Merge branch 'i2c/for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 -I2C core now reports proper OF style module alias. I'd like to repeat
  the note from the commit msg here (Thanks, Javier!):

      NOTE: This patch may break out-of-tree drivers that were relying
            on this behavior, and only had an I2C device ID table even
            when the device was registered via OF.

            There are no remaining drivers in mainline that do this, but
            out-of-tree drivers have to be fixed and define a proper OF
            device ID table to have module auto-loading working.

 - new driver for the SynQuacer I2C controller

 - major refactoring of the QUP driver

 - the piix4 driver now uses request_muxed_region which should fix a
   long standing resource conflict with the sp5100_tco watchdog

 - a bunch of small core & driver improvements

* 'i2c/for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
  i2c: add support for Socionext SynQuacer I2C controller
  dt-bindings: i2c: add binding for Socionext SynQuacer I2C
  i2c: Update i2c_trace_msg static key to modern api
  i2c: fix parameter of trace_i2c_result
  i2c: imx: avoid taking clk_prepare mutex in PM callbacks
  i2c: imx: use clk notifier for rate changes
  i2c: make i2c_check_addr_validity() static
  i2c: rcar: fix mask value of prohibited bit
  dt-bindings: i2c: document R8A77965 bindings
  i2c: pca-platform: drop gpio from platform data
  i2c: pca-platform: use device_property_read_u32
  i2c: pca-platform: unconditionally use devm_gpiod_get_optional
  sh: sh7785lcr: add GPIO lookup table for i2c controller reset
  i2c: qup: reorganization of driver code to remove polling for qup v2
  i2c: qup: reorganization of driver code to remove polling for qup v1
  i2c: qup: send NACK for last read sub transfers
  i2c: qup: fix buffer overflow for multiple msg of maximum xfer len
  i2c: qup: change completion timeout according to transfer length
  i2c: qup: use the complete transfer length to choose DMA mode
  i2c: qup: proper error handling for i2c error in BAM mode
  ...

1 files changed, 49 insertions, 6 deletions

diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index fbb84c7ef282..09bafd3e68fa 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -77,6 +77,7 @@ struct chip_desc {
 		pca954x_ismux = 0,
 		pca954x_isswi
 	} muxtype;
+	struct i2c_device_identity id;
 };
 
 struct pca954x {
@@ -97,59 +98,83 @@ static const struct chip_desc chips[] = {
 		.nchans = 2,
 		.enable = 0x4,
 		.muxtype = pca954x_ismux,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 	},
 	[pca_9542] = {
 		.nchans = 2,
 		.enable = 0x4,
 		.has_irq = 1,
 		.muxtype = pca954x_ismux,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 	},
 	[pca_9543] = {
 		.nchans = 2,
 		.has_irq = 1,
 		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 	},
 	[pca_9544] = {
 		.nchans = 4,
 		.enable = 0x4,
 		.has_irq = 1,
 		.muxtype = pca954x_ismux,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 	},
 	[pca_9545] = {
 		.nchans = 4,
 		.has_irq = 1,
 		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 	},
 	[pca_9546] = {
 		.nchans = 4,
 		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 	},
 	[pca_9547] = {
 		.nchans = 8,
 		.enable = 0x8,
 		.muxtype = pca954x_ismux,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 	},
 	[pca_9548] = {
 		.nchans = 8,
 		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
 	},
 	[pca_9846] = {
 		.nchans = 4,
 		.muxtype = pca954x_isswi,
+		.id = {
+			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
+			.part_id = 0x10b,
+		},
 	},
 	[pca_9847] = {
 		.nchans = 8,
 		.enable = 0x8,
 		.muxtype = pca954x_ismux,
+		.id = {
+			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
+			.part_id = 0x108,
+		},
 	},
 	[pca_9848] = {
 		.nchans = 8,
 		.muxtype = pca954x_isswi,
+		.id = {
+			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
+			.part_id = 0x10a,
+		},
 	},
 	[pca_9849] = {
 		.nchans = 4,
 		.enable = 0x4,
 		.muxtype = pca954x_ismux,
+		.id = {
+			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
+			.part_id = 0x109,
+		},
 	},
 };
 
@@ -369,6 +394,30 @@ static int pca954x_probe(struct i2c_client *client,
 	if (IS_ERR(gpio))
 		return PTR_ERR(gpio);
 
+	match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
+	if (match)
+		data->chip = of_device_get_match_data(&client->dev);
+	else
+		data->chip = &chips[id->driver_data];
+
+	if (data->chip->id.manufacturer_id != I2C_DEVICE_ID_NONE) {
+		struct i2c_device_identity id;
+
+		ret = i2c_get_device_id(client, &id);
+		if (ret && ret != -EOPNOTSUPP)
+			return ret;
+
+		if (!ret &&
+		    (id.manufacturer_id != data->chip->id.manufacturer_id ||
+		     id.part_id != data->chip->id.part_id)) {
+			dev_warn(&client->dev,
+				 "unexpected device id %03x-%03x-%x\n",
+				 id.manufacturer_id, id.part_id,
+				 id.die_revision);
+			return -ENODEV;
+		}
+	}
+
 	/* Write the mux register at addr to verify
 	 * that the mux is in fact present. This also
 	 * initializes the mux to disconnected state.
@@ -378,12 +427,6 @@ static int pca954x_probe(struct i2c_client *client,
 		return -ENODEV;
 	}
 
-	match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
-	if (match)
-		data->chip = of_device_get_match_data(&client->dev);
-	else
-		data->chip = &chips[id->driver_data];
-
 	data->last_chan = 0;		   /* force the first selection */
 
 	idle_disconnect_dt = of_node &&