRL_ACPU_REBOOT			(PWRCTRL_ACPU_ASM_D_COMM_ADDR)
+#define PWRCTRL_ACPU_REBOOT_SIZE		(0x200)
+#define PWRCTRL_ACPU_ASM_SLICE_BAK_ADDR		(PWRCTRL_ACPU_REBOOT + PWRCTRL_ACPU_REBOOT_SIZE)
+#define PWRCTRL_ACPU_ASM_SLICE_BAK_SIZE		(4)
+#define PWRCTRL_ACPU_ASM_DEBUG_FLAG_ADDR	(PWRCTRL_ACPU_ASM_SLICE_BAK_ADDR + PWRCTRL_ACPU_ASM_SLICE_BAK_SIZE)
+#define PWRCTRL_ACPU_ASM_DEBUG_FLAG_SIZE	(4)
+#define EXCH_A_CORE_POWRCTRL_CONV_ADDR		(PWRCTRL_ACPU_ASM_DEBUG_FLAG_ADDR + PWRCTRL_ACPU_ASM_DEBUG_FLAG_SIZE)
+#define EXCH_A_CORE_POWRCTRL_CONV_SIZE		(4)
+
+/*
+ * Below region memory mapping is:
+ * 4 + 12 + 16 + 28 + 28 + 16 + 28 + 12 + 24 + 20 + 64 +
+ * 4 + 4 + 4 + 4 + 12 + 4 + 4 + 4 + 4 + 16 + 4 + 0x2BC +
+ * 24 + 20 + 12 + 16
+ */
+
+#define MEMORY_AXI_CPU_IDLE_ADDR		(EXCH_A_CORE_POWRCTRL_CONV_ADDR + EXCH_A_CORE_POWRCTRL_CONV_SIZE)
+#define MEMORY_AXI_CPU_IDLE_SIZE		(4)
+
+#define MEMORY_AXI_CUR_FREQ_ADDR		(MEMORY_AXI_CPU_IDLE_ADDR + MEMORY_AXI_CPU_IDLE_SIZE)
+#define MEMORY_AXI_CUR_FREQ_SIZE		(12)
+
+#define MEMORY_AXI_ACPU_FREQ_VOL_ADDR		(MEMORY_AXI_CUR_FREQ_ADDR + MEMORY_AXI_CUR_FREQ_SIZE)
+#define MEMORY_AXI_ACPU_FREQ_VOL_SIZE		(16 + 28 + 28)
+
+#define MEMORY_AXI_DDR_FREQ_VOL_ADDR		(MEMORY_AXI_ACPU_FREQ_VOL_ADDR + MEMORY_AXI_ACPU_FREQ_VOL_SIZE)
+#define MEMORY_AXI_DDR_FREQ_VOL_SIZE		(16 + 28)
+
+#define MEMORY_AXI_ACPU_FIQ_TEST_ADDR		(MEMORY_AXI_DDR_FREQ_VOL_ADDR + MEMORY_AXI_DDR_FREQ_VOL_SIZE)
+#define MEMORY_AXI_ACPU_FIQ_TEST_SIZE		(12)
+
+#define MEMORY_AXI_ACPU_FIQ_CPU_INFO_ADDR	(MEMORY_AXI_ACPU_FIQ_TEST_ADDR + MEMORY_AXI_ACPU_FIQ_TEST_SIZE)
+#define MEMORY_AXI_ACPU_FIQ_CPU_INFO_SIZE	(24)
+
+#define MEMORY_AXI_ACPU_FIQ_DEBUG_INFO_ADDR	(MEMORY_AXI_ACPU_FIQ_CPU_INFO_ADDR + MEMORY_AXI_ACPU_FIQ_CPU_INFO_SIZE)
+#define MEMORY_AXI_ACPU_FIQ_DEBUG_INFO_SIZE	(20)
+
+#define MEMORY_FREQDUMP_ADDR			(MEMORY_AXI_ACPU_FIQ_DEBUG_INFO_ADDR + MEMORY_AXI_ACPU_FIQ_DEBUG_INFO_SIZE)
+#define MEMORY_FREQDUMP_SIZE			(64)
+
+#define MEMORY_AXI_CCPU_LOG_ADDR		(MEMORY_FREQDUMP_ADDR + MEMORY_FREQDUMP_SIZE)
+#define MEMORY_AXI_CCPU_LOG_SIZE		(4)
+
+#define MEMORY_AXI_MCU_LOG_ADDR			(MEMORY_AXI_CCPU_LOG_ADDR + MEMORY_AXI_CCPU_LOG_SIZE)
+#define MEMORY_AXI_MCU_LOG_SIZE			(4)
+
+#define MEMORY_AXI_SEC_CORE_BOOT_ADDR		(MEMORY_AXI_MCU_LOG_ADDR + MEMORY_AXI_MCU_LOG_SIZE)
+#define MEMORY_AXI_SEC_CORE_BOOT_SIZE		(4)
+
+#define MEMORY_AXI_BBP_PS_VOTE_FLAG_ADDR	(MEMORY_AXI_SEC_CORE_BOOT_ADDR + MEMORY_AXI_SEC_CORE_BOOT_SIZE)
+#define MEMORY_AXI_BBP_PS_VOTE_FLAG_SIZE	(0x4)
+
+#define POLICY_AREA_RESERVED			(MEMORY_AXI_BBP_PS_VOTE_FLAG_ADDR + MEMORY_AXI_BBP_PS_VOTE_FLAG_SIZE)
+#define POLICY_AREA_RESERVED_SIZE		(12)
+
+#define DDR_POLICY_VALID_MAGIC			(POLICY_AREA_RESERVED + POLICY_AREA_RESERVED_SIZE)
+#define DDR_POLICY_VALID_MAGIC_SIZE		(4)
+
+#define DDR_POLICY_MAX_NUM			(DDR_POLICY_VALID_MAGIC + DDR_POLICY_VALID_MAGIC_SIZE)
+#define DDR_POLICY_MAX_NUM_SIZE			(4)
+
+#define DDR_POLICY_SUPPORT_NUM			(DDR_POLICY_MAX_NUM + DDR_POLICY_MAX_NUM_SIZE)
+#define DDR_POLICY_SUPPORT_NUM_SIZE		(4)
+
+#define DDR_POLICY_CUR_POLICY			(DDR_POLICY_SUPPORT_NUM + DDR_POLICY_SUPPORT_NUM_SIZE)
+#define DDR_POLICY_CUR_POLICY_SIZE		(4)
+
+#define ACPU_POLICY_VALID_MAGIC			(DDR_POLICY_CUR_POLICY + DDR_POLICY_CUR_POLICY_SIZE)
+#define ACPU_POLICY_VALID_MAGIC_SIZE		(4)
+
+#define ACPU_POLICY_MAX_NUM			(ACPU_POLICY_VALID_MAGIC + ACPU_POLICY_VALID_MAGIC_SIZE)
+#define ACPU_POLICY_MAX_NUM_SIZE		(4)
+
+#define ACPU_POLICY_SUPPORT_NUM			(ACPU_POLICY_MAX_NUM + ACPU_POLICY_MAX_NUM_SIZE)
+#define ACPU_POLICY_SUPPORT_NUM_SIZE		(4)
+
+#define ACPU_POLICY_CUR_POLICY			(ACPU_POLICY_SUPPORT_NUM + ACPU_POLICY_SUPPORT_NUM_SIZE)
+#define ACPU_POLICY_CUR_POLICY_SIZE		(4)
+
+#define LPDDR_OPTION_ADDR			(ACPU_POLICY_CUR_POLICY + ACPU_POLICY_CUR_POLICY_SIZE)
+#define LPDDR_OPTION_SIZE			(4)
+
+#define MEMORY_AXI_DDR_DDL_ADDR			(LPDDR_OPTION_ADDR + LPDDR_OPTION_SIZE)
+#define MEMORY_AXI_DDR_DDL_SIZE			(0x2BC)
+
+#define DDR_TEST_DFS_ADDR			(MEMORY_AXI_DDR_DDL_ADDR + MEMORY_AXI_DDR_DDL_SIZE)
+#define DDR_TEST_DFS_ADDR_SIZE			(4)
+
+#define DDR_TEST_DFS_TIMES_ADDR			(DDR_TEST_DFS_ADDR + DDR_TEST_DFS_ADDR_SIZE)
+#define DDR_TEST_DFS_TIMES_ADDR_SIZE		(4)
+
+#define DDR_TEST_QOS_ADDR			(DDR_TEST_DFS_TIMES_ADDR + DDR_TEST_DFS_TIMES_ADDR_SIZE)
+#define DDR_TEST_QOS_ADDR_SIZE			(4)
+
+#define DDR_TEST_FUN_ADDR			(DDR_TEST_QOS_ADDR + DDR_TEST_QOS_ADDR_SIZE)
+#define DDR_TEST_FUN_ADDR_SIZE			(4)
+
+#define BOARD_TYPE_ADDR				(DDR_TEST_FUN_ADDR + DDR_TEST_FUN_ADDR_SIZE)
+#define BOARD_ADDR_SIZE				(4)
+#define DDR_DFS_FREQ_ADDR			(BOARD_TYPE_ADDR + BOARD_ADDR_SIZE)
+#define DDR_DFS_FREQ_SIZE			(4)
+
+#define DDR_PASR_ADDR				(DDR_DFS_FREQ_ADDR + DDR_DFS_FREQ_SIZE)
+#define DDR_PASR_SIZE				(20)
+
+#define ACPU_DFS_FREQ_ADDR			(DDR_PASR_ADDR + DDR_PASR_SIZE)
+#define ACPU_DFS_FREQ_ADDR_SIZE			(12)
+
+#define ACPU_CHIP_MAX_FREQ			(ACPU_DFS_FREQ_ADDR + ACPU_DFS_FREQ_ADDR_SIZE)
+#define ACPU_CHIP_MAX_FREQ_SIZE			(4)
+
+#define MEMORY_MEDPLL_STATE_ADDR		(ACPU_CHIP_MAX_FREQ + ACPU_CHIP_MAX_FREQ_SIZE)
+#define MEMORY_MEDPLL_STATE_SIZE		(8)
+
+#define MEMORY_CCPU_LOAD_FLAG_ADDR		(MEMORY_MEDPLL_STATE_ADDR + MEMORY_MEDPLL_STATE_SIZE)
+#define MEMORY_CCPU_LOAD_FLAG_SIZE		(4)
+
+
+#define ACPU_CORE_BITS_ADDR			(MEMORY_CCPU_LOAD_FLAG_ADDR + MEMORY_CCPU_LOAD_FLAG_SIZE)
+#define ACPU_CORE_BITS_SIZE			(4)
+
+#define ACPU_CLUSTER_IDLE_ADDR			(ACPU_CORE_BITS_ADDR + ACPU_CORE_BITS_SIZE)
+#define ACPU_CLUSTER_IDLE_SIZE			(4)
+
+#define ACPU_A53_FLAGS_ADDR			(ACPU_CLUSTER_IDLE_ADDR + ACPU_CLUSTER_IDLE_SIZE)
+#define ACPU_A53_FLAGS_SIZE			(4)
+
+#define ACPU_POWER_STATE_QOS_ADDR		(ACPU_A53_FLAGS_ADDR+ACPU_A53_FLAGS_SIZE)
+#define ACPU_POWER_STATE_QOS_SIZE		(4)
+
+#define ACPU_UNLOCK_CORE_FLAGS_ADDR		(ACPU_POWER_STATE_QOS_ADDR+ACPU_POWER_STATE_QOS_SIZE)
+#define ACPU_UNLOCK_CORE_FLAGS_SIZE		(8)
+
+#define ACPU_SUBSYS_POWERDOWN_FLAGS_ADDR	(ACPU_UNLOCK_CORE_FLAGS_ADDR + ACPU_UNLOCK_CORE_FLAGS_SIZE)
+#define ACPU_SUBSYS_POWERDOWN_FLAGS_SIZE	(4)
+
+#define ACPU_CORE_POWERDOWN_FLAGS_ADDR		(ACPU_SUBSYS_POWERDOWN_FLAGS_ADDR + ACPU_SUBSYS_POWERDOWN_FLAGS_SIZE)
+#define ACPU_CORE_POWERDOWN_FLAGS_SIZE		(4)
+
+#define ACPU_CLUSTER_POWERDOWN_FLAGS_ADDR	(ACPU_CORE_POWERDOWN_FLAGS_ADDR + ACPU_CORE_POWERDOWN_FLAGS_SIZE)
+#define ACPU_CLUSTER_POWERDOWN_FLAGS_SIZE	(4)
+
+#define ACPU_ARM64_FLAGA			(ACPU_CLUSTER_POWERDOWN_FLAGS_ADDR + ACPU_CLUSTER_POWERDOWN_FLAGS_SIZE)
+#define ACPU_ARM64_FLAGA_SIZE			(4)
+
+#define ACPU_ARM64_FLAGB			(ACPU_ARM64_FLAGA + ACPU_ARM64_FLAGA_SIZE)
+#define ACPU_ARM64_FLAGB_SIZE			(4)
+
+#define MCU_EXCEPTION_FLAGS_ADDR		(ACPU_ARM64_FLAGB + ACPU_ARM64_FLAGB_SIZE)
+#define MCU_EXCEPTION_FLAGS_SIZE		(4)
+
+#define ACPU_MASTER_CORE_STATE_ADDR		(MCU_EXCEPTION_FLAGS_ADDR + MCU_EXCEPTION_FLAGS_SIZE)
+#define ACPU_MASTER_CORE_STATE_SIZE		(4)
+
+#define PWRCTRL_AXI_RESERVED_ADDR		(ACPU_MASTER_CORE_STATE_ADDR + ACPU_MASTER_CORE_STATE_SIZE)
+
+#endif /* __HISI_SRAM_MAP_H__ */
diff --git a/plat/hisilicon/hikey/platform.mk b/plat/hisilicon/hikey/platform.mk
index 5aa9b158..9d8f94a7 100644
--- a/plat/hisilicon/hikey/platform.mk
+++ b/plat/hisilicon/hikey/platform.mk
@@ -6,6 +6,7 @@
 
 CONSOLE_BASE			:=	PL011_UART3_BASE
 CRASH_CONSOLE_BASE		:=	PL011_UART3_BASE
+PLAT_PARTITION_MAX_ENTRIES	:=	12
 PLAT_PL061_MAX_GPIOS		:=	160
 COLD_BOOT_SINGLE_CPU		:=	1
 PROGRAMMABLE_RESET_ADDRESS	:=	1
@@ -14,6 +15,8 @@ PROGRAMMABLE_RESET_ADDRESS	:=	1
 $(eval $(call add_define,CONSOLE_BASE))
 $(eval $(call add_define,CRASH_CONSOLE_BASE))
 $(eval $(call add_define,PLAT_PL061_MAX_GPIOS))
+$(eval $(call add_define,PLAT_PARTITION_MAX_ENTRIES))
+$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
 
 ENABLE_PLAT_COMPAT	:=	0
 
@@ -41,3 +44,17 @@ BL1_SOURCES		+=	bl1/tbbr/tbbr_img_desc.c		\
 				plat/hisilicon/hikey/aarch64/hikey_helpers.S \
 				plat/hisilicon/hikey/hikey_bl1_setup.c	\
 				plat/hisilicon/hikey/hikey_io_storage.c
+
+BL2_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c	\
+				drivers/delay_timer/delay_timer.c	\
+				drivers/io/io_block.c			\
+				drivers/io/io_fip.c			\
+				drivers/io/io_storage.c			\
+				drivers/emmc/emmc.c			\
+				drivers/synopsys/emmc/dw_mmc.c		\
+				plat/hisilicon/hikey/aarch64/hikey_helpers.S \
+				plat/hisilicon/hikey/hikey_bl2_setup.c	\
+				plat/hisilicon/hikey/hikey_ddr.c	\
+				plat/hisilicon/hikey/hikey_io_storage.c	\
+				plat/hisilicon/hikey/hisi_dvfs.c	\
+				plat/hisilicon/hikey/hisi_mcu.c