diff options
author | Vignesh R <vigneshr@ti.com> | 2018-02-08 18:25:41 +0530 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2018-05-25 16:46:19 +0200 |
commit | f315308ee5e55deb25a27331175525d0e77acdd4 (patch) | |
tree | 35ad916b42d94ed7f6b05ff3ab2dbfacd01af5a0 | |
parent | e9d60298c45289dd982728687959a3763cbd0969 (diff) |
serial: 8250: Don't service RX FIFO if interrupts are disabled
[ Upstream commit 2e9fe539108320820016f78ca7704a7342788380 ]
Currently, data in RX FIFO is read based on UART_LSR register state even
if RDI and RLSI interrupts are disabled in UART_IER register.
This is because when IRQ handler is called due to TX FIFO empty event,
RX FIFO is serviced based on UART_LSR register status instead of
UART_IIR status. This defeats the purpose of disabling UART RX
FIFO interrupts during throttling(see, omap_8250_throttle()) as IRQ
handler continues to drain UART RX FIFO resulting in overflow of buffer
at tty layer.
Fix this by making sure that driver drains UART RX FIFO only when
UART_IIR_RDI is set along with UART_LSR_BI or UART_LSR_DR bits.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 804c1af6fd33..95833cbc4338 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1867,7 +1867,8 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) status = serial_port_in(port, UART_LSR); - if (status & (UART_LSR_DR | UART_LSR_BI)) { + if (status & (UART_LSR_DR | UART_LSR_BI) && + iir & UART_IIR_RDI) { if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); } |