2 files changed, 19 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index 0d0c1ae81bed..790e6b0b8306 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -164,6 +164,8 @@ Control registers for this memory controller's DDR PHY.
 
 Required properties:
 - compatible     : should contain one of these
+	"brcm,brcmstb-ddr-phy-v71.1"
+	"brcm,brcmstb-ddr-phy-v72.0"
 	"brcm,brcmstb-ddr-phy-v225.1"
 	"brcm,brcmstb-ddr-phy-v240.1"
 	"brcm,brcmstb-ddr-phy-v240.2"
@@ -184,7 +186,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh
 Power-Down (SRPD), among other things.
 
 Required properties:
-- compatible     : should contain "brcm,brcmstb-memc-ddr"
+- compatible     : should contain one of these
+	"brcm,brcmstb-memc-ddr-rev-b.2.2"
+	"brcm,brcmstb-memc-ddr"
 - reg            : the MEMC DDR register range
 
 Example:
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
new file mode 100644
index 000000000000..a124c7fc4dcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
@@ -0,0 +1,14 @@
+Broadcom Hurricane 2 device tree bindings
+---------------------------------------
+
+Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
+are based on Broadcom's iProc SoC architecture and feature a single core Cortex
+A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND
+flash and a PCIe attached integrated switching engine.
+
+Boards with Hurricane SoCs shall have the following properties:
+
+Required root node property:
+
+BCM53342
+compatible = "brcm,bcm53342", "brcm,hr2";