summaryrefslogtreecommitdiff
path: root/drivers/of
AgeCommit message (Collapse)Author
2016-12-15Merge tag 'pci-v4.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes: - add support for PCI on ARM64 boxes with ACPI. We already had this for theoretical spec-compliant hardware; now we're adding quirks for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene) - add runtime PM support for hotplug ports - enable runtime suspend for Intel UHCI that uses platform-specific wakeup signaling - add yet another host bridge registration interface. We hope this is extensible enough to subsume the others - expose device revision in sysfs for DRM - to avoid device conflicts, make sure any VF BAR updates are done before enabling the VF - avoid unnecessary link retrains for ASPM - allow INTx masking on Mellanox devices that support it - allow access to non-standard VPD for Chelsio devices - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA, etc - update Rockchip support for max-link-speed - add NVIDIA Tegra210 support - add Layerscape LS1046a support - update R-Car compatibility strings - add Qualcomm MSM8996 support - remove some uninformative bootup messages" * tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits) PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h x86/platform/intel-mid: Constify mid_pci_platform_pm PCI/ASPM: Don't retrain link if ASPM not possible PCI: iproc: Skip check for legacy IRQ on PAXC buses PCI: pciehp: Leave power indicator on when enabling already-enabled slot PCI: pciehp: Prioritize data-link event over presence detect PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar PCI: rcar: Use gen2 fallback compatibility last PCI: rcar-gen2: Use gen2 fallback compatibility last PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() ..
2016-12-15Merge tag 'devicetree-for-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - add various vendor prefixes. - fix NUMA node handling when "numa=off" is passed on kernel command line. - coding style Clean-up of overlay handling code. - DocBook fixes in DT platform driver code - Altera SoCFPGA binding addtions for freeze bridge, arria10 FPGA manager and FPGA bridges. - a couple of printk message fixes. * tag 'devicetree-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (33 commits) dt: pwm: bcm2835: fix typo in clocks property name devicetree: add vendor prefix for National Instruments Revert "of: base: add support to get machine model name" of: Fix issue where code would fall through to error case. drivers/of: fix missing pr_cont()s in of_print_phandle_args devicetree: bindings: Add vendor prefix for Oki devicetree: bindings: Add vendor prefix for Andes Technology Corporation dt-bindings: add MYIR Tech hardware vendor prefix add bindings document for altera freeze bridge ARM: socfpga: add bindings doc for arria10 fpga manager ARM: socfpga: add bindings document for fpga bridge drivers of: base: add support to get machine model name of/platform: clarify of_find_device_by_node refcounting of/platform: fix of_platform_device_destroy comment of: Remove unused variable overlay_symbols of: Move setting of pointer to beside test for non-null of: Add back an error message, restructured of: Update comments to reflect changes and increase clarity of: Remove redundant size check of: Update structure of code to be clearer, also remove BUG_ON() ...
2016-12-14Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "Fairly routine update this time around with all changes specific to drivers: - New driver for STMicroelectronics FDMA - Memory-to-memory transfers on dw dmac - Support for slave maps on pl08x devices - Bunch of driver fixes to use dma_pool_zalloc - Bunch of compile and warning fixes spread across drivers" [ The ST FDMA driver already came in earlier through the remoteproc tree ] * tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: sirf-dma: remove unused ‘sdesc’ dmaengine: pl330: remove unused ‘regs’ dmaengine: s3c24xx: remove unused ‘cdata’ dmaengine: stm32-dma: remove unused ‘src_addr’ dmaengine: stm32-dma: remove unused ‘dst_addr’ dmaengine: stm32-dma: remove unused ‘sfcr’ dmaengine: pch_dma: remove unused ‘cookie’ dmaengine: mic_x100_dma: remove unused ‘data’ dmaengine: img-mdc: remove unused ‘prev_phys’ dmaengine: usb-dmac: remove unused ‘uchan’ dmaengine: ioat: remove unused ‘res’ dmaengine: ioat: remove unused ‘ioat_dma’ dmaengine: ioat: remove unused ‘is_raid_device’ dmaengine: pl330: do not generate unaligned access dmaengine: k3dma: move to dma_pool_zalloc dmaengine: at_hdmac: move to dma_pool_zalloc dmaengine: at_xdmac: don't restore unsaved status dmaengine: ioat: set error code on failures dmaengine: ioat: set error code on failures dmaengine: DW DMAC: add multi-block property to device tree ...
2016-12-13Merge tag 'char-misc-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny changes over lots of "minor" driver subsystems, the largest being some new FPGA drivers. Other than that, a few other new drivers, but no new driver subsystems added for this kernel cycle, a nice change. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits) uio-hv-generic: store physical addresses instead of virtual Tools: hv: kvp: configurable external scripts path uio-hv-generic: new userspace i/o driver for VMBus vmbus: add support for dynamic device id's hv: change clockevents unbind tactics hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels() hyperv: Fix spelling of HV_UNKOWN mei: bus: enable non-blocking RX mei: fix the back to back interrupt handling mei: synchronize irq before initiating a reset. VME: Remove shutdown entry from vme_driver auxdisplay: ht16k33: select framebuffer helper modules MAINTAINERS: add git url for fpga fpga: Clarify how write_init works streaming modes fpga zynq: Fix incorrect ISR state on bootup fpga zynq: Remove priv->dev fpga zynq: Add missing \n to messages fpga: Add COMPILE_TEST to all drivers uio: pruss: add clk_disable() char/pcmcia: add some error checking in scr24x_read() ...
2016-12-12of/fdt: mark hotpluggable memoryReza Arbab
When movable nodes are enabled, any node containing only hotpluggable memory is made movable at boot time. On x86, hotpluggable memory is discovered by parsing the ACPI SRAT, making corresponding calls to memblock_mark_hotplug(). If we introduce a dt property to describe memory as hotpluggable, configs supporting early fdt may then also do this marking and use movable nodes. Link: http://lkml.kernel.org/r/1479160961-25840-5-git-send-email-arbab@linux.vnet.ibm.com Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com> Tested-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alistair Popple <apopple@au1.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-09Revert "of: base: add support to get machine model name"Rob Herring
This reverts commit e5269794d2e9046dd45be15bdb213a229df46b7e.
2016-12-09of: Fix issue where code would fall through to error case.Moritz Fischer
No longer fall through into the error case that prints out an error if no error (err = 0) occurred. Fixes d9181b20a83(of: Add back an error message, restructured) Signed-off-by: Moritz Fischer <mdf@kernel.org> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-12-09drivers/of: fix missing pr_cont()s in of_print_phandle_argsMarcin Nowakowski
Since the KERN_CONT changes, the current debug printks have a lot of empty lines making the log messages very hard to read. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-29of_mdio: add helper to deregister fixed-link PHYsJohan Hovold
Add helper to deregister fixed-link PHYs registered using of_phy_register_fixed_link(). Convert the two drivers that care to deregister their fixed-link PHYs to use the new helper, but note that most drivers currently fail to do so. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18of: base: add support to get machine model nameSudeep Holla
Currently platforms/drivers needing to get the machine model name are replicating the same snippet of code. In some case, the OF reference counting is either missing or incorrect. This patch adds support to read the machine model name either using the "model" or the "compatible" property in the device tree root node to the core OF/DT code. This can be used to remove all the duplicate code snippets doing exactly same thing later. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-17of_mdio: fix device reference leak in of_phy_find_deviceJohan Hovold
Make sure to drop the reference taken by bus_find_device() before returning NULL from of_phy_find_device() when the found device is not a PHY. Fixes: 6ed742363b9c ("of: of_mdio: Ensure mdio device is a PHY") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17of_mdio: fix node leak in of_phy_register_fixed_link error pathJohan Hovold
Make sure to drop the of_node reference also on failure to parse the speed property in of_phy_register_fixed_link(). Fixes: 3be2a49e5c08 ("of: provide a binding for fixed link PHYs") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15of/platform: clarify of_find_device_by_node refcountingJohan Hovold
Add comment clarifying that of_find_device_by_node() takes a reference to the embedded struct device which needs to be dropped after use. Note that most current users fail to do so. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of/platform: fix of_platform_device_destroy commentJohan Hovold
Update the comment to of_platform_device_destroy() to reflect that it no longer returns a status value. Fixes: 75f353b61342 ("of/platform: Fix of_platform_device_destroy...") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Remove unused variable overlay_symbolsFrank Rowand
Remove unused pointer to node "__symbols__". Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Move setting of pointer to beside test for non-nullFrank Rowand
Value of pointer was calculated in an earlier block than where it was used. Move it down into the block where it is used, immediately before where is is checked to be valid. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Add back an error message, restructuredFrank Rowand
Add a single pr_err() to cover a range of errors that were reported by several pr_err() that were removed earlier in this series. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Update comments to reflect changes and increase clarityFrank Rowand
Update comments to better explain what functions are doing. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Remove redundant size checkFrank Rowand
Remove a redundant check of buffer size. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Update structure of code to be clearer, also remove BUG_ON()Frank Rowand
Remove BUG_ON(), which is frowned upon and not needed here. Restructure to remove some excessive complexity. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Rename variables to better reflect purpose or follow conventionFrank Rowand
Rename variables to better reflect what their purpose is. As a side effect, this reduces the need for some of the comments previously removed in this series. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Remove prefix "__of_" from local function namesFrank Rowand
Remove "__of_" prefix from local function names. The pattern of a leading "__" is used in drivers/of/ to signify a function that must be called with a lock held. These functions do not fit that pattern. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Rename functions to more accurately reflect what they doFrank Rowand
Some function names are misleading or do not provide a good sense of what they do. Rename the functions to ne more informative. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Convert comparisons to zero or NULL to logical expressionsFrank Rowand
Convert comparisons to zero or NULL to logical expressions. A small number of such comparisons remain where they provide more clarity of the numeric nature of a variable. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Remove excessive printks to reduce clutter.Frank Rowand
Remove extra debug and error printks. A single pr_err() will be added at the end of this series to replace many of these error messages. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of: Remove comments that state the obvious, to reduce clutterFrank Rowand
Remove comments that report what is obvious from the code. Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-15of, numa: Return NUMA_NO_NODE from disable of_node_to_nid() if nid not possible.David Daney
On arm64 NUMA kernels we can pass "numa=off" on the command line to disable NUMA. A side effect of this is that kmalloc_node() calls to non-zero nodes will crash the system with an OOPS: [ 0.000000] ITS@0x0000901000020000: allocated 2097152 Devices @10002000000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00001680 [ 0.000000] pgd = fffffc0009470000 [ 0.000000] [00001680] *pgd=0000010ffff90003, *pud=0000010ffff90003, *pmd=0000010ffff90003, *pte=0000000000000000 [ 0.000000] Internal error: Oops: 96000006 [#1] SMP . . . [ 0.000000] [<fffffc00081c8950>] __alloc_pages_nodemask+0xa4/0xe68 [ 0.000000] [<fffffc000821fa70>] new_slab+0xd0/0x564 [ 0.000000] [<fffffc0008221e24>] ___slab_alloc+0x2e4/0x514 [ 0.000000] [<fffffc0008239498>] __slab_alloc+0x48/0x58 [ 0.000000] [<fffffc0008222c20>] __kmalloc_node+0xd0/0x2dc [ 0.000000] [<fffffc0008115374>] __irq_domain_add+0x7c/0x164 [ 0.000000] [<fffffc0008b461dc>] its_probe+0x784/0x81c [ 0.000000] [<fffffc0008b462bc>] its_init+0x48/0x1b0 [ 0.000000] [<fffffc0008b4543c>] gic_init_bases+0x228/0x360 [ 0.000000] [<fffffc0008b456bc>] gic_of_init+0x148/0x1cc [ 0.000000] [<fffffc0008b5aec8>] of_irq_init+0x184/0x298 [ 0.000000] [<fffffc0008b43f9c>] irqchip_init+0x14/0x38 [ 0.000000] [<fffffc0008b12d60>] init_IRQ+0xc/0x30 [ 0.000000] [<fffffc0008b10a3c>] start_kernel+0x240/0x3b8 [ 0.000000] [<fffffc0008b101c4>] __primary_switched+0x30/0x6c [ 0.000000] Code: 912ec2a0 b9403809 0a0902fb 37b007db (f9400300) . . . This is caused by code like this in kernel/irq/irqdomain.c domain = kzalloc_node(sizeof(*domain) + (sizeof(unsigned int) * size), GFP_KERNEL, of_node_to_nid(of_node)); When NUMA is disabled, the concept of a node is really undefined, so of_node_to_nid() should unconditionally return NUMA_NO_NODE. Fix by returning NUMA_NO_NODE when the nid is not in the set of possible nodes. Reported-by: Gilbert Netzer <noname@pdc.kth.se> Signed-off-by: David Daney <david.daney@cavium.com> Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Rob Herring <robh@kernel.org>
2016-11-14of/pci: Add of_pci_get_max_link_speed() to parse max-link-speed from DTShawn Lin
This new helper function could be used by host drivers to get the limitaion of max link speed provided by DT. If the property isn't assigned or is invalid, it will return -EINVAL to the caller. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rob Herring <robh@kernel.org>
2016-11-14Merge 4.9-rc5 into char-misc-nextGreg Kroah-Hartman
We want those fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-11Revert "console: don't prefer first registered if DT specifies stdout-path"Hans de Goede
This reverts commit 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path"). The reverted commit changes existing behavior on which many ARM boards rely. Many ARM small-board-computers, like e.g. the Raspberry Pi have both a video output and a serial console. Depending on whether the user is using the device as a more regular computer; or as a headless device we need to have the console on either one or the other. Many users rely on the kernel behavior of the console being present on both outputs, before the reverted commit the console setup with no console= kernel arguments on an ARM board which sets stdout-path in dt would look like this: [root@localhost ~]# cat /proc/consoles ttyS0 -W- (EC p a) 4:64 tty0 -WU (E p ) 4:1 Where as after the reverted commit, it looks like this: [root@localhost ~]# cat /proc/consoles ttyS0 -W- (EC p a) 4:64 This commit reverts commit 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path") restoring the original behavior. Fixes: 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path") Link: http://lkml.kernel.org/r/20161104121135.4780-2-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-10of/overlay: add of overlay notificationsAlan Tull
This patch add of overlay notifications. When DT overlays are being added, some drivers/subsystems need to see device tree overlays before the changes go into the live tree. This is distinct from reconfig notifiers that are post-apply or post-remove and which issue very granular notifications without providing access to the context of a whole overlay. The following 4 notificatons are issued: OF_OVERLAY_PRE_APPLY OF_OVERLAY_POST_APPLY OF_OVERLAY_PRE_REMOVE OF_OVERLAY_POST_REMOVE In the case of pre-apply notification, if the notifier returns error, the overlay will be rejected. This patch exports two functions for registering/unregistering notifications: of_overlay_notifier_register(struct notifier_block *nb) of_overlay_notifier_unregister(struct notifier_block *nb) The of_mutex is held during these notifications. The notification data includes pointers to the overlay target and the overlay: struct of_overlay_notify_data { struct device_node *overlay; struct device_node *target; }; Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-19of: irq: make of_msi_configure accessible from modulesSinan Kaya
The of_msi_configure routine is only accessible by the built-in kernel drivers. Export this function so that modules can use it too. This function is useful for configuring MSI on child device tree nodes on hierarchical objects. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
2016-10-11Merge tag 'iommu-updates-v4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - support for interrupt virtualization in the AMD IOMMU driver. These patches were shared with the KVM tree and are already merged through that tree. - generic DT-binding support for the ARM-SMMU driver. With this the driver now makes use of the generic DMA-API code. This also required some changes outside of the IOMMU code, but these are acked by the respective maintainers. - more cleanups and fixes all over the place. * tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (40 commits) iommu/amd: No need to wait iommu completion if no dte irq entry change iommu/amd: Free domain id when free a domain of struct dma_ops_domain iommu/amd: Use standard bitmap operation to set bitmap iommu/amd: Clean up the cmpxchg64 invocation iommu/io-pgtable-arm: Check for v7s-incapable systems iommu/dma: Avoid PCI host bridge windows iommu/dma: Add support for mapping MSIs iommu/arm-smmu: Set domain geometry iommu/arm-smmu: Wire up generic configuration support Docs: dt: document ARM SMMU generic binding usage iommu/arm-smmu: Convert to iommu_fwspec iommu/arm-smmu: Intelligent SMR allocation iommu/arm-smmu: Add a stream map entry iterator iommu/arm-smmu: Streamline SMMU data lookups iommu/arm-smmu: Refactor mmu-masters handling iommu/arm-smmu: Keep track of S2CR state iommu/arm-smmu: Consolidate stream map entry state iommu/arm-smmu: Handle stream IDs more dynamically iommu/arm-smmu: Set PRIVCFG in stage 1 STEs iommu/arm-smmu: Support non-PCI devices with SMMUv3 ...
2016-10-10Merge tag 'for-linus-20161008' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "I've not been very active this cycle, so these are mostly from Boris, for the NAND flash subsystem. NAND: - Add the infrastructure to automate NAND timings configuration - Provide a generic DT property to maximize ECC strength - Some refactoring in the core bad block table handling, to help with improving some of the logic in error cases. - Minor cleanups and fixes MTD: - Add APIs for handling page pairing; this is necessary for reliably supporting MLC and TLC NAND flash, where paired-page disturbance affects reliability. Upper layers (e.g., UBI) should make use of these in the near future" * tag 'for-linus-20161008' of git://git.infradead.org/linux-mtd: (35 commits) mtd: nand: fix trivial spelling error mtdpart: Propagate _get/put_device() mtd: nand: Provide nand_cleanup() function to free NAND related resources mtd: Kill the OF_MTD Kconfig option mtd: nand: mxc: Test CONFIG_OF instead of CONFIG_OF_MTD mtd: nand: Fix nand_command_lp() for 8bits opcodes mtd: nand: sunxi: Support ECC maximization mtd: nand: Support maximizing ECC when using software BCH mtd: nand: Add an option to maximize the ECC strength mtd: nand: mxc: Add timing setup for v2 controllers mtd: nand: mxc: implement onfi get/set features mtd: nand: sunxi: switch from manual to automated timing config mtd: nand: automate NAND timings selection mtd: nand: Expose data interface for ONFI mode 0 mtd: nand: Add function to convert ONFI mode to data_interface mtd: nand: convert ONFI mode into data interface mtd: nand: Introduce nand_data_interface mtd: nand: Create a NAND reset function mtd: nand: remove unnecessary 'extern' from function declarations MAINTAINERS: Add maintainer entry for Ingenic JZ4780 NAND driver ...
2016-10-07console: don't prefer first registered if DT specifies stdout-pathPaul Burton
If a device tree specifies a preferred device for kernel console output via the stdout-path or linux,stdout-path chosen node properties or the stdout alias then the kernel ought to honor it & output the kernel console to that device. As it stands, this isn't the case. Whilst we parse the stdout-path properties & set an of_stdout variable from of_alias_scan(), and use that from of_console_check() to determine whether to add a console device as a preferred console whilst registering it, we also prefer the first registered console if no other has been selected at the time of its registration. This means that if a console other than the one the device tree selects via stdout-path is registered first, we will switch to using it & when the stdout-path console is later registered the call to add_preferred_console() via of_console_check() is too late to do anything useful. In practice this seems to mean that we switch to the dummy console device fairly early & see no further console output: Console: colour dummy device 80x25 console [tty0] enabled bootconsole [ns16550a0] disabled Fix this by not automatically preferring the first registered console if one is specified by the device tree. This allows consoles to be registered but not enabled, and once the driver for the console selected by stdout-path calls of_console_check() the driver will be added to the list of preferred consoles before any other console has been enabled. When that console is then registered via register_console() it will be enabled as expected. Link: http://lkml.kernel.org/r/20160809151937.26118-1-paul.burton@imgtec.com Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Tejun Heo <tj@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ivan Delalande <colona@arista.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jan Kara <jack@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Perches <joe@perches.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-06of/platform: Probe "isa" busses by defaultPaul Burton
Since commit 44a7185c2ae6 ("of/platform: Add common method to populate default bus") platforms calling of_platform_bus_probe from an initcall is either a rather unsafe race with of_platform_default_populate_init or a no-op. The MIPS Malta board needs to probe devices under an ISA bus, which we do support in the of_busses array but until now haven't included in of_default_bus_match_table. Add an "isa" entry to of_default_bus_match_table such that we can just accept use of of_platform_default_populate_init & remove the Malta-specific match table in a later patch. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14275/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05Merge tag 'devicetree-for-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - update changeset documentation on locking to reflect current code - fix alphabetizing of vendor-prefixes.txt - add various vendor prefixes - add ESP8089 WiFi binding - add new variable sized array parsing functions * tag 'devicetree-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits) DT: irqchip: renesas-irqc: document R8A7743/5 support dt-bindings: Add Keith&Koep vendor prefix dt-bindings: add vendor prefix for Auvidea GmbH of: Add vendor prefix for Engicam s.r.l company devicetree: Add vendor-prefix for Silead Inc. devicetree: bindings: Add vendor prefix for Topeet. dt-bindings: Add summit vendor id of/platform: Initialise dev->fwnode appropriately of: Add array read functions with min/max size limits of: Make of_find_property_value_of_size take a length range dt: net: enhance DWC EQoS binding to support Tegra186 bindings: PCI: artpec: correct pci binding example Documentation: devicetree: Fix max77693 spelling errors dt: bindings: Add binding for ESP8089 wifi chips PCI: Xilinx NWL PCIe: Updating device tree documentation with prefetchable memory space Documentation: devicetree: spi: fix wrong spi-bus documentation dt-bindings: Add Japan Display Inc vendor id dt-bindings: vendor-prefixes: Add Sierra Wireless devicetree: Add vendor prefix for Shenzhen Sunchip Technology Co., Ltd devicetree: Sort vendor prefixes in alphabetical order ...
2016-10-03Merge tag 'tty-4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big tty and serial patch set for 4.9-rc1. It also includes some drivers/dma/ changes, as those were needed by some serial drivers, and they were all acked by the DMA maintainer. Also in here is the long-suffering ACPI SPCR patchset, which was passed around from maintainer to maintainer like a hot-potato. Seems I was the sucker^Wlucky one. All of those patches have been acked by the various subsystem maintainers as well. All of this has been in linux-next with no reported issues" * tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits) Revert "serial: pl011: add console matching function" MAINTAINERS: update entry for atmel_serial driver serial: pl011: add console matching function ARM64: ACPI: enable ACPI_SPCR_TABLE ACPI: parse SPCR and enable matching console of/serial: move earlycon early_param handling to serial Revert "drivers/tty: Explicitly pass current to show_stack" tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq nios2: dts: 10m50: Add tx-threshold parameter serial: 8250: Set Altera 16550 TX FIFO Threshold serial: 8250: of: Load TX FIFO Threshold from DT Documentation: dt: serial: Add TX FIFO threshold parameter drivers/tty: Explicitly pass current to show_stack serial: imx: Fix DCD reading serial: stm32: mark symbols static where possible serial: xuartps: Add some register initialisation to cdns_early_console_setup() serial: xuartps: Removed unwanted checks while reading the error conditions serial: xuartps: Rewrite the interrupt handling logic serial: stm32: use mapbase instead of membase for DMA tty/serial: atmel: fix fractional baud rate computation ...
2016-09-28of/serial: move earlycon early_param handling to serialLeif Lindholm
We have multiple "earlycon" early_param handlers - merge the DT one into the main earlycon one. It's a cleanup that also will be useful to defer setting up DT console until ACPI/DT decision is made. Rename the exported function to avoid clashing with the function from arch/microblaze/kernel/prom.c Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-23mtd: Kill the OF_MTD Kconfig optionBoris Brezillon
Commit d48f62b9a0a0 ("mtd: nand: move of_get_nand_xxx() helpers into nand_base.c") removed the drivers/of/of_mtd.c file but did not remove the associated OF_MTD Kconfig option. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-09-16of/irq: Break out msi-map lookup (again)Robin Murphy
The PCI msi-map code is already doing double-duty translating IDs and retrieving MSI parents, which unsurprisingly is the same functionality we need for the identically-formatted PCI iommu-map property. Drag the core parsing routine up yet another layer into the general OF-PCI code, and further generalise it for either kind of lookup in either flavour of map property. Acked-by: Rob Herring <robh+dt@kernel.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-15of/platform: Initialise dev->fwnode appropriatelyRobin Murphy
Whilst we're some of the way towards a universal firmware property interface, drivers which deal with both OF and ACPI probing end up having to do things like this: dev->of_node ? &dev->of_node->fwnode : dev->fwnode This seems unnecessary, when the OF code could instead simply fill in the device's fwnode when binding the of_node, and let the drivers use dev->fwnode either way. Let's give it a go and see what falls out. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-15of: Add array read functions with min/max size limitsRichard Fitzgerald
Add a new set of array reading functions that take a minimum and maximum size limit and will fail if the property size is not within the size limits. This makes it more convenient for drivers that use variable-size DT arrays which must be bounded at both ends - data must be at least N entries but must not overflow the array it is being copied into. It is also more efficient than making this functionality out of existing public functions and avoids duplication. The existing array functions have been left in the API, since there are a very large number of clients of those functions and their existing functionality is still useful. This avoids turning a small API improvement into a major kernel rework. The old functions have been turned into mininmal static inlines calling the new functions. The old functions had no upper limit on the actual size of the dts entry, to preserve this functionality rather than keeping two near-identical implementations, if the new function is called with max=0 there is no limit on the size of the dts entry but only the min number of elements are read. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-15of: Make of_find_property_value_of_size take a length rangeRichard Fitzgerald
In preparation for adding variable-length array reads, change of_find_property_value_of_size so that it takes an optional maximum length. If the maximum is passed as 0, the behaviour is unchanged and it will return a property if it's >= the requested minimum length. If maximum is non-zero it will only return a property whose length is min <= l <= max. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-09of_numa: Use pr_fmt()Kefeng Wang
Use pr_fmt to prefix kernel output. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09of_numa: Use of_get_next_parent to simplify codeKefeng Wang
Use of_get_next_parent() instead of open-code. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09of/numa: remove a duplicated warningZhen Lei
This warning has been printed in of_numa_parse_cpu_nodes before. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09of/numa: add nid check for memory blockZhen Lei
If the numa-id which was configured in memory@ devicetree node is greater than MAX_NUMNODES, we should report a warning. We have done this for cpus and distance-map dt nodes, this patch help them to be consistent. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-09of/numa: fix a memory@ node can only contains one memory blockZhen Lei
For a normal memory@ devicetree node, its reg property can contains more memory blocks. Because we don't known how many memory blocks maybe contained, so we try from index=0, increase 1 until error returned(the end). Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com>