[PowerPC] Improve instruction selection bit-permuting operations (64-bit)

This is the second installment of improvements to instruction selection for "bit
permutation" instruction sequences. r224318 added logic for instruction
selection for 32-bit bit permutation sequences, and this adds lowering for
64-bit sequences. The 64-bit sequences are more complicated than the 32-bit
ones because:
  a) the 64-bit versions of the 32-bit rotate-and-mask instructions
     work by replicating the lower 32-bits of the value-to-be-rotated into the
     upper 32 bits -- and integrating this into the cost modeling for the various
     bit group operations is non-trivial
  b) unlike the 32-bit instructions in 32-bit mode, the rotate-and-mask instructions
     cannot, in one instruction, specify the
     mask starting index, the mask ending index, and the rotation factor. Also,
     forming arbitrary 64-bit constants is more complicated than in 32-bit mode
     because the number of instructions necessary is value dependent.

Plus, support for 'late masking' was added: it is sometimes more efficient to
treat the overall value as if it had no mandatory zero bits when planning the
bit-group insertions, and then mask them in at the very end. Unfortunately, as
the structure of the bit groups is different in the two cases, the more
feasible implementation technique was to generate both instruction sequences,
and then pick the shorter one.

And finally, we now generate reasonable code for i64 bswap:

        rldicl 5, 3, 16, 0
        rldicl 4, 3, 8, 0
        rldicl 6, 3, 24, 0
        rldimi 4, 5, 8, 48
        rldicl 5, 3, 32, 0
        rldimi 4, 6, 16, 40
        rldicl 6, 3, 48, 0
        rldimi 4, 5, 24, 32
        rldicl 5, 3, 56, 0
        rldimi 4, 6, 40, 16
        rldimi 4, 5, 48, 8
        rldimi 4, 3, 56, 0

vs. what we used to produce:

        li 4, 255
        rldicl 5, 3, 24, 40
        rldicl 6, 3, 40, 24
        rldicl 7, 3, 56, 8
        sldi 8, 3, 8
        sldi 10, 3, 24
        sldi 12, 3, 40
        rldicl 0, 3, 8, 56
        sldi 9, 4, 32
        sldi 11, 4, 40
        sldi 4, 4, 48
        andi. 5, 5, 65280
        andis. 6, 6, 255
        andis. 7, 7, 65280
        sldi 3, 3, 56
        and 8, 8, 9
        and 4, 12, 4
        and 9, 10, 11
        or 6, 7, 6
        or 5, 5, 0
        or 3, 3, 4
        or 7, 9, 8
        or 4, 6, 5
        or 3, 3, 7
        or 3, 3, 4

which is 12 instructions, instead of 25, and seems optimal (at least in terms
of code size).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225056 91177308-0d34-0410-b5e6-96231b3b80d8

1 files changed, 239 insertions, 0 deletions

diff --git a/test/CodeGen/PowerPC/bperm.ll b/test/CodeGen/PowerPC/bperm.ll
index 0f920328a05..c489c1f90a8 100644
--- a/test/CodeGen/PowerPC/bperm.ll
+++ b/test/CodeGen/PowerPC/bperm.ll
@@ -16,6 +16,100 @@ entry:
 ; CHECK: blr
 }
 
+define i64 @bs8(i64 %x) #0 {
+entry:
+  %0 = tail call i64 @llvm.bswap.i64(i64 %x)
+  ret i64 %0
+
+; CHECK-LABEL: @bs8
+; CHECK-DAG: rldicl [[REG1:[0-9]+]], 3, 16, 0
+; CHECK-DAG: rldicl [[REG2:[0-9]+]], 3, 8, 0
+; CHECK-DAG: rldicl [[REG3:[0-9]+]], 3, 24, 0
+; CHECK-DAG: rldimi [[REG2]], [[REG1]], 8, 48
+; CHECK-DAG: rldicl [[REG4:[0-9]+]], 3, 32, 0
+; CHECK-DAG: rldimi [[REG2]], [[REG3]], 16, 40
+; CHECK-DAG: rldicl [[REG5:[0-9]+]], 3, 48, 0
+; CHECK-DAG: rldimi [[REG2]], [[REG4]], 24, 32
+; CHECK-DAG: rldicl [[REG6:[0-9]+]], 3, 56, 0
+; CHECK-DAG: rldimi [[REG2]], [[REG5]], 40, 16
+; CHECK-DAG: rldimi [[REG2]], [[REG6]], 48, 8
+; CHECK-DAG: rldimi [[REG2]], 3, 56, 0
+; CHECK: mr 3, [[REG2]]
+; CHECK: blr
+}
+
+define i64 @test1(i64 %i0, i64 %i1) #0 {
+entry:
+  %0 = lshr i64 %i1, 8
+  %and = and i64 %0, 5963776000
+  ret i64 %and
+
+; CHECK-LABEL: @test1
+; CHECK-DAG: li [[REG1:[0-9]+]], 11375
+; CHECK-DAG: rldicl [[REG3:[0-9]+]], 4, 56, 0
+; CHECK-DAG: sldi [[REG2:[0-9]+]], [[REG1]], 19
+; CHECK: and 3, [[REG3]], [[REG2]]
+; CHECK: blr
+}
+
+define i64 @test2(i64 %i0, i64 %i1) #0 {
+entry:
+  %0 = lshr i64 %i1, 6
+  %and = and i64 %0, 133434808670355456
+  ret i64 %and
+
+; CHECK-LABEL: @test2
+; CHECK-DAG: lis [[REG1:[0-9]+]], 474
+; CHECK-DAG: rldicl [[REG5:[0-9]+]], 4, 58, 0
+; CHECK-DAG: ori [[REG2:[0-9]+]], [[REG1]], 3648
+; CHECK-DAG: sldi [[REG3:[0-9]+]], [[REG2]], 32
+; CHECK-DAG: oris [[REG4:[0-9]+]], [[REG3]], 25464
+; CHECK: and 3, [[REG5]], [[REG4]]
+; CHECK: blr
+}
+
+define i64 @test3(i64 %i0, i64 %i1) #0 {
+entry:
+  %0 = shl i64 %i0, 34
+  %and = and i64 %0, 191795733152661504
+  ret i64 %and
+
+; CHECK-LABEL: @test3
+; CHECK-DAG: lis [[REG1:[0-9]+]], 170
+; CHECK-DAG: rldicl [[REG4:[0-9]+]], 3, 34, 0
+; CHECK-DAG: ori [[REG2:[0-9]+]], [[REG1]], 22861
+; CHECK-DAG: sldi [[REG3:[0-9]+]], [[REG2]], 34
+; CHECK: and 3, [[REG4]], [[REG3]]
+; CHECK: blr
+}
+
+define i64 @test4(i64 %i0, i64 %i1) #0 {
+entry:
+  %0 = lshr i64 %i1, 15
+  %and = and i64 %0, 58195968
+  ret i64 %and
+
+; CHECK-LABEL: @test4
+; CHECK: rldicl [[REG1:[0-9]+]], 4, 49, 0
+; CHECK: andis. 3, [[REG1]], 888
+; CHECK: blr
+}
+
+define i64 @test5(i64 %i0, i64 %i1) #0 {
+entry:
+  %0 = shl i64 %i1, 12
+  %and = and i64 %0, 127252959854592
+  ret i64 %and
+
+; CHECK-LABEL: @test5
+; CHECK-DAG: lis [[REG1:[0-9]+]], 3703
+; CHECK-DAG: rldicl [[REG4:[0-9]+]], 4, 12, 0
+; CHECK-DAG: ori [[REG2:[0-9]+]], [[REG1]], 35951
+; CHECK-DAG: sldi [[REG3:[0-9]+]], [[REG2]], 19
+; CHECK: and 3, [[REG4]], [[REG3]]
+; CHECK: blr
+}
+
 ; Function Attrs: nounwind readnone
 define zeroext i32 @test6(i32 zeroext %x) #0 {
 entry:
@@ -33,8 +127,153 @@ entry:
 ; CHECK: blr
 }
 
+define i64 @test7(i64 %i0, i64 %i1) #0 {
+entry:
+  %0 = lshr i64 %i0, 5
+  %and = and i64 %0, 58195968
+  ret i64 %and
+
+; CHECK-LABEL: @test7
+; CHECK: rlwinm [[REG1:[0-9]+]], 3, 27, 9, 12
+; CHECK: rlwimi [[REG1]], 3, 27, 6, 7
+; CHECK: mr 3, [[REG1]]
+; CHECK: blr
+}
+
+define i64 @test8(i64 %i0, i64 %i1) #0 {
+entry:
+  %0 = lshr i64 %i0, 1
+  %and = and i64 %0, 169172533248
+  ret i64 %and
+
+; CHECK-LABEL: @test8
+; CHECK-DAG: lis [[REG1:[0-9]+]], 4
+; CHECK-DAG: rldicl [[REG4:[0-9]+]], 3, 63, 0
+; CHECK-DAG: ori [[REG2:[0-9]+]], [[REG1]], 60527
+; CHECK-DAG: sldi [[REG3:[0-9]+]], [[REG2]], 19
+; CHECK: and 3, [[REG4]], [[REG3]]
+; CHECK: blr
+}
+
+define i64 @test9(i64 %i0, i64 %i1) #0 {
+entry:
+  %0 = lshr i64 %i1, 14
+  %and = and i64 %0, 18848677888
+  %1 = shl i64 %i1, 51
+  %and3 = and i64 %1, 405323966463344640
+  %or4 = or i64 %and, %and3
+  ret i64 %or4
+
+; CHECK-LABEL: @test9
+; CHECK-DAG: lis [[REG1:[0-9]+]], 1440
+; CHECK-DAG: rldicl [[REG5:[0-9]+]], 4, 62, 0
+; CHECK-DAG: rldicl [[REG6:[0-9]+]], 4, 50, 0
+; CHECK-DAG: ori [[REG2:[0-9]+]], [[REG1]], 4
+; CHECK-DAG: rldimi [[REG6]], [[REG5]], 53, 0
+; CHECK-DAG: sldi [[REG3:[0-9]+]], [[REG2]], 32
+; CHECK-DAG: oris [[REG4:[0-9]+]], [[REG3]], 25464
+; CHECK: and 3, [[REG6]], [[REG4]]
+; CHECK: blr
+}
+
+define i64 @test10(i64 %i0, i64 %i1) #0 {
+entry:
+  %0 = shl i64 %i0, 37
+  %and = and i64 %0, 15881483390550016
+  %1 = shl i64 %i0, 25
+  %and3 = and i64 %1, 2473599172608
+  %or4 = or i64 %and, %and3
+  ret i64 %or4
+
+; CHECK-LABEL: @test10
+; CHECK-DAG: lis [[REG1:[0-9]+]], 1
+; CHECK-DAG: rldicl [[REG6:[0-9]+]], 3, 25, 0
+; CHECK-DAG: rldicl [[REG7:[0-9]+]], 3, 37, 0
+; CHECK-DAG: ori [[REG2:[0-9]+]], [[REG1]], 8183
+; CHECK-DAG: ori [[REG3:[0-9]+]], [[REG1]], 50017
+; CHECK-DAG: sldi [[REG4:[0-9]+]], [[REG2]], 25
+; CHECK-DAG: sldi [[REG5:[0-9]+]], [[REG3]], 37
+; CHECK-DAG: and [[REG8:[0-9]+]], [[REG6]], [[REG4]]
+; CHECK-DAG: and [[REG9:[0-9]+]], [[REG7]], [[REG5]]
+; CHECK: or 3, [[REG9]], [[REG8]]
+; CHECK: blr
+}
+
+define i64 @test11(i64 %x) #0 {
+entry:
+  %and = and i64 %x, 4294967295
+  %shl = shl i64 %x, 32
+  %or = or i64 %and, %shl
+  ret i64 %or
+
+; CHECK-LABEL: @test11
+; CHECK: rlwinm 3, 3, 0, 1, 0
+; CHECK: blr
+}
+
+define i64 @test12(i64 %x) #0 {
+entry:
+  %and = and i64 %x, 4294905855
+  %shl = shl i64 %x, 32
+  %or = or i64 %and, %shl
+  ret i64 %or
+
+; CHECK-LABEL: @test12
+; CHECK: rlwinm 3, 3, 0, 20, 15
+; CHECK: blr
+}
+
+define i64 @test13(i64 %x) #0 {
+entry:
+  %shl = shl i64 %x, 4
+  %and = and i64 %shl, 240
+  %shr = lshr i64 %x, 28
+  %and1 = and i64 %shr, 15
+  %or = or i64 %and, %and1
+  ret i64 %or
+
+; CHECK-LABEL: @test13
+; CHECK: rlwinm 3, 3, 4, 24, 31
+; CHECK: blr
+}
+
+define i64 @test14(i64 %x) #0 {
+entry:
+  %shl = shl i64 %x, 4
+  %and = and i64 %shl, 240
+  %shr = lshr i64 %x, 28
+  %and1 = and i64 %shr, 15
+  %and2 = and i64 %x, -4294967296
+  %or = or i64 %and1, %and2
+  %or3 = or i64 %or, %and
+  ret i64 %or3
+
+; CHECK-LABEL: @test14
+; CHECK: rldicr [[REG1:[0-9]+]], 3, 0, 31
+; CHECK: rlwimi [[REG1]], 3, 4, 24, 31
+; CHECK: mr 3, [[REG1]]
+; CHECK: blr
+}
+
+define i64 @test15(i64 %x) #0 {
+entry:
+  %shl = shl i64 %x, 4
+  %and = and i64 %shl, 240
+  %shr = lshr i64 %x, 28
+  %and1 = and i64 %shr, 15
+  %and2 = and i64 %x, -256
+  %or = or i64 %and1, %and2
+  %or3 = or i64 %or, %and
+  ret i64 %or3
+
+; CHECK-LABEL: @test15
+; CHECK: rlwimi 3, 3, 4, 24, 31
+; CHECK: blr
+}
+
 ; Function Attrs: nounwind readnone
 declare i32 @llvm.bswap.i32(i32) #0
+declare i64 @llvm.bswap.i64(i64) #0
 
 attributes #0 = { nounwind readnone }