summaryrefslogtreecommitdiff
path: root/gdb/testsuite/gdb.base/catch-syscall.exp
AgeCommit message (Collapse)Author
2018-01-02Update copyright year range in all GDB filesJoel Brobecker
gdb/ChangeLog: Update copyright year range in all GDB files
2017-01-01update copyright year range in GDB filesJoel Brobecker
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-12-23Fix more cases of improper test namesLuis Machado
I noticed more occurrences of improper test names. The rather mechanical, tedious and large patch below addresses, hopefully, most of the leftover cases. As usual, another pair of eyes is welcome to check if missed something or did an invalid substitution. This patch also fixes the prepare_for_testing calls to pass proper test names. gdb/testsuite/ChangeLog: 2016-12-23 Luis Machado <lgustavo@codesourcery.com> Fix test names for the following files: * gdb.ada/exec_changed.exp * gdb.ada/info_types.exp * gdb.arch/aarch64-atomic-inst.exp * gdb.arch/aarch64-fp.exp * gdb.arch/altivec-abi.exp * gdb.arch/altivec-regs.exp * gdb.arch/amd64-byte.exp * gdb.arch/amd64-disp-step.exp * gdb.arch/amd64-dword.exp * gdb.arch/amd64-entry-value-inline.exp * gdb.arch/amd64-entry-value-param.exp * gdb.arch/amd64-entry-value-paramref.exp * gdb.arch/amd64-entry-value.exp * gdb.arch/amd64-i386-address.exp * gdb.arch/amd64-invalid-stack-middle.exp * gdb.arch/amd64-invalid-stack-top.exp * gdb.arch/amd64-optimout-repeat.exp * gdb.arch/amd64-prologue-skip.exp * gdb.arch/amd64-prologue-xmm.exp * gdb.arch/amd64-stap-special-operands.exp * gdb.arch/amd64-stap-wrong-subexp.exp * gdb.arch/amd64-tailcall-cxx.exp * gdb.arch/amd64-tailcall-noret.exp * gdb.arch/amd64-tailcall-ret.exp * gdb.arch/amd64-tailcall-self.exp * gdb.arch/amd64-word.exp * gdb.arch/arm-bl-branch-dest.exp * gdb.arch/arm-disp-step.exp * gdb.arch/arm-neon.exp * gdb.arch/arm-single-step-kernel-helper.exp * gdb.arch/avr-flash-qualifier.exp * gdb.arch/disp-step-insn-reloc.exp * gdb.arch/e500-abi.exp * gdb.arch/e500-regs.exp * gdb.arch/ftrace-insn-reloc.exp * gdb.arch/i386-avx512.exp * gdb.arch/i386-bp_permanent.exp * gdb.arch/i386-byte.exp * gdb.arch/i386-cfi-notcurrent.exp * gdb.arch/i386-disp-step.exp * gdb.arch/i386-dr3-watch.exp * gdb.arch/i386-float.exp * gdb.arch/i386-gnu-cfi.exp * gdb.arch/i386-mpx-map.exp * gdb.arch/i386-mpx-sigsegv.exp * gdb.arch/i386-mpx-simple_segv.exp * gdb.arch/i386-mpx.exp * gdb.arch/i386-permbkpt.exp * gdb.arch/i386-prologue.exp * gdb.arch/i386-signal.exp * gdb.arch/i386-size-overlap.exp * gdb.arch/i386-unwind.exp * gdb.arch/i386-word.exp * gdb.arch/mips-fcr.exp * gdb.arch/powerpc-d128-regs.exp * gdb.arch/powerpc-stackless.exp * gdb.arch/ppc64-atomic-inst.exp * gdb.arch/s390-stackless.exp * gdb.arch/s390-tdbregs.exp * gdb.arch/s390-vregs.exp * gdb.arch/sparc-sysstep.exp * gdb.arch/thumb-bx-pc.exp * gdb.arch/thumb-singlestep.exp * gdb.arch/thumb2-it.exp * gdb.arch/vsx-regs.exp * gdb.asm/asm-source.exp * gdb.base/a2-run.exp * gdb.base/advance.exp * gdb.base/all-bin.exp * gdb.base/anon.exp * gdb.base/args.exp * gdb.base/arithmet.exp * gdb.base/async-shell.exp * gdb.base/async.exp * gdb.base/attach-pie-noexec.exp * gdb.base/attach-twice.exp * gdb.base/auto-load.exp * gdb.base/bang.exp * gdb.base/bitfields.exp * gdb.base/break-always.exp * gdb.base/break-caller-line.exp * gdb.base/break-entry.exp * gdb.base/break-inline.exp * gdb.base/break-on-linker-gcd-function.exp * gdb.base/break-probes.exp * gdb.base/break.exp * gdb.base/breakpoint-shadow.exp * gdb.base/call-ar-st.exp * gdb.base/call-sc.exp * gdb.base/call-signal-resume.exp * gdb.base/call-strs.exp * gdb.base/callfuncs.exp * gdb.base/catch-fork-static.exp * gdb.base/catch-gdb-caused-signals.exp * gdb.base/catch-load.exp * gdb.base/catch-signal-fork.exp * gdb.base/catch-signal.exp * gdb.base/catch-syscall.exp * gdb.base/charset.exp * gdb.base/checkpoint.exp * gdb.base/chng-syms.exp * gdb.base/code-expr.exp * gdb.base/code_elim.exp * gdb.base/commands.exp * gdb.base/completion.exp * gdb.base/complex.exp * gdb.base/cond-expr.exp * gdb.base/condbreak.exp * gdb.base/consecutive.exp * gdb.base/continue-all-already-running.exp * gdb.base/coredump-filter.exp * gdb.base/corefile.exp * gdb.base/dbx.exp * gdb.base/debug-expr.exp * gdb.base/define.exp * gdb.base/del.exp * gdb.base/disabled-location.exp * gdb.base/disasm-end-cu.exp * gdb.base/disasm-optim.exp * gdb.base/display.exp * gdb.base/duplicate-bp.exp * gdb.base/ena-dis-br.exp * gdb.base/ending-run.exp * gdb.base/enumval.exp * gdb.base/environ.exp * gdb.base/eu-strip-infcall.exp * gdb.base/eval-avoid-side-effects.exp * gdb.base/eval-skip.exp * gdb.base/exitsignal.exp * gdb.base/expand-psymtabs.exp * gdb.base/filesym.exp * gdb.base/find-unmapped.exp * gdb.base/finish.exp * gdb.base/float.exp * gdb.base/foll-exec-mode.exp * gdb.base/foll-exec.exp * gdb.base/foll-fork.exp * gdb.base/fortran-sym-case.exp * gdb.base/freebpcmd.exp * gdb.base/func-ptr.exp * gdb.base/func-ptrs.exp * gdb.base/funcargs.exp * gdb.base/gcore-buffer-overflow.exp * gdb.base/gcore-relro-pie.exp * gdb.base/gcore-relro.exp * gdb.base/gcore.exp * gdb.base/gdb1090.exp * gdb.base/gdb11530.exp * gdb.base/gdb11531.exp * gdb.base/gdb1821.exp * gdb.base/gdbindex-stabs.exp * gdb.base/gdbvars.exp * gdb.base/hbreak.exp * gdb.base/hbreak2.exp * gdb.base/included.exp * gdb.base/infcall-input.exp * gdb.base/inferior-died.exp * gdb.base/infnan.exp * gdb.base/info-macros.exp * gdb.base/info-os.exp * gdb.base/info-proc.exp * gdb.base/info-shared.exp * gdb.base/info-target.exp * gdb.base/infoline.exp * gdb.base/interp.exp * gdb.base/interrupt.exp * gdb.base/jit-reader.exp * gdb.base/jit-simple.exp * gdb.base/kill-after-signal.exp * gdb.base/kill-detach-inferiors-cmd.exp * gdb.base/label.exp * gdb.base/langs.exp * gdb.base/ldbl_e308.exp * gdb.base/line-symtabs.exp * gdb.base/linespecs.exp * gdb.base/list.exp * gdb.base/long_long.exp * gdb.base/longest-types.exp * gdb.base/maint.exp * gdb.base/max-value-size.exp * gdb.base/memattr.exp * gdb.base/mips_pro.exp * gdb.base/morestack.exp * gdb.base/moribund-step.exp * gdb.base/multi-forks.exp * gdb.base/nested-addr.exp * gdb.base/nextoverexit.exp * gdb.base/noreturn-finish.exp * gdb.base/noreturn-return.exp * gdb.base/nostdlib.exp * gdb.base/offsets.exp * gdb.base/opaque.exp * gdb.base/pc-fp.exp * gdb.base/permissions.exp * gdb.base/print-symbol-loading.exp * gdb.base/prologue-include.exp * gdb.base/psymtab.exp * gdb.base/ptype.exp * gdb.base/random-signal.exp * gdb.base/randomize.exp * gdb.base/range-stepping.exp * gdb.base/readline-ask.exp * gdb.base/recpar.exp * gdb.base/recurse.exp * gdb.base/relational.exp * gdb.base/restore.exp * gdb.base/return-nodebug.exp * gdb.base/return.exp * gdb.base/run-after-attach.exp * gdb.base/save-bp.exp * gdb.base/scope.exp * gdb.base/sect-cmd.exp * gdb.base/set-lang-auto.exp * gdb.base/set-noassign.exp * gdb.base/setvar.exp * gdb.base/sigall.exp * gdb.base/sigbpt.exp * gdb.base/siginfo-addr.exp * gdb.base/siginfo-infcall.exp * gdb.base/siginfo-obj.exp * gdb.base/siginfo.exp * gdb.base/signals-state-child.exp * gdb.base/signest.exp * gdb.base/sigstep.exp * gdb.base/sizeof.exp * gdb.base/skip.exp * gdb.base/solib-corrupted.exp * gdb.base/solib-nodir.exp * gdb.base/solib-search.exp * gdb.base/stack-checking.exp * gdb.base/stale-infcall.exp * gdb.base/stap-probe.exp * gdb.base/start.exp * gdb.base/step-break.exp * gdb.base/step-bt.exp * gdb.base/step-line.exp * gdb.base/step-over-exit.exp * gdb.base/step-over-syscall.exp * gdb.base/step-resume-infcall.exp * gdb.base/step-test.exp * gdb.base/store.exp * gdb.base/structs3.exp * gdb.base/sym-file.exp * gdb.base/symbol-without-target_section.exp * gdb.base/term.exp * gdb.base/testenv.exp * gdb.base/ui-redirect.exp * gdb.base/until.exp * gdb.base/unwindonsignal.exp * gdb.base/value-double-free.exp * gdb.base/vla-datatypes.exp * gdb.base/vla-ptr.exp * gdb.base/vla-sideeffect.exp * gdb.base/volatile.exp * gdb.base/watch-cond-infcall.exp * gdb.base/watch-cond.exp * gdb.base/watch-non-mem.exp * gdb.base/watch-read.exp * gdb.base/watch-vfork.exp * gdb.base/watchpoint-cond-gone.exp * gdb.base/watchpoint-delete.exp * gdb.base/watchpoint-hw-hit-once.exp * gdb.base/watchpoint-hw.exp * gdb.base/watchpoint-stops-at-right-insn.exp * gdb.base/watchpoints.exp * gdb.base/wchar.exp * gdb.base/whatis-exp.exp * gdb.btrace/buffer-size.exp * gdb.btrace/data.exp * gdb.btrace/delta.exp * gdb.btrace/dlopen.exp * gdb.btrace/enable.exp * gdb.btrace/exception.exp * gdb.btrace/function_call_history.exp * gdb.btrace/gcore.exp * gdb.btrace/instruction_history.exp * gdb.btrace/nohist.exp * gdb.btrace/reconnect.exp * gdb.btrace/record_goto-step.exp * gdb.btrace/record_goto.exp * gdb.btrace/rn-dl-bind.exp * gdb.btrace/segv.exp * gdb.btrace/step.exp * gdb.btrace/stepi.exp * gdb.btrace/tailcall-only.exp * gdb.btrace/tailcall.exp * gdb.btrace/tsx.exp * gdb.btrace/unknown_functions.exp * gdb.btrace/vdso.exp * gdb.compile/compile-ifunc.exp * gdb.compile/compile-ops.exp * gdb.compile/compile-print.exp * gdb.compile/compile-setjmp.exp * gdb.cp/abstract-origin.exp * gdb.cp/ambiguous.exp * gdb.cp/annota2.exp * gdb.cp/annota3.exp * gdb.cp/anon-ns.exp * gdb.cp/anon-struct.exp * gdb.cp/anon-union.exp * gdb.cp/arg-reference.exp * gdb.cp/baseenum.exp * gdb.cp/bool.exp * gdb.cp/breakpoint.exp * gdb.cp/bs15503.exp * gdb.cp/call-c.exp * gdb.cp/casts.exp * gdb.cp/chained-calls.exp * gdb.cp/class2.exp * gdb.cp/classes.exp * gdb.cp/cmpd-minsyms.exp * gdb.cp/converts.exp * gdb.cp/cp-relocate.exp * gdb.cp/cpcompletion.exp * gdb.cp/cpexprs.exp * gdb.cp/cplabel.exp * gdb.cp/cplusfuncs.exp * gdb.cp/cpsizeof.exp * gdb.cp/ctti.exp * gdb.cp/derivation.exp * gdb.cp/destrprint.exp * gdb.cp/dispcxx.exp * gdb.cp/enum-class.exp * gdb.cp/exception.exp * gdb.cp/exceptprint.exp * gdb.cp/expand-psymtabs-cxx.exp * gdb.cp/expand-sals.exp * gdb.cp/extern-c.exp * gdb.cp/filename.exp * gdb.cp/formatted-ref.exp * gdb.cp/fpointer.exp * gdb.cp/gdb1355.exp * gdb.cp/gdb2495.exp * gdb.cp/hang.exp * gdb.cp/impl-this.exp * gdb.cp/infcall-dlopen.exp * gdb.cp/inherit.exp * gdb.cp/iostream.exp * gdb.cp/koenig.exp * gdb.cp/local.exp * gdb.cp/m-data.exp * gdb.cp/m-static.exp * gdb.cp/mb-ctor.exp * gdb.cp/mb-inline.exp * gdb.cp/mb-templates.exp * gdb.cp/member-name.exp * gdb.cp/member-ptr.exp * gdb.cp/meth-typedefs.exp * gdb.cp/method.exp * gdb.cp/method2.exp * gdb.cp/minsym-fallback.exp * gdb.cp/misc.exp * gdb.cp/namelessclass.exp * gdb.cp/namespace-enum.exp * gdb.cp/namespace-nested-import.exp * gdb.cp/namespace.exp * gdb.cp/nextoverthrow.exp * gdb.cp/no-dmgl-verbose.exp * gdb.cp/non-trivial-retval.exp * gdb.cp/noparam.exp * gdb.cp/nsdecl.exp * gdb.cp/nsimport.exp * gdb.cp/nsnested.exp * gdb.cp/nsnoimports.exp * gdb.cp/nsrecurs.exp * gdb.cp/nsstress.exp * gdb.cp/nsusing.exp * gdb.cp/operator.exp * gdb.cp/oranking.exp * gdb.cp/overload-const.exp * gdb.cp/overload.exp * gdb.cp/ovldbreak.exp * gdb.cp/ovsrch.exp * gdb.cp/paren-type.exp * gdb.cp/parse-lang.exp * gdb.cp/pass-by-ref.exp * gdb.cp/pr-1023.exp * gdb.cp/pr-1210.exp * gdb.cp/pr-574.exp * gdb.cp/pr10687.exp * gdb.cp/pr12028.exp * gdb.cp/pr17132.exp * gdb.cp/pr17494.exp * gdb.cp/pr9067.exp * gdb.cp/pr9167.exp * gdb.cp/pr9631.exp * gdb.cp/printmethod.exp * gdb.cp/psmang.exp * gdb.cp/psymtab-parameter.exp * gdb.cp/ptype-cv-cp.exp * gdb.cp/ptype-flags.exp * gdb.cp/re-set-overloaded.exp * gdb.cp/ref-types.exp * gdb.cp/rtti.exp * gdb.cp/scope-err.exp * gdb.cp/shadow.exp * gdb.cp/smartp.exp * gdb.cp/static-method.exp * gdb.cp/static-print-quit.exp * gdb.cp/temargs.exp * gdb.cp/templates.exp * gdb.cp/try_catch.exp * gdb.cp/typedef-operator.exp * gdb.cp/typeid.exp * gdb.cp/userdef.exp * gdb.cp/using-crash.exp * gdb.cp/var-tag.exp * gdb.cp/virtbase.exp * gdb.cp/virtfunc.exp * gdb.cp/virtfunc2.exp * gdb.cp/vla-cxx.exp * gdb.disasm/t01_mov.exp * gdb.disasm/t02_mova.exp * gdb.disasm/t03_add.exp * gdb.disasm/t04_sub.exp * gdb.disasm/t05_cmp.exp * gdb.disasm/t06_ari2.exp * gdb.disasm/t07_ari3.exp * gdb.disasm/t08_or.exp * gdb.disasm/t09_xor.exp * gdb.disasm/t10_and.exp * gdb.disasm/t11_logs.exp * gdb.disasm/t12_bit.exp * gdb.disasm/t13_otr.exp * gdb.dlang/circular.exp * gdb.dwarf2/arr-stride.exp * gdb.dwarf2/arr-subrange.exp * gdb.dwarf2/atomic-type.exp * gdb.dwarf2/bad-regnum.exp * gdb.dwarf2/bitfield-parent-optimized-out.exp * gdb.dwarf2/callframecfa.exp * gdb.dwarf2/clztest.exp * gdb.dwarf2/corrupt.exp * gdb.dwarf2/data-loc.exp * gdb.dwarf2/dup-psym.exp * gdb.dwarf2/dw2-anon-mptr.exp * gdb.dwarf2/dw2-anonymous-func.exp * gdb.dwarf2/dw2-bad-mips-linkage-name.exp * gdb.dwarf2/dw2-bad-unresolved.exp * gdb.dwarf2/dw2-basic.exp * gdb.dwarf2/dw2-canonicalize-type.exp * gdb.dwarf2/dw2-case-insensitive.exp * gdb.dwarf2/dw2-common-block.exp * gdb.dwarf2/dw2-compdir-oldgcc.exp * gdb.dwarf2/dw2-compressed.exp * gdb.dwarf2/dw2-const.exp * gdb.dwarf2/dw2-cp-infcall-ref-static.exp * gdb.dwarf2/dw2-cu-size.exp * gdb.dwarf2/dw2-dup-frame.exp * gdb.dwarf2/dw2-entry-value.exp * gdb.dwarf2/dw2-icycle.exp * gdb.dwarf2/dw2-ifort-parameter.exp * gdb.dwarf2/dw2-inline-break.exp * gdb.dwarf2/dw2-inline-param.exp * gdb.dwarf2/dw2-intercu.exp * gdb.dwarf2/dw2-intermix.exp * gdb.dwarf2/dw2-lexical-block-bare.exp * gdb.dwarf2/dw2-linkage-name-trust.exp * gdb.dwarf2/dw2-minsym-in-cu.exp * gdb.dwarf2/dw2-noloc.exp * gdb.dwarf2/dw2-op-call.exp * gdb.dwarf2/dw2-op-out-param.exp * gdb.dwarf2/dw2-opt-structptr.exp * gdb.dwarf2/dw2-param-error.exp * gdb.dwarf2/dw2-producer.exp * gdb.dwarf2/dw2-ranges-base.exp * gdb.dwarf2/dw2-ref-missing-frame.exp * gdb.dwarf2/dw2-reg-undefined.exp * gdb.dwarf2/dw2-regno-invalid.exp * gdb.dwarf2/dw2-restore.exp * gdb.dwarf2/dw2-restrict.exp * gdb.dwarf2/dw2-single-line-discriminators.exp * gdb.dwarf2/dw2-strp.exp * gdb.dwarf2/dw2-undefined-ret-addr.exp * gdb.dwarf2/dw2-unresolved.exp * gdb.dwarf2/dw2-var-zero-addr.exp * gdb.dwarf2/dw4-sig-types.exp * gdb.dwarf2/dwz.exp * gdb.dwarf2/dynarr-ptr.exp * gdb.dwarf2/enum-type.exp * gdb.dwarf2/gdb-index.exp * gdb.dwarf2/implptr-64bit.exp * gdb.dwarf2/implptr-optimized-out.exp * gdb.dwarf2/implptr.exp * gdb.dwarf2/implref-array.exp * gdb.dwarf2/implref-const.exp * gdb.dwarf2/implref-global.exp * gdb.dwarf2/implref-struct.exp * gdb.dwarf2/mac-fileno.exp * gdb.dwarf2/main-subprogram.exp * gdb.dwarf2/member-ptr-forwardref.exp * gdb.dwarf2/method-ptr.exp * gdb.dwarf2/missing-sig-type.exp * gdb.dwarf2/nonvar-access.exp * gdb.dwarf2/opaque-type-lookup.exp * gdb.dwarf2/pieces-optimized-out.exp * gdb.dwarf2/pieces.exp * gdb.dwarf2/pr10770.exp * gdb.dwarf2/pr13961.exp * gdb.dwarf2/staticvirtual.exp * gdb.dwarf2/subrange.exp * gdb.dwarf2/symtab-producer.exp * gdb.dwarf2/trace-crash.exp * gdb.dwarf2/typeddwarf.exp * gdb.dwarf2/valop.exp * gdb.dwarf2/watch-notconst.exp * gdb.fortran/array-element.exp * gdb.fortran/charset.exp * gdb.fortran/common-block.exp * gdb.fortran/complex.exp * gdb.fortran/derived-type-function.exp * gdb.fortran/derived-type.exp * gdb.fortran/logical.exp * gdb.fortran/module.exp * gdb.fortran/multi-dim.exp * gdb.fortran/nested-funcs.exp * gdb.fortran/print-formatted.exp * gdb.fortran/subarray.exp * gdb.fortran/vla-alloc-assoc.exp * gdb.fortran/vla-datatypes.exp * gdb.fortran/vla-history.exp * gdb.fortran/vla-ptr-info.exp * gdb.fortran/vla-ptype-sub.exp * gdb.fortran/vla-ptype.exp * gdb.fortran/vla-sizeof.exp * gdb.fortran/vla-type.exp * gdb.fortran/vla-value-sub-arbitrary.exp * gdb.fortran/vla-value-sub-finish.exp * gdb.fortran/vla-value-sub.exp * gdb.fortran/vla-value.exp * gdb.fortran/whatis_type.exp * gdb.go/chan.exp * gdb.go/handcall.exp * gdb.go/hello.exp * gdb.go/integers.exp * gdb.go/methods.exp * gdb.go/package.exp * gdb.go/strings.exp * gdb.go/types.exp * gdb.go/unsafe.exp * gdb.guile/scm-arch.exp * gdb.guile/scm-block.exp * gdb.guile/scm-breakpoint.exp * gdb.guile/scm-cmd.exp * gdb.guile/scm-disasm.exp * gdb.guile/scm-equal.exp * gdb.guile/scm-frame-args.exp * gdb.guile/scm-frame-inline.exp * gdb.guile/scm-frame.exp * gdb.guile/scm-iterator.exp * gdb.guile/scm-math.exp * gdb.guile/scm-objfile.exp * gdb.guile/scm-ports.exp * gdb.guile/scm-symbol.exp * gdb.guile/scm-symtab.exp * gdb.guile/scm-value-cc.exp * gdb.guile/types-module.exp * gdb.linespec/break-ask.exp * gdb.linespec/cpexplicit.exp * gdb.linespec/explicit.exp * gdb.linespec/keywords.exp * gdb.linespec/linespec.exp * gdb.linespec/ls-dollar.exp * gdb.linespec/ls-errs.exp * gdb.linespec/skip-two.exp * gdb.linespec/thread.exp * gdb.mi/mi-async.exp * gdb.mi/mi-basics.exp * gdb.mi/mi-break.exp * gdb.mi/mi-catch-load.exp * gdb.mi/mi-cli.exp * gdb.mi/mi-cmd-param-changed.exp * gdb.mi/mi-console.exp * gdb.mi/mi-detach.exp * gdb.mi/mi-disassemble.exp * gdb.mi/mi-eval.exp * gdb.mi/mi-file-transfer.exp * gdb.mi/mi-file.exp * gdb.mi/mi-fill-memory.exp * gdb.mi/mi-inheritance-syntax-error.exp * gdb.mi/mi-linespec-err-cp.exp * gdb.mi/mi-logging.exp * gdb.mi/mi-memory-changed.exp * gdb.mi/mi-read-memory.exp * gdb.mi/mi-record-changed.exp * gdb.mi/mi-reg-undefined.exp * gdb.mi/mi-regs.exp * gdb.mi/mi-return.exp * gdb.mi/mi-reverse.exp * gdb.mi/mi-simplerun.exp * gdb.mi/mi-solib.exp * gdb.mi/mi-stack.exp * gdb.mi/mi-stepi.exp * gdb.mi/mi-syn-frame.exp * gdb.mi/mi-until.exp * gdb.mi/mi-var-block.exp * gdb.mi/mi-var-child.exp * gdb.mi/mi-var-cmd.exp * gdb.mi/mi-var-cp.exp * gdb.mi/mi-var-display.exp * gdb.mi/mi-var-invalidate.exp * gdb.mi/mi-var-list-children-invalid-grandchild.exp * gdb.mi/mi-vla-fortran.exp * gdb.mi/mi-watch.exp * gdb.mi/mi2-var-child.exp * gdb.mi/user-selected-context-sync.exp * gdb.modula2/unbounded-array.exp * gdb.multi/dummy-frame-restore.exp * gdb.multi/multi-arch-exec.exp * gdb.multi/multi-arch.exp * gdb.multi/tids.exp * gdb.multi/watchpoint-multi.exp * gdb.opencl/callfuncs.exp * gdb.opencl/convs_casts.exp * gdb.opencl/datatypes.exp * gdb.opencl/operators.exp * gdb.opencl/vec_comps.exp * gdb.opt/clobbered-registers-O2.exp * gdb.opt/inline-break.exp * gdb.opt/inline-bt.exp * gdb.opt/inline-cmds.exp * gdb.opt/inline-locals.exp * gdb.pascal/case-insensitive-symbols.exp * gdb.pascal/floats.exp * gdb.pascal/gdb11492.exp * gdb.python/lib-types.exp * gdb.python/py-arch.exp * gdb.python/py-as-string.exp * gdb.python/py-bad-printers.exp * gdb.python/py-block.exp * gdb.python/py-breakpoint-create-fail.exp * gdb.python/py-breakpoint.exp * gdb.python/py-caller-is.exp * gdb.python/py-cmd.exp * gdb.python/py-explore-cc.exp * gdb.python/py-explore.exp * gdb.python/py-finish-breakpoint.exp * gdb.python/py-finish-breakpoint2.exp * gdb.python/py-frame-args.exp * gdb.python/py-frame-inline.exp * gdb.python/py-frame.exp * gdb.python/py-framefilter-mi.exp * gdb.python/py-infthread.exp * gdb.python/py-lazy-string.exp * gdb.python/py-linetable.exp * gdb.python/py-mi-events.exp * gdb.python/py-mi-objfile.exp * gdb.python/py-mi.exp * gdb.python/py-objfile.exp * gdb.python/py-pp-integral.exp * gdb.python/py-pp-maint.exp * gdb.python/py-pp-re-notag.exp * gdb.python/py-pp-registration.exp * gdb.python/py-recurse-unwind.exp * gdb.python/py-strfns.exp * gdb.python/py-symbol.exp * gdb.python/py-symtab.exp * gdb.python/py-sync-interp.exp * gdb.python/py-typeprint.exp * gdb.python/py-unwind-maint.exp * gdb.python/py-unwind.exp * gdb.python/py-value-cc.exp * gdb.python/py-xmethods.exp * gdb.reverse/amd64-tailcall-reverse.exp * gdb.reverse/break-precsave.exp * gdb.reverse/break-reverse.exp * gdb.reverse/consecutive-precsave.exp * gdb.reverse/consecutive-reverse.exp * gdb.reverse/finish-precsave.exp * gdb.reverse/finish-reverse-bkpt.exp * gdb.reverse/finish-reverse.exp * gdb.reverse/fstatat-reverse.exp * gdb.reverse/getresuid-reverse.exp * gdb.reverse/i386-precsave.exp * gdb.reverse/i386-reverse.exp * gdb.reverse/i386-sse-reverse.exp * gdb.reverse/i387-env-reverse.exp * gdb.reverse/i387-stack-reverse.exp * gdb.reverse/insn-reverse.exp * gdb.reverse/machinestate-precsave.exp * gdb.reverse/machinestate.exp * gdb.reverse/next-reverse-bkpt-over-sr.exp * gdb.reverse/pipe-reverse.exp * gdb.reverse/readv-reverse.exp * gdb.reverse/recvmsg-reverse.exp * gdb.reverse/rerun-prec.exp * gdb.reverse/s390-mvcle.exp * gdb.reverse/step-precsave.exp * gdb.reverse/step-reverse.exp * gdb.reverse/time-reverse.exp * gdb.reverse/until-precsave.exp * gdb.reverse/until-reverse.exp * gdb.reverse/waitpid-reverse.exp * gdb.reverse/watch-precsave.exp * gdb.reverse/watch-reverse.exp * gdb.rust/generics.exp * gdb.rust/methods.exp * gdb.rust/modules.exp * gdb.rust/simple.exp * gdb.server/connect-with-no-symbol-file.exp * gdb.server/ext-attach.exp * gdb.server/ext-restart.exp * gdb.server/ext-wrapper.exp * gdb.server/file-transfer.exp * gdb.server/server-exec-info.exp * gdb.server/server-kill.exp * gdb.server/server-mon.exp * gdb.server/wrapper.exp * gdb.stabs/exclfwd.exp * gdb.stabs/gdb11479.exp * gdb.threads/clone-new-thread-event.exp * gdb.threads/corethreads.exp * gdb.threads/current-lwp-dead.exp * gdb.threads/dlopen-libpthread.exp * gdb.threads/gcore-thread.exp * gdb.threads/sigstep-threads.exp * gdb.threads/watchpoint-fork.exp * gdb.trace/actions-changed.exp * gdb.trace/backtrace.exp * gdb.trace/change-loc.exp * gdb.trace/circ.exp * gdb.trace/collection.exp * gdb.trace/disconnected-tracing.exp * gdb.trace/ftrace.exp * gdb.trace/mi-trace-frame-collected.exp * gdb.trace/mi-trace-unavailable.exp * gdb.trace/mi-traceframe-changed.exp * gdb.trace/mi-tsv-changed.exp * gdb.trace/no-attach-trace.exp * gdb.trace/passc-dyn.exp * gdb.trace/qtro.exp * gdb.trace/range-stepping.exp * gdb.trace/read-memory.exp * gdb.trace/save-trace.exp * gdb.trace/signal.exp * gdb.trace/status-stop.exp * gdb.trace/tfile.exp * gdb.trace/trace-break.exp * gdb.trace/trace-buffer-size.exp * gdb.trace/trace-condition.exp * gdb.trace/tracefile-pseudo-reg.exp * gdb.trace/tstatus.exp * gdb.trace/unavailable.exp * gdb.trace/while-dyn.exp * gdb.trace/while-stepping.exp
2016-12-01Fix test names starting with uppercase output by basic functionsLuis Machado
The following patch is based on the previous patch i sent and handles cases of test names that start with an uppercase letter. Test names should start with lowercase unless it starts with the name of a technology, architecture, ISA etc. This first patch addresses cases of test names output explicitly via xfail, kfail, kpass, fail, pass, unsupported, untested and also names set with the pattern "set test" and "set testname". gdb/testsuite/ChangeLog: 2016-12-01 Luis Machado <lgustavo@codesourcery.com> Fix test names starting with uppercase throughout all the files below. * gdb.ada/array_return.exp * gdb.ada/catch_ex.exp * gdb.ada/info_exc.exp * gdb.ada/mi_catch_ex.exp * gdb.ada/mi_dyn_arr.exp * gdb.ada/mi_ex_cond.exp * gdb.ada/mi_exc_info.exp * gdb.ada/mi_interface.exp * gdb.ada/mi_task_arg.exp * gdb.ada/mi_task_info.exp * gdb.ada/mi_var_array.exp * gdb.arch/alpha-step.exp * gdb.arch/amd64-disp-step.exp * gdb.arch/arm-disp-step.exp * gdb.arch/disp-step-insn-reloc.exp * gdb.arch/e500-prologue.exp * gdb.arch/ftrace-insn-reloc.exp * gdb.arch/gdb1558.exp * gdb.arch/i386-bp_permanent.exp * gdb.arch/i386-disp-step.exp * gdb.arch/i386-float.exp * gdb.arch/i386-gnu-cfi.exp * gdb.arch/ia64-breakpoint-shadow.exp * gdb.arch/mips16-thunks.exp * gdb.arch/pa-nullify.exp * gdb.arch/powerpc-aix-prologue.exp * gdb.arch/powerpc-power.exp * gdb.arch/ppc-dfp.exp * gdb.arch/s390-tdbregs.exp * gdb.arch/spu-info.exp * gdb.arch/spu-ls.exp * gdb.arch/thumb-bx-pc.exp * gdb.base/advance.exp * gdb.base/annota-input-while-running.exp * gdb.base/arrayidx.exp * gdb.base/asmlabel.exp * gdb.base/async.exp * gdb.base/attach-wait-input.exp * gdb.base/auto-connect-native-target.exp * gdb.base/batch-preserve-term-settings.exp * gdb.base/bfp-test.exp * gdb.base/bigcore.exp * gdb.base/bp-permanent.exp * gdb.base/break-always.exp * gdb.base/break-fun-addr.exp * gdb.base/break-idempotent.exp * gdb.base/break-main-file-remove-fail.exp * gdb.base/break-probes.exp * gdb.base/break-unload-file.exp * gdb.base/break.exp * gdb.base/call-ar-st.exp * gdb.base/call-rt-st.exp * gdb.base/call-sc.exp * gdb.base/call-signal-resume.exp * gdb.base/call-strs.exp * gdb.base/callexit.exp * gdb.base/callfuncs.exp * gdb.base/catch-gdb-caused-signals.exp * gdb.base/catch-signal-siginfo-cond.exp * gdb.base/catch-syscall.exp * gdb.base/compare-sections.exp * gdb.base/cond-eval-mode.exp * gdb.base/condbreak-call-false.exp * gdb.base/consecutive-step-over.exp * gdb.base/cursal.exp * gdb.base/disabled-location.exp * gdb.base/disasm-end-cu.exp * gdb.base/display.exp * gdb.base/double-prompt-target-event-error.exp * gdb.base/dprintf-bp-same-addr.exp * gdb.base/dprintf-detach.exp * gdb.base/dprintf-next.exp * gdb.base/dprintf-non-stop.exp * gdb.base/dprintf-pending.exp * gdb.base/dso2dso.exp * gdb.base/ending-run.exp * gdb.base/enum_cond.exp * gdb.base/examine-backward.exp * gdb.base/exe-lock.exp * gdb.base/exec-invalid-sysroot.exp * gdb.base/execl-update-breakpoints.exp * gdb.base/execution-termios.exp * gdb.base/fileio.exp * gdb.base/fixsection.exp * gdb.base/foll-exec-mode.exp * gdb.base/foll-exec.exp * gdb.base/fork-running-state.exp * gdb.base/frame-args.exp * gdb.base/fullpath-expand.exp * gdb.base/func-ptr.exp * gdb.base/gcore-relro-pie.exp * gdb.base/gdb1090.exp * gdb.base/gdb1555.exp * gdb.base/global-var-nested-by-dso.exp * gdb.base/gnu-ifunc.exp * gdb.base/hbreak-in-shr-unsupported.exp * gdb.base/hbreak-unmapped.exp * gdb.base/hook-stop.exp * gdb.base/infcall-input.exp * gdb.base/info-fun.exp * gdb.base/info-shared.exp * gdb.base/interrupt-noterm.exp * gdb.base/jit-so.exp * gdb.base/jit.exp * gdb.base/line-symtabs.exp * gdb.base/list.exp * gdb.base/longjmp.exp * gdb.base/macscp.exp * gdb.base/max-value-size.exp * gdb.base/nodebug.exp * gdb.base/nofield.exp * gdb.base/overlays.exp * gdb.base/paginate-after-ctrl-c-running.exp * gdb.base/paginate-bg-execution.exp * gdb.base/paginate-inferior-exit.exp * gdb.base/pending.exp * gdb.base/pr11022.exp * gdb.base/printcmds.exp * gdb.base/ptr-typedef.exp * gdb.base/ptype.exp * gdb.base/randomize.exp * gdb.base/range-stepping.exp * gdb.base/realname-expand.exp * gdb.base/relativedebug.exp * gdb.base/remote.exp * gdb.base/savedregs.exp * gdb.base/sepdebug.exp * gdb.base/set-noassign.exp * gdb.base/shlib-call.exp * gdb.base/shreloc.exp * gdb.base/sigaltstack.exp * gdb.base/sigbpt.exp * gdb.base/siginfo-addr.exp * gdb.base/siginfo-obj.exp * gdb.base/siginfo-thread.exp * gdb.base/signest.exp * gdb.base/signull.exp * gdb.base/sigrepeat.exp * gdb.base/skip.exp * gdb.base/so-impl-ld.exp * gdb.base/solib-corrupted.exp * gdb.base/solib-disc.exp * gdb.base/solib-display.exp * gdb.base/solib-overlap.exp * gdb.base/solib-search.exp * gdb.base/solib-symbol.exp * gdb.base/source-execution.exp * gdb.base/sss-bp-on-user-bp-2.exp * gdb.base/sss-bp-on-user-bp.exp * gdb.base/stack-checking.exp * gdb.base/stale-infcall.exp * gdb.base/step-break.exp * gdb.base/step-line.exp * gdb.base/step-over-exit.exp * gdb.base/step-test.exp * gdb.base/structs.exp * gdb.base/sym-file.exp * gdb.base/symtab-search-order.exp * gdb.base/term.exp * gdb.base/type-opaque.exp * gdb.base/unload.exp * gdb.base/until-nodebug.exp * gdb.base/until.exp * gdb.base/unwindonsignal.exp * gdb.base/watch-cond.exp * gdb.base/watch-non-mem.exp * gdb.base/watch_thread_num.exp * gdb.base/watchpoint-reuse-slot.exp * gdb.base/watchpoint-solib.exp * gdb.base/watchpoint.exp * gdb.btrace/dlopen.exp * gdb.cell/arch.exp * gdb.cell/break.exp * gdb.cell/bt.exp * gdb.cell/core.exp * gdb.cell/data.exp * gdb.cell/dwarfaddr.exp * gdb.cell/ea-cache.exp * gdb.cell/ea-standalone.exp * gdb.cell/ea-test.exp * gdb.cell/f-regs.exp * gdb.cell/fork.exp * gdb.cell/gcore.exp * gdb.cell/mem-access.exp * gdb.cell/ptype.exp * gdb.cell/registers.exp * gdb.cell/sizeof.exp * gdb.cell/solib-symbol.exp * gdb.cell/solib.exp * gdb.compile/compile-tls.exp * gdb.cp/exception.exp * gdb.cp/gdb2495.exp * gdb.cp/local.exp * gdb.cp/mb-inline.exp * gdb.cp/mb-templates.exp * gdb.cp/pr10687.exp * gdb.cp/pr9167.exp * gdb.cp/scope-err.exp * gdb.cp/templates.exp * gdb.cp/virtfunc.exp * gdb.dwarf2/dw2-dir-file-name.exp * gdb.dwarf2/dw2-single-line-discriminators.exp * gdb.fortran/complex.exp * gdb.fortran/library-module.exp * gdb.guile/guile.exp * gdb.guile/scm-cmd.exp * gdb.guile/scm-frame-inline.exp * gdb.guile/scm-objfile.exp * gdb.guile/scm-pretty-print.exp * gdb.guile/scm-symbol.exp * gdb.guile/scm-type.exp * gdb.guile/scm-value.exp * gdb.linespec/keywords.exp * gdb.linespec/ls-errs.exp * gdb.linespec/macro-relative.exp * gdb.linespec/thread.exp * gdb.mi/mi-breakpoint-changed.exp * gdb.mi/mi-dprintf-pending.exp * gdb.mi/mi-fullname-deleted.exp * gdb.mi/mi-logging.exp * gdb.mi/mi-pending.exp * gdb.mi/mi-solib.exp * gdb.mi/new-ui-mi-sync.exp * gdb.mi/user-selected-context-sync.exp * gdb.multi/dummy-frame-restore.exp * gdb.multi/multi-arch-exec.exp * gdb.multi/remove-inferiors.exp * gdb.multi/watchpoint-multi-exit.exp * gdb.opt/solib-intra-step.exp * gdb.perf/backtrace.exp * gdb.perf/single-step.exp * gdb.perf/skip-command.exp * gdb.perf/skip-prologue.exp * gdb.perf/solib.exp * gdb.python/lib-types.exp * gdb.python/py-as-string.exp * gdb.python/py-bad-printers.exp * gdb.python/py-block.exp * gdb.python/py-breakpoint.exp * gdb.python/py-cmd.exp * gdb.python/py-events.exp * gdb.python/py-evthreads.exp * gdb.python/py-finish-breakpoint.exp * gdb.python/py-finish-breakpoint2.exp * gdb.python/py-frame-inline.exp * gdb.python/py-frame.exp * gdb.python/py-inferior.exp * gdb.python/py-infthread.exp * gdb.python/py-mi.exp * gdb.python/py-objfile.exp * gdb.python/py-pp-maint.exp * gdb.python/py-pp-registration.exp * gdb.python/py-prettyprint.exp * gdb.python/py-recurse-unwind.exp * gdb.python/py-shared.exp * gdb.python/py-symbol.exp * gdb.python/py-symtab.exp * gdb.python/py-template.exp * gdb.python/py-type.exp * gdb.python/py-unwind-maint.exp * gdb.python/py-unwind.exp * gdb.python/py-value.exp * gdb.python/python.exp * gdb.reverse/finish-reverse-bkpt.exp * gdb.reverse/insn-reverse.exp * gdb.reverse/next-reverse-bkpt-over-sr.exp * gdb.reverse/solib-precsave.exp * gdb.reverse/solib-reverse.exp * gdb.stabs/gdb11479.exp * gdb.stabs/weird.exp * gdb.threads/fork-child-threads.exp * gdb.threads/fork-plus-threads.exp * gdb.threads/fork-thread-pending.exp * gdb.threads/forking-threads-plus-breakpoint.exp * gdb.threads/hand-call-in-threads.exp * gdb.threads/interrupted-hand-call.exp * gdb.threads/linux-dp.exp * gdb.threads/local-watch-wrong-thread.exp * gdb.threads/next-while-other-thread-longjmps.exp * gdb.threads/non-ldr-exit.exp * gdb.threads/pending-step.exp * gdb.threads/print-threads.exp * gdb.threads/process-dies-while-detaching.exp * gdb.threads/process-dies-while-handling-bp.exp * gdb.threads/pthreads.exp * gdb.threads/queue-signal.exp * gdb.threads/reconnect-signal.exp * gdb.threads/signal-command-handle-nopass.exp * gdb.threads/signal-command-multiple-signals-pending.exp * gdb.threads/signal-delivered-right-thread.exp * gdb.threads/signal-sigtrap.exp * gdb.threads/sigthread.exp * gdb.threads/staticthreads.exp * gdb.threads/stepi-random-signal.exp * gdb.threads/thread-unwindonsignal.exp * gdb.threads/thread_check.exp * gdb.threads/thread_events.exp * gdb.threads/tid-reuse.exp * gdb.threads/tls-nodebug.exp * gdb.threads/tls-shared.exp * gdb.threads/tls-so_extern.exp * gdb.threads/tls.exp * gdb.threads/wp-replication.exp * gdb.trace/actions-changed.exp * gdb.trace/actions.exp * gdb.trace/backtrace.exp * gdb.trace/change-loc.exp * gdb.trace/collection.exp * gdb.trace/deltrace.exp * gdb.trace/disconnected-tracing.exp * gdb.trace/entry-values.exp * gdb.trace/ftrace-lock.exp * gdb.trace/ftrace.exp * gdb.trace/infotrace.exp * gdb.trace/mi-trace-frame-collected.exp * gdb.trace/mi-trace-unavailable.exp * gdb.trace/mi-traceframe-changed.exp * gdb.trace/mi-tracepoint-changed.exp * gdb.trace/mi-tsv-changed.exp * gdb.trace/no-attach-trace.exp * gdb.trace/packetlen.exp * gdb.trace/passc-dyn.exp * gdb.trace/passcount.exp * gdb.trace/pending.exp * gdb.trace/pr16508.exp * gdb.trace/qtro.exp * gdb.trace/range-stepping.exp * gdb.trace/read-memory.exp * gdb.trace/report.exp * gdb.trace/save-trace.exp * gdb.trace/signal.exp * gdb.trace/stap-trace.exp * gdb.trace/status-stop.exp * gdb.trace/strace.exp * gdb.trace/tfile.exp * gdb.trace/tfind.exp * gdb.trace/trace-break.exp * gdb.trace/trace-condition.exp * gdb.trace/trace-enable-disable.exp * gdb.trace/trace-mt.exp * gdb.trace/tracecmd.exp * gdb.trace/tracefile-pseudo-reg.exp * gdb.trace/tspeed.exp * gdb.trace/tstatus.exp * gdb.trace/tsv.exp * gdb.trace/unavailable.exp * gdb.trace/while-dyn.exp * gdb.trace/while-stepping.exp * lib/gdb-guile.exp * lib/gdb.exp * lib/mi-support.exp * lib/pascal.exp * lib/perftest.exp * lib/prelink-support.exp * lib/selftest-support.exp
2016-07-23Implement catch syscall groupGabriel Krisman Bertazi
Implement support to add catchpoints for a group of related syscalls using the syntax: (gdb) catch syscall group:<group> or (gdb) catch syscall g:<group> Several groups are predefined in the xml files for all architectures supported by GDB over Linux. They are based on the groups defined by strace. gdb/ * xml-syscall.c (get_syscalls_by_group): New. (get_syscall_group_names): New. (struct syscall_group_desc): New structure to store group data. (struct syscalls_info): Include field to store the group list. (sysinfo_free_syscall_group_desc): New. (free_syscalls_info): Free group list. (syscall_group_create_syscall_group_desc): New. (syscall_group_add_syscall): New. (syscall_create_syscall_desc): Add syscall to its groups. (syscall_start_syscall): Load group attribute. (syscall_group_get_group_by_name): New. (xml_list_syscalls_by_group): New. (xml_list_of_groups): New. * xml-syscall.h (get_syscalls_by_group): Export function to retrieve a list of syscalls filtered by the group name. (get_syscall_group_names): Export function to retrieve the list of syscall groups. * break-catch-syscall.c (catch_syscall_split_args): Verify if argument is a syscall group and expand it to a list of syscalls when creating catchpoints. (catch_syscall_completer): Add word completion for system call groups. * configure.ac: Include dependency for xsltproc when building in maintainer-mode. * break-catch-syscall.c (_initialize_breakpoint): Update catch syscall command documentation. * NEWS: Include section about catching groups of syscalls. * configure: Regenerate. * data-directory/Makefile.in: Generate syscall xml when building in maintainer mode. * syscalls/gdb-syscalls.dtd: Include group attribute to the syscall element. * syscalls/apply-defaults.xsl: New. * syscalls/linux-defaults.xml.in: New. * syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in. * syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in. * syscalls/arm-linux.xml: Rename to arm-linux.xml.in. * syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in. * syscalls/i386-linux.xml: Rename to i386-linux.xml.in. * syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in. * syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in. * syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in. * syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in. * syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in. * syscalls/s390-linux.xml: Rename to s390-linux.xml.in. * syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in. * syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in. * syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in. * syscalls/aarch64-linux.xml: Regenerate. * syscalls/amd64-linux.xml: Regenerate. * syscalls/arm-linux.xml: Regenerate. * syscalls/i386-linux.xml: Regenerate. * syscalls/mips-n32-linux.xml: Regenerate. * syscalls/mips-n64-linux.xml: Regenerate. * syscalls/mips-o32-linux.xml: Regenerate. * syscalls/ppc-linux.xml: Regenerate. * syscalls/ppc64-linux.xml: Regenerate. * syscalls/s390-linux.xml: Regenerate. * syscalls/s390x-linux.xml: Regenerate. * syscalls/sparc-linux.xml: Regenerate. * syscalls/sparc64-linux.xml: Regenerate. gdb/testsuite/ * gdb.base/catch-syscall.exp (do_syscall_tests): Add call to test_catch_syscall_group. (test_catch_syscall_group): New. gdb/doc/ * gdb.texinfo (Set Catchpoints): Add 'group' argument to catch syscall.
2016-06-28Probe catch syscall supportYao Qi
In 82075af2c14b1f8a54fa5796fb63f7ef23f98d9d (Implement 'catch syscall' for gdbserver), only x86 is supported, but the test can still be run on other linux targets, like aarch64 and ppc, with native-gdbserver. This causes many new fails. This patch removes the check on isnative and on target triplets. Instead, we can insert catch point, and resume the program to see whether catch syscall is supported or not. gdb/testsuite: 2016-06-28 Yao Qi <yao.qi@linaro.org> * gdb.base/catch-syscall.exp: Remove check on isnative and target triplets. Start gdb, execute catch syscall, and continue. Check gdb's output to determine catch syscall is supported.
2016-01-12Implement 'catch syscall' for gdbserverJosh Stone
This adds a new QCatchSyscalls packet to enable 'catch syscall', and new stop reasons "syscall_entry" and "syscall_return" for those events. It is currently only supported on Linux x86 and x86_64. gdb/ChangeLog: 2016-01-12 Josh Stone <jistone@redhat.com> Philippe Waroquiers <philippe.waroquiers@skynet.be> * NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the syscall_entry and syscall_return stop reasons. Mention GDB support for remote catch syscall. * remote.c (PACKET_QCatchSyscalls): New enum. (remote_set_syscall_catchpoint): New function. (remote_protocol_features): New element for QCatchSyscalls. (remote_parse_stop_reply): Parse syscall_entry/return stops. (init_remote_ops): Install remote_set_syscall_catchpoint. (_initialize_remote): Config QCatchSyscalls. * linux-nat.h (struct lwp_info) <syscall_state>: Comment typo. gdb/doc/ChangeLog: 2016-01-12 Josh Stone <jistone@redhat.com> Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet. (Stop Reply Packets): List the syscall entry and return stop reasons. (General Query Packets): Describe QCatchSyscalls, and add it to the table and the detailed list of stub features. gdb/gdbserver/ChangeLog: 2016-01-12 Josh Stone <jistone@redhat.com> Philippe Waroquiers <philippe.waroquiers@skynet.be> * inferiors.h: Include "gdb_vecs.h". (struct process_info): Add syscalls_to_catch. * inferiors.c (remove_process): Free syscalls_to_catch. * remote-utils.c (prepare_resume_reply): Report syscall_entry and syscall_return stops. * server.h (UNKNOWN_SYSCALL, ANY_SYSCALL): Define. * server.c (handle_general_set): Handle QCatchSyscalls. (handle_query): Report support for QCatchSyscalls. * target.h (struct target_ops): Add supports_catch_syscall. (target_supports_catch_syscall): New macro. * linux-low.h (struct linux_target_ops): Add get_syscall_trapinfo. (struct lwp_info): Add syscall_state. * linux-low.c (handle_extended_wait): Mark syscall_state as an entry. Maintain syscall_state and syscalls_to_catch across exec. (get_syscall_trapinfo): New function, proxy to the_low_target. (linux_low_ptrace_options): Enable PTRACE_O_TRACESYSGOOD. (linux_low_filter_event): Toggle syscall_state entry/return for syscall traps, and set it ignored for all others. (gdb_catching_syscalls_p): New function. (gdb_catch_this_syscall_p): New function. (linux_wait_1): Handle SYSCALL_SIGTRAP. (linux_resume_one_lwp_throw): Add PTRACE_SYSCALL possibility. (linux_supports_catch_syscall): New function. (linux_target_ops): Install it. * linux-x86-low.c (x86_get_syscall_trapinfo): New function. (the_low_target): Install it. gdb/testsuite/ChangeLog: 2016-01-12 Josh Stone <jistone@redhat.com> Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/catch-syscall.c (do_execve): New variable. (main): Conditionally trigger an execve. * gdb.base/catch-syscall.exp: Enable testing for remote targets. (test_catch_syscall_execve): New, check entry/return across execve. (do_syscall_tests): Call test_catch_syscall_execve.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-10-19gdb: Improve syscall entry/return tracking on LinuxJosh Stone
The existing logic was simply to flip syscall entry/return state when a syscall trap was seen, and even then only with active 'catch syscall'. That can get out of sync if 'catch syscall' is toggled at odd times. This patch updates the entry/return state for all syscall traps, regardless of catching state, and also updates known syscall state for other kinds of traps. Almost all PTRACE_EVENT stops are delivered from the middle of a syscall, so this can act like an entry. Every other kind of ptrace stop is only delivered outside of syscall event pairs, so marking them ignored ensures the next syscall trap looks like an entry. Three new test scenarios are added to catch-syscall.exp: - Disable 'catch syscall' from an entry to deliberately miss the return event, then re-enable to make sure a new entry is recognized. - Enable 'catch syscall' for the first time from a vfork event, which is a PTRACE_EVENT_VFORK in the middle of the syscall. Make sure the next syscall event is recognized as the return. - Make sure entry and return are recognized for an ENOSYS syscall. This is to defeat a common x86 hack that uses the pre-filled ENOSYS return value as a sign of being on the entry side. gdb/ChangeLog: 2015-10-19 Josh Stone <jistone@redhat.com> * linux-nat.c (linux_handle_syscall_trap): Always update entry/ return state, even when not actively catching syscalls at all. (linux_handle_extended_wait): Mark syscall_state like an entry. (wait_lwp): Set syscall_state ignored for other traps. (linux_nat_filter_event): Likewise. gdb/testsuite/ChangeLog: 2015-10-19 Josh Stone <jistone@redhat.com> * gdb.base/catch-syscall.c: Include <sched.h>. (unknown_syscall): New variable. (main): Trigger a vfork and an unknown syscall. * gdb.base/catch-syscall.exp (vfork_syscalls): New variable. (unknown_syscall_number): Likewise. (check_call_to_syscall): Accept an optional syscall pattern. (check_return_from_syscall): Likewise. (check_continue): Likewise. (test_catch_syscall_without_args): Check for vfork and ENOSYS. (test_catch_syscall_skipping_return): New test toggling off 'catch syscall' to step over the syscall return, then toggling back on. (test_catch_syscall_mid_vfork): New test turning on 'catch syscall' during a PTRACE_EVENT_VFORK stop, in the middle of a vfork syscall. (do_syscall_tests): Call test_catch_syscall_without_args and test_catch_syscall_mid_vfork. (test_catch_syscall_without_args_noxml): Check for vfork and ENOSYS. (fill_all_syscalls_numbers): Initialize unknown_syscall_number.
2015-07-24Call gdb_exit before gdb_skip_xml_test on gdb.base/catch-syscall.expSergio Durigan Junior
The gdb_skip_xml_test procedure explicitly says that it cannot be invoked when GDB is running. However, the testcase for "catch syscall" is wrongly doing that, which is causing a failure on native-extended-gdbserver tests: new FAIL: gdb.base/catch-syscall.exp: set tdesc filename /home/gdb-buildbot/fedora-x86-64-3/fedora-x86-64-native-extended-gdbserver-m32/build/gdb/testsuite/outputs/gdb.base/catch-syscall/trivial.xml (got interactive prompt) This obvious commit fixes this, by calling gdb_exit before gdb_skip_xml_test. Checked in as obvious. gdb/testsuite/ChangeLog 2015-07-24 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.base/catch-syscall.exp: Call gdb_exit before gdb_skip_xml_test.
2015-07-07Enable multi-arch test in catch-syscall.exp on aarch64Yao Qi
This patch is to enable test_catch_syscall_multi_arch on aarch64. gdb/testsuite: 2015-07-07 Yao Qi <yao.qi@linaro.org> * gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set arch1, arch2, syscall1_name, syscall2_name and syscall_number.
2015-03-18Support catch syscall on aarch64 linuxYao Qi
Hi, This patch is to support catch syscall on aarch64 linux. We implement gdbarch method get_syscall_number for aarch64-linux, and add aarch64-linux.xml file, which looks straightforward, however the changes to test case doesn't. First of all, we enable catch-syscall.exp on aarch64-linux target, but skip the multi_arch testing on current stage. I plan to touch multi arch debugging on aarch64-linux later. Then, when I run catch-syscall.exp on aarch64-linux, gcc errors that SYS_pipe isn't defined. We find that aarch64 kernel only has pipe2 syscall and libc already convert pipe to pipe2. As a result, I change catch-syscall.c to use SYS_pipe if it is defined, otherwise use SYS_pipe2 instead. The vector all_syscalls in catch-syscall.exp can't be pre-determined, so I add a new proc setup_all_syscalls to fill it, according to the availability of SYS_pipe. Regression tested on {x86_64, aarch64}-linux x {native, gdbserver}. gdb: 2015-03-18 Yao Qi <yao.qi@linaro.org> PR tdep/18107 * aarch64-linux-tdep.c: Include xml-syscall.h (aarch64_linux_get_syscall_number): New function. (aarch64_linux_init_abi): Call set_gdbarch_get_syscall_number. * syscalls/aarch64-linux.xml: New file. gdb/testsuite: 2015-03-18 Yao Qi <yao.qi@linaro.org> PR tdep/18107 * gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New variable. * gdb.base/catch-syscall.exp: Don't skip it on aarch64*-*-linux* target. Remove elements in all_syscalls. (test_catch_syscall_multi_arch): Skip it on aarch64*-linux* target. (setup_all_syscalls): New proc.
2015-03-11Typo fixYao Qi
Fix typo "inferiorr". gdb/testsuite: 2015-03-11 Yao Qi <yao.qi@linaro.org> * gdb.base/catch-syscall.exp: Fix typo in comments.
2015-03-11Skip catch-syscall.exp on HP-UX targetYao Qi
"catch syscall" doesn't work on HP-UX. gdb/testsuite: 2015-03-11 Yao Qi <yao.qi@linaro.org> * gdb.base/catch-syscall.exp: Skip it on HP-UX target.
2015-03-04catch-syscall.exp: Fix missing architecture name for s390:31-bitAndreas Arnez
For the "multiple targets" test in catch-syscall.exp, set the 'arch1' variable to a valid string. gdb/testsuite/ChangeLog: * gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set the 'arch1' variable for "s390*-linux*" targets.
2015-02-27Don't skip catch-syscall.exp on hppa*-hp-hpux* targetYao Qi
As far as I know, "catch syscall" is supported on hppa*-hp-hpux*, but the test catch-syscall.exp is skipped on this target by mistake. This patch is to fix it. However, I don't have a hpux machine to test. gdb/testsuite: 2015-02-27 Yao Qi <yao.qi@linaro.org> * gdb.base/catch-syscall.exp: Don't skip it on hppa*-hp-hpux* target.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-11-20Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead ↵Sergio Durigan Junior
of global This patch intends to partially fix PR breakpoints/10737, which is about making the syscall information (for the "catch syscall" command) be per-arch, instead of global. This is not a full fix because of the other issues pointed by Pedro here: <https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5> However, I consider it a good step towards the real fix. It will also help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>. What this patch does, basically, is move the "syscalls_info" struct to gdbarch. Currently, the syscall information is stored in a global variable inside gdb/xml-syscall.c, which means that there is no easy way to correlate this info with the current target or architecture being used, for example. This causes strange behaviors, because the syscall info is not re-read when the arch changes. For example, if you put a syscall catchpoint in syscall 5 on i386 (syscall open), and then load a x86_64 program on GDB and put the same syscall 5 there (fstat on x86_64), you will still see that GDB tells you that it is catching "open", even though it is not. With this patch, GDB correctly says that it will be catching fstat syscalls. (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'open' [5]) But with the patch: (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'fstat' [5]) As I said, there are still some problems on the "catch syscall" mechanism, because (for example) the user should be able to "catch syscall open" on i386, and then expect "open" to be caught also on x86_64. Currently, it doesn't work. I intend to work on this later. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to set_xml_syscall_file_name to provide gdbarch. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * bfin-linux-tdep.c (bfin_linux_init_abi): Likewise. * breakpoint.c (print_it_catch_syscall): Adjust call to get_syscall_by_number to provide gdbarch. (print_one_catch_syscall): Likewise. (print_mention_catch_syscall): Likewise. (print_recreate_catch_syscall): Likewise. (catch_syscall_split_args): Adjust calls to get_syscall_by_number and get_syscall_by_name to provide gdbarch. (catch_syscall_completer): Adjust call to get_syscall_names to provide gdbarch. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gdbarch.sh: Forward declare "struct syscalls_info". (xml_syscall_file): New variable. (syscalls_info): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Adjust call to set_xml_syscall_file_name to provide gdbarch. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise. * xml-syscall.c: Include gdbarch.h. (set_xml_syscall_file_name): Accept gdbarch parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. (my_gdb_datadir): Delete global variable. (struct syscalls_info) <my_gdb_datadir>: New variable. (struct syscalls_info) <sysinfo>: Rename variable to "syscalls_info". (sysinfo): Delete global variable. (have_initialized_sysinfo): Likewise. (xml_syscall_file): Likewise. (sysinfo_free_syscalls_desc): Rename to... (syscalls_info_free_syscalls_desc): ... this. (free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust code to the new layout of "struct syscalls_info". (make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to "syscalls_info". (syscall_create_syscall_desc): Likewise. (syscall_start_syscall): Likewise. (syscall_parse_xml): Likewise. (xml_init_syscalls_info): Likewise. Drop "const" from return value. (init_sysinfo): Rename to... (init_syscalls_info): ...this. Add gdbarch as a parameter. Adjust function to deal with gdbarch. (xml_get_syscall_number): Delete parameter sysinfo. Accept gdbarch as a parameter. Adjust code. (xml_get_syscall_name): Likewise. (xml_list_of_syscalls): Likewise. (set_xml_syscall_file_name): Accept gdbarch as parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. * xml-syscall.h (set_xml_syscall_file_name): Likewise. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. gdb/testsuite/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function.
2014-05-16New command line option -D.Doug Evans
* NEWS: Mention it. * main.c (set_gdb_data_directory): New function. (captured_main): Recognize -D. Flag error for --data-directory "". Call set_gdb_data_directory. (print_gdb_help): Print --data-directory, -D. * main.h (set_gdb_data_directory): Declare. * top.c (staged_gdb_datadir): New static global. (set_gdb_datadir): Call set_gdb_data_directory (show_gdb_datadir): New function. (init_main): Update init of data-directory parameter. testsuite/ * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir): Update. (do_syscall_tests_without_xml): Update. doc/ * gdb.texinfo (Mode Options): Add -D.
2014-01-22gdb/ChangeLog:Andreas Arnez
* syscalls/s390x-linux.xml: New file. * syscalls/s390-linux.xml: New file. * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro. (XML_SYSCALL_FILENAME_S390X): Likewise. (op_svc): New enum value for SVC opcode. (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'. (s390_linux_get_syscall_number): New function. (s390_gdbarch_init): Register '*get_syscall_number' and the syscall xml file name. * data-directory/Makefile.in (SYSCALLS_FILES): Add "s390-linux.xml" and "s390x-linux.xml". * NEWS: Announce new feature. gdb/testsuite/ChangeLog: * gdb.base/catch-syscall.exp: Activate test on s390*-linux.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker
2013-12-19Fix PR breakpoints/16297: catch syscall with syscall 0Gabriel Krisman Bertazi
Code rationale ============== by: Gabriel Krisman Bertazi This is a fix for bug 16297. The problem occurs when the user attempts to catch any syscall 0 (such as syscall read on Linux/x86_64). GDB was not able to catch the syscall and was missing the breakpoint. Now, breakpoint_hit_catch_syscall returns immediately when it finds the correct syscall number, avoiding a following check for the end of the search vector, that returns a no hit if the syscall number was zero. Testcase rationale ================== by: Sergio Durigan Junior This testcase is a little difficult to write. By doing a quick inspection at the Linux source, one can see that, in many targets, the syscall number 0 is restart_syscall, which is forbidden to be called from userspace. Therefore, on many targets, there's just no way to test this safely. My decision was to take the simpler route and just adds the "read" syscall on the default test. Its number on x86_64 is zero, which is "good enough" since many people here do their tests on x86_64 anyway and it is a popular architecture. However, there was another little gotcha. When using "read" passing 0 as the third parameter (i.e., asking it to read 0 bytes), current libc implementations could choose not to effectively call the syscall. Therefore, the best solution was to create a temporary pipe, write 1 byte into it, and then read this byte from it. gdb/ChangeLog 2013-12-19 Gabriel Krisman Bertazi <gabriel@krisman.be> PR breakpoints/16297 * breakpoint.c (breakpoint_hit_catch_syscall): Return immediately when expected syscall is hit. gdb/testsuite/ChangeLog 2013-12-19 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/16297 * gdb.base/catch-syscall.c (read_syscall, pipe_syscall) (write_syscall): New variables. (main): Create a pipe, write 1 byte in it, and read 1 byte from it. * gdb.base/catch-syscall.exp (all_syscalls): Include "pipe, "write" and "read" syscalls. (fill_all_syscalls_numbers): Improve the way to obtain syscalls numbers.
2013-12-18Improve and fix catch-syscall.expSergio Durigan Junior
While fixing another bug, I found that the current gdb.base/catch-syscall.exp is kind of messy, could use some improvements, and is not correctly testing some things. I've made the following patch to address all the issues I found. On the organization side, it does a cleanup and removes unecessary imports of gdb_prompt, uses prepare_for_testing and clean_restart where needed, and fixes some comments. The testcase was also not correctly testing catching syscalls using only numbers, or catching many syscalls at once. I fixed that. The patch also uses a new method for obtaining the syscalls numbers: it relies on the C source file to get them, via <sys/syscall.h> and SYS_* macros. This makes the .exp file simpler because there is no need to include target conditionals there. I tested this on x86_64 Fedora 18. gdb/testsuite/ChangeLog: 2013-12-18 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.base/catch-syscall.c: Include <sys/syscall.h>. (close_syscall, chroot_syscall, exit_group_syscall): New variables. * gdb.base/catch-syscall.exp: Replace gdb_compile by prepare_for_testing. Call fill_all_syscalls_numbers before starting. Replace gdb_exit, gdb_start, gdb_reinitialize_dir and gdb_load by clean_restart. (check_info_bp_any_syscall, check_info_bp_specific_syscall) (check_info_bp_many_syscalls): Remove global gdb_prompt. (check_call_to_syscall): Likewise. Add global decimal. Improve testing regex. (check_return_from_syscall): Likewise. (check_continue, insert_catch_syscall_with_arg): Remove global gdb_prompt. (insert_catch_syscall_with_many_args): Likewise. Add global decimal. Fix $filter_str. Improve testing regex. (check_for_program_end): Remove global gdb_prompt. (test_catch_syscall_without_args): Likewise. Add global decimal. Improve testing regex. (test_catch_syscall_with_args, test_catch_syscall_with_many_args) (test_catch_syscall_with_wrong_args) (test_catch_syscall_restarting_inferior) (test_catch_syscall_fail_nodatadir): Remove global gdb_prompt. (do_syscall_tests): Likewise. Remove global srcdir. (test_catch_syscall_without_args_noxml): Remove global gdb_prompt. Add global last_syscall_number. Test for the exact syscall number to be caught. (test_catch_syscall_with_args_noxml): Remove global gdb_prompt. Add global all_syscalls_numbers. Test each syscall number to be caught, instead of only testing "close". (test_catch_syscall_with_wrong_args_noxml): Remove global gdb_prompt. (do_syscall_tests_without_xml): Likewise. Remove global srcdir. Remove stale comment. (fill_all_syscalls_numbers): Add global last_syscall_number. Fill the correct syscall numbers using information from the inferior.
2013-10-09Uniquefy gdb.base/catch-syscall.exp test names.Pedro Alves
catch-syscall.exp has a series of duplicated output in gdb.sum. This patch makes sure all test names are unique, using with_test_prefix. Tested on x86_64 Fedora 17. gdb/testsuite/ 2013-10-09 Pedro Alves <palves@redhat.com> * gdb.base/catch-syscall.exp (test_catch_syscall_without_args) (test_catch_syscall_with_args, test_catch_syscall_with_many_args) (test_catch_syscall_with_wrong_args) (test_catch_syscall_restarting_inferior) (test_catch_syscall_fail_nodatadir) (test_catch_syscall_without_args_noxml) (test_catch_syscall_with_args_noxml) (test_catch_syscall_with_wrong_args_noxml): Use with_test_prefix.
2013-08-22[Committing the `catch syscall' patch for ARM, from Samuel Bronson.]Sergio Durigan Junior
This time, it passes all the tests and comes with a nearly complete XML file (plus a script that can nearly regenerate the XML file). (I elected to leave out __ARM_NR_cmpxchg, since it has dire warnings to the effect that the only pieces of code that should be aware of it are the implementation and the __kuser_cmpxchg code in entry-armv.S.) gdb/ 2013-08-14 Samuel Bronson <naesten@gmail.com> ARM Linux support for `catch syscall'. * syscalls/arm-linux.py: New file. * syscalls/arm-linux.xml: Likewise. * arm-linux-tdep.c (arm_linux_get_syscall_number): New function. (arm_linux_init_abi): Register the new function and syscall xml file. * data-directory/Makefile.in: Install the new syscall xml file. * NEWS: Brag about this. gdb/testsuite/ 2013-08-14 Samuel Bronson <naesten@gmail.com> ARM Linux support for `catch syscall'. * gdb.base/catch-syscall.exp: Test this on ARM now. (fill_all_syscalls_numbers): ARM has close/chroot on 6/61, too.
2013-06-27test suite update - gdb.base/[cd]Tom Tromey
Convert files gdb.base/[cd]*.exp to use standard_output_file et al. * call-ar-st.exp, call-rt-st.exp, call-sc.exp, call-signal-resume.exp, call-strs.exp, callexit.exp, callfuncs.exp, catch-load.exp, catch-syscall.exp, charset.exp, checkpoint.exp, chng-syms.exp, code-expr.exp, code_elim.exp, commands.exp, completion.exp, complex.exp, cond-expr.exp, condbreak.exp, consecutive.exp, constvars.exp, corefile.exp, ctxobj.exp, cursal.exp, cvexpr.exp, dbx.exp, default.exp, define.exp, del.exp, detach.exp, dfp-test.exp, display.exp, dmsym.exp, dump.exp, dup-sect.exp: Use standard_testfile, standard_output_file, prepare_for_testing, clean_restart.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-11-02 * breakpoint.c (catch_syscall_completer): Pass 'word' as secondTom Tromey
argument to complete_on_enum. testsuite * gdb.base/catch-syscall.exp (do_syscall_tests): Add completion test.
2012-05-03gdb/testsuite:Yao Qi
* gdb.base/catch-syscall.exp: Skip it before compilation if target doesn't support. * gdb.base/foll-exec.exp, gdb.base/foll-fork.exp: Likewise. * gdb.base/foll-vfork.exp, gdb.multi/bkpt-multi-exec.exp: Likewise.
2012-01-04Copyright year update in most files of the GDB Project.Joel Brobecker
gdb/ChangeLog: Copyright year update in most files of the GDB Project.
2011-03-07gdbTom Tromey
* infrun.c (print_exited_reason): Include inferior id and pid in message. gdb/testsuite * lib/opencl.exp (skip_opencl_tests): Update for exit message change. * lib/mi-support.exp (mi_gdb_test): Update for exit message change. * lib/gdb.exp (gdb_test_multiple): Update comment. Update for exit message change. (skip_altivec_tests): Update for exit message change. (skip_vsx_tests): Likewise. (gdb_continue_to_end): Likewise. Add 'command' argument. * lib/cell.exp (skip_cell_tests): Update for exit message change. * gdb.threads/tls.exp: Update for exit message change. * gdb.threads/thread-unwindonsignal.exp: Use gdb_continue_to_end. * gdb.threads/step.exp (step_it): Update for exit message change. (continue_all): Likewise. * gdb.threads/print-threads.exp (test_all_threads): Update for exit message change. * gdb.threads/interrupted-hand-call.exp: Use gdb_continue_to_end. * gdb.threads/execl.exp: Use gdb_continue_to_end. * gdb.python/py-prettyprint.exp (run_lang_tests): Use gdb_continue_to_end. * gdb.hp/gdb.objdbg/objdbg02.exp: Use gdb_continue_to_end. * gdb.hp/gdb.objdbg/objdbg01.exp: Use gdb_continue_to_end. * gdb.hp/gdb.defects/solib-d.exp: Update for exit message change. * gdb.cp/method.exp: Update for exit message change. * gdb.cp/mb-templates.exp: Update for exit message change. * gdb.cp/mb-inline.exp: Use gdb_continue_to_end. * gdb.cp/annota3.exp: Update for exit message change. * gdb.cp/annota2.exp: Update for exit message change. * gdb.cell/fork.exp: Use gdb_continue_to_end. * gdb.base/term.exp: Update for exit message change. * gdb.base/step-test.exp (test_i): Update for exit message change. * gdb.base/sigstep.exp (advance): Update for exit message change. (advancei): Likewise. * gdb.base/siginfo.exp: Update for exit message change. * gdb.base/shlib-call.exp: Use gdb_continue_to_end. * gdb.base/reread.exp: Use gdb_continue_to_end. * gdb.base/langs.exp: Use gdb_continue_to_end. * gdb.base/interrupt.exp: Update for exit message change. * gdb.base/gdb1555.exp: Update for exit message change. * gdb.base/exe-lock.exp: Use gdb_continue_to_end. * gdb.base/ending-run.exp: Update for exit message change. * gdb.base/chng-syms.exp: Update for exit message change. * gdb.base/checkpoint.exp: Update for exit message change. * gdb.base/catch-syscall.exp (check_for_program_end): Use gdb_continue_to_end. (test_catch_syscall_with_wrong_args): Likewise. * gdb.base/call-signal-resume.exp: Use gdb_continue_to_end. * gdb.base/break-interp.exp (test_ld): Update for exit message change. * gdb.base/bang.exp: Update for exit message change. * gdb.base/attach.exp (do_attach_tests): Use gdb_continue_to_end. (do_call_attach_tests): Likewise. * gdb.base/a2-run.exp: Update for exit message change. * gdb.arch/ppc-dfp.exp: Update for exit message change. * gdb.ada/tasks.exp: Use gdb_continue_to_end. * gdb.ada/catch_ex.exp: Use gdb_continue_to_end.
2011-02-04gdb/David Daney
2011-02-04 David Daney <ddaney@caviumnetworks.com> * mips-linux-tdep.c: Include xml-syscall.h. (mips_linux_get_syscall_number): New function. (mips_linux_init_abi): Add calls to mips_linux_get_syscall_number() and set_xml_syscall_file_name(). * data-directory/Makefile.in (SYSCALLS_FILES): Add mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml * syscalls/mips-n32-linux.xml: New file. * syscalls/mips-n64-linux.xml: New file. * syscalls/mips-o32-linux.xml: New file. gdb/testsuite/ 2011-02-04 David Daney <ddaney@caviumnetworks.com> * gdb.base/catch-syscall.exp: Enable for mips*-linux*.
2011-01-01run copyright.sh for 2011.Joel Brobecker
2010-12-07 PR python/12227Doug Evans
* NEWS: Mention -data-directory. * main.c (captured_main): Recognize -data-directory. doc/ * gdb.texinfo (Mode Options): Document -data-directory. (Data Files): Add reference to -data-directory. testsuite/ * gdb.base/catch-syscall.exp (do_syscall_tests): Remove setting of data-directory. * lib/gdb-python.exp (gdb_check_python_config): Delete, all callers updated. * lib/gdb.exp (INTERNAL_GDBFLAGS): Add -data-directory.
2010-10-06 Create subdir data-directory.Doug Evans
* Makefile.in (XML_SYSCALL_DIR, XML_SYSCALL_FILES): Moved to data-directory/Makefile.in. (SUBDIRS): Add data-directory. (all): Remove xml-syscall-copy dependency. (xml-syscall-copy): Moved to data-directory/Makefile.in as stamp-syscalls. (xml-syscall-install): Moved to data-directory/Makefile.in as install-syscalls. (install-only): Remove xml-syscall-install dependency. (all-data-directory): New rule. (data-directory/Makefile): New rule. * configure.ac (AC_OUTPUT): Add data-directory/Makefile. * configure: Regenerate. * data-directory/Makefile.in: New file. * python/lib/gdb/__init__.py: New file. testsuite/ * gdb.base/catch-syscall.exp (do_syscall_tests): Update location of syscall staging area.
2010-06-012010-06-01 Michael Snyder <msnyder@vmware.com>Michael Snyder
* gdb.base/arithmet.exp: Use gdb_test_no_output. * gdb.base/arrayidx.exp: Ditto. * gdb.base/attach.exp: Ditto. * gdb.base/auxv.exp: Ditto. * gdb.base/bigcre.exp: Ditto. * gdb.base/break-always.exp: Ditto. * gdb.base/break-interp.exp: Ditto. * gdb.base/break.exp: Ditto. * gdb.base/breakpoint-shadow.exp: Ditto. * gdb.base/call-ar-st.exp: Ditto. * gdb.base/call-sc.exp: Ditto. * gdb.base/call-signal-resume.exp: Ditto. * gdb.base/callfuncs.exp: Ditto. * gdb.base/catch-syscall.exp: Ditto. * gdb.base/charset.exp: Ditto. * gdb.base/code-expr.exp: Ditto. * gdb.base/commands.exp: Ditto. * gdb.base/cond-expr.exp: Ditto. * gdb.base/condbreak.exp: Ditto. * gdb.base/cursal.exp: Ditto. * gdb.base/cvexpr.exp: Ditto. * gdb.base/default.exp: Ditto. * gdb.base/del.exp: Ditto. * gdb.base/detach.exp: Ditto. * gdb.base/display.exp: Ditto. * gdb.base/ena-dis-br.exp: Ditto. * gdb.base/eval-skip.exp: Ditto. * gdb.base/foll-fork.exp: Ditto. * gdb.base/foll-vfork.exp: Ditto. * gdb.base/frame-args.exp: Ditto. * gdb.base/funcargs.exp: Ditto. * gdb.base/gcore-buffer-overflow.exp: Ditto. * gdb.base/gdbvars.exp: Ditto. * gdb.base/help.exp: Ditto. * gdb.base/ifelse.exp: Ditto. * gdb.base/included.exp: Ditto. * gdb.base/list.exp: Ditto. * gdb.base/macscp.exp: Ditto. * gdb.base/maint.exp: Ditto. * gdb.base/multi-fork.exp: Ditto. * gdb.base/overlays.exp: Ditto. * gdb.base/page.exp: Ditto. * gdb.base/pending.exp: Ditto. * gdb.base/pointers.exp: Ditto. * gdb.base/pr11022.exp: Ditto. * gdb.base/prelink.exp: Ditto. * gdb.base/printcmds.exp: Ditto. * gdb.base/psymtab.exp: Ditto. * gdb.base/randomize.exp: Ditto. * gdb.base/relational.exp: Ditto. * gdb.base/relocate.exp: Ditto. * gdb.base/remote.exp: Ditto. * gdb.base/sepdebug.exp: Ditto. * gdb.base/set-lang-auto.exp: Ditto. * gdb.base/setshow.exp: Ditto. * gdb.base/setvar.exp: Ditto. * gdb.base/signals.exp: Ditto. * gdb.base/signull.exp: Ditto. * gdb.base/sigstep.exp: Ditto. * gdb.base/sizeof.exp: Ditto. * gdb.base/solib-disc.exp: Ditto. * gdb.base/store.exp: Ditto. * gdb.base/structs.exp: Ditto. * gdb.base/structs2.exp: Ditto. * gdb.base/subst.exp: Ditto. * gdb.base/term.exp: Ditto. * gdb.base/trace-commands.exp: Ditto. * gdb.base/unwindonsignal.exp: Ditto. * gdb.base/valgrind-db-attach.exp: Ditto. * gdb.base/varargs.exp: Ditto. * gdb.base/watch-cond.exp: Ditto. * gdb.base/watch_thread_num.exp: Ditto. * gdb.base/watchpoint-cond-gone.exp: Ditto. * gdb.base/watchpoint.exp: Ditto. * gdb.base/whatis-exp.exp: Ditto.
2010-05-242010-05-24 Michael Snyder <msnyder@vmware.com>Michael Snyder
* gdb.base/call-ar-st.exp: Replace send_gdb with gdb_test. * gdb.base/callfuncs.exp: Replace send_gdb with gdb_test. * gdb.base/call-rt-st.exp: Replace send_gdb with gdb_test. * gdb.base/call-signal-resume.exp: Replace send_gdb with gdb_test. * gdb.base/call-strs.exp: Replace send_gdb with gdb_test. * gdb.base/catch-syscall.exp: Replace send_gdb with gdb_test. * gdb.base/charset.exp: Replace send_gdb with gdb_test. * gdb.base/checkpoint.exp: Replace send_gdb with gdb_test. * gdb.base/commands.exp: Replace send_gdb with gdb_test. * gdb.base/condbreak.exp: Replace send_gdb with gdb_test. * gdb.base/cond-exprs.exp: Replace send_gdb with gdb_test. * gdb.base/consecutive.exp: Replace send_gdb with gdb_test. * gdb.base/constvars.exp: Replace send_gdb with gdb_test. * gdb.base/corefile.exp: Replace send_gdb with gdb_test.
2010-05-05Do not set prms_id/bug_id anymore.Joel Brobecker
2010-05-05 Joel Brobecker <brobecker@adacore.com> Remove the use of prms_id and bug_id throughout the testsuite.
2010-02-26gdb: Enable catch syscall test on sparc*-*-liunx and fix logic bug.David S. Miller
gdb/testsuite/ 2010-02-25 David S. Miller <davem@davemloft.net> * gdb.base/catch-syscall.exp: Allow to run on sparc*-*-linux and fix logic for setting all_syscalls_numbers.
2010-01-01Update copyright year in most headers.Joel Brobecker
Automatic update by copyright.sh.
2009-11-22 * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir)Pedro Alves
(do_syscall_tests_without_xml): Set data-directory to /the/path/to/nowhere.
2009-10-31gdb/ChangeLog:Sergio Durigan Junior
2009-31-10 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com> * breakpoint.c (catch_syscall_split_args): Remove unecessary warning displayed when the user provided a syscall name and there is no XML support. * xml-syscall.c: Renamed `_sysinfo' to `sysinfo'. (set_xml_syscall_file_name): Remove syscall_warn_user. (xml_init_syscalls_info): Remove warning. (init_sysinfo): Update warnings. gdb/testsuite/ChangeLog: 2009-31-10 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com> * gdb.base/catch-syscall.exp: Adapt the testcase in order to accept the modified warnings for catch syscall. Verify if GDB was compiled with support for lib expat, and choose which tests to run depending on this.
2009-09-15Forgot to add these files. They are referent to the last commit,Sergio Durigan Junior
"Implementing the catch syscall feature".
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-01 15:05:43 +0000