| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 50670b6ee9bc4ae8f9ce3112b437987adf273245 ]
If md is NULL, tun_dst must be freed, otherwise it will cause memory
leak.
Fixes: 1a66a836da6 ("gre: add collect_md mode to ERSPAN tunnel")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dd8d5b8c5b22e31079b259b8bfb686f1fac1080a ]
When erspan_rcv call return PACKET_REJECT, we shoudn't call ipgre_rcv to
process packets again, instead send icmp unreachable message in error
path.
Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Acked-by: William Tu <u9012063@gmail.com>
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 53c81e95df1793933f87748d36070a721f6cb287 ]
LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over
ip6_vti that require fragmentation and the underlying device has an
MTU smaller than 1500 plus some extra space for headers. This happens
because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating
it depending on a destination address or link parameter. Further
attempts to send UDP packets may succeed because pmtu gets updated on
ICMPV6_PKT_TOOBIG in vti6_err().
In case the lower device has larger MTU size, e.g. 9000, ip6_vti works
but not using the possible maximum size, output packets have 1500 limit.
The above cases require manual MTU setup after ip6_vti creation. However
ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev().
Here is the example when the lower device MTU is set to 9000:
# ip a sh ltp_ns_veth2
ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ...
inet 10.0.0.2/24 scope global ltp_ns_veth2
inet6 fd00::2/64 scope global
# ip li add vti6 type vti6 local fd00::2 remote fd00::1
# ip li show vti6
vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ...
link/tunnel6 fd00::2 peer fd00::1
After the patch:
# ip li add vti6 type vti6 local fd00::2 remote fd00::1
# ip li show vti6
vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ...
link/tunnel6 fd00::2 peer fd00::1
Reported-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b4f70c3d4ec32a2ff4c62e1e2da0da5f55fe12bd ]
This patch enables tail loss probe in cwnd reduction (CWR) state
to detect potential losses. Prior to this patch, since the sender
uses PRR to determine the cwnd in CWR state, the combination of
CWR+PRR plus tcp_tso_should_defer() could cause unnecessary stalls
upon losses: PRR makes cwnd so gentle that tcp_tso_should_defer()
defers sending wait for more ACKs. The ACKs may not come due to
packet losses.
Disallowing TLP when there is unused cwnd had the primary effect
of disallowing TLP when there is TSO deferral, Nagle deferral,
or we hit the rwin limit. Because basically every application
write() or incoming ACK will cause us to run tcp_write_xmit()
to see if we can send more, and then if we sent something we call
tcp_schedule_loss_probe() to see if we should schedule a TLP. At
that point, there are a few common reasons why some cwnd budget
could still be unused:
(a) rwin limit
(b) nagle check
(c) TSO deferral
(d) TSQ
For (d), after the next packet tx completion the TSQ mechanism
will allow us to send more packets, so we don't really need a
TLP (in practice it shouldn't matter whether we schedule one
or not). But for (a), (b), (c) the sender won't send any more
packets until it gets another ACK. But if the whole flight was
lost, or all the ACKs were lost, then we won't get any more ACKs,
and ideally we should schedule and send a TLP to get more feedback.
In particular for a long time we have wanted some kind of timer for
TSO deferral, and at least this would give us some kind of timer
Reported-by: Steve Ibanez <sibanez@stanford.edu>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Nandita Dukkipati <nanditad@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c7976f5272486e4ff406014c4b43e2fa3b70b052 ]
In the ieee80211_setup_sdata() we check if the interface type is valid
and, if not, call BUG(). This should never happen, but if there is
something wrong with the code, it will not be caught until the bug
happens when an interface is being set up. Calling BUG() is too
extreme for this and a WARN_ON() would be better used instead. Change
that.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7bbde83b1860c28a1cc35516352c4e7e5172c29a ]
In qdisc_graft_qdisc a "new" qdisc is attached and the 'qdisc_destroy'
operation is called on the old qdisc. The destroy operation will wait
a rcu grace period and call qdisc_rcu_free(). At which point
gso_cpu_skb is free'd along with all stats so no need to zero stats
and gso_cpu_skb from the graft operation itself.
Further after dropping the qdisc locks we can not continue to call
qdisc_reset before waiting an rcu grace period so that the qdisc is
detached from all cpus. By removing the qdisc_reset() here we get
the correct property of waiting an rcu grace period and letting the
qdisc_destroy operation clean up the qdisc correctly.
Note, a refcnt greater than 1 would cause the destroy operation to
be aborted however if this ever happened the reference to the qdisc
would be lost and we would have a memory leak.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0ba23a211360af7b6658e4fcfc571970bbbacc55 ]
In case of wrap around, replay_esn->oseq_hi is not updated
before it is tested for it's actual value, leading function
to fail with overflow indication and packets being dropped.
This patch updates replay_esn->oseq_hi in the right place.
Fixes: d7dbefc45cf5 ("xfrm: Add xfrm_replay_overflow functions for offloading")
Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit be8f8284cd897af2482d4e54fbc2bdfc15557259 ]
Currently it is possible to add or update socket policies, but
not clear them. Therefore, once a socket policy has been applied,
the socket cannot be used for unencrypted traffic.
This patch allows (privileged) users to clear socket policies by
passing in a NULL pointer and zero length argument to the
{IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both
the incoming and outgoing policies being cleared.
The simple approach taken in this patch cannot clear socket
policies in only one direction. If desired this could be added
in the future, for example by continuing to pass in a length of
zero (which currently is guaranteed to return EMSGSIZE) and
making the policy be a pointer to an integer that contains one
of the XFRM_POLICY_{IN,OUT} enum values.
An alternative would have been to interpret the length as a
signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the
input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output
policy.
Tested: https://android-review.googlesource.com/539816
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d98386d55a5afaa65de77e1e9197edeb8a42079 upstream.
For some reason, Florian forgot to apply to ip6_route_me_harder
the fix that went in commit 29e09229d9f2 ("netfilter: use
skb_to_full_sk in ip_route_me_harder")
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b078556aecd791b0e5cb3a59f4c3a14273b52121 upstream.
l4proto->manip_pkt() can cause reallocation of skb head so pointer
to the ipv6 header must be reloaded.
Reported-and-tested-by: <syzbot+10005f4292fc9cc89de7@syzkaller.appspotmail.com>
Fixes: 58a317f1061c89 ("netfilter: ipv6: add IPv6 NAT support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c4585a2823edf4d1326da44d1524ecbfda26bb37 upstream.
ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.
Therefore it must check that the size of the match structure
provided from userspace is sane by making sure em->match_size
is at least the minimum size of the expected structure.
The module has such a check, but its only done after accessing
a structure that might be out of bounds.
tested with: ebtables -A INPUT ... \
--among-dst fe:fe:fe:fe:fe:fe
--among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe
--among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe
Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b71812168571fa55e44cdd0254471331b9c4c4c6 upstream.
We need to make sure the offsets are not out of range of the
total size.
Also check that they are in ascending order.
The WARN_ON triggered by syzkaller (it sets panic_on_warn) is
changed to also bail out, no point in continuing parsing.
Briefly tested with simple ruleset of
-A INPUT --limit 1/s' --log
plus jump to custom chains using 32bit ebtables binary.
Reported-by: <syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cfc2c740533368b96e2be5e0a4e8c3cace7d9814 upstream.
We had one report from syzkaller [1]
First issue is that INIT_WORK() should be done before mod_timer()
or we risk timer being fired too soon, even with a 1 second timer.
Second issue is that we need to reject too big info->timeout
to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or
risk looping, if result after overflow is 0.
[1]
WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
panic+0x1e4/0x41c kernel/panic.c:183
__warn+0x1dc/0x200 kernel/panic.c:547
report_bug+0x211/0x2d0 lib/bug.c:184
fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178
fixup_bug arch/x86/kernel/traps.c:247 [inline]
do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988
RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444
RSP: 0018:ffff8801db507538 EFLAGS: 00010006
RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404
RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082
RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c
R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6
R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000
queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488
queue_work include/linux/workqueue.h:488 [inline]
schedule_work include/linux/workqueue.h:546 [inline]
idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116
call_timer_fn+0x228/0x820 kernel/time/timer.c:1326
expire_timers kernel/time/timer.c:1363 [inline]
__run_timers+0x7ee/0xb70 kernel/time/timer.c:1666
run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
__do_softirq+0x2d7/0xb85 kernel/softirq.c:285
invoke_softirq kernel/softirq.c:365 [inline]
irq_exit+0x1cc/0x200 kernel/softirq.c:405
exiting_irq arch/x86/include/asm/apic.h:541 [inline]
smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184
RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12
RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006
RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282
RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8
R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278
__debug_object_init+0x235/0x1040 lib/debugobjects.c:378
debug_object_init+0x17/0x20 lib/debugobjects.c:391
__init_work+0x2b/0x60 kernel/workqueue.c:506
idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline]
idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213
xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850
check_target net/ipv6/netfilter/ip6_tables.c:533 [inline]
find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575
translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744
do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline]
do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686
nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115
ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927
udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422
sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976
SYSC_setsockopt net/socket.c:1850 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1829
do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287
Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db57ccf0f2f4624b4c4758379f8165277504fbd7 upstream.
syzbot reported a division by 0 bug in the netfilter nat code:
divide error: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ #309
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88
RSP: 0018:ffff8801b2466778 EFLAGS: 00010246
RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c
RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac
RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900
R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153
R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c
FS: 00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30
get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362
nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406
nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124
redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34
ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41
nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302
nf_nat_ipv6_local_fn+0x33/0x5d0
net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407
ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69
nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
nf_hook include/linux/netfilter.h:243 [inline]
NF_HOOK include/linux/netfilter.h:286 [inline]
ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277
inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142
dccp_connect+0x369/0x670 net/dccp/output.c:564
dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946
__inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620
inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684
SYSC_connect+0x213/0x4a0 net/socket.c:1639
SyS_connect+0x24/0x30 net/socket.c:1620
do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x441c69
RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69
RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590
R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000
Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b
45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48
c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01
RIP: nf_nat_l4proto_unique_tuple+0x291/0x530
net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778
The problem is that currently we don't have any check on the
configured port range. A port range == -1 triggers the bug, while
other negative values may require a very long time to complete the
following loop.
This commit addresses the issue swapping the two ends on negative
ranges. The check is performed in nf_nat_l4proto_unique_tuple() since
the nft nat loads the port values from nft registers at runtime.
v1 -> v2: use the correct 'Fixes' tag
v2 -> v3: update commit message, drop unneeded READ_ONCE()
Fixes: 5b1158e909ec ("[NETFILTER]: Add NAT support for nf_conntrack")
Reported-by: syzbot+8012e198bd037f4871e5@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 10414014bc085aac9f787a5890b33b5605fbcfc4 upstream.
syzbot reported that xt_LED may try to use the ledinternal->timer
without previously initializing it:
------------[ cut here ]------------
kernel BUG at kernel/time/timer.c:958!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ #306
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline]
RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102
RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293
RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6
RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68
RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c
R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000
R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90
FS: 0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75
ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365
ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42
nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483
nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243
NF_HOOK include/linux/netfilter.h:286 [inline]
ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491
ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633
addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008
process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113
worker_thread+0x223/0x1990 kernel/workqueue.c:2247
kthread+0x33c/0x400 kernel/kthread.c:238
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429
Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb
57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3
57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70
RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8
RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8
---[ end trace f661ab06f5dd8b3d ]---
The ledinternal struct can be shared between several different
xt_LED targets, but the related timer is currently initialized only
if the first target requires it. Fix it by unconditionally
initializing the timer struct.
v1 -> v2: call del_timer_sync() unconditionally, too.
Fixes: 268cb38e1802 ("netfilter: x_tables: add LED trigger target")
Reported-by: syzbot+10c98dc5725c6c8fc7fb@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de526f401284e1638d4c97cb5a4c292ac3f37655 upstream.
syszkaller found that rcu was not held in hashlimit_mt_common()
We only need to enable BH at this point.
Fixes: bea74641e378 ("netfilter: xt_hashlimit: add rate match mode")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3e456fce9f51d6276e576d00271e2813c1b8b67 upstream.
There is a race condition between clusterip_config_entry_put()
and clusterip_config_init(), after we release the spinlock in
clusterip_config_entry_put(), a new proc file with a same IP could
be created immediately since it is already removed from the configs
list, therefore it triggers this warning:
------------[ cut here ]------------
proc_dir_entry 'ipt_CLUSTERIP/172.20.0.170' already registered
WARNING: CPU: 1 PID: 4152 at fs/proc/generic.c:330 proc_register+0x2a4/0x370 fs/proc/generic.c:329
Kernel panic - not syncing: panic_on_warn set ...
As a quick fix, just move the proc_remove() inside the spinlock.
Reported-by: <syzbot+03218bcdba6aa76441a3@syzkaller.appspotmail.com>
Fixes: 6c5d5cfbe3c5 ("netfilter: ipt_CLUSTERIP: check duplicate config when initializing")
Tested-by: Paolo Abeni <pabeni@redhat.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 57ebd808a97d7c5b1e1afb937c2db22beba3c1f8 upstream.
The rationale for removing the check is only correct for rulesets
generated by ip(6)tables.
In iptables, a jump can only occur to a user-defined chain, i.e.
because we size the stack based on number of user-defined chains we
cannot exceed stack size.
However, the underlying binary format has no such restriction,
and the validation step only ensures that the jump target is a
valid rule start point.
IOW, its possible to build a rule blob that has no user-defined
chains but does contain a jump.
If this happens, no jump stack gets allocated and crash occurs
because no jumpstack was allocated.
Fixes: 7814b6ec6d0d6 ("netfilter: xtables: don't save/restore jumpstack offset")
Reported-by: syzbot+e783f671527912cd9403@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a5dcb73b96a9d21431048bdaac02d9e96f386da3 upstream.
when sock_create_kern(..., a) returns an error, 'a' might not be a valid
pointer, so it shouldn't be dereferenced to read a->sk->sk_sndbuf and
and a->sk->sk_rcvbuf; not doing that caused the following crash:
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4254 Comm: syzkaller919713 Not tainted 4.16.0-rc1+ #18
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:smc_create+0x14e/0x300 net/smc/af_smc.c:1410
RSP: 0018:ffff8801b06afbc8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8801b63457c0 RCX: ffffffff85a3e746
RDX: 0000000000000004 RSI: 00000000ffffffff RDI: 0000000000000020
RBP: ffff8801b06afbf0 R08: 00000000000007c0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8801b6345c08 R14: 00000000ffffffe9 R15: ffffffff8695ced0
FS: 0000000001afb880(0000) GS:ffff8801db200000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000040 CR3: 00000001b0721004 CR4: 00000000001606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__sock_create+0x4d4/0x850 net/socket.c:1285
sock_create net/socket.c:1325 [inline]
SYSC_socketpair net/socket.c:1409 [inline]
SyS_socketpair+0x1c0/0x6f0 net/socket.c:1366
do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x4404b9
RSP: 002b:00007fff44ab6908 EFLAGS: 00000246 ORIG_RAX: 0000000000000035
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004404b9
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000000002b
RBP: 00007fff44ab6910 R08: 0000000000000002 R09: 00007fff44003031
R10: 0000000020000040 R11: 0000000000000246 R12: ffffffffffffffff
R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000
Code: 48 c1 ea 03 80 3c 02 00 0f 85 b3 01 00 00 4c 8b a3 48 04 00 00 48
b8
00 00 00 00 00 fc ff df 49 8d 7c 24 20 48 89 fa 48 c1 ea 03 <80> 3c 02
00
0f 85 82 01 00 00 4d 8b 7c 24 20 48 b8 00 00 00 00
RIP: smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: ffff8801b06afbc8
Fixes: cd6851f30386 smc: remote memory buffers (RMBs)
Reported-and-tested-by: syzbot+aa0227369be2dcc26ebe@syzkaller.appspotmail.com
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fc68e171d376c322e6777a3d7ac2f0278b68b17f ]
This reverts commit 89fe18e44f7ee5ab1c90d0dff5835acee7751427.
While the patch could detect more spurious timeouts, it could cause
poor TCP performance on broken middle-boxes that modifies TCP packets
(e.g. receive window, SACK options). Since the performance gain is
much smaller compared to the potential loss. The best solution is
to fully revert the change.
Fixes: 89fe18e44f7e ("tcp: extend F-RTO to catch more spurious timeouts")
Reported-by: Teodor Milkov <tm@del.bg>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d4131f09770d9b7471c9da65e6ecd2477746ac5c ]
This reverts commit cc663f4d4c97b7297fb45135ab23cfd508b35a77. While fixing
some broken middle-boxes that modifies receive window fields, it does not
address middle-boxes that strip off SACK options. The best solution is
to fully revert this patch and the root F-RTO enhancement.
Fixes: cc663f4d4c97 ("tcp: restrict F-RTO to work-around broken middle-boxes")
Reported-by: Teodor Milkov <tm@del.bg>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 28f5bfb819195ad9c2eb9486babe7b0e4efe925f ]
l2tp_tunnel_get walks the tunnel list to find a matching tunnel
instance and if a match is found, its refcount is increased before
returning the tunnel pointer. But when tunnel objects are destroyed,
they are on the tunnel list after their refcount hits zero. Fix this
by moving the code that removes the tunnel from the tunnel list from
the tunnel socket destructor into in the l2tp_tunnel_delete path,
before the tunnel refcount is decremented.
refcount_t: increment on 0; use-after-free.
WARNING: CPU: 3 PID: 13507 at lib/refcount.c:153 refcount_inc+0x47/0x50
Modules linked in:
CPU: 3 PID: 13507 Comm: syzbot_6e6a5ec8 Not tainted 4.16.0-rc2+ #36
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:refcount_inc+0x47/0x50
RSP: 0018:ffff8800136ffb20 EFLAGS: 00010286
RAX: dffffc0000000008 RBX: ffff880017068e68 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: ffff88001a59f6d8 RDI: ffff88001a59f6d8
RBP: ffff8800136ffb28 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8800136ffab0 R11: 0000000000000000 R12: ffff880017068e50
R13: 0000000000000000 R14: ffff8800174da800 R15: 0000000000000004
FS: 00007f403ab1e700(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205fafd2 CR3: 0000000016770000 CR4: 00000000000006e0
Call Trace:
l2tp_tunnel_get+0x2dd/0x4e0
pppol2tp_connect+0x428/0x13c0
? pppol2tp_session_create+0x170/0x170
? __might_fault+0x115/0x1d0
? lock_downgrade+0x860/0x860
? __might_fault+0xe5/0x1d0
? security_socket_connect+0x8e/0xc0
SYSC_connect+0x1b6/0x310
? SYSC_bind+0x280/0x280
? __do_page_fault+0x5d1/0xca0
? up_read+0x1f/0x40
? __do_page_fault+0x3c8/0xca0
SyS_connect+0x29/0x30
? SyS_accept+0x40/0x40
do_syscall_64+0x1e0/0x730
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f403a42f259
RSP: 002b:00007f403ab1dee8 EFLAGS: 00000296 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00000000205fafe4 RCX: 00007f403a42f259
RDX: 000000000000002e RSI: 00000000205fafd2 RDI: 0000000000000004
RBP: 00007f403ab1df20 R08: 00007f403ab1e700 R09: 0000000000000000
R10: 00007f403ab1e700 R11: 0000000000000296 R12: 0000000000000000
R13: 00007ffc81906cbf R14: 0000000000000000 R15: 00007f403ab2b040
Code: 3b ff 5b 5d c3 e8 ca 5f 3b ff 80 3d 49 8e 66 04 00 75 ea e8 bc 5f 3b ff 48 c7 c7 60 69 64 85 c6 05 34 8e 66 04 01 e8 59 49 15 ff <0f> 0b eb ce 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49
Fixes: f8ccac0e44934 ("l2tp: put tunnel socket release on a workqueue")
Reported-and-tested-by: syzbot+19c09769f14b48810113@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+347bd5acde002e353a36@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+6e6a5ec8de31a94cd015@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+9df43faf09bd400f2993@syzkaller.appspotmail.com
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d02ba2a6110c530a32926af8ad441111774d2893 ]
pppol2tp_release uses call_rcu to put the final ref on its socket. But
the session object doesn't hold a ref on the session socket so may be
freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by
having the session hold a ref on its socket until the session is
destroyed. It is this ref that is dropped via call_rcu.
Sessions are also deleted via l2tp_tunnel_closeall. This must now also put
the final ref via call_rcu. So move the call_rcu call site into
pppol2tp_session_close so that this happens in both destroy paths. A
common destroy path should really be implemented, perhaps with
l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release
does, but this will be looked at later.
ODEBUG: activate active (active state 1) object type: rcu_head hint: (null)
WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220
Modules linked in:
CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:debug_print_object+0x166/0x220
RSP: 0018:ffff880013647a00 EFLAGS: 00010082
RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0
RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001
R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001
R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0
Call Trace:
debug_object_activate+0x38b/0x530
? debug_object_assert_init+0x3b0/0x3b0
? __mutex_unlock_slowpath+0x85/0x8b0
? pppol2tp_session_destruct+0x110/0x110
__call_rcu.constprop.66+0x39/0x890
? __call_rcu.constprop.66+0x39/0x890
call_rcu_sched+0x17/0x20
pppol2tp_release+0x2c7/0x440
? fcntl_setlk+0xca0/0xca0
? sock_alloc_file+0x340/0x340
sock_release+0x92/0x1e0
sock_close+0x1b/0x20
__fput+0x296/0x6e0
____fput+0x1a/0x20
task_work_run+0x127/0x1a0
do_exit+0x7f9/0x2ce0
? SYSC_connect+0x212/0x310
? mm_update_next_owner+0x690/0x690
? up_read+0x1f/0x40
? __do_page_fault+0x3c8/0xca0
do_group_exit+0x10d/0x330
? do_group_exit+0x330/0x330
SyS_exit_group+0x22/0x30
do_syscall_64+0x1e0/0x730
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f362e471259
RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259
RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000
RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000
Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e
8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41
Fixes: ee40fb2e1eb5b ("l2tp: protect sock pointer of struct pppol2tp_session with RCU")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d00fa9adc528c1b0e64d532556764852df8bd7b9 ]
The tunnel socket tunnel->sock (struct sock) is accessed when
preparing a new ppp session on a tunnel at pppol2tp_session_init. If
the socket is closed by a thread while another is creating a new
session, the threads race. In pppol2tp_connect, the tunnel object may
be created if the pppol2tp socket is associated with the special
session_id 0 and the tunnel socket is looked up using the provided
fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel
socket to prevent it being destroyed during pppol2tp_connect since
this may itself may race with the socket being destroyed. Doing
sockfd_lookup in pppol2tp_connect isn't sufficient to prevent
tunnel->sock going away either because a given tunnel socket fd may be
reused between calls to pppol2tp_connect. Instead, have
l2tp_tunnel_create sock_hold the tunnel socket before it does
sockfd_put. This ensures that the tunnel's socket is always extant
while the tunnel object exists. Hold a ref on the socket until the
tunnel is destroyed and ensure that all tunnel destroy paths go
through a common function (l2tp_tunnel_delete) since this will do the
final sock_put to release the tunnel socket.
Since the tunnel's socket is now guaranteed to exist if the tunnel
exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel
to derive the tunnel from the socket since this is always
sk_user_data.
Also, sessions no longer sock_hold the tunnel socket since sessions
already hold a tunnel ref and the tunnel sock will not be freed until
the tunnel is freed. Removing these sock_holds in
l2tp_session_register avoids a possible sock leak in the
pppol2tp_connect error path if l2tp_session_register succeeds but
attaching a ppp channel fails. The pppol2tp_connect error path could
have been fixed instead and have the sock ref dropped when the session
is freed, but doing a sock_put of the tunnel socket when the session
is freed would require a new session_free callback. It is simpler to
just remove the sock_hold of the tunnel socket in
l2tp_session_register, now that the tunnel socket lifetime is
guaranteed.
Finally, some init code in l2tp_tunnel_create is reordered to ensure
that the new tunnel object's refcount is set and the tunnel socket ref
is taken before the tunnel socket destructor callbacks are set.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:pppol2tp_session_init+0x1d6/0x500
RSP: 0018:ffff88001377fb40 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d
RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228
RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002
R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000
R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76
FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0
Call Trace:
pppol2tp_connect+0xd18/0x13c0
? pppol2tp_session_create+0x170/0x170
? __might_fault+0x115/0x1d0
? lock_downgrade+0x860/0x860
? __might_fault+0xe5/0x1d0
? security_socket_connect+0x8e/0xc0
SYSC_connect+0x1b6/0x310
? SYSC_bind+0x280/0x280
? __do_page_fault+0x5d1/0xca0
? up_read+0x1f/0x40
? __do_page_fault+0x3c8/0xca0
SyS_connect+0x29/0x30
? SyS_accept+0x40/0x40
do_syscall_64+0x1e0/0x730
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7ffb3e376259
RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259
RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004
RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000
Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f
a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16
Fixes: 80d84ef3ff1dd ("l2tp: prevent l2tp_tunnel_delete racing with userspace close")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 225eb26489d05c679a4c4197ffcb81c81e9dcaf4 ]
Previously, if a ppp session was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our session will be detached anyway).
BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0
Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296
CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
dump_stack+0x101/0x157
? inet_shutdown+0x5d/0x1c0
print_address_description+0x78/0x260
? inet_shutdown+0x5d/0x1c0
kasan_report+0x240/0x360
__asan_load4+0x78/0x80
inet_shutdown+0x5d/0x1c0
? pppol2tp_show+0x80/0x80
pppol2tp_session_close+0x68/0xb0
l2tp_tunnel_closeall+0x199/0x210
? udp_v6_flush_pending_frames+0x90/0x90
l2tp_udp_encap_destroy+0x6b/0xc0
? l2tp_tunnel_del_work+0x2e0/0x2e0
udpv6_destroy_sock+0x8c/0x90
sk_common_release+0x47/0x190
udp_lib_close+0x15/0x20
inet_release+0x85/0xd0
inet6_release+0x43/0x60
sock_release+0x53/0x100
? sock_alloc_file+0x260/0x260
sock_close+0x1b/0x20
__fput+0x19f/0x380
____fput+0x1a/0x20
task_work_run+0xd2/0x110
exit_to_usermode_loop+0x18d/0x190
do_syscall_64+0x389/0x3b0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x7fe240a45259
RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259
RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5
RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000
R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000
R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040
Allocated by task 8331:
save_stack+0x43/0xd0
kasan_kmalloc+0xad/0xe0
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0x144/0x3e0
sock_alloc_inode+0x22/0x130
alloc_inode+0x3d/0xf0
new_inode_pseudo+0x1c/0x90
sock_alloc+0x30/0x110
__sock_create+0xaa/0x4c0
SyS_socket+0xbe/0x130
do_syscall_64+0x128/0x3b0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
Freed by task 8314:
save_stack+0x43/0xd0
__kasan_slab_free+0x11a/0x170
kasan_slab_free+0xe/0x10
kmem_cache_free+0x88/0x2b0
sock_destroy_inode+0x49/0x50
destroy_inode+0x77/0xb0
evict+0x285/0x340
iput+0x429/0x530
dentry_unlink_inode+0x28c/0x2c0
__dentry_kill+0x1e3/0x2f0
dput.part.21+0x500/0x560
dput+0x24/0x30
__fput+0x2aa/0x380
____fput+0x1a/0x20
task_work_run+0xd2/0x110
exit_to_usermode_loop+0x18d/0x190
do_syscall_64+0x389/0x3b0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
Fixes: fd558d186df2c ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 76a6abdb2513ad4ea0ded55d2c66160491f2e848 ]
Previously, if a tunnel was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our tunnel will be detached anyway).
BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
IP: __lock_acquire+0x263/0x1630
PGD 0 P4D 0
Oops: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129
Workqueue: l2tp l2tp_tunnel_del_work
RIP: 0010:__lock_acquire+0x263/0x1630
RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002
RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0
R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0
Call Trace:
? __lock_acquire+0xc77/0x1630
? console_trylock+0x11/0xa0
lock_acquire+0x117/0x230
? lock_sock_nested+0x3a/0xa0
_raw_spin_lock_bh+0x3a/0x50
? lock_sock_nested+0x3a/0xa0
lock_sock_nested+0x3a/0xa0
inet_shutdown+0x33/0xf0
l2tp_tunnel_del_work+0x60/0xef
process_one_work+0x1ea/0x5f0
? process_one_work+0x162/0x5f0
worker_thread+0x48/0x3e0
? trace_hardirqs_on+0xd/0x10
kthread+0x108/0x140
? process_one_work+0x5f0/0x5f0
? kthread_stop+0x2a0/0x2a0
ret_from_fork+0x24/0x30
Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85
68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c
24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f
RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70
CR2: 00000000000000a0
Fixes: 309795f4bec2d ("l2tp: Add netlink control API for L2TP")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5c487bb9adddbc1d23433e09d2548759375c2b52 ]
tracepoint tcp_send_reset requires a full socket to work. However, it
may be called when in TCP_TIME_WAIT:
case TCP_TW_RST:
tcp_v6_send_reset(sk, skb);
inet_twsk_deschedule_put(inet_twsk(sk));
goto discard_it;
To avoid this problem, this patch checks the socket with sk_fullsock()
before calling trace_tcp_send_reset().
Fixes: c24b14c46bb8 ("tcp: add tracepoint trace_tcp_send_reset")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a27fd7a8ed3856faaf5a2ff1c8c5f00c0667aaa0 ]
When the connection is reset, there is no point in
keeping the packets on the write queue until the connection
is closed.
RFC 793 (page 70) and RFC 793-bis (page 64) both suggest
purging the write queue upon RST:
https://tools.ietf.org/html/draft-ietf-tcpm-rfc793bis-07
Moreover, this is essential for a correct MSG_ZEROCOPY
implementation, because userspace cannot call close(fd)
before receiving zerocopy signals even when the connection
is reset.
Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b87b6194be631c94785fe93398651e804ed43e28 ]
Before, if cb->start() failed, the module reference would never be put,
because cb->cb_running is intentionally false at this point. Users are
generally annoyed by this because they can no longer unload modules that
leak references. Also, it may be possible to tediously wrap a reference
counter back to zero, especially since module.c still uses atomic_inc
instead of refcount_inc.
This patch expands the error path to simply call module_put if
cb->start() fails.
Fixes: 41c87425a1ac ("netlink: do not set cb_running if dump's start() errs")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d7cdee5ea8d28ae1b6922deb0c1badaa3aa0ef8c ]
Li Shuang reported an Oops with cls_u32 due to an use-after-free
in u32_destroy_key(). The use-after-free can be triggered with:
dev=lo
tc qdisc add dev $dev root handle 1: htb default 10
tc filter add dev $dev parent 1: prio 5 handle 1: protocol ip u32 divisor 256
tc filter add dev $dev protocol ip parent 1: prio 5 u32 ht 800:: match ip dst\
10.0.0.0/8 hashkey mask 0x0000ff00 at 16 link 1:
tc qdisc del dev $dev root
Which causes the following kasan splat:
==================================================================
BUG: KASAN: use-after-free in u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
Read of size 4 at addr ffff881b83dae618 by task kworker/u48:5/571
CPU: 17 PID: 571 Comm: kworker/u48:5 Not tainted 4.15.0+ #87
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
Workqueue: tc_filter_workqueue u32_delete_key_freepf_work [cls_u32]
Call Trace:
dump_stack+0xd6/0x182
? dma_virt_map_sg+0x22e/0x22e
print_address_description+0x73/0x290
kasan_report+0x277/0x360
? u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
u32_delete_key_freepf_work+0x1c/0x30 [cls_u32]
process_one_work+0xae0/0x1c80
? sched_clock+0x5/0x10
? pwq_dec_nr_in_flight+0x3c0/0x3c0
? _raw_spin_unlock_irq+0x29/0x40
? trace_hardirqs_on_caller+0x381/0x570
? _raw_spin_unlock_irq+0x29/0x40
? finish_task_switch+0x1e5/0x760
? finish_task_switch+0x208/0x760
? preempt_notifier_dec+0x20/0x20
? __schedule+0x839/0x1ee0
? check_noncircular+0x20/0x20
? firmware_map_remove+0x73/0x73
? find_held_lock+0x39/0x1c0
? worker_thread+0x434/0x1820
? lock_contended+0xee0/0xee0
? lock_release+0x1100/0x1100
? init_rescuer.part.16+0x150/0x150
? retint_kernel+0x10/0x10
worker_thread+0x216/0x1820
? process_one_work+0x1c80/0x1c80
? lock_acquire+0x1a5/0x540
? lock_downgrade+0x6b0/0x6b0
? sched_clock+0x5/0x10
? lock_release+0x1100/0x1100
? compat_start_thread+0x80/0x80
? do_raw_spin_trylock+0x190/0x190
? _raw_spin_unlock_irq+0x29/0x40
? trace_hardirqs_on_caller+0x381/0x570
? _raw_spin_unlock_irq+0x29/0x40
? finish_task_switch+0x1e5/0x760
? finish_task_switch+0x208/0x760
? preempt_notifier_dec+0x20/0x20
? __schedule+0x839/0x1ee0
? kmem_cache_alloc_trace+0x143/0x320
? firmware_map_remove+0x73/0x73
? sched_clock+0x5/0x10
? sched_clock_cpu+0x18/0x170
? find_held_lock+0x39/0x1c0
? schedule+0xf3/0x3b0
? lock_downgrade+0x6b0/0x6b0
? __schedule+0x1ee0/0x1ee0
? do_wait_intr_irq+0x340/0x340
? do_raw_spin_trylock+0x190/0x190
? _raw_spin_unlock_irqrestore+0x32/0x60
? process_one_work+0x1c80/0x1c80
? process_one_work+0x1c80/0x1c80
kthread+0x312/0x3d0
? kthread_create_worker_on_cpu+0xc0/0xc0
ret_from_fork+0x3a/0x50
Allocated by task 1688:
kasan_kmalloc+0xa0/0xd0
__kmalloc+0x162/0x380
u32_change+0x1220/0x3c9e [cls_u32]
tc_ctl_tfilter+0x1ba6/0x2f80
rtnetlink_rcv_msg+0x4f0/0x9d0
netlink_rcv_skb+0x124/0x320
netlink_unicast+0x430/0x600
netlink_sendmsg+0x8fa/0xd60
sock_sendmsg+0xb1/0xe0
___sys_sendmsg+0x678/0x980
__sys_sendmsg+0xc4/0x210
do_syscall_64+0x232/0x7f0
return_from_SYSCALL_64+0x0/0x75
Freed by task 112:
kasan_slab_free+0x71/0xc0
kfree+0x114/0x320
rcu_process_callbacks+0xc3f/0x1600
__do_softirq+0x2bf/0xc06
The buggy address belongs to the object at ffff881b83dae600
which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 24 bytes inside of
4096-byte region [ffff881b83dae600, ffff881b83daf600)
The buggy address belongs to the page:
page:ffffea006e0f6a00 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x17ffffc0008100(slab|head)
raw: 0017ffffc0008100 0000000000000000 0000000000000000 0000000100070007
raw: dead000000000100 dead000000000200 ffff880187c0e600 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff881b83dae500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff881b83dae580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff881b83dae600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff881b83dae680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff881b83dae700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
The problem is that the htnode is freed before the linked knodes and the
latter will try to access the first at u32_destroy_key() time.
This change addresses the issue using the htnode refcnt to guarantee
the correct free order. While at it also add a RCU annotation,
to keep sparse happy.
v1 -> v2: use rtnl_derefence() instead of RCU read locks
v2 -> v3:
- don't check refcnt in u32_destroy_hnode()
- cleaned-up u32_destroy() implementation
- cleaned-up code comment
v3 -> v4:
- dropped unneeded comment
Reported-by: Li Shuang <shuali@redhat.com>
Fixes: c0d378ef1266 ("net_sched: use tcf_queue_work() in u32 filter")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c113187d38ff85dc302a1bb55864b203ebb2ba10 ]
The tls ulp overrides sk->prot with a new tls specific proto structs.
The tls specific structs were previously based on the ipv4 specific
tcp_prot sturct.
As a result, attaching the tls ulp to an ipv6 tcp socket replaced
some ipv6 callback with the ipv4 equivalents.
This patch adds ipv6 tls proto structs and uses them when
attached to ipv6 sockets.
Fixes: 3c4d7559159b ('tls: kernel TLS support')
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0e5a82efda872c2469c210957d7d4161ef8f4391 ]
When a VLAN is added on a port, a reference is taken on the
corresponding master VLAN entry. If it does not already exist, then it
is created and a reference taken.
However, in the second case a reference is not really taken when
CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by
refcount_inc_not_zero().
Fix this by using refcount_set() on a newly created master VLAN entry.
Fixes: 251277598596 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ]
When going through the bind address list in sctp_v6_get_dst() and
the previously found address is better ('matchlen > bmatchlen'),
the code continues to the next iteration without releasing currently
held destination.
Fix it by releasing 'bdst' before continue to the next iteration, and
instead of introducing one more '!IS_ERR(bdst)' check for dst_release(),
move the already existed one right after ip6_dst_lookup_flow(), i.e. we
shouldn't proceed further if we get an error for the route lookup.
Fixes: dbc2b5e9a09e ("sctp: fix src address selection if using secondary addresses for ipv6")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1fe4b1184c2ae2bfbf9e8b14c9c0c1945c98f205 ]
The result of the skb flow dissect is copied from keys to hash_keys to
ensure only the intended data is hashed. The original L4 hash patch
overlooked setting the addr_type for this case; add it.
Fixes: bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 27af86bb038d9c8b8066cd17854ddaf2ea92bce1 ]
The pr_err in sctp_hash_transport was supposed to report a sctp bug
for using rhashtable/rhlist.
The err '-EEXIST' introduced in Commit cd2b70875058 ("sctp: check
duplicate node before inserting a new transport") doesn't belong
to that case.
So just return -EEXIST back without pr_err any kmsg.
Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport")
Reported-by: Wei Chen <weichen@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eb53f7af6f15285e2f6ada97285395343ce9f433 ]
The following sequence is currently broken:
# tc qdisc add dev foo ingress
# tc filter replace dev foo protocol all ingress \
u32 match u8 0 0 action mirred egress mirror dev bar1
# tc filter replace dev foo protocol all ingress \
handle 800::800 pref 49152 \
u32 match u8 0 0 action mirred egress mirror dev bar2
Error: cls_u32: Key node flags do not match passed flags.
We have an error talking to the kernel, -1
The error comes from u32_change() when comparing new and
existing flags. The existing ones always contains one of
TCA_CLS_FLAGS_{,NOT}_IN_HW flag depending on offloading state.
These flags cannot be passed from userspace so the condition
(n->flags != flags) in u32_change() always fails.
Fix the condition so the flags TCA_CLS_FLAGS_NOT_IN_HW and
TCA_CLS_FLAGS_IN_HW are not taken into account.
Fixes: 24d3dc6d27ea ("net/sched: cls_u32: Reflect HW offload status")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a5f7add332b4ea6d4b9480971b3b0f5e66466ae9 ]
pfifo_fast got percpu stats lately, uncovering a bug I introduced last
year in linux-4.10.
I missed the fact that we have to clear our temporary storage
before calling __gnet_stats_copy_basic() in the case of percpu stats.
Without this fix, rate estimators (tc qd replace dev xxx root est 1sec
4sec pfifo_fast) are utterly broken.
Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 350c9f484bde93ef229682eedd98cd5f74350f7f ]
BBR uses tcp_tso_autosize() in an attempt to probe what would be the
burst sizes and to adjust cwnd in bbr_target_cwnd() with following
gold formula :
/* Allow enough full-sized skbs in flight to utilize end systems. */
cwnd += 3 * bbr->tso_segs_goal;
But GSO can be lacking or be constrained to very small
units (ip link set dev ... gso_max_segs 2)
What we really want is to have enough packets in flight so that both
GSO and GRO are efficient.
So in the case GSO is off or downgraded, we still want to have the same
number of packets in flight as if GSO/TSO was fully operational, so
that GRO can hopefully be working efficiently.
To fix this issue, we make tcp_tso_autosize() unaware of
sk->sk_gso_max_segs
Only tcp_tso_segs() has to enforce the gso_max_segs limit.
Tested:
ethtool -K eth0 tso off gso off
tc qd replace dev eth0 root pfifo_fast
Before patch:
for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
691 (ss -temoi shows cwnd is stuck around 6 )
667
651
631
517
After patch :
# for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
1733 (ss -temoi shows cwnd is around 386 )
1778
1746
1781
1718
Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 93c62c45ed5fad1b87e3a45835b251cd68de9c46 ]
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send
both parts of the iov[] buffer, but one of them does not. Fix it so that
it does.
Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc
header included, but no payload.
Fixes: 5a924b8951f8 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 808cf9e38cd7923036a99f459ccc8cf2955e47af ]
Avoid SKB coalescing if eor bit is set in one of the relevant
SKBs.
Fixes: c134ecb87817 ("tcp: Make use of MSG_EOR in tcp_sendmsg")
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4a31a6b19f9ddf498c81f5c9b089742b7472a6f8 ]
Fix dst reference count leak in sctp_v4_get_dst() introduced in commit
410f03831 ("sctp: add routing output fallback"):
When walking the address_list, successive ip_route_output_key() calls
may return the same rt->dst with the reference incremented on each call.
The code would not decrement the dst refcount when the dst pointer was
identical from the previous iteration, causing the dst refcnt leak.
Testcase:
ip netns add TEST
ip netns exec TEST ip link set lo up
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link set dev dummy0 netns TEST
ip link set dev dummy1 netns TEST
ip link set dev dummy2 netns TEST
ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0
ip netns exec TEST ip link set dummy0 up
ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1
ip netns exec TEST ip link set dummy1 up
ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2
ip netns exec TEST ip link set dummy2 up
ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3
ip netns del TEST
In 4.4 and 4.9 kernels this results to:
[ 354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1
...
Fixes: 410f03831 ("sctp: add routing output fallback")
Fixes: 0ca50d12f ("sctp: fix src address selection if using secondary addresses")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ]
Since UDP-Lite is always using checksum, the following path is
triggered when calculating pseudo header for it:
udp4_csum_init() or udp6_csum_init()
skb_checksum_init_zero_check()
__skb_checksum_validate_complete()
The problem can appear if skb->len is less than CHECKSUM_BREAK. In
this particular case __skb_checksum_validate_complete() also invokes
__skb_checksum_complete(skb). If UDP-Lite is using partial checksum
that covers only part of a packet, the function will return bad
checksum and the packet will be dropped.
It can be fixed if we skip skb_checksum_init_zero_check() and only
set the required pseudo header checksum for UDP-Lite with partial
checksum before udp4_csum_init()/udp6_csum_init() functions return.
Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4")
Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c ]
When SCTP makes INIT or INIT_ACK packet the total chunk length
can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when
transmitting these packets, e.g. the crash on sending INIT_ACK:
[ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168
put:120156 head:000000007aa47635 data:00000000d991c2de
tail:0x1d640 end:0xfec0 dev:<NULL>
...
[ 597.976970] ------------[ cut here ]------------
[ 598.033408] kernel BUG at net/core/skbuff.c:104!
[ 600.314841] Call Trace:
[ 600.345829] <IRQ>
[ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp]
[ 600.436934] skb_put+0x16c/0x200
[ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp]
[ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp]
[ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp]
[ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp]
[ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp]
[ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp]
[ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp]
[ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp]
[ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp]
[ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp]
[ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp]
[ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp]
[ 601.233575] sctp_do_sm+0x182/0x560 [sctp]
[ 601.284328] ? sctp_has_association+0x70/0x70 [sctp]
[ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp]
[ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp]
...
Here the chunk size for INIT_ACK packet becomes too big, mostly
because of the state cookie (INIT packet has large size with
many address parameters), plus additional server parameters.
Later this chunk causes the panic in skb_put_data():
skb_packet_transmit()
sctp_packet_pack()
skb_put_data(nskb, chunk->skb->data, chunk->skb->len);
'nskb' (head skb) was previously allocated with packet->size
from u16 'chunk->chunk_hdr->length'.
As suggested by Marcelo we should check the chunk's length in
_sctp_make_chunk() before trying to allocate skb for it and
discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN.
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leinter@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5ae437ad5a2ed573b1ebb04e0afa70b8869f88dd ]
So far, if the filter was too large to fit in the allocated skb, the
kernel did not return any error and stopped dumping. Modify the dumper
so that it returns -EMSGSIZE when a filter fails to dump and it is the
first filter in the skb. If we are not first, we will get a next chance
with more room.
I understand this is pretty near to being an API change, but the
original design (silent truncation) can be considered a bug.
Note: The error case can happen pretty easily if you create a filter
with 32 actions and have 4kb pages. Also recent versions of iproute try
to be clever with their buffer allocation size, which in turn leads to
Signed-off-by: Roman Kapl <code@rkapl.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cb9f7a9a5c96a773bbc9c70660dc600cfff82f82 ]
Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the
case when commit 134e63756d5f was pushed.
However, there was no reason to stop the loop if a netns does not have
listeners.
Returns -ESRCH only if there was no listeners in all netns.
To avoid having the same problem in the future, I didn't take the
assumption that nlmsg_multicast() returns only 0 or -ESRCH.
Fixes: 134e63756d5f ("genetlink: make netns aware")
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c7272c2f1229125f74f22dcdd59de9bbd804f1c8 ]
According to RFC 1191 sections 3 and 4, ICMP frag-needed messages
indicating an MTU below 68 should be rejected:
A host MUST never reduce its estimate of the Path MTU below 68
octets.
and (talking about ICMP frag-needed's Next-Hop MTU field):
This field will never contain a value less than 68, since every
router "must be able to forward a datagram of 68 octets without
fragmentation".
Furthermore, by letting net.ipv4.route.min_pmtu be set to negative
values, we can end up with a very large PMTU when (-1) is cast into u32.
Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to
unsigned ints.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ac5b70198adc25c73fba28de4f78adcee8f6be0b ]
netif_set_real_num_tx_queues() can be called when netdev is up.
That usually happens when user requests change of number of
channels/rings with ethtool -L. The procedure for changing
the number of queues involves resetting the qdiscs and setting
dev->num_tx_queues to the new value. When the new value is
lower than the old one, extra care has to be taken to ensure
ordering of accesses to the number of queues vs qdisc reset.
Currently the queues are reset before new dev->num_tx_queues
is assigned, leaving a window of time where packets can be
enqueued onto the queues going down, leading to a likely
crash in the drivers, since most drivers don't check if TX
skbs are assigned to an active queue.
Fixes: e6484930d7c7 ("net: allocate tx queues in register_netdevice")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ca79bec237f5809a7c3c59bd41cd0880aa889966 ]
gcc-8 has a new warning that detects overlapping input and output arguments
in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(),
which is actually correct:
net/ipv6/sit.c: In function 'sit_init_net':
net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
The problem here is that the logic detecting the memcpy() arguments finds them
to be the same, but the conditional that tests for the input and output of
ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.
We know that netdev_priv(t->dev) is the same as t for a tunnel device,
and comparing "dev" directly here lets the compiler figure out as well
that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so
it no longer warns.
This code is old, so Cc stable to make sure that we don't get the warning
for older kernels built with new gcc.
Cc: Martin Sebor <msebor@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a8c6db1dfd1b1d18359241372bb204054f2c3174 ]
In fib_nh_match(), if output interface or gateway are passed in
the FIB configuration, we don't have to check next hops of
multipath routes to conclude whether we have a match or not.
However, we might still have routes with different realms
matching the same output interface and gateway configuration,
and this needs to cause the match to fail. Otherwise the first
route inserted in the FIB will match, regardless of the realms:
# ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2
# ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4
# ip route list table 1234
1.1.1.1 dev eth0 scope link realms 1/2
1.1.1.1 dev eth0 scope link realms 3/4
# ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4
# ip route list table 1234
1.1.1.1 dev ens3 scope link realms 3/4
whereas route with realms 3/4 should have been deleted instead.
Explicitly check for fc_flow passed in the FIB configuration
(this comes from RTA_FLOW extracted by rtm_to_fib_config()) and
fail matching if it differs from nh_tclassid.
The handling of RTA_FLOW for multipath routes later in
fib_nh_match() is still needed, as we can have multiple RTA_FLOW
attributes that need to be matched against the tclassid of each
next hop.
v2: Check that fc_flow is set before discarding the match, so
that the user can still select the first matching rule by
not specifying any realm, as suggested by David Ahern.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1b12580af1d0677c3c3a19e35bfe5d59b03f737f ]
Now br_sysfs_if file flush doesn't have attr show. To read it will
cause kernel panic after users chmod u+r this file.
Xiong found this issue when running the commands:
ip link add br0 type bridge
ip link add type veth
ip link set veth0 master br0
chmod u+r /sys/devices/virtual/net/veth0/brport/flush
timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush
kernel crashed with NULL a pointer dereference call trace.
This patch is to fix it by return -EINVAL when brport_attr->show
is null, just the same as the check for brport_attr->store in
brport_store().
Fixes: 9cf637473c85 ("bridge: add sysfs hook to flush forwarding table")
Reported-by: Xiong Zhou <xzhou@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
